A novel BODIPY-based fluorescent probe for selective detection of hydrogen sulfide in living cells and tissues

Analysis of optical properties and response mechanism of H2S fluorescent probe based on rhodamine derivatives

H2S plays a crucial role in numerous physiological and pathological processes. In this project, a new fluorescent probe, SG-H2S, for the detection of H2S, was developed by introducing the recognition group 2,4-dinitrophenyl ether. The combination of rhodamine derivatives can produce both colorimetric reactions and fluorescence reactions. Compared with the current H2S probes, the main advantages of SG-H2S are its wide pH range (5-9), fast response (30 min), and high selectivity in competitive species (including biological mercaptan). The probe SG-H2S has low cytotoxicity and has been successfully applied to imaging in MCF-7 cells, HeLa cells, and BALB/c nude mice. We hope that SG-H2S will provide a vital method for the field of biology.

Bodipy-Based highly sensitive hydrogen sulfide fluorescent probe and its fluorescence imaging in cells and zebrafish

Hydrogen sulfide (H2S) is a crucial endogenous gasotransmitter that plays a role in various physiological and pathological processes. Therefore, accurate and rapid monitoring of H2S in organisms is highly significant for understanding the underlying pathological mechanisms and facilitating early diagnosis of related diseases. In this study, we developed a novel fluorescent probe, B-CHO-NO2, based on a bodipy fluorophore, which exhibits excellent sensitivity and selectivity towards H2S. The design of the probe exploits the nucleophilicity of H2S by introducing a formyl group as the ortho-participating moiety, significantly enhancing the reaction rate with H2S. In cellular and zebrafish models, the probe B-CHO-NO2 successfully achieved fluorescence imaging of endogenous and exogenous H2S. The development of probe B-CHO-NO2 provides a powerful tool for biological studies of H2S and diagnosis of related diseases.

Activity-Based Fluorescent Probes for Hydrogen Sulfide and Related Reactive Sulfur Species

Hydrogen sulfide (H2S) is not only a well-established toxic gas but also an important small molecule bioregulator in all kingdoms of life. In contemporary biology, H2S is often classified as a "gasotransmitter," meaning that it is an endogenously produced membrane permeable gas that carries out essential cellular processes. Fluorescent probes for H2S and related reactive sulfur species (RSS) detection provide an important cornerstone for investigating the multifaceted roles of these important small molecules in complex biological systems. A now common approach to develop such tools is to develop "activity-based probes" that couple a specific H2S-mediated chemical reaction to a fluorescent output. This Review covers the different types of such probes and also highlights the chemical mechanisms by which each probe type is activated by specific RSS. Common examples include reduction of oxidized nitrogen motifs, disulfide exchange, electrophilic reactions, metal precipitation, and metal coordination. In addition, we also outline complementary activity-based probes for imaging reductant-labile and sulfane sulfur species, including persulfides and polysulfides. For probes highlighted in this Review, we focus on small molecule systems with demonstrated compatibility in cellular systems or related applications. Building from breadth of reported activity-based strategies and application, we also highlight key unmet challenges and future opportunities for advancing activity-based probes for H2S and related RSS.

Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review

Hydrogen sulfide (H2S) is closely linked to not only environmental hazards, but also it affects human health due to its toxic nature and the exposure risks associated with several occupational settings. Therefore, detection of this pollutant in water sources has garnered immense importance in the analytical research arena. Several research groups have devoted great efforts to explore the selective as well as sensitive methods to detect H2S concentrations in water. Recent studies describe different strategies for sensing this ubiquitous gas in real-life water samples. Though many of the designed and developed H2S detection approaches based on the use of organic small molecules facilitate qualitative/quantitative detection of the toxic contaminant in water, optical detection has been acknowledged as one of the best, attributed to the simple, highly sensitive, selective, and good repeatability features of the technique. Therefore, this review is an attempt to offer a general perspective of easy-to-use and fast response optical detection techniques for H2S, fluorimetry and colorimetry, over a wide variety of other instrumental platforms. The review affords a concise summary of the various design strategies adopted by various researchers in constructing small organic molecules as H2S sensors and offers insight into their mechanistic pathways. Moreover, it collates the salient aspects of optical detection techniques and highlights the future scope for prospective exploration in this field based on the limitations of the existing H2S probes.

A Chalcone-based Fluorescence Probe for H2S Detecting Utilizing ESIPT Coupled ICT Mechanism

The accurate and effective identification of hydrogen sulfide holds great significance for environmental monitoring. Azide-binding fluorescent probes are powerful tools for hydrogen sulfide detection. We combined the 2'-Hydroxychalcone scaffold with azide moiety to construct probe Chal-N3, the electron-withdrawing azide moiety was utilized to block the ESIPT process of 2'-Hydroxychalcone and quenches the fluorescence. The fluorescent probe was triggered with the addition of hydrogen sulfide, accompanied by great fluorescence intensity enhancement with a large Stokes shift. With excellent fluorescence properties including high sensitivity, specificity selectivity, and wider pH range tolerance, the probe was successfully applied to natural water samples.

