Microencapsulation of active ingredients in functional foods: From research stage to commercial food products

New perspective on protein-based microcapsules as delivery vehicles for sensitive substances: A review

Sensitive substances have attracted wide attention due to their rich functional activities, such as antibiosis activities, antioxidant activities and prevent disease, etc. However, the low stability of sensitive substances limits their bioavailability and functional activities. Protein-based microcapsules can encapsulate sensitive substances to improve their adverse properties due to their good stability, strong emulsifying ability and wide source. Therefore, it is necessary to fully elaborate and summarize protein-based microcapsules to maximize their potential benefits in nutritional interventions. The focus of this review is to highlight the classification of protein-based microcapsules. In addition, the principles, advantages and disadvantages of preparation methods for protein-based microcapsules are summarized. Some novel preparation methods for protein-based microcapsules are also emphasized. Moreover, the mechanism of protein-based microcapsules that release sensitive substances in vitro is elucidated and summarized. Furthermore, the applications of protein-based microcapsules are outlined. Protein-based microcapsules can effectively encapsulate sensitive substances, which improve their bioavailability, and provide protective effects during storage and gastrointestinal digestion. In addition, microcapsules can improve the sensory quality of food and enhance its stability. The performance of protein-based microcapsules for delivering sensitive substances is influenced by factors such as protein type, the ratio between protein ratio and the other wall material, the preparation process, etc. Future research should focus on the new composite protein-based microcapsule delivery system, which can be applied to in vivo research and have synergistic effects and precise nutritional functions. In summary, protein-based microcapsules have broader research prospects in the functional foods and nutrition field.

Microfluidic fabrication of core-shell fucoxanthin nanofibers with improved environmental stability for reducing lipid accumulation in vitro

Fucoxanthin is a xanthophyll carotenoid that possesses potent antioxidant, anti-obesity, and anti-tumor properties. However, its limited solubility in water and susceptibility to degradation create challenges for its application. In this study, a microfluidic coaxial electrospinning technique was used to produce core-shell zein-gelatin nanofibers for encapsulating fucoxanthin, enhancing its bioavailability, and improving its stability. In comparison to uniaxially-loaded fucoxanthin nanofibers, the encapsulation efficiency of fucoxanthin reached 98.58 % at a core-shell flow rate ratio of 0.26:1, representing a 14.29 % improvement. The photostability of the nanofibers increased by 74.59 % after three days, UV stability increased by 38.82 % after 2 h, and temperature stability also significantly improved, demonstrating a protective effect under harsh environmental conditions (P < 0.05). Additionally, nanofibers effectively alleviated oleic acid-induced reactive oxygen species production and reduced fluorescence intensity by 54.76 %. MTT experiments indicated great biocompatibility of the nanofibers, effectively mitigating mitochondrial membrane potential polarization and lipid accumulation in HepG2 cells. Overall, the microfluidic coaxial electrospinning technique enables promising applications of fucoxanthin delivery in the food industry.

Study of molecular interaction and texture characteristics of hydrocolloid-mixed alginate microspheres: As a shell to encapsulate multiphase oil cores

This work investigates the molecular interaction of hydrocolloids (xanthan gum (XG), hydroxyethyl cellulose (HEC), carbomer (CBM) and hymagic™-4D (HA)) with sodium alginate (SA) in microspheres in detail. The molecular interaction of hydrocolloids with SA are demonstrated by the rheological property analysis of the mixed solutions as well as the morphology structure and texture characteristics studies of the microspheres. It is found that the hydrocolloids (XG, HEC and CBM) with branches or capable to coil are able to form complex networks with SA through molecular interactions which hinders the free diffusion of calcium ions and changes the texture characteristics of microspheres. In addition, the mixed solutions (SA-XG and SA-HEC) with complex networks and do not have a chelating effect on calcium ions are used to form the shell of the microcapsules through droplet microfluidic technology, and stable with soft microcapsules encapsulating multiphase oil cores have been successfully prepared. At the same time, the textural properties of microcapsules are quantized, which are related to human sensory properties. The developed stable and soft microcapsules which have the properties of sensory comfort are expected to be applied in the personal care industry and a variety of fields.

Investigating the Therapeutic Potential of Plants and Plant-Based Medicines: Relevance to Antioxidant and Neuroprotective Effects

Oxidative stress is a common characteristic of psychiatric, neurological, and neurodegenerative disorders. Therefore, compounds that are neuroprotective and reduce oxidative stress may be of interest as novel therapeutics. Phenolic, flavonoid and anthocyanin content, ORAC and DPPH free radical scavenging, and Cu2+ and Fe2+ chelating capacities were examined in variations (fresh/capsule) of Queen Garnet plum (QGP, Prunus salicina), black pepper (Piper nigrum) clove (Syzygium aromaticum), elderberry (Sambucus nigra), lemon balm (Melissa officinalis) and sage (Salvia officinalis), plus two blends (Astralagus membranaceus-lemon balm-rich, WC and R8). The ability of samples to prevent and treat H2O2-induced oxidative stress in SH-SY5Y cells was investigated. Pre-treatment with WC, elderberry, QGP, and clove prevented the oxidative stress-induced reduction in cell viability, demonstrating a neuroprotective effect. Elderberry increased cell viability following oxidative stress induction, demonstrating treatment effects. Clove had the highest phenolic and flavonoid content, DPPH, and Cu2+ chelating capacities, whereas QGP and elderberry were highest in anthocyanins. Black pepper had the highest ORAC and Fe2+ chelating capacity. These findings demonstrate that plant extracts can prevent and treat oxidative stress-induced apoptosis of neuron-like cells in vitro. Further research into phytochemicals as novel therapeutics for oxidative stress in the brain is needed.

