Decolorization, degradation and detoxification of carcinogenic sulfonated azo dye methyl orange by newly developed biofilm consortia

Decolourization and detoxification of Reactive Red-195 azo dye by Staphylococcus caprae isolated from textile effluent

Azo dyes are used as coloring agent in textile industries at larger scale. As a result, large quantity of dye-enriched waste water is generated which subsequently poses environmental problems. Biological tool involving bacteria having azoreductase enzyme has proved to be more effective and efficient in dye effluent treatment. Current work focuses on Staphylococcus caprae (S. caprae) for degradation and decolorization of Reactive Red-195 (RR-195) azo dye. For this purpose, factors such as pH, temperature, inoculums, carbon and nitrogen sources, and dye concentrations have been optimized for maximum decolorization and degradation. S. caprae (4 mg/mL) efficiently resulted into 90% decolorization of RR-195 dye under static condition at 100 µg/mL concentration, 30 °C and pH 7.0 at a 12-h contact period. FTIR analysis has revealed the formation of new functional groups in the treated dye such as O-H stretch at 3370 cm-1, C-H band stretching at 2928 cm-1, and new band at 1608 cm-1 which specify the degradation of aromatic ring, 1382 and 1118 cm-1 represents desulfonated peaks. Biodegraded metabolites of RR-195 dye such as phenol, 3, 5-di-tert-butylphenol, and phthalic acid have been identified respectively that find industrial applications. Phytotoxicity test has shown non-toxic effects of treated dye on germination of Vigna radiata and Triticum aestivum seeds. Further, antibiotic diffusion assay has confirmed the biosafety of S. caprae.

A feasible approach for azo-dye (methyl orange) degradation by textile effluent isolate Serratia marcescens ED1 strain for water sustainability: AST identification, degradation optimization and pathway hypothesis

Methyl orange (MO) is a dye commonly used in the textile industry that harms aquatic life, soil and human health due to its potential as an environmental pollutant. The present study describes the dye degradation ability of Serratia marcescens strain ED1 isolated from textile effluent and characterized by 16S rRNA gene sequence analysis. The laccase property of bacterial isolate was confirmed qualitatively. The effects of various factors (pH, temperature, incubation time, and dye concentration) were evaluated using Response Surface Methodology (RSM). The maximum dye (MO) degradation was 81.02 % achieved at 37 °C temperature and 7.0 pH with 200 mg/L dye concentration after 48 h of incubation. The beef extract, ammonium nitrate and fructose supplementation showed better response during bioremediation among the different carbon and nitrogen sources. The degree of pathogenicity was confirmed through the simple plate-based method, and an antibiotic resistance profile was used to check the low-risk rate of antibiotic resistance. However, the fate and extinct of degraded MO products were analysed through UV-Vis spectroscopy, FT-IR, and GC-MS analysis to confirm the biodegradation potential of the bacterial strain ED1 and intermediate metabolites were identified to propose metabolic pathway. The phytotoxicity study on Vigna radiata L. seeds confirmed nontoxic effect of degraded MO metabolites and indicates promising degradation potential of S. marcescens strain ED1 to successfully remediate MO dye ecologically sustainably.

Adsorption and biodegradation of the azo dye methyl orange using Ralstonia pickettii immobilized in polyvinyl alcohol (PVA)-alginate-hectorite beads (BHec-RP)

Biological methods are widely used to treat dye waste, particularly methyl orange (MO) dye. The importance of MO degradation stems from its classification as a toxic dye. Within the scope of this research, successful bio-decolorization of MO was achieved through the use of Ralstonia pickettii bacteria immobilized in a PVA-alginate-hectorite matrix (BHec-RP). The optimum conditions for the degradation were observed at a composition of PVA (10%), hectorite (1%), static incubation, 40 °C, and pH 7. Subsequently, the adsorption kinetics of BHec-RP (dead cells) as well as the degradation kinetics of BHec-RP (live cells) and MO using free R. pickettii cells were evaluated. The decolorization of MO using BHec-RP (dead cells) is an adsorption process following pseudo-first-order kinetics (0.6918 mg g-1 beads) and occurs in a monolayer or physical process. Meanwhile, the adoption of BHec-RP (live cells) and free R. pickettii cells shows a degradation process under pseudo-first-order kinetics, with the highest rates at an initial MO concentration of 50 mg L-1 being 0.025 mg L-1 h-1 and 0.015 mg L-1 h-1, respectively. These results show that the immobilization system is superior compared to free R. pickettii cells. Furthermore, the degradation process shows the inclusion of several enzymes, such as azoreductase, NADH-DCIP reductase, and laccase, presumed to be included in the fragmentation of molecules. This results in five fragments based on LC-QTOF/MS analysis, with m/z values of 267.12; 189.09; 179.07; 169.09; and 165.05.

Hierarchical Porous Activated Carbon from Wheat Bran Agro-Waste: Applications in Carbon Dioxide Capture, Dye Removal, Oxygen and Hydrogen Evolution Reactions

This work reports an efficient method for facile synthesis of hierarchically porous carbon (WB-AC) utilizing wheat bran waste. Obtained carbon showed 2.47 mmol g-1 CO2 capture capacity with good CO2 /N2 selectivity and 27.35 to 29.90 kJ mol-1 isosteric heat of adsorption. Rapid removal of MO dye was observed with a capacity of ~555 mg g-1 . Moreover, WB-AC demonstrated a good OER activity with 0.35 V low overpotential at 5 mA cm-2 and a Tafel slope of 115 mV dec-1 . It also exhibited high electrocatalytic HER activity with 57 mV overpotential at 10 mA cm-2 and a Tafel slope of 82.6 mV dec-1 . The large SSA (757 m2  g-1 ) and total pore volume (0.3696 cm3  g-1 ) result from N2 activation contributing to selective CO2 uptake, high and rapid dye removal capacity and superior electrochemical activity (OER/HER), suggesting the use of WB-AC as cost effective adsorbent and metal free electrocatalyst.

Development of novel amino-ethyl chitosan hydrogel for the removal of methyl orange azo dye model

The present study introduces a new and straightforward method for the amination of Chitosan. This method involves coupling Chitosan (CS) with 2-chloroethylamine (ENH2) in a single step to produce an amino-ethyl Chitosan derivatives with increased amine group content (CS-ENH2) using click chemistry. The resulting derivatives were then crosslinked using Glutaraldehyde to form amino-ethyl Chitosan Schiff bases. The novel amino-ethyl Chitosan Schiff bases were subsequently utilized as adsorbents for the removal of Methyl Orange (MO) dye from aqueous solutions using a batch technique, and the performance of the produced Schiff bases was compared with that of the native Chitosan Schiff base. The CS-ENH2 adsorbents show improved adsorption capacity up to 300% of the native Chitosan Schiff base with almost double removal rate. The adsorption temperature has a positive impact in general while almost 100% of MO removed at 60 °C using CS-ENH2 adsorbents compared with 66% of the native Chitosan Schiff base adsorbent. The adsorption pH shows a negative impact on the MO removal percent. That effect reduced sharply using the CS-ENH2 adsorbents with higher amination degree while the MO removal percent almost being constant over a wide range of pH; 2.0-7.0. The agitation speed has the same positive effect over all the adsorbents. However, the rate of MO removal percent decreased with increase the agitation speed up to 250 rpm. The experimental findings demonstrated that the highest percentage of MO dye removal was achieved under the conditions of pH 2.0, a temperature of 60 °C, agitation speed of 250 rpm, and adsorption duration of 90 min. These Schiff bases were subsequently characterized using advanced analytical techniques including Fourier Transform Infrared spectroscopy, Thermal analysis (TGA and DSC), and Scanning Electron Microscopy.

