Photocatalytic and photo-electrochemical behavior of novel SnO2-modified-g-C3N4 for complete elimination of tetracycline under visible-light irradiation: Slurry and fixed-bed approach

Insights on the efficiency and contribution of single active species in photocatalytic degradation of tetracycline: Priority attack active sites, intermediate products and their toxicity evaluation

Photocatalysis has been proven to be an excellent technology for treating antibiotic wastewater, but the impact of each active species involved in the process on antibiotic degradation is still unclear. Therefore, the S-scheme heterojunction photocatalyst Ti3C2/g-C3N4/TiO2 was successfully synthesized using melamine and Ti3C2 as precursors by a one-step calcination method using mechanical stirring and ultrasound assistance. Its formation mechanism was studied in detail through multiple characterizations and work function calculations. The heterojunction photocatalyst not only enabled it to retain active species with strong oxidation and reduction abilities, but also significantly promoted the separation and transfer of photo-generated carriers, exhibiting an excellent degradation efficiency of 94.19 % for tetracycline (TC) within 120 min. Importantly, the priority attack sites, degradation pathways, degradation intermediates and their ecological toxicity of TC under the action of each single active species (·O2-, h+, ·OH) were first positively explored and evaluated through design experiments, Fukui function theory calculations, HPLC-MS, Escherichia coli toxicity experiments, and ECOSAR program. The results indicated that the preferred attack sites of ·O2- on TC were O20, C7, C11, O21, and N25 atoms with high f+ value. The toxicity of intermediates produced by ·O2- was also lower than those produced by h+ and ·OH.

Enhanced photocatalytic activity of V3O7 / V2O5 - reduced graphene oxide nanocomposite towards methylene blue dye degradation

This work investigates the photocatalytic performance of V2O5 and V3O7 nanoparticles and their nanocomposites with rGO. The as-annealed V2O5 and V3O7 nanoparticles exhibited pure orthorhombic and monoclinic structures with an optical bandgap of 2.3 and 2.5 eV, respectively. The corresponding vibrational modes using Raman and FTIR spectroscopy analysis further confirm the form. The morphological studies reveal that V2O5 and V3O7 nanoparticles possess plate and petal-like morphology, respectively. Moreover, in the case of V2O5/V3O7-rGO nanocomposites, the plate/petal-like nanoparticles are embedded within rGO sheets. Incorporating nanoparticles within rGO sheets has quenched the green photoluminescence emission, enhancing their photocatalytic performance upon irradiation with white light of 100 mW/cm2. This is ascribed to the effective transport of interfacial electrons from vanadium oxide nanoparticles to the rGO surface, reducing the recombination of photogenerated charge carriers. These results indicate that the vanadium oxide/rGO nanocomposites have potential applications in wastewater treatment.

Photodegradation of anthelmintic drugs under natural sunlight and simulated irradiation: kinetics, mechanisms, transformation products, and toxicity

Albendazole (ALB) and bithionol (BIT) are two anthelmintic drugs (ADs) with high consumption from benzimidazole group and diphenylsulfide group, respectively. However, information on the transformation of the two anthelmintics under environmental condition is scare. Therefore, in the present study, we investigated the natural attenuation of the two ADs in the aquatic environment, including biodegradation, hydrolysis, and direct and indirect photodegradation. The direct photodegradation occupied a vast portion among other degradation pathways of the two ADs in natural water, with near-surface summer half-lives of 0.272-0.387 h and 0.110-0.520 h for ALB and BIT, respectively. Suspended particles in water were found to facilitate the photodegradation of the two ADs. Study on the indirect photodegradation demonstrated the positive roles of singlet oxygen (1O2) and excited triplet dissolved organic matter (3DOM*) in the photolysis of the two ADs, whereas the hydroxyl radical (•OH) affected little on the overall photodegradation procedures of ALB due to the scavenging effect of HCO3-. Dual effects of DO, DOM, HCO3-, NO3-, and NO2- on the photodegradation of ALB and BIT were perceived. Transformation intermediates (TIs) of the two ADs during photodegradation were analyzed by UHPLC-QTOF-MS. Six TIs of ALB were identified, including a broad-spectrum fungicide carbendazim and another common AD ricobendazole. Two TIs of BIT yielded from dechlorination were also detected. Probable transformation mechanism and predicted aquatic ecotoxicity based on the identified TIs were unveiled.

