Speciation of As(III) and As(V) in water samples by graphite furnace atomic absorption spectrometry after solid phase extraction combined with dispersive liquid-liquid microextraction based on the solidification of floating organic drop

Acid-based deep eutectic solvents followed by GFAAS for the speciation of As(III), As(V), total inorganic arsenic and total arsenic in rice samples

In the present study, an efficacious, safe, inexpensive and eco-friendly microextraction was provided by deep eutectic solvents based on dispersive liquid-liquid microextraction (DLLME - DES) followed by GFAAS. A series of DESs were synthesised using l-menthol as hydrogen bond acceptor (HBA) and carboxylic acids with 4, 6, 8 and 10 carbon atoms as hydrogen bond donors (HBD). The synthesised DESs were used as extractants of arsenic ions. Under optimised conditions, good linearity with coefficient of determination (r2) 0.992 and an acceptable linear range of 0.3-100 µg kg-1 was obtained. The limit of detection was 0.1 µg kg-1 (S/N = 3) for arsenite (As(III)) ions, and a high enrichment factor (EF = 200) was obtained. The enhancement factor and extraction recovery (ER%) of the method were 340 and 60%, respectively. RSDs including inter- and intra-day ranged from 3.2% to 5.8% in three examined concentrations. After a specific digestion, the capability of the synthesised DES in the extraction of As(III) from rice was tested. Total inorganic arsenic was separated similarly after reduction of arsenate (As(V)) to As(III), and As(V) concentration was calculated by difference. Using a second digestion method, total arsenic concentration (sum of organic and inorganic arsenic) in the samples was determined.

Switchable hydrophilicity solvent-assisted solidified floating organic drop microextraction for separation and determination of arsenic in water and fish samples

The aim of the current study was to separate and determine arsenic in water and fish samples using a novel and green solidified floating organic drop microextraction (SFODME), which is based on switchable hydrophilicity solvent (SHS)-assisted procedure followed by hydride generation atomic absorption spectrometry (HG-AAS). The 4-((2-hydroxyquinoline-7-yl)diazenyl)-N-(4-methylisoxazol-3-yl)benzene sulfonamide (HDNMBA) and tertiary amine (4-(2-aminoethyl)-N,N-dimethylbenzylamine (AADMBA) were used as ligand and SHS, respectively. The use of SHS promotes quantitative extraction of arsenic complexes into an extraction solvent (1-undecanol). Some factors that impact extraction recovery were studied. Under optimal conditions, the limit of detection (LOD) and limit of quantification (LOQ) were 0.005 μg L-1 and 0.015 μg L-1, respectively. The calibration graph was linear up to 900.0 μg L-1 arsenic, with the enrichment factor is 267. The proposed SHS-SFODME methodology for arsenic quantification in water and fish samples was successfully implemented. The environmental friendliness and safety of proposed method were approved by the Analytical Greenness Calculator (AGREE) and the Blue Applicability Grade Index (BAGI) tools.

Arsenic speciation by using emerging sample preparation techniques: a review

Arsenic is a hazardous element that causes environmental pollution. Due to its toxicological effects, it is crucial to quantify and minimize the hazardous impact on the ecology. Despite the significant advances in analytical techniques, sample preparation is still crucial for determining target analytes in complex matrices. Several factors affect the direct analysis, such as trace-level analysis, advanced regulatory requirements, complexity of sample matrices, and incompatible with analytical instrumentation. Along with the development in the sample preparation process, microextraction methods play an essential role in the sample preparation process. Microextraction techniques (METs) are the newest green approach that replaces traditional sample preparation and preconcentration methods. METs have minimized the limitation of conventional sample preparation methods while keeping all their benefits. METs improve extraction efficacy, are fast, automated, use less amount of solvents, and are suitable for the environment. Microextraction techniques with less solvent consumption, such as solid phase microextraction (SPME) solvent-free methods, and liquid phase microextraction (LPME), are widely used in modern analytical procedures. SPME development focuses on synthesizing new sorbents and applying online sample preparation, whereas LPME research investigates the utilization of new solvents.

