Removal of diclofenac in water using peracetic acid activated by zero valent copper

New insights into the pH-dependent removal of sulfamethoxazole in peracetic acid activation systems: From mechanistic exploration to practical application potentials

Peracetic acid (PAA) as emerging oxidant in advanced oxidation processes (AOPs) has attracted widespread attention in purifying water pollution. In this research, the removal of target contaminant (sulfamethoxazole, SMX) was investigated through PAA activation by a facile catalyst (Co@C), and the active sites of catalyst were identified as sp3-C, Oads, and Co0 by correlation analysis. Especially, different pH adjustment strategies were designed, including System A (adjusting pH after adding PAA) and System B (adjusting pH before adding PAA), to investigate the impact of oxidant acidity and alkalinity on solution microenvironment as well as effect and mechanism of pollutant removal. The results showed that HO· and CH3C(O)OO· dominated in System A, while Co(IV)O2+ was also observed in System B. Both systems showed optimal SMX degradation (98 %). However, System A exhibited excellent water quality tolerance (efficiency > 78 %), superior sustained catalyst activation (efficiency > 80 % in 40 h), less ion leaching (41 μg L-1), and lower products toxicity. Moreover, the pH of solution after reaction in System B was intensely acidic, requiring costly pH adjustments for discharge. This study unveils the strategy of adjusting pH after adding PAA is preferable for water purification, enriching the emerging research of PAA-based AOPs for the remediation of environments.

Refining metallic nano-copper by electron-rich black carbon for superior Fenton-like catalysis in water purification: The capacitive regulation of corrosive electron transfer

Transition metals are promising catalysts for environmental remediation. However, their low reactivity, poor stability and weak reusability largely limit practical applications. Herein, we report that the electron-rich dissolved black carbon (DBC) incorporated into the nanoscale zero-valent copper (nZVCu) can boost intrinsic reactivity, structural stability and cyclic reusability for superior peroxymonosulfate (PMS) activation and pollutant degradation. A series of refractory pollutants can be effectively removed on the DBC/nZVCu, in comparison with the nZVCu reference. Hydroxyl radical (‧OH) is identified as the dominant reactive oxygen species by electron spin resonance (ESR) and chemical quenching tests, mediated by the metastable Cu(III) as the key reactive intermediate. The electron-rich DBC protects nanoscale Cu from oxidative corrosion to slow down the surface formation of inert CuO layer, rendered by the thermodynamically and dynamically capacitive regulation of corrosive electron transfer from metallic core. By this refining way, the conducive DBC improves the neighboring utilization of reactive electron during metal corrosion, oxidant activation, radical generation and pollutant degradation in Fenton-like catalysis. Our findings suggest that the ubiquitous DBC can be an efficient chelating agent to refine transition metals by serving as the surface deactivator and electron mediator, and take new insights into their environmental and agricultural geochemistry.

Photo-assisted natural chalcopyrite activated peracetic acid for efficient micropollutant degradation

The effective activation of natural chalcopyrite (CuFeS2) on peracetic acid (PAA) to remove organic micropollutants was studied under visible light irradiation. Results showed than an effective sulfamethoxazole (SMX) degradation (95.0 %) was achieved under visible light irradiation for 30 min at pH 7.0. Quenching experiments, electron spin resonance analysis, and LC/MS spectrum demonstrated that HO• and CH3C(O)OO• were the main reactive species for SMX degradation, accounting for 43.3 % and 56.7 % of the contributions, respectively. Combined with X-ray photoelectron spectroscopy analysis, the photoelectrons generated on CuFeS2 activated by visible light enhanced the Fe3+/Fe2+ and Cu2+/Cu+ cycles on the surface, thereby activating PAA to generate HO•/CH3C(O)OO•. The removal rate of SMX decreased with the increase in wavelengths, due to the formation of low energy photons at longer wavelengths. Besides, the optimal pH for degradation of SMX by CuFeS2/PAA/Vis-LED process was neutral, which was attributed to the increasing easily activated anionic form of PAA during the increase in pH and the depletion of Fe species at alkaline conditions. Cl-, HCO3-, and HA slightly inhibited SMX degradation because of reactive species being quenched and/or shielding effect. Furthermore, the degradation efficiency of different pollutants by CuFeS2/PAA/Vis-LED was also measured, and the removal efficiency was different owing to the selectivity of CH3C(O)OO•. Finally, the process exhibited good applicability in real waters. Overall, this study provides new insight into visible light-catalyzed activation of PAA and suggests on further exploration of the intrinsic activation mechanism of PAA.

