Photon-induced redox chemistry on pyrite promotes photoaging of polystyrene microplastics

Application of FTIR two-dimensional correlation spectroscopy (2D-COS) analysis in characterizing environmental behaviors of microplastics: A systematic review

Microplastics (MPs) are ubiquitous in the environment, continuously undergo aging processes and release toxic chemical substances. Understanding the environmental behaviors of MPs is critical to accurately evaluate their long-term ecological risk. Generalized two-dimensional correlation spectroscopy (2D-COS) is a powerful tool for MPs studies, which can dig more comprehensive information hiding in the conventional one-dimensional spectra, such as infrared (IR) and Raman spectra. The recent applications of 2D-COS in analyzing the behaviors and fates of MPs in the environment, including their aging processes, and interactions with natural organic matter (NOM) or other chemical substances, were summarized systematically. The main requirements and limitations of current approaches for exploring these processes are discussed, and the corresponding strategies to address these limitations and drawbacks are proposed as well. Finally, new trends of 2D-COS are prospected for analyzing the properties and behaviors of MPs in both natural and artificial environmental processes.

Selection of engineered degradation method to remove microplastics from aquatic environments

Microplastics (MPs) in the aquatic environment are difficult to degrade naturally due to their hydrophobicity and structure. A variety of engineered degradation methods were developed to treat MPs contamination in the aquatic environment. Current reviews of MPs degradation methods only provided an inventory but lacked systematic comparisons and application recommendations. However, selecting suitable degradation methods for different types of MPs contamination may be more effective. This work examined the present engineered degradation methods for MPs in the aquatic environment. They were categorized into chemical degradation, biodegradation, thermal degradation and photodegradation. These degradation methods were systematically summarized in terms of degradation efficiency, technical limitations and production of environmental hazards. Also, the potential influences of different environmental factors and media on degradation were analyzed, and the selection of degradation methods were suggested from the perspectives of contamination types and degradation mechanisms. Finally, the development trend and challenges for studying MPs engineered degradation were proposed. This work will contribute to a better selection of customized degradation methods for different types of MPs contamination scenarios in aquatic environments.

Dissolved Black Carbon Facilitates the Photodegradation of Microplastics via Molecular Weight-Dependent Generation of Reactive Intermediates

Photodegradation of microplastics (MPs) induced by sunlight plays a crucial role in determining their transport, fate, and impacts in aquatic environments. Dissolved black carbon (DBC), originating from pyrolyzed carbon, can potentially mediate the photodegradation of MPs owing to its potent photosensitization capacity. This study examined the impact of pyrolyzed wood derived DBC (5 mg C/L) on the photodegradation of polystyrene (PS) MPs in aquatic solutions under UV radiation. It revealed that the photodegradation of PS MPs primarily occurred at the benzene ring rather than the aliphatic segments due to the fast attack of hydroxyl radical (•OH) and singlet oxygen (1O2) on the benzene ring. The photosensitivity of DBC accelerated the degradation of PS MPs, primarily attributed to the increased production of •OH, 1O2, and triplet-excited state DBC (3DBC*). Notably, DBC-mediated photodegradation was related to its molecular weight (MW) and chemical properties. Low MW DBC (<3 kDa) containing more carbonyl groups generated more •OH and 1O2, accelerating the photodegradation of MPs. Nevertheless, higher aromatic phenols in high MW DBC (>30 kDa) scavenged •OH and generated more O2•-, inhibiting the photodegradation of MPs. Overall, this study offered valuable insights into UV-induced photodegradation of MPs and highlighted potential impacts of DBC on the transformation of MPs.

