Recent advances in cholesterol chemistry

A Sensitive Enzymatic Electrochemical Biosensor for Cholesterol Based on Cobalt Ferrite@Molybdenum Disulfide/Gold Nanoparticles

Cholesterol is essential in biological systems, and the level of cholesterol in the body of a person acts as a diagnostic marker for a variety of diseases. So, in this work, we fabricated an enzymatic electrochemical biosensor for cholesterol using cobalt ferrite@molybdenum disulfide/gold nanoparticles (CoFe2O4@MoS2/Au). The synthesized composite was used for the determination of cholesterol by voltametric methods. The electroactive material CoFe2O4@MoS2/Au was successfully verified from the physiochemical studies such as XRD, Raman, FT-IR, and XPS spectroscopy along with morphological FESEM and HRTEM characterization. CoFe2O4@MoS2/Au showed outstanding dispersion in the aqueous phase, a large effective area, good biological compatibility, and superior electronic conductivity. The microflower-like CoFe2O4@MoS2/Au was confirmed by scanning electron microscopy. The image of transmission electron microscopy showed decoration of gold nanoparticles on CoFe2O4@MoS2 surfaces. Furthermore, a one-step dip-coating technique was used to build the biosensor used for cholesterol detection. In addition to acting as an enabling matrix to immobilize cholesterol oxidase (ChOx), CoFe2O4@MoS2/Au contributes to an increase in electrical conductivity. The differential pulse voltammetry method was used for the quantitative measurement of cholesterol. The calibration curve for cholesterol was linear in the concentration range of 5 to 100 μM, with a low limit of detection of 0.09 μM and sensitivity of 0.194 μA μM-1 cm-2. Furthermore, the biosensor demonstrates good practicability, as it was also employed for identifying cholesterol in real samples with acceptable selectivity and stability.

Development and validation of a deep eutectic solvent-assisted liquid-liquid extraction method for simultaneous quantification of six steroid hormones in serum by liquid chromatography-tandem mass spectrometry

Steroid hormones have been reported to be associated with endocrine system diseases. This paper proposes a novel procedure of deep eutectic solvent (DES)-assisted liquid-liquid extraction (LLE) to extract six steroid hormones (including cortisone, cortisol, androstenedione, testosterone, 17-hydroxyprogesterone, and progesterone) from serum coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS). A total of five types of L-proline, choline chloride, and citric acid-based DESs were tailored; the DES from L-proline and ethylene glycol at a molar ratio of 1:4 with 20 % acetonitrile was selected as the best-fit assisted solvent for the six steroid hormones compared with other DESs. The parameters for extraction by selected DES were optimized using Box-Behnken design (BBD), and the optimal extraction conditions are 200 µL of acetonitrile, 100 µL of the sample, and 80 µL of DES. Under optimum conditions, the method has good linear calibration ranges (between 0.07 ng mL-1 and 600 ng mL-1), correlation coefficients of determination (r2>0.99), and low limits of quantification (between 0.02 and 0.60 ng mL-1). The extraction recoveries were in the range of 81.84-114.43 %, and the intra-day and inter-day relative standard deviations (RSDs) were less than 10 %.In general, the DES-LC-MS/MS method is a simple and environmentally-friendly method, which can be complementary to the presently available methods for determining steroid hormones in serum.

Steroids Bearing Heteroatom as Potential Drugs for Medicine

Heteroatom steroids, a diverse class of organic compounds, have attracted significant attention in the field of medicinal chemistry and drug discovery. The biological profiles of heteroatom steroids are of considerable interest to chemists, biologists, pharmacologists, and the pharmaceutical industry. These compounds have shown promise as potential therapeutic agents in the treatment of various diseases, such as cancer, infectious diseases, cardiovascular disorders, and neurodegenerative conditions. Moreover, the incorporation of heteroatoms has led to the development of targeted drug delivery systems, prodrugs, and other innovative pharmaceutical approaches. Heteroatom steroids represent a fascinating area of research, bridging the fields of organic chemistry, medicinal chemistry, and pharmacology. The exploration of their chemical diversity and biological activities holds promise for the discovery of novel drug candidates and the development of more effective and targeted treatments.