NIR Light-Activated Mitochondrial RNA Cross-Linking Strategy for H2S Monitoring and Prolonged Colorectal Tumor Imaging

Molecular diffusion and leakage impede the long-term retention of probes/drugs and may cause potential adverse effects in theranostic fields. Spatiotemporally manipulating the organelle-immobilization behavior of probes/drugs for prolonged tumor retention is indispensable to achieving effective cancer diagnosis and therapy. Herein, we propose a rational strategy that could realize near-infrared light-activated ribonucleic acids (RNAs) cross-linking for prolonged tumor retention and simultaneously endogenous hydrogen sulfide (H2S) monitoring in colorectal tumors. Profiting from efficient singlet oxygen (1O2) generation from Cy796 under 808 nm light irradiation, the 1O2-animated furan moiety in Cy796 could covalently cross-link with cytoplasmic RNAs via a cycloaddition reaction and realize organelle immobilization. Subsequently, specific thiolysis of Cy796 assisted with H2S resulted in homologous product Cy644 with reduced 1O2 generation yields and enhanced absolute fluorescence quantum yields (from 7.42 to 27.70%) with blue-shifted absorption and emission, which avoided the molecular oxidation fluorescence quenching effect mediated by 1O2 and validated fluorescence imaging. Furthermore, studies have demonstrated that our proposed strategy possessed adequate capacity for fluorescence imaging and endogenous H2S detection in HCT116 cells, particularly accumulated at the tumor sites, and retained long-term imaging with excellent biocompatibility. The turn-on fluorescence mode and turn-off 1O2 generation efficiency in our strategy successfully realized a diminished fluorescence cross-talk and oxidation quenching effect. It is adequately envisioned that our proposed strategy for monitoring biomarkers and prolonged tumor retention will contribute tremendous dedication in the clinical, diagnostic, and therapeutic fields.

Gold Nanocluster-Based Ratiometric Probe with Surface Structure Regulation-Triggered Sensing of Hydrogen Sulfide in Living Organisms

The development of reliable probes for in vivo detection of hydrogen sulfide (H₂S) with high sensitivity and selectivity is of great significance due to its key roles in many pathological and physiological processes. Herein, it was found that H₂S could finely regulate surface structure of gold nanoclusters (AuNCs) through reduction of surface Au(I)-ligand motifs and further quench their fluorescence by a two-stage kinetic reaction process. Stage I showed the H₂S-assisted surface Au(I)-ligand reduction and Au(0) core growth with a rapid fluorescence decrease; stage II showed the surface structure optimization and reconstruction with a relatively slow fluorescence quenching. By virtue of the excellent fluorescence response of AuNCs to H₂S, a novel ratiometric fluorescence probe (RBDA) for sensing H₂S was designed through electrostatic attraction-induced fluorescence resonance energy transfer (FRET) between AuNCs and rhodamine B. The probe was facilely prepared, showing a straightforward, rapid ratiometric fluorescence response to H₂S with built-in self-calibration. It presented the high detection sensitivity with a detection limit (LOD) of 56 nM and an excellent sensing selectivity for H₂S over various other biological species. The probe was demonstrated to possess high biostability, low cytotoxicity, good cell and issue penetrability, and favorable biocompatibility. It realizes successful monitoring of both exogenous and endogenous H₂S levels in living cells and zebrafish.

A New Ratiometric Fluorescent Probe Based on BODIPY for Highly Selective Detection of Hydrogen Sulfide

Hydrogen sulfide (H₂S) as small molecular signal messenger plays key functions in numerous biological processes. The imaging detection of intracellular hydrogen sulfide is of great significance. In this work, a ratiometric fluorescent probe BH based on an asymmetric BODIPY dye for detection of H₂S was designed and synthesized. After the interaction with hydrogen sulfide, probe display colorimetric and ratiometric fluorescence response, with its maximum emission fluorescence wavelength red-shifted from 542 nm to 594 nm, which is attributed to the sequential nucleophilic reaction of H₂S leading to enhanced molecular conjugation after ring formation of the BODIPY skeleton. A special response mechanism has been fully investigated by NMR titration and MS, so that the probe has excellent detection selectivity. Furthermore, probe BH has low cytotoxicity and fluorescence imaging experiments indicate that it can be used to monitor hydrogen sulfide in living cells.