Molecular Weights of Dissolved Organic Matter Significantly Affect Photoaging of Microplastics

The fate of ubiquitous microplastics (MPs) is largely influenced by dissolved organic matter (DOM) in aquatic environments, which has garnered significant attention. The reactivity of DOM is reported to be greatly regulated by molecular weights (MWs), yet little is known about the effects of different MW DOM on MP aging. Here, the aging behavior of polystyrene MPs (PSMPs) in the presence of different MW fulvic acids (FAs) and humic acids (HAs) was systematically investigated. Under ultraviolet (UV) illumination, O/C of PSMPs aged for 96 h surged from 0.008 to 0.146 in the lower MW FA (FA<1kDa) treatment, suggesting significant PSMP aging. However, FA exhibited a stronger effect on facilitating PSMP photoaging than HA, which can be attributed to the fact that FA<1kDa contains more quinone and phenolic moieties, demonstrating a higher redox capacity. Meanwhile, compared to other fractions, FA<1kDa was more actively involved in the increase of different reactive species yields by 50-290%, including •OH, which plays a key role in PSMP photoaging, and contributed to a 25% increase in electron-donating capacity (EDC). This study lays a theoretical foundation for a better understanding of the environmental fate of MPs.

Tourmaline/pyrite dual mineral photocatalysis with a powerful surface electric field for efficient antibiotic removal

Pyrite (FeS2) has garnered attention due to its narrow bandgap, high light absorption, and low cost. However, the rapid recombination of charge carriers hinders its practical application. Surface electric field is a unique characteristic of tourmaline, which can induce effective separation of photo generated electrons and holes. This study successfully combined two directly mined natural minerals, tourmaline and pyrite, to form TFS. Characterization and experiments show that the surface electric field of tourmaline can significantly enhance the photocatalytic activity of TFS. Tetracycline (TC, 50 ppm) was degraded by 95% with 60 min, and the TFS reaction rate constant reached 0.0439 min-1, which is 6.1 times and 17.3 times higher than that of tourmaline and FeS2. Additionally, it significantly improved light absorption and charge carrier separation capabilities. After simulating various natural environmental factors, TFS demonstrated practicality. Considered analysis of active substances and detection revealed that h+ and 1O2 radicals are significant contributors, and the photocatalytic mechanism was proposed. Furthermore, the transformation pathways and toxicity of metabolites were studied. This research offers further inspiration and insights for improving photocatalytic material performance and the green governance environment of natural resources.

The environmental effects of microplastics and microplastic derived dissolved organic matter in aquatic environments: A review

Currently, microplastics (MPs) have ubiquitously distributed in different aquatic environments. Due to the unique physicochemical properties, MPs exhibit a variety of environmental effects with the coexisted contaminants. MPs can not only alter the migration of contaminants via vector effect, but also affect the transformation process and fate of contaminants via environmental persistent free radicals (EPFRs). The aging processes may enhance the interaction between MPs and co-existed contaminants. Thus, it is of great significance to review the aging mechanism of MPs and the influence of coexisted substances, the formation mechanism of EPFRs, environmental effects of MPs and relevant mechanism. Moreover, microplastic-derived dissolved organic matter (MP-DOM) may also influence the elemental biogeochemical cycles and the relevant environmental processes. However, the environmental implications of MP-DOM are rarely outlined. Finally, the knowledge gaps on environmental effects of MPs were proposed.

Pyrite from acid mine drainage promotes the removal of antibiotic resistance genes and mobile genetic elements in karst watershed with abundant calcium carbonate

More information is needed to fully comprehend how acid mine drainage (AMD) affects the phototransformation of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in karst water and sewage-irrigated farmland soil with abundant carbonate rocks (CaCO3) due to increasing pollution of AMD formed from pyrite (FeS2). The results showed FeS2 accelerated the inactivation of ARB with an inactivation of 8.7 log. Notably, extracellular and intracellular ARGs and mobile genetic elements (MGEs) also experienced rapid degradation. Additionally, the pH of the solution buffered by CaCO3 significantly influenced the photo-inactivation of ARB. The Fe2+ in neutral solution was present in Fe(II) coordination with strong reducing potential and played a crucial role in generating •OH (7.0 μM), which caused severe damage to ARB, ARGs, and MGEs. The •OH induced by photo-Fenton of FeS2 posed pressure to ARB, promoting oxidative stress response and increasing generation of reactive oxygen species (ROS), ultimately damaging cell membranes, proteins and DNA. Moreover, FeS2 contributed to a decrease in MIC of ARB from 24 mg/L to 4 mg/L. These findings highlight the importance of AMD in influencing karst water and sewage-irrigated farmland soil ecosystems. They are also critical in advancing the utilization of FeS2 to inactivate pathogenic bacteria.

