Designing Biobased Recyclable Polymers for Plastics

Bioplastic packaging in circular economy: A systems-based policy approach for multi-sectoral challenges

Bioplastics have long been publicized as a sustainable plastic packaging alternative; however, their widespread industrialization is still embryonic due to complex challenges spanning multiple sectors. This review critically analyses the bioplastic lifecycle and provides a holistic evaluation of both the opportunities and potential trade-offs along their value chain. Their lifecycle is divided into three sectors: 1) resources, extraction, and manufacturing, 2) product consumption which discusses availability, consumer perception, and marketing strategies, and 3) end-of-life (EoL) management which includes segregation, recycling, and disposal. In the production phase, the primary challenges include selection of suitable raw feedstocks and addressing the techno-economic constraints of manufacturing processes. To tackle these challenges, it is recommended to source sustainable feedstocks from innovative, renewable, and waste materials, adopt green synthesis mechanisms, and optimize processes for improved efficiency. The consumption phase encompasses challenges related to market availability, cost competitiveness, and consumer perception of bioplastics. Localizing feedstock sourcing and production, leveraging the economics of scale, and promoting market demand for recycled bioplastics can positively influence the market dynamics. Additionally, dispelling misconceptions about degradability through proper labeling, and employing innovative marketing strategies to enhance consumer perception of the mechanical performance and quality of bioplastics is crucial. During the EoL management phase, major challenges include inadequate awareness, inefficient segregation protocols, and bioplastics with diverse properties that are incompatible with existing waste management infrastructure. Implementing a standardized labeling system with clear representation of suitable EoL techniques and integrating sensors and machine learning-based sorting technologies will improve segregation efficiency. Further, establishing interconnected recycling streams that clearly define the EoL pathways for different bioplastics is essential to ensure circular waste management systems. Finally, designing a comprehensive systems-based policy framework that incorporates technical, economic, environmental, and social drivers is recommended to promote bioplastics as a viable circular packaging solution.

Microbial strategies for effective microplastics biodegradation: Insights and innovations in environmental remediation

Microplastics (MPs), diminutive yet ubiquitous fragments arising from the degradation of plastic waste, pervade environmental matrices, posing substantial risks to ecological systems and trophic dynamics. This review meticulously examines the origins, distribution, and biological impacts of MPs, with an incisive focus on elucidating the molecular and cellular mechanisms underpinning their toxicity. We highlight the indispensable role of microbial consortia and enzymatic pathways in the oxidative degradation of MPs, offering insights into enhanced biodegradation processes facilitated by innovative pretreatment methodologies. Central to our discourse is the interplay between MPs and biota, emphasizing the detoxification capabilities of microbial metabolisms and enzymatic functions in ameliorating MPs' deleterious effects. Additionally, we address the practical implementations of MP biodegradation in environmental remediation, advocating for intensified research to unravel the complex biodegradation pathways and to forge effective strategies for the expeditious elimination of MPs from diverse ecosystems. This review not only articulates the pervasive challenges posed by MPs but also positions microbial strategies at the forefront of remedial interventions, thereby paving the way for groundbreaking advancements in environmental conservation.

Study of the Preparation and Properties of Chemically Modified Materials Based on Rapeseed Meal

In recent years, there has been increasing interest in developing novel materials based on natural biopolymers as a renewable alternative to petroleum-based plastics. The availability of proteins derived from agricultural by-products, along with their favourable properties, has fostered a renewed interest in protein-based materials, promoting research in innovative technologies. In this study, we propose the use of rapeseed protein-rich meal as the main ingredient for the preparation of novel sustainable materials combining excellent environmental properties such as biodegradability and renewability. The application of sustainable products in the present high-tech society requires the modification of the basic native properties of these natural compounds. The original route proposed in this paper consists of preparation via the compression moulding of flexible biomaterials stabilized by crosslinkers/chain extenders. An investigation of the effects of different denaturing and disulfide bond reducing agents, crosslinkers, and preparation conditions on the material mechanical behaviour demonstrated that the novel materials have appreciable strength and stiffness. The results show the potential of utilizing full meal from vegetable by-products to prepare protein-based materials with guaranteed ecofriendly characteristics and mechanical properties adequate for specific structural applications.

Mechanically triggered on-demand degradation of polymers synthesized by radical polymerizations

Polymers that degrade on demand have the potential to facilitate chemical recycling, reduce environmental pollution and are useful in implant immolation, drug delivery or as adhesives that debond on demand. However, polymers made by radical polymerization, which feature all carbon-bond backbones and constitute the most important class of polymers, have proven difficult to render degradable. Here we report cyclobutene-based monomers that can be co-polymerized with conventional monomers and impart the resulting polymers with mechanically triggered degradability. The cyclobutene residues act as mechanophores and can undergo a mechanically triggered ring-opening reaction, which causes a rearrangement that renders the polymer chains cleavable by hydrolysis under basic conditions. These cyclobutene-based monomers are broadly applicable in free radical and controlled radical polymerizations, introduce functional groups into the backbone of polymers and allow the mechanically gated degradation of high-molecular-weight materials or cross-linked polymer networks into low-molecular-weight species.

A progress update on the biological effects of biodegradable microplastics on soil and ocean environment: A perfect substitute or new threat?

Conventional plastics are inherently difficult to degrade, causing serious plastic pollution. With the development of society, biodegradable plastics (BPs) are considered as an alternative to traditional plastics. However, current research indicated that BPs do not undergo complete degradation in natural environments. Instead, they may convert into biodegradable microplastics (BMPs) at an accelerated rate, thereby posing a significant threat to environment. In this paper, the definition, application, distribution, degradation behaviors, bioaccumulation and biomagnification of BPs were reviewed. And the impacts of BMPs on soil and marine ecosystems, in terms of physicochemical property, nutrient cycling, microorganisms, plants and animals were comprehensively summarized. The effects of combined exposure of BMPs with other pollutants, and the mechanism of ecotoxicity induced by BMPs were also addressed. It was found that BMPs reduced pH, increased DOC content, and disrupted the nitrification of nitrogen cycle in soil ecosystem. The shoot dry weight, pod number and root growth of soil plants, and reproduction and body length of soil animals were inhibited by BMPs. Furthermore, the growth of marine plants, and locomotion, body length and survival of marine animals were suppressed by BMPs. Additionally, the ecotoxicity of combined exposure of BMPs with other pollutants has not been uniformly concluded. Exposure to BMPs induced several types of toxicity, including neurotoxicity, gastrointestinal toxicity, reproductive toxicity, immunotoxicity and genotoxicity. The future calls for heightened attention towards the regulation of the degradation of BPs in the environment, and pursuit of interventions aimed at mitigating their ecotoxicity and potential health risks to human.

