Enhanced degradation of nonylphenol at neutral pH by ultrasonic assisted- heterogeneous Fenton using nano zero valent metals

Effective treatment of 2,4,6-trinitrotoluene from aqueous media using a sono-photo-Fenton-like process with a zero-valent iron nanoparticle (nZVI) catalyst

In this study, we examine the effectiveness of using a combination of a sono-photo-Fenton-like procedure and nano zero-valent iron catalyst (nZVI) to treat 2,4,6-trinitrotoluene (TNT) in an aquatic environment. Zero-valent iron particles were generated by a chemical reduction technique. nZVI nanoparticles were analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD) to characterize the nanocatalyst. The resulting nZVI nanoparticles were used as an addition in a sono-photo-Fenton method to remediate an aqueous solution contaminated with TNT. Furthermore, influences of operational factors such as temperature, catalyst dosage, wavelength, ultraviolet power, ultrasonic frequency and power, pH level, H2O2/nZVI ratio, initial TNT concentration, and reaction duration on the treatment of TNT were investigated. Under the conditions of an ideal pH of 3, temperature range of 40-45 °C, concentration of 50 mg per L TNT, dose of 2 mM of nZVI, and ratio of H2O2/Fe0 of 20, a treatment efficiency of 95.2% was achieved after a duration of 30 minutes. The sono-photo-Fenton process combined with nZVI showed a higher TNT removal efficiency compared to the Fenton, sono-Fenton, and photo-Fenton processes under the same conditions. Moreover, it promises a potential solution to treat TNT at the pilot scale while allowing reuse of the nZVI catalyst and the limitation of sludge.

A review of copper-based Fenton reactions for the removal of organic pollutants from wastewater over the last decade: different reaction systems

In recent years, as global industrialization has intensified, environmental pollution has become an increasingly serious problem. Improving water quality and achieving wastewater purification remain top priorities for environmental health initiatives. The Fenton process is favored by researchers due to its high efficiency and ease of operation. Central to the Fenton process is a catalyst used to activate hydrogen peroxide, rapidly degrading pollutants, improving water quality. Among various catalysts developed, copper-based catalysts have attracted considerable attention due to their affordability, high activity, and stable performance. Based on this, this paper reviews the development of copper-based Fenton systems over the past decade. It mainly involves the research and application of copper-based catalysts in different Fenton systems, including photo-Fenton, electro-Fenton, microwave-Fenton, and ultrasonic-Fenton. This review provides a fundamental reference for the subsequent studies of copper-based Fenton systems, contributing to the goal of transitioning these systems from laboratory research into practical environmental applications.

Recent advances in ultrasound-Fenton/Fenton-like technology for degradation of aqueous organic pollutants

Organic pollutants in water are a serious problem because of their widespread presence, harming the ecosystem and human health. Of the commonly used advanced oxidation processes, a hybrid of ultrasound and the Fenton/Fenton-like technology has received increasing attention in treatment of aqueous organic pollutants. This hybrid is effective in degradation of organic pollutants, but its application has not been summarised. Herein, first, the application and influencing factors of this hybrid technology for organic pollutants degradation are introduced. Second, the mechanism of its action is discussed. Third, the current challenges and future perspectives associated with this technology are proposed. This review provides valuable information regarding this technology, deepens the understanding of its mechanisms of organic pollutants degradation and provides a reference for its use in treatment of aquatic environments.

Recent advances in advanced oxidation processes (AOPs) for the treatment of nitro- and alkyl-phenolic compounds

The presence of phenolic compounds in the aquatic environment has posed severe risks due to their toxicity. Among the phenolic families, nitro- and alkyl-phenolic compounds have been categorized as precedence contaminants by the United States Environmental Protection Agency (US EPA). Therefore, efficient treatment methods for wastewater containing nitro- and alkyl-phenolic compounds are urgently needed. Due to the advantages of creating reactive species and generating efficient degradation of hazardous contaminants in wastewater, advanced oxidation processes (AOPs) are well-known in the field of treating toxic contaminants. In this review paper, the recent directions in AOPs, catalysts, mechanisms, and kinetics of AOPs are comprehensively reviewed. Furthermore, the conclusion summarizes the research findings, future prospects, and opportunities for this study. The main direction of AOPs lies on the optimization of catalyst and operating parameters, with industrial applications remain as the main challenge. This review article is expected to present a summary and in-depth understanding of AOPs development; and thus, inspiring scientists to accelerate the evolution of AOPs in industrial applications.

