Simple glycolipids of microbes: Chemistry, biological activity and metabolic engineering

Enzymes and biosurfactants of industrial interest produced by culturable fungi present in sediments of Boeckella Lake, Hope Bay, north-east Antarctic Peninsula

This study characterized cultivable fungi present in sediments obtained from Boeckella Lake, Hope Bay, in the north-east of the Antarctic Peninsula, and evaluated their production of enzymes and biosurfactants of potential industrial interest. A total of 116 fungal isolates were obtained, which were classified into 16 genera within the phyla Ascomycota, Basidiomycota and Mortierellomycota, in rank. The most abundant genera of filamentous fungi included Pseudogymnoascus, Pseudeurotium and Antarctomyces; for yeasts, Thelebolales and Naganishia taxa were dominant. Overall, the lake sediments exhibited high fungal diversity and moderate richness and dominance. The enzymes esterase, cellulase and protease were the most abundantly produced by these fungi. Ramgea cf. ozimecii, Holtermanniella wattica, Leucosporidium creatinivorum, Leucosporidium sp., Mrakia blollopis, Naganishia sp. and Phenoliferia sp. displayed enzymatic index > 2. Fourteen isolates of filamentous fungi demonstrated an Emulsification Index 24% (EI24%) ≥ 50%; among them, three isolates of A. psychrotrophicus showed an EI24% > 80%. Boeckella Lake itself is in the process of drying out due to the impact of regional climate change, and may be lost completely in approaching decades, therefore hosts a threatened community of cultivable fungi that produce important biomolecules with potential application in biotechnological processes.

A novel glycoglycerolipid from Holotrichia diomphalia Bates: Structure characteristics and protective effect against DNA damage

A lipidated polysaccharide, HDPS-2II, was isolated from the dried larva of Holotrichia diomphalia, which is used in traditional Chinese medicine. The molecular weight of HDPS-2II was 5.9 kDa, which contained a polysaccharide backbone of →4)-β-Manp-(1 → 4,6)-β-Manp-(1 → [6)-α-Glcp-(1]n → 6)-α-Glcp→ with the side chain α-Glcp-(6 → 1)-α-Glcp-(6 → linked to the C-4 of β-1,4,6-Manp and four types of lipid chains including 4-(4-methyl-2-(methylamino)pentanamido)pentanoic acid, 5-(3-(tert-butyl)phenoxy)hexan-2-ol, N-(3-methyl-5-oxopentan-2-yl)palmitamide, and N-(5-amino-3-methyl-5-oxopentan-2-yl)stearamide. The lipid chains were linked to C-1 of terminal α-1,6-Glcp in carbohydrate chain through diacyl-glycerol. HDPS-2II exhibited DNA protective effects and antioxidative activity on H2O2- or adriamycin (ADM)-induced Chinese hamster lung cells. Furthermore, HDPS-2II significantly ameliorated chromosome aberrations and the accumulation of reactive oxygen species (ROS), reduced γ-H2AX signaling and the expressions of NADPH oxidase (NOX)2, NOX4, P22phox, and P47phox in ADM-induced cardiomyocytes. Mechanistically, HDPS-2II suppressed ADM-induced up-regulation of NOX2 and NOX4 in cardiomyocytes, but not in NOX2 or NOX4 knocked-down cardiomyocytes, indicating that HDPS-2II could relieve intracellular DNA damage by regulating NOX2/NOX4 signaling. These findings demonstrate that HDPS-2II is a new potential DNA protective agent.

The Physicochemical and Functional Properties of Biosurfactants: A Review

Surfactants, also known as surface-active agents, have emerged as an important class of compounds with a wide range of applications. However, the use of chemical-derived surfactants must be restricted due to their potential adverse impact on the ecosystem and the health of human and other living organisms. In the past few years, there has been a growing inclination towards natural-derived alternatives, particularly microbial surfactants, as substitutes for synthetic or chemical-based counterparts. Microbial biosurfactants are abundantly found in bacterial species, predominantly Bacillus spp. and Pseudomonas spp. The chemical structures of biosurfactants involve the complexation of lipids with carbohydrates (glycolipoproteins and glycolipids), peptides (lipopeptides), and phosphates (phospholipids). Lipopeptides, in particular, have been the subject of extensive research due to their versatile properties, including emulsifying, antimicrobial, anticancer, and anti-inflammatory properties. This review provides an update on research progress in the classification of surfactants. Furthermore, it explores various bacterial biosurfactants and their functionalities, along with their advantages over synthetic surfactants. Finally, the potential applications of these biosurfactants in many industries and insights into future research directions are discussed.

Three strategy rules of filamentous fungi in hydrocarbon remediation: an overview

Remediation of hydrocarbon contaminations requires much attention nowadays since it causes detrimental effects on land and even worse impacts on aquatic environments. Tools of bioremediation especially filamentous fungi permissible for cleaning up as much as conceivable, at least they turn into non-toxic residues with less consumed periods. Inorganic chemicals, CO2, H2O, and cell biomass are produced as a result of the breakdown and mineralization of petroleum hydrocarbon pollutants. This paper presents a detailed overview of three strategic rules of filamentous fungi in remediating the various aliphatic, and aromatic hydrocarbon compounds: utilizing carbons from hydrocarbons as sole energy, Co-metabolism manners (Enzymatic and Non-enzymatic theories), and Biosorption approaches. Upliftment in the degradation rate of complex hydrocarbon by the Filamentous Fungi in consortia scenario we can say, "Fungal Talk", which includes a variety of cellular mechanisms, including biosurfactant production, biomineralization, and precipitation, etc., This review not only displays its efficiency but showcases the field applications - cost-effective, reliable, eco-friendly, easy to culture as biomass, applicable in both land and any water bodies in operational environment cleanups. Nevertheless, the potentiality of fungi-human interaction has not been fully understood, henceforth further studies are highly endorsed with spore pathogenicity of the fungal species capable of high remediation rate, and the gene knockout study, if the specific peptides cause toxicity to any living matters via Genomics and Proteomics approaches, before application of any in situ or ex situ environments.

