Novel α-mannose-functionalized poly(β-amino ester) nanoparticles as mRNA vaccines with increased antigen presenting cell selectivity in the spleen

mRNA vaccination has emerged as a prominent therapy for the future of medicine. Despite the colossal advance in this technology and worldwide efficacy proof (ca. COVID vaccines), mRNA carriers still lack cell/tissue specificity, leading to possible side effects, and reduced efficacy among others. Herein we make use of the ubiquitous affinity of antigen-presenting cells (APC)s for glycosides to achieve specific targeting. To achieve this goal, we designed a new generation of α-mannosyl functionalized oligopeptide-terminated poly(β-aminoester). Fine formulation of these polymers with mRNA resulted in nanoparticles decorated with surface-exposed α-mannoses with sizes around 180 nm and positive surface charge. Notably, these particles maintained their properties after freeze-drying and subsequent redispersion. Finally, our mRNA carriers preferentially targeted and transfected APCs in vitro and in vivo. In conclusion, we demonstrated, at a preclinical level, that the mannose functionalization enables more selective targeting of APCs and, thus, these polymer and nanoparticles are candidates for a new generation of mRNA immunotherapy vaccines.

Enzymatic Hydrolysis of Human Milk Oligosaccharides. The Molecular Mechanism of Bifidobacterium Bifidum Lacto-N-biosidase

Bifidobacterium bifidum lacto-N-biosidase (LnbB) is a critical enzyme for the degradation of human milk oligosaccharides in the gut microbiota of breast-fed infants. Guided by recent crystal structures, we unveil its molecular mechanism of catalysis using QM/MM metadynamics. We show that the oligosaccharide substrate follows ¹S₃/^1,4B → [⁴E]^‡ → ⁴C₁/⁴H₅ and ⁴C₁/⁴H₅ → [⁴E/⁴H₅]^‡ → ^1,4B conformational itineraries for the two successive reaction steps, with reaction free energy barriers in agreement with experiments. The simulations also identify a critical histidine (His263) that switches between two orientations to modulate the pK_a of the acid/base residue, facilitating catalysis. The reaction intermediate of LnbB is best depicted as an oxazolinium ion, with a minor population of neutral oxazoline. The present study sheds light on the processing of oligosaccharides of the early life microbiota and will be useful for the engineering of LnbB and similar glycosidases for biocatalysis.

Transglycosylation Activity of Engineered Bifidobacterium Lacto-N-Biosidase Mutants at Donor Subsites for Lacto-N-Tetraose Synthesis

The health benefits of human milk oligosaccharides (HMOs) make them attractive targets as supplements for infant formula milks. However, HMO synthesis is still challenging and only two HMOs have been marketed. Engineering glycoside hydrolases into transglycosylases may provide biocatalytic routes to the synthesis of complex oligosaccharides. Lacto-N-biosidase from Bifidobacterium bifidum (LnbB) is a GH20 enzyme present in the gut microbiota of breast-fed infants that hydrolyzes lacto-N-tetraose (LNT), the core structure of the most abundant type I HMOs. Here we report a mutational study in the donor subsites of the substrate binding cleft with the aim of reducing hydrolytic activity and conferring transglycosylation activity for the synthesis of LNT from p-nitrophenyl β-lacto-N-bioside and lactose. As compared with the wt enzyme with negligible transglycosylation activity, mutants with residual hydrolase activity within 0.05% to 1.6% of the wild-type enzyme result in transglycosylating enzymes with LNT yields in the range of 10-30%. Mutations of Trp394, located in subsite -1 next to the catalytic residues, have a large impact on the transglycosylation/hydrolysis ratio, with W394F being the best mutant as a biocatalyst producing LNT at 32% yield. It is the first reported transglycosylating LnbB enzyme variant, amenable to further engineering for practical enzymatic synthesis of LNT.

Auxiliary active site mutations enhance the glycosynthase activity of a GH18 chitinase for polymerization of chitooligosaccharides

Depolymerization of chitin results in chitooligosaccharides (COS) that induce immunostimulatory effects and disease protective responses and have many potential applications in agriculture and medicine. Isolation of bioactive COS with degree of polymerization (DP) larger than six from chitin hydrolyzates is hampered by their water insolubility. Enzymatic synthesis by exploiting the transglycosylation activity of GH18 chitinases offers a potential strategy to access oligomers in the range of bioactive DPs. We engineered SpChiD chitinase as a glycosynthase by mutation of the assisting residue of the catalytic triad in the substrate-assisted mechanism for polymerization of an oxazoline substrate (DP5ox). The insoluble polymer containing DP10 was partially hydrolyzed due to the significant residual hydrolase activity of the mutant enzyme. Combined mutations that strongly reduce the hydrolytic activity, in which the original catalytic triad only retains the essential acid/base residue, together with neighboring mutations in the -1/+1 subsites region, render glycosynthase-like chitinases able to produce chitin oligomers with DP10 as major product in good yields.

