Exploring the potential role of tungsten carbide cobalt (WC-Co) nanoparticle internalization in observed toxicity toward lung epithelial cells in vitro

Antimicrobial Peptide Identified via Machine Learning Presents Both Potent Antibacterial Properties and Low Toxicity toward Human Cells

Preventing infection is a critical clinical challenge; however, the extensive use of antibiotics has resulted in remarkably increased antibiotic resistance. A variety of antibiotic alternatives including antimicrobial peptides (AMPs) have been studied. Unfortunately, like most conventional antibiotics, most current AMPs have shown significantly high toxicity toward the host, and therefore induce compromised host responses that may lead to negative clinical outcomes such as delayed wound healing. In this study, one of the AMPs with a short length of nine amino acids was first identified via machine learning to present potentially low cytotoxicity, and then synthesized and validated in vitro against both bacteria and mammalian cells. It was found that this short AMP presented strong and fast-acting antimicrobial properties against bacteria like Staphylococcus aureus, one of the most common bacteria clinically, and it targeted and depolarized bacterial membranes. This AMP also demonstrated significantly lower (e.g., 30%) toxicity toward mammalian cells like osteoblasts, which are important cells for new bone formation, compared to conventional antibiotics like gentamicin, vancomycin, rifampin, cefazolin, and fusidic acid at short treatment times (e.g., 2 h). In addition, this short AMP demonstrated relatively low toxicity, similar to osteoblasts, toward an epithelial cell line like BEAS-2B cells.

Tungsten contamination, behavior and remediation in complex environmental settings

Tungsten (W) is a rare element and present in the earth's crust mainly as iron, aluminium, and calcium minerals including wolframite and scheelite. This review aims to offer an overview on the current knowledge on W pollution in complex environmental settlings, including terrestrial and aquatic ecosystems, linking to its natural and anthropogenic sources, behavior in soil and water, environmental and human health hazards, and remediation strategies. Tungsten is used in many alloys mainly as wafers, which have wide industrial applications, such as incandescent light bulb filaments, X-ray tubes, arc welding electrodes, radiation shielding, and industrial catalysts. The rigidity and high density of W enable it to be suitable for defence applications replacing lead. In soil, W metal is oxidised to the tungstate anion and occurs in oxidation states from - 2 to + 6, with the most prevalent oxidation state of + 6. However, recently, people have been alerted to the risk posed by W alloys and its particulates, which can cause cancer and have other detrimental health effects in animals and humans. The population is subject to W pollution in the workplace by breathing, ingestion, and dermal contact. Remediation of W-polluted soil and aquatic environments can be accomplished via stabilization or solubilization. Stabilization of W in soil and groundwater using immobilizing agents inhibits the bioavailability of W, thereby preventing the contaminant from reaching the food chain, while solubilization of W in soil involving mobilizing materials accelerates the elimination of W via soil washing and root absorption. Future research opportunities covering risk-based remediation of W pollution in these complex settings are presented.

In vitro analysis of the cytotoxic effect of two different sizes ITER-like tungsten nanoparticles on human dermal fibroblasts

Background

Based on the current configuration of the International Thermonuclear Experimental Reactor, tungsten (W) was chosen as the armour material. Nevertheless, during operation, the expected power and temperature of plasma can trigger the formation of W dust in the plasma chamber. According to the scenario for a Loss Of Vacuum Accident (LOVA), in the case of confinement failure dust is released, which can lead to occupational or accidental exposure.

Methods

For a first evidence of potential risks, fusion devices relevant W dust has been produced on purpose, using a magnetron sputtering gas aggregation source. We aimed to assess the in vitro cytotoxicity of synthesized tungsten nanoparticles (W-NPs) with diameters of 30 and 100 nm, on human BJ fibroblasts. That was systematically investigated using different cytotoxic endpoints (metabolic activity, cellular ATP, AK release and caspase-3/7 activity) and by direct observation with optical and scanning electron microscopy.

Results

Increasing concentrations of W-NPs of both sizes induced cell viability decrease, but the effect was significantly higher for large W-NPs, starting from 200 μg/mL. In direct correlation with the effect on the cell membrane integrity, high concentrations of large W-NPs appear to increase AK release in the first 24 h of treatment. On the other hand, activation of the cellular caspase 3/7 was found significantly increased after 16 h of treatment solely for low concentrations of small W-NPs. SEM images revealed an increased tendency of agglomeration of small W-NPs in liquid medium, but no major differences in cells development and morphology were observed after treatment. An apparent internalization of nanoparticles under the cell membrane was also identified.

Conclusion

These results provide evidence for different toxicological outputs identified as mechanistic responses of BJ fibroblasts to different sizes of W-NPs, indicating also that small W-NPs (30 nm) display lower cytotoxicity compared to larger ones (100 nm).