Decolorization, degradation and detoxification of mutagenic dye Methyl orange by novel biofilm producing plant growth-promoting rhizobacteria

Discharge of untreated dyeing wastewater nearby water-bodies is one of major causes of water pollution. Generally, bacterial strains isolated from industrial effluents and/or contaminated soils are used for the bioremediation of Methyl orange (MO), a mutagenic recalcitrant mono-azo dye, used in textiles and biomedical. However, MO degradation by biofilm producing plant growth-promoting rhizobacteria (BPPGPR) was not studied yet. In this study, 19 out of 21 BPPGPR strains decolorized 96.3-99.9% and 89.5-96.3% MO under microaerophilic and aerobic conditions, respectively from Luria-Bertani broth (LBB) followed by yeast-extract peptone and salt-optimized broth plus glycerol media within 120 h of incubation at 28 °C. Only selected BPPGPR including Pseudomonas fluorescens ESR7, P. veronii ESR13, Stenotrophomonas maltophilia ESR20, Staphylococcus saprophyticus ESD8, and P. parafulva ESB18 were examined for process optimization of MO decolorization using a single factor optimization method. This study showed that under optimal conditions (e.g., LBB, 100 mg L-1 MO, pH 7, incubation of 96 h, 28 °C), these strains could remove 99.1-99.8% and 97.6-99.5% MO under microaerophilic and aerobic conditions, respectively. Total azoreductase and laccase activities responsible for biodegradation were also remarkably activated in the biodegraded samples under optimal conditions, while these activities were repressed under unfavorable conditions (e.g., 40 °C and 7.5% NaCl). This study confirmed that MO was degraded and detoxified by these bacterial strains through breakage of azo bond. So far, this is the first report on bioremediation of MO by the BPPGPR strains. These BPPGPR strains are highly promising to be utilized for the bioremediation of dyeing wastewater in future.

Decolorization of various dyes by microorganisms and green-synthesized nanoparticles: current and future perspective

Various types of colored pigments have been recovered naturally from biological sources including shells, flowers, insects, and so on in the past. At present, such natural colored substances (dyes) are replaced by manmade dyes. On the other hand, due to their continuous usage in various purpose, these artificial dyes or colored substances persist in the environmental surroundings. For example, industrial wastewater contains diverse pollutant substances including dyes. Several of these (artificial dyes) were found to be toxic to living organisms. In recent times, microbial-based removal of dye(s) has gained more attention. These methods were relatively inexpensive for eliminating such contaminants in the environmental system. Hence, various researchers were isolated microbes from environmental samples having the capability of decolorizing synthetic dyes from industrial wastewater. Furthermore, the microorganisms which are genetically engineered found higher degradative/decolorize capacity to target compounds in the natural environs. Very few reviews are available on specific dye treatment either by chemical treatments or by bacteria and/or fungal treatments. Here, we have enlightened literature reports on the removal of different dyes in microbes like bacteria (including anaerobic and aerobic), fungi, GEM, and microbial enzymes and also green-synthesized nanoparticles. This up-to-date literature survey will help environmental managements to co-up such contaminates in nature and will help in the decolorization of dyes.

Carbon Dots from Tire Waste for the Photodegradation of Methyl Orange Dye, Antimicrobial Activity, and Molecular Docking Study

In this study, solvothermal pathway was employed for the synthesis of P, N codoped C-dot using tire waste as a sustainable source of carbon and nitrogen. Comprehensive analyses encompassing X-ray diffraction (XRD) analysis, Transmission Electron Microscopy (TEM), FT-IR, cyclic voltammetry, and UV-Vis spectra were used to assess the crystalline structure, purity, size, fluorescence up-conversion, and morphological attributes of the nanomaterial. Subsequently, the produced C-dots were evaluated for their efficacy in the photocatalytic degradation of methylene blue and methyl orange dyes, demonstrating notable success in degrading methyl orange dye within eight hours in the visible region. Furthermore, the same nanomaterial was applied for carrying out agar disk-diffusion assays against a spectrum of microorganisms. Results revealed substantial inhibition zones against Methicillin-Resistant Staphylococcus aureus (MRSA), Escherichia coli, and Pseudomonas aeruginosa. Elucidating the antimicrobial mechanism, molecular-docking simulations were excuted using on AutoDock Vina with designated ligands. The results indicated a strong binding affinity of the C-dots with certain proteins associated with antibacterial activity. This observation suggests that the synthesized C-dots effectively engage with the active sites of these proteins, indicating their potential as promising antibacterial agents. Importantly, this study implies that C-dots do not induce protein denaturation, thereby warranting further investigation of their utility as antibacterial agents.

Simultaneous microbial electrochemical degradation of methyl orange and bioelectricity generation using coculture as anode inoculum in a microbial fuel cell

Methyl Orange, an azo dye, is a widely used colouring agent in the textile industry. The study aimed to investigate the efficiency of bioremediating bacteria in degrading methyl orange. Escherichia coli (E. coli), a Methyl Orange-degrading bacterium, was isolated from cow dung and its biochemical properties were analysed using 16S rRNA sequencing, and MALDI-TOF MS. A pre-cultured strain of Pseudomonas aeruginosa was co-cultured with E. coli in 1:1 ration in a microbial fuel cell (MFC) for simultaneous electricity production and methyl orange degradation. The degradation was combined with biological wastewater treatment at varying Methyl Orange concentrations, and the electrochemical characteristics were analysed through polarisation study, cyclic voltammetry, and electrochemical impedance spectroscopy. The impact of parameters such as anolyte pH, dye concentration, incubation time, and substrate concentrations were also studied. This study confirmed E. coli as an effective methyl orange degrading bacteria with a maximum % degradation efficiency of 98% after 48 h incubation at pH 7.0. The co-culture of isolated microorganisms at 250 mg/L of methyl orange concentration showed a maximum power density 6.5 W/m3. Further, anode modification with Fe2O3 nanoparticles on the anode surface enhanced power production to 11.2 W/m3, an increase of 4.7 W/m3.

Mathematical modeling for operative improvement of the decoloration of Acid Red 27 by a novel microbial consortium of Trametes versicolor and Pseudomonas putida: A multivariate sensitivity analysis

In this work, it is presented a first approach of a mathematical and kinetic analysis for improving the decoloration and further degradation process of an azo dye named acid red 27 (AR27), by means of a novel microbial consortium formed by the fungus Trametes versicolor and the bacterium Pseudomonas putida. A multivariate analysis was carried out by simulating scenarios with different operating conditions and developing a specific mathematical model based on kinetic equations describing all stages of the biological process, from microbial growth and substrate consuming to decoloration and degradation of intermediate compounds. Additionally, a sensitivity analysis was performed by using a factorial design and the Response Surface Method (RSM), for determining individual and interactive effects of variables like, initial glucose concentration, initial dye concentration and the moment in time for bacterial inoculation, on response variables assessed in terms of the minimum time for: full decoloration of AR27 (R1 = 2.375 days); maximum production of aromatic metabolites (R2 = 1.575 days); and full depletion of aromatic metabolites (R3 = 12.9 days). Using RSM the following conditions improved the biological process, being: an initial glucose concentration of 20 g l-1, an initial AR27 concentration of 0.2 g l-1 and an inoculation moment in time of P. putida at day 1. The mathematical model is a feasible tool for describing AR27 decoloration and its further degradation by the microbial consortium of T. versicolor and P. putida, this model will also work as a mathematical basis for designing novel bio-reaction systems than can operate with the same principle of the described consortium.