Metabolic engineering for glycoglycerolipids production in E. coli: Tuning phosphatidic acid and UDP-glucose pathways

Glycolipids are target molecules in biotechnology and biomedicine as biosurfactants, biomaterials and bioactive molecules. An engineered E. coli strain for the production of glycoglycerolipids (GGL) used the MG517 glycolipid synthase from M. genitalium for glucosyl transfer from UDPGlc to diacylglycerol acceptor (Mora-Buyé et al., 2012). The intracellular diacylglycerol pool proved to be the limiting factor for GGL production. Here we designed different metabolic engineering strategies to enhance the availability of precursor substrates for the glycolipid synthase by modulating fatty acids, acyl donor and phosphatidic acid biosynthesis. Knockouts of tesA, fadE and fabR genes involved in fatty acids degradation, overexpression of the transcriptional regulator FadR, the acyltransferases PlsB and C, and the pyrophosphatase Cdh for phosphatidic acid biosynthesis, as well as the phosphatase PgpB for conversion to diacylglycerol were explored with the aim of improving GGL titers. Among the different engineered strains, the ΔtesA strain co-expressing MG517 and a fusion PlsCxPgpB protein was the best producer, with a 350% increase of GGL titer compared to the parental strain expressing MG517 alone. Attempts to boost UDPGlc availability by overexpressing the uridyltransferase GalU or knocking out the UDP-sugar diphosphatase encoding gene ushA did not further improve GGL titers. Most of the strains produced GGL containing a variable number of glucosyl units from mono-to tetra-saccharides. Interestingly, the strains co-expressing Cdh showed a shift in the GGL profile towards the diglucosylated lipid (up to 80% of total GGLs) whereas the strains with a fadR knockout presented a higher amount of unsaturated acyl chains. In all cases, GGL production altered the lipidic composition of the E. coli membrane, observing that GGL replace phosphatidylethanolamine to maintain the overall membrane charge balance.

Glycosynthase-type GH18 mutant chitinases at the assisting catalytic residue for polymerization of chitooligosaccharides

Chitooligosaccharides (COS), the depolymerization products of chitin, have many potential applications in agriculture and medicine since they induce immunostimulating effects and disease protective responses. Most of their biological activities require degrees of polymerization (DP) larger than the tetrasaccharide, but structurally well-defined COS with DP larger than six are difficult to produce due to their high insolubility and complex isolation from chitin hydrolysates. Enzymatic synthesis by exploiting the transglycosylation activity of chitinases offers a potential strategy for the assembly of oligomers in the range of bioactive DPs. We here explore the glycosynthase-like activity of six GH18 chitinases from bacterial and archaeal origin by mutating the catalytic assisting residue in the substrate-assisted mechanism of this enzyme family. The alanine mutants at the assisting residue have a significant, but not essential, effect on the hydrolase activity. We studied the ability of the alanine mutants at the assisting residue to catalyze the polymerization of an oxazoline derivative as donor substrate, selecting the oxazoline of pentaacetylchitopentaose (DP5ox) with the aim of obtaining larger oligomers/polymers that, being insoluble, might be resistant to further reactions by the hydrolytically compromised mutant enzymes. For all the enzymes, insoluble polymeric material was obtained, with DP10 as major component, but other COS with different DPs were also obtained, limiting the practical application to produce oligomers/polymers with a defined DP. The balance between the residual hydrolase activity of the mutant enzymes and the solubility/precipitation kinetics still lead to hydrolysis and/or transglycosylation reactions on the newly formed products. From the selected enzymes, the Thermococcus kodakaraensis ChiA D1022A mutant gave the best results, with the formation of insoluble polymers in 45% yield (w/w) and containing about 55% of the target DP10 product.