Tungsten-based Nanomaterials in the Biomedical Field: A Bibliometric Analysis of Research Progress and Prospects

Tungsten-based nanomaterials (TNMs) with diverse nanostructures and unique physicochemical properties have been widely applied in the biomedical field. Although various reviews have described the application of TNMs in specific biomedical fields, there are still no comprehensive studies that summarize and analyze research trends of the field as a whole. To identify and further promote the development of biomedical TNMs, a bibliometric analysis method is used to analyze all relevant literature on this topic. First, general bibliometric distributions of the dataset by year, country, institute, referenced source, and research hotspots are recognized. Next, a comprehensive review of the subjectively recognized research hotspots in various biomedical fields, including biological sensing, anticancer treatments, antibacterials, and toxicity evaluation, is provided. Finally, the prospects and challenges of TNMs are discussed to provide a new perspective for further promoting their development in biomedical research.

Nanomaterial-assisted theranosis of bone diseases

Bone-related diseases refer to a group of skeletal disorders that are characterized by bone and cartilage destruction. Conventional approaches can regulate bone homeostasis to a certain extent. However, these therapies are still associated with some undesirable problems. Fortunately, recent advances in nanomaterials have provided unprecedented opportunities for diagnosis and therapy of bone-related diseases. This review provides a comprehensive and up-to-date overview of current advanced theranostic nanomaterials in bone-related diseases. First, the potential utility of nanomaterials for biological imaging and biomarker detection is illustrated. Second, nanomaterials serve as therapeutic delivery platforms with special functions for bone homeostasis regulation and cellular modulation are highlighted. Finally, perspectives in this field are offered, including current key bottlenecks and future directions, which may be helpful for exploiting nanomaterials with novel properties and unique functions. This review will provide scientific guidance to enhance the development of advanced nanomaterials for the diagnosis and therapy of bone-related diseases.

Tungsten toxicity and carcinogenesis

Tungsten is an emerging contaminant in the environment. Research has demonstrated that humans are exposed to high levels of tungsten in certain settings, primarily due to increased use of tungsten in industrial applications. However, our understanding of the potential human health risks of tungsten exposure is still limited. An important point we have learned about the toxicity profile of tungsten is that it is complex because tungsten can often augment the effects of other co-exposures or co-stressors, which could result in greater toxicity or more severe disease. This has shaped the tungsten toxicology field and the types of research questions being investigated. This has particularly been true when evaluating the toxicity profile of tungsten metal alloys in combination with cobalt. In this chapter, the current state of the tungsten toxicology field will be discussed focusing on data investigating tungsten carcinogenicity and other major toxicities including pulmonary, cardiometabolic, bone, and immune endpoints, either alone or in combination with other metals. Environmental and human monitoring data will also be discussed to highlight human populations most at risk of exposure to high concentrations of tungsten, the forms of tungsten present in each setting, and exposure levels in each population.

Mechanisms of cell injury induced by inhaled molybdenum trioxide nanoparticles in Golden Syrian Hamsters

Molybdenum trioxide nanoparticles (MoO₃ NPs) are extensively used in the biomedical, agricultural, and engineering fields that may increase exposure and adverse health effects to the human population. The purpose of this study is to evaluate a possible molecular mechanism leading to cell damage and death following pulmonary exposure to inhaled MoO₃ NPs. Animals were separated into four groups: two control groups exposed to room air or aerosolized water and two treated groups exposed to aerosolized MoO₃ NPs with a concentration of 5 mg/m³ NPs (4 h/day for eight days) and given a one-day (T-1) or seven-day (T-7) recovery period post exposure. Pulmonary toxicity was evaluated with total and differential cell counts. Increases were seen in total cell numbers, neutrophils, and multinucleated macrophages in the T-1 group, with increases in lymphocytes in the T-7 group (*P < 0.05). To evaluate the mechanism of toxicity, protein levels of Beclin-1, light chain 3 (LC3)-I/II, P-62, cathepsin B, NLRP3, ASC, caspase-1, interleukin (IL)-1β, and tumor necrosis factor-α (TNF-α) were assessed in lung tissue. Immunoblot analyses indicated 1.4- and 1.8-fold increases in Beclin-1 in treated groups (T-1 and T-7, respectively, *P < 0.05), but no change in protein levels of LC3-I/II in either treated group. The levels of cathepsin B were 2.8- and 2.3-fold higher in treated lungs (T-1 and T-7, respectively, *P < 0.05), the levels of NLRP3 had a fold increase of 2.5 and 3.6 (T-1 *P < 0.05, T-7 **P < 0.01, respectively), and the levels of caspase-1 indicated a 3.8- and 3.0-fold increase in treated lungs (T-1 and T-7, respectively, *P < 0.05). Morphological changes were studied using light and electron microscopy showing alterations to airway epithelium and the alveoli, along with particle internalization in macrophages. The results from this study may indicate that inhalation exposure to MoO₃ NPs may interrupt the autophagic flux and induce cytotoxicity and lung injury through pyroptosis cell death and activation of caspase-1.

