Pulsed light as an emerging technology to cause disruption for food and adjacent industries – Quo vadis?

Comparing resistance of bacterial spores and fungal conidia to pulsed light and UVC radiation at a wavelength of 254 nm

Pulsed light (PL) inactivates microorganisms by UV-rich, high-irradiance and short time pulses (250 μs) of white light with wavelengths from 200 nm to 1100 nm. PL is applied for disinfection of food packaging material and food-contact equipment. Spores of seven Bacillus ssp. strains and one Geobacillus stearothermophilus strain and conidia of filamentous fungi (One strain of Aspergillus brasiliensis, A. carbonarius and Penicillium rubens) were submitted to PL (fluence from 0.23 J/cm2 to 4.0 J/cm2) and UVC (at λ = 254 nm; fluence from 0.01 J/cm2 to 3.0 J/cm2). One PL flash at 3 J/cm2 allowed at least 3 log-reduction of all tested microorganisms. The emetic B. cereus strain F4810/72 was the most resistant of the tested spore-forming bacteria. The PL fluence to 3 log-reduction (F3 PL) of its spores suspended in water was 2.9 J/cm2 and F3 UVC was 0.21 J/cm2, higher than F3 PL and F3 UVC of spores of B. pumilus SAFR-032 2.0 J/cm2 and 0.15 J/cm2, respectively), yet reported as a highly UV-resistant spore-forming bacterium. PL and UVC sensitivity of bacterial spores was correlated. Aspergillus spp. conidia suspended in water were poorly sensitive to PL. In contrast, PL inactivated Aspergillus spp. conidia spread on a dry surface more efficiently than UVC. The F2 PL of A. brasiliensis DSM1988 was 0.39 J/cm2 and F2 UVC was 0.83 J/cm2. The resistance of spore-forming bacteria to PL could be reasonably predicted from the knowledge of their UVC resistance. In contrast, the sensitivity of fungal conidia to PL must be specifically explored.

Use of real-time immersive digital training and educational technologies to improve patient safety during the processing of reusable medical devices: Quo Vadis?

Hospital acquired infections stemming from contaminated reusable medical devices are of increasing concern. This issue is exaggerated with the introduction of complex medical devices like endoscopes and robotic instrumentation. Although medical device manufacturers validate their cleaning instructions for use, evidence in the literature demonstrates that effective device processing is not being performed consistently within sterile processing departments in clinical settings. The result is increased risks to patient safety. As a solution to this problem, focused one-on-one training increases compliance to the medical device manufacturer's processing instruction. However, often this is not a practical solution for the volume of healthcare staff responsible for device processing activities. This constitutes the first paper to address the blended use of educational and digital technologies to address these challenges and as a result inform safety and sustainability for the medical device sector. Cognitive learning theory is an evidence-based framework for learning. It supports the use of immersive educational experiences using emerging extended reality technologies (e.g., virtual or augmented reality) to increase learning comprehension. The delivery of educational content via these technologies provides an innovative option for repeatable leaning and training outcomes. The motivation is to decrease patient risk of contaminated reusable medical devices. The proposed approach while primary motivated by safety can also enhance sustainability and efficiency enabled by artificial intelligence and robotic instrumentation.

Studies on the novel effects of electron beam treated pollen on colony reproductive output in commercially-reared bumblebees (Bombus terrestris) for mass pollination applications

Commercially-reared bumblebees provide an important pollinator service that helps support food production and security. The deployment of an appropriate non-thermal disinfection technology for the bulk treatment of pollen collected from honeybees for the feeding of commercial bumblebees is important in order to mitigate against complex diseases and unwanted pathogen spillover to native bees. High level disinfection of pollen was achieved using an electron (e)-beam dose of 100 kGy that corresponded to 78 % loss of cellular viability of bee pathogens before feeding to bumblebees as measured by the novel in vitro use of flow cytometry (FCM). Novel findings showed that e-beam treated-pollen that was fed to bumblebees produced fewer females, gynes and exhibited an absence of males when compared to control bumblebee colonies that were fed untreated commercial pollen. A similar trend emerged in bumblebee colony reproductive outputs when using membrane filtered washed pollen. Proteomic analysis of bumblebees from individual colonies fed with treated-pollen revealed a differential abundance of proteins associated with stress, immunity and metabolism when compared to the untreated pollen control group. Microbiome analysis of the bumblebee gut content revealed differences in microbiota between treated and untreated pollen in bumblebee colony studies. This novel study evaluated the impact of industrial e-beam treated-pollen on complex bee disease mitigation where physically treated-pollen fed to bumblebees was shown to substantially affect colony reproductive outputs.

Effect of pulsed light on curcumin chemical stability and antioxidant capacity

Curcumin is the major bioactive component in turmeric with potent antioxidant activity. Little is known about how pulsed light (PL) technology (an emerging non-thermal food processing technology relying on high intensity short duration flashes of light) can affect the chemical stability and antioxidant capacity of curcumin. This study found that PL treatment of fluence levels from 0 to 12.75 J/cm2 produced a fluence-dependent reduction in curcumin content. These results paralleled the production of a tentative curcumin dimer, identified as a potential photochemical transformation product. PL-treated curcumin at relatively higher fluence levels decreased chemical-based ORAC and ABTS antioxidant capacity, relative to control (P < 0.05). This contrasted the effect observed to increase coincidently both intracellular antioxidant capacity (e.g., DCFH-DA (P < 0.05)) and GSH/GSSG ratio (P < 0.05), respectively, in cultured differentiated Caco-2 cells. In conclusion, the application of PL on curcumin results in photochemical transformation reactions, such as dimerization, which in turn, can enhance biological antioxidant capacity in differentiated Caco-2 cells.

Ultraviolet C irradiation: A promising approach for the disinfection of public spaces?