Specific surface modification of liposomes for gut targeting of food bioactive agents

Liposomes have become a research hotspot in recent years as food delivery systems with attractive properties, including the bilayer structure assembled like the cell membrane, reducing the side-effect and improving environmental stability of cargos, controlling release, extending duration of functional ingredients, and high biodegradable and biocompatible abilities in the body. However, the conventional liposomes lack stability during storage and are weak in targeted absorption in the gastrointestinal track. At present, surface modification has been approved to be an effective platform to shield these barricades and help liposomes deliver the agents safely and effectively to the ideal site. In this review, the gastrointestinal stability of conventional liposomes, cargo release models from liposomes, and the biological fate of the core materials after release were emphasized. Then, the strategies in both physical and chemical perspectives to improve the stability and utilization of liposomes in the gastrointestinal tract, and the emerging approaches for improving gut targeting by specifically modified liposomes and the intestinal receptors relative to liposomes/cargos absorption were highlighted. Last but not the least, the safety, challenges, and opportunities for the improvement of liposomal bioavailability were also discussed to inspire new applications of liposomes as oral carriers.

Development of a microencapsulated probiotic delivery system with whey, xanthan, and pectin

Pediococcus pentosaceus is a lactic acid bacterium that has probiotic potential proven by studies. However, its viability can be affected by adverse conditions such as storage, heat stress, and even gastrointestinal passage. Thus, the aim of the present study was to microencapsulate and characterize microcapsules obtained by spray drying and produced only with whey powder (W) or whey powder combined with pectin (WP) or xanthan (WX) in the protection of P. pentosaceus P107. In the storage test at temperatures of - 20 °C and 4 °C, the most viable microcapsule was WP (whey powder and pectin), although WX (whey powder and xanthan) presented better stability at 25 °C. In addition, WX did not show stability to ensure probiotic potential (< 6 Log CFU mL-1) for 110 days and the microcapsule W (whey powder) maintained probiotic viability at the three temperatures (- 20 °C, 4 °C, and 25 °C) for 180 days. In the exposition to simulated gastrointestinal juice, the WX microcapsule showed the best results in all tested conditions, presenting high cellular viability. For the thermal resistance test, WP microcapsule was shown to be efficient in the protection of P. pentosaceus P107 cells. The Fourier transform infrared spectroscopy (FTIR) results showed that there was no chemical interaction between microcapsules of whey powder combined with xanthan or pectin. The three microcapsules produced were able to protect the cell viability of the microorganism, as well as the drying parameters were adequate for the microcapsules produced in this study.

Complex coacervation and freeze drying using whey protein concentrate, soy protein isolate and arabic gum to improve the oxidative stability of chia oil

BACKGROUND

Chia oil (CO) is popular for being the richest vegetable source of α-linolenic acid (60-66%). However, this content of polyunsaturated fatty acids (PUFA) limits the incorporation of bulk CO in food products due to its high probability of oxidation. This justifies the study of alternative wall materials for microencapsulation. No reports regarding the use of dairy protein/vegetable protein/polysaccharide blends as wall material for the microencapsulation of CO have been published. Therefore, this work analyzed the behavior of a whey protein concentrate (WPC)/soy protein isolate (SPI)/arabic gum (AG) blend as wall material. The complex coacervation (CC) process was studied: pH, 4.0; total solid content, 30% w/v; WPC/SPI/AG ratio, 8:1:1 w/w/w; stirring speed, 600 rpm; time, 30 min; room temperature.

RESULTS

The oxidative stability index (OSI) of CO (3.25 ± 0.16 h) was significantly increased after microencapsulation (around four times higher). Furthermore, the well-known matrix-forming ability of AG and WPC helped increase the OSI of microencapsulated oils. Meanwhile, SPI contributed to the increase of the encapsulation efficiency due to its high viscosity. Enhanced properties were observed with CC: encapsulation efficiency (up to 79.88%), OSIs (from 11.25 to 12.52 h) and thermal stability of microcapsules given by the denaturation peak temperatures of WPC (from 77.12 to 86.00 °C). No significant differences were observed in the fatty acid composition of bulk and microencapsulated oils.

CONCLUSION

Microcapsules developed from complex coacervates based on the ternary blend represent promising omega-3-rich carriers for being incorporated into functional foods.

Agro-Food Waste as an Ingredient in Functional Beverage Processing: Sources, Functionality, Market and Regulation

Waste generated from the agro-food industry represents a concerning environmental, social and economic issue. The Food and Agriculture Organization of the United Nations defines food waste as all food that decreases in quantity or quality to the extent that it is thrown out by food service providers and consumers. The FAO reports that 17% of worldwide food production may be wasted. Food waste may include fresh products, food close to the expiration date discarded by retailers and food products from household kitchens and eating establishments. However, food waste offers different possibilities to extract functional ingredients from different sources, such as dairy, cereals, fruits, vegetables, fibers, oils, dye and bioactive compounds. The optimization of agro-food waste as an ingredient will help in the development and innovation of food products to generate functional food and beverages to prevent and treat several diseases in consumers.

