Monitoring the inorganic chemical reaction by surface-enhanced Raman spectroscopy: A case of Fe3+ to Fe2+ conversion

Ag/ZnO microcavities with high sensitivity and self-cleaning properties for fast repetitive SERS detection

A SERS substrate with high sensitivity and reusability was proposed. The chip consists of multiple ZnO microcavities loaded with silver particles. Based on structural characteristics, this coupling between cavity modes and localized surface plasmon modes can highly localize the electric field, where experimental results revealed a detection limit of 10-11 M for R6G. In addition, during carrier control in semiconductors with localized electromagnetic fields, our substrate also exhibits high self-cleaning efficiency and in situ detection stability. Even in a dry environment, it exhibits excellent light-mediated cleaning ability across multiple reuse test cycles. The convenient, rinse-free substrate, with its cost-effective and sustainable features, shows great promise for the study on detection and degradation of active materials.

Terbium alginate encapsulated CsPbI3@Pb-MOF: a ratiometric fluorescent bead for detection and adsorption of Fe3

Halide perovskite nanocrystals are innovative luminescent materials for fluorescent probes with high quantum yield and narrow emission bandwidth. However, the limited stability, single-signal response, and separation challenges obstruct their widespread use in water ion detection. Herein, a ratiometric fluorescence sensor based on terbium alginate gel beads (green fluorescent, namely Tb-AG) embedded with powdered CsPbI3@Pb-MOF (red fluorescent) was prepared for fluorescent determination and adsorption of Fe3+. Pb-MOF's protection notably enhances the water stability of CsPbI3, while the energy transfer between CsPbI3@Pb-MOF and Tb3+ elevates the optical performance of CsPbI3@Pb-MOF@Tb-AG. Significantly, Fe3+ markedly suppresses CsPbI3@Pb-MOF red fluorescence at 647 nm, while not noticeably affecting Tb-AG green emission at 528 nm. The sensor exhibited a strong linear response to Fe3+ concentrations ranging from 0 to 90 μM, with a detection limit of 0.44 μM and high selectivity. The CsPbI3@Pb-MOF@Tb-AG-based sensor has been effectively validated through its successful use in detecting Fe3+ in tap and river water samples. Furthermore, CsPbI3@Pb-MOF@Tb-AG demonstrates a notable adsorption capacity of 325.4 mg g-1 Fe3+. Finally, the mechanism of Fe3+ detection and adsorption was determined.

MoS2/Au Heterojunction Catalyst for SERS Monitoring of a Fenton-like Reaction

Fenton technology is one of advanced oxidation process (AOP) methods to treat wastewater through chemical oxidation. Due to the limitations of classical iron-based catalysts, it is still challenging to find suitable catalysts for Fenton-like reactions. Here, MoS₂/Au heterojunctions were successfully synthesized by reduction of chloroauric acid in the solution of layered MoS₂ prepared by hydrothermal method. As a model molecule, methylene blue (MB) was used as the species to be degraded to evaluate the performance of the catalyst. It was determined by UV-visible spectra that the optimal catalyst can be obtained when MoS₂ (mg): HAuCl₄ (wt. % mL) is 2:2. The Fenton-like reaction process was monitored by introducing highly sensitive surface enhanced Raman spectroscopy (SERS). The results show that MB can be degraded by 83% in the first 10 min of the reaction, indicating that MoS₂/Au has good catalytic performance. In addition, as a fingerprint spectrum, SERS was used to preliminarily analyze the molecular structure changes during the degradation process. The result showed that C-N-C bond was easier to break than the C-S-C bond. NH₂ group and the fused ring were destroyed at the comparable speed at the first 30 min. In terms of application applicability, it was showed that MB degradation had exceeded 95% at all the three pH values of 1.4, 5.0, and 11.1 after the reaction was carried out for 20 min. The test and analysis of the light environment showed that the catalytic efficiency was significantly improved in the natural light of the laboratory compared to dark conditions. The possible mechanism based on ·OH and ·O₂^- from ESR data was proposed. In addition, it was demonstrated to be a first-order reaction from the perspective of kinetics. This study made a positive contribution to broaden of the applicable conditions and scope of Fenton-like reaction catalysts. It is expected to be used as a non-iron catalyst in practical industrial applications. From the perspective of detection method, we expect to develop SERS as a powerful tool for the in situ monitoring of Fenton-like reactions, and to further deepen our understanding of the mechanism.

Simultaneous extraction and surface enhanced Raman spectroscopy detection for the rapid and reliable identification of nicotine released from snus products

Surface enhanced Raman spectroscopy (SERS) is a highly sensitive analytical detection technique that provides unique chemical and structural information on target molecules. Here, simultaneous extraction and SERS detection of nicotine for the rapid and reliable identification of nicotine released from snus products were performed based on a nano-Au assembly hierarchy structure in the capillary. Based on this strategy, the time evolution of the concentrations of nicotine released from the snus products was measured. Through comparison of the intensities of the spectral peaks of the symmetrical breathing of the pyridine moiety of nicotine molecules, with the prolongation of time, the concentration of nicotine released decreased significantly, which is helpful for establishing a method for the rapid evaluation of the processing and selection of excipients of snus products, and provides a new idea for further study of the production of snus pouches and related tobacco products. Moreover, based on data fitting, it can be calculated that the concentration of nicotine in the extraction presented an obvious quadratic relationship with time, and the release of most of the nicotine in the snus pouch, which is held through the gums and palate, was basically completed after ∼15 min. Such destruction-free simultaneous measurements of snus products are opening up new perspectives for further research about the impact of nicotinoids on smokers' health and cessation programs.