New roles for Bacillus thuringiensis in the removal of environmental pollutants

For a long time, the well-known Gram-positive bacterium Bacillus thuringiensis (Bt) has been extensively studied and developed as a biological insecticide for Lepidoptera and Coleoptera pests due to its ability to secrete a large number of specific insecticidal proteins. In recent years, studies have found that Bt strains can also potentially biodegrade residual pollutants in the environment. Many researchers have isolated Bt strains from multiple sites polluted by exogenous compounds and characterized and identified their xenobiotic-degrading potential. Furthermore, its pathway for degradation was also investigated at molecular level, and a number of major genes/enzymes responsible for degradation have been explored. At present, a variety of xenobiotics involved in degradation in Bt have been reported, including inorganic pollutants (used in the field of heavy metal biosorption and recovery and precious metal recovery and regeneration), pesticides (chlorpyrifos, cypermethrin, 2,2-dichloropropionic acid, etc.), organic tin, petroleum and polycyclic aromatic hydrocarbons, reactive dyes (congo red, methyl orange, methyl blue, etc.), and ibuprofen, among others. In this paper, the biodegrading ability of Bt is reviewed according to the categories of related pollutants, so as to emphasize that Bt is a powerful agent for removing environmental pollutants.

Preparation and characterization of a novel nanocomposite based on MnCr-layered double oxide and CoFe2O4 spinel ferrite for methyl orange adsorption

Herein, the adsorption of methyl orange (MO), a dangerous anionic dye, from an aqueous solution was investigated using a novel magnetic nanocomposite adsorbent. A nanocomposite entitled manganese chromium-layered double oxide/cobalt spinel ferrite, (MnCr)-LDO5wt.%/CoFe2O4, which links the interlayer structural characteristics of layered double oxides (LDOs) with the magnetic properties of spinel ferrites (SFs) was synthesized using the eco-friendly co-precipitation technique. Determination of structural parameters, crystallite size, and micro-strain was done using X-ray diffraction (XRD) analysis. Transmission electron microscopy (TEM) was used to determine grain shape and size. Surface analysis was performed using X-ray photoelectron spectroscopy (XPS) to identify elements and oxidation states present in the prepared nanocomposite. Vibrating sample magnetometer (VSM) was utilized to examine the magnetic characteristic. A comprehensive comparative study about the effectiveness and durability of CoFe2O4 and (MnCr)5wt.%/CoFe2O4 as nanoadsorbents for MO was conducted. Numerous variables, including contact time, MO concentration, adsorbent dosage, and pH were tested for their effects on the adsorption removal percentages. The findings showed that the maximum removal percentage was 86.1% for 25 ppm of MO was for 0.1 g/100 mL of (MnCr)-LDO5wt.%/CoFe2O4 at pH = 3. Investigations of isotherms and kinetics were conducted under batch conditions. The Langmuir isotherm matched the experimental data, for both nanoadsorbents, quite well due to the homogeneous distribution of active sites. Adsorption kinetics data were found to be compatible with intra-particle diffusion and pseudo-second order models for CoFe2O4 and (MnCr)5wt.%/CoFe2O4, respectively. A total of five adsorption-desorption cycles were performed to determine the prepared adsorbents' recyclable nature.

Bioprospecting of novel ligninolytic bacteria for effective bioremediation of agricultural by-product and synthetic pollutant dyes

Lignin is a significant renewable carbon source that needs to be exploited to manufacture bio-ethanol and chemical feedstocks. Lignin mimicking methylene blue (MB) dye is widely used in industries and causes water pollution. Using kraft lignin, methylene blue, and guaiacol as a full carbon source, 27 lignin-degrading bacteria (LDB) were isolated from 12 distinct traditional organic manures for the current investigation. The ligninolytic potential of 27 lignin-degrading bacteria was assessed by qualitative and quantitative assay. In a qualitative plate assay, the LDB-25 strain produced the largest zone, measuring 6.32 ± 0.297, on MSM-L-kraft lignin plates, while the LDB-23 strain produced the largest zone, measuring 3.44 ± 0.413, on MSM-L-Guaiacol plates. The LDB-9 strain in MSM-L-kraft lignin broth was able to decolorize lignin to a maximum of 38.327 ± 0.011% in a quantitative lignin degradation assay, which was later verified by FTIR assay. In contrast, LDB-20 produced the highest decolorization (49.633 ± 0.017%) in the MSM-L-Methylene blue broth. The highest manganese peroxidase enzyme activity, measuring 6322.314 ± 0.034 U L^-1, was found in the LDB-25 strain, while the highest laccase enzyme activity, measuring 1.5105 ± 0.017 U L^-1, was found in the LDB-23 strain. A preliminary examination into the biodegradation of rice straw using effective LDB was carried out, and efficient lignin-degrading bacteria were identified using 16SrDNA sequencing. SEM investigations also supported lignin degradation. LDB-8 strain had the highest percentage of lignin degradation (52.86%), followed by LDB-25, LDB-20, and LDB-9. These lignin-degrading bacteria have the ability to significantly reduce lignin and lignin-analog environmental contaminants, therefore they can be further researched for effective bio-waste management mediated breakdown.

g-C3N4 Based Photocatalyst for the Efficient Photodegradation of Toxic Methyl Orange Dye: Recent Modifications and Future Perspectives

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron-hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye.

Microbial biosorbent for remediation of dyes and heavy metals pollution: A green strategy for sustainable environment

Toxic wastes like heavy metals and dyes are released into the environment as a direct result of industrialization and technological progress. The biosorption of contaminants utilizes a variety of biomaterials. Biosorbents can adsorb toxic pollutants on their surface through various mechanisms like complexation, precipitation, etc. The quantity of sorption sites that are accessible on the surface of the biosorbent affects its effectiveness. Biosorption’s low cost, high efficiency, lack of nutrient requirements, and ability to regenerate the biosorbent are its main advantages over other treatment methods. Optimization of environmental conditions like temperature, pH, nutrient availability, and other factors is a prerequisite to achieving optimal biosorbent performance. Recent strategies include nanomaterials, genetic engineering, and biofilm-based remediation for various types of pollutants. The removal of hazardous dyes and heavy metals from wastewater using biosorbents is a strategy that is both efficient and sustainable. This review provides a perspective on the existing literature and brings it up-to-date by including the latest research and findings in the field.