Microencapsulation of Brazilian Cherokee blackberry extract by freeze-drying using maltodextrin, gum Arabic, and pectin as carrier materials

There are many blackberry cultivars in Brazil; however, the characteristics and applications of the Cherokee cultivar have not yet been widely studied. For this reason, this research investigated the behaviour of maltodextrin (MD), gum Arabic (GA), and pectin (PEC), as carriers combined in different proportions (20% MD, 15% MD  +  5% GA, 15% MD  +  5% PEC), on encapsulation of Cherokee blackberry pulp extract obtained by freeze-drying. The results of moisture content (2.73-3.36%), water activity (a_w) (0.11-0.15), solubility (52.40-54.11%), hygroscopicity (17.59-21.11%), colour (hue 0.24-0.32), retention of anthocyanins (51.55-60.53%), total phenolic compounds (39.72-70.73 mg GAE/100g), antioxidant activity at 25 mg/mL (77.89-80.02%), IC₅₀ (12.26-14.53), simulated in vitro digestion and morphology were discussed. Concerning morphology, blackberry powders had irregular structures and amorphous structures. Comparatively, the best results were obtained for MD-GA. MD-GA presented the highest content of phenolic compounds (70.73  ±  1.84 mg GAE/100g) and antioxidant activity (80.02%), as well as the lowest IC₅₀ value (12.26). In general, all powders showed an increase in phenolic compounds during in vitro digestion, because of the pH conditions and digestive enzymes present in the simulated digestive fluid. This result shows that the wall material provides protection, since the blackberry rich extract (RE) showed degradation of phenolic compounds in in vitro digestion. In this sense, freeze-drying is a suitable technique for the encapsulation of Cherokee blackberry pulp extract.

Novel strategies for extraction, purification, processing, and stability improvement of bioactive molecules

Bioactive molecules gain significance in pharmaceutical and nutraceutical industries for showcasing various beneficial biological properties including but not limited to anticancer, antimicrobial, antioxidant, antifungal, anti-inflammatory, cardioprotective, neuroprotective, and antidiabetic. However, the practice of using traditional approaches to produce bioactive molecules is gradually declining due to various limitations such as low product quality, high toxicity, low product yield, low efficiency, and product degradation. Thus, with the escalating demand for these bioactive molecules and active agents in food and other food-related industries, it has become a dire need for the scientific world to come up with novel approaches and strategies that cannot just improve the quality of these bioactives but also prepare them in a comparatively shorter time span. This review includes the latest approaches and techniques used either independently or in combinations for the extraction, purification, processing, and stability improvement of general bioactive molecules. Different parameters of these versatile techniques have been discussed with their effectiveness and work principles.

The Effect of Decreased Ca++/Mg++ ATPase Activity on Lactobacillus delbrueckii subsp. bulgaricus sp1.1 Survival during Spray Drying

Compared with the commonly used technique of freeze-drying, spray drying has lower energy costs. However, spray drying also has a fatal disadvantage: a lower survival rate. In this study, the survival of bacteria in a spray-drying tower decreased as the water content was reduced. The water content of 21.10% was the critical point for spray drying Lactobacillus delbrueckii subsp. bulgaricus (L. bulgaricus) sp1.1 based on sampling in the tower. Based on the relationship between the moisture content of spray drying and the survival rate, the water content of 21.10% was also the critical point for the change in the survival rate during spray drying. Proteomic analysis was used to investigate the reasons for L. bulgaricus sp1.1 inactivation during and after spray drying. Gene Ontology (GO) enrichment revealed that differentially expressed proteins were mainly associated with the cell membrane and transport. In particular, proteins related to metal ion transport included those involved in the transport of potassium, calcium and magnesium ions. The protein-protein interaction (PPI) network revealed that Ca⁺⁺/Mg⁺⁺ adenosine triphosphatase (ATPase) may be a key protein. Ca⁺⁺/Mg⁺⁺ ATPase activity decreased substantially during spray drying (p < 0.05). Supplementation with Ca⁺⁺ and Mg⁺⁺ significantly increased the expression of ATPase-related genes and enzyme activity (p < 0.05). The Ca⁺⁺/Mg⁺⁺ ATPase activity of L. bulgaricus sp1.1 was enhanced by increasing the intracellular Ca⁺⁺ or Mg⁺⁺ concentration, thus increasing the survival of spray-dried LAB. Bacterial survival rates were increased to 43.06% with the addition of Ca⁺⁺ and to 42.64% with the addition of Mg⁺⁺, respectively. Ca⁺⁺/Mg⁺⁺ ATPase may be the key to the damage observed in spray-dried bacteria. Furthermore, the addition of Ca⁺⁺ or Mg⁺⁺ also reduced bacterial injury during spray drying by enhancing the activity of Ca⁺⁺/Mg⁺⁺ ATPase.

Preparation and characterization of astaxanthin-loaded microcapsules and its application in effervescent tablets

BACKGROUND

Astaxanthin is a type of keto-carotene with potential health benefits. However, astaxanthin has poor solubility and stability, resulting in its low oral bio-availability. Microcapsules can be used to improve the water solubility, stability and oral bio-availability of lipophilic bioactive compounds. Effervescent tablets can further improve the stability, smell and taste of microcapsules, and are more easily accepted by consumers.