Recycling Waste Agricultural Nets as Cement Composites

The advancement of agricultural mesh technology has contributed to its improved properties. As a result, agricultural nets are widely adopted in large-scale farming applications, for example, in cereal crop farming. However, a consequence of this increased use of agricultural nets is the accumulation of large amounts of waste. The current paper focuses on the recycling of agricultural nets used in wrapping straw bales to develop additives and fillers in cement composites. The research details an analysis of the use of waste agricultural meshes as an ingredient in cement composites. Six test series of different mixtures were conducted. In the first four series, agricultural waste was utilised as an additive in a composite comprising aggregate and cement slurry (the amounts of wasted nets were 20, 40, 60, and 80 kg/m3). In the last test series, the recyclate utilised comprised a mixture of cement slurry and waste only. The composites were subjected to standard tests and thermal resistance tests. The results showcased that that the addition of a net worsened the workability of the concrete mixture, and with increasing amounts of addition, the consistency of the mixture could change from liquid to dense plastic. The flexural strength of the composite decreased with increasing amounts of recyclate. In subsequent test series, the flexural strength value was lower than that of the control (3.93 MPa), from 7.38% (3.64 MPa) for the composite with 20 kg/m3 of recyclate to 37.66% (2.45 MPa) for the composite with of 80 kg/m3 recyclate. The flexural strength value of the net-filled composite without aggregate was very high (10.44 MPa), where the value obtained for the control composite was 62.36% lower. The results of the compressive strength test showed a decrease in this parameter with increasing amounts of additive. The value assessed for the control composite was 27.99 MPa. As expected, the composite that had no aggregate and consisted of only recycled filler had the lowest compressive strength. The value of this parameter was 13.07 MPa, and it was 53.31% lower than that of the control composite. The results of the tests of resistance to temperatures were similar to those recorded for the composites with polypropylene fibres. All composites demonstrated a significant decrease in their compressive and flexural strength after annealing. SEM imaging showed that the net fibres were closely bonded to the cement stone. Finally, it was concluded that recyclates performed best as fillers in lightweight composites with a low density, low absorption, high flexural strength, and satisfactory compressive strength.

Emerging isolation and degradation technology of microplastics and nanoplastics in the environment

Microplastics (MPs, less than 5 mm in size) are widely distributed in surroundings in various forms and ways, and threaten ecosystems security and human health. Its environmental behavior as pollutants carrier and the after-effects exposed to MPs has been extensively exploited; whereas, current knowledge on technologies for the separation and degradation of MPs is relatively limited. It is essential to isolate MPs from surroundings and/or degrade to safe levels. This in-depth review details the origin and distribution of MPs. Provides a comprehensive summary of currently available MPs separation and degradation technologies, and discusses the mechanisms, challenges, and application prospects of these technologies. Comparison of the contribution of various separation methods to the separation of NPs and MPs. Furthermore, the latest research trends and direction in bio-degradation technology are outlooked.

Bio-Based Polymers for Environmentally Friendly Phase Change Materials

Phase change materials (PCMs) have received increasing attention in recent years as they enable the storage of thermal energy in the form of sensible and latent heat, and they are used in advanced technical solutions for the conservation of sustainable and waste energy. Importantly, most of the currently applied PCMs are produced from non-renewable sources and their carbon footprint is associated with some environmental impact. However, novel PCMs can also be designed and fabricated using green materials without or with a slight impact on the environment. In this work, the current state of knowledge on the bio-based polymers in PCM applications is described. Bio-based polymers can be applied as phase-change materials, as well as for PCMs encapsulation and shape stabilization, such as cellulose and its derivatives, chitosan, lignin, gelatin, and starch. Vast attention has been paid to evaluation of properties of the final PCMs and their application potential in various sectors. Novel strategies for improving their thermal energy storage characteristics, as well as to impart multifunctional features, have been presented. It is also discussed how bio-based polymers can extend in future the potential of new environmentally-safe PCMs in various industrial fields.

Degradation of Polylactic Acid/Polypropylene Carbonate Films in Soil and Phosphate Buffer and Their Potential Usefulness in Agriculture and Agrochemistry

Blends of poly(lactic acid) (PLA) with poly(propylene carbonate) (PPC) are currently in the phase of intensive study due to their promising properties and environmentally friendly features. Intensive study and further commercialization of PPC-based polymers or their blends, as usual, will soon face the problem of their waste occurring in the environment, including soil. For this reason, it is worth comprehensively studying the degradation rate of these polymers over a long period of time in soil and, for comparison, in phosphate buffer to understand the difference in this process and evaluate the potential application of such materials toward agrochemical and agricultural purposes. The degradation rate of the samples was generally accompanied by weight loss and a decrease in molecular weight, which was facilitated by the presence of PPC. The incubation of the samples in the aqueous media yielded greater surface erosions compared to the degradation in soil, which was attributed to the leaching of the low molecular degradation species out of the foils. The phytotoxicity study confirmed the no toxic impact of the PPC on tested plants, indicating it as a "green" material, which is crucial information for further, more comprehensive study of this polymer toward any type of sustainable application.

Study of soil microplastic pollution and influencing factors based on environmental fragility theory

Soil microplastics (MPs) pollution is a global concern, but the distribution of MPs and the factors affecting the distribution of MPs in different ecologically fragile karst areas remain poorly understood. Here, we investigated the spatial distribution, characteristics, and composition of MPs in different ecologically fragile karst areas of Guizhou Province and explored the relationship between ecosystem fragility and MPs. Structural equation models combined with robust random forest (RF) models were used to clarify the effects of karst soil properties on MPs and quantify their relative contributions. The abundance of soil MPs in ecologically fragile karst areas was 2949 item kg-1, and the risk of MPs contamination was highest in medium-fragile areas. The robust RF models precisely predicted the abundance of soil MPs in different fragile areas, and the mean root mean square error and R2 were 0.21 and 0.93, respectively. The contribution of karst soil properties to the abundance of MPs was estimated. Some soil chemical properties had a significant effect (p < 0.05) on MPs pollution in ecologically fragile karst areas. The results of our study suggest that the fragile ecological environment may exacerbate MPs pollution. Our study also contributes to establish a scientific theoretical foundation for the utilization of plastics and the prevention and control of microplastics pollution in karst ecosystems.

