Hydrothermal synthesis of FeS2 as a highly efficient heterogeneous electro-Fenton catalyst to degrade diclofenac via molecular oxygen effects for Fe(II)/Fe(III) cycle

Low-toxicity natural pyrite on electro-Fenton catalytic reaction in a wide pH range

The resource utilization of natural pyrite not only reduces secondary pollution but also brings certain environmental benefits. However, the green and efficient use of pyrite presents certain challenges. In this study, a novel electro-Fenton (EF) system was constructed utilizing copper modified graphite felt (GF/Cu) as cathode and natural pyrite (com-FeS2) as catalyst. The results demonstrated that the system exhibited a remarkable stability over an extensive pH range (3.0-10.0) and remained effective even under adverse environmental conditions, such as high salinity or elevated antibiotic concentration. After optimizing the reaction conditions, 0.2 mM sulfamerazine (SMZ) was almost completely degraded within 1.5 h. The results highlighted the catalytic role of Fe(II) on the com-FeS2 surface. Combined with quenching experiments and quantitative analysis of reactive oxygen species (ROS), the removal of SMZ was primarily attributed to the generation of •OH, ordered by 1O2 > •O2- > •OHads, a possible degradation pathway was proposed by HR-LC-MS. The biological toxicity after the reaction was detected, and the introduction of polyvinylpyrrolidone (PVP) was beneficial to reduce the biological toxicity of iron dissolution. This work provides new insights into the green and efficient resource utilization of natural pyrite and significantly expands the pH applicability range of the Fenton process, demonstrating the large-scale industrial application potential of pyrite.

Production of pyrite-based catalysts supported on graphene oxide and zinc oxide to treat drug mixture via advanced oxidation processes

Advanced oxidation processes (AOP) stood out as an efficient alternative for the treatment of organic contaminants. In this work, there were proposed syntheses of mixed catalysts of pyrite and graphene oxide and pyrite and zinc oxide to treat a mixture of the drugs atenolol and propranolol in aqueous solution through the photo-Fenton process with ultraviolet radiation. The efficiency of the methodologies used in the syntheses was confirmed through different characterization analyses. It was verified that the pyrite and zinc oxide catalyst led to the best contaminant degradation percentages with values equal to 88 and 84% for the groups monitored at the wavelengths (λ) of 217 and 281 nm. The degradation kinetics presented a good fit to the kinetic model proposed by Chan and Chu (2003) with R2 equal to 0.99, indicating a pseudo-first-order degradation profile. Finally, toxicity tests were carried out with two types of seeds, watercress and cabbage, for the solution before and after treatment. The cabbage seeds showed a reduction in germination percentages for the samples after treatments, while no toxicity was observed for watercress ones. This highlights the importance of evaluating the implications caused by products in relation to different organisms representing the biota.

Optimized preparation of Ni-Febm bimetallic particles by ball milling NiSO4 and iron powder for efficient removal of triclosan

The excessive usage and emissions of triclosan (TCS) pose a serious threat to aquatic environments. Iron-based bimetallic particles (Pd/Fe, Ni/Fe, and Cu/Fe, etc.) were widely used for the degradation of chlorophenol pollutants. This study proposed a novel synthesis method for the preparation of Ni/Fe bimetallic particles (Ni-Febm) by ball milling microscale zero valent iron ZVI (mZVI) and NiSO4. Ball-milling conditions such as ball-milling time, ball-milling speed and ball-to-powder ratio were optimized to prepare high activity Ni-Febm bimetallic particles. During the ball-milling process, Ni2+ was reduced to Ni0 and formed a coupled structure with ZVI. The amount of Ni0 on ZVI significantly affected the activity of Ni-Febm bimetallic particles. The highest activity Ni-Febm bimetallic particles with Ni/Fe ratio of 0.03 were synthesized under optimized conditions, which could remove 86.56% of TCS (10 μM) in aerobic aqueous solution within 60 min. In addition, higher particle dosage, lower pH condition and higher reaction temperature were more conducive for TCS degradation. The higher corrosion current and lower electron transfer impedance of Ni-Febm bimetallic particles were the main reasons for its high activity. The hydrogen atom (•H) on the surface of Ni-Febm bimetallic particles was mainly contributed to the removal of TCS, as reductive transformation products of TCS were detected by LC-TOF-MS. Notably, a small amount of oxidation products were discovered. The total dechlorination rate of TCS was calculated to be 39.67%. After eight reaction cycles, the residual Ni-Febm bimetallic particles could still degrade 28.34% of TCS within 6 h. Low Ni2+ leaching during reaction indicated that Ni-Febm bimetallic particles did not pose potential environmental risks. The prepared environmental-friendly Ni-Febm bimetallic particles with high activity have great potential in the degradation of other chlorinated organic compounds in wastewater.