Kumquat peel-derived biochar to support zeolitic imidazole framework-67 (ZIF-67) for enhancing peracetic acid activation to remove acetaminophen from aqueous solution

This study presents the synthesis of a novel composite catalyst, ZIF-67, doped on sodium bicarbonate-modified biochar derived from kumquat peels (ZIF-67@KSB3), for the enhanced activation of peracetic acid (PAA) in the degradation of acetaminophen (APAP) in aqueous solutions. The composite demonstrated a high degradation efficiency, achieving 94.3% elimination of APAP at an optimal condition of 200 mg L-1 catalyst dosage and 0.4 mM PAA concentration at pH 7. The degradation mechanism was elucidated, revealing that superoxide anion (O2•-) played a dominant role, while singlet oxygen (1O2) and alkoxyl radicals (R-O•) also contributed significantly. The degradation pathways of APAP were proposed based on LC-MS analyses and molecular electrostatic potential calculations, identifying three primary routes of transformation. Stability tests confirmed that the ZIF-67@KSB3 catalyst retained an 86% efficiency in APAP removal after five successive cycles, underscoring its durability and potential for application in pharmaceutical wastewater treatment.

Efficient activation of peracetic acid by cobalt modified nitrogen-doped carbon nanotubes for drugs degradation: Performance and mechanism insight

Peracetic acid (PAA) has garnered significant attention as a novel disinfectant owing to its remarkable oxidative capacity and minimal potential to generate byproducts. In this study, we prepared a novel catalyst, denoted as cobalt modified nitrogen-doped carbon nanotubes (Co@N-CNTs), and evaluated it for PAA activation. Modification with cobalt nanoparticles (∼4.8 nm) changed the morphology and structure of the carbon nanotubes, and greatly improved their ability to activate PAA. Co@N-CNTs/PAA catalytic system shows outstanding catalytic degradation ability of antiviral drugs. Under neutral conditions, with a dosage of 0.05 g/L Co@N-CNT-9.8 and 0.25 mM PAA, the removal efficiency of acyclovir (ACV) reached 98.3% within a mere 10 min. The primary reactive species responsible for effective pollutant degradation were identified as acetylperoxyl radicals (CH3C(O)OO•) and acetyloxyl radicals (CH3C(O)O•). In addition, density functional theory (DFT) proved that Co nanoparticles, as the main catalytic sites, were more likely to adsorb PAA and transfer more electrons than N-doped graphene. This study explored the feasibility of PAA degradation of antiviral drugs in sewage, and provided new insights for the application of heterogeneous catalytic PAA in environmental remediation.

Infancy of peracetic acid activation by iron, a new Fenton-based process: A review