Enzyme-based green synthesis, characterisation, and toxicity studies of cellulose nanocrystals/fibres produced from the Vetiveria zizanioides roots agro-waste

Vetiver zizanioides roots are considered the most useful part of the plant. It is widely used to extract oil. The aromatic oil is used in perfumery, food-flavouring and cosmetic industries. However, presently, there are no reports available for the usage of vetiver roots agro-waste after oil extraction in nano-based products. Considering the concept of value-added products and green-chemistry approaches, synthesising cellulose nanoparticles (CNPs) using enzymatic treatment from agro-waste has emerged as a viable option. CNP's non-toxicity, biodegradability, and biocompatibility have sparked the industry's interest in its production. Therefore, in the present study, 3 enzymes, cellulase, pectinase, and viscozymes, were used for the green synthesis of CNP. The characterisation of CNP was done using techniques like DLS, FTIR, TEM, SEM, AFM, and TG/DTG, and cytotoxicity of CNP was studied in human skin cell-line (HaCaT) using MTT assay. Results show that CNPs synthesised using viscozyme and pectinase were of crystalline nature (2.0-3.0 nm) and cellulase were of fibres (40-60 nm). The FTIR confirmed that CNPs were devoid of lignin/hemicellulose. The AFM pictures revealed thick and thin nanoparticles with a variety of morphologies. The thermal stability of cellulose was higher compared to CNP. All the synthesised CNPs were crystaline, with a 60-70% crystallinity index. Furthermore, CNP did not show cytotoxic effect on HaCaT cells upto 500 µg/mL concentrations. In conclusion, pectinase and viscosyme may be used for synthesing cellulose-nanocrystals and cellulase enzyme for cellulose-nanofibers from the vetiver roots agro-waste. The findings revealed that Vetiveria zizanioides agro-waste-derived CNP is a sustainable material that can be used as a reinforcing agent/nanocarrier in textile and drug-delivery systems.

Design of Microstructure-Engineered Polymers for Energy and Environmental Conservation

With the ever-growing demand for sustainability, designing polymeric materials using readily accessible feedstocks provides potential solutions to address the challenges in energy and environmental conservation. Complementing the prevailing strategy of varying chemical composition, engineering microstructures of polymer chains by precisely controlling their chain length distribution, main chain regio-/stereoregularity, monomer or segment sequence, and architecture creates a powerful toolbox to rapidly access diversified material properties. In this Perspective, we lay out recent advances in utilizing appropriately designed polymers in a wide range of applications such as plastic recycling, water purification, and solar energy storage and conversion. With decoupled structural parameters, these studies have established various microstructure-function relationships. Given the progress outlined here, we envision that the microstructure-engineering strategy will accelerate the design and optimization of polymeric materials to meet sustainability criteria.

Chemical recycling technologies for PVC waste and PVC-containing plastic waste: A review

The extensive production and consumption of plastics has resulted in significant plastic waste and plastic pollution. Polyvinyl chloride (PVC) waste has a high chlorine content and is the primary source of chlorine in the plastic waste stream, potentially generating hazardous chlorinated organic pollutants if treated improperly. This review discusses PVC synthesis, applications, and the current types and challenges of PVC waste management. Dechlorination is vital for the chemical recycling of PVC waste and PVC-containing plastic waste. We review dehydrochlorination and dechlorination mechanisms of PVC using thermal degradation and wet treatments, and summarize the recent progress in chemical treatments and dechlorination principles. This review provides readers with a comprehensive analysis of chemical recycling technologies for PVC waste and PVC-containing plastic waste to transform them into chemicals, fuels, feedstock, and value-added polymers.

Lignocellulose Conversion via Catalytic Transformations Yields Methoxyterephthalic Acid Directly from Sawdust

Poly(ethylene terephthalate) polyester represents the most common class of thermoplastic polymers widely used in the textile, bottling, and packaging industries. Terephthalic acid and ethylene glycol, both of petrochemical origin, are polymerized to yield the polyester. However, an earlier report suggests that polymerization of methoxyterephthalic acid with ethylene glycol provides a methoxy-polyester with similar properties. Currently, there are no established biobased synthetic routes toward the methoxyterephthalic acid monomer. Here, we show a viable route to the dicarboxylic acid from various tree species involving three catalytic steps. We demonstrate that sawdust can be converted to valuable aryl nitrile intermediates through hydrogenolysis, followed by an efficient fluorosulfation-catalytic cyanation sequence (>90%) and then converted to methoxyterephthalic acid by hydrolysis and oxidation. A preliminary polymerization result indicates a methoxy-polyester with acceptable thermal properties.

Potential impact of polyethylene microplastics on the growth of water spinach (Ipomoea aquatica F.): Endophyte and rhizosphere effects

Microplastic contamination has received much attention, especially in agroecosystems. However, since edible crops with different genetic backgrounds may present different responses to microplastics, more research should be conducted and focused on more edible crops. In the current study, pot experiments were conducted to investigate the potential impact of polyethylene microplastic (PE) (particle sizes: 0.5 μm and 1.0 μm, addition levels: 0 (control), 0.5% and 1.0% (w/w)) addition on the physiological and biochemical variations of I. aquatica F.. The results indicated that PE addition caused an increase in the soil pH and NH₄⁺-N and soil organic matter contents, which increased by 10.1%, 29.9% and 50.1% when PE addition at A10P0.5 level (10 g (PE) kg^-1 soil, particle size: 0.5 μm). While, PE exposure resulted in a decrease in soil available phosphorus and total phosphorus contents, which decreased by 53.9% and 10.5% when PE addition at A10P0.5 level. In addition, PE addition altered the soil enzyme activities. Two-way ANOVA indicated that particle size had a greater impact on the variations in soil properties and enzyme activities than the addition level. PE addition had a strong impact on the rhizosphere microbial and root endophyte community diversity and structure of I. aquatica F.. Two-way ANOVA results indicated that the particle size and addition level significantly altered the α-diversity indices of both rhizosphere microbial and root endophyte (P < 0.05, P < 0.01 or P < 0.001). Moreover, PE was adsorbed by I. aquatica F., which was clearly observed in the transverse roots and significantly increased the H₂O₂, ·O₂^-, malondialdehyde and ascorbic acid contents in both the roots and aerial parts of I. aquatica F., leading to a decrease in I. aquatica F. biomass. Overall, the current study enriches the understanding of the effect of microplastics on edible crops.

Approaches in Sustainable, Biobased Multilayer Packaging Solutions

The depletion of fossil resources and the growing demand for plastic waste reduction has put industries and academic researchers under pressure to develop increasingly sustainable packaging solutions that are both functional and circularly designed. In this review, we provide an overview of the fundamentals and recent advances in biobased packaging materials, including new materials and techniques for their modification as well as their end-of-life scenarios. We also discuss the composition and modification of biobased films and multilayer structures, with particular attention to readily available drop-in solutions, as well as coating techniques. Moreover, we discuss end-of-life factors, including sorting systems, detection methods, composting options, and recycling and upcycling possibilities. Finally, regulatory aspects are pointed out for each application scenario and end-of-life option. Moreover, we discuss the human factor in terms of consumer perception and acceptance of upcycling.