Experimental study on the treatment of dye wastewater by plasma coupled biotechnology

In this experiment, a gas-liquid two-phase discharge water treatment inverse device was designed independently to treat the actual workshop intermediate dye wastewater from a chemical plant. Firstly, the effects of initial concentration of wastewater, initial pH, circulation flow rate of solution, content of Fe²⁺, content of H₂O₂, and addition of tert-butanol on the organic removal rate and decolorization rate of dye wastewater treatment were investigated. The results showed that Fe²⁺ and tert-butanol would react with the active particles (H₂O₂, ·OH) and inhibit the degradation of the dye wastewater, resulting in the decrease of both organic matter degradation rate and decolorization rate. The experimentally degraded dye wastewater mainly contained benzoic acid and its derivatives in addition to dye molecules, thus the degradation mechanism of benzoic acid was mainly analyzed. Then, the actual dye wastewater treated by low-temperature plasma was combined with the traditional biological treatment technology. The biochemical properties of the wastewater treated by low-temperature plasma technology were greatly improved, and the B/C was increased from the initial 0.17 to 0.33. The effluent after the combined biological method could meet the effluent discharge standard, and the final CODcr reached 198 mg/L, BOD₅ reached 65 mg/L, and pH and chromaticity reached 6.39 and 50, respectively.

Bioremediation of reactive orange 16 by industrial effluent-adapted bacterial consortium VITPBC6: process optimization using response surface methodology (RSM), enzyme kinetics, pathway elucidation, and detoxification

Textile effluent is one of the most hazardous industrial pollutant sources. It is generated in huge volumes and contains a wide array of toxicants. Reactive azo dyes, which are xenobiotic compounds, are predominantly utilized by textile industries for dyeing cotton, viscose, wool, and silk. The conventional physicochemical treatments used by industrial effluent treatment plants are ineffective in dye degradation. The present study thus attempted to find a potential treatment for reactive azo dyes. A novel bacterial consortium VITPBC6 was constructed with the most potent and compatible reactive orange 16 (RO-16) decolorizing isolates of tannery and textile effluents, and the isolates were identified as Bacillus flexus VITSP6, Bacillus paraflexus VITSPB7, Bacillus megaterium VITSPB9, Bacillus firmus VITEPB1, B. flexus VITEPB2, and Bacillus aryabhattai VITEPB3. The physicochemical factors of RO-16 decolorization were optimized by response surface methodology. Consortium VITPBC6 was able to tolerate a high concentration of RO-16 up to 800 mg L^-1. A cocktail of enzymes including azoreductase, tyrosinase, laccase, lignin peroxidase, and manganese peroxidase was involved in RO-16 degradation by VITPBC6. Consortium VITPBC6 degraded RO-16 following zero-order reaction. The enzymes of consortium VITPBC6 had a V_max of 352 mg L^-1 day^-1 for RO-16 degradation; however, the K_m value was high. VITPBC6 biodegraded RO-16 resulting in the formation of small aromatic compounds. Lastly, different toxicity assays conducted with untreated RO-16 and its corresponding biodegraded metabolite revealed that the toxicity of biodegraded metabolites was significantly lower than the untreated dye.

Fungal assisted bio-treatment of environmental pollutants with comprehensive emphasis on noxious heavy metals: Recent updates

In the present time of speedy developments and industrialization, heavy metals are being uncovered in aquatic environment and soil via refining, electroplating, processing, mining, metallurgical activities, dyeing and other several metallic and metal based industrial and synthetic activities. Heavy metals like lead (Pb), mercury (Hg), cadmium (Cd), arsenic (As), Zinc (Zn), Cobalt (Co), Iron (Fe), and many other are considered as seriously noxious and toxic for the aquatic environment, human, and other aquatic lives and have damaging influences. Such heavy metals, which are very tough to be degraded, can be managed by reducing their potential through various processes like removal, precipitation, oxidation-reduction, bio-sorption, recovery, bioaccumulation, bio-mineralization etc. Microbes are known as talented bio-agents for the heavy metals detoxification process and fungi are one of the cherished bio-sources that show noteworthy aptitude of heavy metal sorption and metal tolerance. Thus, the main objective of the authors was to come with a comprehensive review having methodological insights on the novel and recent results in the field of mycoremediation of heavy metals. This review significantly assesses the potential talent of fungi in heavy metal detoxification and thus, in environmental restoration. Many reported works, methodologies and mechanistic sights have been evaluated to explore the fungal-assisted heavy metal remediation. Herein, a compact and effectual discussion on the recent mycoremediation studies of organic pollutants like dyes, petroleum, pesticides, insecticides, herbicides, and pharmaceutical wastes have also been presented.

Biofilm-mediated decolorization, degradation and detoxification of synthetic effluent by novel biofilm-producing bacteria isolated from textile dyeing effluent

Biofilm-mediated bioremediation of xenobiotic pollutants is an environmental friendly biological technique. In this study, 36 out of 55 bacterial isolates developed biofilms in glass test tubes containing salt-optimized broth plus 2% glycerol (SOBG). Scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and Congo red- and Calcofluor binding results showed biofilm matrices contain proteins, curli, nanocellulose-rich polysaccharides, nucleic acids, lipids, and peptidoglycans. Several functional groups including -OH, N-H, C-H, CO, COO^-, -NH_2, PO, C-O, and C-C were also predicted. By sequencing, ten novel biofilm-producing bacteria (BPB) were identified, including Exiguobacterium indicum ES31G, Kurthia gibsonii ES43G, Kluyvera cryocrescens ES45G, Cedecea lapagei ES48G, Enterobacter wuhouensis ES49G, Aeromonas caviae ES50G, Lysinibacillus sphaericus ES51G, Acinetobacter haemolyticus ES52G, Enterobacter soli ES53G, and Comamonas aquatica ES54G. The Direct Red (DR) 28 (a carcinogenic and mutagenic dye used in dyeing and biomedical processes) decolorization process was optimized in selected bacterial isolates. Under optimum conditions (SOBG medium, 75 mg L^-1 dye, pH 7, 28 °C, microaerophilic condition and within 72 h of incubation), five of the bacteria tested could decolorize 97.8% ± 0.56-99.7% ± 0.45 of DR 28 dye. Azoreductase and laccase enzymes responsible for biodegradation were produced under the optimum condition. UV-Vis spectral analysis revealed that the azo (-NN-) bond peak at 476 nm had almost disappeared in all of the decolorized samples. FTIR data revealed that the foremost characteristic peaks had either partly or entirely vanished or were malformed or stretched. The chemical oxygen demand decreased by 83.3-91.3% in the decolorized samples, while plant probiotic bacterial growth was indistinguishable in the biodegraded metabolites and the original dye. Furthermore, seed germination (%) was higher in the biodegraded metabolites than the parent dye. Thus, examined BPB could provide potential solutions for the bioremediation of industrial dyes in wastewater.

Biodegradation of textile dye Rhodamine-B by Brevundimonas diminuta and screening of their breakdown metabolites

The carcinogenic Rhodamine-B dye is recalcitrant which could cause serious hazards to human beings. Degradation with the application of unique bacterial strain is a sustainable technique. The bioremediation technique showed great potential to degrade a variety of recalcitrant pollutants like dyes. In this study, Brevundimonas diminuta, was selected for the breakdown of toxic textile dye Rhodamine-B. This bacterium showed 90-95% of degradation at the optimum conditions like 10 mg L^-1 of concentration of dye, pH 7 and temperature of 30 °C. Further UV-Visible spectrophotometry, FT-IR spectral scan, GC-MS analysis depicted the breakdown products like Methyl 18-fluoro-octadec-9-enoate, Methyl 18-fluoro-octadec-9-enoate and d-Homo-24-nor-17-oxachola-20,22-diene-3,16-dione,7-(acetyloxy)-1, 23 tri-epoxy-4,4,8-trimethyl. The degradation was confirmed by the changes in the functional groups, change in molecular weight and charge to-mass ratio. These results suggested that this strain is a deserving organism for the degradation of dye compounds.