Non-carcinogenic risk assessment of exposure to heavy metals in underground water resources in Saraven, Iran: Spatial distribution, monte-carlo simulation, sensitive analysis

Groundwater aquifers are considered the second most abundant water supply for drinking water all over the world. In Iran, ground waters are commonly employed for drinking water, irrigation, and industrial purposes. Heavy metals (HMs) pose human concerns about the groundwater contamination; these pollutants are recognized to be capable of bio-accumulation, long persistence in the natural environment, and toxic effects. In the present research, the content of HMs: Chromium (Cr), Cadmium (Cd), and Lead (Pb) were detected in 89 water samples collected in 2018 by underground water supplies (active wells) of Saravan city. Hazard Quotient (HQ) and Monte Carlo Simulation approach with 10,000 repetitions were applied to discover the human non-carcinogenic impacts of HMs in four groups of ages (adults, teenagers, children, and infants) of consumers. The concentrations of Cr, Pb, and Cd were in the range of 0.49-20, 0.1 to 58.34, and 0.11-12.8 μg/L, respectively. The mean HQ calculated due to exposure to Pb (0.0018-0.0023), Cr (0.0112-0.0186), and Cd (0.0370-0.0615) were lower than one. The findings of sensitivity analysis revealed that HMs concentration had the most contribution effect on human non-carcinogenic risk analysis in four different exposed populations. This study could assist researchers to perform more comprehensive studies with more samples. Therefore, further research is required for decision-makers to plan proper measurements properly.

Counter Current Salting-out Homogenous Liquid-liquid Extraction and Dispersion Liquid-liquid Microextraction Based on the Solidification of Floating Organic Drop Followed by High-performance Liquid Chromatography for the Isolation and Preconcentration of Pesticides from Fruit Samples

BACKGROUND

Pesticides are widely used to control pests and prevent diseases in crops, including cereals, vegetables, and fruits. Due to factors such as the persistence of pesticides, bioaccumulation, and potential toxicity, the pesticide residues monitoring in foodstuffs is very important.

OBJECTIVE

In the current research, we proposed a novel approach to counter current salting-out homogenous liquid-liquid extraction (CCSHLLE) combined with dispersive liquid-liquid microextraction based on the solidification of floating organic drop (DLLME-SFO) in pesticides from aqueous samples for the isolation and preconcentration, which were evaluated prior to analysis as real samples by high-performance liquid chromatography-ultraviolet detection (HPLC-UV).

METHODS

In brief, sodium chloride was applied as a separation reagent, which is filled in a small glass column, through which a combination of an aqueous solution (here we could say as juice of fruit) and passing of acetonitrile. In this process, the droplets rose through the column and a separated layer would be formed on what has remained from aqueous phase. Following that, acetonitrile as the organic phase combined with 50.0 µL of extraction solvent. To further enrich the analytes, the mixture was injected into five milliliters of a 4% sodium chloride solution and placed in a tube for the DLLME-SFO.

RESULTS

Under optimal conditions, the dynamic linear range of 0.5-500 μg/L, extraction recovery of 65-85%, enrichment factors of 108-142, and limit of detection as 0.2-0.4 μg/L were obtained for the organophosphorus pesticides. In addition, the repeatability and reproducibility in the five replicate of the pesticides measurements (100 μg/L) are within the ranges of 3.5-5.1% and 4.5-6.3%, respectively.

A Short Review on Recent Advances of Hydrogel-Based Adsorbents for Heavy Metal Ions

The growth of industry fulfills our necessity and promotes economic development. However, pollutants from such industries pollute water bodies which pose a high risk for living organisms. Thus, researchers have been urged to develop an efficient method to remove toxic heavy metal ions from water bodies. The adsorption method shows promising results for the removal of heavy metal ions and is easy to operate on a large scale, thus can be applied to practical applications. Numerous adsorbents were developed and reported, among them hydrogels, which attract great attention because of the reusability, ease of preparation, and handling. Hydrogels are generally prepared by the cross-linking of polymers that result in a three-dimensional structure, showing high porosity and high functionality. They are hydrophilic in nature because of the functional groups, and are non-toxic. Thus, this review provides various methods of hydrogel adsorbents preparation and summarizes recent progress in the use of hydrogel adsorbents for the removal of heavy metal ions. Further, the mechanism involved in the removal of heavy metal ions is briefly discussed. The most recent studies about the adsorption method for the treatment of heavy metal ions contaminated water are presented.

