Nanostructured photocatalysts for the abatement of contaminants by photocatalysis and photocatalytic ozonation: An overview

Photocatalytic degradation of 2,4-dichlorophenoxyacetic acid by electrospun TiO2 nanofibres synthesised from two different titanium molecular precursors

The evaluation of the photocatalytic properties of electrospun TiO2 nanofibres (TiO2-NFs) synthesised in the same experimental conditions using two distinct precursors, tetraisopropyl orthotitanate (TTIP) and tetrabutyl orthotitanate (TNBT), with morphology and crystalline structure controlled by annealing at 460 °C for 3 h is presented. The presence of circular-shaped TiO2-NFs was corroborated by scanning electron microscopy (SEM). By using X-ray photoelectron spectroscopy (XPS), the chemical binding energies and their interactions of the TiO2 with the different incorporated impurities were determined; the most intense photoelectronic transitions of Ti 2p3/2 (458.39 eV), O 1 s (529.65 eV) and C 1 s (284.51 eV) were detected for TTIP and slightly blue-shifted for TNBT. By using energy-dispersive X-ray spectroscopy (EDS), the chemical element percentages in TiO2 were determined. Using X-ray diffraction, it was found that the annealed electrospun TiO2-NFs presented the anatase crystalline phase and confirmed by Raman scattering. Bandgap energies were determined by diffuse reflectance spectroscopy at room temperature. The photocatalytic degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide under exposure to ultraviolet light was studied using the TiO2-NFs obtained with the two molecular precursors. The results showed that the catalyst, prepared with the TTIP precursor, turned out to be the one that presented the highest photocatalytic activity with a half-life time (t1/2) of 28 min and a degradation percentage of 93%. The total organic carbon (TOC) in the solutions resulting from the 2,4-D degradation by the TiO2-NFs was measured, which showed a TOC removal of 50.67% for the TTIP sample and 36.14% for the TNBT sample. Finally, by using FTIR spectroscopy, the final chemical compounds of the degradation were identified as H2O and CO2.

Synthesis and Characterization of Composite WO3 Fibers/g-C3N4 Photocatalysts for the Removal of the Insecticide Clothianidin in Aquatic Media

Photocatalysis is a prominent alternative wastewater treatment technique that has the potential to completely degrade pesticides as well as other persistent organic pollutants, leading to detoxification of wastewater and thus paving the way for its efficient reuse. In addition to the more conventional photocatalysts (e.g., TiO2, ZnO, etc.) that utilize only UV light for activation, the interest of the scientific community has recently focused on the development and application of visible light-activated photocatalysts like g-C3N4. However, some disadvantages of g-C3N4, such as the high recombination rate of photogenerated charges, limit its utility. In this light, the present study focuses on the synthesis of WO3 fibers/g-C3N4 Z-scheme heterojunctions to improve the efficiency of g-C3N4 towards the photocatalytic removal of the widely used insecticide clothianidin. The effect of two different g-C3N4 precursors (urea and thiourea) and of WO3 fiber content on the properties of the synthesized composite materials was also investigated. All aforementioned materials were characterized by a number of techniques (XRD, SEM-EDS, ATR-FTIR, Raman spectroscopy, DRS, etc.). According to the results, mixing 6.5% W/W WO3 fibers with either urea or thiourea derived g-C3N4 significantly increased the photocatalytic activity of the resulting composites compared to the precursor materials. In order to further elucidate the effect of the most efficient composite photocatalyst in the degradation of clothianidin, the generated transformation products were tentatively identified through UHPLC tandem high-resolution mass spectroscopy. Finally, the detoxification effect of the most efficient process was also assessed by combining the results of an in-vitro methodology and the predictions of two in-silico tools.