RESULTS

Astaxanthin-loaded microcapsules were prepared by layer-by-layer assembly and freeze-drying technologies. Sodium caseinate and κ-carrageenan were applied as wall materials. The prepared microcapsules had good flow properties and encapsulation efficiencies (> 85%). Fourier transform infrared spectroscopy demonstrated that the mechanisms of layer-by-layer self-assembly between sodium caseinate and κ-carrageenan might be electrostatic adsorption and hydrogen bonding. The preparation process and excipients did not affect the antioxidant effect of astaxanthin. The in vitro simulated digestion study showed that microcapsules were mainly dissolved and digested in the simulated intestinal solution. Compared with its raw material, microencapsulation could improve the bio-accessibility of astaxanthin greatly. Then, astaxanthin-loaded microcapsules were incorporated into effervescent tablets by wet granulation and tablet-pressing methods. The dissolution of astaxanthin from effervescent tablets was over 90% in 2 h, which indicated a good dissolution effect. A cytotoxicity study revealed that astaxanthin loaded effervescent tablets had a good biocompatibility. Encapsulating astaxanthin-loaded microcapsules in effervescent tablets can improve its chemical stability.

CONCLUSION

Effervescent tablets containing microcapsules could be used to improve the solubility, stability and bio-accessibility of lipophilic bioactive compounds. © 2022 Society of Chemical Industry.

Soy Protein Isolate as Emulsifier of Nanoemulsified Beverages: Rheological and Physical Evaluation

The production of biologically active molecules or the addition of new bioactive ingredients in foods, thereby producing functional foods, has been improved with nanoemulsion technology. In this sense, the aim of this work was to develop nanoemulsified beverages as potential candidates for the encapsulation of bioactive compounds, whose integrity and release across the intestinal tract are controlled by the structure and stability of the interfaces. To achieve this, firstly, a by-product rich-in protein has been evaluated as a potential candidate to act as an emulsifier (chemical content, amino acid composition, solubility, ζ-potential and surface tension were evaluated). Later, emulsions with different soy protein isolate concentrations (0.5, 1.0, 1.5 and 2.0 wt%), pH values (2, 4, 6 and 8) and homogenization pressures (100, 120 and 140 PSI) were prepared using a high-pressure homogenizer after a pre-emulsion formation. Physical (stability via Backscattering and drop size evolution) and rheological (including interfacial analysis) characterizations of emulsions were carried out to characterize their potential as delivery emulsion systems. According to the results obtained, the nanoemulsions showed the best stability when the protein concentration was 2.0 wt%, pH 2.0 and 120 PSI was applied as homogenization pressure.

An Equilibrium State Diagram for Storage Stability and Conservation of Active Ingredients in a Functional Food Based on Polysaccharides Blends

A functional food as a matrix based on a blend of carbohydrate polymers (25% maltodextrin and 75% inulin) with quercetin and Bacillus claussi to supply antioxidant and probiotic properties was prepared by spray drying. The powders were characterized physiochemically, including by moisture adsorption isotherms, X-ray diffraction (XRD), scanning electron microscopy (SEM), and modulated differential scanning calorimetry (MDSC). The type III adsorption isotherm developed at 35 °C presented a monolayer content of 2.79 g of water for every 100 g of dry sample. The microstructure determined by XRD presented three regions identified as amorphous, semicrystalline, and crystalline-rubbery states. SEM micrographs showed variations in the morphology according to the microstructural regions as (i) spherical particles with smooth surfaces, (ii) a mixture of spherical particles and irregular particles with heterogeneous surfaces, and (iii) agglomerated irregular-shape particles. The blend's functional performance demonstrated antioxidant activities of approximately 50% of DPPH scavenging capacity and viability values of 6.5 Log10 CFU/g. These results demonstrated that the blend displayed functional food behavior over the complete interval of water activities. The equilibrium state diagram was significant for identifying the storage conditions that promote the preservation of functional food properties and those where the collapse of the microstructure occurs.

Porous Microparticles of Corn Starch as Bio-Carriers for Chia Oil

Native corn starch and pretreated corn starch were treated with α-amylase, glucoamylase and mixtures of both to generate starches with high porosity with conserved granular structure. Porous starches were characterized; particle size distribution analysis, nitrogen adsorption-desorption analysis, scanning electron microscopy, water and oil adsorption capacity, differential scanning calorimeter, X-ray diffraction and damaged starch techniques were used. The α-amylase/glucoamylase mixture at the highest dose was the best treatment to generate porous starches with interesting adsorption capacity and granular structure conservation. Selected starches were impregnated with chia oil using a vacuum. Pretreated corn starch modified with the α-amylase/glucoamylase mixture showed no significant differences on impregnation capacity compared with native starch with a similar enzyme treatment. The highest oxidative stability was achieved with pretreated porous starch impregnated with 10 to 25% chia oil, compared with the bulk oil (5.37 to 4.72 and 2.58 h, respectively). Results have demonstrated that vacuum impregnation could be a potential technique for the incorporation of oil in porous structures based on starch and porous starches obtained by enzymatic hydrolysis are a promising material for the incorporation and protection of oils susceptible to oxidation.