Preparation of environmental samples for chemical speciation of metal/metalloids: A review of extraction techniques

Chemical speciation is a relevant topic in environmental chemistry since the (eco)toxicity, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). Maintaining the chemical stability of the species and avoiding equilibrium disruptions during the sample treatment is one of the biggest challenges in chemical speciation, especially in environmental matrices where the level of concomitants/interferents is normally high. To achieve this task, strategies based on chemical properties of the species can be carried out and pre-concentration techniques are often needed due to the low concentration ranges of many species (μg L^-1 - ng L^-1). Due to the significance of the topic and the lack of reviews dealing with sample preparation of metal (loid)s (usually, sample preparation reviews focus on the total metal content), this work is presented. This review gives an up-to-date overview of the most common sample preparation techniques for environmental samples (water, soil, and sediments), with a focus on speciation of metal/metalloids and determination by spectrometric techniques. Description of the methods is given, and the most recent applications (last 10 years) are presented.

One-Step Preparation of Chitosan-Based Magnetic Adsorbent and Its Application to the Adsorption of Inorganic Arsenic in Water

Chitosan is a kind of biodegradable natural polysaccharide, and it is a very promising adsorber material for removing metal ions from aqueous solutions. In this study, chitosan-based magnetic adsorbent CMC@Fe₃O₄ was synthesized by a one-step method using carboxymethyl chitosan (CMC) and ferric salts under relatively mild conditions. The Fe₃O₄ microspheres were formed and the core-shell structure of CMC@Fe₃O₄ was synthesized in the meantime, which was well characterized via SEM/TEM, XRD, VSM, FT-IR, thermo gravimetric analysis (TGA), XPS, size distribution, and zeta potential. The effects of initial arsenic concentration, pH, temperature, contact time, and ionic strength on adsorption quantity of inorganic arsenic was studied through batch adsorption experiments. The magnetic adsorbent CMC@Fe₃O₄ displayed satisfactory adsorption performance for arsenic in water samples, up to 20.1 mg/g. The optimal conditions of the adsorption process were pH 3.0, 30-50 °C, and a reaction time of 15 min. The adsorption process can be well described by pseudo-second-order kinetic model, suggesting that chemisorption was main rate-controlling step. The Langmuir adsorption model provided much higher correlation coefficient than that of Freundlich adsorption model, indicating that the adsorption behavior is monolayer adsorption on the surface of the magnetic adsorbents. The above results have demonstrated that chitosan-based magnetic adsorbent CMC@Fe₃O₄ is suitable for the removal of inorganic arsenic in water.

Fast and High Sensitive Analysis of Lead in Human Blood by Direct Sampling Hydride Generation Coupled with in situ Dielectric Barrier Discharge Trap