Unlocking the potential of biosurfactants: Production, applications, market challenges, and opportunities for agro-industrial waste valorization

Biosurfactants are eco-friendly compounds with unique properties and promising potential as sustainable alternatives to chemical surfactants. The current review explores the multifaceted nature of biosurfactant production and applications, highlighting key fermentative parameters and microorganisms able to convert carbon-containing sources into biosurfactants. A spotlight is given on biosurfactants' obstacles in the global market, focusing on production costs and the challenges of large-scale synthesis. Innovative approaches to valorizing agro-industrial waste were discussed, documenting the utilization of lignocellulosic waste, food waste, oily waste, and agro-industrial wastewater in the segment. This strategy strongly contributes to large-scale, cost-effective, and environmentally friendly biosurfactant production, while the recent advances in waste valorization pave the way for a sustainable society.

Structural characterization of a nonionic rhamnolipid from Burkholderia lata

We present the isolation and structural characterization of a novel nonionic dirhamnolipid methyl ester produced by the bacterium Burkholderia lata. The structure and the absolute configuration of the isolated dirhamnolipid bearing a symmetrical C14-C14 methyl ester chain were thoroughly investigated through chemical degradation and spectroscopic methods including 1D and 2D NMR analysis, HR-ESI-TOF-MS, chiral GC-MS, and polarimetry. Our work represents the first mention in the literature of a rhamnolipid methyl ester from Burkholderia species.

Extracellular oil production by Rhodotorula paludigena BS15 for biorefinery without complex downstream processes

To realize biomass refinery without complex downstream processes, we extensively screened for microbial strains that efficiently produce extracellular oil from sugars. Rhodotorula paludigena (formerly Rhodosporidium paludigenum) BS15 was found to efficiently produce polyol esters of fatty acids (PEFAs), which mainly comprised of 3-acetoxypalmitic acid and partially acetylated mannitol/arabinitol. To evaluate the performance of this strain, fed-batch fermentation was demonstrated on a flask scale, and 110 g/L PEFA and 103 g/L dry cells were produced in 12 days. To the best of our knowledge, the strain BS15 exhibited the highest PEFA titer (g/L) ever to be reported so far. Because the PEFA precipitated at the bottom of the culture broth, it could be easily recovered by simply discarding the upper phase. Various carbon sources can be utilized for cell growth and/or PEFA production, which signifies the potential for converting diverse biomass sources. Two different types of next-generation sequencers, Illumina HiSeq and Oxford Nanopore PromethION, were used to analyze the whole-genome sequence of the strain BS15. The integrative data analysis generated a high-quality and reliable reference genome for PEFA-producing R. paludigena. The 22.5-M base genome sequence and the estimated genes were registered in Genbank (accession numbers BQKY01000001-BQKY01000019). KEY POINTS: • R. paludigena BS15 was isolated after an extensive screening of extracellular oil producers from natural sources. • Fed-batch fermentation of R. paludigena BS15 yielded 110 g/L of PEFA, which is the highest titer ever reported to date. • Combined analysis using Illumina and Oxford Nanopore sequencers produced the near-complete genome sequence.

Synergistic antifungal activity and potential mechanism of action of a glycolipid-like compound produced by Streptomyces blastmyceticus S108 against Candida clinical isolates

AIM

The present study aimed to investigate a novel antifungal compound produced by Streptomyces blastmyceticus S108 strain. Its effectiveness against clinical isolates of Candida species and its synergistic effect with conventional antifungal drugs were assessed, and its molecular mechanism of action was further studied against Candida albicans.

METHODS AND RESULTS

A newly isolated strain from Tunisian soil, S. blastmyceticus S108, showed significant antifungal activity against Candida species by well diffusion method. The butanolic extract of S108 strain supernatant exhibited the best anti-Candida activity with a minimal inhibitory concentration (MIC) value of 250 μg ml-1, determined by the microdilution method. The bio-guided purification steps of the butanolic extract were performed by chromatographic techniques. Among the fractions obtained, F13 demonstrated the highest level of activity, displaying a MIC of 31.25 μg ml-1. Gas chromatography-mass spectrometry and electrospray ionization mass spectrometry analyses of this fraction (F13) revealed the glycolipidic nature of the active molecule with a molecular weight of 685.6 m/z. This antifungal metabolite remained stable to physicochemical changes and did not show hemolytic activity even at 4MIC corresponding to 125 µg ml-1 toward human erythrocytes. Besides, the glycolipid compound was combined with 5-flucytosine and showed a high synergistic effect with a fractional inhibitory concentration index value 0.14 against C. albicans ATCC 10231. This combination resulted in a decrease of MIC values of 5-flucytosine and the glycolipid-like compound by 8- and 64-fold, respectively. The examination of gene expression in treated C. albicans cells by quantitative polymerase chain reaction (qPCR) revealed that the active compound tested alone or in combination with 5-flucytosine blocks the ergosterol biosynthesis pathway by downregulating the expression of ERG1, ERG3, ERG5, ERG11, and ERG25 genes.