Fully Bio-based Poly(ketal-ester)s by Ring-opening Polymerization of a Bicylcic Lactone from Glycerol and Levulinic Acid

A fully renewable bio-based bicyclic lactone containing a five-membered cyclic ketal moiety, 7-methyl-3,8,10-trioxabicyclo[5.2.1]decan-4-one (TOD), was synthesized through a two-step acid-catalyzed process from glycerol and levulinic acid. The ring-opening polymerization (ROP) of TOD at 30°C with benzyl alcohol (BnOH) as the initiator and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) as the catalyst can afford high molar mass PTOD with a cis-2.4-disubstitued 2-methyl 1,3-dioxolane moiety in its repeating unit. PTOD is an amorphous polymer with a glass transition temperature (T_g ) of 13°C. It can be hydrolyzed into structurally defined small molecules under acidic or basic conditions by the selective cleavage of either the cyclic ketal or the ester linkage respectively. The TBD-catalyzed copolymerization of L-lactide (L-LA) and TOD at -20°C was investigated. It was confirmed that L-LA polymerized quickly with racemization to form PLA, followed by a slow incorporation of TOD into the formed PLA chains via transesterification. By varying the feed ratios of L-LA to TOD, a series of random copolymers (PLA-co-PTOD) with different TOD incorporation ratios and tunable T_g s were obtained. Under acidic conditions, PLA-co-PTOD degrades much faster than PLA via the selective cleavage of the cyclic ketal linkages. This work provides insights for the development of more sustainable and acid-accelerated degradable alternatives to aliphatic polyesters.

Leveraging substrate flexibility and product selectivity of acetogens in two-stage systems for chemical production

Carbon dioxide (CO2 ) stands out as sustainable feedstock for developing a circular carbon economy whose energy supply could be obtained by boosting the production of clean hydrogen from renewable electricity. H2 -dependent CO2 gas fermentation using acetogenic microorganisms offers a viable solution of increasingly demonstrated value. While gas fermentation advances to achieve commercial process scalability, which is currently limited to a few products such as acetate and ethanol, it is worth taking the best of the current state-of-the-art technology by its integration within innovative bioconversion schemes. This review presents multiple scenarios where gas fermentation by acetogens integrate into double-stage biotechnological production processes that use CO2 as sole carbon feedstock and H2 as energy carrier for products' synthesis. In the integration schemes here reviewed, the first stage can be biotic or abiotic while the second stage is biotic. When the first stage is biotic, acetogens act as a biological platform to generate chemical intermediates such as acetate, formate and ethanol that become substrates for a second fermentation stage. This approach holds the potential to enhance process titre/rate/yield metrics and products' spectrum. Alternatively, when the first stage is abiotic, the integrated two-stage scheme foresees, in the first stage, the catalytic transformation of CO2 into C1 products that, in the second stage, can be metabolized by acetogens. This latter scheme leverages the metabolic flexibility of acetogens in efficient utilization of the products of CO2 abiotic hydrogenation, namely formate and methanol, to synthesize multicarbon compounds but also to act as flexible catalysts for hydrogen storage or production.

Do biodegradable food packaging films from agro-food waste pay off? A cost-benefit analysis in the context of Europe

Bio-based polymers are increasingly attracting attention as a solution to reducing the consumption of non-renewable resources and curbing the accumulation of fossil-based plastic waste. In this study, we analyze the economics of a new packaging film based on a polylactic acid-polyhydroxybutyrate blend (PLA-PHB), with PHB obtained from agro-industrial residues (potato peels). We model various sizes of biorefineries using the new biotechnology in Europe. For a four-year payback period, which is generally accepted in the industry, the calculated minimum product selling price ranges from 9.7 euros per kilogram to 37.2 euros per kilogram, depending, among other factors, on the production capacity of the biorefinery. We have incorporated the uncertainty over the model parameters in a Monte Carlo simulation and investigated the relative impact of individual factors on the minimum product selling price. Overall, the results indicate that the bio-based feedstock availability is the most influential factor on the profitability of the new biotechnology.

Bio-Based Vitrimers from 2,5-Furandicarboxylic Acid as Repairable, Reusable, and Recyclable Epoxy Systems

In this work, a series of bio-based epoxy vitrimers were developed by reacting diglycidyl ether of bisphenol A (DGEBA) and bio-based 2,5-furandicarboxylic acid (FDCA) at different molar ratios. Triazabicyclodecene was used as a transesterification catalyst to promote thermally induced exchange reactions. Differential scanning calorimetry, gel content measurements, and Fourier transform infrared spectroscopy were used to study the FDCA-DGEBA crosslinking reaction. The transesterification exchange reaction kinetics of such crosslinked systems was characterized via stress relaxation tests, evidencing an Arrhenius-type dependence of the relaxation time on temperature, and an activation energy of the dynamic rearrangement depending on the molar composition. In addition, self-healing, thermoformability, and mechanical recycling were demonstrated for the composition showing the faster topology rearrangement, namely, the FDCA/DGEBA molar ratio equal to 0.6. This work provides the first example of bio-based epoxy vitrimers incorporating FDCA, making these systems of primary importance in the field of reversible, high-performance epoxy materials for future circular economy scenarios.

Sustainable cycloaliphatic polyurethanes: from synthesis to applications

Polyurethanes (PUs) are a versatile and major polymer family, mainly produced via polyaddition between polyols and polyisocyanates. A large variety of fossil-based building blocks is commonly used to develop a wide range of macromolecular architectures with specific properties. Due to environmental concerns, legislation, rarefaction of some petrol fractions and price fluctuation, sustainable feedstocks are attracting significant attention, e.g., plastic waste and biobased resources from biomass. Consequently, various sustainable building blocks are available to develop new renewable macromolecular architectures such as aromatics, linear aliphatics and cycloaliphatics. Meanwhile, the relationship between the chemical structures of these building blocks and properties of the final PUs can be determined. For instance, aromatic building blocks are remarkable to endow materials with rigidity, hydrophobicity, fire resistance, chemical and thermal stability, whereas acyclic aliphatics endow them with oxidation and UV light resistance, flexibility and transparency. Cycloaliphatics are very interesting as they combine most of the advantages of linear aliphatic and aromatic compounds. This original and unique review presents a comprehensive overview of the synthesis of sustainable cycloaliphatic PUs using various renewable products such as biobased terpenes, carbohydrates, fatty acids and cholesterol and/or plastic waste. Herein, we summarize the chemical modification of the main sustainable cycloaliphatic feedstocks, synthesis of PUs using these building blocks and their corresponding properties and subsequently present their major applications in hot-topic fields, including building, transportation, packaging and biomedicine.