Revisiting the bromination of 3β-hydroxycholest-5-ene with CBr4/PPh3 and the subsequent azidolysis of the resulting bromide, disparity in stereochemical behavior

Cholesterol reacts under Appel conditions (CBr4/PPh3) to give 3,5-cholestadiene (elimination) and 3β-bromocholest-5-ene (substitution with retention of configuration). Thus, the bromination of cholesterol deviates from the stereochemistry of the standard Appel mechanism due to participation of the Δ5 π-electrons. In contrast, the subsequent azidolysis (NaN3/DMF) of 3β-bromocholest-5-ene proceeds predominantly by Walden inversion (SN2) affording 3α-azidocholest-5-ene. The structures of all relevant products were revealed by X-ray single crystal structure analyses, and the NMR data are in agreement to the reported ones. In light of these findings, we herein correct the previous stereochemical assignments reported by one of us in the Beilstein J. Org. Chem. 2015, 11, 1922-1932 and the Monatsh. Chem. 2018, 149, 505-517.

Concise synthesis of E/F ring spiroethers from tigogenin. Carbaanalogs of steroidal sapogenins and their biological activity

A four-step synthesis of five- and six-membered E/F ring spiroethers from tigogenin has been developed. An efficient strategy that features bis-Grignard reaction of dinorcholanic lactone with appropriate bis(bromomagnesio)alkanes followed by acid-mediated spirocyclization was employed to construct a new class of steroid compounds having E and F ring junction as an oxa-carbacyclic system. The synthesized carbaanalogs interact with liposomes and albumin, and also exhibit antibacterial and antifungal activity, demonstrating their pharmacological potential.

Ultrasensitive electrochemical biosensors for dopamine and cholesterol: recent advances, challenges and strategies

The rapid and accurate determination of the dopamine (neurotransmitter) and cholesterol level in bio-fluids is significant because they are crucial bioanalytes for several lethal diseases, which require early diagnosis. The level of DA in the brain is modulated by the dopamine active transporter (DAT), and is influenced by cholesterol levels in the lipid membrane environment. Accordingly, electrochemical biosensors offer rapid and accurate detection and exhibit unique features such as low detection limits even with reduced volumes of analyte, affordability, simple handling, portability and versatility, making them appropriate to deal with augmented challenges in current clinical and point-of-care diagnostics for the determination of dopamine (DA) and cholesterol. This feature article focuses on the development of ultrasensitive electrochemical biosensors for the detection of cholesterol and DA for real-time and onsite applications that can detect targeted analytes with reduced volumes and sub-picomolar concentrations with quick response times. Furthermore, the development of ultrasensitive biosensors via cost-effective, simple fabrication procedures, displaying high sensitivity, selectivity, reliability and good stability is significant in the impending era of electrochemical biosensing. Herein, we emphasize on recent advanced nanomaterials used for the ultrasensitive detection of DA and cholesterol and discuss in depth their electrochemical activities towards ultrasensitive responses. Key points describing future perspectives and the challenges during detection with their probable solutions are discussed, and the current market is also surveyed. Further, a comprehensive review of the literature indicates that there is room for improvement in the miniaturization of cholesterol and dopamine biosensors for lab-on-chip devices and overcoming the current technical limitations to facilitate full utilization by patients at home.

Pathological Crosstalk Between Oxidized LDL and ER Stress in Human Diseases: A Comprehensive Review

The oxidative modification of the major cholesterol carrying lipoprotein, oxLDL, is a biomarker as well as a pathological factor in cardiovascular diseases (CVD), type 2 diabetes mellitus (T2DM), obesity and other metabolic diseases. Perturbed cellular homeostasis due to physiological, pathological and pharmacological factors hinder the proper functioning of the endoplasmic reticulum (ER), which is the major hub for protein folding and processing, lipid biosynthesis and calcium storage, thereby leading to ER stress. The cellular response to ER stress is marked by a defensive mechanism called unfolded protein response (UPR), wherein the cell adapts strategies that favor survival. Under conditions of excessive ER stress, when the survival mechanisms fail to restore balance, UPR switches to apoptosis and eliminates the defective cells. ER stress is a major hallmark in metabolic syndromes such as diabetes, non-alcoholic fatty liver disease (NAFLD), neurological and cardiovascular diseases. Though the pathological link between oxLDL and ER stress in cardiovascular diseases is well-documented, its involvement in other diseases is still largely unexplored. This review provides a deep insight into the common mechanisms in the pathogenicity of diseases involving oxLDL and ER stress as key players. In addition, the potential therapeutic intervention of the targets implicated in the pathogenic processes are also explored.