Optimized design of quaternary amino-functionalized chitosan fibers for ultra-high diclofenac adsorption from wastewater

The extraction of non-steroidal anti-inflammatory drugs (NSAIDs) from water bodies is imperative due to the potential harm to humans and the ecosystem caused by NSAID-contaminated water. Quaternary amino-functionalized epichlorohydrin cross-linked chitosan fibers (QECFs), an economical and eco-friendly adsorbent, were successfully prepared using a simple and gentle method for efficient diclofenac (DCF) adsorption. Additionally, the optimized factors for the preparation of QECFs included epichlorohydrin concentration, pH, temperature, and (3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHTAC) concentration. QECFs demonstrated excellent adsorption performance for DCF across a broad pH range of 7-12. The calculated maximum adsorption capacity and the amount of adsorbed DCF per adsorption site were determined to be 987.5 ± 20.1 mg/g and 1.2 ± 0.2, respectively, according to the D-R and Hill isotherm models, at pH 7 within 180 min. This performance surpassed that of previously reported adsorbents. The regeneration of QECFs could be achieved using a 0.5 mol/L NaOH solution within 90 min, with QECFs retaining their original fiber form and experiencing only a 9.18% reduction in adsorption capacity after 5 cycles. The Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy were used to study the characterization of QECFs, the preparation mechanism of QECFs, and the adsorption mechanism of DCF by QECFs. Quaternary ammonium groups (R4N+) were well developed in QECFs through the reaction between amino/hydroxyl groups on chitosan and CHTAC, and approximately 0.98 CHTAC molecule with 0.98 R4N+ group were immobilized on each chitosan monomer. Additionally, these R4N+ on QECFs played a crucial role in the removal of DCF.

Reduced sulfur accelerates Fe(III)/Fe(II) recycling in FeS2 surface for enhanced electro-Fenton reaction

FeS2 is well-known for its role in redox reactions. However, the mechanism within heterogeneous electron-Fenton (Hetero-EF) systems remains unclear. In this study, a novel FeS2 based three-dimensional system (GF/Cu-FeS2) with self-generation of H2O2 was investigated for Hetero-EF degradation of sulfamethazine (SMZ). The results revealed that SMZ could be completely removed in 1.5 h, accompanying with the mineralization efficiency of 96% within 4 h. This system performed excellent stability, evidenced by consistently eliminated 100% of SMZ within 2 h over 4 cycles. The generated Reactive Oxygen Species (ROS) of •OH and •O2- in every degradation cycle were quantitatively measured to confirm the stability of the GF/Cu-FeS2 system. Additionally, the redox reaction mechanism on the surface of FeS2 was thoroughly analyzed in detail. The accelerated reduction of Fe(III) to Fe(II), triggered by S22- on the surface of FeS2, promoted the iron cycling, thereby quickening the Fenton process. Density Functional Theory (DFT) results illustrated the process of S22- to be oxidized to in detail. Therefore, this work provides deeper insight into the mechanistic role of S22- in FeS2 for environmental remediation.

H2O2 activation and contaminants removal in heterogeneous Fenton-like systems

Emerging contaminants can be removed effectively in heterogeneous Fenton-like systems. Currently, catalyst activity and contaminant removal mechanisms have been studied extensively in Fenton-like systems. However, a systematic summary was lacking. This review summarized: 1) The effects of various heterogeneous catalysts on emerging contaminants degradation by activating H₂O₂; 2) The role of active sites in different catalysts during the activation of H₂O₂ and their contribution to the generation of active species; 3) The modulation of degradation pathways of emerging contaminants. This paper will help scholars to advance the controlled construction of active sites in heterogeneous Fenton-like systems. Suitable heterogeneous Fenton catalysts can be selected in practical water treatment processes.

Minerals as catalysts of heterogeneous Electro-Fenton and derived processes for wastewater treatment: a review

Advanced oxidation processes (AOPs) such as Fenton's reagent, which generates highly reactive oxygen species, are efficient in removing biorefractory organic pollutants from wastewater. However, Fenton's reagent has drawbacks such as the generation of iron sludge, high consumption of H₂O₂, and the need for pH control. To address these issues, Electro-Fenton (EF) and heterogeneous Electro-Fenton (HEF) have been developed. HEF, which uses solid catalysts, has gained increasing attention, and this review focuses on the use of mineral catalysts in HEF and derived processes. The reviewed studies highlight the advantages of using mineral catalysts, such as efficiency, stability, affordability, and environmental friendliness. However, obstacles to overcome include the agglomeration of unsupported nanoparticles and the complex preparation techniques and poor stability of some catalyst-containing cathodes. The review also discusses the optimal pH range and dosage of the heterogeneous catalysts and compares the performance of iron sulfides versus iron oxides. Although natural minerals appear to be the best choice for effluents at pH>4, no scale-up reports have been found. The need for further development in this field and the importance of considering the environmental impact of trace toxic metals or catalytic nanoparticles in the treated water on the receiving ecosystem is emphasized. Finally, the article acknowledges the high energy consumption of HEF processes at the lab scale and calls for their performance development to achieve environmentally friendly and cost-effective results using real wastewaters on a pilot scale.