A direct sampling hydride generation (HG) system based on modified gas liquid separator (GLS) coupled with in situ dielectric barrier discharge (DBD) is first rendered to detect lead in blood samples. Herein, a triple-layer coaxial quartz tube was employed as DBD trap (DBDT) to replace the original atomizer of atomic fluorescence spectrometry (AFS) to satisfy the in situ preconcentration. After 40-fold dilution, foams generated from protein in a blood sample can be eliminated via the double-GLS set; and lead in a blood sample were generated as plumbane under 3.5% HNO₃ (v:v) and 30 g/L NaOH with 8 g/L KBH₄, 10 g/L H₃BO₃, and 5 g/L K₃[Fe(CN)₆]. Then, lead analyte was trapped on the DBD quartz surface by 9 kV discharging at 50 mL/min air; and subsequently released by 12 kV discharging at 110 mL/min H₂. The absolute detection limit (LOD) for Pb was 8 pg (injection volume = 2 mL), and the linearity (R² > 0.997) range was 0.05 - 50 μg/L. The results were in good agreement with that of blood certified reference materials (CRM), and spiked recoveries for real blood samples were 95 - 104% within a relative standard deviation of 5% (RSD). Via gas phase enrichment, the established method improved analytical sensitivity (peak height) by 8 times. The entire analysis time including blood sample preparation can be kept to within 10 min. The combination of modified GLS and DBDT can facilitate the quickness, accuracy, and sensitivity, revealing a promising future for monitoring lead in blood to protect humans, especially children's health.

Analysis of pyrethroids in cereals by HPLC with a deep eutectic solvent-based dispersive liquid-liquid microextraction with solidification of floating organic droplets

This work presents a novel and green analytical procedure involving a deep eutectic solvent-based dispersive liquid-liquid microextraction with solidification of floating organic droplets (DES-DLLME-SFOD) followed by HPLC to measure three pyrethroids (bifenthrin, β-cypermethrin, and deltamethrin) in cereal samples. Firstly, a low-density hydrophobic DES was synthesized from thymol and octanoic acid in the molar ratio of 1/4 and this was applied as a green extraction solvent in the DLLME procedure to avoid the use of a toxic extractant. After centrifugation and placing it on an ice bath, it is transformed into a solid phase on the top of the sample solution to reduce the loss of extractant, conducive to convenient collection thereafter. This procedure required the optimal conditions (including the type, proportion, and amount of DES as the extractant, the volume of the dispersant acetonitrile, the amount of salt, and the pH value) to be evaluated. Under optimized variates, the proposed method provided good linearity with a correlation coefficient greater than 0.997 and limits of quantification within the range of 6.6-8.9 μg kg^-1. The recoveries of pyrethroids in corn, wheat, barley, and oats were 75.6-87.2%, and the relative standard deviation was less than 3.6%. The method, therefore, offers a green, efficient, and convenient approach for the determination of pesticides in cereals.

Determination of sulfonamide residues in animal foodstuffs by magnetic dispersive solid-phase extraction using magnetic carbon nanocomposites coupled with ion pair-dispersive liquid–liquid micro-extraction combined with HPLC-DAD

In this study, magnetic-dispersive solid-phase extraction coupled with ion pair-dispersive liquid–liquid micro-extraction (MSPE-i-DLLME) was used to the pre-concentration and extraction of five sulfonamides residues (sulfadiazine, sulfathiazole, sulfacetamide, sulfamethazine and sulfamethoxazole) in animal foodstuffs. The sulfonamides are extracted using magnetic carbon nanocomposite and then eluted with acetonitrile. In the DLLME step, the target analytes are collected in 1-octanol containing 10% Aliquat-336 (as extraction solvent). Finally, the compounds are quantified by HPLC with DAD detection. The extraction parameters optimized using the one at the time and central composite design methods. Under the optimized conditions: sample solution volume was 100 mL; initial pH: 12, amounts of MCNs: 30 mg; desorption solvent (ACN) volume, 1 mL; desorption condition, 10 min sonication at two step; extraction solvent (1-octanol + 10% aliquat) volume, 115 µL; pH of DLLME step, 3; salt effect, 24.6%, (w/v) NaCl; centrifuge, 5 min, 4000 rpm. In these extraction conditions, the proposed procedure represented good pre-concentration factors between 130 and 490; detection limits in the range from 0.01 to 5 μg kg−1 (at S/N = 3), and linear response in the 0.1–400 μg kg−1 concentration range. The method is successfully applied to the determination of sulfonamides residues in animal foodstuffs.