Polystyrene microplastics induce autophagy and apoptosis in birds lungs via PTEN/PI3K/AKT/mTOR

Microplastics (MPs) seriously pollute and potentially threaten human health. Birds are sentinels of environmental pollutants, which respond quickly to contamination events and reveal current environmental exposure. Therefore, birds are good bioindicators for monitoring environmental pollutants. However, the mechanism of lung injury in birds and the role of the PTEN/PI3K/AKT axis are unknown. In this study, broilers treated with different polystyrene microplastics (PS-MPs) (0, 1, 10, and 100 mg/L) were exposed to drinking water for 6 weeks to analyze the effect of PS-MPs on lung injury of broilers. The results showed that with the increase of PS-MPs concentration, malonaldehyde (MDA) content increased, and catalase (CAT) and glutathione (GSH) activity decreased, further leading to oxidative stress. PS-MPs caused the PI3K/Akt/mTOR pathway to be inhibited by phosphorylation, and autophagy accelerated formation (LC3) and degradation (p62), causing autophagy. In PS-MPs exposed lung tissues, the expression of Bax/Bcl-2 and Caspase family increased, and MAPK signaling pathways (p38, ERK, and JNK) showed an increase in phosphorylation level, thus leading to cell apoptosis. Our research showed that PS-MPs could activate the antioxidant system. The antioxidant system unbalance-regulated Caspase family, and PTEN/PI3K/AKT pathways initiated apoptosis and autophagy, which in turn led to lung tissue damage in chickens. These results are of great significance to the toxicological study of PS-MPs and the protection of the ecosystem.

Comparison of the enzymatic depolymerization of polyethylene terephthalate and AkestraTM using Humicola insolens cutinase

The enzymatic depolymerization of synthetic polyesters has become of great interest in recycling plastics. Most of the research in this area focuses on the depolymerization of polyethylene terephthalate (PET) due to its widespread use in various applications. However, the enzymatic activity on other commercial polyesters is less frequently investigated. Therefore, AkestraTM attracted our attention, which is a copolymer derived from PET with a partially biobased spirocyclic acetal structure. In this study, the activity of Humicola insolens cutinase (HiCut) on PET and AkestraTM films and powder was investigated. HiCut showed higher depolymerization activity on amorphous PET films than on Akestra™ films. However, an outstanding performance was achieved on AkestraTM powder, reaching 38% depolymerization in 235h, while only 12% for PET powder. These results are consistent with the dependence of the enzymes on the crystallinity of the polymer since Akestra™ is amorphous while the PET powder has 14% crystallinity. On the other hand, HiCut docking studies and molecular dynamic simulations (MD) suggested that the PET-derived mono (hydroxyethyl)terephthalate dimer (MHET)2 is a hydrolyzable ligand, producing terephthalic acid (TPA), while the Akestra™-derived TPA-spiroglycol ester is not, which is consistent with the depolymerization products determined experimentally. MD studies also suggest ligand-induced local conformational changes in the active site.

Active Films Based on Starch and Wheat Gluten (Triticum vulgare) for Shelf-Life Extension of Carrots

The use of biodegradable biopolymers with the incorporation of active ingredients has been considered as an alternative to extend the useful life of food. Therefore, the objective of this research was to develop active films based on starch and wheat gluten, containing cinnamon and turmeric essential oils by using the solvent casting method. Different film formulations were made from wheat starch, gluten, glycerol, and essential oils of cinnamon and turmeric. The films were characterized according to their morphology, optical, thermal, antioxidant, and barrier properties. Subsequently, the active properties on baby carrots regarding weight loss, appearance, and fungal growth were evaluated. The results indicated that the starch-based films showed a slight decrease in moisture content with the addition of essential oils (up to 13.29%), but at the same time showed a significant reduction in water solubility (up to 28.4%). Gluten-based films did not present significant differences in these parameters, although the solubility in water tended to increase (up to 13.15%) with the addition of essential oils. In general, the films presented good thermal stability and antioxidant capacity, and in the carrot coating test, a decrease in weight loss of up to 44.44% and 43.33% was observed for the coatings based on starch and gluten with the addition of turmeric essential oil, respectively. Finally, films developed with cinnamon and turmeric essential oils are potential candidates for the design of biodegradable active packaging.

Critical Review on the Progress of Plastic Bioupcycling Technology as a Potential Solution for Sustainable Plastic Waste Management

Plastic production worldwide has doubled in the last two decades and is expected to reach a four-fold increase by 2050. The durability of plastic makes them a perfect material for many applications, but it is also a key limitation to their end-of-life management. The current plastic lifecycle is far from circular, with only 13% being collected for recycling and 9% being successfully recycled, indicating the failure of current recycling technology. The remaining plastic waste streams are thus incinerated, landfilled, or worse, mismanaged, leading to them leaking into the environment. To promote plastic circularity, keeping material in the loop is a priority and represents a more sustainable solution. This can be achieved through the reuse of plastic items, or by using plastic waste as a resource for new materials, instead of discarding them as waste. As the discovery of plastic-degrading/utilizing microorganisms and enzymes has been extensively reported recently, the possibility of developing biological plastic upcycling processes is opening up. An increasing amount of studies have investigated the use of plastic as a carbon source for biotechnological processes to produce high-value compounds such as bioplastics, biochemicals, and biosurfactants. In the current review, the advancements in fossil-based plastic bio- and thermochemical upcycling technologies are presented and critically discussed. In particular, we highlight the developed (bio)depolymerization coupled with bioconversion/fermentation processes to obtain industrially valuable products. This review is expected to contribute to the future development and scale-up of effective plastic bioupcycling processes that can act as a drive to increase waste removal from the environment and valorize post-consumer plastic streams, thus accelerating the implementation of a circular (plastic) economy.

Synthesis, characterization and biodegradation studies of polyurethanes: Effect of unsaturation on biodegradability

The presence of unsaturation in the main chain of the polymer promotes the biodegradation process. To elucidate this hypothesis, one unsaturated polyurethane (PUU) and another saturated polyurethane (PUS) were synthesized and then biodegraded, and evidence was found to support this hypothesis. The polyurethanes were synthesized by a polycondensation reaction with yields up to 97%. It is important to note that both polyurethanes were constituted only by the recalcitrant hard segment and showed low crystallinity and molecular weight. Spectroscopic, thermal, and chromatographic techniques were used for physical and structural characterization. Both polyurethanes were biodegraded by the BP8 microbial community and the Cladosporium tenuissimum A3.I.1 fungus during a two-month period. A postbiodegradation characterization revealed the detriment of properties in both materials, indicating successful biodegradation. As a general trend, more efficient biodegradation was observed by the Cladosporium tenuissimum fungus A3.I.1 than by the BP8 microbial community. Specifically, with the fungus, the infrared analysis showed a decrease in the characteristic bands as well as the appearance of new carboxylic acid signals (approximately 1701 cm^-1), suggesting the enzymatic cleavage of the urethane group. By comparison to polyurethanes, PUU showed superior biodegradation; using the fungus, a 51% decrease in molecular weight (M_w) for PUU was achieved, in contrast with 36% achieved for PUS. Despite the low crystallinity and molecular weight, the determining factor in biodegradation was the presence of unsaturations along the main chain. Thus, a more efficient oxidative attack is carried out by microorganisms on double bonds. The novel PUU showed similar biodegradation to the known polyester-type PU with highly hydrolysable groups. Consequently, PUU represents a green alternative to conventional polyurethanes and is a key material to achieve biorecycling.