CONCLUSION AND IMPACT OF THE STUDY

The new glycolipid-like compound, produced by Streptomyces S108 isolate, could be a promising drug for medical use against pathogenic Candida isolates.

Statistical Optimization of Biosurfactant Production from Aspergillus niger SA1 Fermentation Process and Mathematical Modeling

In this study, we sought to investigate the production and optimization of biosurfactants by soil fungi isolated from petroleum oil-contaminated soil in Saudi Arabia. Forty-four fungal isolates were isolated from ten petroleum oil-contaminated soil samples. All isolates were identified using the internal transcribed spacer (ITS) region, and biosurfactant screening showed that thirty-nine of the isolates were positive. Aspergillus niger SA1 was the highest biosurfactant producer, demonstrating surface tension, drop collapsing, oil displacement, and an emulsification index (E24) of 35.8 mN/m, 0.55 cm, 6.7 cm, and 70%, respectively. This isolate was therefore selected for biosurfactant optimization using the Fit Group model. The biosurfactant yield was increased 1.22 times higher than in the nonoptimized medium (8.02 g/l) under conditions of pH 6, temperature 35°C, waste frying oil (5.5 g), agitation rate of 200 rpm, and an incubation period of 7 days. Model significance and fitness analysis had an RMSE score of 0.852 and a p-value of 0.0016. The biosurfactant activities were surface tension (35.8 mN/m), drop collapsing (0.7 cm), oil displacement (4.5 cm), and E24 (65.0%). The time course of biosurfactant production was a growth-associated phase. The main outputs of the mathematical model for biomass yield were Yx/s (1.18), and μmax (0.0306) for biosurfactant yield was Yp/s (1.87) and Yp/x (2.51); for waste frying oil consumption the So was 55 g/l, and Ke was 2.56. To verify the model's accuracy, percentage errors between biomass and biosurfactant yields were determined by experimental work and calculated using model equations. The average error of biomass yield was 2.68%, and the average error percentage of biosurfactant yield was 3.39%.

An updated review of fatty acid residue-tethered heterocyclic compounds: synthetic strategies and biological significance

Heterocyclic compounds have been featured as the key building blocks for the development of biologically active molecules. In addition to being derived from renewable raw materials, fatty acids possess a variety of biological properties. The two bioactive ingredients are being combined by many researchers to produce hybrid molecules that have a number of desirable properties. Biological activities and significance of heterocyclic derivatives of fatty acids have been demonstrated in a new class of heterocyclic compounds called heterocyclic fatty acid hybrid derivatives. The significance of heterocyclic-fatty acid hybrid derivatives has been emphasized in numerous research articles over the past few years. In this review, we emphasize the development of synthetic methods and their biological evaluation for heterocyclic fatty acid derivatives. These reports, combined with the upcoming compilation, are expected to serve as comprehensive foundations and references for synthetic, preparative, and applicable methods in medicinal chemistry.

Chloroplast engineering of the green microalgae Chlamydomonas reinhardtii for the production of HAA, the lipid moiety of rhamnolipid biosurfactants

Hydroxyalkanoyloxyalkanoates (HAA) are lipidic surfactants with a number of potential applications, but more remarkably, they are the biosynthetic precursors of rhamnolipids (RL), which are preferred biosurfactants thanks to their excellent physicochemical properties, biological activities, and environmental biodegradability. Because the natural highest producer of RLs is the pathogenic bacterium Pseudomonas aeruginosa, important efforts have been dedicated to transfer production to heterologous non-pathogenic microorganisms. Unicellular photosynthetic microalgae are emerging as important hosts for sustainable industrial biotechnology due to their ability to transform CO₂ efficiently into biomass and bioproducts of interest. Here, we have explored the potential of the eukaryotic green microalgae Chlamydomonas reinhardtii as a chassis to produce RLs. Chloroplast genome engineering allowed the stable functional expression of the gene encoding RhlA acyltransferase from P. aeruginosa, an enzyme catalyzing the condensation of two 3-hydroxyacyl acid intermediaries in the fatty acid synthase cycle, to produce HAA. Four congeners of varying chain lengths were identified and quantified by UHPLC-QTOF mass spectrometry and gas chromatography, including C₁₀-C₁₀ and C₁₀-C₈, and the less abundant C₁₀-C₁₂ and C₁₀-C₆ congeners. HAA was present in the intracellular fraction, but also showed increased accumulation in the extracellular medium. Moreover, HAA production was also observed under photoautotrophic conditions based on atmospheric CO₂. These results establish that RhlA is active in the chloroplast and is able to produce a new pool of HAA in a eukaryotic host. Subsequent engineering of microalgal strains should contribute to the development of an alternative clean, safe and cost-effective platform for the sustainable production of RLs. DATA AVAILABILITY: The data that support the findings of this study are available from the corresponding authors upon reasonable request.

Remodeling of the Enterococcal Cell Envelope during Surface Penetration Promotes Intrinsic Resistance to Stress