Development and Challenge of Fluorescent Probes for Bioimaging Applications: From Visualization to Diagnosis

Fluorescent probes have been used widely in bioimaging, including biological substance detection, cell imaging, in vivo biochemical reaction process tracking, and disease biomarker monitoring, and have gradually occupied an indispensable position. Compared with traditional biological imaging technologies, such as positron emission tomography (PET) and nuclear magnetic resonance imaging (MRI), the attractive advantages of fluorescent probes, such as real-time imaging, in-depth visualization, and less damage to biological samples, have made them increasingly popular. Among them, ultraviolet-visible (UV-vis) fluorescent probes still occupy the mainstream in the field of fluorescent probes due to the advantages of available structure, simple synthesis, strong versatility, and wide application. In recent years, fluorescent probes have become an indispensable tool for bioimaging and have greatly promoted the development of diagnostics. In this review, we focus on the structure, design strategies, advantages, representative probes and latest discoveries in application fields of UV-visible fluorescent probes developed in the past 3-5 years based on several fluorophores. We look forward to future development trends of fluorescent probes from the perspective of bioimaging and diagnostics. This comprehensive review may facilitate the development of more powerful fluorescent sensors for broad and exciting applications in the future.

Dinitrobenzene ether reactive turn-on fluorescence probes for the selective detection of H2S

Two novel fluorescent probes, namely, 3-(2,4-dinitrophenoxy)-2-(4-(diphenylamino)phenyl)-4H-chromen-4-one (P1) and 3-(2,4-dinitrophenoxy)-2-(pyren-1-yl)-4H-chromen-4-one (P2), were designed and synthesized here. The probes (P1 and P2) were found to be highly selective and sensitive toward hydrogen sulfide (H₂S) in the presence of a wide range of anions. The new probes (P1 and P2) were fully characterized by analytical, NMR spectroscopy (¹H and ¹³C), and ESI mass spectrometry. The sensing capability of chemodosimeters (P1 and P2) toward H₂S was confirmed by fluorescence studies. The 'turn-on' fluorescence was used to calculate the detection limit of probes (LOD), which were found to be 2.4 and 1.2 μM for P1 and P2, respectively. Moreover, the probes were tested for their cytotoxicity against HeLa cells using the MTT assay and found to be non-cytotoxic in nature; hence, the probes P1 and P2 were successfully utilized to visualize H₂S in the living cells.

A phase-transfer catalyst-based nanoreactor for accelerated hydrogen sulfide bio-imaging

Hydrogen sulfide (H₂S) is an important signaling molecule in various biological processes; however, its real-time monitoring in living cells is hampered by long detection time for current fluorescent probes. To overcome this challenge, we designed a phase-transfer catalyst (PTC) approach to accelerate the reaction between the probe and the analyte by conjugating common fluorescent probes - mostly hydrophobic small molecules - with an amphiphilic PEG-PPG-PEG polymer, enabling the controllable assembly of H₂S nanoprobes in an aqueous solution. The PEG block helps to establish a PTC microenvironment that endows the assembled nanoprobes with a significantly reduced detection time (3-10 min; versus 20-60 min for small-molecule probes). Based on this approach, we synthesised two nanoprobes of different wavelengths, DS-Blue-nano and DN-Green-nano, which can sensitively detect H₂S in living macrophage cells with bright fluorescence starting at as early as 7 min and reaching stability at 15 min. These data suggest PTC-based nanoprobes as a new and generic approach for constructing sensitive fluorescent probes for the real-time imaging of H₂S, and perhaps other molecules in future, under biological conditions.

A novel fluorescent probe for detecting hydrogen sulfide in osteoblasts during lipopolysaccharide-mediated inflammation under periodontitis

Periodontitis, one of the most common chronic inflammatory diseases, affects the quality of life. Osteogenesis plays an important role in the disease. There is a connection between hydrogen sulfide (H₂S) and periodontitis, but according to the study has been published, the precise role of H₂S in inflammation remains in doubt. The main reason for the lack of research is that H₂S is an endogenous gasotransmitter, difficult to discern through testing. So, we synthesized a novel fluorescence probe which can detect H₂S in vitro. By using the novel H₂S fluorescence probe, we found that H₂S changes in osteoblasts mainly by cystathionine-γ-lyase, and H₂S increases under LPS stimulation. H₂S could be a potential marker for diagnosis of inflammatory diseases of bone, and might help deepen studies of the changes of H₂S level and promote the progression on the researches about pathogenesis of periodontitis.