Online discovery of the molecular mechanism for directionally detoxification of Fuzi using real-time extractive electrospray ionization mass spectrometry

ETHNOPHARMACOLOGICAL RELEVANCE

Aconitum carmichaelii Debeaux, a famous traditional medicinal herb for collapse, rheumatic fever, and painful joints, always raises global concerns about its fatal toxicity from toxic alkaloids when improperly processed. Therefore, it is urgent to clarify the internal molecular mechanism of processing detoxification on Aconitum and develop simple and reliable approaches for clinical application, which is also of great significance to the rational medicinal use of Aconitum.

AIM OF THE STUDY

The study aimed at developing a complete molecular mechanism exploration strategy in complex medicinal herb decocting system, clarifying the internal molecular mechanism of processing detoxification on Aconitum, and exploring valid approaches for detoxification.

MATERIALS AND METHODS

Aconiti Lateralis Radix Praeparata (Fuzi) was selected as the model for exploring the complex Aconitum detoxification mechanism using an advanced online real-time platform based on extractive electrospray ionization mass spectrometry. The methods realized the sensitive capture of dynamic trace intermediates, accurate qualitative and quantitative analysis, and real-time and long-term monitoring of multi-components with satisfactory accuracy and resistance to complex matrices.

RESULTS

Components in the complex Aconitum decocting system were real-timely characterized and fat meat was discovered and verified to directionally detoxify Aconitum while reserving the therapy effect. More importantly, the dynamic detoxification mechanism in the chemically complex Aconitum decoction was molecularly profiled. A novel reaction pathway based on nucleophilic substitution reaction mechanism was proposed. As confirmed by the theoretic calculations at DFT B3LYP/6-31G (d) levels, fatty acids (e.g., palmitic acid) acted as a green, cheap, and high-performance catalyst and promote the decomposition of toxic diester alkaloids to non-toxic and active benzoyl-monoester alkaloids through the discovered mechanism.

CONCLUSION

The study exposed a novel detoxification molecular mechanism of Aconitum and provided an effective method for the safe use of Aconitum, which could effectively guide the development of traditional processing technology and compatibility regulation of the toxic herb and had great value to the modernization and standardization development of traditional medicine.

Silver nanoparticles decorated g-C3N4: An efficient SERS substrate for monitoring catalytic reduction and selective Hg2+ions detection

Graphitic carbon nitride supported Ag NPs(AgNPs@g-C₃N₄) were synthesized by an in-situ chemical reduction using a green reducing agent, tannic acid. They were characterized by UV-Vis, FTIR, XPS, XRD, FESEM, EDAX and HRTEM. They were very much SERS sensitive, and capable of detecting methylene blue and 4-aminothiophenol at 1 × 10^-12 M and 1 × 10^-10 M, respectively with the corresponding SERS enhancement factor of 1.4 × 10⁸ and 4.7 × 10⁷. Apart from its high SERS sensitivity, it exhibited high catalytic activity for the reduction of MB with NaBH₄. So, their SERS activity and catalytic activity were combined successfully to monitor catalytic reduction of MB by SERS technique. Further, the SERS activity towards MB was also employed for the detection/quantification of free Hg²⁺ ions in aqueous solution. The SERS intensity of MB drastically decreased in the presence of Hg²⁺ ions, and hence it provides novel route to detect and quantify the latter. Presence of Ca²⁺, Mg²⁺, Cu²⁺ and Cd²⁺ions showed zero interference for it. So, this study proves that Ag NPs@g-C₃N₄ as a unique substrate for multiple SERS applications.

Functional paper-based SERS substrate for rapid and sensitive detection of Sudan dyes in herbal medicine

There has been an increasing demand for rapid and sensitive techniques for the identification of Sudan compounds that emerged as the most often illegally added fat-soluble dyes in herbal medicine. In this report, we have designed and fabricated a functionalized filter paper consisting of gold nanorods (GNRs) and mono-6-thio-cyclodextrin (HS-β-CD) as a surface-enhanced Raman spectroscopy (SERS) substrate, in which the GNR provides sufficient SERS enhancement, and the HS-β-CD with strong chemical affinity toward GNR provides the inclusion compound to capture hydrophobic molecules. Moreover, the CD-GNR were uniformly assembled on filter paper cellulose through the electrostatic adsorption and hydrogen bond, so that the CD-GNR paper-based SERS substrate (CD-GNR-paper) demonstrated higher sensitivity for the determination of Sudan III (0.1μM) and Sudan IV (0.5μM) than GNRs paper-based SERS substrate (GNR-paper), with high stability after the storage in the open air for 90days. Importantly, CD-GNR-paper can effectively collect the Sudan dyes from illegally adulterated onto samples of Resina Draconis with a simple operation, further open up new exciting opportunity for SERS detection of more compounds illegally added with high sensitivity and fast signal responses.