Inhibition photooxidation of pyrite under illumination via altering photogenerated carrier migration pathways: Role of DTC-TETA surface passivation

The oxidation of pyrite is the main cause of acidic mine drainage (AMD), which is a very serious environmental problem in numerous mining areas around the world. Previous studies have shown that passivation agents create a hydrophobic film on the surface of pyrite, effectively isolating oxygen and water. However, the presence of abundant sulfide minerals in tailings ponds may exacerbate AMD when exposed to solar radiation, due to the semiconductor properties of pyrite. It remains uncertain whether the current surface passivation coating can effectively prevent the oxidation of pyrite under light conditions. This paper is the first to investigate the passivation effect as well as the mechanism of surface passivation coating on pyrite under illumination from the perspective of materials science. The results demonstrated that the triethylenetetramine-bisdithiocarbamate (DTC-TETA) passivation coating on pyrite almost completely suppressed the photooxidation of pyrite under illumination by changing the migration path of photogenerated charge carriers. The formation of NC(S)2-Fe chelating groups provides atomic-level interface channels for DTC-TETA to transfer electrons to pyrite and creates a favorable reduction environment for pyrite. Besides, DTC-TETA coating greatly improves the electron-hole pairs recombination efficiency of pyrite, which significantly inhibits the photogenerated electron reduction of oxygen to generate reactive oxygen species (ROS). Moreover, DTC-TETA coating captures the photogenerated holes, avoiding direct oxidation of pyrite by holes. Density functional theory (DFT) calculations revealed that the DTC-TETA coating increases the adsorption energy barrier for oxygen and water. The results extend the existing knowledge on passivation mechanisms on pyrite and hold significant implications for the future screening, evaluation, and practical application of surface passivating agents.

Sulfur Vacancies in Pyrite Trigger the Path to Nonradical Singlet Oxygen and Spontaneous Sulfamethoxazole Degradation: Unveiling the Hidden Potential in Sediments

Pharmaceutical residues in sediments are concerning as ubiquitous emerging contaminants. Pyrite is the most abundant sulfide minerals in the estuarine and coastal sediments, making it a major sink for pharmaceutical pollutants such as sulfamethoxazole (SMX). However, research on the adsorption and redox behaviors of SMX on the pyrite surface is limited. Here, we investigated the impact of the nonphotochemical process of pyrite on the fate of coexisting SMX. Remarkably, sulfur vacancies (SVs) on pyrite promoted the generation of nonradical species (hydrogen peroxide, H2O2 and singlet oxygen, 1O2), thereby exhibiting prominent SMX degradation performance under darkness. Nonradical 1O2 contributed approximately 73.1% of the total SMX degradation. The SVs with high surrounding electron density showed an advanced affinity for adsorbing O2 and then initiated redox reactions in the sediment electron-storing geobattery pyrite, resulting in the extensive generation of H2O2 through a two-electron oxygen reduction pathway. Surface Fe(III) (hydro)oxides on pyrite facilitated the decomposition of H2O2 to 1O2 generation. Distinct nonradical products were observed in all investigated estuarine and coastal samples with the concentrations of H2O2 ranging from 1.96 to 2.94 μM, while the concentrations of 1O2 ranged from 4.63 × 10-15 to 8.93 × 10-15 M. This dark-redox pathway outperformed traditional photochemical routes for pollutant degradation, broadening the possibilities for nonradical species use in estuarine and coastal sediments. Our study highlighted the SV-triggered process as a ubiquitous yet previously overlooked source of nonradical species, which offered fresh insights into geochemical processes and the dynamics of pollutants in regions of frequent redox oscillations and sulfur-rich sediments.