Dipole moment regulation for enhancing internal electric field in covalent organic frameworks photocatalysts

Covalent organic frameworks (COFs) have recently emerged as a kind of promising photocatalytic platform in addressing the growing threat of trace pollutants in aquatic environments. Along this, we propose a strategy of constructing internal electric field (IEF) in COFs through the dipole moment regulation, which intrinsically facilitates the separation and transfer of photogenerated excitons. Two COFs of BTT-TZ-COF and BTT-TB-COF are developed by linking the electron-donor of benzotrithiophene (BTT) block and the electron-acceptor of triazine (TZ) or tribenzene (TB) block, respectively. DFT calculations demonstrate TZ block with larger dipole moment can achieve more efficient IEF due to the stronger electron-attractive force and hence narrower bandgap. Moreover, featuring the highly-order crystalline structure for accelerating photo-excitons transfer and rich porosity for facilitating the adsorption, BTT-TZ-COF exhibited an excellent universal performance of photocatalytic degradations of various dyes. Specifically, a superior photodegradation efficiency of 99% Rhodamine B (RhB) is achieved within 20 min under the simulated sunlight. Therefore, this convenient construction approach of enhanced IEF in COFs through rational regulation of the dipole moment can be a promising way to realize high photocatalytic activity.

Is photoelectrocatalysis an efficient process to degrade endocrine disruptors chemicals?

Endocrine disruptors chemicals (EDCs) pose significant health risks, including cancer, behavioral disorders, and infertility. In this study, we employed the photoelectrocatalysis (PEC) technique with optimized tungsten oxide (WO3) nanostructures as a photoanode to degrade three diverse EDCs: methiocarb, dimethyl phthalate, and 4-tert-butylphenol. PEC degradation tests were carried out for individual contaminants and a mixture of them, assessing efficiency across different EDC families. Ultra High-Performance Liquid Chromatography and Mass Spectrometry was used to control the course of the experiments. For individual solutions, 4-tert-butylphenol and methiocarb were 100% degraded at 1 hour of PEC degradation. Among the tested EDCs, dimethyl phthalate showed the highest resistance to degradation when treated individually. However, when assessed in a mixture with the other EDCs, the degradation efficiency of dimethyl phthalate increased compared to its individual treatment. Furthermore, four degradation intermediates were identified for each contaminant. Finally, toxicity tests revealed that the initial solution was more toxic than the samples treated for all the contaminants tested, except for the phthalate.

A H2O2 Oxidation Approach to Ti3C2/TiO2 for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water

To develop versatile photocatalysts for efficient degradation of distinct organic pollutants in water is a continuous pursuit in environment remediation. Herein, we directly oxidize Ti3C2 MXene with hydrogen peroxide to produce C-doped anatase TiO2 nanowires with aggregates maintaining a layered architecture of the MXene. The Ti3C2 MXene provides a titanium source for TiO2, a carbon source for in situ C-doping, and templates for nanowire aggregates. Under UV light illumination, the optimized Ti3C2/TiO2 exhibits a reaction rate constant 1.5 times that of the benchmark P25 TiO2 nanoparticles, toward photocatalytic degradations of trace phenol in water. The mechanism study suggests that photogenerated holes play key roles on the phenol degradation, either directly oxidizing phenol molecules or in an indirect way through oxidizing first the surface hydroxyl groups. The unreacted Ti3C2 MXene, although with trace amounts, is supposed to facilitate electron transfer, which inhibits charge recombination. The unique nanostructure of layered aggregates of nanowires, abundant surface oxygen vacancies arising from the carbon doping, and probably the Ti3C2/TiO2 heterojunction guarantee the high photocatalytic efficiency toward removals of organic pollutants in water. The photocatalyst also exhibits an activity superior to, or at least comparable to, the benchmark P25 TiO2 toward photodegradations for typical persistent organic pollutants of phenol, dye molecule of rhodamine B, antibiotic of tetracycline, pharmaceutical wastewater of ofloxacin, and pesticide of N,N-dimethylformamide, when evaluated in total organic carbon removal.

Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

Photodegradation kinetics and halogens release of the emerging concern pollutants dexamethasone and S-metolachlor on TiO2/rGO composites

This work studies the photocatalytic degradation of solutions containing 0.11 mM of a glucocorticoid (dexamethasone, DEX) and 0.11 mM of an herbicide (S-metolachlor, MTLC), organohalogenated compounds containing fluorine and chlorine atoms in their molecules, respectively. To treat 1 L volume, a mass of 0.5 g of TiO2/rGO composite in suspension has been used as photocatalyst, irradiated with UV-A LEDs with 200 W m-2 of irradiance. MTLC is partially adsorbed on the surface of the catalyst, while DEX is not adsorbed, showing different degradation kinetics. The halogen ions released into the solution from the breakage of the parent molecules, F- and Cl- respectively, were analysed. In the case of MTLC, the released Cl- followed two different kinetic trends, being faster, and with a rate that matched the rate of MTLC disappearance, the part corresponding to non-adsorbed MTLC. In the experiments with DEX solutions a different behaviour was observed; the released F- in the photocatalytic degradation was partially adsorbed on the catalyst surface, but the adsorption capacity decreased with the use of the photocatalyst in consecutive cycles until the solubilised F- matched the degraded concentration of DEX. Furthermore, the mass balance between the degraded contaminant and the solubilised halogen anion, for both contaminants, allowed to conclude the absence of halogenated intermediates under the final operating conditions, that is a remarkable outcome in water remediation processes.