Ultraviolet irradiation C (UVC) has emerged as an effective strategy for microbial control in indoor public spaces. UVC is commonly applied for air, surface, and water disinfection. Unlike common 254 nm UVC, far-UVC at 222 nm is considered non-harmful to human health, being safe for occupied spaces, and still effective for disinfection purposes. Therefore, and allied to the urgency to mitigate the current pandemic of SARS-CoV-2, an increase in UVC-based technology devices appeared in the market with levels of pathogens reduction higher than 99.9 %. This environmentally friendly technology has the potential to overcome many of the limitations of traditional chemical-based disinfection approaches. The novel UVC-based devices were thought to be used in public indoor spaces such as hospitals, schools, and public transport to minimize the risk of pathogens contamination and propagation, saving costs by reducing manual cleaning and equipment maintenance provided by manpower. However, a lack of information about UVC-based parameters and protocols for disinfection, and controversies regarding health and environmental risks still exist. In this review, fundamentals on UVC disinfection are presented. Furthermore, a deep analysis of UVC-based technologies available in the market for the disinfection of public spaces is addressed, as well as their advantages and limitations. This comprehensive analysis provides valuable inputs and strategies for the development of effective, reliable, and safe UVC disinfection systems.

A review of Spaulding's classification system for effective cleaning, disinfection and sterilization of reusable medical devices: Viewed through a modern-day lens that will inform and enable future sustainability

Despite advances in medicine and innovations in many underpinning fields including disease prevention and control, the Spaulding classification system, originally proposed in 1957, remains widely used for defining the disinfection and sterilization of contaminated re-usable medical devices and surgical instruments. Screening PubMed and Scopus databases using a PRISMA guiding framework generated 272 relevant publications that were used in this review. Findings revealed that there is a need to evolve how medical devices are designed, and processed by cleaning, disinfection (and/or sterilization) to mitigate patient risks, including acquiring an infection. This Spaulding Classification remains in use as it is logical, easily applied and understood by users (microbiologists, epidemiologists, manufacturers, industry) and by regulators. However, substantial changes have occurred over the past 65 years that challenge interpretation and application of this system that includes inter alia emergence of new pathogens (viruses, mycobacteria, protozoa, fungi), a greater understanding of innate and adaptive microbial tolerance to disinfection, toxicity risks, increased number of vulnerable patients and associated patient procedures, and greater complexity in design and use of medical devices. Common cited examples include endoscopes that enable non- or minimal invasive procedures but are highly sophisticated with various types of materials (polymers, electronic components etc), long narrow channels, right angle and heat-sensitive components and various accessories (e.g., values) that can be contaminated with high levels of microbial bioburden and patient tissues after use. Contaminated flexible duodenoscopes have been a source of several significant infection outbreaks, where at least 9 reported cases were caused by multidrug resistant organisms [MDROs] with no obvious breach in processing detected. Despite this, there is evidence of the lack of attention to cleaning and maintenance of these devices and associated equipment. Over the last few decades there is increasing genomic evidence of innate and adaptive resistance to chemical disinfectant methods along with adaptive tolerance to environmental stresses. To reduce these risks, it has been proposed to elevate classification of higher-risk flexible endoscopes (such as duodenoscopes) from semi-critical [contact with mucous membrane and intact skin] to critical use [contact with sterile tissue and blood] that entails a transition to using low-temperature sterilization modalities instead of routinely using high-level disinfection; thus, increasing the margin of safety for endoscope processing. This timely review addresses important issues surrounding use of the Spaulding classification system to meet modern-day needs. It specifically addresses the need for automated, robust cleaning and drying methods combined with using real-time monitoring of device processing. There is a need to understand entire end-to-end processing of devices instead of adopting silo approaches that in the future will be informed by artificial intelligence and deep-learning/machine learning. For example, combinational solutions that address the formation of complex biofilms that harbour pathogenic and opportunistic microorganisms on the surfaces of processed devices. Emerging trends are addressed including future sustainability for the medical devices sector that can be enabled via a new Quintuple Helix Hub approach that combines academia, industry, healthcare, regulators, and society to unlock real world solutions.

Current decontamination challenges and potentially complementary solutions to safeguard the vulnerable seafood industry from recalcitrant human norovirus in live shellfish: Quo Vadis?

Safeguarding the seafood industry is important given its contribution to supporting our growing global population. However, shellfish are filter feeders that bioaccumulate microbial contaminants in their tissue from wastewater discharged into the same coastal growing environments leading to significant human disease outbreaks unless appropriately mitigated. Removal or inactivation of enteric viruses is very challenging particularly as human norovirus (hNoV) binds to specific histo-blood ligands in live oyster tissue that are consumed raw or lightly cooked. The regulatory framework that sets out use of clean seawater and UV disinfection is appropriate for bacterial decontamination at the post-harvest land-based depuration (cleaning) stage. However, additional non-thermal technologies are required to eliminate hNoV in live shellfish (particularly oysters) where published genomic studies report that low-pressure UV has limited effectiveness in inactivating hNoV. The use of the standard genomic detection method (ISO 15, 216-1:2017) is not appropriate for assessing the loss of infectious hNoV in treated live shellfish. The use of surrogate viral infectivity methods appear to offer some insight into the loss of hNoV infectiousness in live shellfish during decontamination. This paper reviews the use of existing and potentially other combinational treatment approaches to enhance the removal or inactivation of enteric viruses in live shellfish. The use of alternative and complementary novel diagnostic approaches to discern viable hNoV are discussed. The effectiveness and virological safety of new affordable hNoV intervention(s) require testing and validating at commercial shellfish production in conjunction with laboratory-based research. Appropriate risk management planning should encompass key stakeholders including local government and the wastewater industry. Gaining a mechanistic understanding of the relationship between hNoV response at molecular and structural levels in individually treated oysters as a unit will inform predictive modeling and appropriate treatment technologies. Global warming of coastal growing environments may introduce additional contaminant challenges (such as invasive species); thus, underscoring need to develop real-time ecosystem monitoring of growing environments to alert shellfish producers to appropriately mitigate these threats.