The mechanisms of learning and memory impairment caused by nonylphenol: a narrative review based on in vivo and in vitro studies

Learning and memory play a fundamental role on brain cognitive functions which are crucial for human life. Nonylphenol (NP), a serious environmental pollutant over the world, is proven to be harmful for learning and memory mainly via diet exposure. Currently, besides the administrative restrictions for the use of NP, there are rarely other effective approaches against learning and memory impairment caused by NP. This review summarized the mechanisms underlying NP-induced learning and memory impairment according to in vivo and in vitro experiments. Based on the studies involved in behavior tests, these mechanisms were classified as oxidative stress, neurotransmitter disorder, synaptic plasticity impairment, and neuron injury. In addition, according to the studies which did not conduct behavior tests, the possible mechanisms underlying NP-induced learning and memory impairment were proposed as chronic inflammation and gut permeability increment. Furthermore, this review also revealed the demanding questions for the mechanism investigations and therapeutic methods. Notably, the summarized mechanisms might accelerate the prevention and remediation of NP-induced learning and memory impairment.

Degradation of the endocrine-disrupting 4-nonylphenol by ferrate(VI): biodegradability and toxicity evaluation

4-Nonylphenol (4-NP) is an endocrine-disrupting and persistent chemical and is partially degraded in conventional wastewater treatment processes. Ferrate(VI) can be used as an environment-friendly oxidizing agent to mediate 4-NP degradation. Thus, this paper evaluates the biodegradability of 4-NP and its degradation products after the addition of ferrate(VI). The biodegradability was examined using NP labeled with ¹⁴C as a tracer and activated sludge microorganisms as an inoculum. The addition of ferrate(VI) to the 4-NP solution spiked with the tracer resulted in no remarkable decrease in the concentration of ¹⁴C, indicating incomplete mineralization of 4-NP and formation of degradation products. The degradation products from 4-NP with Fe(VI) were estimated based on mass spectra, which detected a unique peak at m/z 223 at low intensity. Four hydrogen atoms might have been added to 4-NP by degradation with Fe(VI). In addition, the effect of ferrate(VI) concentration on the estrogenic activity of 4-NP in an aqueous solution was investigated using a yeast bioassay. The results show that estrogenic activity was significantly decreased at a mass ratio of Fe(VI) to 4-NP greater than or equal to 2.5.

Pilot-scale evaluation of ozone as a polishing step for the removal of nonylphenol from tank truck cleaning wastewater

The presence of nonylphenol (NP) in the wastewater of the tank truck cleaning industry is a major concern because of its endocrine disruptive properties. In this paper, the use of ozone for degrading NP from tank truck cleaning wastewater was investigated by operating a pilot-scale biological wastewater treatment in combination with an ozonation unit. The impact of the added ozonation step on the removal of NP, soluble chemical oxygen demand (sCOD) and total organic carbon (TOC) was monitored over one year. sCOD and TOC removal were not significantly enhanced, but the NP peak concentrations in the effluent were significantly lower than those obtained after biological treatment only: a relatively low NP concentration was observed, even when peak loads were present in the influent of the pilot-scale biological wastewater treatment plant (influent_bio). Contrariwise, the effluent of the sole biological treatment follows the peak load trends of the influent_bio. During the ozonation period, the average NP concentration in the combined biological-ozone unit was 0.29 μg/L, compared to 1.89 μg/L for the effluent obtained after a sole biological treatment, resulting in an improved average removal efficiency of 32%.