In situ preconcentration of lead by dielectric barrier discharge and its application to high sensitivity surface water analysis

A novel dielectric barrier discharge (DBD) reactor was utilized to in situ enrich and atomize lead in gas phase. The structure of DBD reactor was optimized to broaden the acidity window of plumbane generation from 1% to 3.5%, bringing better analytical stability and practicability deriving from hydride generation process. For the first time DBD proved effective in lead preconcentration and broadening the acidity window of plumbane generation. Pb can be trapped quantitatively (~100%) on the quartz surface of DBD tube under O₂-containing atmosphere and released (~100%) under H₂-containing atmosphere. The absolute detection limit (LOD) for Pb was 4.1 pg (injection volume = 1.2 mL), and the linear (R² > 0.999) range was 0.05-100 μg/L. The results were in good agreement with those of certified reference materials (CRMs), and spiked recoveries for surface water samples were 99-104% with 2-8% RSD. By gas phase analyte enrichment, the proposed method reduced absolute LOD by 10 times. It was deduced that plumbane was changed to lead oxide species trapped on the quartz tube surface and then released, and transported in form of atoms to the detection zone.

Eco-friendly alginate encapsulated magnetic graphene oxide beads for solid phase microextraction of endocrine disrupting compounds from water samples

In the proposed method iron crosslinked alginate encapsulated magnetic graphene oxide beads were synthesized and used as an adsorbent for the microextraction of endocrine disrupting compounds from water samples and further analyzed by high performance liquid chromatography with ultraviolet detector. The beads were characterized using spectroscopic techniques, such as Fourier transform infra-red spectroscopy for the determination of different functional groups, Scanning electron microscopy for surface morphology, X-ray diffraction for phase determination and energy dispersive X ray spectroscopy for elemental composition. The results revealed that beads surface have functional groups of alginate and graphene oxide which are involved in π-π, n-πinteractions and hydrogen bonding for the bisphenol A and epichlorohydrin adsorption. The experimental conditions were studied for two endocrine disrupting compounds (Epichlorohydrin ad Bisphenol A) and at optimum conditions the adsorption capacity was 6.73 mgg^-1 for epichlorohydrin and 7.01 mgg^-1 for bisphenol A. The kinetic and equilibrium studies revealed that the adsorption process follow pseudo-second order kinetics and Langmuir equilibrium models. Analytical parameters were calculated for the microextraction of epichlorohydrin and bisphenol A. Limit of detection was 8.25 ngL^-1 and 13.99 ngL^-1 (n = 4) for epichlorohydrin and bisphenol A, respectively. Different solvents used for microextraction and maximum extraction of both endocrine disrupting compounds were obtained with methanol. The proposed method was applied to spiked samples and the recovery values were 97.17 ± 3.13% for epichlorohydrin and 99.46 ± 1.39% for bisphenol A. The magnetic graphene oxide encapsulated inside an alginate shows nontoxic green chemical with high extraction performance for toxic organic compounds in water treatment.

The speciation of inorganic arsenic in soil and vegetables irrigated with treated municipal wastewater

An efficient method using vortex-assisted microextraction based on a deep eutectic solvent followed by graphite furnace atomic absorption spectrometry was developed for the determination of arsenic species in soil and vegetables irrigated with treated wastewater.

Determination of Budesonide and Sulfasalazine in Water and Wastewater Samples Using DLLME-SFO-HPLC-UV Method

Dispersive liquid–liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) was applied to isolate budesonide (BUD) and sulfasalazine (SULF) from aqueous samples. The effects of different parameters on the efficiency on the extraction such as type of extrahent and dispersive solvent, ionic strength, pH of sample, and centrifugation time were investigated. Moreover, the influence of foreign substances on a studied process was tested. The calibration curves were recorded. The linearity ranges for BUD and SULF were 0.022–8.611 µg mL−1 and 0.020–7.968 µg mL−1 with the limit of detection (LOD) 0.011 µg mL−1 and 0.012 µg mL−1, respectively. The enrichment factors (EF) for two analytes were high: for BUD it was 145.7 and for SULF, 119.5. The elaborated procedure was applied for HPLC-UV determination of these analytes in water and wastewater samples.