Pulsed ultraviolet (PUV) disinfection of artificially contaminated seawater seeded with high levels of pathogen disease indicators as an alternative for the shellfish industry depuration systems

The increase in pathogen levels in seawater threatens the safety of entire aquatic ecosystems. Foodborne pathogens can potentially accumulate in shellfish, especially in filter feeders such as bivalves, requiring an efficient depuration process before consumption. Alternative approaches to promote a cost-efficient purge at depuration plants are urgently needed. A small prototype pulsed ultraviolet (PUV) light recirculation system was designed, and its depuration potential was tested in a seawater matrix artificially contaminated with high levels of microbial pathogens Escherichia coli, Staphylococcus aureus, Salmonella typhimurium, Bacillus cereus and Candida albicans. The analysis of treatment parameters including voltage, number of pulses and duration of treatment was performed to ensure the highest reduction in contaminant levels. Optimal PUV disinfection was attained at 60 pulses/min at 1 kV for 10 min (a UV output of 12.9 J/cm²). All reductions were statistically significant, and the greatest was observed for S. aureus (5.63 log₁₀), followed by C. albicans (5.15 log₁₀), S. typhimurium (5 log₁₀), B. cereus (4.59 log₁₀) and E. coli (4.55 log₁₀). PUV treatment disrupted the pathogen DNA with the result that S. aureus, C. albicans and S. typhimurium were not detectable by PCR. Regulations were reviewed to address the applicability of PUV treatment as a promising alternative to assist in the reduction of microbial pathogens at depuration plants due to its high efficiency, short treatment period, high UV dose and recirculation system as currently employed in shellfish depuration plants.

Challenges and future opportunities to unlock the critical supply chain of personal and protective equipment (PPE) encompassing decontamination and reuse under emergency use authorization (EUA) conditions during the COVID-19 pandemic: Through a reflective circularity and sustainability lens

Severe acute respiratory syndrome Coronavirus-2 (SARS-CoV-2), and the resulting coronavirus disease (COVID-19), was declared a public health emergency of global concern by the World Health Organization (WHO) in the early months of 2020. There was a marked lack of knowledge to inform national pandemic response plans encompassing appropriate disease mitigation and preparation strategies to constrain and manage COVID-19. For example, the top 16 "most cited" papers published at the start of the pandemic on core knowledge gaps collectively constitute a staggering 29,393 citations. Albeit complex, appropriate decontamination modalities have been reported and developed for safe reuse of personal and protective equipment (PPE) under emergency use authorization (EUA) where critical supply chain shortages occur for healthcare workers (HCWs) caused by the COVID-19 pandemic. Commensurately, these similar methods may provide solutions for the safe decontamination of enormous volumes of PPE waste promoting opportunities in the circular bioeconomy that will also protect our environment, habitats and natural capital. The co-circulation of the highly transmissive mix of COVID-19 variants of concern (VoC) will continue to challenge our embattled healthcare systems globally for many years to come with an emphasis placed on maintaining effective disease mitigation strategies. This viewpoint article addresses the rationale and key developments in this important area since the onset of the COVID-19 pandemic and provides an insight into a variety of potential opportunities to unlock the long-term sustainability of single-use medical devices, including waste management.

Pathogenic Drug Resistant Fungi: A Review of Mitigation Strategies

Fungal pathogens cause significant human morbidity and mortality globally, where there is a propensity to infect vulnerable people such as the immunocompromised ones. There is increasing evidence of resistance to antifungal drugs, which has significant implications for cutaneous, invasive and bloodstream infections. The World Health Organization (WHO) published a priority list of fungal pathogens in October 2022, thus, highlighting that a crisis point has been reached where there is a pressing need to address the solutions. This review provides a timely insight into the challenges and implications on the topic of antifungal drug resistance along with discussing the effectiveness of established disease mitigation modalities and approaches. There is also a need to elucidate the cellular and molecular mechanisms of fungal resistance to inform effective solutions. The established fungal decontamination approaches are effective for medical device processing and sterilization, but the presence of pathogenic fungi in recalcitrant biofilms can lead to challenges, particularly during cleaning. Future design ideas for implantable and reusable medical devices should consider antifungal materials and appropriates for disinfection, and where it is relevant, sterilization. Preventing the growth of mycotoxin-producing fungi on foods through the use of appropriate end-to-end processes is advisable, as mycotoxins are recalcitrant and challenging to eliminate once they have formed.

Dry surface biofilms in the food processing industry: An overview on surface characteristics, adhesion and biofilm formation, detection of biofilms, and dry sanitization methods

Bacterial biofilm formation in low moisture food processing (LMF) plants is related to matters of food safety, production efficiency, economic loss, and reduced consumer trust. Dry surfaces may appear dry to the naked eye, however, it is common to find a coverage of thin liquid films and microdroplets, known as microscopic surface wetness (MSW). The MSW may favor dry surface biofilm (DSB) formation. DSB formation is similar in other industries, it occurs through the processes of adhesion, production of extracellular polymeric substances, development of microcolonies and maturation, it is mediated by a quorum sensing (QS) system and is followed by dispersal, leading to disaggregation. Species that survive on dry surfaces develop tolerance to different stresses. DSB are recalcitrant and contribute to higher resistance to sanitation, becoming potential sources of contamination, related to the spoilage of processed products and foodborne disease outbreaks. In LMF industries, sanitization is performed using physical methods without the presence of water. Although alternative dry sanitizing methods can be efficiently used, additional studies are still required to develop and assess the effect of emerging technologies, and to propose possible combinations with traditional methods to enhance their effects on the sanitization process. Overall, more information about the different technologies can help to find the most appropriate method/s, contributing to the development of new sanitization protocols. Thus, this review aimed to identify the main characteristics and challenges of biofilm management in low moisture food industries, and summarizes the mechanisms of action of different dry sanitizing methods (alcohol, hot air, UV-C light, pulsed light, gaseous ozone, and cold plasma) and their effects on microbial metabolism.

Use of next generation sequencing and bioinformatics for profiling freshwater eukaryotic microalgae in a novel peatland integrated multi-trophic aquaculture (IMTA) system: Case study from the Republic of Ireland

Development of integrated multi-trophic aquaculture (IMTA) systems constitutes a step change in the sustainable production of freshwater fish to meet emerging needs for high-protein foods globally. Recently, there has been a paradigm shift away from harvesting peat as a fuel towards the development of wettable peatland innovation (termed 'paludiculture'), such as aquaculture. Such eco-innovations support carbon sequestration and align with a balanced environmental approach to protecting biodiversity. This novel peatland-based IMTA process in the Irish midlands relies upon natural microalgae for waste treatment, recirculation and water quality where there is no use of pesticides or antibiotics. This novel IMTA system is powered with a wind turbine and the process has 'organic status'; moreover, it does not discharge aquaculture effluent to receiving water. However, there is a significant lack of understanding as to diversity of microalgae in this 'paludiculture'-based IMTA processes. This constitutes the first case study to use conventional microscopy combined with next-generation sequencing and bioinformatics to profile microalgae occurring in this novel IMTA system from pooled samples over a 12 month period in 2020. Conventional microscopy combined with classic identification revealed twenty genera of algae; with Chlorophyta and Charophyta being the most common present. However, algal DNA isolation, 16 s sequencing and bioinformatics revealed a combined total of 982 species from 341 genera across nine phyla from the same IMTA system, which emphasized a significant underestimation in the number and diversity of beneficial or potentially harmful algae in the IMTA-microbiome. These new methods also yield rich data that can be used by digital technologies to transform future monitoring and performance of the IMTA system for sustainability. The findings of this study align with many sustainability development goals of the United Nations including no poverty, zero hunger, good health and well-being, responsible consumption and production, climate change, and life below water.