Cyanide Removal by ZnTiO3/TiO2/H2O2/UVB System: A Theoretical-Experimental Approach

Cyanide is a highly toxic substance present in wastewater from various industries. This study investigates the removal of cyanide species (CS) from aqueous solutions using the ZnTiO3/TiO2/H2O2/UVB system. ZnTiO3/TiO2 nanoparticles synthesized by the sol-gel method were characterized by powder X-ray diffractometry (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The adsorption capacity of nanoparticles was tested by varying the pH of the solution, adsorbent concentration, and contact time. The adsorption of CS on ZnTiO3 and TiO2 surfaces was verified by Density Functional Theory (DFT) calculations. Photocatalytic experiments were achieved under UVB irradiation (λ = 310 nm). The response surface methodology (RSM) was used to optimize the CS removal efficiency. The detoxification effect was evaluated by acute toxicity tests with brine shrimp. The theoretical results show that the adsorption of CS is energetically more favorable on the ZnTiO3 surface than on the TiO2 surface. The experimental results show that the system consisting of ZnTiO3/TiO2 (200 mg L-1), H2O2 (0.1%), and UVB light removes 99% of CS from aqueous solutions after 60 min and reduces the mortality of nauplii in 90% after 90 min. This system was reused in five consecutive cycles with a total loss of efficiency of 30%.

Construction of type-II scheme SnO@HfC photocatalyst for bisphenol A degradation via peroxymonosulfate activation; DFT and self-cleaning analysis

In this study, novel stannous oxide@hafnium carbide (SnO@HfC) nanocomposite was successfully manufactured by an appropriate hydrothermal scheme which was utilized for the photocatalytic degradation of BPA by stimulation of peroxymonosulfate (PMS) and self-cleaning application. Numerous methods were applied for the characterization of photocatalyst and demonstrated the successful preparation of SnO@HfC nanocomposite. The crystal structures, band structures and density of states for SnO and HfC were explored by DFT analysis. The amazing PMS stimulation performance of SnO@HfC nanocomposite originated from the establishment of a heterojunction, which led to the enhancement of the light response aptitude and the electron conduction competence of the composite. BPA was degraded by 0.75 g/L PMS and SnO@HfC at neutral pH during the period of 60 min. In order to identify active groups in the reaction procedure, quenching experiments and electron paramagnetic resonance (EPR) approaches were also used. In the subsequent active species scavenging assays, where sulfate radicals, hydroxyl radicals, holes, and superoxide radicals were engaged in the degradation of BPA. While, liquid phase mass spectrometry (LC-MS) was used to pinpoint the intermediate metabolites in the course of degradation. SnO@HfC/PMS/light system delivered excellent TOC removal efficiency and less ions leaching. The SnO@HfC nanocomposite proved good durability and reusability in continuous cycle tests along with excellent self-cleaning function on the glass substrate. The SnO@HfC nanocomposite performs admirably in terms of self-cleaning application. The SnO@HfC nanocomposite is expected to be used in the future for the treatment of wastewater that contains pharmaceuticals due to its superior stability and reusability after five consecutive cycles.

Characterization and Comparison of WO3/WO3-MoO3 and TiO2/TiO2-ZnO Nanostructures for Photoelectrocatalytic Degradation of the Pesticide Imazalil

Tungsten oxide (WO3) and zinc oxide (ZnO) are n-type semiconductors with numerous applications in photocatalysis. The objective of this study was to synthesize and characterize different types of nanostructures (WO3, WO3-Mo, TiO2, and TiO2-ZnO) for a comparison of hybrid and pure nanostructures to use them as a photoanodes for photoelectrocatalytic degradation of emerging contaminants. With the aim of comparing the properties of both samples, field emission scanning electron microscopy (FE-SEM) and confocal laser-Raman spectroscopy were used to study the morphology, composition, and crystallinity, respectively. Electrochemical impedances, Mott-Schottky, and water splitting measurements were performed to compare the photoelectrochemical properties of photoanodes. Finally, the photoelectrocatalytic degradation of the pesticide Imazalil was carried out with the best optimized nanostructure (TiO2-ZnO).