As(III) and Cr(VI) oxyanion removal from water by advanced oxidation/reduction processes-a review

Water pollution by human activities is a global environmental problem that requires innovative solutions. Arsenic and chromium oxyanions are toxic compounds, introduced in the environment by both natural and anthropogenic activities. In this review, the speciation diagrams of arsenic and chromium oxyanions in aqueous solutions and the analytical methods used for their detection and quantification are presented. Current and potential treatment methods for As and Cr removal, such as adsorption, coagulation/flocculation, electrochemical, ion exchange, membrane separation, phyto- and bioremediation, biosorption, biofiltration, and oxidative/reductive processes, are presented with discussion of their advantages, drawbacks, and the main recent achievements. In the last years, advanced oxidation processes (AOPs) have been acquiring high relevance for the treatment of water contaminated with organic compounds. However, these processes are also able to deal with inorganic contaminants, mainly by changing metal/metalloid oxidation state, turning these compounds less toxic or soluble. An overview of advanced oxidation/reduction processes (AO/RPs) used for As and Cr removal was carried out, focusing mainly on H₂O₂/UVC, iron-based and heterogeneous photocatalytic processes. Some aspects related to AO/RP experimental conditions, comparison criteria, redox mechanisms, catalyst immobilization, and process intensification through implementation of innovative reactors designs are also discussed. Nevertheless, further research is needed to assess the effectiveness of those processes in order to improve some existing limitations. On the other hand, the validation of those treatment methods needs to be deepened, namely with the use of real wastewaters for their future full-scale application. Graphical abstract ᅟ.

Persistent sample circulation microextraction combined with graphite furnace atomic absorption spectroscopy for trace determination of heavy metals in fish species marketed in Kermanshah, Iran, and human health risk assessment

BACKGROUND

Persistent sample circulation microextraction (PSCME) combined with graphite furnace atomic absorption spectrometry (GFAAS) was developed as a high pre-concentration technique for the determination of heavy metals in fish species. In this method, a few microliters of organic solvent (40.0 µL carbon tetrachloride) was transferred to the bottom of a conical sample cup. Then 10.0 mL of aqueous solution was transformed to fine droplets while passing through the organic solvent. At this stage, metal-ligand hydrophobic complex was extracted into the organic solvent. After extraction, 20 µL of extraction solvent was injected into the graphite tube using an auto-sampler.

RESULTS

Under optimal conditions, enrichment factors and enhancement factor were in the range of 180-240 and 155-214, respectively. The calibration curves were linear in the range of 0.03-200 µg kg^-1 and the limits of detection (LODs) were in the range of 0.01-0.05 µg kg^-1 . Repeatability (intra-day) and reproducibility (inter-day) for 0.50 µg L^-1 Hg and 0.10 µg L^-1 Cd and Pb were in the range of 3.1-4.2% (n = 7) and 4.3-6.1% (n = 7), respectively.

CONCLUSION

Potential human health risk assessment was conducted by calculating estimated weekly intake (EWI) of the metals from eating fish and comparison of these values with provisional tolerable weekly intake (PTWI) values. EWI data for the studied metals through fish consumption were lower than the PTWI values. © 2017 Society of Chemical Industry.

Speciation of As(ΙΙΙ)/As(V) and Total Inorganic Arsenic in Biological Fluids Using New Mode of Liquid-Phase Microextraction and Electrothermal Atomic Absorption Spectrometry