Enhanced photo-Fenton activity and stability for sulfamethoxazole degradation by FeS2@TiO2 heterojunction derived from MIL-125

FT-x composites with core-shell structure (FT = FeS₂@TiO₂, x represents the mass ratio of the used FeCl₃·6H₂O to MIL-125) were fabricated by a hydrothermal method using MIL-125(Ti) as a self-sacrificing template. Both the photo-Fenton activity and stability of the FT-1 were improved greatly in comparison with its counterparts due to the unique core-shell structure and synergistic effect between FeS₂ and TiO₂. Especially, the Fe leaching concentration of FT-1 was approximately 1/10 of the individual FeS₂, benefiting from the protection effect of TiO₂ shell. Under dark condition, the formed FeOOH occupied active sites and inhibited iron cycle as well as H₂O₂ decomposition, leading to the inactivation of FT-1. UV light irradiation not only boosted the catalytic activity but also prevented the FT-1 from reactivity decline owning to the regeneration of Fe²⁺ by photogenerated electrons and continuous generation of ·OH. Experimental and DFT calculation results indicated that a type-II heterojunction was formed, in which photogenerated electrons were transferred from FeS₂ core to TiO₂ shell, accelerating charge separation and further boosting sulfamethoxazole (SMX) degradation. FT-1 displayed outstanding photo-Fenton activity in wide pH ranged from 2 to 6 and good anti-interfering ability toward impurities in water matrix. Besides, the reusability of FT-1 was good, in which 90% SMX degradation was maintained even after 5 runs. Noteworthy, the photo-Fenton activity was recovered via a revulcanization process, in which FeOOH was completely transformed into FeS₂. This founding provided insights for the design and construction of heterojunction with both excellent photo-Fenton activity and stability.

Natural iron minerals in an electrocatalytic oxidation system and in situ pollutant removal in groundwater: Applications, mechanisms, and challenges

Natural iron-bearing minerals are widely distributed in the environment and show prominent catalytic performance in pollutant removal. This work provides an overview of groundwater restoration technologies utilizing heterogeneous electro-Fenton (HEF) techniques with the aid of different iron forms as catalysts. In particular, applications of natural iron-bearing minerals in groundwater in the HEF system have been thoroughly summarized from either the view of organic pollutant removal or degradation. Based on the analysis of the catalytic mechanism in the HEF process by pyrite (FeS₂), goethite (α-FeOOH), and magnetite (Fe₃O₄) and the geochemistry analysis of these natural iron-bearing minerals in groundwater, the feasibility and challenges of HEF for organic degradation by using typical iron minerals in groundwater have been discussed, and natural factors affecting the HEF process have been analyzed so that appropriate in situ remedial measures can be applied to contaminated groundwater.

Original nanostructured bacterial cellulose/pyrite composite: Photocatalytic application in advanced oxidation processes

The development of an original catalytic composite of bacterial cellulose (BC) and pyrite (FeS₂) for environmental application was the objective of this study. Nanoparticles of the FeS₂ were synthesized from the hydrothermal method and immobilized on the BC structure using ex situ methodology. In the BC, the FTIR and XRD analyzes showed the absorption band associated with the Fe-S bond and crystalline peaks attributed to the pyrite. Thus, the immobilization of the iron particles on the biopolymer was proven, producing the composite BC/FeS₂. The use of the SEM technique also ratifies the composite production by identifying the fibrillar structure morphology of the cellulose covered by FeS₂ particles. The total iron concentration was 54.76 ± 1.69 mg L^-1, determined by flame atomic absorption analysis. TG analysis and degradation tests showed respectively the thermal stability of the new material and its high catalytic potential. A multi-component solution of textile dyes was used as the matrix to be treated via advanced oxidative processes. The composite acted as the catalyst for the Fenton and photo-Fenton processes, with degradations of 52.87 and 96.82%, respectively. The material proved stability by showing low iron leaching (2.02 ± 0.09 and 2.11 ± 0.11 mg L^-1 for the respective processes). Thus, its high potential for reuse is presumed, given the remaining concentration of this metal in the BC. The results showed that the BC/FeS₂ composite is suitable to solve the problems associated with using catalysts in suspension form.