A near-infrared and lysosomal targeting thiophene-BODIPY photosensitizer: Synthesis and its imaging guided photodynamic therapy of cancer cells

In this study, a novel NIR and lysosomal targeting thiophene-BODIPY photosensitizer SBOP-Lyso was synthesized to explore its potential applications in photodynamic therapy of A549 cells. In the strategy of designing SBOP-Lyso, S atom in thiophene as well as heavy atom I were introduced to promote ISC efficiency to ensure high singlet oxygen yield. A common lysosome targeted group (M₁: 1-(2-morpholinoethyl)-1H-indole-3-carbaldehyde) was linked to SBOP to extend its wavelength to the NIR region. Its absorption peak was at 660 nm (ε_max = 5.2 × 10⁴ cm^-1 M^-1) and its corresponding emission peak was located at 705 nm. Singlet oxygen could be quickly generated by SBOP-Lyso in the presence of 660 nm LED irradiation and the singlet oxygen yield was up to 44.1%. In addition, it also had good biocompatibility and could enter cells or zebrafish in a short time. SBOP-Lyso had negligible dark cytotoxicity (cell survival rate > 80%) and excellent phototoxicity (IC₅₀ = 0.2 μM). DCFH-DA (ROS indicator) proved that SBOP-Lyso could generate singlet oxygen with 660 nm LED irradiation. Singlet oxygen produced by SBOP-Lyso could kill cancer cells in PDT process and it had the ability to effectively inhibit A549 cells migration. Besides that, lysosomal colocalization assay showed that it had good lysosomal localization ability (Pearson colocation coefficient, R = 0.93). Considering the above results, SBOP-Lyso as a unique lysosome-targeted photosensitizer with excellent properties would exhibit positive results in PDT process of cancer cells.

Construction of a dual-response fluorescent probe for copper (II) ions and hydrogen sulfide (H2S) detection in cells and its application in exploring the increased copper-dependent cytotoxicity in present of H2S

Multiple types of metal ions and active small molecules (reactive nitrogen species, reactive oxygen species, reactive sulfur species, etc.) exist in living organisms. They have connections to each other and can interact and/or interfere with each other. To investigate the relationship of metal ions and active small molecules in living cells, it is necessary and critical to develop molecular tools that can track two kinds of associated certain metal ions and reactive molecules with multiple fluorescence signals. However, this is a challenging task that requires an ingenious molecular design to achieve this goal. Here, we present a fluorescent probe (D-CN) that can offer fluorescence imaging of H₂S and copper (II) ions with different response signals. Recognition of H₂S and Cu (II) by the new probe can result in green and red emissions, respectively, providing different signal responses to the two substances in living cells and zebrafish. In addition, we used this probe to visually prove that the cytotoxicity of copper ions in living cells increases in the presence of hydrogen sulfide and could lead to cell apoptosis.

A fluorescence turn-on probe for hydrogen sulfide and biothiols based on PET & TICT and its imaging in HeLa cells

In this paper, a photoinduced electron transfer (PET)& twisted intramolecular charge transfer (TICT)-based fluorescent probe (1) for detecting biothiols (GSH/Cys/Hcy) and hydrogen sulfide with fluorescence turn on was developed. The probe could recognize hydrogen sulfide over primary ions and selectively detect GSH/Cys/Hcy over other amino acids with fluorescence turn-on (an ESIPT process). H₂S can be distinguished from GSH/Cys/Hcy with wavelength shift by UV-Vis spectra. In addition, detection limits for H₂S/GSH/Cys/Hcy of probe 1 were 1.42 μM (0-100 μM), 0.13 μM (0-40 μM), 0.27 (0-30 μM), 0.22 μM (0-40 μM), respectively. The proposed thiolysis of the 2,4-dinitrochlorophenyl ether reaction in identification process was verified by the characteristic peak in ¹H NMR and HRMS spectra. Finally, the biological imaging experiments and low cytotoxicity investigations in HeLa cells demonstrated that probe 1 could provide a promising method for the determination of H₂S and biothiols in aqueous solution and living cells.

Gasotransmitter signaling in energy homeostasis and metabolic disorders

Gasotransmitters are small molecules of gases, including nitric oxide (NO), hydrogen sulfide (H₂S), and carbon monoxide (CO). These three gasotransmitters can be endogenously produced and regulate a wide range of pathophysiological processes by interacting with specific targets upon diffusion in the biological media. By redox and epigenetic regulation of various physiological functions, NO, H₂S, and CO are critical for the maintenance of intracellular energy homeostasis. Accumulated evidence has shown that these three gasotransmitters control ATP generation, mitochondrial biogenesis, glucose metabolism, insulin sensitivity, lipid metabolism, and thermogenesis, etc. Abnormal generation and metabolism of NO, H₂S, and/or CO are involved in various abnormal metabolic diseases, including obesity, diabetes, and dyslipidemia. In this review, we summarized the roles of NO, H₂S, and CO in the regulation of energy homeostasis as well as their involvements in the metabolism of dysfunction-related diseases. Understanding the interaction among these gasotransmitters and their specific molecular targets are very important for therapeutic applications.