Enterococcus faecalis is a normal commensal of the human gastrointestinal tract (GIT). However, upon disruption of gut homeostasis, this nonmotile bacterium can egress from its natural niche and spread to distal organs. While this translocation process can lead to life-threatening systemic infections, the underlying mechanisms remain largely unexplored. Our prior work showed that E. faecalis migration across diverse surfaces requires the formation of matrix-covered multicellular aggregates and the synthesis of exopolysaccharides, but how enterococcal cells are reprogrammed during this process is unknown. Whether surface penetration endows E. faecalis with adaptive advantages is also uncertain. Here, we report that surface penetration promotes the generation of a metabolically and phenotypically distinct E. faecalis population with an enhanced capacity to endure various forms of extracellular stress. Surface-invading enterococci demonstrated major ultrastructural alterations in their cell envelope characterized by increased membrane glycolipid content. These changes were accompanied by marked induction of specific transcriptional programs enhancing cell envelope biogenesis and glycolipid metabolism. Notably, the surface-invading population demonstrated superior tolerance to membrane-damaging antimicrobials, including daptomycin and β-defensins produced by epithelial cells. Genetic mutations impairing glycolipid biosynthesis sensitized E. faecalis to envelope stressors and reduced the ability of this bacterium to penetrate semisolid surfaces and translocate through human intestinal epithelial cell monolayers. Our study reveals that surface penetration induces distinct transcriptional, metabolic, and ultrastructural changes that equip E. faecalis with enhanced capacity to resist external stressors and thrive in its surrounding environment. IMPORTANCE Enterococcus faecalis inhabits the GIT of multiple organisms, where its establishment could be mediated by the formation of biofilm-like aggregates. In susceptible individuals, this bacterium can overgrow and breach intestinal barriers, a process that may lead to lethal systemic infections. While the formation of multicellular aggregates promotes E. faecalis migration across surfaces, little is known about the metabolic and physiological states of the enterococci encased in these surface-penetrating structures. The present study reveals that E. faecalis cells capable of migrating through semisolid surfaces genetically reprogram their metabolism toward increased cell envelope and glycolipid biogenesis, which confers superior tolerance to membrane-damaging agents. E. faecalis's success as a pathobiont depends on its antimicrobial resistance, as well as on its rapid adaptability to overcome multiple environmental challenges. Thus, targeting adaptive genetic and/or metabolic pathways induced during E. faecalis surface penetration may be useful to better confront infections by this bacterium in the clinic.

Enhanced biomass and lipid production by light exposure with mixed culture of Rhodotorula glutinis and Chlorella vulgaris using acetate as sole carbon source

Microbial biomass and lipid production with mixed-culture of Rhodotorula glutinis and Chlorella vulgaris using acetate as sole carbon source was investigated. Synergistic effect of mixed-culture using 20 g/L acetate significantly promoted cell growth and acetate utilization efficiency. Increasing the proportion of algae in co-culture was beneficial for biomass and lipid accumulation and the optimal ratio of yeast/algae was 1:2. Light exposure further enhanced biomass and lipid titer with 6.9 g/L biomass and 2.6 g/L lipid (38.3 % lipid content) obtained in a 5L bioreactor. The results of lipid classes and fatty acid profiles moreover indicated that more neutral lipids and linolenic acid were synthesized in mixed-culture under light exposure condition, suggesting the great potential in applications of biofuels production. This study provided new insight and strategy for economical microbial biomass and lipid production by light-exposed mixed-culture using inexpensive acetate as carbon source.

Demystifying the O-GlcNAc Code: A Systems View

Post-translational modification with O-linked β-N-acetylglucosamine (O-GlcNAc), a process referred to as O-GlcNAcylation, occurs on a vast variety of proteins. Mounting evidence in the past several decades has clearly demonstrated that O-GlcNAcylation is a unique and ubiquitous modification. Reminiscent of a code, protein O-GlcNAcylation functions as a crucial regulator of nearly all cellular processes studied. The primary aim of this review is to summarize the developments in our understanding of myriad protein substrates modified by O-GlcNAcylation from a systems perspective. Specifically, we provide a comprehensive survey of O-GlcNAcylation in multiple species studied, including eukaryotes (e.g., protists, fungi, plants, Caenorhabditis elegans, Drosophila melanogaster, murine, and human), prokaryotes, and some viruses. We evaluate features (e.g., structural properties and sequence motifs) of O-GlcNAc modification on proteins across species. Given that O-GlcNAcylation functions in a species-, tissue-/cell-, protein-, and site-specific manner, we discuss the functional roles of O-GlcNAcylation on human proteins. We focus particularly on several classes of relatively well-characterized human proteins (including transcription factors, protein kinases, protein phosphatases, and E3 ubiquitin-ligases), with representative O-GlcNAc site-specific functions presented. We hope the systems view of the great endeavor in the past 35 years will help demystify the O-GlcNAc code and lead to more fascinating studies in the years to come.

Biosurfactants: Properties and Applications in Drug Delivery, Biotechnology and Ecotoxicology

Surfactants are amphiphilic compounds having hydrophilic and hydrophobic moieties in their structure. They can be of synthetic or of microbial origin, obtained respectively from chemical synthesis or from microorganisms’ activity. A new generation of ecofriendly surfactant molecules or biobased surfactants is increasingly growing, attributed to their versatility of applications. Surfactants can be used as drug delivery systems for a range of molecules given their capacity to create micelles which can promote the encapsulation of bioactives of pharmaceutical interest; besides, these assemblies can also show antimicrobial properties. The advantages of biosurfactants include their high biodegradability profile, low risk of toxicity, production from renewable sources, functionality under extreme pH and temperature conditions, and long-term physicochemical stability. The application potential of these types of polymers is related to their properties enabling them to be processed by emulsification, separation, solubilization, surface (interfacial) tension, and adsorption for the production of a range of drug delivery systems. Biosurfactants have been employed as a drug delivery system to improve the bioavailability of a good number of drugs that exhibit low aqueous solubility. The great potential of these molecules is related to their auto assembly and emulsification capacity. Biosurfactants produced from bacteria are of particular interest due to their antibacterial, antifungal, and antiviral properties with therapeutic and biomedical potential. In this review, we discuss recent advances and perspectives of biosurfactants with antimicrobial properties and how they can be used as structures to develop semisolid hydrogels for drug delivery, in environmental bioremediation, in biotechnology for the reduction of production costs and also their ecotoxicological impact as pesticide alternative.