Recent Trends of Microfluidics in Food Science and Technology: Fabrications and Applications

The development of novel materials with microstructures is now a trend in food science and technology. These microscale materials may be applied across all steps in food manufacturing, from raw materials to the final food products, as well as in the packaging, transport, and storage processes. Microfluidics is an advanced technology for controlling fluids in a microscale channel (1~100 μm), which integrates engineering, physics, chemistry, nanotechnology, etc. This technology allows unit operations to occur in devices that are closer in size to the expected structural elements. Therefore, microfluidics is considered a promising technology to develop micro/nanostructures for delivery purposes to improve the quality and safety of foods. This review concentrates on the recent developments of microfluidic systems and their novel applications in food science and technology, including microfibers/films via microfluidic spinning technology for food packaging, droplet microfluidics for food micro-/nanoemulsifications and encapsulations, etc.

Recent Developments in the Microencapsulation of Fish Oil and Natural Extracts: Procedure, Quality Evaluation and Food Enrichment

Due to the beneficial health effects of omega-3 fatty acids and antioxidants and their limited stability in response to environmental and processing factors, there is an increasing interest in microencapsulating them to improve their stability. However, despite recent developments in the field, no specific review focusing on these topics has been published in the last few years. This work aimed to review the most recent developments in the microencapsulation of fish oil and natural antioxidant compounds. The impact of the wall material and the procedures on the quality of the microencapsulates were preferably evaluated, while their addition to foods has only been studied in a few works. The homogenization technique, the wall-material ratio and the microencapsulation technique were also extensively studied. Microcapsules were mainly analyzed for size, microencapsulation efficiency, morphology and moisture, while in vitro digestion, flowing properties, yield percentage and Fourier transform infrared spectroscopy (FTIR) were used more sparingly. Findings highlighted the importance of optimizing the most influential variables of the microencapsulation procedure. Further studies should focus on extending the range of analytical techniques upon which the optimization of microcapsules is based and on addressing the consequences of the addition of microcapsules to food products.

Emerging Food Packaging Applications of Cellulose Nanocomposites: A Review

Cellulose is the most abundant biopolymer on Earth, which is synthesized by plants, bacteria, and animals, with source-dependent properties. Cellulose containing β-1,4-linked D-glucoses further assembles into hierarchical structures in microfibrils, which can be processed to nanocellulose with length or width in the nanoscale after a variety of pretreatments including enzymatic hydrolysis, TEMPO-oxidation, and carboxymethylation. Nanocellulose can be mainly categorized into cellulose nanocrystal (CNC) produced by acid hydrolysis, cellulose nanofibrils (CNF) prepared by refining, homogenization, microfluidization, sonification, ball milling, and the aqueous counter collision (ACC) method, and bacterial cellulose (BC) biosynthesized by the Acetobacter species. Due to nontoxicity, good biodegradability and biocompatibility, high aspect ratio, low thermal expansion coefficient, excellent mechanical strength, and unique optical properties, nanocellulose is utilized to develop various cellulose nanocomposites through solution casting, Layer-by-Layer (LBL) assembly, extrusion, coating, gel-forming, spray drying, electrostatic spinning, adsorption, nanoemulsion, and other techniques, and has been widely used as food packaging material with excellent barrier and mechanical properties, antibacterial activity, and stimuli-responsive performance to improve the food quality and shelf life. Under the driving force of the increasing green food packaging market, nanocellulose production has gradually developed from lab-scale to pilot- or even industrial-scale, mainly in Europe, Africa, and Asia, though developing cost-effective preparation techniques and precisely tuning the physicochemical properties are key to the commercialization. We expect this review to summarise the recent literature in the nanocellulose-based food packaging field and provide the readers with the state-of-the-art of this research area.

Amelioration for oxidative stability and bioavailability of N-3 PUFA enriched microalgae oil: an overview

Technological improvements in dietary supplements and nutraceuticals have highlighted the significance of bioactive molecules in a healthy lifestyle. Eicosapentaenoic acid and Cervonic acid (DHA), omega-3 polyunsaturated fatty acids seem to be famed for their ability to prevent diverse physiological abnormalities. Selection of appropriate pretreatments and extraction techniques for extraction of lipids from robust microalgae cell wall are very important to retain their stability and bioactivity. Therefore, extraction techniques with optimized extraction parameters offer an excellent approach for obtaining quality oil with a high yield. Oils enriched in omega-3 are particularly imperiled to oxidation which ultimately affects customer acceptance. Bio active encapsulation could be one of the effective approaches to overcome this dilemma. This review paper aims to give insight into the cultivation methods, and downstream processes, various lipid extraction approaches, techniques for retaining oxidative stability, bioavailability and food applications based on extracted or encapsulated omega-3.