The exacerbated global water scarcity and stricter water directives are leading to an increment in the recycled water use, requiring the development of new cost-effective advanced water treatments to provide safe water to the population. In this sense, peracetic acid (PAA, CH3C(O)OOH) is an environmentally friendly disinfectant with the potential to challenge the dominance of chlorine in large wastewater treatment plants in the near future. PAA can be used as an alternative oxidant to H2O2 to carry out the Fenton reaction, and it has recently been proven as more effective than H2O2 towards emerging pollutants degradation at circumneutral pH values and in the presence of anions. PAA activation by homogeneous and heterogeneous iron-based materials generates - besides HO• and FeO2+ - more selective CH3C(O)O• and CH3C(O)OO• radicals, slightly scavenged by typical HO• quenchers (e.g., bicarbonates), which extends PAA use to complex water matrices. This is reflected in an exponential progress of iron-PAA publications during the last few years. Although some reviews of PAA general properties and uses in water treatment were recently published, there is no account on the research and environmental applications of PAA activation by Fe-based materials, in spite of its gratifying progress. In view of these statements, here we provide a holistic review of the types of iron-based PAA activation systems and analyse the diverse iron compounds employed to date (e.g., ferrous and ferric salts, ferrate(VI), spinel ferrites), the use of external ferric reducing/chelating agents (e.g., picolinic acid, l-cysteine, boron) and of UV-visible irradiation systems, analysing the mechanisms involved in each case. Comparison of PAA activation by iron vs. other transition metals (particularly cobalt) is also discussed. This work aims at providing a thorough understanding of the Fe/PAA-based processes, facilitating useful insights into its advantages and limitations, overlooked issues, and prospects, leading to its popularisation and know-how increment.

Bimetallic metal-organic framework as a high-performance peracetic acid activator for sulfamethoxazole degradation

A novel 3D bimetallic metal-organic framework (MOF(Fe-Co)) was successfully prepared and its performance on sulfamethoxazole (SMX) removal in advanced oxidation process (AOP) based on peracetic acid (PAA) was evaluated. MOF(Fe-Co) exhibited an efficient catalytic performance on PAA activation for SMX degradation under neutral condition. Increasing PAA concentration could enhance SMX removal, while the variation of MOF(Fe-Co) dosage from 0.05 to 0.2 g/L had an inappreciable effect on SMX removal. According to the results of inductively coupled plasma mass spectrometry analyses and X-ray photoelectron spectroscopy, catalytic reactions mainly occurred on the surface of MOF(Fe-Co). Organic radicals (i.e., CH3C(O)OO• and CH3C(O)O•) were demonstrated to be the predominant reactive radicals for SMX degradation by MOF(Fe-Co)/PAA through radical quenching experiments. The presence of Cl- could enhance the degradation of SMX by MOF(Fe-Co)/PAA, while HCO3- and natural organic matter inhibited SMX degradation severely. Five identified degradation products were detected in this system and four possible SMX transformation pathways were proposed, including amino oxidation, S-N bond cleavage, coupling reaction and hydroxylation.

Recent Advances in Nanoscale Zero-Valent Iron (nZVI)-Based Advanced Oxidation Processes (AOPs): Applications, Mechanisms, and Future Prospects

The fast rise of organic pollution has posed severe health risks to human beings and toxic issues to ecosystems. Proper disposal toward these organic contaminants is significant to maintain a green and sustainable development. Among various techniques for environmental remediation, advanced oxidation processes (AOPs) can non-selectively oxidize and mineralize organic contaminants into CO2, H2O, and inorganic salts using free radicals that are generated from the activation of oxidants, such as persulfate, H2O2, O2, peracetic acid, periodate, percarbonate, etc., while the activation of oxidants using catalysts via Fenton-type reactions is crucial for the production of reactive oxygen species (ROS), i.e., •OH, •SO4-, •O2-, •O3CCH3, •O2CCH3, •IO3, •CO3-, and 1O2. Nanoscale zero-valent iron (nZVI), with a core of Fe0 that performs a sustained activation effect in AOPs by gradually releasing ferrous ions, has been demonstrated as a cost-effective, high reactivity, easy recovery, easy recycling, and environmentally friendly heterogeneous catalyst of AOPs. The combination of nZVI and AOPs, providing an appropriate way for the complete degradation of organic pollutants via indiscriminate oxidation of ROS, is emerging as an important technique for environmental remediation and has received considerable attention in the last decade. The following review comprises a short survey of the most recent reports in the applications of nZVI participating AOPs, their mechanisms, and future prospects. It contains six sections, an introduction into the theme, applications of persulfate, hydrogen peroxide, oxygen, and other oxidants-based AOPs catalyzed with nZVI, and conclusions about the reported research with perspectives for future developments. Elucidation of the applications and mechanisms of nZVI-based AOPs with various oxidants may not only pave the way to more affordable AOP protocols, but may also promote exploration and fabrication of more effective and sustainable nZVI materials applicable in practical applications.