N-doped graphene aerogel cathode with internal aeration for enhanced degradation of p-nitrophenol by electro-Fenton process

A columnar N-doped graphene aerogel (NGA) was successfully fabricated by one-step hydrothermal synthesis using L-hydroxyproline as reductant, N-doping, and swelling agent, and it was used as the cathode with internal aeration mode for the electro-Fenton degradation of p-nitrophenol. Owing to the stable solid-liquid-gas three-phase interface, more active defects, and modulated nitrogen dopants, the NGA cathode exhibited enhanced electrocatalytic activity. H₂O₂ could be continuously electro-generated via a two-electron oxygen reduction, and the yield of H₂O₂ was 153.3 mg·L^-1·h^-1 with the low electric energy consumption of 15.3 kWh kg^-1. Simultaneously, the NGA cathode had better charge transfer capability with N-doping, which was conducive to the conversion of Fe³⁺/Fe²⁺. Under the optimal condition, nearly 100% removal of p-nitrophenol and 84% removal of TOC were obtained within 60 and 120 min, respectively. The NGA cathode also presented good stability and versatile applicability in different water matrices. Therefore, the NGA is a cost-effective cathode material in electro-Fenton system with adequate activity and reuse stabilization.

CeO2 modified carbon nanotube electrified membrane for the removal of antibiotics

Electrified carbon nanotube membranes (ECM) are used as electroactive porous materials for the degradation of micropollutants. It integrated design of both electrochemical processes and filtration functions. In this study, CeO₂ modified carbon nanotube electrified membrane (CeO₂@CNT membrane) was prepared and activate NaClO towards degradation of antibiotics. As CeO₂ with face-centered cubic (Fcc) fluorite structure was loaded onto the CNT sidewalls, the CeO₂@CNT membrane showed a higher over potential and a smaller equivalent polarization resistance compared to ECM. More reactive oxygen species (ROS) and reactive chlorine species (RCS) were generated by CeO₂@CNT membrane due to faster electron transfer at the solid-liquid interface. Thus, the removal efficiencies of DCF, SMX, CIP, TC and CBZ were more than 91.2%, 91.3%, 94.4%, 99.3% and 89.4% by the CeO₂@CNT membrane with NaClO, respetively. And the apparent reaction rate constant (k) of the CeO₂@CNT membrane was 2.9 times of that of ECM. The selective capping experiments and density functional theory (DFT) calculation showed that the oxygen vacancies of CeO₂ contributed to the generation of ‧OH, and the generation of ClO‧ and ‧O₂^- would mainly occur on Lewis acid sites of CeO₂. In addition, the CeO₂@CNT membrane showed a reasonable stability to treat actual water samples and reduced disinfection byproducts (DBPs) formation, suggesting that it can potentially be combined with the conventional chlorine disinfection to degrade antibiotics in water.

Surface-catalyzed electro-Fenton with flexible nanocatalyst for removal of plasticizers from secondary wastewater effluent

Activation of H₂O₂ with metal-free catalysts is an efficient and environmentally benign alternative to electron-Fenton (EF) for organics degradation. In the present study, flexible nanocatalysts were synthesized with self-regulated metal oxide nanoparticles (FeOx NPs) for efficient removal of plasticizers from secondary wastewater effluent (SWE). Compared with NGr/EF and FeOx@Gr/EF systems, FeOx@NGr/EF could enhance the decay kinetics of plasticizers by 3.9-4.4 times and reduce 48-59% of the disposal cost. Reactive oxygen species tests and trapping experiments proved that the surface-catalyzed EF effectively broadened the range of solution pH. Density functional theory calculations coupled with electrochemical measurements indicated that the electron transfer rates between Fe-O-C atoms were enhanced with N-doping due to strong interactions between N-Fe bond. The synergistic effects of FeOx and N could improve the oxygen reduction activity for H₂O₂ generation, and accelerate electron transfer between FeOx/NGr and H₂O₂ for ^•OH generation, offering an alternative for wastewater treatment.

Fe3O4/Mn3O4/ZnO-rGO hybrid quaternary nano-catalyst for effective treatment of tannery wastewater with the heterogeneous electro-Fenton process: Process optimization

This study investigated chemical oxygen demand (COD) removal from tannery wastewater (TWW) with a novel Fe₃O₄/Mn₃O₄/ZnO-rGO heterogeneous electro Fenton (HEF) hybrid magnetically-separable nano-catalyst. The graphite cathode and Ti/IrO₂/RuO₂ anode were used in the HEF process. With aeration (2 L/min), in-situ H₂O₂ generation occurred. The nano-catalyst was characterized by XRD, XPS, DLS, FT-IR, ζ potential, SEM, TEM, and BET techniques in detail. The system was modelled with a central composite design and optimized numerically. The established model was adequate, valid, reliable, and reproducible to predict the COD removal efficiency. OH and O₂^- were the oxidative species responsible for organic matter degradation. The effect of different processes was investigated, and efficiency was ranked from high to low as; HEF > anodic oxidation-H₂O₂ > anodic oxidation > adsorption. Under the optimum conditions; pH: 3.5, current density: 7.37 mA/cm², reaction time: 79.43 min, and catalyst dose: 0.06 g/L, COD removal efficiency reached a maximum of 97.08%. The energy consumption and cost to remove 1 kg COD were 10.87 kWh and $1.41. The degradation of COD fitted the pseudo-first-order model. The nano-catalyst was stable and reusable with a minimum yield of 78.12% after 5 cycles.