PTX3 alleviates hard metal-induced acute lung injury through potentiating efferocytosis

Prolonged exposure to hard metal dust results in hard metal lung disease (HMLD) characterized by respiratory symptoms. Understanding the pathogenesis and pathological process of HMLD would be helpful for its early diagnosis and treatment. In this study, we established a mouse model of hard metal-induced acute lung injury through one-time intratracheal instillation of WC-Co dust suspension. We found that WC-Co treatment damaged the lungs of mice, leading to increased production of IL-1β, TNF-α, IL-6 and IL-18, inflammatory cells infiltration and apoptosis. In vitro, WC-Co induced cytotoxicity, inflammatory response and apoptosis in macrophages (PMA-treated THP-1) and epithelial cells (A549) in a dose-dependent manner. Moreover, RNA-sequence and validation experiments verified that Pentraxin 3 (PTX3), an important mediator in the regulation of inflammation, was elevated both in vivo and in vitro induced by WC-Co. Functional experiments confirmed the PTX3, which was located on the membrane of apoptotic cells, promoted macrophage efferocytosis efficiently. This progress could help block the lung inflammation and contribute to the rapid recovery of WC-Co-induced acute lung injury. These observations provide a further understanding of the molecular mechanism of WC-Co-induced pulmonary injury and disclose PTX3 as a new potential therapeutic approach to relieve WC-Co-induced acute lung injury via efferocytosis.

Toxicity assessment of industrial engineered and airborne process-generated nanoparticles in a 3D human airway epithelial in vitro model

The advanced ceramic technology has been pointed out as a potentially relevant case of occupational exposure to nanoparticles (NP). Not only when nanoscale powders are being used for production, but also in the high-temperature processing of ceramic materials there is also a high potential for NP release into the workplace environment. In vitro toxicity of engineered NP (ENP) [antimony tin oxide (Sb₂O₃•SnO₂; ATO); zirconium oxide (ZrO₂)], as well as process-generated NP (PGNP), and fine particles (PGFP), was assessed in MucilAir™ cultures at air-liquid interface (ALI). Cultures were exposed during three consecutive days to varying doses of the aerosolized NP. General cytotoxicity [lactate dehydrogenase (LDH) release, WST-1 metabolization], (oxidative) DNA damage, and the levels of pro-inflammatory mediators (IL-8 and MCP-1) were assessed. Data revealed that ENP (5.56 µg ATO/cm² and 10.98 µg ZrO₂/cm²) only caused mild cytotoxicity at early timepoints (24 h), whereas cells seemed to recover quickly since no significant changes in cytotoxicity were observed at late timepoints (72 h). No meaningful effects of the ENP were observed regarding DNA damage and cytokine levels. PGFP affected cell viability at dose levels as low as ∼9 µg/cm², which was not seen for PGNP. However, exposure to PGNP (∼4.5 µg/cm²) caused an increase in oxidative DNA damage. These results indicated that PGFP and PGNP exhibit higher toxicity potential than ENP in mass per area unit. However, the presence of a mucociliary apparatus, as it occurs in vivo as a defense mechanism, seems to considerably attenuate the observed toxic effects. Our findings highlight the potential hazard associated with exposure to incidental NP in industrial settings.

Nanomaterial-based scaffolds for bone tissue engineering and regeneration

The global incidence of bone tissue injuries has been increasing rapidly in recent years, making it imperative to develop suitable bone grafts for facilitating bone tissue regeneration. It has been demonstrated that nanomaterials/nanocomposites scaffolds can more effectively promote new bone tissue formation compared with micromaterials. This may be attributed to their nanoscaled structural and topological features that better mimic the physiological characteristics of natural bone tissue. In this review, we examined the current applications of various nanomaterial/nanocomposite scaffolds and different topological structures for bone tissue engineering, as well as the underlying mechanisms of regeneration. The potential risks and toxicity of nanomaterials will also be critically discussed. Finally, some considerations for the clinical applications of nanomaterials/nanocomposites scaffolds for bone tissue engineering are mentioned.

Silver nanoparticles present high intracellular and extracellular killing against Staphylococcus aureus

OBJECTIVES

Bone and joint infections caused by Staphylococcus aureus are becoming increasingly difficult to treat due to rising antibiotic resistance, resilient biofilms and intracellular survival of S. aureus. It has been challenging to identify and develop antimicrobial agents that can be used to kill extracellular and intracellular bacteria while having limited toxicity towards host cells. In addressing this challenge, this study investigates the antimicrobial efficacy and toxicity of silver nanoparticles (AgNPs).

