Facile synthesis of CoxP decorated porous carbon microspheres for ultrasensitive detection of 4-nitrophenol

Electrochemical Sensing Systems for the Analysis of Catechol and Hydroquinone in the Aquatic Environments: A Critical Review

Because of their unique physical, chemical, and biological characteristics, conductive nanomaterials have a lot of potential for applications in materials science, energy storage, environmental science, biomedicine, sensors/biosensors, and other fields. Recent breakthroughs in the manufacture of carbon materials, conductive polymers, metals, and metal oxide nanoparticles based electrochemical sensors and biosensors for applications in environmental monitoring by detection of catechol (CC) and hydroquinone (HQ) are presented in this review. To achieve this goal, we first introduced recent works that discuss the effects of phenolic compounds and the need for accurate, inexpensive, and quick monitoring, and then we focused on the use of the most important applications of nanomaterials, such as carbon-based materials, metals, and metal oxides nanoparticles, and conductive polymers, to develop sensors to monitor catechol and hydroquinone. Finally, we identified challenges and limits in the field of sensors and biosensors, as well as possibilities and recommendations for developing the field for better future applications. Meanwhile, electrochemical sensors and biosensors for catechol and hydroquinone measurement and monitoring were highlighted and discussed particularly. This review, we feel, will aid in the promotion of nanomaterials for the development of innovative electrical sensors and nanodevices for environmental monitoring.

In situ construction of covalent-organic framework on hydrogen-bond organic framework: Fluorescence detection and removal of 4-nitrophenol and metamitron in aqueous media

A multifunctional COF@HOF (ETTA-DFP@TCBP-HOF) composite is prepared by adding red-fluorescent ETTA-DFP COF to the blue-fluorescent TCBP-HOF preparation system through molecular hydrogen bonding or π - π stacking interactions in situ one-pot synthesis. ETTA-DFP@TCBP-HOF is a multifunctional material for the quantitative detection and simultaneous adsorption of 4-nitrophenol (4-NP) and metamitron (MET) in aqueous solution. As a dual-emission fluorescent sensor, the ETTA-DFP@TCBP-HOF has both fluorescence of TCBP-HOF at 474 nm and ETTA-DFP COF at 592 nm, which shows a ratiometric response to 4-NP and MET with high selectivity, good sensitivity, good anti-interference performance and fast response. As a adsorbent, ETTA-DFP@TCBP-HOF displays rapid adsorption kinetics, and acceptable adsorption capacity for 4-NP and MET. In conclusion, this work constructs a novel multifunctional hybrid material with dual-emission center of HOF and COF, which can not only be used as a ratiometric fluorescent probe for detection, but also for removal of hazardous pollutants, suggesting a new strategy for environmental remediation and human health.

Cobalt-nickel phosphide supported on reduced graphene oxide for sensitive electrochemical detection of bisphenol A

Bisphenol A (BPA) is a commonly utilized phenolic contaminant in several manufacturing processes, contributing to environmental pollution. Therefore, the detection of BPA holds significant importance for monitoring water quality. In this work, we report a robust electrochemical detection method for BPA utilizing cobalt-nickel bimetal phosphide nanoparticles (CoNiP) supported on reduced graphene oxide (rGO). The CoNiP@rGO-modified glassy carbon electrode exhibits remarkable electrochemical activity in BPA detection. The detection mechanism is controlled by adsorption-mediated electron transfer, showcasing a low limit of detection (LOD) at 0.38 nM and a high sensitivity of 96.4 A M-1 cm-2 within the linear range of 0.001-8 μM. Furthermore, our developed sensor demonstrates good reproducibility and successfully detected BPA in actual water samples. The electrochemical activity of CoNiP@rGO was also characterized for hydroquinone (HQ) detected through a diffusion-controlled mechanism, displaying an excellent sensitivity of 36.4 A M-1 cm-2 across a broad linear range. These findings underscore the promising potential of CoNiP@rGO as a candidate for electrochemical detection of phenolic contaminants, especially in the sensing of BPA in environmental water samples. This efficacy is attributed to the modulation of its electronic properties, combined with its large electroactive surface area and low electron-transfer resistance.