Structural-Functional Analysis Reveals a Specific Domain Organization in Family GH20 Hexosaminidases

Hexosaminidases are involved in important biological processes catalyzing the hydrolysis of N-acetyl-hexosaminyl residues in glycosaminoglycans and glycoconjugates. The GH20 enzymes present diverse domain organizations for which we propose two minimal model architectures: Model A containing at least a non-catalytic GH20b domain and the catalytic one (GH20) always accompanied with an extra α-helix (GH20b-GH20-α), and Model B with only the catalytic GH20 domain. The large Bifidobacterium bifidum lacto-N-biosidase was used as a model protein to evaluate the minimal functional unit due to its interest and structural complexity. By expressing different truncated forms of this enzyme, we show that Model A architectures cannot be reduced to Model B. In particular, there are two structural requirements general to GH20 enzymes with Model A architecture. First, the non-catalytic domain GH20b at the N-terminus of the catalytic GH20 domain is required for expression and seems to stabilize it. Second, the substrate-binding cavity at the GH20 domain always involves a remote element provided by a long loop from the catalytic domain itself or, when this loop is short, by an element from another domain of the multidomain structure or from the dimeric partner. Particularly, the lacto-N-biosidase requires GH20b and the lectin-like domain at the N- and C-termini of the catalytic GH20 domain to be fully soluble and functional. The lectin domain provides this remote element to the active site. We demonstrate restoration of activity of the inactive GH20b-GH20-α construct (model A architecture) by a complementation assay with the lectin-like domain. The engineering of minimal functional units of multidomain GH20 enzymes must consider these structural requirements.

Artificial mixed-linked β-glucans produced by glycosynthase-catalyzed polymerization: tuning morphology and degree of polymerization

The glycosynthase derived from Bacillus licheniformis 1,3-1,4-β-glucanase was able to polymerize glycosyl fluoride donors (G4)(m)G3GαF (m = 0-2, G = Glcβ) leading to artificial mixed-linked β-glucans with regular sequences and variable β1,3 to β1,4 linkage ratios. With the E134A glycosynthase mutant, polymers had average molecular masses (M(w)) of 10-15 kDa. Whereas polymer 2 ([4G4G3G](n)) was an amorphous precipitate, the water-insoluble polymers 1 ([4G3G](n)) and 3 ([4G4G4G3G](n)) formed spherulites of 10-20 μm diameter. With the more active E134S glycosynthase mutant, polymerization led to high molecular mass polysaccharides, where M(w) was linearly dependent on enzyme concentration. Remarkably, a homo-polysaccharide [4G4G4G3G](n) with M(w) as high as 30.5 kDa (n ≈ 47) was obtained, which contained a small fraction of products up to 70 kDa, a value that is in the range of the molecular masses of low viscosity cereal 1,3-1,4-β-glucans, and among the largest products produced by a glycosynthase. Access to a range of novel tailor-made β-glucans through the glycosynthase technology will allow to evaluate the implications of polysaccharide fine structures in their physicochemical properties and their applications as biomaterials, as well as to provide valuable tools for biochemical characterization of β-glucan degrading enzymes and binding modules.

Physiological responses to folate overproduction in Lactobacillus plantarum WCFS1

BACKGROUND

Using a functional genomics approach we addressed the impact of folate overproduction on metabolite formation and gene expression in Lactobacillus plantarum WCFS1. We focused specifically on the mechanism that reduces growth rates in folate-overproducing cells.

RESULTS

Metabolite formation and gene expression were determined in a folate-overproducing- and wild-type strain. Differential metabolomics analysis of intracellular metabolite pools indicated that the pool sizes of 18 metabolites differed significantly between these strains. The gene expression profile was determined for both strains in pH-regulated chemostat culture and batch culture. Apart from the expected overexpression of the 6 genes of the folate gene cluster, no other genes were found to be differentially expressed both in continuous and batch cultures. The discrepancy between the low transcriptome and metabolome response and the 25% growth rate reduction of the folate overproducing strain was further investigated. Folate production per se could be ruled out as a contributing factor, since in the absence of folate production the growth rate of the overproducer was also reduced by 25%. The higher metabolic costs for DNA and RNA biosynthesis in the folate overproducing strain were also ruled out. However, it was demonstrated that folate-specific mRNAs and proteins constitute 8% and 4% of the total mRNA and protein pool, respectively.