Microalgae as a potential therapeutic drug candidate for neurodegenerative diseases

Microalgae are highly photosynthetic unicellular organism that have increased demand in the recent days owing to the presence of valuable cellular metabolites. They are ubiquitous in terrestrial and aquatic habitats, rich in species diversity and are capable of generating significant biomass by efficiently using CO₂, light and other nutrients like nitrogen, phosphate etc., The microalgal biomass has upsurged in economic potential and is used as both food and feed in many countries across the world, accounting for more than 75 % of annual microalgal biomass production in the past decades. The microalgal cells are sustainable resource that synthesize various secondary metabolites such as carotenoids, polysaccharides, polyphenols, essential amino acids, sterols, and polyunsaturated fatty acids (PUFA). Microalgae and its derived compounds possess significant pharmacological and biological effects such as antioxidant, anti-inflammatory, anti-cancer, immunomodulatory and anti-obesity. Because of their potential health promoting properties, the utilization of microalgae and its derived substances in food, pharmaceutical and cosmetic industries has skyrocketed in recent years. In this context, the current review discusses about the benefits of microalgae and its bioactive compounds against several neurodegenerative disorders like Alzheimer's disease (AD), Parkinson's disease (PD), Huntington's disease (HD), and amyotrophic lateral sclerosis (ALS).

Preparation of starch-based functional food nano-microcapsule delivery system and its controlled release characteristics

Most of the functional substances in food are absorbed in the small intestine, but before entering the small intestine, the strong acid and enzymes in the stomach limit the amount that can reach the small intestine. Therefore, in this paper, to develop a delivery system for functional food ingredients, maintain the biological activity of the ingredients, and deliver them to the target digestive organs, preparation of starch-based functional food nano-microcapsule delivery system and its controlled release characteristics were reviewed. Embedding unstable food active ingredients in starch-based nano-microcapsules can give the core material excellent stability and certain functional effects. Starch-based wall materials refer to a type of natural polymer material that uses starch or its derivatives to coat fat-soluble components with its hydrophobic cavities. The preparation methods of starch-based wall materials mainly include spray drying, extrusion, freeze drying, ultra-high pressure, coagulation, fluidized bed coating, molecular inclusion, chemical, and enzymic methods. The controlled release of functional food can be achieved by preparing starch-based nano-microcapsules to encapsulate the active agents. It has been reported that that compared with traditional embedding agents such as gelatin, acacia gum, and xanthan gum, starch-based functional food nano-microcapsule delivery system had many good properties, including improving antioxidant capacity, bioavailability, probiotics, and concealing bad flavors. From this review, we can learn which method should be chosen to prepare starch-based functional food nano-microcapsule delivery system and understand the mechanism of controlled release.

Plant polysaccharides as novel biomaterials for microcapsule construction and therapeutics delivery

Natural polysaccharides derived from medicinal plants, that are Dendrobium (DPS), Lycium barbarum (LBP), Ginseng (GPS), and Poria Cocos (PCP) were firstly combined with sodium alginate (SA) to construct microcapsules and improved the morphology, encapsulation efficiency, Biocompatibility and protective capability in drug loading. Diverse typical therapeutics, including VO₂@ZIF67 nanoparticles, small molecule drugs salvianolic acid B (SaB)/ginsenoside (Rg1), probiotic Bacillus bifidus, and biomacromolecules SDF-1 were wrapped into 1.5 % GPS-0.5 % SA model microcapsules, respectively. Better mobility and formability were significantly observed, and showed 75 % survival rate of probiotics in simulated gastric juice and around 99 % encapsulation efficiency which is higher than single 2 % SA microcapsules. The microcapsules also obtained a delayed release and a higher cell index for SDF-1, which indicated better stability, biocompatibility and protective effect than single 2 % SA microcapsules. This study provides a strategy in developing plant derived polysaccharides as novel materials for the construction and improvement of traditional microcapsules.

Microencapsulation of Lactobacillus plantarum with enzymatic hydrolysate of soybean protein isolate for improved acid resistance and gastrointestinal survival in vitro

This study aimed to improve the acid resistance effect of Lactobacillus plantarum through microencapsulation with enzymatic hydrolysate of soybean protein isolate (EHSPI) and modified phospholipid. Response surface methodology was adopted to establish the optimal microencapsulation technology of L. plantarum, while coating characters were evaluated. Through response surface methodology, the optimal conditions were obtained as follows based on microencapsulation efficiency: the ratio of bacteria/EHSPI 1:1.83, EHSPI content 4.01%, modified phospholipid content 11.41%. The results of digestion in vitro showed that after passing through the simulated gastric fluid (SGF), the L. plantarum was released and reached 3.55 × 108 CFU/mL in the simulated intestinal fluid. Meanwhile, the surviving bacteria number of control significantly decreased to 2.63 × 104 CFU/mL (P < 0.05) at 120 min in SGF. In sum, the acid resistance and survival of L. plantarum were improved in SGF in vitro, through the microencapsulation technology based on EHSPI.

New Perspective on Natural Plant Protein-Based Nanocarriers for Bioactive Ingredients Delivery

The health effects of bioactive substances in the human body are affected by several factors, including food processing conditions, storage conditions, light and heat, among others. These factors greatly limit the stability and bioavailability of bioactive substances. These problems can be solved by a novel protein-based nanocarrier technology, which has the excellent potential to enhance solubility, bioavailability, and the controlled release of bioactive substances. In addition, plant protein has the advantages of economy, environmental protection, and high nutrition compared to animal protein. In this review, the preparation, characterization, and application of plant protein-based nanocarriers are summarized. The research deficiency and future prospects of plant protein nanocarriers are emphasized.