Electrochemical Sensors Based on Transition Metal Materials for Phenolic Compound Detection

Electrochemical sensors have been recognized as crucial tools for monitoring comprehensive chemical information, especially in the detection of a significant class of molecules known as phenolic compounds. These compounds can be present in water as hazardous analytes and trace contaminants, as well as in living organisms where they regulate their metabolism. The sensitive detection of phenolic compounds requires highly efficient and cost-effective electrocatalysts to enable the development of high-performance sensors. Therefore, this review focuses on the development of advanced materials with excellent catalytic activity as alternative electrocatalysts to conventional ones, with a specific emphasis on transition metal-based electrocatalysts for the detection of phenolic compounds. This research is particularly relevant in diverse sectors such as water quality, food safety, and healthcare.

Phosphorus-based nanomaterials as a potential phosphate fertilizer for sustainable agricultural development

Phosphorus-based nanomaterials (PNMs) have been reported to have substantial promise for promoting plant growth, improving plant tolerance mechanisms, and increasing resistance to pathogenic organisms. Recent scientific investigation has demonstrated that utilizing PNMs can enhance plant physiological growth, photosynthetic pigments, antioxidant system, metabolism, nutrient absorption, rhizosphere secretion, and soil nutrients activation. Previous research on PNMs mostly concentrated on calcium phosphate, zeolite, and chitosan, with little systematic summarization, demanding a thorough evaluation of PNMs' broader uses. In our current review article, we address the knowledge gap by classifying PNMs according to green synthesis methods and the valence state of phosphorus while elucidating the underlying mechanisms through which these PNMs facilitate plant growth. In addition, we also targeted some strategies to improve the bioavailability of PNMs, offering valuable insights for the future design and safe implementation of PNMs in agricultural practices.

An ultrasensitive dietary caffeic acid electrochemical sensor based on Pd-Ru bimetal catalyst doped nano sponge-like carbon

Caffeic acid (CA) is widely present in the human daily diet, and a reliable CA detection method is beneficial to food safety. Herein, we constructed a CA electrochemical sensor employing a glassy carbon electrode (GCE) which was modified by the bimetallic Pd-Ru nanoparticles decorated N-doped spongy porous carbon obtained by pyrolysis of the energetic metal-organic framework (MET). The high-energy bond N-NN in MET explodes to form N-doped sponge-like carbon materials (N-SCs) with porous structures, boosting the adsorptive capacity for CA. The addition of Pd-Ru bimetal improves the electrochemical sensitivity. The linear range of the PdRu/N-SCs/GCE sensor is 1 nM-100 nM and 100 nM-15 μM, with a low detection limit (LOD) of 0.19 nM. It has a high sensitivity (55 μA/μM) and repeatability. The PdRu/N-SCs/GCE sensor has been used to detect CA in actual samples of red wine, strawberries, and blueberries, providing a novel approach for CA detection in food analysis.

Crystal Phase-Controlled Synthesis of the CoP@Co2P Heterostructure with 3D Nanowire Networks for High-Performance Li-Ion Capacitor Applications

The paramount focus in the construction of lithium-ion capacitors (LICs) is the development of anode materials with high reversible capacity and fast kinetics to overcome the mismatch of kinetics and capacity between the anode and cathode. Herein, a strategy is presented for the controllable synthesis of cobalt-based phosphides with various morphologies by adjusting the time of the phosphidation process, including 3D hierarchical needle-stacked diabolo-shaped CoP nanorods, 3D hierarchical stick-stacked diabolo-shaped Co₂P nanorods, and 3D hierarchical heterostructure CoP@Co₂P nanorods. 3D hierarchical nanostructures and a highly conductive project to accommodate volume changes are rational designs to achieve a robust construction, effective electron-ion transportation, and rapid kinetics characteristics, thus leading to excellent cycling stability and rate performance. Owing to these merits, the 3D hierarchical CoP, Co₂P, and CoP@Co₂P nanorods demonstrate prominent specific capacities of 573, 609, and 621 mA h g^-1 at 0.1 A g^-1 over 300 cycles, respectively. In addition, a high-performance CoP@Co₂P//AC LIC is successfully constructed, which can achieve high energy densities of 166.2 and 36 W h kg^-1 at power densities of 175 and 17524 W kg^-1 (83.7% capacity retention after 12000 cycles). Therefore, the controllable synthesis of various simultaneously constructed crystalline phases and morphologies can be used to fabricate other advanced energy storage devices.