In this paper, a new extraction method based on countercurrent liquid-liquid microextraction (CLLME) has been developed for the extraction and preconcentration of inorganic arsenic (iAs) in plasma and urine samples prior to their analysis by electrothermal atomic absorption spectrometry (ETAAS). In this method, firstly, 5 ml of water is added to the extraction vessel. Then 30.0 μl of the extracting solvent is added to it in order for the extracting solvent to be placed in the narrow-necked vessel. In total, 10 ml of a standard solution or a pretreated real sample is added to the sample container and it is connected to the extraction vessel via a connector. While opening the embedded valve at the bottom of the sample container and the one in the extraction vessel, the sample solution flows into the extracting solvent with the same flow rate, leading to the successful extraction of metal ligand into the extracting organic solvent. Under the optimum conditions, calibration curves are linear in the range of 0.1-50 μg l^-1, and limit of detections (LODs) are in the range of 0.03-0.05 μg l^-1. The enhancement factor and enrichment factor were in the range of 220-240 and 198-212, respectively. Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 5.0 μg l^-1 of arsenic were in the range of 2.3-3.5% and 4.0-5.7%, respectively. The applicability of the proposed CLLME and ETAAS methods was demonstrated by analyzing the iAs in spiked urine and plasma samples. The obtained recoveries of the arsenic in the range of 92-107% indicated the excellent capability of the developed method for speciation of arsenic from plasma and urine samples. Graphical Abstract ᅟ.

Fully-automated magnetic stirring-assisted lab-in-syringe dispersive liquid–liquid microextraction for the determination of arsenic species in rice samples

Fully-automated magnetic stirring-assisted lab-in-syringe dispersive liquid–liquid microextraction (MAS-LIS-DLLME), combined with graphite furnace atomic absorption spectrometry (GFAAS) was developed for the fast and efficient separation and preconcentration of trace levels of inorganic arsenic species in rice samples. This totally automated analytical procedure combines the advantages of lab-in-syringe flow system and dispersive liquid–liquid microextraction (DLLME) aiming at separation of trace arsenite and arsenate species from natural matrix for the first time. With a single syringe pump that is coupled with a multiposition valve, the whole lab-in-syringe microextraction process including cleaning, mixing, microextraction, phase separation, and target analyte collection was implemented in a fully-automated way. Significant factors of the MAS-LIS-DLLME method were sample acidity, concentration of the chelating agent, amounts of ionic liquids (ILs), aspiration speed and matrix interference. Using the present method, the limits of detection (LODs) for As(v) was 0.005 μg L⁻¹. The relative standard deviation (RSDs) for seven replicate measurements of 2.0 μg L⁻¹ of As(v) was 3.7%. The linear dynamic range (LDR) was 0.04–5.0 μg L⁻¹ and the determination coefficients was 0.9990. Under the optimum conditions, the developed totally automated analytical procedure was successfully applied for the trace arsenite and arsenate species studies in natural rice samples and standard reference materials with satisfactory results.

The schematic of the MAS-LIS-DLLME system. D, detection system; SP, syringe pump; SV, three-way solenoid valve; W, waste; MPV, multiposition valve.

Optimization of a methodology for the simultaneous determination of deltamethrin, permethrin and malathion in stored wheat samples using dispersive liquid-liquid microextraction with solidification of floating organic drop and HPLC-UV

The purpose of this study was to investigate common pesticides in stored wheat at Kermanshah province's silos in Iran. A simple, inexpensive, reliable and environmentally friendly method based on dispersive liquid-liquid microextraction with solidification of floating organic drop was developed. The analytical characteristics of the method were determined. Also, various parameters such as the materials of the silos, types of ownerships of the silos, geographic orientation of silo locations and climatic conditions of silo locations on pesticide residues in studied wheat samples were investigated. Among all the studied parameters, the climatic conditions of silo locations showed the highest influence on pesticide residues in wheat samples. Generally, 61.2% of the samples had pesticide levels below the method detection limits and 38.8% of the total samples had at least one of the understudied pesticides. Also, 13.9% of the samples had deltamethrin residues, 16.7% of the samples had permethrin, 22.2% of the samples had malathion, 11.1% of the samples had both permethrin and malathion and 2.8% of the samples had both deltamethrin and malathion. The results revealed that the residues of deltamethrin and malathion were lower than the standard level announced by European Union regulation and only three samples contained permethrin higher than Europe standard level.

Determination of cadmium in cosmetics from Kermanshah, Iran by graphite furnace atomic absorption spectrometry

Continuous sample drop flow-based microextraction (CSDF-ME) combined with graphite furnace atomic absorption spectrometry (GFAAS) has been developed as a high-performance preconcentration technique for the determination of cadmium in cosmetic samples.