METHODS

Intracellular bacteria were generated using a co-culture model of human osteoblast cells and S. aureus. Extracellular and intracellular S. aureus were treated with AgNPs, antibiotics and their combinations, and numbers of colonies were quantified. Toxicity of AgNPs against human osteoblast cells was determined by quantifying the number of viable cells after treatment.

RESULTS

AgNPs demonstrated excellent antimicrobial activity against extracellular S. aureus with a 100% killing efficacy at concentrations as low as 56 μM, along with a high intracellular killing efficacy of 76% at 371 μM. AgNPs were non-toxic or slightly toxic towards human osteoblasts at the concentrations studied (up to 927 μM). Moreover, smaller-sized (40 nm) AgNPs were more efficacious in killing bacteria compared with their larger-sized (100 nm) counterparts and synergistic antimicrobial effects against extracellular bacteria were observed when AgNPs were combined with gentamicin.

CONCLUSIONS

AgNPs and their combination with antibiotics have demonstrated high extracellular and intracellular bacterial killing and presented unique aspects for potential clinical applications, especially for chronic and recurrent infections where intracellular bacteria may be the cause.

Toxicological Assessment of ITER-Like Tungsten Nanoparticles Using an In Vitro 3D Human Airway Epithelium Model

The International Thermonuclear Experimental Reactor (ITER) is an international project aimed at the production of carbon-free energy through the use of thermonuclear fusion. During ITER operation, in case of a loss-of-vacuum-accident, tungsten nanoparticles (W-NPs) could potentially be released into the environment and induce occupational exposure via inhalation. W-NPs toxicity was evaluated on MucilAir™, a 3D in vitro cell model of the human airway epithelium. MucilAir™ was exposed for 24 h to metallic ITER-like milled W-NPs, tungstate (WO₄²⁻) and tungsten carbide cobalt particles alloy (WC-Co). Cytotoxicity and its reversibility were assessed using a kinetic mode up to 28 days after exposure. Epithelial tightness, metabolic activity and interleukin-8 release were also evaluated. Electron microscopy was performed to determine any morphological modification, while mass spectrometry allowed the quantification of W-NPs internalization and of W transfer through the MucilAir™. Our results underlined a decrease in barrier integrity, no effect on metabolic activity or cell viability and a transient increase in IL-8 secretion after exposure to ITER-like milled W-NPs. These effects were associated with W-transfer through the epithelium, but not with intracellular accumulation. We have shown that, under our experimental conditions, ITER-like milled W-NPs have a minor impact on the MucilAir™ in vitro model.

In Vitro Analysis of the Effects of ITER-Like Tungsten Nanoparticles: Cytotoxicity and Epigenotoxicity in BEAS-2B Cells

Tungsten was chosen as a wall component to interact with the plasma generated by the International Thermonuclear Experimental fusion Reactor (ITER). Nevertheless, during plasma operation tritiated tungsten nanoparticles (W-NPs) will be formed and potentially released into the environment following a Loss-Of-Vacuum-Accident, causing occupational or accidental exposure. We therefore investigated, in the bronchial human-derived BEAS-2B cell line, the cytotoxic and epigenotoxic effects of two types of ITER-like W-NPs (plasma sputtering or laser ablation), in their pristine, hydrogenated, and tritiated forms. Long exposures (24 h) induced significant cytotoxicity, especially for the hydrogenated ones. Plasma W-NPs impaired cytostasis more severely than the laser ones and both types and forms of W-NPs induced significant micronuclei formation, as shown by cytokinesis-block micronucleus assay. Single DNA strand breaks, potentially triggered by oxidative stress, occurred upon exposure to W-NPs and independently of their form, as observed by alkaline comet assay. After 24 h it was shown that more than 50% of W was dissolved via oxidative dissolution. Overall, our results indicate that W-NPs can affect the in vitro viability of BEAS-2B cells and induce epigenotoxic alterations. We could not observe significant differences between plasma and laser W-NPs so their toxicity might not be triggered by the synthesis method.

Manufacturing and Characterization of Zn-WC as Potential Biodegradable Material

This work presents the manufacturing and characterization of zinc-tungsten carbide (Zn-WC) nanocomposite as a potential biodegradable material. A highly homogeneous WC nanoparticle dispersion in a Zn matrix was achieved by molten salt assisted stir casting followed with hot rolling. The Vickers microhardness and ultimate tensile strength of zinc were enhanced more than 50% and 87%, respectively, with the incorporation of up to 4.4 vol. % WC nanoparticles. Additionally, Zn-WC nanocomposite retained high ductility (> 65%). However, the electrical and thermal conductivities were reduced by 12% and 21%, respectively. The significant enhancement in mechanical strength makes nanoparticle-reinforced zinc a promising candidate material for biodegradable metallic implants for a wide range of clinical applications, including orthopaedic and cardiovascular implants as well as bioresorbable electronics.