A facile process for adipic acid production in high yield by oxidation of 1,6-hexanediol using the resting cells of Gluconobacter oxydans

Background

Adipic acid (AA) is one of the most important industrial chemicals used mainly for the production of Nylon 6,6 but also for making polyurethanes, plasticizers, and unsaturated polyester resins, and more recently as a component in the biodegradable polyester poly(butylene adipate terephthalate) (PBAT). The main route for AA production utilizes benzene as feedstock and generates copious amounts of the greenhouse gas NO₂. Hence, alternative clean production routes for AA from renewable bio-based feedstock are drawing increasing attention. We have earlier reported the potential of Gluconobacter oxydans cells to oxidize 1,6-hexanediol, a potentially biobased diol to AA.

Results

The present report involves a study on the effect of different parameters on the microbial transformation of 1,6-hexanediol to adipic acid, and subsequently testing the process on a larger lab scale for achieving maximal conversion and yield. Comparison of three wild-type strains of G. oxydans DSM50049, DSM2003, and DSM2343 for the whole-cell biotransformation of 10 g/L 1,6-hexanediol to adipic acid in batch mode at pH 7 and 30 °C led to the selection of G. oxydans DSM50049, which showed 100% conversion of the substrate with over 99% yield of adipic acid in 30 h. An increase in the concentrations of the substrate decreased the degree of conversion, while the product up to 25 g/L in batch and 40 g/L in fed-batch showed no inhibition on the conversion. Moreover, controlling the pH of the reaction at 5–5.5 was required for the cascade oxidation reactions to work. Cell recycling for the biotransformation resulted in a significant decrease in activity during the third cycle. Meanwhile, the fed-batch mode of transformation by intermittent addition of 1,6-hexanediol (30 g in total) in 1 L scale resulted in complete conversion with over 99% yield of adipic acid (approximately 37 g/L). The product was recovered in a pure form using downstream steps without the use of any solvent.

Conclusion

A facile, efficient microbial process for oxidation of 1,6-hexanediol to adipic acid, having potential for scale up was demonstrated. The entire process is performed in aqueous medium at ambient temperatures with minimal greenhouse gas emissions. The enzymes involved in catalyzing the oxidation steps are currently being identified.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01947-6.

Novel Approach in Biodegradation of Synthetic Thermoplastic Polymers: An Overview

Biodegradation is necessary for water-soluble or water-immiscible polymers because they eventually enter streams which can neither be recycled nor incinerated. It is important to consider the microbial degradation of natural and synthetic polymers in order to understand what is necessary for biodegradation and the mechanisms involved. Low/high-density polyethylene is a vital cause of environmental pollution. It occurs by choking the sewer line through mishandling, thus posing an everlasting ecological threat. Environmental pollution due to the unscrupulous consumption of synthetic polymers derived from petroleum has an adverse impact on the environment since the majority of plastics do not degrade, and the further incineration of synthetic plastics generates CO2 and dioxin. This requires understanding the interactions between materials and microorganisms and the biochemical changes involved. Widespread studies on the biodegradation of plastics have been carried out in order to overcome the environmental problems associated with synthetic plastic waste. Awareness of the waste problem and its impact on the environment has awakened new interest in the area of degradable polymers through microbes viz., bacteria, fungi, and actinomycetes. The microbial degradation of plastics is caused by certain enzymatic activities that lead to a chain cleavage of polymers into oligomers and monomers. This review focuses on the biodegradation rate of plastics by fungal and bacterial communities and the mode of action of biodegradation.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Thermal Stability of Polycaprolactone Grafted Densely with Maleic Anhydride Analysed Using the Coats-Redfern Equation

The plastic waste problem has recently attracted unprecedented attention globally. To reduce the adverse eff ects on environments, biodegradable polymers have been studied to solve the problems. Poly(ε-caprolactone) (PCL) is one of the common biodegradable plastics used on its own or blended with natural polymers because of its excellent properties after blending. However, PCL and natural polymers are difficult to blend due to the polymers' properties. Grafted polymerization of maleic anhydride and dibenzoyl peroxide (DBPO) with PCL is one of the improvements used for blending immiscible polymers. In this study, we first focused on the effects of three factors (stirring time, maleic anhydride (MA) amount and benzoyl peroxide amount) on the grafting ratio with a maximum value of 4.16% when applying 3.000 g MA and 1.120 g DBPO to 3.375 g PCL with a stirring time of 18 h. After that, the grafting condition was studied based on the kinetic thermal decomposition and activation energy by the Coats-Redfern method. The optimal fitting model was confirmed by the determination coefficient of nearly 1 to explain the contracting volume mechanism of synthesized PCL-g-MA. Consequently, grafted MA hydrophilically augmented PCL as the reduced contact angle of water suggests, facilitating the creation of a plastic-biomaterial composite.

Fully lignocellulose-based PET analogues for the circular economy

Polyethylene terephthalate is one of the most abundantly used polymers, but also a significant pollutant in oceans. Due to growing environmental concerns, polyethylene terephthalate alternatives are highly sought after. Here we present readily recyclable polyethylene terephthalate analogues, made entirely from woody biomass. Central to the concept is a two-step noble metal free catalytic sequence (Cu20-PMO catalyzed reductive catalytic fractionation and Raney Ni mediated catalytic funneling) that allows for obtaining a single aliphatic diol 4-(3-hydroxypropyl) cyclohexan-1-ol in high isolated yield (11.7 wt% on lignin basis), as well as other product streams that are converted to fuels, achieving a total carbon yield of 29.5%. The diol 4-(3-hydroxypropyl) cyclohexan-1-ol is co-polymerized with methyl esters of terephthalic acid and furan dicarboxylic acid, both of which can be derived from the cellulose residues, to obtain polyesters with competitive Mw and thermal properties (Tg of 70-90 °C). The polymers show excellent chemical recyclability in methanol and are thus promising candidates for the circular economy.

Aqueous zinc batteries: Design principles toward organic cathodes for grid applications

The development of low-cost and sustainable grid energy storage is urgently needed to accommodate the growing proportion of intermittent renewables in the global energy mix. Aqueous zinc-ion batteries are promising candidates to provide grid storage due to their inherent safety, scalability, and economic viability. Organic cathode materials are especially advantageous for use in zinc-ion batteries as they can be synthesized using scalable processes from inexpensive starting materials and have potential for biodegradation at their end of life. Strategies for designing organic cathode materials for rechargeable zinc-ion batteries targeting grid applications will be discussed in detail. Specifically, we emphasize the importance of cost analysis, synthetic simplicity, end-of-life scenarios, areal loading of active material, and long-term stability to materials design. We highlight the strengths and challenges of present zinc-organic research in the context of our design principles, and provide opportunities and considerations for future electrode design.