Mechanisms of arsenic oxidation in the presence of pyrite: An experimental and theoretical study

The mobility and toxicity of arsenic are significantly influenced by the natural minerals. A comprehensive understanding of the interaction between arsenic and minerals is crucial for elucidating the natural behavior of arsenic and advancing arsenic remediation strategies. In this study, the mechanism of As (III) oxidation in the presence of pyrite without light irritation was investigated by experimental and theoretical approaches. Quenching experiment and electron paramagnetic resonance analysis confirm •OH and •O2H is the predominant oxidant of As (III) under acidic and alkaline condition, respectively. Density Functional Theory (DFT) calculations indicate on the pyrite surface, the surface oxygen species is insignificant in As(III) oxidation but crucial for the generation of reactive oxygen species (ROS). In the solution, •OH, •O2H, Fe(IV), and 1O2 are the favored oxidants for As(III), while ROS, 3O2, and Fe(III) possess the capability to convert As(IV) to As(V). The major mechanism of As(III) oxidation in the presence of pyrite without light irritation primarily involves three elementary reactions: (1) •OH facilitating As(III) conversion to As(IV), (2) 3O2 oxidizing As(IV) to As(V) and •O2H, and (3) As(V) and •OH generating in •O2H reacting with As(III). As(IV) emerges as a critical intermediate capable of initiating chain reactions in arsenic oxidation. This study provides atomic-scale insight into the As(III) oxidation in pyrite suspension, which is important for understanding arsenic behavior in analogous oxidation systems.

Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling

The processes by which small nanoplastics (NPs) accumulate in soil are unclear. To clarify the different deposition processes that affect small NPs (< 30 nm) compared to larger NPs in the soil environment, due to their interaction with clays as major soil components, the transport behavior of two-sized NPs (20 and 80 nm) with two clays (diatomite (Diat) and montmorillonite (Mont)) in NaCl and CaCl2 solutions were investigated in water-saturated quartz sand columns. The experimental results showed that more 20 nm NPs could enter the lattice structure of Diat than Mont in NaCl solution. This contributed to the stronger deposition of 20 nm NPs by Diat on sand, which was associated with a lower k1d/k1 value (obtained from two-site kinetic attachment model). In contrast, 80 nm NPs had a stronger reversible retention than 20 nm NPs with Mont, even though both sizes of NPs-Mont displayed a similar transportability. In CaCl2 solution, the larger NPs-Mont hetero-aggregates formed with a stronger suppressed depth of φmax based on Derjaguin-Landau-Verwey-Overbeek theory. Thus, Mont had a stronger transport inhibition than Diat for both NPs sizes, with a lower k1d/k1. These findings could benefit in predicting the size-based deposition of NPs in a heterogenous soil environment.

Comprehensive understanding of the aging and biodegradation of polystyrene-based plastics

The extensive utilization and inadequate handling of plastics have resulted in severe environmental ramifications. In particular, plastics composed solely of a carbon-carbon (C-C) backbone exhibit limited degradation due to the absence of hydrolyzable functional groups. Plastics with enduring longevity in the natural environment are susceptible to environmental factors and their intrinsic properties, subsequently undergoing a series of aging processes that culminate in biodegradation. This article focuses on polystyrene (PS), which constitutes 20% of total plastic waste, as a case study. Initially, the application of PS in life and the impacts it poses are introduced. Following that, the key factors influencing the aging of PS are discussed, primarily encompassing its properties (e.g., surface characteristics, additives) and environmental factors (e.g., water matrices, biofilms). Lastly, an overview of microbial degradation of PS is provided, including potential microorganisms involved in PS degradation (bacteria, fungi, algae, and insects), four processes of microbial degradation (colonization, bio-fragmentation, assimilation, and mineralization), and potential mechanisms of microbial degradation. This study provides a comprehensive understanding of the multifaceted influences affecting the aging and biodegradation mechanisms of PS, thereby contributing valuable insights for the future management of plastic pollution.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Microplastics distribution in river side bars: The combined effects of water level and wind intensity