Comparative Assessment of Tungsten Toxicity in the Absence or Presence of Other Metals

Tungsten is a refractory metal that is used in a wide range of applications. It was initially perceived that tungsten was immobile in the environment, supporting tungsten as an alternative for lead and uranium in munition and military applications. Recent studies report movement and detection of tungsten in soil and potable water sources, increasing the risk of human exposure. In addition, experimental research studies observed adverse health effects associated with exposure to tungsten alloys, raising concerns on tungsten toxicity with questions surrounding the safety of exposure to tungsten alone or in mixtures with other metals. Tungsten is commonly used as an alloy with nickel and cobalt in many applications to adjust hardness and thermal and electrical conductivity. This review addresses the current state of knowledge in regard to the mechanisms of toxicity of tungsten in the absence or presence of other metals with a specific focus on mixtures containing nickel and cobalt, the most common components of tungsten alloy.

Fate and Effect of Nano Tungsten Carbide Cobalt (WCCo) in the Soil Environment: Observing a Nanoparticle Specific Toxicity in Enchytraeus crypticus

Tungsten carbide cobalt (WCCo) nanoparticles (NPs) are widely used in hard metal industries. Pulmonary diseases and risk of cancer are associated with occupational exposure, but knowledge about the environmental fate and effects is virtually absent. In this study, the fate and effects of crystalline WCCo NPs, WC, and Co²⁺ were assessed in the soil model Enchytraeus crypticus, following the standard Enchytraeid Reproduction Test (ERT). An additional 28 day exposure period compared to the ERT (i.e., a total of 56 days) was performed to assess longer-term effects. WCCo NPs affected reproduction at a concentration higher than the corresponding Co based (EC50 = 1500 mg WCCo/kg, equivalent to 128 mg Co/kg). WC showed no negative effect up to 1000 mg W/kg. Maximum uptake of Co was 10-fold higher for CoCl₂ compared to WCCo exposed organisms. Overall toxicity seems to be due to a combined effect between WC and Co. This is supported by the soil bioavailable fraction and biological tissue measurements. Last, results highlight the need to consider longer exposure period of NPs for comparable methods standardized for conventional chemicals.

Tungsten: an Emerging Toxicant, Alone or in Combination

PURPOSE OF REVIEW

Tungsten is an emerging environmental toxicant, yet our understanding of the potential risks of exposure on human health is still limited.

RECENT FINDINGS

In this review, we will discuss populations most at risk of exposure to high concentrations of tungsten. In addition, we will highlight what is known about the toxicity profile of tungsten compounds, based on epidemiological, in vitro, and in vivo studies, focusing on bone, immune, pulmonary, and cancer outcomes. Of note, emerging evidence indicates that tungsten can augment the effects of other stimulants, stressors, and toxicants. Of particular importance may be tungsten-cobalt mixtures that seem to be more toxic than either metal alone. This is important because it means that we cannot just evaluate the toxicity of tungsten in isolation. Finally, we still have limited information of how many of the in vitro and in vivo findings translate to human populations, so it will be important to conduct epidemiology studies in highly exposed populations to adequately address the potential risks of tungsten exposure on human health. Together, we discuss recent findings that support further investigation into the toxicities of tungsten alone and in combination with other metals.

Toxicogenomic responses of human alveolar epithelial cells to tungsten boride nanoparticles

During the recent years, microarray analysis of gene expression has become an inevitable tool for exploring toxicity of drugs and other chemicals on biological systems. Therefore, toxicogenomics is considered as a fruitful area for searching cellular pathways and mechanisms including cancer, immunological diseases, environmental responses, gene-gene interactions and chemical toxicity. In this work, we examined toxic effects of Tungsten Borides NPs on gene expression profiling of the human lung alveolar epithelial cells (HPAEpiC). In line with this purpose, a single crystal of tungsten boride (mixture of WB and W₂B) nanoparticles was synthesized by means of zone melting method, and characterized via using X-ray crystallography (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDX) techniques. Cell viability and cytotoxicity were determined by 3-(4,5-dimethyl-thiazol-2-yl) 2,5-diphenyltetrazolium bromide (MTT), neutral red (NR) and lactate dehydrogenase (LDH) release tests. The whole genome microarray expression analysis was performed to find out the effects of WB and W₂B NPs mixture on gene expression of the HPAEpiC cell culture. 123 of 40,000 gene probes were assigned to characterize expression profile for WB/W2B NPs exposure. According to results; 70 genes were up-regulated and 53 genes were down-regulated (≥2 fold change). For further investigations, these genes were functionally classified by using DAVID (The Database for Annotation, Visualization and Integrated Discovery) with gene ontology (GO) analysis. In the light of the data gained from this study, it could be concluded that the mixture of WB/W2B NPs can affect cytokine/chemokine metabolism, angiogenesis and prevent migration/invasion by activating various genes.