A Fluorescent Probe for Selective Facile Detection of H2S in Serum Based on an Albumin-Binding Fluorophore and Effective Masking Reagent

A fluorescent probe (4-(2-(4-(diethylamino)phenyl)-4-methyl-5-oxo-4,5-dihydrothieno[3,2-b]pyridin-7-yl)phenyl 2,4-dinitrobenzenesulfonate, KF-DNBS) for facile detection of H₂S in serum was developed based on the combination of an environment-sensitive fluorophore (2-(4-(diethylamino)phenyl)-7-(4-hydroxyphenyl)-4-methylthieno[3,2-b]pyridin-5(4H)-one, KF) with albumin and the 2,4-dinitrobenzene sulfonyl (DNBS) group as a recognition unit for H₂S. KF-DNBS showed remarkable fluorescence enhancement due to H₂S-triggered thiolysis followed by the formation of a fluorescent fluorophore (KF)-albumin complex. The H₂S detection limit of KF-DNBS was estimated to be 3.2 μM, and KF-DNBS achieves a high selectivity to H₂S over biothiols by employing 2-formyl benzene boronic acid (2-FBBA) as an effective masking reagent. Furthermore, under optimized sensing conditions, KF-DNBS could be applied to accurately determine spiked H₂S in human serum without the need for any further procedure for the removal of serum proteins.

Sensing and Bioimaging of the Gaseous Signaling Molecule Hydrogen Sulfide by Near-Infrared Fluorescent Probes

A fluorescent probe for the monitoring of H₂S levels in living cells and organisms is highly desirable. In this regard, near-infrared (NIR) fluorescent probes have emerged as a promising tool. NIR-I and NIR-II probes have many significant advantages; for instance, NIR light penetrates deeper into tissue than light at visible wavelengths, and it causes less photodamage during biosample analysis and less autofluorescence, enabling higher signal-to-background ratios. Therefore, it is expected that fluorescent probes having emission in the NIR region are more suitable for in vivo imaging. Consequently, a considerable increase in reports of new H₂S-responsive NIR fluorescent probes appeared in the literature. This review highlights the advances made in developing new NIR fluorescent probes aimed at the sensitive and selective detection of H₂S in biological samples. Their applications in real-time monitoring of H₂S in cells and in vivo for bioimaging of living cells/animals are emphasized. The selection of suitable dyes for designing NIR fluorescent probes, along with the principles and mechanisms involved for the sensing of H₂S in the NIR region, are described. The discussions are focused on small-molecule and nanomaterials-based NIR probes.

Mitochondria-targeted fluorescent probe for imaging endogenous hydrogen sulfide in cellular antioxidant stress

Hydrogen sulfide (H₂S) is believed to play an important role in maintaining cellular redox homeostasis and avoiding oxidative damage caused by abnormally raised ROS levels. Highly selective and sensitive fluorescent probes for the detection and imaging of endogenous H₂S in living cells over other biological thiols are desirable. Herein, we developed a mitochondria-targeted fluorescent probe L, a thioxanthene-benzo[e]indolium derivative, for the discrimination of H₂S from other chemically similar biothiols. Based on the nucleophilic addition of H₂S and the charged electron-deficient C[double bond, length as m-dash]N double bond within the benzo[e]indolium moiety, the generation of L-HS with a shortened π-conjugated system led to significant spectral changes in the visible region. Importantly, the probe L with mitochondria-targeting ability has been successfully used for imaging the endogenous H₂S biosynthesized from Cys and GSH and in cellular antioxidant stress.

Dimethylamino naphthalene-based fluorescent probes for hydrogen sulfide detection and living cell imaging

Hydrogen sulfide shows great importance in various physiological and biochemical processes. The development of fluorescence probes for facile and efficient detection of H₂S has attracted increasing attention of researchers. Herein, we synthesized two fluorescence probes based on simple naphthalene structure for detection of H₂S. Upon reaction with H₂S, the probe DN-DM exhibited a red fluorescence emission with large Stokes shift. The probe showed high sensitivity, pH insensitivity and good selectivity for H₂S over other analytes including common biothiols. The detection mechanism was based on the thiolysis of the dinitrophenyl ether moiety, which was confirmed by ¹H NMR spectral analysis. The DFT calculation was also performed for a deeper understanding of the photophysical properties. In addition, these probes showed good cell-membrane permeability and could be utilized for detection of H₂S in living cells.

BODIPY-Based Fluorescent Probes for Biothiols

Fluorescent probes for biothiols have aroused increasing interest owing to their potential to enable better understanding of the diverse physiological and pathological processes related to the biothiol species. BODIPY fluorophores exhibit excellent optical properties, which can be readily tailored by introducing diverse functional units at various positions of the BODIPY core. In the present review, the development of fluorescent probes based on BODIPYs for the detection of biothiols are systematically summarized, with emphasis on the preferable detection of individual biothiols, as well as simultaneous discrimination among cysteine (Cys), homocysteine (Hcy), reduced glutathione (GSH). In addition, organelle-targeting probes for biothiols are also highlighted. The general design principles, various recognition mechanisms, and biological applications are elaboratively discussed, which could provide a useful reference to researchers worldwide interested in this area.