Polymeric Drug Delivery Systems Bearing Cholesterol Moieties: A Review

This review aims to provide an overview of polymers comprising cholesterol moiety/ies designed to be used in drug delivery. Over the last two decades, there have been many papers published in this field, which are summarized in this review. The primary focus of this article is on the methods of synthesis of polymers bearing cholesterol in the main chain or as side chains. The data related to the composition, molecular weight, and molecular weight distribution of polymers are presented. Moreover, other aspects, such as forms of carriers, types of encapsulated drugs, encapsulation efficiency and capacity, are also included.

Quantification of Cooking Method Effect on COP Content in Meat Types Using Triple Quadrupole GC-MS/MS

A diet containing cholesterol is an essential component of biological function; however, cholesterol oxidation products (COPs) remain a major public health concern. This study investigated the effects of cooking methods (boiling and frying) on the production levels of COPs in processed foods. Samples, as represented by minced beef, chicken sausages, and fish fillets, were subjected to different cooking methods followed by COP extraction using a saponification method. Then, six common COPs, 5α-cholest, α-epoxy, β-epoxy, 25-HC, triol, and 7-keto, were quantified by triple quadrupole gas chromatography-mass spectrometry (GS-MS/MS). A significantly high number of COPs were detected in minced meat, of which 7-keto and triol were detected as major oxidation products, followed by chicken sausages and fish fillets (p ≤ 0.05). Compared to boiling, frying generated significantly more COPs, specifically triol (0.001-0.004 mg/kg) and 7-keto (0.001-0.200 mg/kg), in all samples. Interestingly, cholesterol level was found to be slightly (but not significantly) decreased in heat-treated samples due to oxidation during cooking, producing a higher number of COPs. Notably, the fish fillets were found to produce the fewest COPs due to the presence of a low amount of cholesterol and unsaturated fatty acids. In conclusion, adapting boiling as a way of cooking and choosing the right type of meat could serve to reduce COPs in processed foods.

Evaluation of Cytotoxic Effect of Cholesterol End-Capped Poly(N-Isopropylacrylamide)s on Selected Normal and Neoplastic Cells

Purpose

Efficient intracellular delivery of a therapeutic compound is an important feature of smart drug delivery systems (SDDS). Modification of a carrier structure with a cell-penetrating ligand, ie, cholesterol moiety, is a strategy to improve cellular uptake. Cholesterol end-capped poly(N-isopropylacrylamide)s offer a promising foundation for the design of efficient thermoresponsive drug delivery systems.

Methods

A series of cholesterol end-capped poly(N-isopropylacrylamide)s (PNIPAAm) with number-average molar masses ranging from 3200 to 11000 g·mol^–1 were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization from original xanthate-functionalized cholesterol and self-assembled into micelles. The physicochemical characteristics and cytotoxicity of cholesterol end-capped poly(N-isopropylacrylamide)s have been thoroughly investigated.

Results

Phase transition temperature dependence on the molecular weight and hydrophilic/hydrophobic ratio in the polymers were observed in water. Biological test results showed that the obtained materials, both in disordered and micellar form, are non-hemolytic, highly compatible with fibroblasts, and toxic to glioblastoma cells. It was found that the polymer termini dictates the mode of action of the system.

Conclusion

The cholesteryl moiety acts as a cell-penetrating agent, which enables disruption of the plasma membrane and in effect leads to the restriction of the tumor growth. Cholesterol end-capped PNIPAAm showing in vitro anticancer efficacy can be developed not only as drug carriers but also as components of combined/synergistic therapy.