Regulation of Ce (Ⅲ) / Ce (Ⅳ) ratio of cerium oxide for antibacterial application

Antibiotics have been considered as effective weapons against bacterial infections since they were discovered. However, antibiotic resistance caused by overuse and abuse of antibiotics is an emerging public health threat nowadays. Fully defeating bacterial infections has become a tough challenge. In this work, cerium oxide was fabricated on medical titanium by thermolysis of cerium-containing metal-organic framework (Ce-BTC). Regulation of Ce (Ⅲ)/Ce (Ⅳ) ratios was realized by pyrolysis of Ce-BTC in different gas environment, and the antibacterial properties were studied. The results indicated that, in acidic conditions, ceria with a high Ce (Ⅲ)/Ce (Ⅳ) ratio owned high oxidase-like activity which could produce reactive oxygen species. Moreover, ceria with high Ce (Ⅲ) content possessed strong ATP deprivation capacity which could cut off the energy supply of bacteria. Based on this, ceria with a high Ce (Ⅲ)/Ce (Ⅳ) ratio exhibited superior antibacterial activity

•

Cerium oxide films were fabricated on the titanium surface by pyrolysis of Ce-BTC

•

The valence states of cerium element on cerium oxide can be modulated flexibly

•

CeO_2-X with high Ce (Ⅲ)/Ce (Ⅳ) ratio possessed high antibacterial rate

•

Antibacterial rate is related to the oxidase-like and ATP deprivation capacity

Size-controllable synthesis of zinc ferrite/reduced graphene oxide aerogels: efficient electrochemical sensing of p-nitrophenol

In this study, a nonaqueous method for the synthesis of size-controlled highly crystalline zinc ferrite/reduced graphene oxide (ZFO/rGO) aerogel was provided by using benzyl alcohol as the medium. In our findings, benzyl alcohol was introduced not only as the solvent, but the structure-directing agent and strong reducing agent during the nucleation and growth of ZnFe₂O₄ nanoparticles (NPs). The characterization analysis indicated that ZnFe₂O₄ NPs were immobilized on the multilayer rGO with a controllable size of 12 nm. Moreover, the 3D ZFO/rGO aerogel shows excellent electrochemical property as a facile electrochemical sensor for the detection of p-nitrophenol (p-NP). The ZFO/rGO electrochemical sensing offers the advantages of wide linear range (1-500 μmol l^-1), excellent sensitivity (23.985 mA mM^-1 cm^-2), good stability and selectivity (<8.8%). In addition, the possible reaction mechanism of 3D ZFO/rGO aerogel was explained during the detection process under acidic condition. Significantly, our results not only provided insight into the possible reaction mechanism of 3D ZFO/rGO nanocomposite, but proposed the way for the synthesis of highly crystalline materials through a benzyl alcohol-mediated method.

An electrochemical aptasensor-based CoxP-decorated porous carbon microspheres and AuNRs labelled methylene blue as signal labels for the sensitive detection of PCB77

In this work, a simple, specific and ultra-sensitive electrochemical aptasensor was successfully developed based on a novel signal reduction strategy for the detection of polychlorinated biphenyls (PCB77). This aptasensor was prepared by the electrodeposition of gold nanoparticles (AuNPs) on an Au electrode (AuE) modified with cobalt phosphide (Co_xP, a mixture of CoP and Co₂P) decorated porous carbon microspheres. In this study, the thiolated single-complementary DNA (cDNA) was immobilized on the surface of the modified electrode via the Au-S bond. Subsequently, the gold nanorod@methylene blue connection aptamer (AuNRs@MB-Apt) signal labels were immobilized onto the modified electrode through the principle of complementary base pairing. Further, the aptamer preferentially binds to PCB77, decreasing the amount of AuNR@MB-Apt. The DPV current response was related to the PCB77 concentration. Under the optimized experimental conditions, a low detection limit of 5.9 × 10^-2 ng L^-1 and a wide linear range of 1 × 10^-11 mg mL^-1 to 1 × 10^-4 mg mL^-1 (S/N = 3) for PCB77 were achieved. Moreover, the proposed aptasensor offered high selectivity, stability and reproducibility, indicating the broad potential application in environmental monitoring.