Hydroxylamine enhanced the degradation of diclofenac in Cu(II)/peracetic acid system: Formation and contributions of CH3C(O)O•, CH3C(O)OO•, Cu(III) and •OH

The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)O•, CH3C(O)OO•, Cu(III), and •OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO• was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO• mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O• and •OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.

Advanced oxidation of bisphenols by peracetic acid activated by light and ultrasound

Light and ultrasound have been tested as physical factors activating peracetic acid (PAA) to oxidize bisphenols (BPs). Based on the chemometric approach of the Taguchi method, UV irradiation with a wavelength of 254 nm was selected as the optimal type of PAA activator. The effectiveness of the UV/PAA system was also compared with other oxidation methods. Under optimal conditions ([BPs]0 = 1 mg/L, 1 mM PAA, pH 9, UV 254 nm) the tested bisphenols are completely degraded within 15-60 min. The influence of the matrix on the process of organic micropollutants removal in the UV/PAA system was also investigated. Toxicity assessment leads to the conclusion that the reaction mixture shows limited toxicity towards living organisms.

Vitamin C promoted refractory organic contaminant elimination in the zero-valent iron/peracetic acid system: Efficiency, mechanism and effects of various parameters

The conventional zero-valent iron/peracetic acid (ZVI/PAA) system is severely limited owing to the passivation of ZVI and the low recovery of Fe²⁺. In this study, a reducing agent, vitamin C (H₂A), was used for the first time to enhance the ZVI/PAA system as a way to improve its degradation performance. Under optimal conditions, the removal efficiency of the H₂A/ZVI/PAA system was 82.9%, while that of the H₂A/PAA and ZVI/PAA systems were only 19.0% and 25.6%. Free radical quenching and electron paramagnetic experiments (EPR) confirmed that CH₃C(O)O•, •OH and CH₃C(O)OO• were the major active species for acid orange 7 (AO7) degradation with contributions of 9.7%, 75% and 14.4%, respectively. The degradation mechanism was proposed through UV-vis full-wavelength scanning and chemical oxygen demand (COD) experiments. The removal of AO7 was not affected in the presence of Cl^-, SO₄^2- and HCO₃^-, while inhibition occurred with humic acid. ZVI exhibited excellent catalytic properties and stability, and the removal efficiency of AO7 exceeded 70% after three cycles. Additionally, the H₂A/ZVI/PAA system showed good ability to remove AO7 in well water, lake water, river water and reservoir water, and the elimination efficiency of MO, DCF and ACE also exceeded 70%. Overall, this study contributes new cognition for enhancing the ZVI/PAA system to degrade contaminants, which is expected to achieve a cleaner water environment.

Enhanced tetracycline abatement by peracetic acid activation with sulfidation of nanoscale zerovalent iron

Iron-based heterogeneous catalysts due to the environmental friendliness have been widely studied for activation of peracetic acid (PAA) for abatement of organic contaminants in the water and wastewater treatment. However, the slow reduction from Fe(III) to Fe(II) of the iron-based catalysts as the rate-limiting step results in the low PAA activation efficiency. With regard to the excellent electron-donating capability of the reductive sulfur species, sulfidized nanoscale zerovalent iron is proposed for PAA activation (simplified as the S-nZVI/PAA process) and the tetracycline (TC) abatement efficacy and mechanism of this process are elucidated. The optimal sulfidation ratio (S/Fe) of S-nZVI is 0.07, which exhibits superior performance in PAA activation for TC abatement with the efficiency of 80-100% in the pH range of 4.0-10.0. The radical quenching experiments and oxygen release measurements confirm that acetyl(per)oxygen radicals (CH₃C(O)OO•) are the main radical contributing to TC abatement. The influence of sulfidation on the crystalline structure, hydrophobicity, corrosion potential, and electron transfer resistance of S-nZVI is evaluated. The main sulfur species on the S-nZVI surface are identified as ferrous sulfide (FeS) and ferrous disulfide (FeS₂). The analysis by X-ray photoelectron spectroscopy (XPS) and Fe(II) dissolution suggest that the reductive sulfur species can accelerate the conversion from Fe(III) to Fe(II). In summary, the S-nZVI/PAA process exhibits application prospects for the abatement of antibiotics in the aquatic environments.