Isolation, screening and molecular characterization of biosurfactant producing bacteria from soil samples of auto repair shops

A total of 107 bacterial strains were isolated from used motor oil contaminated soil samples from auto-repair shops. The isolates were evaluated for their biosurfactant production abilities by employing a series of screening techniques, including hemolytic assay, oil displacement assay, drop-collapse assay, and parafilm M test. The potential biosurfactant producers were characterized by 16S rDNA-based molecular tools and were identified as Proteus mirabilis, Klebsiella pneumoniae, Enterobacter cloacae, Micrococcus sp., Citrobacter sp., and Bacillus sp. The widest clearing zone with a diameter of 6.5 cm was observed upon the addition of cell-free supernatant (CFS) from P. mirabilis SLM-B52 as assayed by the oil displacement test. Remarkable emulsification indexes, equivalent to 42% (against kerosene), 53% (against xylenes), and 50% (against benzene and toluene), were recorded by the CFSs of Micrococcus sp. SLM-B28, P. mirabilis SLM-B85, and K. pneumoniae SLM-B46, respectively. Du Noüy tensiometer analysis showed that biosurfactant produced by P. mirabilis SLM-B52 has the highest surface tension reduction capacity with a value of 30.5 mN m^-1. The emulsifying activity of a CFS from P. mirabilis was also described in this study for the first time. Taking together, biosurfactants from promising bacterial strains have potential application in microorganism-based biodegradation processes of hydrocarbons which cause detrimental effects on the environment.

Liamocins biosynthesis, its regulation in Aureobasidium spp., and their bioactivities

Liamocins synthesized by Aureobasidium spp. are glycolipids composed of a single mannitol or arabitol headgroup linked to either three, four or even six 3,5-dihydroxydecanoic ester tail-groups. The highest titer of liamocin achieved was over 40.0 g/L. The substrates for liamocins synthesis include glucose, sucrose, xylose, mannitol, and others. The Pks1 is responsible for the biosynthesis of the tail-group 3,5-dihydroxydecanoic acid, both mannitol dehydrogenase (MDH) and mannitol 1-phosphate 5-dehydrogenase (MPDH) catalyze the mannitol biosynthesis and the arabitol biosynthesis is controlled by arabitol dehydrogenase (ArDH). The ester bond formation between 3,5-dihydroxydecanoic acid and mannitol or arabitol is catalyzed by the esterase (Est1). Liamocin biosynthesis is regulated by the specific transcriptional activator (Gal1), global transcriptional activator (Msn2), various signaling pathways, acetyl-CoA flux while Pks1 activity is controlled by PPTase activity. The synthesized liamocins have high bioactivity against the pathogenic bacteria Streptococcus spp. and some kinds of cancer cells while Massoia lactone released liamocins which exhibited obvious antifungal and anticancer activities. Therefore, liamocins and Massoia lactone have many applications in various sectors of biotechnology.

Fungal biosurfactants, from nature to biotechnological product: bioprospection, production and potential applications

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented.

Production of Biosurfactants by Ascomycetes

Surfactants are utilized to reduce surface tension in aqueous and nonaqueous systems. Currently, most synthetic surfactants are derived from petroleum. However, these surfactants are usually highly toxic and are poorly degraded by microorganisms. To overcome these problems associated with synthetic surfactants, the production of microbial surfactants (called biosurfactants) has been studied in recent years. Most studies investigating the production of biosurfactants have been associated mainly with bacteria and yeasts; however, there is emerging evidence that those derived from fungi are promising. The filamentous fungi ascomycetes have been studied for the production of biosurfactants from renewable substrates. However, the yield of biosurfactants by ascomycetes depends on several factors, such as the species, nutritional sources, and environmental conditions. In this review, we explored the production, chemical characterization, and application of biosurfactants by ascomycetes.

Total synthesis, isolation, surfactant properties, and biological evaluation of ananatosides and related macrodilactone-containing rhamnolipids

Rhamnolipids are a specific class of microbial surfactants, which hold great biotechnological and therapeutic potential. However, their exploitation at the industrial level is hampered because they are mainly produced by the opportunistic pathogen Pseudomonas aeruginosa. The non-human pathogenic bacterium Pantoea ananatis is an alternative producer of rhamnolipid-like metabolites containing glucose instead of rhamnose residues. Herein, we present the isolation, structural characterization, and total synthesis of ananatoside A, a 15-membered macrodilactone-containing glucolipid, and ananatoside B, its open-chain congener, from organic extracts of P. ananatis. Ananatoside A was synthesized through three alternative pathways involving either an intramolecular glycosylation, a chemical macrolactonization or a direct enzymatic transformation from ananatoside B. A series of diasteroisomerically pure (1→2), (1→3), and (1→4)-macrolactonized rhamnolipids were also synthesized through intramolecular glycosylation and their anomeric configurations as well as ring conformations were solved using molecular modeling in tandem with NMR studies. We show that ananatoside B is a more potent surfactant than its macrolide counterpart. We present evidence that macrolactonization of rhamnolipids enhances their cytotoxic and hemolytic potential, pointing towards a mechanism involving the formation of pores into the lipidic cell membrane. Lastly, we demonstrate that ananatoside A and ananatoside B as well as synthetic macrolactonized rhamnolipids can be perceived by the plant immune system, and that this sensing is more pronounced for a macrolide featuring a rhamnose moiety in its native 1 C 4 conformation. Altogether our results suggest that macrolactonization of glycolipids can dramatically interfere with their surfactant properties and biological activity.