Zn-CNTs-Cu catalytic in-situ generation of H2O2 for efficient catalytic wet peroxide oxidation of high-concentration 4-chlorophenol

4-chlorophenol (4-CP) with high concentration is difficult to degrade thoroughly by traditional treatment methods due to its high biotoxicity and refractory to bio-degradation. A novel catalytic wet peroxide oxidation (CWPO) system based on Zn-CNTs-Cu catalysts through the in-situ generation of H₂O₂ was constructed and investigated for the degradation of high-concentration 4-CP for the first time. Zn-CNTs-Cu composite was prepared by the infiltration melting-chemical replacement method. The operational factors effect, mechanism, and pathways of Zn-CNTs-Cu/O₂ system for high concentration of 4-CP degradation were systematically performed and discussed. At the optimal experimental conditions, the degradation efficiency of 4-CP through CWPO system with Zn-CNTs-Cu/O₂ achieved 100 %, which was 689 % higher than that of wet oxidation system with O₂ alone. According to the mainly in-situ generated H₂O₂, the strong oxidative OH radical and wet-oxidation effect of O₂, high concentration of 4-CP degraded into small molecular organic matter, even been mineralized into carbon dioxide and water in the Zn-CNTs-Cu/O₂ based CWPO system. Overall, Zn-CNTs-Cu/O₂ CWPO system can efficiently degrade high-concentration 4-CP through the in-situ generation of H₂O₂ without extra replenishment, and it provides a novel method and strategy to the efficient treatment of refractory chlorophenols wastewater.

Degradation of hydroxypropyl guar gum at wide pH range by a heterogeneous Fenton-like process using bentonite-supported Cu(0)

To seek for efficient Fenton-like oxidation processing for treatment of waste fracturing fluid containing hydroxypropyl guar gum (HPGG), in heterogeneous reaction, five bentonite-supported zero-valent metal catalysts were prepared by liquid-phase reduction. The results showed that the bentonite-supported zero-valent copper exhibited best catalytic performance, attributed to the high dispersion of active sites of zero-valent copper. The effects of the most relevant operating factors (H₂O₂ concentration, catalyst dosage, temperature and pH) were evaluated in detail. Moreover, the chemical oxygen demand removal rate of HPGG can achieve 76% when the reaction time was selected at 45 min under optimal experimental conditions. The stability evaluation showed that the catalytic performance was almost unaffected after the catalyst was recycled and used once more showing the good stability of the bentonite-supported zero-valent copper in the application process.

Recent advances in Cu-Fenton systems for the treatment of industrial wastewaters: Role of Cu complexes and Cu composites

Cu-based Fenton systems have been recognized as a promising suite of technologies for the treatment of industrial wastewaters due to their high catalytic oxidation capacity. Rapid progress regarding Cu Fenton systems has been made not only in fundamental mechanistic aspects of these systems but also with regard to applications over the past decade. Based on available literature, this review synthesizes the recent advances regarding both the understanding and applications of Cu-based Fenton processes for industrial wastewater treatment. Cu-based catalysts that are essential to the effectiveness of use of Cu Fenton reactions for oxidation of target species are mainly classified into two types: (i) Cu complexes with organic or inorganic ligands, and (ii) Cu composites with inorganic materials. Performance of the Cu-based catalysts for the removal of organic pollutants in industrial wastewaters are reviewed, with the key operating parameters illustrated. Furthermore, the roles of Cu complexes and composites in both homogeneous and heterogeneous Cu-Fenton systems are critically examined with particular focus on the mechanisms involved. Perspectives and future efforts needed for Cu-based Fenton systems using Cu complexes and composites for industrial wastewater treatment are presented.

Insights into nonylphenol degradation by UV-activated persulfate and persulfate/hydrogen peroxide systems in aqueous matrices: a comparative study