Cu0@CuOx-NC modified Zn2In2S5 for photo-self-Fenton system coupling H2O2 in-situ production and decomposition

Although many concerns have been put into photocatalytic hydrogen peroxide (H₂O₂) production, multifunctional catalysis suitable for continuously in-situ H₂O₂ consumption in the field has rarely been investigated. Herein, Cu⁰@CuO_x@nitrogen-doped graphitic carbon (Cu⁰@CuO_x-NC) decorated Zn₂In₂S₅ was successfully prepared for in-situ production and activation H₂O₂, which could achieve effectively photocatalytic self-Fenton degradation of tetracycline (TC). Under visible light irradiation, 5wt% Cu⁰@CuO_x-NC/Zn₂In₂S₅ (CuZS-5) efficiently generated a high yield of H₂O₂ (0.13 mmol L^-1), and Cu⁰@CuO_x-NC could in-situ consume H₂O₂ to generate hydroxyl radicals (•OH), accelerating the oxidation of TC. As a result, the 5 wt% Cu⁰@CuO_x-NC/Zn₂In₂S₅ degraded about 89.3% of TC within 60 min, and the cycle experiments also exhibited sufficient stability. This study achieves a delicate combination of in-situ production and activation of H₂O₂, which is regarded as a promising strategy to eco-friendly promote pollutant degradation in wastewater.

Oxidation towards enrofloxacin degradation over nanoscale zero-valent copper: mechanism and products

Enrofloxacin (ENR) is a widely used veterinary fluoroquinolone antibiotic and is frequently detected in water environments. The degradation of ENR was examined utilizing molecular oxygen mediation using nanometer zero-valent copper (nZVC) as the catalyst in this work. The dosage of nZVC, initial pH, and reaction temperature were investigated as contributing factors to ENR degradation. The effects of Cl^-, NO^3-, SO4^2-, and humic acid on the degradation of ENR were investigated. The actual effects were evaluated using natural water. The reactive oxygen species (ROS) that participated in the reaction were identified, their generation mechanisms were elucidated, and the effects on ENR degradation were assessed. More emphasis was given to exploring ENR degradation and transformation pathways via analyses of HPLC-TOF-MS. Data showed that at 35 ℃, with an initial pH of 3 and exposed to air, an nZVC dose of 0.5 g·L^-1 degraded ENR by 99.51% dramatically. HO^• radicals were identified as the dominant ROS, and conversions among Cu⁰, Cu⁺, and Cu²⁺ played crucial roles in the generation of ROS. The destruction mechanism of ENR was speculated based on analyses of HPLC-TOF-MS results as the transformation of the piperazine ring into an oxidized state with a -COOH substitution with HO^•, which caused ENR to be mineralized and converted into CO₂, H₂O, and [Formula: see text]. The ECOSAR program has been used to evaluate the toxicity of ENR and its degradation products, and oxidative degradation of nZVC significantly reduced its toxicity and increased its biodegradability. This research proposes a capable and practical method for removing ENR from water.