Construction of ratiometric hydrogen sulfide probe with two reaction sites and its applications in solution and in live cells

Hydrogen sulfide (H₂S), as the third multifunctional signaling biomolecule, it acts as a neuromodulator in the human brain and is recognized as an important gas transmitter in human physiology. The abnormal concentrations of H₂S in human cells can result in several common diseases. Therefore, accurate, fast, and reliable methodologies are required for measuring the in vitro and in vivo concentrations of H₂S to further investigate its function. In this study, a novel DR-SO₂N₃ fluorescent probe containing the fluorophore Disperse Red 277 and a sulfonyl azide group was developed and exploited based on the structural characteristic of Disperse Red 277 that contains the active site easily can be attacked by HS^-. Therefore, this probe featured two reaction sites that involved the reduction and Michael addition of H₂S and exhibited rapid ratiometric fluorescence changes and high selectivity towards H₂S with a 619-fold enhancement factor. Further, the density functional theory (DFT)/time-dependent density functional theory (TDDFT) studies are conducted to understand the photophysical properties of DR-SO₂N₃ and the final product DRHS-SO₂NH₂, which makes the proposed mechanism more reasonable. Furthermore, the probe was successfully applied for the ratiometric fluorescence imaging of exogenous H₂S in living cells.

A photostable fluorescent probe based on PET off for the detection of hydrogen sulfide and its application in bioimaging

As an important small gas signal molecule, H₂S has become an important research hotspot for both chemists and biologists.

The synthesis and bioimaging of a biocompatible hydrogen sulfide fluorescent probe with high sensitivity and selectivity

Hydrogen sulfide (H₂S), a well-known poisonous gas, has been recognized as a critical endogenous gas transmitter in the past decade.

2-(4-Boronophenyl)quinoline-4-carboxylic acid derivatives: Design and synthesis, aggregation-induced emission characteristics, and binding activity studies for D-ribose with long-wavelength emission

Long-wavelength fluorescent sensors with large Stokes shifts show useful applications in chemical biology and clinical laboratory diagnosis. We have recently reported [4-(4-{[3-(4-boronobenzamido)propyl]carbamoyl}quinolin-2-yl)phenyl]boronic acid that can selectively recognize d-ribose in a buffer solution of pH 7.4. However, the short emission wavelength (395 nm) and aggregation-caused quenching effect are not conducive to applications as a sensor. Novel diboronic acid compounds are synthesized using 2-(4-boronophenyl)quinoline-4-carboxylic acid as the building block and p-phenylenediamine as the linker. These compounds show aggregation-induced emission and fluorescence emission at about 500 nm. In addition, after binding to most carbohydrates, the aggregated state of the boronic acid–containing compounds is dissociated, resulting in fluorescence quenching. Using [4-(4-{[4-(3-borono-5-methoxybenzamido)phenyl]carbamoyl}quinoline-2-yl)phenyl]boronic acid as an example, addition of 55 mM of d-ribose resulted in the strongest quenching of 83% for all the tested carbohydrates, indicating selectively recognizing d-ribose. The reciprocal of the fluorescence intensity change showed a good linear relationship with the reciprocal of d-ribose concentration ( R2 ⩾ 0.99), indicating sensor binding to d-ribose in a ratio of 1:1 to form an inclusion complex. The fluorescence emission is red-shifted compared to 2-(4-boronophenyl)quinoline-4-carboxylic acid and its common derivatives, which provides a new method for the development of long-wavelength fluorescent sensors.

An ultrasensitive and visible lighting-up probe for imaging thiophenols in water samples, in serum and visualizing thiophenols-induced oxidative stress process in live cells

Thiophenols, a class of significant industrial materials, are extremely toxic in environmental as well live cells. However, the process of live cells responding to thiophenols is not well understood. Herein, an innovative "OFF-ON" probe FY for thiophenols selectively in 100% aqueous solution was reported. It featured rapid response (~150 s), prominent sensitivity (detection limit: 5 nM), and large Stokes shift (~104 nm), which assured specific detection of thiophenols in A375 cells, HeLa cells and environment. Especially, it proved that thiophenols in live cells can be eliminated by endogenous reactive oxygen species (ROS), indicating that thiophenols may result in cellular oxidative stress. As well, it was resoundingly put into recognizing of thiophenols quantitatively in actual water samples and in serum.