Enhanced electrocatalytic degradation of tetracycline by ZIF-67@CNT coupled with a self-standing aligned carbon nanofiber anodic membrane

Due to the misuse and overuse of the antibiotic tetracycline (TC), as well as its refractory degradability, it has become a stubborn environmental contaminant. In this study, a self-standing polyacrylonitrile-based ZIF-67@CNT/ACF aligned anodic membrane was fabricated by innovatively incorporating ZIF-67@CNT nanoparticles into an aligned carbon nanofiber (ACF) membrane to treat the TC. The flow-through nanoporous construction of the ZIF-67@CNT/ACF membrane reactor can compress the diffusion boundary layer on the electrode surface to enhance mass transfer under microscopic laminar flow, which can further enhance the degradation rate. In addition, the enhanced degradation performance also benefited from the significant electrooxidation capacity of the ZIF-67@CNT/ACF membrane. At the optimal electrocatalytic condition of 3.0 V applied potential and pH 6, the degradation rate reached 81% in 1 h for an initial TC concentration of 10 mg l-1. The refractory and highly toxic TC was electrochemically degraded into small non-toxic molecules. Our results indicate that electrocatalytic TC degradation can be enhanced by ZIF-67@CNT/ACF membrane.

Tetracycline removal from wastewater via g-C3N4 loaded RSM-CCD-optimised hybrid photocatalytic membrane reactor

In this study, a split-type photocatalytic membrane reactor (PMR), incorporating suspended graphitic carbon nitride (g-C3N4) as photocatalyst and a layered polymeric composite (using polyamide, polyethersulfone and polysulfone polymers) as a membrane was fabricated to remove tetracycline (TC) from aqueous solutions as the world's second most used and discharged antibiotic in wastewater. The photocatalyst was synthesised from melamine by ultrasonic-assisted thermal polymerisation method and, along with the membrane, was characterised using various methods, including Brunauer-Emmett-Teller analysis (BET), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), and Ultraviolet-visible spectroscopy (UV-Vis). The PMR process was optimised, using Design-Expert software for tetracycline removal in terms of UV irradiation time, pH, photocatalyst loading, tetracycline concentration, and membrane separation iteration. It was revealed that a membrane-integrated reactor as a sustainable system could effectively produce clean water by simultaneous removal of tetracycline and photocatalyst from aqueous solution. The maximum removal of 94.8% was obtained at the tetracycline concentration of 22.16 ppm, pH of 9.78 with 0.56 g/L of photocatalyst in the irradiation time of 113.77 min after six times of passing membrane. The PMR system showed reasonable reusability by about a 25.8% drop in TC removal efficiency after seven cycles at optimal conditions. The outcomes demonstrate the promising performance of the proposed PMR system in tetracycline removal from water and suggest that it can be scaled as an effective approach for a sustainable supply of antibiotic-free clean water.

Sodium carbonate/biochar-supported sodium alginate-modified nano zero-valent iron for complete adsorption and degradation of tetracycline in aqueous solution

The aggregation of nanoscale zero-valent iron (NZVI) is one of the biggest challenges for its application when treating contaminants in aquatic environment. We report a study on synthesis of sodium carbonate-modified biochar (BC-600) combined with sodium alginate (SA)-modified NZVI (SA/NZVI@BC-600) for the removal of tetracycline (TC). When the initial concentration of TC was 20 mg/L, 100% TC was removed by SA/NZVI@BC-600 at an initial pH of 7 under room temperature of 25 °C within 90 min. In addition, the reactivity of the SA/NZVI@BC-600 composites toward TC removal was not obviously declined after 4 cycles. SA/NZVI@BC-600 shows high reactivity, stability, and reusability. This excellent performance of SA/NZVI@BC-600 was related to the addition of SA and BC-600. The best performance of the SA/NZVI@BC-600 system was observed under weakly acidic and neutral conditions. Increasing the initial concentration and lowering the reaction temperature had a slight negative effect on the removal of TC by SA/NZVI@BC-600. In addition, the presence of CO32- and HCO3- had a significant negative effect on the degradation of TC. Meanwhile, ·OH and ·O2- played the leading role in TC degradation. This study not only reported a novel strategy of synthesizing an excellent BC modified NZVI based catalyst but also evaluated its promising application for antibiotic degradation in aqueous solution.