The role of transport proteins in the production of microbial glycolipid biosurfactants

Several microorganisms are currently being used as production platform for glycolipid biosurfactants, providing a greener alternative to chemical biosurfactants. One of the reasons why these processes are commercially competitive is the fact that microbial producers can efficiently export their product to the extracellular environment, reaching high product titers. Glycolipid biosynthetic genes are often found in a dedicated cluster, amidst which genes encoding a dedicated transporter committed to shuttle the glycolipid to the extracellular environment are often found, as is the case for many other secondary metabolites. Knowing this, one can rely on gene clustering features to screen for novel putative transporters, as described and performed in this review. The above strategy proves to be very powerful to identify glycolipid transporters in fungi but is less valid for bacterial systems. Indeed, the genetics of these export systems are currently largely unknown, but some hints are given. Apart from the direct export of the glycolipid, several other transport systems have an indirect effect on glycolipid production. Specific importers dictate which hydrophilic and hydrophobic substrates can be used for production and influence the final yields. In eukaryotes, cellular compartmentalization allows the assembly of glycolipid building blocks in a highly specialized and efficient way. Yet, this requires controlled transport across intracellular membranes. Next to the direct export of glycolipids, the current state of the art regarding this indirect involvement of transporter systems in microbial glycolipid synthesis is summarized in this review. KEY POINTS: • Transporters are directly and indirectly involved in microbial glycolipid synthesis. • Yeast glycolipid transporters are found in their biosynthetic gene cluster. • Hydrophilic and hydrophobic substrate uptake influence microbial glycolipid synthesis.

Isolation and optimized production of putative antimicrobial compounds from Egyptian soil isolate Streptomyces sp. MS. 10

Background

The rapid spread of antibiotic resistance has increased research interest in the discovery of natural products, mainly from actinomycetes, which have been the primary source of antimicrobial compounds. This study aimed to isolate, characterize, and optimize the production of some of the bioactive compounds from bioactive soil actinomycetes.

Results

One promising soil actinomycete, which was molecularly identified as Streptomyces sp. and designated as Streptomyces sp. MS. 10, showed broad-spectrum antimicrobial activity, including activity against methicillin-resistant Staphylococcus aureus. Thus, it was selected for isolation of its major bioactive compounds. Polymerase chain reaction amplification of the genes responsible for antibiotic biosynthesis showed the presence of genes encoding type I and type II polyketide synthase. Liquid chromatography-mass spectrometry analysis found that the major antimicrobial compounds produced by Streptomyces sp. MS. 10 were weakly ionized bioactive secondary metabolites. A large-scale fermentation experiment of Streptomyces sp. MS. 10 using pre-optimized culture conditions followed by bioassay-guided chromatographic separation of its secondary metabolites resulted in the isolation of putative bioactive compounds that were identified as fatty acids using proton nuclear magnetic resonance spectroscopy.

Conclusions

Egyptian soil is still a good source for exploring bioactive actinomycetes. Additionally, this study highlighted the importance of combining both physicochemical and genotypic characterization with spectroscopic analysis of the major natural products when isolating bioactive metabolites.

Genetic evidences for the core biosynthesis pathway, regulation, transport and secretion of liamocins in yeast-like fungal cells

So far, it has been still unknown how liamocins are biosynthesized, regulated, transported and secreted. In this study, a highly reducing polyketide synthase (HR-PKS), a mannitol-1-phosphate dehydrogenase (MPDH), a mannitol dehydrogenase (MtDH), an arabitol dehydrogenase (ArDH) and an esterase (Est1) were found to be closely related to core biosynthesis of extracellular liamocins in Aureobasidium melanogenum 6-1-2. The HR-PKS was responsible for biosynthesis of 3,5-dihydroxydecanoic acid. The MPDH and MtDH were implicated in mannitol biosynthesis and the ArDH was involved in arabitol biosynthesis. The Est1 catalyzed ester bond formation of them. A phosphopantetheine transferase (PPTase) activated the HR-PKS and a transcriptional activator Ga11 activated expression of the PKS1 gene. Therefore, deletion of the PKS1 gene, all the three genes encoding MPDH, MtDH and ArDH, the EST1, the gene responsible for PPTase and the gene for Ga11 made all the disruptants (Δpks13, Δpta13, Δest1, Δp12 and Δg11) totally lose the ability to produce any liamocins. A GLTP gene encoding a glycolipid transporter and a MDR1 gene encoding an ABC transporter took part in transport and secretion of the produced liamocins into medium. Removal of the GLTP gene and the MDR1 gene resulted in a Δgltp1 mutant and a Δmdr16 mutant, respectively, that lost the partial ability to secrete liamocins, but which cells were swollen and intracellular lipid accumulation was greatly enhanced. Hydrolysis of liamocins released 3,5-dihydroxydecanoic acid, mannitol, arabitol and acetic acid. We proposed a core biosynthesis pathway, regulation, transport and secretion of liamocins in A. melanogenum.

Biosurfactants as a Novel Additive in Pharmaceutical Formulations: Current Trends and Future Implications

BACKGROUND

Surfactants are an important category of additives that are used widely in most of the formulations as solubilizers, stabilizers, and emulsifiers. Current drug delivery systems comprise of numerous synthetic surfactants (such as Cremophor EL, polysorbate 80, Transcutol-P), which are associated with several side effects though used in many formulations. Therefore, to attenuate the problems associated with conventional surfactants, a new generation of surface-active agents is obtained from the metabolites of fungi, yeast, and bacteria, which are termed as biosurfactants.