Improved Magnetite Nanoparticle Immobilization on a Carbon Felt Cathode in the Heterogeneous Electro-Fenton Degradation of Aspirin in Wastewater

Toward the improvement of the application of heterogeneous electro-Fenton in water treatment, we report a new strategy of enhancing the immobilization of a magnetite nanoparticle catalyst on a carbon felt cathode. Exploiting the intrinsic ferrimagnetic properties of magnetite nanoparticles, magnet bars were used to attach the magnetite into the void spaces of the porous carbon felt (CF) cathode. The magnetite nanoparticles were prepared by coprecipitation with variations in the molar ratios of Fe²⁺/Fe³⁺. The magnetite was characterized, attached onto the CF electrode with magnetic bars, and used in the heterogeneous electro-Fenton (EF) degradation of aspirin. The effects of the following on the degradation were studied: Fe²⁺/Fe³⁺, pH, catalyst loading concentration, and voltage. The heterogeneous EF degradation of aspirin in wastewater improved by 23% when magnetic bars were used to enhance the immobilization of the magnetite catalysts. The 1:4 Fe²⁺/Fe³⁺ ratio resulted in the highest hetero-EF catalytic degradation of aspirin with complete degradation (100%) achieved after 140 min. For a mixture of pharmaceuticals, degradation percentages of 94.3% (aspirin), 88% (ciprofloxacin), and 80% (paracetamol) in 3 h were obtained. The magnetized magnetite on the cathode was reusable for 10 cycles. Thus, the use of magnets shows a promising strategy to avoid the leaching of ferrimagnetic nanoparticle catalysts embedded in the cathode for heterogeneous EF processes.

Pyrite-mediated advanced oxidation processes: Applications, mechanisms, and enhancing strategies

Proper treatment of wastewater is one of the key issues to the sustainable development of human society, and people have been searching for high-efficiency and low-cost methods for wastewater treatment. This article reviews recent studies about pyrite-mediated advanced oxidation processes (AOPs) in removing refractory organics from wastewater. The basic information of pyrite and its characteristics for AOPs are first introduced. Then, the performance and mechanisms of pyrite-mediated Fenton oxidation, electro-Fenton oxidation, and persulfate oxidation processes are carefully reviewed and presented. Natural pyrite is an abundant low-cost heterogeneous catalyst for AOPs, and the slow release of Fe²⁺ and the self-regulation of solution pH are highlighted characteristics of pyrite-mediated AOPs. In AOPs, the interaction between Fe³⁺ and pyrite facilitates the Fe²⁺ regeneration and the Fe²⁺/Fe³⁺ cycle. Making pyrite into nanoparticles, assisting by ultrasound and light irradiation, and adding exogenous Fe³⁺, organic chelating agents, or biochar is effective to enhance the performance of pyrite-mediated AOPs. Based on the analyses of those pyrite-mediated AOPs and their enhancing strategies, the future development directions are proposed in the aspects of toxicity research, mechanism research, and technological coupling.

S-doped MIL-53 as efficient heterogeneous electro-Fenton catalyst for degradation of sulfamethazine at circumneutral pH

The reduced S-modified MIL-53(Fe) was prepared by sulfurizing MIL-53(Fe) at low temperature, which was an efficient electro-Fenton catalyst at wide pH range (3-9) for sulfamethazine (SMT) degradation. The best temperature and MIL-53(Fe)/S ratio were 350 °C and 1:2, at which the BET surface area was much enlarged. The MIL-53(Fe) surface was etched by S to many 2D nanosheets with the thickness of ~50 nm, while S_2-2 replaced OH^- to coordinate with Fe²⁺ and increased the Fe²⁺ content, which improved the catalytic performance. Even at initial pH of 7.0, the SMT removal was 95.8%, and the rate constant (k) in the Hetero-EF process was 16-folds of that in the Homo-EF process. The turnover frequency (TOF_d) value of MIL-53(Fe)/S(1:2)-350 was 0.48 L g^-1 min^-1, which was 6.8 times that of commercial FeS₂. The S_2-2in catalyst adjusted the pH superfast, and promoted the generation of Fe²⁺ and thus efficiently activating H₂O₂ to form surface ^·OH, which was verified to be the main radical by EPR and radical scavenger experiments. This catalyst showed promising prospect for environmental application and could be regenerated by sulfidation method. S-doped MIL-53(Fe) was an excellent pH regulator, thus promoting promising application in Hetero-EF processes.