Rivers are the main pathway for microplastics (MP) transport toward the ocean. However, the understanding of the processes involved in the deposition and mobilization of MP in rivers, specifically in sediment side bars (SB), remains very limited. The objectives of this study were: (i) to examine the effect of hydrometric fluctuations and wind intensity on the distribution of microplastics (MP < 5 mm) in the SB of large river (the Paraná River), (ii) to determine the characteristics of MP to infer their origin and fate, and (iii) to discuss potential similarities or differences between MP suspended in the water column and MP found in sediment. The SB and water column were sampled during the autumn, winter, and spring of 2018, and the summer of 2019 at different river discharges and wind intensities. >90 % of the MP items found were fiber of polyethylene terephthalate (PET; FT-IR analysis), the most common MP color was blue, and most were in the 0.5-2 mm size range. The concentration/composition of MP varied according to the river discharge and wind intensity. During the falling limb of the hydrograph when discharge is decreasing and sediments are exposed for short periods (13-30 days), MP particles transported by the flow were deposited on temporarily exposed SB, accumulating there in high densities (309-373 items/kg). However, during the drought, when sediments remained exposed for a long time (259 days), MP were mobilized and transported by the wind. During this period (no influence of the flow), MP densities significantly decreased on SB (39-47 items/kg). In conclusion, both hydrological fluctuations and wind intensity played a significant role in MP distribution in SB.

Effect of polystyrene microplastics on tetracycline photoconversion under simulated sunlight: Vital role of aged polystyrene

Photoconversion of tetracycline (TC) has been widely reported. However, the effect of microplastics (MPs) on TC conversion kinetics and mechanism has rarely been discussed. In this study, we investigated the effect of (aged) MPs on TC degradation under simulated sunlight and elucidated the underlying mechanism. Our findings demonstrated that the physical and chemical properties of polystyrene (PS), such as particle size, surface groups, and morphology, were significantly altered after aging. Moreover, photoconversion efficiency of TC was suppressed with the spiking of aged PS, while virgin PS showed an opposite tendency. The photodegradation reaction for photosensitization of PS involved 1O2 and HO·. The light-screening effect of aged PS occupied predominance, weakening the direct UV-light absorption of TC and resulting in lower TC degradation efficiency. Additionally, triplet-excited state PS was generated after photon acceptance by aged PS, which could transfer energy to O2, leading to the production of 1O2. The toxicity test manifested that the direct impact of TC products on fathead minnow was ignorable, but long-term negative effects on growth deserved observation. This study enhances our understanding of the environmental fate of PS and TC under sunlight, and provides crucial reference information for better evaluating the potential risk of MPs and chemicals.

Fate and environmental behaviors of microplastics through the lens of free radical

Microplastics (MPs), as plastics with a size of less than 5 mm, are ubiquitously present in the environment and become an increasing environmental concern. The fate and environmental behavior of MPs are significantly influenced by the presence of free radicals. Free radicals can cause surface breakage, chemical release, change in crystallinity and hydrophilicity, and aggregation of MPs. On the other hand, the generation of free radicals with a high concentration and oxidation potential can effectively degrade MPs. There is a limited review article to bridge the fate and environmental behaviors of MP with free radicals and their reactions. This paper reviews the sources, types, detection methods, generation mechanisms, and influencing factors of free radicals affecting the environmental processes of MPs, the environmental effects of MPs controlled by free radicals, and the degradation strategies of MPs based on free radical-associated technologies. Moreover, this review elaborates on the limitations of the current research and provides ideas for future research on the interactions between MPs and free radicals to better explain their environmental impacts and control their risks. This article aims to keep the reader abreast of the latest development in the fate and environmental behaviors of MP with free radicals and their reactions and to bridge free radical chemistry with MP control methodology.

Oxalic-activated minerals enhance the stabilization of polypropylene and polyamide microplastics in soil: Crucial roles of mineral dissolution coupled surface oxygen-functional groups

Low-molecular-weight organic acids (LMWOAs) prevalent in soil environments may influence the transport, fate, and orientation of microplastics (MPs) by mediating mineral interfaces. Nevertheless, few studies have reported their impact on the environmental behavior of MPs in soil. Here, the functional regulation of oxalic at mineral interfaces and its stabilizing mechanism for MPs were investigated. The results showed that oxalic drove MPs stability onto minerals and new adsorption pathways, which are dependent on the bifunctionality of minerals induced by oxalic acid. Besides, our findings reveal that in the absence of oxalic acid, the stability of hydrophilic and hydrophobic MPs on kaolinite (KL) mainly displays hydrophobic dispersion, whereas electrostatic interaction is dominant on ferric sesquioxide (FS). Moreover, the amide functional groups ([NHCO]) of PA-MPs may have positive feedback on the stability of MPs. In the presence of oxalic acid (2-100 mM), the MPs stability efficiency and property onto minerals were integrally increased in batch studies. Our results demonstrate the oxalic acid-activated interfacial interaction of minerals via dissolution coupled O-functional groups. Oxalic-induced functionality at mineral interfaces further activates electrostatic interaction, cation bridge effect, hydrogen forces, ligand exchange and hydrophobicity. These findings provide new insights into the regulating mechanisms of oxalic-activated mineral interfacial properties for environmental behavior of emerging pollutants.