Influence of Multiple Thermomechanical Processing of 3D Filaments Based on Polylactic Acid and Polyhydroxybutyrate on Their Rheological and Utility Properties

This study focused on material recycling of a biodegradable blend based on PLA and PHB for multiple applications of biodegradable polymeric material under real conditions. In this study, we investigated the effect of multiple processing of a biodegradable polymer blend under the trade name NONOILEN^®, which was processed under laboratory as well as industrial conditions. In this article, we report on testing the effect of blending and multiple processing on thermomechanical stability, molecular characteristics, as well as thermophysical and mechanical properties of experimental- and industrial-type tested material suitable for FDM 3D technology. The results showed that the studied material degraded during blending and subsequently during multiple processing. Even after partial degradation, which was demonstrated by a decrease in average molecular weight and a decrease in complex viscosity in the process of multiple reprocessing, there was no significant change in the material’s thermophysical properties, either in laboratory or industrial conditions. There was also no negative impact on the strength characteristics of multiple processed samples. The results of this work show that a biodegradable polymer blend based on PLA and PHB is a suitable candidate for material recycling even in industrial processing conditions. In addition, the results suggest that the biodegradable polymeric material NONOILEN^® 3D 3056-2 is suitable for multiple uses in FDM technology.

Green Chemistry, Biocatalysis, and the Chemical Industry of the Future

In the movement to decarbonize our economy and move away from fossil fuels we will need to harness the waste products of our activities, such as waste lignocellulose, methane, and carbon dioxide. Our wastes need to be integrated into a circular economy where used products are recycled into a manufacturing carbon cycle. Key to this will be the recycling of plastics at the resin and monomer levels. Biotechnology is well suited to a future chemical industry that must adapt to widely distributed and diverse biological chemical feedstocks. Our increasing mastery of biotechnology is allowing us to develop enzymes and organisms that can synthesize a widening selection of desirable bulk chemicals, including plastics, at commercially viable productivities. Integration of bioreactors with electrochemical systems will permit new production opportunities with enhanced productivities and the advantage of using a low-carbon electricity from renewable and sustainable sources.

Modelling Mixed Microbial Culture Polyhydroxyalkanoate Accumulation Bioprocess towards Novel Methods for Polymer Production Using Dilute Volatile Fatty Acid Rich Feedstocks

Volatile fatty acid (VFA) rich streams from fermentation of organic residuals and wastewater are suitable feedstocks for mixed microbial culture (MMC) Polyhydroxyalkanoate (PHA) production. However, many such streams have low total VFA concentration (1–10 gCOD/L). PHA accumulation requires a flow-through bioprocess if the VFAs are not concentrated. A flow through bioprocess must balance goals of productivity (highest possible influent flow rates) with goals of substrate utilization efficiency (lowest possible effluent VFA concentration). Towards these goals, dynamics of upshift and downshift respiration kinetics for laboratory and pilot scale MMCs were evaluated. Monod kinetics described a hysteresis between the upshift and downshift responses. Substrate concentrations necessary to stimulate a given substrate uptake rate were significantly higher than the concentrations necessary to sustain the attained substrate uptake rate. A benefit of this hysteresis was explored in Monte Carlo based PHA accumulation bioprocess numerical simulations. Simulations illustrated for a potential to establish continuous flow-through PHA production bioprocesses even at a low (1 gCOD/L) influent total VFA concentration. Process biomass recirculation into an engineered higher substrate concentration mixing zone, due to the constant influent substrate flow, enabled to drive the process to maximal possible PHA production rates without sacrificing substrate utilization efficiency.

Towards a Circular Economy of Plastics: An Evaluation of the Systematic Transition to a New Generation of Bioplastics

Plastics have become an essential part of the modern world thanks to their appealing physical and chemical properties as well as their low production cost. The most common type of polymers used for plastic account for 90% of the total production and are made from petroleum-based nonrenewable resources. Concerns over the sustainability of the current production model and the environmental implications of traditional plastics have fueled the demand for greener formulations and alternatives. In the last decade, new plastics manufactured from renewable sources and biological processes have emerged from research and have been established as a commercially viable solution with less adverse effects. Nevertheless, economic and legislative challenges for biobased plastics hinder their widespread implementation. This review summarizes the history of plastics over the last century, including the most relevant bioplastics and production methods, the environmental impact and mitigation of the adverse effects of conventional and emerging plastics, and the regulatory landscape that renewable and recyclable bioplastics face to reach a sustainable future.

A Review on Biological Synthesis of the Biodegradable Polymers Polyhydroxyalkanoates and the Development of Multiple Applications

Polyhydroxyalkanoates, or PHAs, belong to a class of biopolyesters where the biodegradable PHA polymer is accumulated by microorganisms as intracellular granules known as carbonosomes. Microorganisms can accumulate PHA using a wide variety of substrates under specific inorganic nutrient limiting conditions, with many of the carbon-containing substrates coming from waste or low-value sources. PHAs are universally thermoplastic, with PHB and PHB copolymers having similar characteristics to conventional fossil-based polymers such as polypropylene. PHA properties are dependent on the composition of its monomers, meaning PHAs can have a diverse range of properties and, thus, functionalities within this biopolyester family. This diversity in functionality results in a wide array of applications in sectors such as food-packaging and biomedical industries. In order for PHAs to compete with the conventional plastic industry in terms of applications and economics, the scale of PHA production needs to grow from its current low base. Similar to all new polymers, PHAs need continuous technological developments in their production and material science developments to grow their market opportunities. The setup of end-of-life management (biodegradability, recyclability) system infrastructure is also critical to ensure that PHA and other biobased biodegradable polymers can be marketed with maximum benefits to society. The biobased nature and the biodegradability of PHAs mean they can be a key polymer in the materials sector of the future. The worldwide scale of plastic waste pollution demands a reformation of the current polymer industry, or humankind will face the consequences of having plastic in every step of the food chain and beyond. This review will discuss the aforementioned points in more detail, hoping to provide information that sheds light on how PHAs can be polymers of the future.