Value-Added Crackers Enriched with Red Onion Skin Anthocyanins Entrapped in Different Combinations of Wall Materials

The objective of this study was to encapsulate anthocyanins from red onion skins into different biopolymeric matrices as a way to develop powders with multifunctional activities. Two different variants of powders were obtained using a combination of gelation and freeze-drying techniques and characterized by encapsulation efficiency, antioxidant activity, phytochemical content, and color. Stability during storage and the bioavailability of anthocyanins in the in vitro simulated digestion were also examined. Powder V2, with a higher concentration of polysaccharides than V1, allowed a better encapsulation efficiency (90.53 ± 0.29%) and good stability during storage. Both variants had a high content of phytochemicals and antioxidant activity. In vitro investigations proved that an increased polysaccharides concentration offers the best protection for anthocyanins. Thus, a controlled release of the anthocyanins in the intestinal medium was achieved. The powder with the highest encapsulation efficiency was added to crackers, followed by phytochemical characterization to assess its potential added value. The addition of the micro-particles improved the functional characteristics such as antioxidant activity, showing its suitability for the development of bakery products. The attained results may bring implicit benefits to consumers, who can benefit from improved bioactive concentrations in foodstuffs, with significant health benefits.

Study on the formation and stability of polyol-in-oil emulsion

In this study, the influence of polyols, emulsifiers and oils on the formation and stability of polyol-in-oil (P/O) emulsions was investigated. The interfacial tension in P/O systems is much lower than that of water-oil systems, so polyols and oils showed a greater affinity, which was not conducive to the stability of the emulsion system. High compatibility of the emulsifier and the inner and outer phases was the key to the formation of stable emulsions. Using polyethylene glycol 400 (PEG) as polyol phase, mineral oil or squalane as oil phase and cetyl PEG/PPG-10/1 dimethicone (EM 90) as emulsifier, long-term stable P/O emulsions with homogeneous droplets were successfully prepared.

Microencapsulation of Natural Food Antimicrobials: Methods and Applications

The global demand for safe and healthy food with minimal synthetic preservatives is continuously increasing. Some natural food antimicrobials with strong antimicrobial activity and low toxicity have been considered as alternatives for current commercial food preservatives. Nonetheless, these natural food antimicrobials are hardly applied directly to food products due to issues such as food flavor or bioavailability. Recent advances in microencapsulation technology have the potential to provide stable systems for these natural antibacterials, which can then be used directly in food matrices. In this review, we focus on the application of encapsulated natural antimicrobial agents, such as essential oils, plant extracts, bacteriocins, etc., as potential food preservatives to extend the shelf-life of food products. The advantages and drawbacks of the mainly used encapsulation methods, such as molecular inclusion, spray drying, coacervation, emulsification, supercritical antisolvent precipitation and liposome and alginate microbeads, are discussed. Meanwhile, the main current applications of encapsulated antimicrobials in various food products, such as meat, dairy and cereal products for controlling microbial growth, are presented.

Double emulsions as delivery systems for iron: Stability kinetics and improved bioaccessibility in infants and adults

Iron deficiency is one of the main causes of anemia in the world, especially in children and women, so food fortification through microencapsulation is a viable alternative to combat this deficiency. The present work aimed to encapsulate iron in a water-in-oil-in-water double emulsion (W₁/O/W₂), which was formed with whey protein isolate and polyglycerol polyricinoleate as the emulsifying agents, tara gum as a thickening agent, and sucrose as an osmotic active substance. The double emulsion formed with 12% whey protein isolate, 0.8% tara gum, and 2% sucrose presented high encapsulation efficiency (96.95 ± 1.00%) and good stability (up to 7 days). Additionally, after the in vitro gastrointestinal simulations, the bioaccessibility was high for adults (49.54 ± 5.50%) and infants (39.71 ± 2.33%). Finally, the study show that double emulsions can form stable systems with high iron bioaccessibility even in infant gastric systems, which indicates the possibility of using double emulsions to fortify food with iron.

•

Stable double emulsions were obtained using WPI and PGPR as emulsifiers.

•

Tara gum ensured an increase in the general stability of the emulsion.

•

High bioaccessibility of iron were obtained for adults and infants.

•

Emulsions are presented as a potential alternative to be used in iron-fortified food.

Integrating diverse plant bioactive ingredients with cyclodextrins to fabricate functional films for food application: a critical review

The popularity of plant bioactive ingredients has become increasingly apparent in the food industry. However, these plant bioactive ingredients have many deficiencies, including low water solubility, poor stability, and unacceptable odor. Cyclodextrins (CDs), as cyclic molecules, have been extensively studied as superb vehicles of plant bioactive ingredients. These CD inclusion compounds could be added into various film matrices to fabricate bioactive food packaging materials. Therefore, in the present review, we summarized the extraction methods of plant bioactive ingredients, the addition of these CD inclusion compounds into thin-film materials, and their applications in food packaging. Furthermore, the release model and mechanism of active film materials based on various plant bioactive ingredients with CDs were highlighted. Finally, the current challenges and new opportunities based on these film materials have been discussed.