A novel environment-friendly hybrid material based on a modified silica gel with a bispyrazole derivative for the removal of ZnII, PbII, CdIIand CuIItraces from aqueous solutions

New surface-functionalized with bispyrazole receptor was designed for efficient removal of heavy metals. The architecture of host–guest on the surface was identified.

Simultaneous determination of ultra-low traces of lead and cadmium in food and environmental samples using dispersive solid-phase extraction (DSPE) combined with ultrasound-assisted emulsification microextraction based on the solidification of floating organic drop (UAEME-SFO) followed by GFAAS

Dispersive solid-phase extraction (DSPE) combined with ultrasound-assisted emulsification microextraction (UAEME) for determination of lead and cadmium in food and environmental samples prior to GFAAS.

Determination of total arsenic and arsenic species in drinking water, surface water, wastewater, and snow from Wielkopolska, Kujawy-Pomerania, and Lower Silesia provinces, Poland

Arsenic is a ubiquitous element which may be found in surface water, groundwater, and drinking water. In higher concentrations, this element is considered genotoxic and carcinogenic; thus, its level must be strictly controlled. We investigated the concentration of total arsenic and arsenic species: As(III), As(V), MMA, DMA, and AsB in drinking water, surface water, wastewater, and snow collected from the provinces of Wielkopolska, Kujawy-Pomerania, and Lower Silesia (Poland). The total arsenic was analyzed by inductively coupled plasma mass spectrometry (ICP-MS), and arsenic species were analyzed with use of high-performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Obtained results revealed that maximum total arsenic concentration determined in drinking water samples was equal to 1.01 μg L(-1). The highest concentration of total arsenic in surface water, equal to 3778 μg L(-1) was determined in Trująca Stream situated in the area affected by geogenic arsenic contamination. Total arsenic concentration in wastewater samples was comparable to those determined in drinking water samples. However, significantly higher arsenic concentration, equal to 83.1 ± 5.9 μg L(-1), was found in a snow sample collected in Legnica. As(V) was present in all of the investigated samples, and in most of them, it was the sole species observed. However, in snow sample collected in Legnica, more than 97 % of the determined concentration, amounting to 81 ± 11 μg L(-1), was in the form of As(III), the most toxic arsenic species.

Inorganic arsenic speciation in water samples by miniaturized solid phase microextraction using a new polystyrene polydimethyl siloxane polymer in micropipette tip of syringe system

The polymer, polystyrene polydimethyl siloxane was loaded into the micropipette tip of the syringe system as an adsorbent to developed miniaturized solid phase microextraction. Standard solutions of arsenate and arsenite were passed through the adsorbent loaded in micropipette tip to check the adsorption behaviors. It was observed that arsenate adsorbed on the polystyrene polydimethyl siloxane in the pH rang of 6-8, while arsenite was directly passed through the micropipette tip of syringe system. The adsorbed arsenate in micropipette tip of syringe system were eluted by 1.0M hydrochloric acid. The total inorganic arsenic contents were obtained by the addition of oxidizing agent potassium permanganate into the studied samples before passing to the micropipette tip of syringe system. Arsenite concentration in water samples were measured by subtracting arsenate from total inorganic arsenic concentration. Different characteristics which effect the determination of arsenate specie like amount of adsorbent, adsorption capacity, pH, pulled and pushed cycles for adsorption and desorption, volume of sample, eluent type and it volume were also studied in detail. Enrichment factor and detection limit of arsenate by desired method were 218 and 6.9ngL^-1 respectively. The relative standard deviation was 4.1% (n=10, C=0.12µgL^-1). Accuracy of the desired technique was confirmed by analysis of the CRMs (Lake Ontario Water TM-28.3 and Riverine Water NRCC-SLRS-4). Desired technique was significantly useful for determination of the total arsenic, arsenate, and arsenite contents in different natural water samples.