Mechanism insight into the facet-dependent photoaging of polystyrene microplastics on hematite in freshwater

Hematite, as an extensive natural mineral with multiple crystal facets, profoundly affects the migration and transformation of pollutants in the natural environment. However, little is known about the photochemical behavior of microplastics on different facets of hematite in the aquatic environment. In this work, the photoaging of polystyrene microplastics (PS-MPs) on different crystal planes ({001}, {100}, and {012} facets) and related mechanisms were studied. Two-dimensional correlation spectroscopy analysis illustrated that the reaction pathways of PS-MPs photoaging on hematite tended to preferential chemical oxidization. The stronger performance of PS-MPs photoaging, expressed by particle size reduction and surface oxidation, was observed on the {012} crystal facet. Under irradiation, {012} facet-dominated hematite with a narrower bandgap (1.93 eV) reinforced the photogenerated charge carrier separation, and the lower activation energy barrier (1.41 eV calculated from density functional theory) led to effective •OH formation from water oxidation. These findings elucidate the underlying photoaging mechanism of MPs on hematite with different mineralogical phases.

Ageing characteristics and microplastic release behavior from rainwater facilities under ROS oxidation

Reactive oxygen species (ROS) are ubiquitous in the natural environment that are generated by chemical or biochemical processes. Plastic rainwater facilities, as an important part of modern rainwater systems, are inevitably deteriorated by ROS. As a consequence, microplastics will be released. However, information on how ROS affect the ageing characteristics of plastic rainwater facilities and the subsequent microplastic release behavior is still insufficient. To address this knowledge gap, Fenton reagents were used to simulate the reactive oxygen species (ROS) induced ageing process of three typical plastic rainwater components (rainwater pipe, made of polyvinyl chloride; modular storage tank, made of polypropylene; inspection well, made of high-density polyethylene) and the subsequent microplastic release behavior. After 6 days of Fenton ageing, an increase in sharpness, holes, and fractures on the rainwater facilities' surface was observed by scanning electron microscope (SEM). The functional group changes on the rainwater facilities' surface were analyzed by Fourier transform infrared spectrometer (FTIR) and two-dimensional correlation spectroscopy (2D-COS) and compared with the results of X-ray photoelectron spectroscopy (XPS). During the ageing process, oxygen-containing functional groups were generated and the carbon chains were broken, which promoted peeling and the release of microplastics. The amount of released microplastics (ranging from 158 to 6617 items/g facility) varied with the type of rainwater facilities, and the order was modular storage tank > inspection well > rainwater pipe. The release amount increased with ageing time, and a significant linear relationship was observed (r² > 0.91). The particle size of the released microplastics ranged from 2 to 1362 μm, among which 10-30 μm particles accounted for the largest proportion (62.7 %). The release amount increased exponentially with decreasing particle size (r² > 0.71). This study indicates that large amounts of microplastics could be released from plastic rainwater components during ROS-induced ageing.

Polystyrene microplastics reduce Cr(VI) and decrease its aquatic toxicity under simulated sunlight