Insight on the structural, electronic and optical properties of Zn, Ga-doped/dual-doped graphitic carbon nitride for visible-light applications

The density functional theory (DFT) was applied for the first time to study the doping and co-doping of Ga and Zn metals on graphitic carbon nitride (g-C3N4). The doping of these metal impurities into g-C3N4 leads to a significant decrease in the bandgap energy. Moreover, the co-doping leads to even lower bandgap energy than either individual Zn or Ga-doped g-C3N4. The theoretical electronic and optical properties including the density of state (DOS), energy levels of the frontier orbital, excited state lifetime, and molecular electrostatic potential of the doped and co-doped g-C3N4 support their application in UV-visible light-based technologies. The quantum mechanical parameters (energy band gap, binding energy, exciton energy, softness, hardness) and dipole moment exhibit higher values (ranging from 1.36 to 4.94 D) compared to the bare g-C3N4 (0.29 D), indicating better solubility in the water solvent. The time-dependent DFT (TD-DFT) calculations showed absorption maxima in between the UV-Vis region (309-878 nm). Additionally, charge transfer characteristics, transition density matrix (TDM), excited state lifetime and light harvesting efficiency (LHE) were investigated. Overall, these theoretical studies suggest that doped and co-doped g-C3N4 are excellent candidates for electronic semiconductor devices, light-emitting diodes (LEDs), solar cells, and photodetectors.

Unleashing the power of sunlight: Bi2O3/Sb2S3 photocatalysis for sustainable wastewater remediation of Tetracycline and Rhodamine-B

The use of heterojunction photocatalysts for pollutant decomposition has garnered significant interest in mitigating water contamination and environmental pollution. Our present study focuses on synthesizing Bi2O3/Sb2S3 heterojunction photocatalyst having variable mole ratios by employing a hydrothermal technique. Loading Sb2S3 onto Bi2O3 enables broad-spectrum solar light absorption, efficient segregation of charges, and enhanced surface area, which are excellent traits for photocatalysis. Both Bi2O3 and Sb2S3 showed nano-rod type morphology, while Sb2S3 was present as smaller nano-rods and Bi2O3 as larger ones. The photocatalytic performance of this heterojunction photocatalyst was examined using Rhodamine-B (RhB) and Tetracycline (TC) under solar light illumination for 120 min. Remarkable decomposition efficiency was achieved, with a 98.2% degradation rate observed for RhB having a rate constant of 0.03149 min-1. Similar experiments were conducted using other light sources as well, such as visible light and UV light. However, only 83% and 69% RhB degradation rates were attained with visible and UV light, respectively, indicating that natural sunlight is the superior light source for our catalyst. A 91.5% degradation rate was achieved for TC with the rate constant of 0.01749 min-1, in the presence of sunlight for 120 min. A small amount (0.3 g/L) of 1:3 Bi2O3/Sb2S3 (13BOSBS) photocatalyst was enough to bring such a good result. The photocatalytic activity of our catalyst, that is, 98.2% RhB degradation, is much higher than that of commercially available TiO2-P25 powder, as the latter only achieved 52% RhB degradation. The pH at which the surface of Bi2O3/Sb2S3 has a zero charge (pHpzc) was determined to be 5.37 and the maximum decomposition of RhB was achieved at pH 7. Reusability tests verified the remarkable stability of this catalyst, with about 74.4% of RhB degradation still present after seven consecutive cycles. Scavenger experiments highlighted the crucial role of •OH radicals in the photodecomposition mechanism, as the incorporation of DMSO significantly influenced the photocatalytic efficiency of the 13BOSBS composite, leading to a notable decrease to 37.5% in RhB degradation. For the RhB dye, the 13BOSBS catalyst demonstrated remarkable 90.2% and 85% reductions in COD and TOC, respectively. The commercially available TC powder substantially reduced 84% in COD and 80% in TOC, whereas there was a 78% reduction in COD and 73% in TOC for TC tablets. The degradation of the contaminants was followed by the formation of simpler intermediates, which were discovered using the GC-MS approach. Owing to its excellent attributes and simple synthesis method, the fabricated heterojunction offers a promising solution to prevent the persistent buildup of harmful toxic pollutants in industrial wastewater systems.

Sunlight active cellulose/g-C3N4/TiO2nano-photocatalyst for simultaneous degradation of methylene blue dye and atenolol drug in real wastewater

The paper critically addresses two contemporary environmental challenges, the water crisis and the unrestricted discharge of organic pollutants in waterways together. An eco-friendly method was used to fabricate a cellulose/g-C3N4/TiO2photocatalytic composite that displayed a remarkable degradation of methylene blue dye and atenolol drug under natural sunlight. Introducing graphitic carbon nitride (g-C3N4) onto pristine TiO2improved hybrid material's photonic efficacy and enhanced interfacial charge separation. Furthermore, immobilizing TiO2/g-C3N4on a semi-interpenetrating cellulose matrix promoted photocatalyst recovery and its reuse, ensuring practical affordability. Under optimized conditions, the nano-photocatalyst exhibited ∼95% degradation of both contaminants within two hours while retaining ∼55% activity after ten cycles demonstrating a promising photostability. The nano-photocatalyst caused 66% and 57% reduction in COD and TOC values in industrial wastewater containing these pollutants. The photocatalysis was fitted to various models to elucidate the degradation kinetics, while LC-MS results suggested the mineralization pathway of dye majorly via ring opening demethylation. >98% disinfection was achieved againstE. coli(104-105CFU·ml-1) contaminated water. This study thus paves multifaceted strategies to treat wastewater contaminants at environmental levels employing nano-photocatalysis.