Gamma Radiation Synthesis of Ag/P25 Nanocomposites for Efficient Photocatalytic Degradation of Organic Contaminant

Titanium dioxide (TiO₂) has garnered significant attention among various photocatalysts, whereas its photocatalytic activity is limited by its wide bandgap and inefficient charge separation, making the exploration of new strategies to improve its photocatalytic performance increasingly important. Here, we report the synthesis of Ag/P25 nanocomposites through a one-step gamma-ray radiation method using AgNO₃ and commercial TiO₂ (Degussa P25). The resulting products were characterized by powder X-ray diffraction, UV-Vis diffused reflectance spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The effect of free radical scavengers, feed ratios of Ag/P25, and dose rates on the photocatalytic activity of the Ag/P25 nanocomposites were systematically investigated using rhodamine B under Xenon light irradiation. The results showed that the Ag/P25 photocatalyst synthesized with a feed ratio of 2.5 wt% and isopropyl alcohol as the free radical scavenger at a dose rate of 130 Gy/min exhibited outstanding photocatalytic activity, with a reaction rate constant of 0.0674 min^-1, much higher than that of P25. Additionally, we found that the particle size of Ag could be effectively controlled by changing the dose rate, and the Ag/P25 nanocomposites doped with smaller size of Ag nanoparticles performed higher photocatalytic activities. The synthesis strategy presented in this study offers new insight into the future development of highly efficient photocatalysts using radiation techniques.

Green valorization of end-of-life toner powder to iron oxide-nanographene nanohybrid as a recyclable persulfate activator for degrading emerging micropollutants

The sustainable management of toner waste (T-raw) was performed via carbonization at 500 °C (T-500) and 600 °C (T-600) to produce iron oxide-nanographene nanohybrid (FeO-NG) for activating persulfate (PS) to efficiently degrade dyes (methylene blue, MB), antibiotics (sulfamethazine, SMZ), and pesticides (diazinon, DZN). Morphology, crystallinity, chemical structure, chemical composition, surface area, and pore size distribution of the synthesized materials were investigated using various analyses. High degradation ratios of MB were attained over a wide pH range (2-7), and the optimum operating conditions were determined. The FeO-NG/PS system was tested in different water matrices. MB degradation efficiency dropped from 80.13% to 78.56% after five succeeding experiments, proving the high stability of T-500. Trapping experiments proved the major role of sulfate radicals and the minor contribution of singlet oxygen. The toxicity evaluation of the treated and untreated MB solutions was conducted via measuring the cell viability, showing an increase in cell viability ratio after the degradation of MB. The degradation efficiencies of DZN and SMZ were 97.54% and 83.7%, respectively and the mineralization ratios were 74.08% and 60.37% at initial concentrations of sulfamethazine and diazinon of 50 and 100 mg/L, respectively. The high degradation efficiency of emerging micropollutants as well as the inexpensiveness, and facile synthesis of the catalyst boost the prospect of applying the proposed system on an industrial scale.

Efficient and recyclable Nd3+-doped CoFe2O4 for boosted visible light-driven photocatalytic degradation of Rhodamine B dye

Rare earth metal doping spinel ferrites offer excellent electronic, magnetic, and photocatalytic properties, but they have not been well explored for environmental mitigation. Herein, we report the facile fabrication of novel CoNd _x Fe_2-x O₄ (x = 0-0.05) photocatalysts based on Nd³⁺ incorporated into CoFe₂O₄ for the degradation of Rhodamine B under visible light irradiation. The Nd³⁺ dopant considerably increased the specific surface area (35 m² g^-1) and enhanced the degradation performance (94.7%) of CoNd _x Fe_2-x O₄ catalysts. Nd³⁺-doped CoFe₂O₄ played a role in the formation of radicals, including ˙OH, h⁺, and ˙O₂ ^-. With high recyclability and performance, CoNd_0.05Fe_1.95O₄ nanoparticles can be efficient and reusable photocatalysts for degrading organic dyes, including Rhodamine B from wastewaters.