N-acetylcysteine Attenuates Cobalt Nanoparticle-Induced Cytotoxic Effects through Inhibition of Cell Death, Reactive Oxygen Species-related Signaling and Cytokines Expression

OBJECTIVE

Complex cobalt-chromium alloys, bearing surfaces of the second-generation metal-on-metal (MoM) hip prostheses, are subject to wear and generate cobalt nanoparticles (CoNPs). CoNPs could reduce cellular viability, activate the mitogen-activated protein kinase (MAPK) pathway and increase cell apoptosis via reactive oxygen species (ROS). However, the detailed mechanisms of ROS functioning on CoNP-mediated signaling molecules and cytotoxicity has not yet been fully demonstrated. The present study investigated the functional role of N-acetylcysteine (NAC) in reversing the activation of ROS signaling pathways triggered by CoNPs in normal mice kidney cells (TCMK-1 cells).

METHODS

After being pretreated with NAC, TCMK-1 cells were treated with 300-700 μmol/L CoNPs, then, CCK-8 assay was used to verify the survival of TCMK-1 cells. Annexin V/PI staining was performed to investigate the apoptosis of TCMK-1 cells after NAC and different concentrations of CoNP treatments. In addition, western blot was performed to identify the cytokine (p-ERK, p-p38, and p-JNK) expression of the ROS-related MAPK signaling pathway.

RESULTS

Apoptosis rate of TCMK-1 cells was increased obviously after different concentrations of CoNP treatment. However, TCMK-1 cells, pretreated with NAC, exhibited a significantly decreased apoptosis rate. In addition, p-ERK, p-p38, and p-JNK expressions were increased with CoNP treatment, which indicated that CoNPs could activate the MAPK pathway. Interestingly, this entire stimulated phenomenon by CoNPs was reversed with NAC treatment.

CONCLUSIONS

These findings indicated that NAC could reverse CoNP-induced cytotoxicity by inhibiting ROS-induced cell death and cytokine expression. To our knowledge, this is the first report that describes how CoNP-induced cytotoxicity in TCMK-1 cells could be attenuated by anti-oxidative agents (NAC), which may function through inhibition of cell death and ROS.

Toxicity and oxidative stress responses induced by nano- and micro-CoCrMo particles

Particles on the nano- and micro-meter scales present unique cell-specific cellular effects (i.e.cytotoxicity and oxidative stress).

Nanotoxicity: emerging concerns regarding nanomaterial safety and occupational hard metal (WC-Co) nanoparticle exposure

As the number of commercial and consumer products containing engineered nanomaterials (ENMs) continually rises, the increased use and production of these ENMs presents an important toxicological concern. Although ENMs offer a number of advantages over traditional materials, their extremely small size and associated characteristics may also greatly enhance their toxic potentials. ENM exposure can occur in various consumer and industrial settings through inhalation, ingestion, or dermal routes. Although the importance of accurate ENM characterization, effective dosage metrics, and selection of appropriate cell or animal-based models are universally agreed upon as important factors in ENM research, at present, there is no “standardized” approach used to assess ENM toxicity in the research community. Of particular interest is occupational exposure to tungsten carbide cobalt (WC-Co) “dusts,” composed of nano- and micro-sized particles, in hard metal manufacturing facilities and mining and drilling industries. Inhalation of WC-Co dust is known to cause “hard metal lung disease” and an increased risk of lung cancer; however, the mechanisms underlying WC-Co toxicity, the inflammatory disease state and progression to cancer are poorly understood. Herein, a discussion of ENM toxicity is followed by a review of the known literature regarding the effects of WC-Co particle exposure. The risk of WC-Co exposure in occupational settings and the updates of in vitro and in vivo studies of both micro- and nano-WC-Co particles are discussed.