Cholesterol oxidase immobilized inulin based nanocomposite as the sensing material for cholesterol in biological and food samples

In the present study, inulin based nanocomposite viz., TiO₂-MWCNT@Inulin was prepared by embedding Inulin (a biopolymer extracted from Allium sativum L.) with TiO₂ and MWCNTs. The morphology of the prepared nanocomposite was characterized by High Resolution transmission electron microscopy (HRTEM). Cholesterol oxidase (ChOx) enzyme was then immobilized into the nanocomposite and the immobilization was examined by UV-vis and FT-IR spectral studies. The ChOx immobilized nanocomposite was integrated into carbon paste (CP) matrix to prepare the working electrode for the sensing of cholesterol. Electrochemical characterization of the modified CP/TiO₂-MWCNT@Inulin/ChOx electrode was done by cyclic voltammetric (CV) and electrochemical impedance spectroscopic (EIS) studies. Differential pulse voltammetric (DPV) studies were carried out to determine the concentration of cholesterol at the interface of the newly fabricated electrode. The fabricated electrode demonstrated a linear range from 83 μM to 14.28 mM, low limit of detection (35 μM), good sensitivity (21.26 μA mM^-1  cm^-2), low K_m (0.49 mM), high stability (120 days) and good selectivity. The presence of Inulin biopolymer played a vital role in attaching ChOx enzyme firmly to the nanocomposite thereby enhancing the stability and electron transfer efficiency of the electrode. The analysis of product that was formed within the electrochemical cell during the electrochemical oxidation of cholesterol was performed by using sodium nitroprusside. This resulted in a deep purple coloured solution which suggested the electrochemical conversion of cholesterol to cholestenone. The practical applicability of the fabricated electrode was also assessed by the determination of cholesterol in spiked blood serum and milk samples.

Synthesis of steroidal 1,2- and 1,3-diamines as ligands for transition metal ion complexation

Two series of cholestane-based diamines (1,2 and 1,3) were synthesized using simple and efficient procedures. The convenient substrates for these syntheses were cholesteryl mesylate and tosylate, which were converted to appropriate amines via easily obtained azides. The final diamines were prepared using a substitution reaction with bromoacetonitrile (in the case of 1,2-diamines) or condensation with acrylonitrile (in the case of 1,3-diamines), followed by the reduction of intermediate aminonitriles. Furthermore, the other two amines were synthesized from 16-dehydropregnenolone acetate using aza-Michael addition as a key step. Some of the diamines were subjected to complexation reactions with K₂PtCl₄ to form steroidal analogs of cisplatin. The synthetic methods tested in this work will allow us to prepare other cisplatin derivatives based on steroids showing anticancer properties themselves.

Recent developments in the construction of metallacycle/metallacage-cored supramolecular polymers via hierarchical self-assembly

Supramolecular polymers have received considerable attention during the last few decades due to their scientific value in polymer chemistry and profound implications for future developments of advanced materials. Discrete supramolecular coordination complexes (SCCs) with well-defined size, shape, and geometry have been widely employed to construct hierarchical systems by coordination-driven self-assembly with the spontaneous formation of metal-ligand bonds, which results in the formation of well-defined two-dimensional (2D) metallacycles or three-dimensional (3D) metallacages with high functionalities. The incorporation of discrete SCCs into supramolecular polymers by the orthogonal combination of metal-ligand coordination and other noncovalent interactions or covalent bonding could further facilitate the construction of novel supramolecular polymers with hierarchical architectures and multiple functions including controllable uptake and release of guest molecules, providing a flexible platform for the development of smart materials. In this review, the recent progress in metallacycle/metallacage-cored supramolecular polymers that were constructed by the combination of metal-ligand interactions and other orthogonal interactions (including hydrophobic or hydrophilic interactions, hydrogen bonding, van der Waals forces, π-π stacking, electrostatic interactions, host-guest interactions and covalent bonding) has been discussed. In addition, the potential applications of metallacycle/metallacage-cored supramolecular polymers in the areas of light emitting, sensing, bio-imaging, delivery and release, etc., are also presented.