Metabolomic response of microalgae towards diclofenac sodium during its removal from water and concomitant recovery of pigments and lipids

The aim of this work was to assess the efficiency of freshwater green microalga, Chlorella sorokiniana for diclofenac sodium (DFS) removal, and metabolic response of alga to comprehend the metabolic pathways involved/affected during DFS decontamination. Results showed 91.51 % removal of DFS could be achieved within 9 days of algal treatment along with recovery of enhanced value-added bioresources i.e. chlorophyll, carotenoids, and lipids from the spent biomass. DFS also had an effect on enzyme activity including superoxide dismutase (SOD), catalase (CAT), and lipid peroxidation (MDA). Furthermore, metabolomics profiling provided an in-depth insight into changes in the metabolic response of C. sorokiniana wherein DFS induced 32 metabolites in microalgae compared to unexposed-control. This study offers microalgae as a green option for DFS removal, and the metabolomics study complemented with DFS could be an approach to understand the stress-induced strategies of C. sorokiniana for concomitant value-added products recovery in presence of DFS.

Graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) effectively activate peracetic acid for elimination of sulfamethazine in water under neutral condition

In this study, a graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) was prepared and employed for peracetic acid (PAA) activation. The characterization of G@Cu-NPs confirmed that the as-prepared material was composed of Cu⁰ and Cu₂O inside and encapsulated by a graphene shell. Experimental results suggested that the synthesized G@Cu-NPs could activate PAA to generate free radicals for efficiently removing sulfamethazine (SMT) under neutral condition. The formation of graphene shells could strongly facilitated electron transfer from the core to the surface. Radical quenching experiments and electron spin resonance (ESR) analysis confirmed that organic radicals (R-O•) and hydroxyl radicals (•OH) were generated in the G@Cu-NPs/PAA system, and R-O• (including CH₃CO₃• and CH₃CO₂•) was the main contributor to the elimination of SMT. The possible SMT degradation pathways and mechanisms were proposed, and the toxicity of SMT and its intermediates was predicted with the quantitative structure-activity relationship (QSAR) analysis. Besides, the effects of some key parameters, common anions, and humic acid (HA) on the removal of SMT in the G@Cu-NPs/PAA system were also investigated. Finally, the applicability of G@Cu-NPs/PAA system was explored, showing that the G@Cu-NPs/PAA system possessed satisfactory adaptability to treat different water bodies with admirable reusability and stability.

Activated peracetic acid by Mn3O4 for sulfamethoxazole degradation: A novel heterogeneous advanced oxidation process

In this study, a novel peracetic acid (PAA)-based advanced oxidation process using Mn₃O₄ as a catalyst was proposed. A thorough sulfamethoxazole (SMX) removal could be achieved within 12 min in Mn₃O₄/PAA system at neutral pH. The characterization results of fresh and used Mn₃O₄ suggested that ≡Mn(II), ≡Mn(III) and ≡Mn(IV) on Mn₃O₄ were the Mn species for PAA activation, constituting the redox cycles of ≡Mn(II)/≡Mn(III) and ≡Mn(III)/≡Mn(IV) simultaneously. Organic radicals (i.e., CH₃C(O)O^• and CH₃C(O)OO^•) were verified to be the dominant reactive species responsible for SMX degradation in Mn₃O₄/PAA system by radical scavenging experiments. The neutral condition was the most favorable pH for SMX removal in Mn₃O₄/PAA system and the increase of PAA or Mn₃O₄ dosage could enhance SMX degradation. Presence of HCO₃^- and natural organic matter (NOM) could inhibit SMX degradation, while Cl^-, NO₃^- and SO₄^2- had a negligible effect on SMX removal. The thorough SMX removal in successive experiments and characterization results of used Mn₃O₄ suggested the good reusability and stability of Mn₃O₄ for PAA activation. Based on six detected transformation products of SMX, hydroxylation, nitration, bond cleavage and coupling reaction were proposed to be its degradation pathways in Mn₃O₄/PAA system.