Biodegradation of Reactive Yellow-145 azo dye using bacterial consortium: A deterministic analysis based on degradable Metabolite, phytotoxicity and genotoxicity study

Azo dyes are used at larger-scale as coloring agent in the textile industry. It generates a huge amount of dye containing wastewater and its toxicity threatens all kinds of life and also impacts human beings. At present, more impetus is being given to the biological treatment of dye effluent because of its azoreductase enzyme action to break down azo bond which leads to decolorization and degradation of dye. Bacterial consortium of E. asburiae and E. cloacae (1:1 ratio) was used for degradation and decolorization of Reactive Yellow-145 (RY-145) dye. The optimization of dye concentration, temperature, pH, and media has been carried out to determine the conditions required for maximum degradation and decolorization. The mixed consortium (10%) has shown 98.78% decolorization of RY-145 dye under static condition at 500 mgL^-1 concentration, 35 °C and pH 7.0 at 12 h contact period. FTIR analysis showed formation of new functional groups in the treated dye, such as O-H stretch at 1361 cm^-1, C-H stretch at 890 cm^-1, N-H stretch at 1598 cm^-1 and aromatic C-H at 671 cm^-1 revealing degradation of dye. Biodegraded metabolites of RY-145 dye were identified through GC-MS analysis that includes 2-Cyclohexen-1-ol, 5-Nitroso-2, 4, 6-triaminopyrimidine, Octahydroquinoline-9-hydroxyperoxide, Tetramethyl-2-hexadecen-1-ol, 9-Octadecanoic acid, methyl ester and Hexadecanoic acid, methyl ester, respectively which have industrial applications. Cyclohexane was used in gasoline and adhesive while Octahydroquinoline-9-hydroxyperoxide and 5-Nitroso-2, 4, 6-triaminopyrimidine were used in manufacturing drugs. Tetramethyl-2-hexadecen-1-ol, 9-Octadecanoic acid, methyl ester and Hexadecanoic acid, methyl ester are antimicrobial and antioxidant. Phytotoxicity test also showed non-toxic effects of treated dye on germination of Cicer arietinum and Vigna radiata seeds. Similarly, genotoxicity study indicated less toxic effects of biodegraded dye products on Mitotic index (MI) and cell division of Allium cepa.

Genomic analysis uncovers laccase-coding genes and biosynthetic gene clusters encoding antimicrobial compounds in laccase-producing Acinetobacter baumannii

Laccases are multicopper oxidase family enzymes that can oxidize various substrates. In this study, we isolated laccase-producing Acinetobacter spp. from the environment, and one isolate of laccase-producing Acinetobacter baumannii, designated NI-65, was identified. The NI-65 strain exhibited constitutive production of extracellular laccase in a crude extract using 2,6-dimethoxyphenol as a substrate when supplemented with 2 mM CuSO₄. Whole-genome sequencing of the NI-65 strain revealed a genome size of 3.6 Mb with 3,471 protein-coding sequences. The phylogenetic analysis showed high similarity to the genome of A. baumannii NCIMB8209. Three laccase proteins, PcoA and CopA, that belong to bacterial CopA superfamilies, and LAC-AB, that belongs to the I-bacterial bilirubin oxidase superfamily, were identified. These proteins were encoded by three laccase-coding genes (pcoA, copA, and lac-AB). The lac-AB gene showed a sequence similar to that of polyphenol oxidase (PPO). Gene clusters encoding the catabolized compounds involved in the utilization of plant substances and secondary metabolite biosynthesis gene clusters encoding antimicrobial compounds were identified. This is the first report of whole-genome sequencing of laccase-producing A. baumannii, and the data from this study help to elucidate the genome of A. baumannii to facilitate its application in synthetic biology for enzyme production.

3-Aminopropyl-triethoxysilane-Functionalized Tannin-Rich Grape Biomass for the Adsorption of Methyl Orange Dye: Synthesis, Characterization, and the Adsorption Mechanism

A biomass amino silica-functionalized material was successfully prepared by a simple sol-gel method. 3-Aminopropyltriethoxysilane (APTES) was added to a tannin-rich grape residue to improve its physicochemical properties and enhance the adsorption performance. The APTES functionalization led to significant changes in the material's characteristics. The functionalized material was efficiently applied in the removal of methyl orange (MO) due to its unique characteristics, such as an abundance of functional groups on its surface. The adsorption process suggests that the electrostatic interactions were the main acting mechanism of the MO dye removal, although other interactions can also take place. The functionalized biomass achieved a very high MO dye maximum adsorption capacity (Q _max) of 361.8 mg g^-1. The temperature positively affected the MO removal, and the thermodynamic studies indicated that the adsorption of MO onto APTES-functionalized biomass was spontaneous and endothermic, and enthalpy is driven in the physisorption mode. The regeneration performance revealed that the APTES-functionalized biomass material could be easily recycled and reused by maintaining very good performance even after five cycles. The adsorbent material was also employed to treat two simulated dye house effluents, which showed 48% removal. At last, the APTES biomass-based material may find significant applications as a multifunctional adsorbent and can be used further to separate pollutants from wastewater.

Use of bacterial isolates in the treatment of textile dye wastewater: A review

The textile industry uses large amounts of dyes like reactive, azo, anthraquinone, and triphenylmethane to colour textiles. Dyes that are not used up during the colouration process usually end up in water bodies as waste leading to the pollution of the water bodies. This makes the industry to be one of the major contributors to water pollution in the world. Bacterial agents isolated from various sources like dye contaminated soil and textile wastewater have shown to have the ability to effectively decolourise and degrade these dye pollutants leading to improved water quality. This review discusses bacterial isolates that have been used successfully to degrade and decolourise textile dyes, their mode of dye removal as well as the factors that affect their dye degradation ability. It further looks at the latest wastewater treatment technologies that incorporate bacterial microorganisms to treat dye wastewater.

•

Bacterial isolates offer environmentally friendly solution to dye degradation.

•

Pure and mixed bacterial cultures can remove textile dyes in optimised conditions.

•

Dyes are removed through biosorption or biodegradation mechanisms.

•

Latest technologies provide more effective dye removal options.

Biological Mineralization of Methyl Orange by Pseudomonas aeruginosa

Due to its recalcitrant and carcinogenic nature, the presence of methyl orange (MO) in the environment is a serious threat to human and animal life and is also toxic to plants. MO being recalcitrant cannot be effectively reclaimed from industrial effluents through physical and chemical approaches. Biological methods on the other hand have the potential to degrade such dyes because of their compatibility with nature and low chances of adverse effects on the environment. Bacteria, due to their fast growth rate and capability of surviving in extreme environments can effectively be used for this purpose. In the current research study, Pseudomonas aeruginosa was isolated and characterized using 16rRNA from textile wastewater. In the preliminary tests it was found that Pseudomonas aeruginosa has the ability to degrade and mineralize methyl orange effectively. The physicochemical conditions were then optimized, in order to get maximum degradation of MO which was achieved at 37 °C, a pH of 7, a low salt concentration of 0.1 g/15 mL, a high carbon source of 0.6 g/15 mL, and 72 h experimental time. In a single set of experiments where all these optimum conditions were combined, 88.23% decolorization of the selected dye was achieved. At the end of the experimental cycle, the aliquots were homogenized and filtered. The filtrates were subjected to FTIR and GC-MS analysis where azo linkage breaking was confirmed from the FTIR spectra. The filtrates were then extracted with ethyl acetate and then passed through a silica gel column. On the basis of Rf value (TLC plates used) similar fraction were combined which were then subjected to NMR analysis. The compounds detected through GC-MS, peaks were not observed in proton and C-13 NMR. Instead, solvent and some impurity peaks were present, showing that complete mineralization of the dye had occurred due to the action of different bacterial enzymes such as azoreductase, peroxidases, and classes on MO. The prosed mechanism of complete mineralization is based on spectral data that needs to be verified by trapping the individual step products through the use of appropriate inhibitors of individual enzymes.