In-situ production and activation of H2O2 for enhanced degradation of roxarsone by FeS2 decorated resorcinol-formaldehyde resins

Fenton technology performs well in high-risk roxarsone (ROX) removal, but it is limited by the high H₂O₂ transportation and storage risks. Herein, FeS₂ decorated resorcinol-formaldehyde resins (FeS₂-RFR) were successfully prepared to in-situ produce and utilize H₂O₂ for efficient removal of ROX. Under solar light illumination, resorcinol-formaldehyde resins (RFR) efficiently generated a high concentration of H₂O₂, with a yield of 500 μmol g^-1 h^-1. FeS₂ can in-situ decompose H₂O₂ to generate ·OH, participating in the oxidation of ROX. As a result, the FeS₂-RFR catalyst degraded more than 97% of ROX within 2 h and ROX was selectively degraded into low-toxic As(V), which can be simply removed by traditional adsorption or precipitation processes. During the degradation of ROX, ·OH played a dominant role. Moreover, the cations (Na⁺, K⁺, and Ca²⁺), anions (SO₄^2-, Cl^-), and humic acid had no noticeable inhibition effect on ROX removal. Furthermore, FeS₂-RFR can still remove 70% of ROX even after three cycles, proving that this in-situ photo-Fenton system exhibited stability. This study innovatively proposed a double-active site FeS₂-RFR photocatalyst for in-situ production and activation of H₂O₂ and showed a sustainable and eco-friendly way for organoarsenic compounds degradation.

Anodized graphite felt as an efficient cathode for in-situ hydrogen peroxide production and Electro-Fenton degradation of rhodamine B

This work investigated that the graphite felt anodized by NaOH, NH₄HCO₃, or H₂SO₄ aqueous, and then as the cathode materials for in-situ hydrogen peroxide (H₂O₂) production and its employed for rhodamine B (RhB) degradation via Electro-Fenton (EF) process. At -0.60 V (vs. SCE), after 120 min electrolysis, the H₂O₂ yield by graphite felt which anodized by 0.2 M H₂SO₄ achieved up 110.5 mg L^-1 in 0.05 M Na₂SO₄ electrolyte. Compared with the raw graphite felt used for cathode, the H₂O₂ yield increased by 15.85 times under the same conditions. The results of Raman spectroscopy demonstrated that graphite felt anodized by H₂SO₄ solution can be achieved the highest defect degree. For the degradation of RhB, the cathode which anodized by H₂SO₄ solution has the highest removal rate. For the degradation rate of RhB, the effect of applied current density, Fe²⁺ ions concentration, pH value were investigated. In addition, suggested that the efficient Fe³⁺ reduction reaction on the cathode surface was an important reason of the high efficiency of RhB degradation. 5-times continuous runs indicated that the modified cathode has remarkable stability and reusability during the EF process.

A novel modified Fe-Mn binary oxide graphite felt (FMBO-GF) cathode in a neutral electro-Fenton system for ciprofloxacin degradation

A graphite felt (GF) cathode was firstly modified by Fe-Mn binary oxide (FMBO), active carbon (AC), carbon black (CB), and polytetrafluoroethylene (PTFE), which exhibits satisfactory ciprofloxacin (CIP) removal efficiency at neutral pH value in electro-Fenton (EF) system. Morphological data showed that modified cathodes have larger surface area and volume pore as well as more active sites. And electrochemical properties have proved stronger current response after modification. In compassion to the unmodified GF, the FMBO/AC/CB modified GF (FMBO-GF) has wider pH range and higher CIP removal efficiency due to its unique nanoparticles structure. The CIP removal efficiency achieved 95.40% in 30 min, and the removal efficiency of total organic carbon (TOC) achieved 93.77% in 2 h when conditions were optimal (25 mg/L initial CIP concentration, 2 mA/cm² current density, FMBO/AC: CB: PTFE of 1:1:5, and 7 initial pH value) in this study. The results of great degradation and mineralization of CIP in this study indicate that the FMBO-GF cathode has huge potential on antibiotics removals in neutral environment.