Effect of Doping TiO2 NPs with Lanthanides (La, Ce and Eu) on the Adsorption and Photodegradation of Cyanide-A Comparative Study

Free cyanide is a highly dangerous compound for health and the environment, so treatment of cyanide-contaminated water is extremely important. In the present study, TiO₂, La/TiO₂, Ce/TiO₂, and Eu/TiO₂ nanoparticles were synthesized to assess their ability to remove free cyanide from aqueous solutions. Nanoparticles synthesized through the sol-gel method were characterized by X-ray powder diffractometry (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transformed infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS), and specific surface area (SSA). Langmuir and Freundlich isotherm models were utilized to fit the adsorption equilibrium experimental data, and pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were used to fit the adsorption kinetics experimental data. Cyanide photodegradation and the effect of reactive oxygen species (ROS) on the photocatalytic process were investigated under simulated solar light. Finally, reuse of the nanoparticles in five consecutive treatment cycles was determined. The results showed that La/TiO₂ has the highest percentage of cyanide removal (98%), followed by Ce/TiO₂ (92%), Eu/TiO₂ (90%), and TiO₂ (88%). From these results, it is suggested that La, Ce, and Eu dopants can improve the properties of TiO₂ as well as its ability to remove cyanide species from aqueous solutions.

Comparison of ZnO Nanoparticles Prepared by Precipitation and Combustion for UV and Sunlight-Driven Photocatalytic Degradation of Methylene Blue

ZnO nanoparticles (NPs) were comparatively synthesized via precipitation and combustion techniques. The ZnO NPs synthesized via precipitation and combustion exhibited similar polycrystalline hexagonal wurtzite structures. The large crystal sizes of ZnO NPs were obtained from the ZnO precipitation in comparison with those from the ZnO combustion, while the particle sizes were in the same range. The functional analysis implied that the ZnO structures had surface defects. Moreover, absorbance measurement showed the same absorbance range in ultraviolet light. In the photocatalytic degradation of methylene blue, ZnO precipitation exhibited higher degradation performance than ZnO combustion. This was attributed to the larger crystal sizes of ZnO NPs, which provided an enduring carrier movement at semiconductor surfaces and reduced electron-hole recombination. Thus, the crystallinity of ZnO NPs can be considered an important factor in photocatalytic activity. Furthermore, precipitation is an interesting synthesizing method for preparing ZnO NPs with large crystal sizes.

Morphological Control of Supported ZnO Nanosheet Arrays and Their Application in Photodegradation of Organic Pollutants

Supported nanostructured photocatalysis is considered to be a sustainable and promising method for water pollution photodegradation applications due to its fascinating features, including a high surface area, stability against aggregation, and easy handling and recovery. However, the preparation and morphological control of the supported nanostructured photocatalyst remains a challenge. Herein, a one-step hydrothermal method is proposed to fabricate the supported vertically aligned ZnO nanosheet arrays based on aluminum foil. The morphologically controlled growth of the supported ZnO nanosheet arrays on a large scale was achieved, and the effects of hydrothermal temperature on morphologic, structural, optical, and photocatalytic properties were observed. The results reveal that the surface area and thickness of the nanosheet increase simultaneously with the increase in the hydrothermal temperature. The increase in the surface area enhances the photocatalytic activity by providing more active sites, while the increase in the thickness reduces the charge transfer and thus decreases the photocatalytic activity. The influence competition between the area increasing and thickness increasing of the ZnO nanosheet results in the nonlinear dependence between photocatalytic activity and hydrothermal temperature. By optimizing the hydrothermal growth temperature, as fabricated and supported ZnO nanosheet arrays grown at 110 °C have struck a balance between the increase in surface area and thickness, it exhibits efficient photodegradation, facile fabrication, high recyclability, and improved durability. The RhB photodegradation efficiency of optimized and grown ZnO nanosheet arrays increased by more than four times that of the unoptimized structure. With 10 cm² of as-fabricated ZnO nanosheet arrays, the degradation ratio of 10 mg/L MO, MB, OFL, and NOR was 85%, 51%, 58%, and 71% under UV irradiation (365 nm, 20 mW/cm²) for 60 min. All the target pollutant solutions were almost completely degraded under UV irradiation for 180 min. This work offers a facile way for the fabrication and morphological control of the supported nanostructured photocatalyst with excellent photodegradation properties and has significant implications in the practical application of the supported nanostructured photocatalyst for water pollution photodegradation.