OBJECTIVES

In this article, we critically analyze the different types of biosurfactants, their origin along with their chemical and physical properties, advantages, drawbacks, regulatory status, and detailed pharmaceutical applications.

METHODS

243 papers were reviewed and included in this review.

RESULTS

Briefly, Biosurfactants are classified as glycolipids, rhamnolipids, sophorolipids, trehalolipids, surfactin, lipopeptides & lipoproteins, lichenysin, fatty acids, phospholipids, and polymeric biosurfactants. These are amphiphilic biomolecules with lipophilic and hydrophilic ends and are used as drug delivery vehicles (foaming, solubilizer, detergent, and emulsifier) in the pharmaceutical industry. Despite additives, they have some biological activity as well (anti-cancer, anti-viral, anti-microbial, P-gp inhibition, etc.). These biomolecules possess better safety profiles and are biocompatible, biodegradable, and specific at different temperatures.

CONCLUSION

Biosurfactants exhibit good biomedicine and additive properties that can be used in developing novel drug delivery systems. However, more research should be driven due to the lack of comprehensive toxicity testing and high production cost which limits their use.

Itaconic acid derivatives: structure, function, biosynthesis, and perspectives

Itaconic acid possessing a vinylidene group, which is mainly produced by fungi, is used as a biobased platform chemical and shows distinctive bioactivities. On the other hand, some fungi and lichens produce itaconic acid derivatives possessing itaconic acid skeleton, and the number of the derivatives is currently more than seventy. Based on the molecular structures, they can be categorized into two groups, alkylitaconic acids and α-methylene-γ-butyrolactones. Interestingly, some itaconic acid derivatives show versatile functions such as antimicrobial, anti-inflammatory, antitumor, and plant growth-regulating activities. The vinylidene group of itaconic acid derivatives likely participates in these functions. It is suggested that α-methylene-γ-butyrolactones are biosynthesized from alkylitaconic acids which are first biosynthesized from acyl-CoA and oxaloacetic acid. Some modifying enzymes such as hydroxylase and dehydratase are likely involved in the further modification after biosynthesis of their precursors. This contributes to the diversity of itaconic acid derivatives. In this review, we summarize their structures, functions, and biosynthetic pathways together with a discussion of a strategy for the industrial use. KEY POINTS: • Itaconic acid derivatives can be categorized into alkylitaconic acids and α-methylene-γ-butyrolactones. • The vinylidene group of itaconic acid derivatives likely participates in their versatile function. • It is suggested that α-methylene-γ-butyrolactones are biosynthesized from alkylitaconic acids which are first synthesized from acyl-CoA and oxaloacetic acid.

Metabolic engineering for glycoglycerolipids production in E. coli: Tuning phosphatidic acid and UDP-glucose pathways

Glycolipids are target molecules in biotechnology and biomedicine as biosurfactants, biomaterials and bioactive molecules. An engineered E. coli strain for the production of glycoglycerolipids (GGL) used the MG517 glycolipid synthase from M. genitalium for glucosyl transfer from UDPGlc to diacylglycerol acceptor (Mora-Buyé et al., 2012). The intracellular diacylglycerol pool proved to be the limiting factor for GGL production. Here we designed different metabolic engineering strategies to enhance the availability of precursor substrates for the glycolipid synthase by modulating fatty acids, acyl donor and phosphatidic acid biosynthesis. Knockouts of tesA, fadE and fabR genes involved in fatty acids degradation, overexpression of the transcriptional regulator FadR, the acyltransferases PlsB and C, and the pyrophosphatase Cdh for phosphatidic acid biosynthesis, as well as the phosphatase PgpB for conversion to diacylglycerol were explored with the aim of improving GGL titers. Among the different engineered strains, the ΔtesA strain co-expressing MG517 and a fusion PlsCxPgpB protein was the best producer, with a 350% increase of GGL titer compared to the parental strain expressing MG517 alone. Attempts to boost UDPGlc availability by overexpressing the uridyltransferase GalU or knocking out the UDP-sugar diphosphatase encoding gene ushA did not further improve GGL titers. Most of the strains produced GGL containing a variable number of glucosyl units from mono-to tetra-saccharides. Interestingly, the strains co-expressing Cdh showed a shift in the GGL profile towards the diglucosylated lipid (up to 80% of total GGLs) whereas the strains with a fadR knockout presented a higher amount of unsaturated acyl chains. In all cases, GGL production altered the lipidic composition of the E. coli membrane, observing that GGL replace phosphatidylethanolamine to maintain the overall membrane charge balance.

Production of cupcake-like dessert containing microbial biosurfactant as an emulsifier

This work describes the application of the biosurfactant from Candida bombicola URM 3718 as a meal additive like cupcake. The biosurfactant was produced in a culture medium containing 5% sugar cane molasses, 5% residual soybean oil and 3% corn steep liquor. The surface and interfacial tension of the biosurfactant were 30.790 ± 0.04 mN/m and 0.730 ± 0.05 mN/m, respectively. The yield in isolated biosurfactant was 25 ± 1.02 g/L and the CMC was 0.5 g/L. The emulsions of the isolated biosurfactant with vegetable oils showed satisfactory results. The microphotographs of the emulsions showed that increasing the concentration of biosurfactant decreased the oil droplets, increasing the stability of the emulsions. The biosurfactant was incorporated into the cupcake dessert formulation, replacing 50%, 75% and 100% of the vegetable fat in the standard formulation. Thermal analysis showed that the biosurfactant is stable for cooking cupcakes (180 °C). The biosurfactant proved to be promising for application in foods low in antioxidants and did not show cytotoxic potential in the tested cell lines. Cupcakes with biosurfactant incorporated in their dough did not show significant differences in physical and physical–chemical properties after baking when compared to the standard formulation. In this way, the biosurfactant has potential for application in the food industry as an emulsifier for flour dessert.