Biodegradation of Methylene Blue Using a Novel Lignin Peroxidase Enzyme Producing Bacteria, Named Bacillus sp. React3, as a Promising Candidate for Dye-Contaminated Wastewater Treatment

The emission of methylene blue (MB) from common industries causes risks to human health by making clean drinking water unavailable and hampering environmental safety. A biological approach offering a more cost-efficient and sustainable alternative solution has been studied and demonstrated to be significantly effective for the removal of MB using promising microbial isolates. Therefore, this study targeted bacterial candidates, namely Bacillus sp. React3, isolated from soil with the potential to decolorize MB. The phenogenic identification of strain React3 was performed by 16S rRNA sequencing, showing a similarity of 98.86% to Bacillus velezensis CR-502T. The ability of this bacterial strain to decolorize MB was proven through both the lignin peroxidase efficiency and accumulation in the biomass of the living cells. MB removal was determined by the reduction in the maximum absorption at a wavelength of 665 nm, which was observed to be up to 99.5% after 48 h of incubation. The optimal conditions for the MB degradation of strain React3 were pH 7, 35 °C, static, 4% inoculum, and 1000 mg/L of MB, with tryptone as a carbon source and yeast extract as a nitrogen source.

Microbial Degradation of Azo Dyes: Approaches and Prospects for a Hazard-Free Conversion by Microorganisms

Azo dyes have become a staple in various industries, as colors play an important role in consumer choices. However, these dyes pose various health and environmental risks. Although different wastewater treatments are available, the search for more eco-friendly options persists. Bioremediation utilizing microorganisms has been of great interest to researchers and industries, as the transition toward greener solutions has become more in demand through the years. This review tackles the health and environmental repercussions of azo dyes and its metabolites, available biological approaches to eliminate such dyes from the environment with a focus on the use of different microorganisms, enzymes that are involved in the degradation of azo dyes, and recent trends that could be applied for the treatment of azo dyes.

Synthesis and Characterization of an α-Fe2O3-Decorated g-C3N4 Heterostructure for the Photocatalytic Removal of MO

This study describes the preparation of graphitic carbon nitride (g-C₃N₄), hematite (α-Fe₂O₃), and their g-C₃N₄/α-Fe₂O₃ heterostructure for the photocatalytic removal of methyl orange (MO) under visible light illumination. The facile hydrothermal approach was utilized for the preparation of the nanomaterials. Powder X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), and Brunauer–Emmett–Teller (BET) were carried out to study the physiochemical and optoelectronic properties of all the synthesized photocatalysts. Based on the X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance (DRS) results, an energy level diagram vs. SHE was established. The acquired results indicated that the nanocomposite exhibited a type-II heterojunction and degraded the MO dye by 97%. The degradation ability of the nanocomposite was higher than that of pristine g-C₃N₄ (41%) and α-Fe₂O₃ (30%) photocatalysts under 300 min of light irradiation. The formation of a type-II heterostructure with desirable band alignment and band edge positions for efficient interfacial charge carrier separation along with a larger specific surface area was collectively responsible for the higher photocatalytic efficiency of the g-C₃N₄/α-Fe₂O₃ nanocomposite. The mechanism of the nanocomposite was also studied through results obtained from UV-vis and XPS analyses. A reactive species trapping experiment confirmed the involvement of the superoxide radical anion (O₂^•−) as the key reactive oxygen species for MO removal. The degradation kinetics were also monitored, and the reaction was observed to be pseudo-first order. Moreover, the sustainability of the photocatalyst was also investigated.

Enzymatic biodegradation, kinetic study, and detoxification of Reactive Red-195 by Halomonas meridiana isolated from Marine Sediments of Andaman Sea, India

Azo dyes are a significant class of hazardous chemicals that are extensively utilised in diverse industries. Industries that manufacture and consume reactive azo dyes generate hyper-saline wastewater. The ability of halotolerant bacteria to thrive under extreme environmental conditions thus makes them a potential candidate for reactive azo dye degradation. An efficient halotolerant bacterium (isolate SAIBP-6) with the capability to degrade 87.15% of azo dye Reactive Red 195 (RR-195) was isolated from sea sediment and identified as Halomonas meridiana SAIBP-6. Strain SAIBP-6 maintained potential decolourisation under a wide range of environmental conditions viz. 35-45°C temperature, 50-450 mg/L RR-195, pH 7-9, and 50-150 g/L NaCl. However, maximum decolourisation occurred at 40°C, 200 mg/L RR-195 dye, pH 9, and 50 g/L NaCl, under static conditions. Tyrosinase and azoreductase were responsible for dye degradation. The reaction catalysed by these enzymes followed zero-order kinetics. The maximum velocity (Vmax) of the enzymatic reaction was 4.221 mg/(L.h) and the Michaelis constant (Km) was 517.982 mg/L. Strain SAIBP-6 also efficiently decolourised Reactive Black-5 and Reactive Yellow-160 dye. The biodegradation process was further studied with the help of UV-Vis spectral scan, ultra-high performance liquid chromatography (UPLC), fourier-transform infra-red spectroscopy (FT-IR), and proton nuclear magnetic resonance (¹H NMR) analysis. Finally, cytogenotoxicity assay conducted with the meristematic root tip cells of Allium cepa and phytotoxicity assay conducted with the seeds of Vigna mungo led to the inference that strain SAIBP-6 significantly reduced the toxicity of RR-195 after biodegradation.

Methyl Orange Biodegradation by Immobilized Consortium Microspheres: Experimental Design Approach, Toxicity Study and Bioaugmentation Potential

Methyl orange (MO) is categorized among the recalcitrant and refractory xenobiotics, representing a significant burden in the ecosystem. To clean-up the surrounding environment, advances in microbial degradation have been made. The main objective of this study was to investigate the extent to which an autochthonous consortium immobilized in alginate beads can promote an efficient biodegradation of MO. By employing response surface methodology (RSM), a parametric model explained the interaction of immobilized consortium (Raoultella planticola, Ochrobactrum thiophenivorans, Bacillus flexus and Staphylococcus xylosus) to assimilate 200 mg/L of MO in the presence of 40 g/L of NaCl within 120 h. Physicochemical analysis, including UV-Vis spectroscopy and FTIR, and monitoring of the degrading enzymes (azoreductase, DCIP reductase, NADH reductase, laccase, LiP, MnP, nitrate reductase and tyrosinase) were used to evaluate MO degradation. In addition, the toxicity of MO-degradation products was investigated by means of phytotoxicity and cytotoxicity. Chlorella vulgaris retained its photosynthetic performance (>78%), as shown by the contents of chlorophyll-a, chlorophyll-b and carotenoids. The viability of normal lung and kidney cell lines was recorded to be 90.63% and 99.23%, respectively, upon exposure to MO-metabolic outcomes. These results reflect the non-toxicity of treated samples, implying their utilization in ferti-irrigation applications and industrial cooling systems. Moreover, the immobilized consortium was employed in the bioremediation of MO from artificially contaminated agricultural and industrial effluents, in augmented and non-augmented systems. Bacterial consortium remediated MO by 155 and 128.5 mg/L in augmented systems of agricultural and industrial effluents, respectively, within 144 h, revealing its mutual synergistic interaction with both indigenous microbiotas despite differences in their chemical, physical and microbial contents. These promising results encourage the application of immobilized consortium in bioaugmentation studies using different resources.