Carbonaceous Nanomaterials Employed in the Development of Electrochemical Sensors Based on Screen-Printing Technique—A Review

This paper aims to revise research on carbonaceous nanomaterials used in developing sensors. In general, nanomaterials are known to be useful in developing high-performance sensors due to their unique physical and chemical properties. Thus, descriptions were made for various structural features, properties, and manner of functionalization of carbon-based nanomaterials used in electrochemical sensors. Of the commonly used technologies in manufacturing electrochemical sensors, the screen-printing technique was described, highlighting the advantages of this type of device. In addition, an analysis was performed in point of the various applications of carbon-based nanomaterial sensors to detect analytes of interest in different sample types.

Preparation of reduced graphite oxide loaded with cobalt(II) and nitrogen co-doped carbon polyhedrons from a metal-organic framework (type ZIF-67), and its application to electrochemical determination of metronidazole

The integration of derivatives of granular metal-organic frameworks (MOFs) and an electrically conductive carbon substrate is an effective way to circumvent the deficiency of powdered pristine MOFs or MOF-derived carbon in practical application. The authors describe the use of graphite oxide (GO) as a substrate for in-situ assembly with the zeolitic imidazole framework ZIF-67. The GO and ZIF-67 composites were converted, via pyrolysis, into reduced graphite oxide loaded with Co/N-co-doped carbon polyhedrons (ZIF-67C@rGO). By using various amounts of GO, a series of ZIF-67C@rGO-x with different fractions of GO were synthesized and utilized as electrode modifiers for the detection of the antibiotic metronidazole (MNZ). The results revealed that the ZIF-67C@rGO-0.06 display best sensing performance. This is likely to be due to its hierarchically open pores, abundant active sites and good electrical conductivity. The sensor, best operated near a working potential around -0.6 V (vs. SCE), has a linear response in the 0.5 to 1000 μM MNZ concentration range and a 0.05 μM detection limit. The sensor was applied to the analysis of pharmaceutical samples where it showed excellent selectivity, good repeatability and satisfying recoveries. Graphical abstract Schematic representation of preparation and application of ZIF-67C@rGO-x.

Bifunctional hexagonal Ni/NiO nanostructures: influence of the core-shell phase on magnetism, electrochemical sensing of serotonin, and catalytic reduction of 4-nitrophenol

Ni⁰/NiO (nickel/nickel oxide) core-shell nanostructures were synthesized through a facile combustible redox reaction. Remarkably, the hetero-phase boundary with different crystalline orientations offered dual properties, which helped in bifunctional catalysis. Presence of a metallic Ni phase changed physicochemical properties and some emerging applications (magnetic properties, optical conductivity, electrochemical sensitivity, catalytic behaviour) could be foreseen. Moreover, formation of a NiO layer on metal surface prevented magnetism-induced aggregation, arrested further oxidation by hindering oxygen diffusion, and acted as a good sorbent to enhance the surface adsorption of the analyte. Hexagonal Ni/NiO nanostructures manifested well-defined ferromagnetic behavior and the catalyst could be collected easily at the end of the catalytic reduction. Ni/NiO core-shell catalysts at the nanoscale had outstanding catalytic performance (reduction of 4-nitrophenol to 4-aminophenol) compared with pure NiO catalysts beyond a reaction time of ∼9 min. The estimated sensitivity, limit of detection and limit of quantification towards the electrochemical sensing of serotonin were 0.185, 0.43 and 1.47 μM μA^-1, respectively. These results suggest that a bifunctional Ni/NiO nanostructure could be a suitable catalyst for electrochemical detection of serotonin and reduction of 4-nitrophenol.