A colorimetric and near-infrared fluorescent probe for detection of hydrogen sulfide and its real multiple applications

A novel colorimetric and near-infrared fluorescent probe (L) with D-π-A structure derived from 4-diethylaminosalicylaldehyde and 2-(3-cyano-4,5,5-trimethylfuran-2(5H)-ylidene)malononitrile has been developed. Probe L displays highly selective and sensitive recognition for H₂S over various anions with a large Stokes shift (96 nm) in DMF/H₂O (3/7, v/v, PBS-HCl 10 mM, pH = 7.4). A naked-eye observable color change of L solution from colorless to bluish-purple occurred on treatment with H₂S. The potential applications of probe L were evaluated and the results show that probe L can detect H₂S vapor and H₂S in real water, red wine and living cells.

Modulation of fluorescence sensing properties of coumarin-based fluorescent probe for H2S and its application in cell imaging

A coumarin-based turn on probe, named 3-((E)-3-(1H-indol-3-yl)acryloyl)-2H-chromen-2-one(IAC) was designed and synthesized for the detection of H₂S in aqueous medium. IAC showed no obvious red fluorescence in Tris-HCl(pH = 7.2, 60% DMF), a 28.2-fold fluorescence enhancement was found when 40 equiv. H₂S was added. Other analytes such as anions, metal ions and GSH, Cys, Gly did no significant fluorescence enhancement at 580 nm to IAC. The red fluorescence enhancement mechanism between IAC and H₂S was considered by DFT and ESI-MS. Overall, IAC was successfully applied in cell imaging.

Endoplasmic reticulum targeted fluorescent probe for the detection of hydrogen sulfide based on a twist-blockage strategy

Hydrogen sulfide (H₂S) is very important for humans and is involved in many physiological processes. Here, we designed and reported a new naked-eye colorimetric fluorescent probe Z1 for detecting H₂S in absolute HEPES solution. The fluorescence intensity, after the reaction of the probe and H₂S, is about 32 times that of the probe alone. When the concentration of H₂S is 0-100 μM, the detection limit (DL) is rather low at about 0.15 μM (3σ/slope). The response mechanism is based on the leaving of the 2,4-dinitrobenzene moiety, followed by intramolecular cyclization to give a fluorescent iminocoumarin-benzothiazole group. Moreover, Z1 was applied to endogenous and exogenous H₂S imaging in living cells. The high overlap coefficient proved that probe Z1 has good ER-tracker localization in living cells.

Perylenequinone-based "turn on" fluorescent probe for hydrogen sulfide with high sensitivity in living cells

Hydrogen sulfide (H₂S) is a kind of gaseous signal molecule in many physiological processes. In order to detect H₂S, a novel "turn on" fluorescent probe 6,12-dihydroxyperylene-1,7-dione (DPD) was designed and synthesized. The probe DPD is fluorescence silence, while the addition of H₂S induces an obvious green fluorescence with an obvious color change from dark blue to yellow-green. The probe shows excellent selectivity, fast response (2.5min) and linear curve (0-90μM) in wide effective pH range (4-10). Competition experiments are also revealed in corresponding studies and the detection limit is 3.6μM. The response mechanism is proved to be the reduction of the probe by H₂S, which is confirmed by ¹H NMR. Furthermore, through the fluorescence turn-on signal toward H₂S in Hela cells, probe DPD was successfully applied to monitor H₂S in living Hela cells.

A fluorescent probe for carbon monoxide based on allyl ether rather than allyl ester: A practical strategy to avoid the interference of esterase in cell imaging

Pd⁰-mediated Tsuji-Trost reaction is a practical strategy to design fluorescent probes for carbon monoxide (CO) sensing, and in such reaction CO can reduce Pd²⁺ to Pd⁰ in-situ and remove allyl groups on fluorophores. In most of these probes, esters are commonly used to link allyl on fluorophores. We found that the ester groups could be hydrolyzed by esterase activity of fetal bovine serum (FBS), while FBS is a requisite in cell culture, and the hydrolysis could interfere the Pd⁰-mediated Tsuji-Trost reaction. In this study, we synthesized a fluorescent probe (Cou-CO) using allyl ether as reaction site rather than allyl ester. Cou-CO is non-fluorescence, and could react with CO under the presence of Pd⁰ to form Cou with strong fluorescence, and the maximum excitation and emission wavelengths of Cou are 464 nm and 495 nm respectively. Cou-CO shows excellent selectivity to CO and could avoid the effect of FBS with the limit of detection for CO is 78 nm. Finally, Cou-CO was successfully applied for imaging of CO in living cells.

HS- facilitated sulfur pyran realizing hydrogen sulfide detection and imaging in HepG2 cells and chlorella

The new carbazole-based fluorescent probe CA-1 was designed and synthesized for the high selective detection of H₂S based on HS^- facilitated sulfur pyran resulting in UV-Vis and fluorescent spectra changes. At the same time, the probe showed good sensitivity to the detection of H₂S with a low detection limit of 0.16 μM. The detection process can be monitored by naked eye: with the addition of H₂S, the probe system changed from yellow to pink. Importantly, the probe could be applied in monitoring H₂S in HepG2 cells and Chlorella. These results indicate that CA-1 can be used as a promising fluorescent probe for the detection of H₂S in situ.