Cholesterol-Based Compounds: Recent Advances in Synthesis and Applications

This review reports on the latest developments (since 2014) in the chemistry of cholesterol and its applications in different research fields. These applications range from drug delivery or bioimaging applications to cholesterol-based liquid crystals and gelators. A brief overview of the most recent synthetic procedures to obtain new cholesterol derivatives is also provided, as well as the latest anticancer, antimicrobial, and antioxidant new cholesterol-based derivatives. This review discusses not only the synthetic details of the preparation of new cholesterol derivatives or conjugates, but also gives a short summary concerning the specific application of such compounds.

Sensitive determination of cholesterol and its metabolic steroid hormones by UHPLC-MS/MS via derivatization coupled with dual ultrasonic-assisted dispersive liquid-liquid microextraction

RATIONALE

Quantitative analysis of cholesterol and its metabolic steroid hormones plays a vital role in diagnosing endocrine disorders and understanding disease progression, as well as in clinical medicine studies. Because of their extremely low abundance in body fluids, it remains a challenging task to develop a sensitive detection method.

METHODS

A hyphenated technique of dual ultrasonic-assisted dispersive liquid-liquid microextraction (dual-UADLLME) coupled with microwave-assisted derivatization (MAD) was proposed for cleansing, enrichment and sensitivity enhancement. 4'-Carboxy-substituted rosamine (CSR) was synthesized and used as derivatization reagent. An ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method was developed for determination of cholesterol and its metabolic steroid hormones in the multiple reaction monitoring mode.

RESULTS

Parameters of dual-UADLLME, MAD and UHPLC-MS/MS were all optimized. Satisfactory linearity, recovery, repeatability, accuracy and precision, absence of matrix effect and extremely low limits of detection (LODs, 0.08-0.15 pg mL(-1) ) were achieved.

CONCLUSIONS

Through the combination of dual-UADLLME and MAD, a determination method for cholesterol and its metabolic steroid hormones in human plasma, serum and urine samples was developed and validated with high sensitivity, selectivity, accuracy and perfect matrix effect results. Copyright © 2016 John Wiley & Sons, Ltd.

Catalytic cyclometallation in steroid chemistry IV: Efficient method for the synthesis of tetrahydrothiophene, tetrahydroselenophen and cyclopentanone derivatives of (5α)-cholestane

Catalytic cycloalumination of (3β,5α)-3-vinylcholestane and (3α,5α)-3-allylcholestane with Et3Al catalyzed by Cp2ZrCl2 was performed for the first time to give previously unknown aluminacyclopentanes in ∼90% yield; these products were converted in situ to carbo- and heterocyclic (5α)-cholestane derivatives.

Transformable nanostructures of cholesteryl-containing rhomboidal metallacycles through hierarchical self-assembly

Various interesting nanostructures such as flowers and tadpole shaped structures were successfully obtained from well-defined cholesteryl-containing rhomboidal metallacycles prepared by coordination-driven self-assembly.

Cholesterol Oxidation in Fish and Fish Products

Fish and fish products are important from a nutritional point of view due to the presence of high biological value proteins and the high content of polyunsaturated fatty acids, especially those of the n-3 series, and above all eicosapentaenoic acid and docosahexaenoic acid. However, these important food products also contain significant amounts of cholesterol. Although cholesterol participates in essential functions in the human body, it is unstable, especially in the presence of light, oxygen, radiation, and high temperatures that can cause the formation of cholesterol oxidation products or cholesterol oxides, which are prejudicial to human health. Fish processing involves high and low temperatures, as well as other methods for microbiological control, which increases shelf life and consequently added value; however, such processes favor the formation of cholesterol oxidation products. This review brings together data on the formation of cholesterol oxides during the preparation and processing of fish into food products which are recognized and recommended for their nutritional properties.

Electrochemical oxidation of cholesterol

Indirect cholesterol electrochemical oxidation in the presence of various mediators leads to electrophilic addition to the double bond, oxidation at the allylic position, oxidation of the hydroxy group, or functionalization of the side chain. Recent studies have proven that direct electrochemical oxidation of cholesterol is also possible and affords different products depending on the reaction conditions.