Nonylphenol ethoxylates are widely used industrial surfactants. Once released into environment compartments, these chemicals undergo degradation and generate more toxic short chain artificial compound nonylphenol (NP). The latter is a known endocrine disrupting compound and persistent micropollutant. In the present study, the performance of NP degradation in UV-induced PS, PS/Fe²⁺, PS/H₂O₂, and PS/H₂O₂/Fe²⁺ systems was examined. The effect of concentration of oxidant and activators on the efficiency of target compound decomposition was studied. The trials were conducted in ultrapure water and groundwater to assess the influence of matrix composition. The obtained results indicated that NP degradation by all the systems studied followed a pseudo-first-order kinetics. The application of UV-activated PS at lower concentrations of the oxidant improved NP oxidation in both water matrices. The addition of iron activator at a cost-effective concentration showed slight improvement in the studied PS-based systems. The application of UV-induced dual oxidant PS/H₂O₂ system demonstrated promising results in NP oxidation. In turn, the addition of Fe²⁺ to the UV/PS/H₂O₂ system accelerated the target compound oxidation at an optimized dose of iron activator. The radicals scavenging studies indicated that HO^• was the predominant radical in all UV-induced PS-based systems. The results of this research could provide significant information for the removal of NP from different water matrices by means of UV-induced persulfate-based oxidation processes.

Optimal conditions for olive mill wastewater treatment using ultrasound and advanced oxidation processes

The treatment of olive mill wastewater (OMW) in Jordan was investigated in this work using ultrasound oxidation (sonolysis) combined with other advanced oxidation processes such as ultraviolet radiation, hydrogen peroxide (H₂O₂) and titanium oxide (TiO₂) catalyst. The efficiency of the combined oxidation process was evaluated based on the changes in the chemical oxygen demand (COD). The results showed that 59% COD removal was achieved within 90 min in the ultrasound /UV/TiO₂ system. A more significant synergistic effect was observed on the COD removal efficiency when a combination of US/UV/TiO₂ (sonophotocatalytic) processes was used at low ultrasound frequency. The results were then compared with the COD values obtained when each of these processes was used individually. The effects of different operating conditions such as, ultrasound power, initial COD concentration, the concentration of TiO₂, frequency of ultrasound, and temperature on the OMW oxidation efficiency were studied and evaluated. The effect of adding a radical scavenger (sodium carbonate) on the OMW oxidation efficiency was investigated. The results showed that the sonophotocatalytic oxidation of OMW was affected by the initial COD, acoustic power, temperature and TiO₂ concentration. The sonophotocatalytic oxidation of OMW increased with increasing the ultrasound power, temperature and H₂O₂ concentration. Sonolysis at frequency of 40 kHz combined with photocatalysis was not observed to have a significant effect on the OMW oxidation compared to sonication at frequency of 20 kHz. It was also found that the OMW oxidation was suppressed by the presence of the radical scavenger. The COD removal efficiency increased slightly with the increase of TiO₂ concentration up to certain point due to the formation of oxidizing species. At ultrasound frequency of 20 kHz, considerable COD reduction of OMW was reported, indicating the effectiveness of the combined US/UV/TiO₂ process for the OMW treatment.

Application of Conducting Polymer Nanostructures to Electrochemical Biosensors

Over the past few decades, nanostructured conducting polymers have received great attention in several application fields, including biosensors, microelectronics, polymer batteries, actuators, energy conversion, and biological applications due to their excellent conductivity, stability, and ease of preparation. In the bioengineering application field, the conducting polymers were reported as excellent matrixes for the functionalization of various biological molecules and thus enhanced their performances as biosensors. In addition, combinations of metals or metal oxides nanostructures with conducting polymers result in enhancing the stability and sensitivity as the biosensing platform. Therefore, several methods have been reported for developing homogeneous metal/metal oxide nanostructures thin layer on the conducting polymer surfaces. This review will introduce the fabrications of different conducting polymers nanostructures and their composites with different shapes. We will exhibit the different techniques that can be used to develop conducting polymers nanostructures and to investigate their chemical, physical and topographical effects. Among the various biosensors, we will focus on conducting polymer-integrated electrochemical biosensors for monitoring important biological targets such as DNA, proteins, peptides, and other biological biomarkers, in addition to their applications as cell-based chips. Furthermore, the fabrication and applications of the molecularly imprinted polymer-based biosensors will be addressed in this review.