Statistical modeling of methylene blue degradation by yeast-bacteria consortium; optimization via agro-industrial waste, immobilization and application in real effluents

The progress in industrialization everyday life has led to the continuous entry of several anthropogenic compounds, including dyes, into surrounding ecosystem causing arduous concerns for human health and biosphere. Therefore, microbial degradation of dyes is considered an eco-efficient and cost-competitive alternative to physicochemical approaches. These degradative biosystems mainly depend on the utilization of nutritive co-substrates such as yeast extract peptone in conjunction with glucose. Herein, a synergestic interaction between strains of mixed-culture consortium consisting of Rhodotorula sp., Raoultella planticola; and Staphylococcus xylosus was recruited in methylene blue (MB) degradation using agro-industrial waste as an economic and nutritive co-substrate. Via statistical means such as Plackett-Burman design and central composite design, the impact of significant nutritional parameters on MB degradation was screened and optimized. Predictive modeling denoted that complete degradation of MB was achieved within 72 h at MB (200 mg/L), NaNO3 (0.525 gm/L), molasses (385 μL/L), pH (7.5) and inoculum size (18%). Assessment of degradative enzymes revealed that intracellular NADH-reductase and DCIP-reductase were key enzymes controlling degradation process by 104.52 ± 1.75 and 274.04 ± 3.37 IU/min/mg protein after 72 h of incubation. In addition, azoreductase, tyrosinase, laccase, nitrate reductase, MnP and LiP also contributed significantly to MB degradation process. Physicochemical monitoring analysis, namely UV-Visible spectrophotometry and FTIR of MB before treatment and degradation byproducts indicated deterioration of azo bond and demethylation. Moreover, the non-toxic nature of degradation byproducts was confirmed by phytotoxicity and cytotoxicity assays. Chlorella vulgaris retained its photosynthetic capability (˃ 85%) as estimated from Chlorophyll-a/b contents compared to ˃ 30% of MB-solution. However, the viability of Wi-38 and Vero cells was estimated to be 90.67% and 99.67%, respectively, upon exposure to MB-metabolites. Furthermore, an eminent employment of consortium either freely-suspended or immobilized in plain distilled water and optimized slurry in a bioaugmentation process was implemented to treat MB in artificially-contaminated municipal wastewater and industrial effluent. The results showed a corporative interaction between the consortium examined and co-existing microbiota; reflecting its compatibility and adaptability with different microbial niches in different effluents with various physicochemical contents.

Decolourisation and Biodegradation of Textile Di-azo Dye Congo Red by Chryseobacterium geocarposphaerae DD3

In the present study, Chryseobacterium geocarposphaerae DD3 isolated from textile industry dye effluent in West Bengal, India, displayed significant tolerance to sulfonated di-azo dye Congo red (CR), up to 500 ppm. The optimum decolourisation revealed that C. geocarposphaerae DD3 was capable of 96.52% decolourisation of 0.2 g L−1 CR within 12 h of treatment in the presence of 5 g L−1 glucose as supplementary carbon source. Biodegradation analysis of decolourised CR containing water was investigated by FTIR, MS and 1H NMR, which confirmed the absence of azo bond as well as the toxic aromatic amines. Further, phytotoxicity analysis was performed to assess the toxicity of CR before and after bacterial treatment. Growth indexes of Vigna radiata L. seed confirmed that the biodegraded water was non-phytotoxic in comparison to the control CR solution. Multivariate analyses confirmed the same, showing significant differences between measured plant health indicators for CR solutions, whereas no significant differences were found between distilled and treated water. This study is novel as it is the first report of dye degradation by C. geocarposphaerae and may lead to a sustainable way of treating dye-contaminated water in the near future.

Decolorization and degradation of reactive orange 16 by Bacillus stratosphericus SCA1007

Efficient bacterial strain was isolated from the dye contaminated area and identified as Bacillus stratosphericus SCA1007 based on 16S rRNA gene sequence (GenBank under accession number KY992944). This isolate was selected based on its potential to efficiently decolorize reactive orange 16 dye which is extensively used in textile industries. Various culture conditions like dye concentration, temperature, pH, salinity, and additional nitrogen source were optimized in the present study. The optimal conditions for decolorization of reactive orange 16 was found to be: dye concentration 150 mg/L, pH 7, temperature 35 °C, and yeast extract as nitrogen source. The isolate was also resistant to 4% saline culture condition. Decolorization and degradation of dye were confirmed through UV-visible spectroscopy, Fourier transform infrared (FTIR) and liquid chromatography-mass spectrometry analysis (LC-MS). Toxicity studies were performed on Escherichia coli and Vigna radiata to confirm the non-toxic nature of the degraded metabolites. This is the first study demonstrating complete decolorization of reactive orange 16 dye by Bacillus stratosphericus SCA1007 at high salinity within 10 h of incubation under optimized conditions.

Ferroin in dyes degradation by Fenton-like process: a chemical waste recycling perspective

Published literature describes the formation of the Fe (II)-phenanthroline complex (ferroin) as a stop way for Fenton processes, reducing radical yield. By contrast, this study presents evidence that ferroin can be activated by UVA in mildly acidic media in a photo-Fenton-like process. Because ferroin is the main waste from total iron determination in environmental samples, a recycling approach is suggested. Based on the best practices of waste management planning, an application of the proposed method for treating another chemical waste is presented. Titrimetric ammonia determination waste containing 2.67 mg L^-1 methyl red azo dye and 1.33 mg L^-1 methylene blue was degraded using the optimized experimental conditions: pH = 5.2-5.4; [H₂O₂] = 310 mg L^-1; [ferroin] = 1.4 mg L^-1; temperature = 36 ± 1 °C; reaction time = 165 min under UVA irradiation. Attenuation of most intense spectroscopic bands for the dyes achieved 94% (510 nm) and 96% (665 nm) reduction for methyl red and methylene blue, respectively, with degradation of ferroin itself. The present work brings empirical evidence that is possible to recycle ferroin as photo-Fenton-like process catalyst, as well as determine the best conditions for providing less acidic treated effluents with negligible suspended solid concentration, better than that obtained from classical photo-Fenton processes.