Enzymatic modification to produce health-promoting lipids from fish oil, algae and other new omega-3 sources: A review

Lipases are a versatile class of enzymes that have aroused great interest in the food and pharmaceutical industries due to their ability to modify and synthesize new lipids for functional foods. Omega-3 polyunsaturated fatty acids (omega-3 PUFAs), such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), have shown important biological functions promoting human health, especially in the development and maintenance of brain function and vision. Lipases allow selective production of functional lipids enriched in omega-3 PUFAs and are unique enzymatic tools to improve the natural composition of lipids and provide specific bioactivities. This review comprises recent research trends on the enzymatic production of bioactive, structured lipids with improved nutritional characteristics, using new enzymatic processing technologies in combination with novel raw materials, including microalgal lipids and new seed oils high in omega-3 fatty acids. An extensive number of lipase applications in the synthesis of health-promoting lipids enriched in omega-3 fatty acids by enzymatic modification is reviewed, considering the main advances in recent years for production of ethyl esters, 2-monoacylglycerols and structured triglycerides and phospholipids with omega-3 fatty acids, in order to achieve bioactive lipids as new foods and drugs.

Mannosylerythritol lipids: antimicrobial and biomedical properties

Mannosylerythritol lipids (MELs) have attracted particular interest of medical, pharmaceutical, and cosmetic fields, due to their specific characteristics, including non-toxicity, easy biodegradability, and environmental compatibility. Therefore, this review aims to highlight recent findings on MEL biological properties, focusing on issues related to therapeutic applications. Among the main findings is that MELs can play a fundamental role due to their antimicrobial properties against several nosocomial pathogen microorganisms. Other remarkable biological properties of MELs are related to skincare, as antiaging (active agent), and in particular on recover of skin cells that were damaged by UV radiation. MEL is also related to the increased efficiency of DNA transfection in liposome systems. Regarding the health field, these glycolipids seem to be associated with disturbance in the membrane composition of cancerous cells, increasing expression of genes responsible for cytoplasmic stress and apoptosis. Moreover, MELs can be associated with nanoparticles, as a capping agent, also acting to increase the solubility and cytotoxicity of them. Furthermore, the differences in the chemical structure of MEL could improve and expand their biochemical diversity and applications. Such modifications could change their interfacial properties and, thus, reduce the surface tension value, enhance the solubility, lower critical micelle concentrations, and form unique self-assembly structures. The latest is closely related to molecular recognition and protein stabilization properties of MEL, that is, essential parameters for their effective cosmetical and pharmaceutical effects. Thus, this current research indicates the huge potential of MEL for use in biomedical formulations, either alone or in combination with other molecules.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Marine Biosurfactants: Biosynthesis, Structural Diversity and Biotechnological Applications

Biosurfactants are amphiphilic secondary metabolites produced by microorganisms. Marine bacteria have recently emerged as a rich source for these natural products which exhibit surface-active properties, making them useful for diverse applications such as detergents, wetting and foaming agents, solubilisers, emulsifiers and dispersants. Although precise structural data are often lacking, the already available information deduced from biochemical analyses and genome sequences of marine microbes indicates a high structural diversity including a broad spectrum of fatty acid derivatives, lipoamino acids, lipopeptides and glycolipids. This review aims to summarise biosyntheses and structures with an emphasis on low molecular weight biosurfactants produced by marine microorganisms and describes various biotechnological applications with special emphasis on their role in the bioremediation of oil-contaminated environments. Furthermore, novel exploitation strategies are suggested in an attempt to extend the existing biosurfactant portfolio.

Genomic Insights of Halophilic Planococcus maritimus SAMP MCC 3013 and Detail Investigation of Its Biosurfactant Production

Moderate halophilic bacteria thrive in saline conditions and produce biosurfactant (BS) which facilitates the oil scavenging activity in the oil polluted surroundings. Production of such unusual bioactive molecules plays a vital role for their survival in an extreme and adverse environment. Current research deals with isolation of Planococcus maritimus strain SAMP MCC 3013 from Indian Arabian coastline sea water for BS production. The bacterium tolerated up to 2.7 M NaCl demonstrating osmotic stress bearable physiological systems. We used integrated approach to explore the genomic insight of the strain SAMP and displayed the presence of gene for BS biosynthesis. The genome analysis revealed this potential to be intrinsic to the strain. Preliminary screening techniques viz., surface tension (SFT), drop collapse (DC) and oil displacement (OD) showed SAMP MCC 3013 as a potent BS producer. BS reduced SFT of phosphate buffer saline (PBS) pH: 7.0 from 72 to 30 mN/m with a critical micelle concentration (CMC) value of 1.3 mg/mL. Subsequent investigation on chemical characterization, using thin layer chromatography (TLC), Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (1H NMR and 13C NMR) and liquid chromatography mass spectrometry (LC-MS) revealed terpene containing BS having sugar, lipid moieties. The genomic sequence analysis of P. maritimus SAMP showed complete genes in the pathway for the synthesis of terpenoid. Probably terpenoid is the accountable backbone molecule for the BS production, but the later stages of terpenoid conversion to the BS could not be found. Moreover, it is important to highlight that till today; no single report documents the in-detailed physico-chemical characterization of BS from Planococcus sp. Based on genomic and functional properties, the term terpene containing BS is denoted for the surfactant produced by P. maritimus.