Inactivation of fungal spores in water by CuO-activated peracetic acid: Kinetics, mechanism and regrowth

The disinfection of pathogenic microorganisms in water treatment by peracetic acid (PAA)-based advanced oxidation processes (AOPs) has been gaining increasing concern. In this work, the inactivation mechanism, influencing factors and regrowth of two pathogenic Aspergillus species in the system of CuO-activated PAA were studied for the first time. The k values of A. niger and A. flavus inactivated by PAA/CuO system were 3.9 and 2.1-fold higher than those inactivated by PAA alone. PAA concentration and CuO dose were positively correlated with the inactivation efficiency, while humic acid and pH were negatively correlated. The main active species that contributed to the inactivation of fungal spores in PAA/CuO system were •OH, CH₃C(O)OO• and ¹O₂. PAA/CuO system had more intense oxidative stimulation and more serious damage to fungal spores according to the analysis of cell membrane integrity and intracellular ROS levels. In addition, the PAA/CuO system was less impacted by the water matrix and kept a good inactivation efficiency in real water samples. The regrowth potential of fungal spores after disinfection was also reduced in PAA/CuO system so as to avoid the risk of biological regrowth. This study provides a feasible PAA-based advanced oxidation method for activating PAA and inactivating fungal spores.

Nanoscale zerovalent copper (nZVC) catalyzed environmental remediation of organic and inorganic contaminants: A review

Over the past decade, the nano zerovalent copper has emerged as an effective nano-catalyst for the environment remediation processes due to its ease of synthesis, low cost, controllable particle size and high reactivity despite its release during the remediation process and related concentration dependent toxicities. However, the improvised techniques involving the use of supports or immobilizer for the synthesis of Cu⁰ has significantly increased its stability and motivated the researchers to explore the applicability of Cu⁰ for the environment remediation processes, which is evident from access to numerous reports on nano zerovalent copper mediated remediation of contaminants. Initially, this review allows the understanding of the various resources used to synthesize zerovalent copper nanomaterial and the structure of Cu⁰ nanoparticles, followed by focus on the reaction mechanism and the species involved in the contaminant remediation process. The studies comprehensively presented the application of nano zerovalent copper for remediation of organic/inorganic contaminants in combination with various oxidizing and reducing agents under oxic and anoxic conditions. Further, it was evaluated that the immobilizers or support combined with various irradiation sources originates a synergistic effect and have a significant effect on the stability and the redox properties of nZVC in the remediation process. Therefore, the review proposed that the future scope of research should include rigorous focus on deriving an exact mechanism for synergistic effect for the removal of contaminants by supported nZVC.

Review of Advanced Oxidation Processes Based on Peracetic Acid for Organic Pollutants

In recent years, the removal of organic pollutants from water and wastewater has attracted more attention to different advanced oxidation processes (AOPs). There has been increasing interest in using peroxyacetic acid (PAA), an emerging oxidant with low or no toxic by-products, yet the promotion and application are limited by unclear activation mechanisms and complex preparation processes. This paper synthesized the related research results reported on the removal of organic pollutants by PAA-based AOPs. Based on the research of others, this paper not only introduced the preparation method and characteristics of PAA but also summarized the mechanism and reactivity of PAA activated by the free radical pathway and discussed the main influencing factors. Furthermore, the principle and application of the newly discovered methods of non-radical activation of PAA in recent years were also reviewed for the first time. Finally, the shortcomings and development of PAA-based AOPs were discussed and prospected. This review provides a reference for the development of activated PAA technology that can be practically applied to the treatment of organic pollutants in water.

Mechanisms and product toxicity of activated carbon/peracetic acid for degradation of sulfamethoxazole: implications for groundwater remediation