CONCLUSION

Folate overproduction leads to very little change in metabolite levels or overall transcript profile, while at the same time the growth rate is reduced drastically. This shows that Lactobacillus plantarum WCFS1 is unable to respond to this growth rate reduction, most likely because the growth-related transcripts and proteins are diluted by the enormous amount of gratuitous folate-related transcripts and proteins.

In vitro synthesis of artificial polysaccharides by glycosidases and glycosynthases

Artificial polysaccharides produced by in vitro enzymatic synthesis are new biomaterials with defined structures that either mimic natural polysaccharides or have unnatural structures and functionalities. This review summarizes recent developments in the in vitro polysaccharide synthesis by endo-glycosidases, grouped in two major strategies: (a) native retaining endo-glycosidases under kinetically controlled conditions (transglycosylation with activated glycosyl donors), and (b) glycosynthases, engineered glycosidases devoid of hydrolase activity but with high transglycosylation activity. Polysaccharides are obtained by enzymatic polymerization of simple glycosyl donors by repetitive condensation. This approach not only provides a powerful methodology to produce polysaccharides with defined structures and morphologies as novel biomaterials, but is also a valuable tool to analyze the mechanisms of polymerization and packing to acquire high-order molecular assemblies.

Comparison of quenching and extraction methodologies for metabolome analysis of Lactobacillus plantarum

Background

A reliable quenching and metabolite extraction method has been developed for Lactobacillus plantarum. The energy charge value was used as a critical indicator for fixation of metabolism.

Results

Four different aqueous quenching solutions, all containing 60% of methanol, were compared for their efficiency. Only the solutions containing either 70 mM HEPES or 0.85% (w/v) ammonium carbonate (pH 5.5) caused less than 10% cell leakage and the energy charge of the quenched cells was high, indicating rapid inactivation of the metabolism.

The efficiency of extraction of intracellular metabolites from cell cultures depends on the extraction methods, and is expected to vary between micro-organisms. For L. plantarum, we have compared five different extraction methodologies based on (i) cold methanol, (ii) perchloric acid, (iii) boiling ethanol, (iv) chloroform/methanol (1:1) and (v) chloroform/water (1:1). Quantification of representative intracellular metabolites showed that the best extraction efficiencies were achieved with cold methanol, boiling ethanol and perchloric acid.

Conclusion

The ammonium carbonate solution was selected as the most suitable quenching buffer for metabolomics studies in L. plantarum because (i) leakage is minimal, (ii) the energy charge indicates good fixation of metabolism, and (iii) all components are easily removed during freeze-drying. A modified procedure based on cold methanol extraction combined good extractability with mild extraction conditions and high enzymatic inactivation. These features make the combination of these quenching and extraction protocols very suitable for metabolomics studies with L. plantarum.

Acceptor-dependent regioselectivity of glycosynthase reactions by Streptomyces E383A β-glucosidase

The nonnucleophilic mutant E383A beta-glucosidase from Streptomyces sp. has proven to be an efficient glycosynthase enzyme, catalyzing the condensation of alpha-glucosyl and alpha-galactosyl fluoride donors to a variety of acceptors. The enzyme has maximal activity at 45 degrees C, and a pH-dependence reflecting general base catalysis with an apparent kinetic pKa of 7.2. The regioselectivity of the new glycosidic linkage depends unexpectedly on the acceptor substrate. With aryl monosaccharide acceptors, beta-(1-->3) disaccharides are obtained in good to excellent yields, thus expanding the synthetic products available with current exo-glycosynthases. With xylopyranosyl acceptor, regioselectivity is poorer and results in the formation of a mixture of beta-(1-->3) and beta-(1-->4) linkages. In contrast, disaccharide acceptors produce exclusively beta-(1-->4) linkages. Therefore, the presence of a glycosyl unit in subsite +II redirects regioselectivity from beta-(1-->3) to beta-(1-->4). To improve operational performance, the E383A mutant was immobilized on a Ni2+-chelating Sepharose resin. Immobilization did not increase stability to pH and organic solvents, but the operational stability and storage stability were clearly enhanced for recycling and scaling-up.