Effectiveness of front line and emerging fungal disease prevention and control interventions and opportunities to address appropriate eco-sustainable solutions

Fungal pathogens contribute to significant disease burden globally; however, the fact that fungi are eukaryotes has greatly complicated their role in fungal-mediated infections and alleviation. Antifungal drugs are often toxic to host cells and there is increasing evidence of adaptive resistance in animals and humans. Existing fungal diagnostic and treatment regimens have limitations that has contributed to the alarming high mortality rates and prolonged morbidity seen in immunocompromised cohorts caused by opportunistic invasive infections as evidenced during HIV and COVID-19 pandemics. There is a need to develop real-time monitoring and diagnostic methods for fungal pathogens and to create a greater awareness as to the contribution of fungal pathogens in disease causation. Greater information is required on the appropriate selection and dose of antifungal drugs including factors governing resistance where there is commensurate need to discover more appropriate and effective solutions. Popular azole fungal drugs are widely detected in surface water and sediment due to incomplete removal in wastewater treatment plants where they are resistant to microbial degradation and may cause toxic effects on aquatic organisms such as algae and fish. UV has limited effectiveness in destruction of anti-fungal drugs where there is increased interest in the combination approaches such as novel use of pulsed-plasma gas-discharge technologies for environmental waste management. There is growing interest in developing alternative and complementary green eco-biocides and disinfection innovation. Fungi present challenges for cleaning, disinfection and sterilization of reusable medical devices such as endoscopes where they (example, Aspergillus and Candida species) can be protected when harboured in build-up biofilm from lethal processing. Information on the efficacy of established disinfection and sterilization technologies to address fungal pathogens including bottleneck areas that present high risk to patients is lacking. There is a need to address risk mitigation and modelling to inform efficacy of appropriate intervention technologies that must consider all contributing factors where there is potential to adopt digital technologies to enable real-time analysis of big data, such as use of artificial intelligence and machine learning. International consensus on standardised protocols for developing and reporting on appropriate alternative eco-solutions must be reached, particularly in order to address fungi with increasing drug resistance where research and innovation can be enabled using a One Health approach.

Synergetic Effect of Metschnikowia pulcherrima and Lachancea thermotolerans in Acidification and Aroma Compounds in Airén Wines

On the one hand, the species Lachancea thermotolerans is known for its high genetic diversity, allowing for the existence of strains that produce high concentrations of lactic acid. In contrast, the species Metschnikowia pulcherrima is renowned for its high enzymatic activity capable of producing aromatic esters during fermentation. By enhancing acidity and boosting the concentration of aromatic compounds, both species are currently used to enhance the organoleptic profile of wines. In this regard, ternary fermentations with M. pulcherrima and L. thermotolerans were carried out and the wines produced were further analysed with GC-FID, FTIR, and UV-Vis spectrophotometry. The outcomes showed that the species M. pulcherrima favored an increase in ethyl lactate (between 37 and 41 mg/L) along with an increased concentration of 2-phenylethyl alcohol (between 30 and 35 mg/L), whereas the species L. thermotolerans was able to produce 1 g/L of lactic acid in ternary fermentations. Additionally, pH levels were slightly lower in these fermentations and the color of the white wines produced showed less chemical oxidation as hue values were lower than the control. Finally, the ternary fermentations of L. thermotolerans and M. pulcherrima had higher overall rating in the tasting. In conclusion, ternary fermentations involving these two non-Saccharomyces species are suggested as a substitute for spontaneous fermentations in the production of wines from neutral varieties to express freshness more vividly. This biotechnology may be further favored by the possibility of applying emerging technologies for the removal of microorganisms in grapes and musts.

Nonthermal pasteurization of pineapple juice: A review on the potential of achieving microbial safety and enzymatic stability

Pineapple juice is preferred by consumers for its unique aroma and flavor that come from a set of amino acids, amines, phenolic compounds, and furanone. The juice is susceptible to spoilage, and a common practice is to pasteurize it at 70-95°C for 0.5-5 min. However, the characteristic flavors and phytochemicals are negatively influenced by the intense time-temperature treatment. To retain the thermosensitive compounds in the juice, some nonthermal technologies such as high-pressure processing, pulsed electric field, pulsed light, ultrasound, and ultraviolet treatments have been explored. These techniques ensured microbial safety (5-log reduction in E. coli, S. Typhimurium, or S. cerevisiae) while preserving a maximum ascorbic acid (84-99%) in the juice. The shelf life of these nonthermally treated juice varied between 14 days (UV treated at 7.5 mJ/cm² ) and 6 months (clarified through microfiltration). Moreover, the inactivation of spoilage enzyme in the juice required a higher intensity. The present review discusses the potential of several nonthermal techniques employed for the pasteurization of pineapple juice. The pasteurization ability of the combined hurdle between mild thermal and nonthermal processing is also presented. The review also summarizes the target for pasteurization, the plan to design a nonthermal processing intensity, and the consumer perspective toward nonthermally treated pineapple juice. The techniques are compared on the common ground like safety, stability, and quality of the juice. This will help readers to select an appropriate nonthermal technology for pineapple juice production and design the intensity required to satisfy the manufacturers, retailers, and consumers.