Carbon-based materials activated peracetic acid (PAA) to repair groundwater is an environmentally friendly and low-cost technology to overcome secondary pollution problems. In this study, thermally modified activated carbon (AC600) was applied to activate PAA to degrade sulfamethoxazole (SMX). And the effect of groundwater pH, chloride ion (Cl^-), bicarbonate (HCO₃^-), sulfate ion (SO₄^2-), and natural organic matter (NOM) on SMX removal by AC600/PAA process was studied in detail. PAA could be effectively activated by AC600. Increasing AC600 dose (10-100mg/L) or PAA dosages (0.065-0.39 mM) generally enhanced the SMX removal, the excellent performance in SMX removal was achieved at 50 mg/L AC600 and 0.26 mM PAA. The removal of SMX was well-described by second-order kinetic, with the rate constant (k_obs) of 10.79 M^-1s^-1, both much greater than the removal constants of PAA alone (0.034 M^-1s^-1) and AC600 alone (1.774 M^-1s^-1). R-O·(CH₃C(O)OO·, CH₃C(O)O·) and electron-transfer process were proved to be responsible for the removal of SMX while HO· and ¹O₂ made little to no contribution to the novel PAA/AC600 system, which differs from typical advanced oxidation processes. The SMX can be removed effectively over a wide pH range (3-9), exhibiting a remarkable pH-tolerant performance. Sulfate ion (SO₄^2-), dissolved oxygen (DO), NOM displayed negligible influence on the SMX removal. Bicarbonate (HCO₃^-) exerted an inhibitory effect on SMX abatement, while chloride ion (Cl^-) promoted the removal of SMX. This showed excellent anti-interference capacity and satisfactory decontamination performance under actual groundwater conditions. Furthermore, the degradation pathways of SMX were proposed, there was no obvious difference in the acute toxicity of the mixed products during the degradation process. It will facilitate further research of metal-free catalyst/PAA system as a new strategy for groundwater in-situ remediation technology.

Zero-valent iron supported on expanded graphite from spent lithium-ion battery anodes and ferric chloride for the degradation of 4-chlorophenol in water

Zero-valent iron supported with expanded graphite (ZVI/EG) were successfully prepared from ferric chloride and the graphite of spent lithium-ion battery (LIB) using carbothermic reduction as a new approach for recycling spent LIB. ZVI/EG composites synthesized with different ZVI mass ratios were used as catalysts for the 4-chlorophenol (4-CP) removal from water by heterogeneous Fenton reactions. ZVI/EG composites showed a BET specific surface area of 11.295 m² g^-1. ZVI/EG synthesized from expandable graphite and ferric chloride with mass ratio of 2:1 (ZVI/EG-2) showed the highest removal percentage of 4-CP, being 97% in 1 h. The degradation rate fitted to a pseudo first-order model better, and reached 0.0527 min^-1 for ZVI/EG-2. Moreover, ZVI/EG-2 showed high reactivity for 4-CP removal even in the sixth reuse cycle, being 82%. Hydroquinone and 4-chlorocatechol were identified as the intermediate products of 4-CP degradation. Increasing the ZVI/EG-2 dosage can enhance the 4-CP removal percentage through offering more reactive sites and Fe²⁺ ions. Acidic pH values favorited the 4-CP removal due to the high H⁺ concentrations, while Alkaline pH value inhabited the 4-CP removal. A higher temperature increased the rate of •OH formation and enhanced the 4-CP removal percentage. At a fixed dosage of the ZVI/EG-2, the ratio of available reactive sites was less at higher initial concentrations. These results prove the possibility of synthesizing high active and stable ZVI/EG catalysts using graphite from spent LIB and ferric chloride. These catalysts show promising prospective for the 4-CP removal in water, with comparable activities to others previously reported.

Heat-activated peracetic acid for degradation of diclofenac: kinetics, influencing factors and mechanism

ABSTRACTHeat-activated peracetic acid (PAA) was used to degrade diclofenac (DCF) in this study. Electron paramagnetic resonance and radical scavenging experiments proved that organic radicals (i.e. CH₃C(=O)O• and CH₃C(=O)OO•) were the primary active species for DCF removal in the heat/PAA process. The degradation efficiency of DCF increased with the increase of temperature or initial PAA concentration in the heat/PAA process, and the optimal reaction pH for DCF removal was neutral. The presence of NO₃^- or SO₄^2- insignificantly affected DCF degradation, while Cl^- was favourable for DCF removal in this process. In contrast, an obvious inhibition on the removal of DCF was observed with the addition of natural organic matter, which might be responsible for the lower DCF removal in real waters. Finally, dechlorination, formylation, dehydrogenation and hydroxylation were proposed to be four degradation pathways of DCF in the heat/PAA system based on the five detected transformation products.