In vitro synthesis of a crystalline (1-->3,1-->4)-beta-D-glucan by a mutated (1-->3,1-->4)-beta-D-glucanase from Bacillus

Oligo- and poly-saccharides have a large number of important biological functions, and they occur in natural composite materials, such as plant cell walls, where they self-assemble during biosynthesis in a poorly understood manner. They can also be used for the formation of artificial composite materials with industrial applications. Fundamental and applied research in biology and nanobiotechnology would benefit from the possibility of synthesizing tailor-made oligo-/poly-saccharides. In the present paper, we demonstrate that such syntheses are possible using genetically modified glycoside hydrolases, i.e. glycosynthases. The ability of the endoglycosynthase derived from Bacillus (1-->3,1-->4)-beta-D-glucanase to catalyse self-condensation of sugar donors was exploited for the in vitro synthesis of a regular polysaccharide. The specificity of the enzyme allowed the polymerization of alpha-laminaribiosyl fluoride via the formation of (1-->4)-beta-linkages to yield a new linear crystalline (1-->3,1-->4)-beta-D-glucan with a repeating 4betaG3betaG unit. MS and methylation analyses indicated that the in vitro product consisted of a mixture of oligosaccharides, the one having a degree of polymerization of 12 being the most abundant. Morphological characterization revealed that the (1-->3,1-->4)-beta-D-glucan forms spherulites which are composed of platelet crystals. X-ray and electron diffraction analyses allowed the proposition of a putative crystallographic structure which corresponds to a monoclinic unit cell with a =0.834 nm, b =0.825 nm, c =2.04 nm and gamma=90.5 degrees. The dimensions of the ab plane are similar to those of cellulose I(beta), but the length of the c -axis is nearly twice that of cellulose I. It is proposed that four glucose residues are present in an extended conformation along the c -axis of the unit cell. The data presented show that glycosynthases represent promising enzymic systems for the synthesis of novel polysaccharides with specific and controlled structures, and for the analysis in vitro of the mechanisms of polymerization and crystallization of polysaccharides.

Hydrolase and glycosynthase activity of endo-1,3-beta-glucanase from the thermophile Pyrococcus furiosus

Pyrococcus furiosus laminarinase (LamA, PF0076) is an endo-glycosidase that hydrolyzes beta-1,3-glucooligosaccharides, but not beta-1,4-gluco-oligosaccharides. We studied the specificity of LamA towards small saccharides by using 4-methylumbelliferyl beta-glucosides with different linkages. Besides endo-activity, wild-type LamA has some exo-activity, and catalyzes the hydrolysis of mixed-linked oligosaccharides (Glcbeta4Glcbeta3Glcbeta-MU (Glc = glucosyl, MU = 4-methylumbelliferyl)) with both beta-1,4 and beta-1,3 specificities. The LamA mutant E170A had severely reduced hydrolytic activity, which is consistent with Glu170 being the catalytic nucleophile. The E170A mutant was active as a glycosynthase, catalyzing the condensation of alpha-laminaribiosyl fluoride to different acceptors. The best condensation yields were found at pH 6.5 and 50 degrees C, but did not exceed 30%. Depending on the acceptor, the synthase generated either a beta-1,3 or a beta-1,4 linkage.

Glycosynthase Activity of Bacillus licheniformis 1,3-1,4-β-Glucanase Mutants: Specificity, Kinetics, and Mechanism

Glycosynthases are engineered retaining glycosidases devoid of hydrolase activity that efficiently catalyze transglycosylation reactions. The mechanism of the glycosynthase reaction is probed with the E134A mutant of Bacillus licheniformis 1,3-1,4-beta-glucanase. This endo-glycosynthase is regiospecific for formation of a beta-1,4-glycosidic bond with alpha-glycosyl fluoride donors (laminaribiosyl as the minimal donor) and oligosaccharide acceptors containing glucose or xylose on the nonreducing end (aryl monosaccharides or oligosaccharides). The pH dependence of the glycosynthase activity reflects general base catalysis with a kinetic pK(a) of 5.2 +/- 0.1. Kinetics of enzyme inactivation by a water-soluble carbodiimide (EDC) are consistent with modification of an active site carboxylate group with a pK(a) of 5.3 +/- 0.2. The general base is Glu138 (the residue acting as the general acid-base in the parental wild-type enzyme) as probed by preparing the double mutant E134A/E138A. It is devoid of glycosynthase activity, but use of sodium azide as an acceptor not requiring general base catalysis yielded a beta-glycosyl azide product. The pK(a) of Glu138 (kinetic pK(a) on k(cat)/K(M) and pK(a) of EDC inactivation) for the E134A glycosynthase has dropped 1.8 pH units compared to the pK(a) values of the wild type, enabling the same residue to act as a general base in the glycosynthase enzyme. Kinetic parameters of the E134A glycosynthase-catalyzed condensation between Glcbeta4Glcbeta3GlcalphaF (2) as a donor and Glcbeta4Glcbeta-pNP (15) as an acceptor are as follows: k(cat) = 1.7 s(-)(1), K(M)(acceptor) = 11 mM, and K(M)(donor) < 0.3 mM. Donor self-condensation and elongation reactions are kinetically evaluated to establish the conditions for preparative use of the glycosynthase reaction in oligosaccharide synthesis. Yields are 70-90% with aryl monosaccharide and cellobioside acceptors, but 25-55% with laminaribiosides, the lower yields (and lower initial rates) due to competitive inhibition of the beta-1,3-linked disaccharide acceptor for the donor subsites of the enzyme.