Co-microencapsulation: a promising multi-approach technique for enhancement of functional properties

Co-microencapsulation is a growing technique in the food industry because it is a technique that, under the same fundamentals of microencapsulation, allows the generation of microcapsules with a longer shelf life, using a smaller number of encapsulating materials and a smaller amount of active compounds, while having a greater beneficial activity. This responds to consumer demand for higher quality foods that limit the use of ingredients with low nutritional content and provide beneficial health effects, such as probiotics, prebiotics, vitamins, fatty acids, and compounds with antioxidant activity. The combination of two or more active compounds that achieve a synergy between them and between the encapsulating materials offers an advantage over the well-known microencapsulation. Among the main active compounds used in this process are probiotics, prebiotics, fatty acids, and polyphenols, the main combination being that of probiotics with one of the other active compounds that enhances their benefits. The present review discusses the advantages and disadvantages of the different encapsulating materials and techniques used to obtain co-microencapsulants, where the main result is a higher survival of probiotics, higher stability of the active compounds and a more controlled release, which can lead to the generation of new foods, food supplements, or therapeutic foods for the treatment of common ailments.

Physicochemical properties and Strength analysis of vitreous encapsulated solids for the safe delivery of β-Carotene

β-Carotene (β-Car) is insoluble compounds in water and liable to degradation, which has health benefits for human beings. Although layer-by-layer (LBL) emulsions provide a better protection for β-Car towards environmental stresses, the handling and transportation of LBL emulsions still faces restrictions. In this paper, therefore, the LBL emulsions including β-Car were carefully prepared and encapsulated to obtain vitreous encapsulated solids (VES) using trehalose and maltodextrins (MD) as wall materials. Morphological results indicated that the LBL emulsions were formed a spheric shape, in where the polyelectrolyte shell was 30 nm. The MD exhibited the characteristics of not easy to absorb moisture, suitable carrier, and good stabilizer, which could improve the stability of VES systems at studied environmental stresses. Despite compositional effects from MD and environmental stresses, LBL emulsions changed the water sorption behavior of VES as oil dispersion in storage. Strength analysis indicated that LBL emulsions lubricated systems and increased the molecular mobility of wall materials. Structural collapse, rapid color changes, and β-Car loss were confirmed in VES systems at 0.56 a_w from 25 to 45 °C after 30 days of storage. Besides, a relationship between S and β-Car loss kinetics was established, where the β-Car degraded more rapidly in a sample with quicker molecular mobility of wall materials Therefore, the controlling of molecular mobility in wall materials can slow down the β -Car degradation and improve the quality and stability of lipophilic nutrients delivery systems with high total solids.

Physicochemical and release behaviour of phytochemical compounds based on black jamun pulp extracts-filled alginate hydrogel beads through vibration dripping extrusion

The phytochemical-rich extract obtained from black jamun pulp were encapsulated using vibrating dripping extrusion technique. The utilisation of alginate (AL) with four variations of core-shell material comprising gum Arabic (AL-GA), guar gum (AL-GG), pectin (AL-P) and xanthan gum (AL-X) was engaged to form calcium-alginate based lyophilised jamun extract encapsulated beads. It resulted that among four variations, lyophilised alginate with AL-GG based encapsulated jamun extract filled beads have better physicochemical characteristics and 95% encapsulation efficiency. The results revealed the morphological comparison of each variation. The release behaviour of AL-GG based beads has a higher release of total phenolics (TPC) and total anthocyanin content (TAC). The release kinetics model involving Ritger-Peppas and Higuchi model were applied for release TPC and TAC of all variations of beads. The Ritger-Peppas model was found best suitable in terms of average R² (0.965) and lowest χ² (0.0039). The release kinetics study showed that AL-GA based beads followed by AL-GG could also be the best suitable in release behaviour using simulated gastrointestinal fluids at 140-160 min. Overall, results shown the encapsulated Jamun beads have the best agro-industrial efficacy in form of phytochemical compounds based microparticles, holding decent antioxidant potential.

Bioactives in bovine milk: chemistry, technology, and applications

The significance of dairy in human health and nutrition is gaining significant momentum as consumers continue to desire wholesome, nutritious foods to fulfill their health and wellness needs. Bovine milk not only consists of all the essential nutrients required for growth and development, it also provides a broad range of bioactive components that play an important role in managing human homeostasis and immune function. In recent years, milk bioactives, including α-lactalbumin, lactoferrin, glycomacropeptide, milk fat globule membrane, and milk oligosaccharides, have been intensively studied because of their unique bioactivity and functionality. Challenges for the application of these bioactive components in food and pharmaceutical formulations are associated with their isolation and purification on an industrial scale and also with their physical and chemical instability during processing, storage, and digestion. These challenges can be overcome by advanced separation techniques and sophisticated nano- or micro-encapsulation technologies. Current knowledge about the chemistry, separation, and encapsulation technology of major bioactives derived from bovine milk and their application in the food industry is reviewed here.

A comprehensive review on the development of probiotic supplemented confectioneries

Probiotics are living organisms that have beneficial effects on host by regulating the microbial balance of the intestinal system. While probiotics are naturally found in yogurt and other fermented foods, they can also be added to many products. Although mostly in dairy products, it is possible to see examples of food products supplemented by probiotics in bakeries, chocolates and confectioneries. Nowadays, the COVID-19 pandemic that the world suffers increased the demand for such functional food products including probiotics. Due to probiotics having potential effects on strengthening the immune system, confectioneries supplemented by probiotics were comprehensively discussed in this review together with the suggestion of a novel gelly composition. The suggested formulation of the product is a gel-like snack contains natural ingredients such as carrot, lemon juice and sugar provided from apples. This research review article provided a guide together with the recommendations for potential probiotic research in candy and confectionery industry.