Enhanced Photocatalytic Degradation of Methylene Blue Using Ti-Doped ZnO Nanoparticles Synthesized by Rapid Combustion

ZnO and Ti-doped ZnO (Ti-ZnO) nanoparticles were synthesized using rapid combustion. The morphology of ZnO and Ti-ZnO featured nanoparticles within cluster-like structures. The ZnO and Ti-ZnO structures exhibited similar hexagonal wurtzite structures and crystal sizes. This behavior occurred because Zn²⁺ sites of the ZnO lattice were substituted by Ti⁴⁺ ions. The chemical structure characterization implied the major vibration of the ZnO structure. The physisorption analysis showed similar mesoporous and non-rigid aggregation structures for ZnO and Ti-ZnO using N₂ adsorption-desorption. However, Ti-ZnO demonstrated a specific surface area two times higher than that of ZnO. This was a major factor in improving the photocatalytic degradation of methylene blue (MB). The photocatalytic degradation analysis showed a kinetic degradation rate constant of 2.54 × 10^-3 min^-1 for Ti-ZnO, which was almost 80% higher than that of ZnO (1.40 × 10^-3 min^-1). The transformation mechanism of MB molecules into other products, including carbon dioxide, aldehyde, and sulfate ions, was also examined.

Degradation of Methylparaben Using Optimal WO3 Nanostructures: Influence of the Annealing Conditions and Complexing Agent

In this work, WO₃ nanostructures were synthesized with different complexing agents (0.05 M H₂O₂ and 0.1 M citric acid) and annealing conditions (400 °C, 500 °C and 600 °C) to obtain optimal WO₃ nanostructures to use them as a photoanode in the photoelectrochemical (PEC) degradation of an endocrine disruptor chemical. These nanostructures were studied morphologically by a field emission scanning electron microscope. X-ray photoelectron spectroscopy was performed to provide information of the electronic states of the nanostructures. The crystallinity of the samples was observed by a confocal Raman laser microscope and X-ray diffraction. Furthermore, photoelectrochemical measurements (photostability, photoelectrochemical impedance spectroscopy, Mott-Schottky and water-splitting test) were also performed using a solar simulator with AM 1.5 conditions at 100 mW·cm^-2. Once the optimal nanostructure was obtained (citric acid 0.01 M at an annealing temperature of 600 °C), the PEC degradation of methylparaben (C_O 10 ppm) was carried out. It was followed by ultra-high-performance liquid chromatography and mass spectrometry, which allowed to obtain the concentration of the contaminant during degradation and the identification of degradation intermediates. The optimized nanostructure was proved to be an efficient photocatalyst since the degradation of methylparaben was performed in less than 4 h and the kinetic coefficient of degradation was 0.02 min^-1.

Enhance ZnO Photocatalytic Performance via Radiation Modified g-C3N4

Environmental pollution, especially water pollution, is becoming increasingly serious. Organic dyes are one type of the harmful pollutants that pollute groundwater and destroy ecosystems. In this work, a series of graphitic carbon nitride (g-C3N4)/ZnO photocatalysts were facilely synthesized through a grinding method using ZnO nanoparticles and g-C3N4 as the starting materials. According to the results, the photocatalytic performance of 10 wt.% CN-200/Z-500 (CN-200, which g-C3N4 was 200 kGy, referred to the irradiation metering. Z-500, which ZnO was 500 °C, referred to the calcination temperature) with the CN-200 exposed to electron beam radiation was better than those of either Z-500 or CN-200 alone. This material displayed a 98.9% degradation rate of MB (20 mg/L) in 120 min. The improvement of the photocatalytic performance of the 10 wt.% CN-200/Z-500 composite material was caused by the improvement of the separation efficiency of photoinduced electron-hole pairs, which was, in turn, due to the formation of heterojunctions between CN-200 and Z-500 interfaces. Thus, this study proposes the application of electron-beam irradiation technology for the modification of photocatalytic materials and the improvement of photocatalytic performance.