Microplastics (MPs) serve as vectors for chromium (Cr), influencing its fate and toxicity in aquatic environments, and have attracted much attention recently. However, it is still unknown whether MPs mediate Cr species transformation under sunlight irradiation. This study confirmed that polystyrene (PS) MPs could reduce Cr(VI) to Cr(III) under sunlight irradiation, with a photoreduction rate constant of 0.0023 h^-1. PS MPs-mediated Cr(VI) reduction was predominantly dependent on O₂^•- and simultaneously suppressed by ¹O₂, •OH and ³PS* . Aged PS MPs were exposed to simulated sunlight irradiation for 0, 200, 500, and 800 h, and Cr(VI) reduction was hindered by increased ¹O₂ and •OH formation and light-screening effects (decreased photon absorption). The size, functional groups and concentration of PS MPs and environmental factors (e.g., humic acid, pH, Mg²⁺, Fe³⁺ and O₂) strongly affected Cr(VI) reduction. Furthermore, Cr(VI) reduction induced by PS MPs could occur in reservoir water, and the reduction rate was faster than that in double distilled (DD) water. Correspondingly, PS MPs (1 mg/L) decreased the oxidative stress induced by Cr(VI) to Lemna minor in reservoir water after 96 h of sunlight irradiation. This study provided deep insight into how PS MPs affect Cr species transformations and hazardous effects in realistic aquatic environments under sunlight conditions.

Assessment of relationship between aging and contaminant-carryover for different filter layer of surgical mask under urban environmental stressors

Abundant disposable surgical masks (SMs) remain in the environment and continue to age under urban environmental stressors. This study aimed to investigate the aging characteristics of SMs and the effect of different aged layers of SMs on phenanthrene (PHE), tylosin (TYL), and sulfamethazine (SMT) under two different urban environmental stressors (UV and ozone). The results show that UV exposure causes more severe aging of the SM layers than ozone. The middle layer, made of melt-brown fabric, has displayed the highest degree of aging due to its smaller diameter and mechanical strength. The two-dimensional correlation spectroscopy (2D-COS) analysis reveals the different aging sequences of functional groups and three layers in aged SMs under the two urban environmental stressors. Whether the SMs are aged or not, the adsorptions of three organic pollutants on SMs are positively correlated with the octanol-water partition coefficient. Furthermore, except for the dominant hydrophobic interaction, aged SMs can promote the adsorption of three organic pollutants by accessory interactions (hydrogen bonding and partition), depending on their structures. These findings highlight the environmental effects of new microplastic (MP) sources and coexisting pollutants under the influence of COVID-19, which is helpful in accurately evaluating the biological toxicity of SMs.

Aging dependent plastic bag derived-microplastics as a vector of metals in lake water

The adsorption of microplastics (MPs) for metals in aquatic environment remains poorly understood due to the use of either commercial MPs, which have different property from the MPs in environments, or artificial solutions, which have not only the significantly higher concentration of metals than natural aqueous environment but also the different natures. In this study, we elaborated the adsorption throughout the aging process of plastic bag derived-MPs (initially 1-2 mm) by potassium persulfate (K₂S₂O₈) solution to metals in lake water. Comparatively, plastic bag derived-MPs had the highest adsorption capacity for Zn²⁺ followed by Fe³⁺, Pb²⁺, Mn²⁺, Cr⁶⁺, Ni²⁺, Cu²⁺ and Cd²⁺, which is not completely consistent with the literature. Both the adsorption capacity and distribution coefficients of Cu²⁺, Ni²⁺, Zn²⁺, Mn²⁺ and Pb²⁺ had significant linear correlation with carbonyl index (p < 0.05). Although the aging overall enhanced the adsorption, the adsorption capacities of MPs might fluctuate depending on metal.

Aging of poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends under different conditions: Environmental concerns on biodegradable plastic

Biodegradable plastics (BPs) have been used to replace conventional plastics owing to their environmental harmless and ease of degradation. However, the aging processes of BPs in different environments remain unclear. In this study, we used poly (lactic acid)/poly (butylene adipate-co-terephthalate) (PLA/PBAT) films as model BPs and investigated the 30-d aging behavior of PLA/PBAT films under four conditions (i.e., air without ultraviolet (UV) irradiation, water without UV irradiation, air with UV irradiation, and water with UV irradiation). Our results showed that the aging of PLA/PBAT films was insignificant in all groups except the water with UV irradiation group. In the physical characterization, the PLA/PBAT films exhibited layered structures in water with UV irradiation condition, and the submicron- and nano-sized particles adhered to the bigger-sized fragments. In the chemical characterization, the carbonyl index (CI) of PLA/PBAT films in water with UV irradiation condition decreased from 3.84 to 1.36, and the oxygen-to-carbon (O/C) ratio reached a maximum of 1.78 at 20 d and declined to 0.49 at 30 d, indicating that the oxygen-containing functional groups underwent bond breaking and showed a rapid aging process. This is mainly attributed to the combined effect of hydrolysis and photolysis increases the contact area of PLA/PBAT films and accelerates the aging process. Furthermore, based on two-dimensional correlation spectroscopy (2D-COS) analysis, we suggest that free radicals generated in water with UV irradiation conditions also accelerate the aging process of PLA/PBAT films. This study explored the aging processes of PLA/PBAT films under different conditions, which could aid in clarifying the environmental behavior and provide further information to assess the potential risks of BPs.