Enhancement of performance for graphite felt modified with carbon nanotubes activated by KOH as Cathode in electro-fenton systems

The electro-Fenton (EF) process is one of the advanced oxidation processes (AOPs). Graphite felt is widely used as an cathode material for the EF process, and its performance can be improved by surface modification. Active carbon nanotubes (ACNTs) have more oxygen-containing functional groups and better electrochemical properties compared to Multi-wall carbon nanotubes (MWCNTs). In this study, graphite felt was used as the substrate, and composite cathodes were prepared by surface treatment using MWCNT, graphene, and ACNTs. Rhodamine B (RhB) dye decolorization tests were then conducted to investigate the degradation performance of the EF system with different cathodes. The results showed that based on the micromorphology of ACNT, the tubular form of MWCNT was activated into a GR-like flake structure, it was also found that the strength of the oxygen-containing functional groups of ACNT improved significantly. The activated MWCNT/C cathode exhibited a 60-min decolorization rate of 77.28% compared to the unactivated MWCNT/C cathode, whereas the decolorization rate of the ACNT/C cathode increased to 85.01% after activation, which was close to that of the GR/C cathode at 88.55%. In summary, the ACNT/C cathode exhibited degradation efficiency comparable to that of the GR/C cathode.

Iron-carbon microelectrolysis for wastewater remediation: Preparation, performance and interaction mechanisms

Rapid industrialization and urbanization have produced a lot of hazardous substances in water and wastewater, which has turned into a crucial issue to the environment and the public health. Recently, iron carbon microelectrolysis (IC-ME) has attracted extensive attention in environmental remediation due to its low costs and excellent performance. Nevertheless, there is still a lack of a more systematic review on IC-ME preparation methods, their performance, and the interaction mechanisms of IC-ME in the remediation of wastewater. Herein, this work summarizes the synthetic methods, application of IC-ME materials, and the mechanism of pollutant removal by IC-ME. A variety approaches have been applied to prepare IC-ME materials, and the preparation methods and conditions have a certain influence on the properties of IC-ME materials, thus affecting the performance of pollutant removal. The mechanisms of IC-ME for contaminants removal are very complex, including adsorption, coprecipitation, reduction, surface complexation, and oxidation. Moreover, research vacant fields and problems that existed in the application of IC-ME are proposed. At last, the problems to be addressed to adapt IC to future applications are introduced. This paper reviews and prospects IC-ME wastewater remediation technology, which provides a reference for further scientific research and engineering applications.

FeS2/carbon felt as an efficient electro-Fenton cathode for carbamazepine degradation and detoxification: In-depth discussion of reaction contribution and empirical kinetic model

Carbamazepine (CBZ) decay by electro-Fenton (EF) oxidation using a novel FeS₂/carbon felt (CF) cathode, instead of a soluble iron salt, was studied with the aim to accelerate the reaction between H₂O₂ and ferrous ions, which helps to produce more hydroxyl radicals (^•OH) and eliminate iron sludge. First, fabricated FeS₂ and its derived cathode were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy. Anodes were then screened, with DSA (Ti/IrO₂-RuO₂) showing the best performance under EF oxidation regarding CBZ degradation and electrochemical characterization. Several operating parameters of this EF process, such as FeS₂ loading, current density, gap between electrodes (GBE), initial [CBZ], and electrolyte type, were also investigated. Accordingly, a nonconsecutive empirical kinetic model was established to predict changes in CBZ concentration under the given operational parameters. The contribution of different oxidation types to the EF process was calculated using kinetic analysis and quenching experiments to verify the role of the FeS₂-modified cathode. The reaction contributions of anodic oxidation (AO), H₂O₂ electrolysis (EP), and EF oxidation to CBZ removal were 12.81%, 7.41%, and 79.77%, respectively. The ^•OH exposure of EP and EF oxidation was calculated, confirming that ^•OH exposure was approximately 22.45-fold higher using FeS₂-modified CF. Finally, the 19 intermediates formed by CBZ degradation were identified by ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry. Accordingly, four CBZ degradation pathways were proposed. ECOSAR software was used to assess the ecotoxicity of intermediates toward fish, daphnia, and green algae, showing that this novel EF oxidation process showed good toxicity reduction performance. A prolonged EF retention time was proposed to be necessary to obtain clean and safe water, even if the targeted compound was removed at an earlier time.

Selective Leaching of Rare Earth Elements from Ion-Adsorption Rare Earth Tailings: A Synergy between CeO2 Reduction and Fe/Mn Stabilization