Study of Cu NPs reactivity for compounds with different chemical structures: Black reactive dye 5, picric acid and 2,4-D herbicide

In this study, the copper nanoparticles (Cu NPs) reactivity for degradation of the reactive dye black 5 (RP5), picric acid (PA) and 2,4-D herbicide was evaluated. The RP5 degradation occurred by oxidative via, through hydroxyl radicals generated in situ, with active participation of Cu(I) and H₂O₂. The use of catalase confirmed the hydrogen peroxide formation in situ. Reduction degradation via electron transfer was also possible. On the other hand, PA had low degradation efficiency (less than 20%) under any conditions studied (similar to those used for RP5). High degradation efficiency for 2,4-D was achieved by the association of the Cu NPs/H₂O₂. Thus, the behavioral model of Cu NPs has been proven. This behavioral difference of the chemical species to be degraded in relation to the behavior of the Cu NPs was studied, evaluating its redox behavior by voltammetric analyzes. This study aided in the understanding and selection of the chemical species that can be degraded by these NPs.

Bmim[OAc]-Cu2O/g-C3N4 as a multi-function catalyst for sonophotocatalytic degradation of methylene blue

In this study, ionic liquid, 1-butyl-3-methylimidazolium acetate (Bmim[OAc]) modified cuprous oxide immobilized over graphitic carbon nitride (Bmim[OAc]-Cu₂O/g-C₃N₄) as an efficient heterogeneous catalyst was successfully prepared by depositing Bmim[OAc]-Cu₂O over the surface of g-C₃N₄. The deposition of cuprous oxide over the surface of g-C₃N₄ leads to the formation of a heterojunction that promotes the charge separation. Cu₂O enhances the degradation capability owing to its dual function where it acts as a photocatalyst and Fenton like catalyst. Bmim[OAc] plays a vital role in trapping the photogenerated electrons, which in turn reduce the chances of electron-hole pairs recombination. Sonophotocatalytic degradation of methylene blue (MB) was investigated using the prepared Bmim[OAc]-Cu₂O/g-C₃N₄ at room temperature and pH = 7 in presence of ultraviolet (UV, 6 W, λ = 254 nm) and ultrasonic (US, 20 kHz) as a dual irradiation system and H₂O₂ as an oxidant. Only 30 min of dual irradiation was enough for Bmim[OAc]-Cu₂O/g-C₃N₄ (0.1 gL^-1) to achieve a complete degradation using 10 mM H₂O₂ at 25 °C and pH = 7. The value of band gap of tested catalyst plays a vital role in boosting the degradation capability of the sonophotocatalytic system through the generated reactive radicals especially the hydroxyl radicals and superoxide radicals, which play a major role in the system. The kinetics of the reaction was investigated and the activation energy was calculated from the slope of the Arrhenius plot and found to be 19.77 kJ/mol.

Environmental remediation processes by zero valence copper: reaction mechanisms

Recent studies have shown Cu(0) as a promising material for the removal of organic and inorganic pollutants. However, there is no review addressing the studies performed. This fact may be related to the toxicity of the particles and the copper released in solution that has not motivated researchers, which entails in a reduced number of publications. However, studies point out how to solve the problem of Cu deposition in support materials. In this work, a detailed review of Cu(0) applications was performed. The specific focus was the reaction mechanisms related to adsorption, oxidation, and reduction processes. Initially, the resources that allow the understanding of the reaction mechanism, such as characterization techniques and the experimental conditions for investigation of the species involved in the process, were presented. The studies were evaluated separately, showing the mechanisms involved only with the application of Cu(0) in pure and isolated form and in association with oxidizing or reductive agents, combined with irradiation sources and ultrasonic waves and in the form supported in polymer matrices. It was verified that by the proposed reaction mechanisms, the exclusive participation of Cu(0), being the removal process, explained only by the redox behavior of copper. Therefore, the review showed the need for future research regarding the redox behavior of the contaminants.