Specificity studies of bacillus 1,3-1,4-beta-glucanases and application to glycosynthase-catalyzed transglycosylation

Bacillus 1,3-1,4-beta-glucanases hydrolyze 1,3-1,4-beta-gluco-oligosaccharides with a retaining mechanism. The binding-site cleft of these endoglycosidases is composed of six subsites (-4 to +2) of which subsite -3 makes the largest contribution to transition state stabilization. The specificity of this subsite is here analyzed for both glycosidase and glycosynthase activities in the wild-type and the nucleophile-less E134A mutant Bacillus licheniformis enzymes. A D-galactosyl residue on the nonreducing end of a trisaccharide substrate is accepted by the enzyme and binds at subsite -3 in the productive enzyme-substrate complex. The wild-type enzyme catalyzes the hydrolysis of the substrate Glcbeta4Glcbeta3GlcbetaMU (Glc=glucosyl, MU=4-methylumbelliferyl) with a k(cat)/K(M) value only 1.3-fold higher than for the Galbeta4Glcbeta3GlcbetaMU (Gal=galactosyl) substrate. The corresponding alpha-fluorides act as good donors for the glycosynthase condensation reaction with mono- and disaccharide acceptors catalyzed by the E134A mutant. Whereas self-condensation and elongation products are also obtained as minor compounds with the Glcbeta4Glcbeta3GlcalphaF donor, nearly quantitative yields of single condensation products are obtained with the Galbeta4Glcbeta3GlcalphaF donor, in which the axial configuration of the 4-OH group on the nonreducing end prevents self-condensation and elongation reactions.

Oligosaccharide synthesis by coupled endo-glycosynthases of different specificity: a straightforward preparation of two mixed-linkage hexasaccharide substrates of 1,3/1,4-beta-glucanases

Glycosynthases are engineered glycosidases which are hydrolytically inactive yet efficiently catalyse transglycosylation reactions of glycosyl fluoride donors, and are thus promising tools for the enzymatic synthesis of oligosaccharides. Two endo-glycosynthases, the E134A mutant of 1,3/1,4-beta-glucanase from Bacillus licheniformis and the E197A mutant of cellulase Cel7B from Humicola insolens, were used in coupled reactions for the stepwise synthesis of hexasaccharide substrates of 1,3/1,4-beta-glucanases. Because the two endo-glycosynthases show different specificity, towards laminaribiosyl and cellobiosyl donors, respectively, the target hexasaccharides were prepared by condensation of the corresponding disaccharide building blocks through sequential addition of the glycosynthases in a "one-pot" process. Different strategies were used to achieve the desired transglycosylation between donor and acceptor in each step, and to prevent unwanted elongation of the first condensation product and polymerization (self-condensation) of the donor: 1) selection of disaccharide donors differing in the configuration of the hydroxyl substituent normally acting as acceptor, 2) temporary protection of the polymerizable hydroxyl group of the donor, or 3) addition of an excess of acceptor to decrease the probability that the donor can act as an acceptor. The best procedure involved the condensation of alpha-lactosyl or 4II-O-tetrahydropyranyl-alpha-cellobiosyl fluorides with alpha-laminaribiosyl fluoride, catalyzed by E197A Cel7B, to give tetrasaccharide fluorides, which were then the donors for in situ condensation with methyl beta-cellobioside catalyzed by E134A 1,3/1,4-beta-glucanase. After isolation, the final hexasaccharides Gal/beta4Glcbeta4Glcbeta3Glcbeta4Glcbeta4Glcbeta-OMe and Glcbeta4Glcbeta4Glcbeta3Glcbeta4Glcbeta4-Glcbeta-OMe were obtained in 70-80% overall yields.