The increasing demand for rare earth elements (REEs) motivates the development of novel strategies for cost-effective REE recovery from secondary sources, especially rare earth tailings. The biggest challenges in recovering REEs from ion-adsorption rare earth tailings are incomplete extraction of cerium (Ce) and the coleaching of iron (Fe) and manganese (Mn). Here, a synergistic process between reduction and stabilization was proposed by innovatively using elemental sulfur (S) as reductant for converting insoluble CeO2 into soluble Ce2(SO4)3 and transforming Fe and Mn oxides into inert FeFe2O4 and MnFe2O4 spinel minerals. After the calcination at 400 °C, 97.0% of Ce can be dissolved using a diluted sulfuric acid, along with only 3.67% of Fe and 23.3% of Mn leached out. Thermodynamic analysis reveals that CeO2 was indirectly reduced by the intermediates MnSO4 and FeS in the system. Density functional theory calculations indicated that Fe(II) and Mn(II) shared similar outer electron arrangements and coordination environments, favoring Mn(II) over Ce(III) as a replacement for Fe(II) in the FeO6 octahedral structure of FeFe2O4. Further investigation on the leaching process suggested that 0.5 mol L-1 H2SO4 is sufficient for the recovery of REEs (97.0%). This research provides a promising strategy to selectively recover REEs from mining tailings or secondary sources via controlling the mineral phase transformation.

Enhancing iron redox cycling for promoting heterogeneous Fenton performance: A review

Conventional water treatment methods are difficult to remove stubborn pollutants emerging from surface water. Advanced oxidation processes (AOPs) can achieve a higher level of mineralization of stubborn pollutants. In recent years, the Fenton process for the degradation of pollutants as one of the most efficient ways has received more and more attention. While homogeneous catalysis is easy to produce sludge and the catalyst cannot be cycled. In contrast, heterogeneous Fenton-like reaction can get over these drawbacks and be used in a wider range. However, the reduction of Fe (III) to Fe(II) by hydrogen peroxide (H₂O₂) is still the speed limit step when generating reactive oxygen species (ROS) in heterogeneous Fenton system, which restricts the efficiency of the catalyst to degrade pollutants. Based on previous research, this article reviews the strategies to improve the iron redox cycle in heterogeneous Fenton system catalyzed by iron materials. Including introducing semiconductor, the modification with other elements, the application of carbon materials as carriers, the introduction of metal sulfides as co-catalysts, and the direct reduction with reducing substances. In addition, we also pay special attention to the influence of the inherent properties of iron materials on accelerating the iron redox cycle. We look forward that the strategy outlined in this article can provide readers with inspiration for constructing an efficient heterogeneous Fenton system.

A novel strategy for enhancing heterogeneous Fenton degradation of dye wastewater using natural pyrite: Kinetics and mechanism

Hydrogen peroxide activation by pyrite for degradation of recalcitrant contaminants receives increasing attention. The improvement of catalytic efficiency of natural pyrite is still a challenging issue. This work provides a novel strategy of enhancing catalytic efficiency via pre-reaction between pyrite and hydrogen peroxide. Effects of process factors including pre-reaction time, hydrogen peroxide, solution pH and initial dye concentration were examined. Natural pyrite with low purity was characterized by Raman, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Reaction kinetic verifies tremendous improvement of the reaction rate through pre-reaction. Enhanced dye degradation is ascribed to hydroxyl radical production promoted by self-regulation of pH, Fe²⁺ releasing and Fe²⁺/Fe³⁺ cycle. The plausible mechanism was proposed based on multiple determinations. Dye degradation in different water matrix was efficiently obtained, as well as multicomponent dyes. Additionally, broad operation pH and good reusing performance make the developed process highly attractive for application. This work provides a solid step-forward of pyrite/hydrogen peroxide Fenton process for treatment of recalcitrant contaminants in wastewater.

Heterogeneous Electro-Fenton as “Green” Technology for Pharmaceutical Removal: A Review

The presence of pharmaceutical products in the water cycle may cause harmful effects such as morphological, metabolic and sex alterations in aquatic organisms and the selection/development of organisms resistant to antimicrobial agents. The compounds’ stability and persistent character hinder their elimination by conventional physico-chemical and biological treatments and thus, the development of new water purification technologies has drawn great attention from academic and industrial researchers. Recently, the electro-Fenton process has been demonstrated to be a viable alternative for the removal of these hazardous, recalcitrant compounds. This process occurs under the action of a suitable catalyst, with the majority of current scientific research focused on heterogeneous systems. A significant area of research centres working on the development of an appropriate catalyst able to overcome the operating limitations associated with the homogeneous process is concerned with the short service life and difficulty in the separation/recovery of the catalyst from polluted water. This review highlights a present trend in the use of different materials as electro-Fenton catalysts for pharmaceutical compound removal from aquatic environments. The main challenges facing these technologies revolve around the enhancement of performance, stability for long-term use, life-cycle analysis considerations and cost-effectiveness. Although treatment efficiency has improved significantly, ongoing research efforts need to deliver economic viability at a larger scale due to the high operating costs, primarily related to energy consumption.

High-efficiency electro-catalytic performance of green dill biochar cathode and its application in electro-Fenton process for the degradation of pollutants

Biochar (BC) is a kind of carbon-rich, renewable and low-cost material, which can be prepared from various organic materials.