Digital transformation of peatland eco-innovations ('Paludiculture'): Enabling a paradigm shift towards the real-time sustainable production of 'green-friendly' products and services

The world is heading in the wrong direction on carbon emissions where we are not on track to limit global warming to 1.5 °C; Ireland is among the countries where overall emissions have continued to rise. The development of wettable peatland products and services (termed 'Paludiculture') present significant opportunities for enabling a transition away from peat-harvesting (fossil fuels) to developing 'green' eco-innovations. However, this must be balanced with sustainable carbon sequestration and environmental protection. This complex transition from 'brown to green' must be met in real time by enabling digital technologies across the full value chain. This will potentially necessitate creation of new green-business models with the potential to support disruptive innovation. This timely paper describes digital transformation of paludiculture-based eco-innovation that will potentially lead to a paradigm shift towards using smart digital technologies to address efficiency of products and services along with future-proofing for climate change. Digital transform of paludiculture also aligns with the 'Industry 5.0 - a human-centric solution'. However, companies supporting peatland innovation may lack necessary standards, data-sharing or capabilities that can also affect viable business model propositions that can jeopardize economic, political and social sustainability. Digital solutions may reduce costs, increase productivity, improve produce develop, and achieve faster time to market for paludiculture. Digitisation also enables information systems to be open, interoperable, and user-friendly. This constitutes the first study to describe the digital transformation of paludiculture, both vertically and horizontally, in order to inform sustainability that includes process automation via AI, machine learning, IoT-Cloud informed sensors and robotics, virtual and augmented reality, and blockchain for cyber-physical systems. Thus, the aim of this paper is to describe the applicability of digital transformation to actualize the benefits and opportunities of paludiculture activities and enterprises in the Irish midlands with a global orientation.

Lifestyle of Listeria monocytogenes and food safety: Emerging listericidal technologies in the food industry

Listeria monocytogenes, a causative agent of listeriosis, is a major foodborne pathogen. Among pathogens, L. monocytogenes stands out for its unique ecological and physiological characteristics. This distinct lifestyle of L. monocytogenes has a significant impact on food safety and public health, mainly through the ability of this pathogen to multiply at refrigeration temperature and to persist in the food processing environment. Due to a combination of these characteristics and emerging trends in consumer preference for ready-to-eat and minimally processed food, there is a need to develop effective and sustainable approaches to control contamination of food products with L. monocytogenes. Implementation of an efficient and reliable control strategy for L. monocytogenes must first address the problem of cross-contamination. Besides the preventive control strategies, cross-contamination may be addressed with the introduction of emerging post packaging non-thermal or thermal hurdles that can ensure delivery of a listericidal step in a packed product without interfering with the organoleptic characteristics of a food product. This review aims to present the most relevant findings underlying the distinct lifestyle of L. monocytogenes and its impact on food safety. We also discuss emerging food decontamination technologies that can be used to better control L. monocytogenes.

Effects of climate and environmental variance on the performance of a novel peatland-based integrated multi-trophic aquaculture (IMTA) system: Implications and opportunities for advancing research and disruptive innovation post COVID-19 era

Advancing wet peatland 'paludiculture' innovation present enormous potential to sustain carbon-cycles, reduce greenhouse-gas (GHG) gas emissions and to transition communities to low-carbon economies; however, there is limited scientific-evidence to support and enable direct commercial viability of eco-friendly products and services. This timely study reports on a novel, paludiculture-based, integrated-multi-trophic-aquaculture (IMTA) system for sustainable food production in the Irish midlands. This freshwater IMTA process relies on a naturally occurring ecosystem of microalgae, bacteria and duckweed in ponds for managing waste and water quality that is powered by wind turbines; however, as it is recirculating, it does not rely upon end-of-pipe solutions and does not discharge effluent to receiving waters. This constitutes the first report on the effects of extreme weather events on the performance of this IMTA system that produces European perch (Perca fluviatilis), rainbow trout (Oncorhynchus mykiis) during Spring 2020. Sampling coincided with lockdown periods of worker mobility restriction due to COVID-19 pandemic. Observations revealed that the frequency and intensity of storms generated high levels of rainfall that disrupted the algal and bacterial ecosystem in the IMTA leading to the emergence and predominance of toxic cyanobacteria that caused fish mortality. There is a pressing need for international agreement on standardized set of environmental indicators to advance paludiculture innovation that addresses climate-change and sustainability. This study describes important technical parameters for advancing freshwater aquaculture (IMTA), which can be future refined using real-time monitoring-tools at farm level to inform management decision-making based on evaluating environmental indicators and weather data. The relevance of these findings to informing global sustaining and disruptive research and innovation in paludiculture is presented, along with alignment with UN Sustainable Development goals. This study also addresses global challenges and opportunities highlighting a commensurate need for international agreement on resilient indicators encompassing linked ecological, societal, cultural, economic and cultural domains.

Inactivation of hepatitis A virus and norovirus on berries by broad-spectrum pulsed light

Foodborne diseases are still a major global health and economic burden, and are mainly caused by viral pathogens, such as human norovirus and hepatitis A virus, which may remain infective for long times on food contact surfaces and on produce. The strategies of viral inactivation applied in the industry are not generally suitable for delicate foods such as berries. Brief exposure to high-intensity white light (UV to IR) has been shown to inactivate many bacteria. The effectiveness of this treatment against foodborne viruses on fresh produce is largely unknown. We show that pulsed light treatment causes a moderate drop in the luminosity (L*, which ranges from bright (high) to dark (low)) of blueberries (to 36.31 ± 0.99 from 42.47 ± 1.17) and affects the luminosity of lettuce slightly but does not affect the appearance of strawberries, blackberries or raspberries. Hepatitis A virus and murine norovirus 1 are thus reduced by 2 log cycles. Viral inactivation on blackberries was less effective. These results will help food industries evaluate the suitability of pulsed light disinfecting technology for specific fruits and vegetables.