Fast response near-infrared fluorescent probe for hydrogen sulfide in natural waters

Rapid and sensitive detection of hydrogen sulfide (H₂S) is of great importance for the environmental monitoring. Near-infrared fluorescent probes are recently developed for the sensitive H₂S detection thanks to their low background interference, while often hampered by relatively long response time (around 30 min). In this work, we reported a fast response (within 5 min), highly sensitive near-infrared (NIR) fluorescent probe (DCM-OCN) for H₂S. The rapid nucleophilic reaction between cyanate moiety and H₂S endowed fast response of the NIR probe. The influence of experimental parameters (including CTAB concentration, reaction time, pH value etc.), interference study, and possible mechanism were investigated in detail. The fluorescence increment was linear with H₂S concentration in 1-10 μM with a detection limit of 0.28 μM (3σ). The probe was successfully applied to environmental water samples including river water, tap water, lake water, mineral water and artificial wastewater.

A Visible Colorimetric Fluorescent Probe for Hydrogen Sulfide Detection in Wine

A new efficient and practical fluorescent probe 6-(benzo[d]thiazol-2-yl)naphthalen-2-yl-thiophene-2-carboxylate (probe 1) was synthesized to detect hydrogen sulfide (H₂S). The addition of H₂S caused the solution of probe 1 to change from colorless to yellow, and the solution of probe 1 changes to different colors with respect to different concentrations of H₂S. Importantly, probe 1 could help detect H₂S efficiently by a distinct color response as a visible detection agent. Probe 1 reacted with various concentrations of H₂S (0-200 μM), and the detection limit for H₂S was 0.10 μM. Particularly, probe 1 can be applied as a sensor to detect H₂S accurately in wine samples.

Effect of substituents on Stokes shift of BODIPY and its application in designing bioimaging probes

BODIPY-based probes have excellent fluorescence properties. However, small Stokes shifts approximately 5-15 nm greatly affect their detection sensitivity. In this study, we compared the Stokes shifts of reported BODIPY-based probes with various of substituents, and found that the phenyl groups on the specific position of BODIPY core could expand the Stokes shift of BODIPY-based probes, and methoxy groups on these phenyl substituents could enhance such effects. Then, by quantum chemical calculations, we found that the number of methoxy groups might also have obvious effect on the Stokes shift of BODIPY. Taking nitric oxide (NO) as analyte, 4,4-difluoro-8-(3,4-diaminophenyl)-3,5-bis(2,4-dimethoxyphenyl)-4-bora-3a,4a-diaza-s-indancene (DMOPB) with diaminophenyl substituents has been designed and synthesized. Compared with monomethoxy-phenyl substituted BODIPY-based probes (MOPBs) in our previous work, Stokes shift of DMOPB was expanded by 10 nm when using dimethoxyphenyl instead of monomethoxyphenyl, which is basically consistent with the quantum chemistry calculation of 11 nm. DMOPB can react with NO in only 2 min to form the triazole DMOPB-T with a fluorescence quantum yield of 0.32. An excellent linear relationship was observed in the range of NO concentration from 0.5 μM to 4 μM and the detection limit was 1 nM. The experimental results indicate that DMOPB with high sensitivity, excellent selectivity, low toxicity and dark background can be a great candidate for imaging NO in cells and tissues. Considering the lack of practical way to increase Stokes shift of small-molecule fluorescent probes based on specific fluorophore, the proposed strategy has great potential for the designing of probes with large Stokes shift.

A rhodamine-based fluorescent probe for colorimetric and fluorescence lighting-up determination of toxic thiophenols in environmental water and living cells

Thiophenols are a class of highly toxic environmental pollutant, hence it is very necessary to monitor thiophenols in environment and living cells with an efficient and reliable method. Herein, a novel fluorescent probe for thiophenols has been developed, which exhibited a colorimetric and fluorescence turn-on dual response towards thiophenols with good selectivity and fast response. The sensing mechanism for thiophenols was attributed to nucleophilic substitution reaction, which was confirmed by HPLC. The probe exhibited good recovery (from 90% to 107%) and low limit of detection for thiophenols (37nM) in industrial wastewater. Moreover, the probe has been successfully employed to visualize thiophenol in living cells. Therefore, the fluorescent probe has good capability for monitoring thiophenols in environmental samples and biological systems.

A novel long-wavelength fluorescent probe for selective detection of hydrogen sulfide in living cells

Sensitive detection of endogenous H₂S by a low cytotoxicity probe.