Towards the Sustainability of the Plastic Industry through Biopolymers: Properties and Potential Applications to the Textiles World

This study aims to provide an overview of the latest research studies on the use of biopolymers in various textile processes, from spinning processes to dyeing and finishing treatment, proposed as a possible solution to reduce the environmental impact of the textile industry. Recently, awareness of various polluting aspects of textile production, based on petroleum derivatives, has grown significantly. Environmental issues resulting from greenhouse gas emissions, and waste accumulation in nature and landfills, have pushed research activities toward more sustainable, low-impact alternatives. Polymers derived from renewable resources and/or with biodegradable characteristics were investigated as follows: (i) as constituent materials in yarn production, in view of their superior ability to be decomposed compared with common synthetic petroleum-derived plastics, positive antibacterial activities, good breathability, and mechanical properties; (ii) in textile finishing to act as biological catalysts; (iii) to impart specific functional properties to treated textiles; (iv) in 3D printing technologies on fabric surfaces to replace traditionally more pollutive dye-based and inkjet printing; and (v) in the implants for the treatment of dye-contaminated water. Finally, current projects led by well-known companies on the development of new materials for the textile market are presented.

Contribution of Fermentation Technology to Building Blocks for Renewable Plastics

Large-scale worldwide production of plastics requires the use of large quantities of fossil fuels, leading to a negative impact on the environment. If the production of plastic continues to increase at the current rate, the industry will account for one fifth of global oil use by 2050. Bioplastics currently represent less than one percent of total plastic produced, but they are expected to increase in the coming years, due to rising demand. The usage of bioplastics would allow the dependence on fossil fuels to be reduced and could represent an opportunity to add some interesting functionalities to the materials. Moreover, the plastics derived from bio-based resources are more carbon-neutral and their manufacture generates a lower amount of greenhouse gasses. The substitution of conventional plastic with renewable plastic will therefore promote a more sustainable economy, society, and environment. Consequently, more and more studies have been focusing on the production of interesting bio-based building blocks for bioplastics. However, a coherent review of the contribution of fermentation technology to a more sustainable plastic production is yet to be carried out. Here, we present the recent advancement in bioplastic production and describe the possible integration of bio-based monomers as renewable precursors. Representative examples of both published and commercial fermentation processes are discussed.

Environmental management of industrial decarbonization with focus on chemical sectors: A review

A considerable portion of fossil CO₂ emissions comes from the energy sector for production of heat and electricity. The industrial sector has the second order in emission in which the main parts are released from energy-intensive industries, namely metallurgy, building materials, chemicals, and manufacturing. The decarbonization of industrial wastes contemplates the classic decarbonization through optimization of conventional processes as well as utilization of renewable energy and resources. The upgrading of existing processes and integration of the methodologies with a focus on efficiency improvement and reduction of energy consumption and the environment is the main focus of this review. The implementation of renewable energy and feedstocks, green electrification, energy conversion methodologies, carbon capture, and utilization, and storage are also covered. The main objectives of this review are towards chemical industries by introducing the potential technology enhancement at different subsectors. For this purpose, state-of-the-art roadmaps and pathways from the literature findings are presented. Both common and innovative renewable attempts are needed to reach out both short- and long-term deep decarbonization targets. Even though all of the innovative solutions are not economically viable at the industrial scale, they play a crucial role during and after the energy transition interval.

Melt polycondensation of 2,5-tetrahydrofurandimethanol with various dicarboxylic acids towards a variety of biobased polyesters

The effects of THFDM's structure on its reactivity, polymer molecular chain energy and properties were systematically studied.

Microplastics pollution and risk assessment in water bodies of two nature reserves in Jilin Province: Correlation analysis with the degree of human activity

As a new type of environmental pollutant, microplastics (MPs) are widely present in freshwater systems. The ecological risks of MPs pollution in nature reserves and the correlation between human activities and the abundance of MPs are still unclear. This is the first survey of MPs in freshwater systems in Northeast China. The content and composition of MPs in 19 water samples were investigated in Chagan lake and Xianghai. The abundance of MPs samples in Chagan Lake averages 3.61 ± 2.23 particles/L, and in Xianghai averages 0.29 ± 0.11 particles/L. The main types of MPs in Chagan Lake are PA (23.7%) and PS (53.2%); while in Xianghai are PP (56%) and PS (32.7%). Foam, white and <1 mm are the main shapes, colors and sizes of Chagan Lake MPs, while of Xianghai are film, transparent and <1 mm. This may be related to the well-developed tourism and fishing industry (foam and fishing line) in Chagan Lake and aquaculture in Xianghai (foam and plastic film). The hazard index (HI) indicated a Hazard Level III for MPs pollution in Chagan Lake and Xianghai. Pollution load index (PLI) and potential ecological risk index (RI) indicate that the pollution risk of MPs polymers in the two places is relatively small. The degree of human activity is quantified to analyze the correlation of MPs abundance. The quantified scores are positively correlated with the abundance of MPs at different sampling points (Chagan lake: P < 0.05, 95% Cl; Xianghai: P < 0.05, 95% Cl).

Azelaic Acid: A Bio-Based Building Block for Biodegradable Polymers

Azelaic acid is a dicarboxylic acid containing nine C atoms, industrially obtained from oleic acid. Besides its important properties and pharmacological applications, as an individual compound, azelaic acid has proved to be a valuable bio-based monomer for the synthesis of biodegradable and sustainable polymers, plasticizers and lubricants. This review discusses the studies and the state of the art in the field of the production of azelaic acid from oleic acid, the chemical and enzymatic synthesis of bio-based oligo and polyester and their properties, including biodegradability and biocompostability.

Assessing the Economic Viability of the Plastic Biorefinery Concept and Its Contribution to a More Circular Plastic Sector

It is widely accepted that plastic waste is one of the most urgent environmental concerns the world is currently facing. The emergence of bio-based plastics provides an opportunity to reduce dependency on fossil fuels and transition to a more circular plastics economy. For polyethylene terephthalate (PET), one of the most prevalent plastics in packaging and textiles, two bio-based alternatives exist that are similar or superior in terms of material properties and recyclability. These are polyethylene furanoate (PEF) and polytrimethylene terephthalate (PTT). The overarching aim of this study was to examine the transition from fossil-based to renewable plastics, through the lens of PET upcycling into PEF and PTT. The process for the production of PEF and PTT from three waste feed streams was developed in the SuperPro Designer software and the economic viability assessed via a discounted cumulative cash flow (DCCF) analysis. A techno-economic analysis of the designed process revealed that the minimum selling price (MSP) of second generation-derived PEF and PTT is 3.13 USD/kg, and that utilities and the feedstock used for the production of 2,5-furandicarboxylic acid (FDCA) needed in PEF synthesis contributed the most to the process operating costs. The effect of recycling PEF and PTT through the process at three recycling rates (42%, 50% and 55%) was investigated and it was revealed that increased recycling could reduce the MSP of the 2G bio-plastics (by 48.5%) to 1.61 USD/kg. This demonstrates that the plastic biorefinery, together with increasing recycling rates, would have a beneficial effect on the economic viability of upcycled plastics.