Current insights into non-thermal preservation technologies alternative to conventional high-temperature short-time pasteurization of drinking milk

Milk is an important nutritional food source characterized by a perishable nature and conventionally thermally treated to guarantee its safety. In recent years, an increasing focus on competing non-thermal food processing technologies has been driven mainly by consumers' expectations for minimally processed products. Due to the heat sensitivity of milk, much research interest has been addressed to mild non-thermal pasteurization processing to keep safety, 'fresh-like' taste and to maintain the organoleptic qualities of raw milk. This review provides an overview of the current literature on non-thermal treatments as standalone alternative technologies to high-temperature short-time (HTST) pasteurization of drinking milk. Results of lab-scale experimentations suggest the feasibility of most emerging non-thermal processing technologies, including high hydrostatic pressure, pulsed electric field, cold plasma, cavitation and light-based technologies, as alternative to thermal treatment of drinking milk with premium in shelf life duration. Nevertheless, a series of regulatory, technological and economical hurdles hinder the industrial scaling-up for most of these substitutes. To date, only high hydrostatic pressure treatments are applied as alone alternative to HTSH pasteurization for processing of "cold pasteurized" drinking milk. Milk submitted to HTST treatment combined to ultraviolet light is currently accepted in EU countries as novel food.

Antimicrobial effect of radiant catalytic ionization

The main purpose of micro-organisms elimination from the air and surfaces is to ensure microbiological safety in health care facilities or food production plants. Currently, many disinfection methods are used, both physical, chemical and, increasingly, biological. Scientists seek new solutions with high antimicrobial effectiveness (especially against the drug-resistant strains of bacteria), low production and operating costs, and, above all, the safety of patients and food consumers. The limitation of the methods used so far is primarily the micro-organisms acquire the resistance, mainly to antimicrobial agents. One of the new and alternative methods of disinfection is radiant catalytic ionization (RCI). RCI is an active method of air and surface purification. The technology proved high efficiency against viruses, Gram-positive and -negative bacteria, and fungi, both in the air and on surfaces (planktonic forms and biofilm). RCI has many advantages as well as some minor limitations. This overview summarizes the current knowledge about RCI technology.

Postharvest Treatment of Chinese Kale (Brassica oleracea var. alboglabra) by Pulse Light to Removal of Microbial Load, Pesticide Residue and Integrity of Physicochemical Quality and Phytochemical Constituent

Existence of microorganisms, pesticide residue on fresh vegetables has a potential hazard to human health. The demand for safe green Chinese kale (Brassica oleracea var. alboglabra) has increased recently. Chinese kale is a healthy botanical attached to the Brassicaceae class. It contains numerous nutritional and phytochemical constituents beneficial for human health. Besides health benefits, this green vegetable also poses food safety concerns due to pathogen and pesticide residue during cultivation. Non-thermal physical technology like pulsed light (PL) will be a promising alternative to eradicate microbial and pesticide residue while preserving the best physicochemical properties and phytochemical components. This research evaluated the influence of different pulsed light intensities (1.2-10.8 J/cm2) on the removal of microbial load and pesticide residue as well as weight attrition, texture hardness, dry matter, vitamin C, total phenolic content in the treated Chinese kale. Results showed that pulsed light intensity 8.4 J/cm2 was appropriate to completely eliminate pathogenic bacteria such as Escherichia coli, Staphylococcus aureus, Salmonella; pesticide substances such as carbendazim, abamectin, cypermethrin, chlorpyrifos ethyl, mancozeb. At pulsed light intensity 8.4 J/cm2, weight attrition in the treated sample was lower than weight attrition in the untreated; meanwhile textural hardness, dry matter, ascorbic acid and total phenolic content remained higher in the treated sample compared to the untreated. The results reveals that the pulsed light technique should be applied as a promising decontamination approach for removal of the pathogen as well as pesticide residue with minor impact on physicochemical properties and phytochemical constituents.

Pulsed Light (PL) Treatments on Almond Kernels: Salmonella enteritidis Inactivation Kinetics and Infrared Thermography Insights

Abstract

Extending the shelf-life and ensuring microbiological safety of food products while preserving the nutritional properties are key aspects that must be addressed. Heat processing of food matrices has been the golden standard during the last decades, while certain non-thermal processing options have recently gained ground. In the present study, experimental pulsed light (PL) surface inactivation treatments of Salmonella enteritidis on almonds kernels are performed. The PL system is set to test different operative conditions, namely power (1000, 1250, and 1500 W) and frequency (1.8, 3.0, and 100.0 Hz) at different treatment times (from 5 to 250 s), which result in applied fluence doses in the 0–100 J·cm⁻² range. Additionally, temperature measurements are collected at each operative condition on the almond surface (using infrared (IR) thermography) and at the superficial layer of the almond (1-mm depth using a thermocouple). The observed PL inactivation kinetics are then modelled using four different models. The best goodness-of-fit is found for the two-parameter Weibull model (R² > 0.98 and RMSE < 0.33 for all cases). The maximum achieved log-CFU reductions are 6.02 for the 1.8-Hz system, 4.69 for the 3.0-Hz system, and 3.66 for 100.0-Hz system. The offset between the collected temperature readings by the two sensors is contrasted against the inactivation rate (following the two-parameter Weibull model). It was found that the highest inactivation rate corresponds approximately to the point where the infrared camera detects a slowdown in the surface heating.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11947-021-02725-9.

Efficacy of frontline chemical biocides and disinfection approaches for inactivating SARS-CoV-2 variants of concern that cause coronavirus disease with the emergence of opportunities for green eco-solutions

The emergence of severe acute respiratory disease (SARS-CoV-2) variants that cause coronavirus disease is of global concern. Severe acute respiratory disease variants of concern (VOC) exhibiting greater transmissibility, and potentially increased risk of hospitalization, severity and mortality, are attributed to molecular mutations in outer viral surface spike proteins. Thus, there is a reliance on using appropriate counter-disease measures, including non-pharmaceutical interventions and vaccination. The best evidence suggests that the use of frontline biocides effectively inactivate coronavirus similarly, including VOC, such as 202012/01, 501Y.V2 and P.1 that have rapidly replaced the wild-type variant in the United Kingdom, South Africa and Brazil, respectively. However, this review highlights that efficacy of VOC-disinfection will depend on the type of biocide and the parameters governing the activity. VOC are likely to be similar in size to the wild-type strain, thus implying that existing guidelines for use and re-use of face masks post disinfection remain relevant. Monitoring to avoid injudicious use of biocides during the coronavirus disease era is required as prolonged and excessive biocide usage may negatively impact our receiving environments; thus, highlighting the potential for alternative more environmental-friendly sustainable biocide solutions. Traditional biocides may promote cross-antimicrobial resistance to antibiotics in problematical bacteria. The existing filtration efficacy of face masks is likely to perform similarly for VOC due to similar viral size; however, advances in face mask manufacturing by way incorporating new anti-viral materials will potentially enhance their design and functionality for existing and potential future pandemics.