Three-dimensional macroporous graphene-wrapped zero-valent copper nanoparticles as efficient micro-electrolysis-promoted Fenton-like catalysts for metronidazole removal

Three-dimensional macroporous graphene-wrapped zero-valent copper nanoparticles (3D-GN@Cu⁰) were synthesized using a self-assembly process of liquid-phase reduction and characterized by field emission scanning electron microscopy, nitrogen adsorption/desorption isotherms, X-ray diffraction, Raman spectrum analysis, and X-ray photoelectron spectroscopy. The catalytic activity of 3D-GN@Cu⁰ was evaluated in view of the effects of various systems, the pH value, catalyst dosage, initial metronidazole concentration and temperature, and it showed a high efficiency for removing metronidazole with saturated dissolved oxygen (without adding extra H₂O₂) in a wide range of pH value from 3.2 to 9.8. Combined with the results of dissolved oxygen activation, determination of reactive oxidizing species, and X-ray photoelectron spectroscopy (XPS) analysis, the surface-bounded ·OH_ads formed by the reaction of the in situ generation H₂O₂ with 3D-GN@Cu⁰ was mainly responsible for the removal of metronidazole. The charge distribution and electrostatic potential (ESP) of 3D-GN@Cu⁰ further illustrated the distribution and transfer of electrons on the catalyst surface, which predicted a micro-electrolysis-promoted Fenton-like reaction mechanism.

Decomposition of 15 aromatic compounds in supercritical water oxidation

Supercritical water oxidation (SCWO) of 15 aromatic compounds, including bisphenol A (BPA), nonylphenol (NP) and octylphenol (OP), was investigated under temperature and reaction time ranged of 350-550 °C and 0.5-6 min, respectively, with 300% excess oxygen, resulted in the degradation rate constants of total organic carbon (k_TOC) were 0.130-0.392 min^-1. To further explore the relationship between TOC removal and molecular characteristics, density functional theory (DFT) method had been used to calculate the quantum descriptors of the 15 aromatic compounds. The result of correlation analysis showed that the most positive partial charge on the H atom, namely q(H)_x, played a significant role in TOC removal, which implied the more q(H)_x value was, the easier H atom could lose, resulted in higher k_TOC constant. Different substituent groups in the phenyl ring could lead to different TOC removal efficiencies. It presented that the more F(0) value was, the more easily to be attacked by radicals, as a result, the k_TOC followed the order that benzenesulfonic acid (BSA) > phenol > methylbenzene (MB) > 3-phenylpropionic acid (3-PPA), as well as BPA < OP < NP.

Highly efficient degradation of berberine chloride form wastewater by a novel three-dimensional electrode photoelectrocatalytic system

Fe₂O₃/graphite (Fe₂O₃/C) and nano-TiO₂-coated glass bead were prepared by impregnation and sol-gel method respectively and employed as the catalyst of a novel three-dimensional electrode photoelectrocatalytic (3-D PEC) system. The photoexcited electrons can transfer from TiO₂, Fe₂O₃ to counter electrode. It improves the migration of photoexcited charges, retards the fast recombination of electron-hole, and increases the lifetime of photogenerated holes (h⁺). In addition, the cycle reaction of Fe³⁺/Fe²⁺ on Fe₂O₃/C surface enhanced the Fenton reaction which can produce more hydroxyl radicals (·OH) and promote the capacity of mineralization of the pollutants. This novel 3-D PEC system showed excellent performance for the degradation of berberine chloride form (BCF). At the pH value of 3, 93% BCF was removed within 60 min; besides, 98.64% COD removal rate, 78.96% mineralization, 21.47% mineralization current efficiency, and just 3.16 kW h g^-1TOC energy cost were obtained in 120 min. In this study, we proposed the 3-D PEC mechanism. Electron spin resonance (ESR) and scavenging experiments suggest that the major reactive oxygen species (ROS) are superoxide radicals (O₂^·-), ·OH, and h⁺, while the role of sulfate radical (SO₄^·-) is insignificant. This work provides a new dimension for the design of reactors for wastewater treatment and the construction of the 3-D PEC system can potentially be utilized in water purification.

Influence of precursor pH on the structure and photo-Fenton performance of Fe/hydrochar

Fe/hydrochar exhibited high visible light photo-Fenton activity because hydrochar accelerated the Fe³⁺/Fe²⁺ cycle at the catalyst/water interface.