Molecular Oxygen Activation by Citric Acid Boosted Pyrite-Photo-Fenton Process for Degradation of PPCPs in Water

Pyrite has been used in photo-Fenton reactions for the degradation of pollutants, but the application of photo-Fenton processes with extra H₂O₂ in real water/wastewater treatment has still been limited by the economic cost of H₂O₂ and artificial light sources. Herein, citric acid (CA) and simulated/natural sunlight are used to develop a pyrite-based photo-Fenton system (pyrite-CA-light) in situ generating H₂O₂ through the enhanced activation of molecular oxygen. The degradation of pharmaceuticals and personal care products (PPCPs), especially acetaminophen (APAP) as the main target pollutant, in the pyrite-CA-light system was investigated. The effects of influencing factors such as various organic acids, APAP concentration, pH, pyrite dosage, CA concentration and co-existing anions (HCO₃^-, Cl^-, NO₃^-, SO₄^2- and H₂PO₄^-) were examined. At a pyrite dosage of 0.1 g L^-1, CA concentration of 0.6 mM and an initial pH of 6.0, the degradation efficiency of APAP (30 μM) was 99.1% within 30 min under the irradiation of xenon lamp (70 W, λ ≥ 350 nm). Almost the same high efficiency of APAP degradation (93.9%) in the system was achieved under natural sunlight irradiation (ca. 650 W m^-2). The scavenging experiments revealed that the dominant active species for degrading APAP was hydroxyl radical (HO^•). Moreover, a quantitative structural-activity relationship (QSAR) model for pseudo-first-order rate constants (k_obs) was established with a high significance (R² = 0.932, p = 0.001) by using three descriptors: octanol-water partition coefficient (logKow), dissociation constant (pK_a) and highest occupied molecular orbital (HOMO). This work provides an innovative strategy of the photo-Fenton process for the degradation of PPCPs using natural minerals and ordinary carboxylic acid under sunlight.

Straw Biochar at Different Pyrolysis Temperatures Passivates Pyrite by Promoting Electron Transfer from Biochar to Pyrite

To control acid mine drainage (AMD) at source, biochar, a new green and environmentally friendly passivator has been introduced to passivate pyrite. However, the raw material and pyrolysis temperature largely determine the physical and chemical properties of biochar, the causal relationship between biochar and pyrite and the underlying mechanism are still unknown. Here, biochar materials (rice-straw biochar (RSB) and sugarcane bagasse biochar (SBB)) at different pyrolysis temperatures (300–600 °C) were utilized for the passivation of pyrite. The results of our investigations revealed that the passivation ability of RSB was superior to that of SBB. The addition of RSB with higher pyrolysis temperatures could greatly enhance the passivation efficiency of pyrite. RSB-500 (produced at a pyrolysis temperature of 500 °C) achieved the best passivation effect on pyrite. RSB can form Fe-O bonds through C=O bonding with pyrite. Moreover, the addition of RSB created a reducing environment in the mixture system because of its strong electron-donation capacity (EDC) and altered the energy-band structure of pyrite, which promoted the transfer of electrons from biochar to pyrite. On the contrary, the addition of SBB did not result in the formation of Fe-O bonds with pyrite. In addition, the EDC of SBB was also lower than that of RSB and it had almost no effect on the band structure of pyrite. Hence it did not alter the direction of the electron migration. These findings shed light on the mechanism of biochar passivation of pyrite and provide a theoretical foundation for selecting suitable biochar materials for AMD prevention at source.