In vitro inflammatory effects of hard metal (WC-Co) nanoparticle exposure

Identifying the toxicity of nanoparticles (NPs) is an important area of research as the number of nanomaterial-based consumer and industrial products continually rises. In addition, the potential inflammatory effects resulting from pulmonary NP exposure are emerging as an important aspect of nanotoxicity. In this study, the toxicity and inflammatory state resulting from tungsten carbide–cobalt (WC–Co) NP exposure in macrophages and a coculture (CC) of lung epithelial cells (BEAS-2B) and macrophages (THP-1) at a 3:1 ratio were examined. It was found that the toxicity of nano-WC–Co was cell dependent; significantly less toxicity was observed in THP-1 cells compared to BEAS-2B cells. It was demonstrated that nano-WC–Co caused reduced toxicity in the CC model compared to lung epithelial cell monoculture, which suggested that macrophages may play a protective role against nano-WC–Co-mediated toxicity in CCs. Nano-WC–Co exposure in macrophages resulted in increased levels of interleukin (IL)-1β and IL-12 secretion and decreased levels of tumor necrosis factor alpha (TNFα). In addition, the polarizing effects of nano-WC–Co exposure toward the M1 (pro-inflammatory) and M2 (anti-inflammatory) macrophage phenotypes were investigated. The results of this study indicated that nano-WC–Co exposure stimulated the M1 phenotype, marked by high expression of CD40 M1 macrophage surface markers.

Dust and Cobalt Levels in the Austrian Tungsten Industry: Workplace and Human Biomonitoring Data

In general, routine industrial hygiene (IH) data are collected not to serve for scientific research but to check for compliance with occupational limit values. In the preparation of an occupational retrospective cohort study it is vital to test the validity of the exposure assessment based on incomplete (temporal coverage, departments) IH data. Existing IH data from a large hard metal plant was collected. Individual workers’ exposure per year and department was estimated based on linear regression of log-transformed exposure data for dust, tungsten, and cobalt. Estimated data were back-transformed, and for cobalt the validity of the estimates was confirmed by comparison with individual cobalt concentrations in urine. Air monitoring data were available from 1985 to 2012 and urine tests from the years 2008 to 2014. A declining trend and significant differences among departments was evident for all three air pollutants. The estimated time trend fitted the time trend in urine values well. At 1 mg/m³, cobalt in the air leads to an excretion of approximately 200 µg/L cobalt in urine. Cobalt levels in urine were significantly higher in smokers with an interaction effect between smoking and air concentrations. Exposure estimates of individual workers are generally feasible in the examined plant, although some departments are not documented sufficiently enough. Additional information (expert knowledge) is needed to fill these gaps.

Biological and environmental interactions of emerging two-dimensional nanomaterials

Two-dimensional materials have become a major focus in materials chemistry research worldwide with substantial efforts centered on synthesis, property characterization, and technological application. These high-aspect ratio sheet-like solids come in a wide array of chemical compositions, crystal phases, and physical forms, and are anticipated to enable a host of future technologies in areas that include electronics, sensors, coatings, barriers, energy storage and conversion, and biomedicine. A parallel effort has begun to understand the biological and environmental interactions of synthetic nanosheets, both to enable the biomedical developments and to ensure human health and safety for all application fields. This review covers the most recent literature on the biological responses to 2D materials and also draws from older literature on natural lamellar minerals to provide additional insight into the essential chemical behaviors. The article proposes a framework for more systematic investigation of biological behavior in the future, rooted in fundamental materials chemistry and physics. That framework considers three fundamental interaction modes: (i) chemical interactions and phase transformations, (ii) electronic and surface redox interactions, and (iii) physical and mechanical interactions that are unique to near-atomically-thin, high-aspect-ratio solids. Two-dimensional materials are shown to exhibit a wide range of behaviors, which reflect the diversity in their chemical compositions, and many are expected to undergo reactive dissolution processes that will be key to understanding their behaviors and interpreting biological response data. The review concludes with a series of recommendations for high-priority research subtopics at the "bio-nanosheet" interface that we hope will enable safe and successful development of technologies related to two-dimensional nanomaterials.

Tungsten Carbide-Cobalt Nanoparticles Induce Reactive Oxygen Species, AKT, ERK, AP-1, NF-κB, VEGF, and Angiogenesis

Powder mixtures of tungsten carbide and metallic cobalt (WC-Co) are widely used in various products. Nanoparticles are engineered structures with at least one dimension of 100 nm or smaller. WC-Co is known to be associated with lung injury and diseases. Angiogenesis is a key process during vasculature, carcinogenesis, recovery of injury, and inflammatory diseases. However, the cellular effects of WC-Co nanoparticles on angiogenesis remain to be elucidated. In this study, we investigated angiogenic response and relative mechanisms after exposure to WC-Co nanoparticles. Our results showed that WC-Co nanoparticles at 5 μg/cm(2) induced ROS production which activated AKT and ERK1/2 signaling pathways in lung epithelial cells by reactive oxygen species (ROS) staining and immunoblotting; WC-Co treatment also increased transcriptional activation of AP-1, NF-κB, and VEGF by reporter assay. Further studies demonstrated that ROS are upstream molecules of AKT and ERK signaling pathways; the activation of AP-1, NF-κB, and VEGF was through ROS generation, AKT and ERK1/2 activation. In addition, WC-Co nanoparticles affected the cells to induce angiogenesis by chicken chorioallantoic membrane (CAM) assay. These results illustrate that exposure to WC-Co nanoparticles induces angiogenic response by activating ROS, AKT, and ERK1/2 signaling pathways and the downstream molecules and elucidate the potential molecular mechanisms during this process. This information may be useful for preventing potential damage from nanoparticle exposure in the future.