Disposable face masks and reusable face coverings as non-pharmaceutical interventions (NPIs) to prevent transmission of SARS-CoV-2 variants that cause coronavirus disease (COVID-19): Role of new sustainable NPI design innovations and predictive mathematical modelling

Best-published evidence supports the combined use of vaccines with non-pharmaceutical interventions (NPIs), to reduce the relative risk of contracting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that causes COVID-19; this will enable a safe transition to achieving herd immunity. Albeit complex, the strategic public health goal is to bundle NPIs to keep the basic reproduction number R₀ below one. However, validation of these NPIs is conducted using random clinical trials, which is challenging in a swiftly moving pandemic given the need for recruiting large participant cohort over a longitudinal analysis period. This review highlights emerging innovations for potentially improving the design, functionality and improved waste management of disposable face masks such as filtering facepiece (FFPs) respirators, medical masks, and reusable face coverings to help prevent COVID-19. It describes use of different mathematical models under varying scenarios to inform efficacy of single and combined use of NPIs as important counter-measures to break the cycle of COVID-19 infection including new SARS-CoV-2 variants. Demand for face masks during COVID-19 pandemic keeps increasing, especially for FFPs worn by medical workers. Collaborative and well-conducted randomised controlled trials across borders are required to generate robust data to inform common and consistent policies for COVID-19 and future pandemic planning and management; however, current use of systematic reviews of best available evidence can be considered to guide interim policies.

SARS-CoV-2 in the environment-Non-droplet spreading routes

The new coronavirus SARS-CoV-2, first identified in Wuhan (China) in December 2019, represents the same family as the Serve Acute Respiratory Syndrome Coronavirus-1 (SARS-CoV-1). These viruses spread mainly via the droplet route. However, during the pandemic of COVID-19 other reservoirs, i.e., water (surface and ground), sewage, garbage, or soil, should be considered. As the infectious SARS-CoV-2 particles are also present in human excretions, such a non-droplet transmission is also possible. A significant problem is the presence of SARS-CoV-2 in the hospital environment, including patients' rooms, medical equipment, everyday objects and the air. Relevant is selecting the type of equipment in the COVID-19 hospital wards on which the virus particles persist the shortest or do not remain infectious. Elimination of plastic objects/equipment from the environment of the infected person seems to be of great importance. It is particularly relevant in water reservoirs contaminated with raw discharges. Wastewater may contain coronaviruses and therefore there is a need for expanding Water-Based Epidemiology (WBE) studies to use obtained values as tool in determination of the actual percentage of the SARS-CoV-2 infected population in an area. It is of great importance to evaluate the available disinfection methods to control the spread of SARS-CoV-2 in the environment. Exposure of SARS-CoV-2 to 65-70% ethanol, 0.5% hydrogen peroxide, or 0.1% sodium hypochlorite has effectively eliminated the virus from the surfaces. Since there are many unanswered questions about the transmission of SARS-CoV-2, the research on this topic is still ongoing. This review aims to summarize current knowledge on the SARS-CoV-2 transmission and elucidate the viral survival in the environment, with particular emphasis on the possibility of non-droplet transmission.

Application of Novel Non-Thermal Physical Technologies to Degrade Mycotoxins

Mycotoxins cause adverse effects on human health. Therefore, it is of the utmost importance to confront them, particularly in agriculture and food systems. Non-thermal plasma, electron beam radiation, and pulsed light are possible novel non-thermal technologies offering promising results in degrading mycotoxins with potential for practical applications. In this paper, the available publications are reviewed-some of them report efficiency of more than 90%, sometimes almost 100%. The mechanisms of action, advantages, efficacy, limitations, and undesirable effects are reviewed and discussed. The first foretastes of plasma and electron beam application in the industry are in the developing stages, while pulsed light has not been employed in large-scale application yet.

Challenges, Strategies, and Recommendations for the Huge Surge in Plastic and Medical Waste during the Global COVID-19 Pandemic with Circular Economy Approach

After December 2019, the globe was affected by a new coronavirus (SARS-CoV-2) that causes severe respiratory illnesses, which is responsible for increasing environmental problem consequences related to the extra consumption of medical waste and single-use plastics (such as personal protective equipment (PPE) and packaging plastics). Although the consumption of these plastics protects our life during this crisis, it is pivotal to move toward plastic recycling processes and environmentally friendly and sustainable alternatives, like bio-based degradable plastics with a circular economy perspective. This review article collected scattered information and provided a future perspective on how worldwide COVID-19 disruption can perform as a catalyst to improve plastic and medical waste management. Additionally, this paper illustrates the most effective disinfection technologies for COVID-19 wastes, such as high/low heat technologies and chemical disinfection, and PPE reusing processes, including dry heat, vaporized hydrogen peroxide, ozone, and UV light during the outbreak. In this vein, medical waste treatment facilities must be more automatic, with a minimum of personnel involved. Moreover, some recent valid guidelines from different international organizations and countries, future outlook, and practical recommendations that could be effective during this epidemic or even in the post-pandemic world for plastic and medical waste management were provided. Ultimately, governments should improve their waste management because of the potential of pathogen transmission or increased plastic and medical waste generation and try to enhance the environmental knowledge of society. People also should revise their viewpoints on plastic consumption by elevating sustainable behaviors, abandoning old habits, and adjusting to novel ones.

Innovations and technology disruptions in the food sector within the COVID-19 pandemic and post-lockdown era

Background

COVID-19 pandemic has caused a global lockdown that has abruptly shut down core businesses and caused a worldwide recession. The forecast for a smooth transition for the agri-food and drink industry is, at best, alarming. Given that COVID-19 shutdown multiple core services (such as aviation, food services, supply chains, and export and import markets), there is an enormous deficiency in critical information to inform priority decision making for companies where this uncertainly is likely to impact negatively upon recovery.

Scope and approach

The current article investigates potential innovations within the era of the COVID-19 crisis after framing them within the four issues of the food sector (food safety, bioactive food compounds, food security, and sustainability) that are directly affected by the pandemic. The prospect of foreseen innovations to disrupt the food sector during lockdown periods and the post-COVID-19 era is also discussed.