Modification of the electronic structure of g-C3N4 using urea to enhance the visible light-assisted degradation of organic pollutants

Graphitic carbon nitride has been proven to be a good candidate for using solar energy for photo-induced pollutant degradation. However, the high photo-induced holes-electron recombination rate, unfavorable morphology, and textural properties limited their application. In this study, we present a novel g-C3N4 with a novel electronic structure and physiochemical properties by introducing a single nitrogen in the graphitic network of the g-C3N4 through a novel method involving step-by-step co-polycondensation of melamine and urea. Through extensive characterization using techniques such as XPS, UPS-XPS, Raman, XRD, FE-SEM, TEM, and N2 adsorption-desorption, we analyze the electronic and crystallographic properties, as well as the morphology and textural features of the newly prepared g-C3N4 (N-g-C3N4). This material exhibits a lower C/N ratio of 0.62 compared to conventional g-C3N4 and a reduced band gap of 2.63 eV. The newly prepared g-C3N4 demonstrates a distinct valance band maxima that enhances its photo-induced oxidation potential, improving photocatalytic activity in degrading various organic pollutants. We thoroughly investigate the photocatalytic degradation performance of N-g-C3N4 for Congo red (CR) and sulfamethoxazole (SMX), and removal of up to 90 and 86% was attained after 2 h at solution pH of 5.5 for CR and SMX. The influence of different parameters was examined to understand the degradation mechanism and the influence of reactive oxygenated species. The catalytic performance is also evaluated in the degradation of various organic pollutants, and it showed a good performance.

Incorporation of g-C3N4 nanosheets and CuO nanoparticles on polyester fabric for the dip-catalytic reduction of 4 nitrophenol

In the present work, we present the preparation of a new emerged heterogeneous catalyst (PE/g-C3N4/CuO) by in situ deposition of copper oxide nanoparticles (CuO) over the graphitic carbon nitride (g-C3N4) as the active catalyst and polyester (PE) fabric as the inert support. The synthesized sample (PE/g-C3N4/CuO) "dip catalyst" was studied by using various analytical techniques (Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy and dispersive X-ray spectroscopy (SEM/EDX), and transmission electron microscopy (TEM). The nanocomposite is utilized as heterogeneous catalysts for the 4-nitrophenol reduction in the presence of NaBH4, in aqueous solutions. According to experimental results, PE/g-C3N4/CuO with a surface of 6 cm2 (3 cm × 2 cm) demonstrated the catalyst exhibit excellent catalytic activity with 95% reduction efficiency for only 4 min of reaction and an apparent reaction rate constant (Kapp) of 0.8027 min-1. Further evidence that this catalyst based on prepared PE support can be a good contender for long-lasting chemical catalysis comes from the remarkable stability after 10 repetitions reaction cycles without a noticeably loss in catalytic activity. The novelty of this work consists to fabricate of catalyst based of CuO nanoparticles stabilized with g-C3N4 on the surface of an inert substrate PE, which results in an heterogenous dip-catalyst that can be easily introduced and isolated from the reaction solution with good retention of high catalytic performance in the reduction of 4-nitrophenol.

Efficiency and mechanism on photocatalytic degradation of fluoranthene in soil by Z-scheme g-C3N4/α-Fe2O3 photocatalyst under simulated sunlight

Polycyclic aromatic hydrocarbons (PAHs) in soil have potential harm on human health. However, remediation of PAH-contaminated soils through photocatalytic technology remains a challenge. Therefore, the photocatalyst g-C₃N₄/α-Fe₂O₃ was synthesized and applied to photocatalytic degradation of fluoranthene in soil. The physicochemical properties of g-C₃N₄/α-Fe₂O₃ and various degradation parameters, such as catalyst dosage, the ratio of water/soil, and initial pH, were investigated in detail. In soil slurry reaction system (water/soil=10:1, w/w), the optimal degradation efficiency on fluoranthene was 88.7% after simulated sunlight irradiation for 12 h (contaminated soil=2 g, initial fluoranthene concentration=36 mg/kg, catalyst dosage=5%, and pH=6.8), and the photocatalytic degradation followed pseudo-first-order kinetics. The degradation efficiency of g-C₃N₄/α-Fe₂O₃ was higher compared with P25. Degradation mechanism analysis showed that •O₂^- and h⁺ are the main active species in photocatalytic degradation process of fluoranthene by g-C₃N₄/α-Fe₂O₃. Coupling g-C₃N₄ and α-Fe₂O₃ enhances the interfacial charge transport capacity via Z-scheme charge transfer route and inhibits the recombination of photogenerated electrons and holes of g-C₃N₄ and α-Fe₂O₃, then significantly improves the production of active species and photocatalytic activity. Results showed that photocatalytic treatment of soil by g-C₃N₄/α-Fe₂O₃ is an effective strategy for remediation of soils contaminated by PAHs.

Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation

Industrial expansion and increased water consumption have created water scarcity concerns. Meanwhile, conventional wastewater purification methods have failed to degrade recalcitrant pollutants efficiently. The present review paper discusses the recent advances and challenges in photocatalytic processes applied for industrial effluents treatment, with respect to phenolic compounds degradation. Key operational parameters including the catalyst loading, light intensity, initial pollutants concentration, pH, and type and concentrations of oxidants are evaluated and discussed. Compared to the other examined controlling parameters, pH has the highest effect on the photo-oxidation of contaminants by means of the photocatalyst ionization degree and surface charge. Furthermore, major phenolic compounds derived from industrial sources are comprehensively presented and the applicability of photocatalytic processes and the barriers in practical applications, including high energy demand, technical challenges, photocatalyst stability, and recyclability have been explored. The importance of energy consumption and operational costs for realistic large-scale processes are also discussed. Finally, research gaps in this area and the suggested direction for improving degradation efficiencies in industrial applications are presented. In the light of these premises, selective degradation processes in real water matrices such as untreated sewage are proposed.

Mechanism of a double-channel nitrogen-doped lignin-based carbon on the highly selective removal of tetracycline from water

A high-performance nitrogen-doped lignin-based carbon material (ILAC-N) was synthesized using industrial lignin and urea by hydrothermal and activation, as an absorbent of tetracycline hydrochloride (TC). The results showed that the ILAC-N comprises a double-channeled structure with micro and mesopores. It exhibits an excellent adsorption capacity of TC across a wide pH range (pH 2-11), with the highest adsorption capacity of 1396 mg g^-1 at 323 K. Tests in actual wastewater showed that the TC removal rate by ILAC-N exceeded 97.4%. Moreover, it maintained a removal rate of 84% after 10 regeneration cycles, revealing its high reusability. Mechanisms suggested that pore filling and π-π interaction played a critical role in this process. In conclusion, ILAC-N can be broadly applied to livestock manure and pharmaceutical wastewater treatment, owing to its high adsorption capacity, good adsorption properties across a wide pH range, excellent reusability. Furthermore, this research opens a new path for lignin utilization.

Fly ash-, foundry sand-, clay-, and pumice-based metal oxide nanocomposites as green photocatalysts

Metal oxides possess exceptional physicochemical properties which make them ideal materials for critical photocatalytic applications. However, of major interest, their photocatalytic applications are hampered by several drawbacks, consisting of prompt charge recombination of charge carriers, low surface area, inactive under visible light, and inefficient as well as expensive post-treatment recovery. The immobilization of metal oxide semiconductors on materials possessing high binding strength eliminates the impractical and costly recovery of spent catalysts in large-scale operations. Notably, the synthesis of green material (ash, clay, foundry sand, and pumice)-based metal oxides could provide a synergistic effect of the superior adsorption capacity of supporting materials and the photocatalytic activity of metal oxides. This phenomenon significantly improves the overall degradation efficiency of emerging pollutants. Inspired by the novel concept of "treating waste with waste", this contribution highlights recent advances in the utilization of natural material (clay mineral and pumice)- and waste material (ash and foundry sand)-based metal oxide nanocomposites for photodegradation of various pollutants. First, principles, mechanism, challenges towards using metal oxide as photocatalysts, and immobilization techniques are systematically summarized. Then, sources, classifications, properties, and chemical composition of green materials are briefly described. Recent advances in the utilization of green materials-based metal oxide composites for the photodegradation of various pollutants are highlighted. Finally, in the further development of green materials-derived photocatalysts, we underlined the current gaps that are worthy of deeper research in the future.

Natural clay minerals and fly ash waste as green catalysts for heterogeneous photo-Fenton reactions

This review highlights recent advances in the use of natural clay minerals and fly ash waste as efficient catalysts for the heterogeneous photo-Fenton degradation of emerging contaminants.