Self-assembly dynamics and accumulation mechanisms of ultra-fine nanoparticles

The self-assembly of nanomaterials into three-dimensional hierarchical structures is a fundamental step impacting a large number of synthetic and natural processes. These range from the scalable fabrication of nano-devices such as batteries, sensors and third generation solar cells to the uptake and accumulation of particulate pollution in the lung alveoli. Here, we show that the Dynamic behavior of ultra-fine particles (UFP < 100 nm) diverges significantly from that of sub- and micro equivalents. For freely diffusing bodies, this leads to the formation of stochastically reproducible films that approach the morphology and density of ballistically deposited ones. A novel deposition mechanism and regime are proposed that successfully capture the full spectrum of size-dependent self-assembly dynamics. These findings are a significant step toward the engineering of scalable parallel nano-fabrication approaches, and the understanding of the interaction of unbound nanostructures with their surrounding.

NiO nanoparticles induce apoptosis through repressing SIRT1 in human bronchial epithelial cells

With application of nano-sized nickel-containing particles (Nano-Ni) expanding, the health concerns about their adverse effects on the pulmonary system are increasing. However, the mechanisms for the pulmonary toxicity of these materials remain unclear. In the present study, we focused on the impacts of NiO nanoparticles (NiONPs) on sirtuin1 (SIRT1), a NAD-dependent deacetylase, and investigated whether SIRT1 was involved in NiONPs-induced apoptosis. Although the NiONPs tended to agglomerate in fluid medium, they still entered into the human bronchial epithelial cells (BEAS-2B) and released Ni(2+) inside the cells. NiONPs at doses of 5, 10, and 20μg/cm(2) inhibited the cell viability. NiONPs' produced cytotoxicity was demonstrated through an apoptotic process, indicated by increased numbers of Annexin V positive cells and caspase-3 activation. The expression of SIRT1 was markedly down-regulated by the NiONPs, accompanied by the hyperacetylation of p53 (tumor protein 53) and overexpression of Bax (Bcl-2-associated X protein). However, overexpression of SIRT1 through resveratrol treatment or transfection clearly attenuated the NiONPs-induced apoptosis and activation of p53 and Bax. Our results suggest that the repression of SIRT1 may underlie the NiONPs-induced apoptosis via p53 hyperacetylation and subsequent Bax activation. Because SIRT1 participates in multiple biologic processes by deacetylation of dozens of substrates, this knowledge of the impact of NiONPs on SIRT1 may lead to an improved understanding of the toxic mechanisms of Nano-Ni and provide a molecular target to antagonize Nano-Ni toxicity.

Acute inflammatory responses of nanoparticles in an intra-tracheal instillation rat model

Exposure to hard metal tungsten carbide cobalt (WC-Co) "dusts" in enclosed industrial environments is known to contribute to the development of hard metal lung disease and an increased risk for lung cancer. Currently, the influence of local and systemic inflammation on disease progression following WC-Co exposure remains unclear. To better understand the relationship between WC-Co nanoparticle (NP) exposure and its resultant effects, the acute local pulmonary and systemic inflammatory responses caused by WC-Co NPs were explored using an intra-tracheal instillation (IT) model and compared to those of CeO2 (another occupational hazard) NP exposure. Sprague-Dawley rats were given an IT dose (0-500 μg per rat) of WC-Co or CeO2 NPs. Following 24-hr exposure, broncho-alveolar lavage fluid and whole blood were collected and analyzed. A consistent lack of acute local pulmonary inflammation was observed in terms of the broncho-alveolar lavage fluid parameters examined (i.e. LDH, albumin, and macrophage activation) in animals exposed to WC-Co NP; however, significant acute pulmonary inflammation was observed in the CeO2 NP group. The lack of acute inflammation following WC-Co NP exposure contrasts with earlier in vivo reports regarding WC-Co toxicity in rats, illuminating the critical role of NP dose and exposure time and bringing into question the potential role of impurities in particle samples. Further, we demonstrated that WC-Co NP exposure does not induce acute systemic effects since no significant increase in circulating inflammatory cytokines were observed. Taken together, the results of this in vivo study illustrate the distinct differences in acute local pulmonary and systemic inflammatory responses to NPs composed of WC-Co and CeO2; therefore, it is important that the outcomes of pulmonary exposure to one type of NPs may not be implicitly extrapolated to other types of NPs.