Key findings and conclusions

Internet and Communication Technologies, blockchain in the food supply chain and other Industry 4.0 applications, as well as approaches that redefine the way we consume food (e.g., lab-grown meat, plant-based alternatives of meat, and valorization of a vast range of bioresources), are the innovations with the highest potential in the new era. There is also an equally pressing need to exploit social marketing to understand attitudes, perceptions, and barriers that influence the behavior change of consumers and the agri-food industry. Subsequently, this change will contribute to adapting to new norms forged by the COVID-19 pandemic, where there is a significant gap in knowledge for decision making.

Unlocking the surge in demand for personal and protective equipment (PPE) and improvised face coverings arising from coronavirus disease (COVID-19) pandemic - Implications for efficacy, re-use and sustainable waste management

Currently, there is no effective vaccine for tackling the ongoing COVID-19 pandemic caused by SARS-CoV-2 with the occurrence of repeat waves of infection frequently stretching hospital resources beyond capacity. Disease countermeasures rely upon preventing person-to-person transmission of SARS-CoV2 so as to protect front-line healthcare workers (HCWs). COVID-19 brings enormous challenges in terms of sustaining the supply chain for single-use-plastic personal and protective equipment (PPE). Post-COVID-19, the changes in medical practice will drive high demand for PPE. Important countermeasures for preventing COVID-19 transmission include mitigating potential high risk aerosol transmission in healthcare setting using medical PPE (such as filtering facepiece respirators (FFRs)) and the appropriate use of face coverings by the general public that carries a lower transmission risk. PPE reuse is a potential short term solution during COVID-19 pandemic where there is increased evidence for effective deployment of reprocessing methods such as vaporized hydrogen peroxide (30 to 35% VH2O2) used alone or combined with ozone, ultraviolet light at 254 nm (2000 mJ/cm²) and moist heat (60 °C at high humidity for 60 min). Barriers to PPE reuse include potentially trust and acceptance by HCWs. Efficacy of face coverings are influenced by the appropriate wearing to cover the nose and mouth, type of material used, number of layers, duration of wearing, and potentially superior use of ties over ear loops. Insertion of a nose clip into cloth coverings may help with maintaining fit. Use of 60 °C for 60 min (such as, use of domestic washing machine and spin dryer) has been advocated for face covering decontamination. Risk of virus infiltration in improvised face coverings is potentially increased by duration of wearing due to humidity, liquid diffusion and virus retention. Future sustained use of PPE will be influenced by the availability of recyclable PPE and by innovative biomedical waste management.

Unlocking challenges and opportunities presented by COVID-19 pandemic for cross-cutting disruption in agri-food and green deal innovations: Quo Vadis?

COVID-19 pandemic is on a trajectory to cause catastrophic global upheaval with the potential to alter geopolitical and socio-economic norms. Many countries are frantically responding with staggering financial stimulus recovery initiatives. This opinion-paper reviews challenges, opportunities, and potential solutions for the post-COVID-19 era that focuses on intensive sustaining of agri-food supply chain in tandem with meeting the high demand for new green deal innovation. For example, the development of wet peatland innovation, known as Paludiculture, can intensively sustain and blend agri-food and green innovations that will help support COVID-19 pandemic transitioning. The future looks bright for the creation of new sustainability multi-actor innovation hubs that will support, connect, and enable businesses to recover and pivot beyond the COVID-19 pandemic. The nexus between first 'Green Deal' initiative supporting 64 selected European Startups and SMEs (European Innovation Council) and 43 Irish Disruptive Technology projects are addressed in the context of cross-cutting developments and relevance to COVID-19. Candidate areas for future consideration will focus on climate action, digitization, manufacturing, and sustainable food production, security, and waste mitigation. Recommendations are also provided to facilitate community transitioning, training, enterprise, and employment to low carbon economy.

Food Ingredients and Active Compounds against the Coronavirus Disease (COVID-19) Pandemic: A Comprehensive Review

As media reports have noted, the COVID-19 pandemic has accelerated market mainstreaming of immune-boosting food bioactives, supplements, and nutraceuticals. However, most studies reporting on the potential of bioactives against COVID-19 transmission have been uploaded as preprints with little opportunity to revise content for benefit and impact. The current review discusses current best evidence and information underpinning the role of food ingredients and bioactive compounds in supporting immune functions in humans and animals, specifically in the prevention and treatment of COVID-19 disease. Up to now, some evidence from randomized population and clinical trials has suggested that vitamin D levels may be linked to COVID-19 transmission and severity. Numerous theoretical studies have pointed to polyphenols and particularly flavonoids as potential inhibitors of SARS-CoV-2 infection. There is also inconclusive evidence to support the future use of β-glucan to address COVID-19 due in part to variability in immune response arising from heterogeneity in polysaccharide branch and chain length for different sources and the absence of a standardized extraction method. To confirm the promising outcomes and hypotheses for bioactive compounds, more randomized and controlled clinical studies are needed. The results of such studies would have a profound effect on the prospects of food supplements and nutraceuticals as potential prophylaxis against COVID-19 and serve to help consumers to protect themselves during the post-lockdown recovery era.

Opportunities for the application of real-time bacterial cell analysis using flow cytometry for the advancement of sterilization microbiology

Medical devices provide critical care and diagnostic applications through patient contact. Sterility assurance level (SAL) may be defined as the probability of a single viable micro-organism occurring on an item after a sterilization process. Sterilization microbiology often relies upon using an overkill validation method where a 12-log reduction in recalcitrant bacterial endospore population occurs during the process that exploits conventional laboratory-based culture media for enumeration. This timely review explores key assumptions underpinning use of conventional culture-based methods in sterilization microbiology. Consideration is given to how such methods may limit the ability to fully appreciate the inactivation kinetics of a sterilization process such as vaporized hydrogen peroxide (VH2O2) sterilization, and consequently design efficient sterilization processes. Specific use of the real-time flow cytometry (FCM) is described by way of elucidating the practical relevance of these limitation factors with implications and opportunities for the sterilization industry discussed. Application of FCM to address these culture-based limitation factors will inform real-time kinetic inactivation modelling and unlock potential to embrace emerging opportunities for pharma, medical device and sterilization industries including potentially disruptive applications that may involve reduced usage of sterilant.