Expression of thermophilic two-domain laccase from Catenuloplanes japonicus in Escherichia coli and its activity against triarylmethane and azo dyes

BACKGROUND

Two-domain laccases are copper-containing oxidases found in bacteria in the beginning of 2000ths. Two-domain laccases are known for their thermal stability, wide substrate specificity and, the most important of all, their resistance to so-called «strong inhibitors» of classical fungal laccases (azides, fluorides). Low redox potential was found to be specific for all the two-domain laccases, due to which these enzymes lost the researchers' interest as potentially applicable for various biotechnological purposes, such as bioremediation. Searching, obtaining and studying the properties of novel two-domain laccases will help to obtain an enzyme with high redox-potential allowing its practical application.

METHODS

A gene encoding two-domain laccase was identified in Catenuloplanes japonicus genome, cloned and expressed in an Echerichia coli strain. The protein was purified to homogeneity by immobilized metal ion affinity chromatography. Its molecular properties were studied using electrophoresis in native and denaturing conditions. Physico-chemical properties, kinetic characteristics, substrate specificity and decolorization ability of laccase towards triphenylmethane dyes were measured spectrophotometrically.

RESULTS

A novel two-domain recombinant laccase CjSL appeared to be a multimer with a subunit molecular mass of 37 kDa. It oxidized a wide range of phenolic substrates (ferulic acid, caffeic acid, hydroquinone, catechol, etc.) at alkaline pH, while oxidizing of non phenolic substrates (K4[Fe(CN)6], ABTS) was optimal at acidic pH. The UV-visible absorption spectrum of the purified enzyme was specific for all two-domain laccases with peak of absorption at 600 nm and shoulder at 340 nm. The pH optima of CjSL for oxidation of ABTS and 2, 6-DMP substrates were 3.6 and 9.2 respectively. The temperature optimum was 70 °C. The enzyme was most stable in neutral-alkaline conditions. CjSL retained 53% activity after pre-incubation at 90 °C for 60 min. The enzyme retained 26% activity even after 60 min of boiling. The effects of NaF, NaN3, NaCl, EDTA and 1,10-phenanthroline on enzymatic activity were investigated. Only 1,10-phenanthroline reduced laccase activity under both acidic and alkaline conditions. Laccase was able to decolorize triphenylmethane dyes and azo-dyes. ABTS and syringaldehyde were effective mediators for decolorization. The efficacy of dye decolorization depended on pH of the reaction medium.

Biofilm Formation, Production of Matrix Compounds and Biosorption of Copper, Nickel and Lead by Different Bacterial Strains

Bacterial biofilms play a key role in metal biosorption from wastewater. Recently, Enterobacter asburiae ENSD102, Enterobacter ludwigii ENSH201, Vitreoscilla sp. ENSG301, Acinetobacter lwoffii ENSG302, and Bacillus thuringiensis ENSW401 were shown to form air–liquid (AL) and solid–air–liquid (SAL) biofilms in a static condition at 28 and 37°C, respectively. However, how environmental and nutritional conditions affect biofilm formation; production of curli and cellulose; and biosorption of copper (Cu), nickel (Ni), and lead (Pb) by these bacteria have not been studied yet. In this study, E. asburiae ENSD102, E. ludwigii ENSH201, and B. thuringiensis ENSW401 developed the SAL biofilms at pH 8, while E. asburiae ENSD102 and Vitreoscilla sp. ENSG301 constructed the SAL biofilms at pH 4. However, all these strains produced AL biofilms at pH 7. In high osmolarity and ½-strength media, all these bacteria built fragile AL biofilms, while none of these strains generated the biofilms in anaerobic conditions. Congo red binding results showed that both environmental cues and bacterial strains played a vital role in curli and cellulose production. Calcofluor binding and spectrophotometric results revealed that all these bacterial strains produced significantly lesser amounts of cellulose at 37°C, pH 8, and in high osmotic conditions as compared to the regular media, at 28°C, and pH 7. Metal biosorption was drastically reduced in these bacteria at 37°C than at 28°C. Only Vitreoscilla sp. ENSG301 and B. thuringiensis ENSW401 completely removed (100%) Cu and Ni at an initial concentration of 12.5 mg l^–1, while all these bacteria totally removed (100%) Pb at concentrations of 12.5 and 25 mg l^–1 at pH 7 and 28°C. At an initial concentration of 100 mg l^–1, the removal of Cu (92.5 to 97.8%) and Pb (89.3 to 98.3%) was the highest at pH 6, while it was higher (84.7 to 93.9%) for Ni at pH 7. Fourier transform infrared spectroscopy results showed metal-unloaded biomass biofilms contained amino, hydroxyl, carboxyl, carbonyl, and phosphate groups. The peak positions of these groups were shifted responding to Cu, Ni, and Pb, suggesting biosorption of metals. Thus, these bacterial strains could be utilized to remove Cu, Ni, and Pb from aquatic environment.

Study on the adsorption properties of methyl orange by natural one-dimensional nano-mineral materials with different structures

Methyl orange (MO) is a common anionic azo dye that is harmful to the environment and biology, so it must be treated innocuously before it can be discharged. Adsorption is an effective method to remove anionic dyes. Nanotube mineral is a natural one-dimensional adsorption material, and its unique morphology and structure endow it with good adsorption capacity. Although there are many related studies, there is a lack of in-depth discussions on the influence of nanotube's composition and structure on the adsorption of dyes and other pollutants. In this paper, two kinds of natural one-dimensional silicate minerals [halloysite nanotubes (HNTs) and chrysotile nanotubes (ChNTs)] with similar morphology but slightly different compositions and crystal structures were used as adsorbents, and MO solution was used as simulate pollutants. It is the first time to discuss in depth the influence of the composition and structure of nanotube minerals on their charge properties and the adsorption performance of methyl orange dyes. It is found that HNTs and ChNTs have different adsorption capacity due to the difference of electronegativity between Al³⁺ and Mg²⁺ in the crystal, so they possess negative and positive charges respectively in near-neutral solution, which leads to the adsorption capacity of MO by ChNTs with positive charges which is greater than that of HNTs.

Cloning, Overexpression, and Characterization of a Thermostable, Organic Solvent-Tolerant Laccase from Bacillus pumilus ARA and Its Application to Dye Decolorization

A thermostable and organic solvent-tolerant bacterial laccase from Bacillus pumilus ARA has been expressed heterologously and characterized, which shows potential decolorization capacity to various types of industrial synthetic dyes. The optimal temperature and pH were 85 °C and 3.5, respectively, while the purified recombinant laccase B.P.Lacc was stable under 55-75 °C and pH 5.0-8.0 conditions. The apparent kinetic parameters K m and V max of B.P.Lacc for ABTS as the substrate were 0.33 mM and 32.4 U/mg, respectively. Ethanol (1%, v/v) and methanol (2%, v/v) could stimulate the enzyme activity. The recombinant laccase retained over 95% of its initial activity in 10% (v/v) methanol. The optimal expression conditions for the laccase production of B.P.Lacc in LB medium were obtained: induction temperature of 25 °C, 0.4 mM Cu2+, and 1.0 mM IPTG added into the culture. After 5 h, the final laccase production was 1283 U/mL. Moreover, the laccase activity increased to 4822 U/mL after follow-up 2 h stationary cultivation, with about a 3.76-fold increase. The purified B.P.Lacc was able to efficiently decolorize synthetic dyes combined with mediators. Adding 1.0 mM ABTS, more than 90% of BRRB was decolorized by the enzyme, whether at pH 4.0 or pH 7.9. The outstanding enzymatic properties suggested that B.P.Lacc may be suitable for a wide application in future biodegradation fields.