Categorization of nano-structured titanium dioxide according to physicochemical characteristics and pulmonary toxicity

Time‐course analysis of pulmonary inflammation induced by intratracheal instillation of nanosized crystalline silica particles in F344 rats

Crystalline silica is an important cause of serious pulmonary diseases, and its toxic potential is known to be associated with its surface electrical properties. However, in vivo data clarifying the relevance of silica's toxic potential, especially its long-term effects, remain insufficient. To investigate the contribution of physico-chemical property including surface potential on the hazard of nanocrystalline silica, we performed single intratracheal instillation testing using five different crystalline silicas in a rat model and assessed time-course changes in pulmonary inflammation, lung burden, and thoracic lymph node loads. Silica-nanoparticles were prepared from two commercial products (Min-U-Sil5 [MS5] and SIO07PB [SPB]) using three different pretreatments: centrifugation (C), grinding (G), and surface dissolving (D). The five types of silica particles-MS5, MS5_C, SPB_C, SPB_G, and SPB_D-were intratracheally instilled into male F344 rats at doses of 0 mg/kg (purified water), 0.22 mg/kg (SPB), and 0.67, 2, or 6 mg/kg (MS5). Bronchoalveolar lavage, a lung burden analysis, and histopathological examination were performed at 3, 28, and 91 days after instillation. Granuloma formation was present in MS5 group at 91 days after instillation, although granuloma formation was suppressed in MS5_C group, which had a smaller particle size. SPB_C induced severe and progressive inflammation and kinetic lung overload, whereas SPB_G and SPB_D induced only slight and transient acute inflammation. Our results support that in vivo toxic potential of nanosilica by intratracheal instillation may involve with surface electrical properties leading to prolonged effect and may not be dependent not only on surface properties but also on other physico-chemical properties.

Moroccan Bee Bread Improves Biochemical and Histological Changes of the Brain, Liver, and Kidneys Induced by Titanium Dioxide Nanoparticles

Titanium dioxide nanoparticles (TiO2) were used in various fields such as food industry, cosmetics, medicine, and agriculture. Despite the many advantages of nanotechnology, the adverse effects of nanoparticles are inevitable. The present study was conducted to evaluate the protective effect of bee bread on titanium dioxide (TiO2) nanoparticle toxicity. Male rats were randomly divided into four groups: Group 1 received daily by gavage (10 mL/kg bw) of distilled water, Group 2 received bee bread ethanolic extract (100 mg/kg bw), Group 3 received TiO2 (100 mg/kg bw) and distilled water (10 mL/kg bw), and Group 4 received TiO2 (100 mg/kg bw) and bee bread ethanolic extract (100 mg/kg bw). All treatments were given daily by gavage during 30 days. At the end of the experiment period, blood samples were collected to analyze fasting blood glucose, lipid profile (TC, TG, LDL-C, HDL-C, and VLDL-C), liver enzymes (AST, ALT, and LDH), total protein, urea, albumin, creatinine, sodium, potassium, and chloride ions. In addition, histological examinations of the kidneys, liver, and brain were investigated. The results showed that the subacute administration of TiO2 alone (100 mg/kg bw) had induced hyperglycemia (309 ± 5 mg/dL) and elevation of hepatic enzyme levels, accompanied by a change in both lipid profile and renal biomarkers as well as induced congestion and dilatation in the hepatic central vein and congestion in kidney and brain tissues. However, the cotreatment with bee bread extract restored these biochemical parameters and attenuated the deleterious effects of titanium nanoparticles on brain, liver, and kidney functions which could be due to its rich content on functional molecules. The findings of this paper could make an important contribution to the field of using bee bread as a detoxifying agent against titanium dioxide nanoparticles and other xenobiotics.

Time-course comparison of pulmonary inflammation induced by intratracheal instillation of four different nickel oxide nanoparticles in male Fischer rats

Occupational exposure to nickel oxide (NiO) is an important cause of respiratory tract cancer. Toxicity is known to be associated with the dissociated component, i.e. nickel (II) ions. To address the relationship between physicochemical properties, including solubility in artificial lysosomal fluid, of NiO and time-course changes in the pulmonary response, we conducted an intratracheal instillation study in male Fischer rats using four different well-characterized NiO products, US3352 (NiO A), NovaWireNi01 (NiO B), I small particle (NiO C), and 637130 (NiO D). The NiOs were suspended in purified water and instilled once intratracheally into male F344 rats (12 weeks old) at 0 (vehicle control), 0.67, 2, and 6 mg/kg body weight. The animals were euthanized on days 3, 28, or 91 after instillation, and blood analysis, bronchoalveolar lavage fluid (BALF) testing, and histopathological examination were performed. The most soluble product, NiO B, caused the most severe systemic toxicity, leading to a high mortality rate, but the response was transient and surviving animals recovered. The second-most-soluble material, NiO D, and the third, NiO A, caused evident pulmonary inflammation, and the responses persisted for at least 91 days with collagen proliferation. In contrast, NiO C induced barely detectable inflammation in the BALF examination, and no marked changes were noted on histopathology. These results indicate that the early phase toxic potential of NiO products, but not the persistence of pulmonary inflammation, is associated with their solubility.

Toxicity assessment of reduced graphene oxide and titanium dioxide nanomaterials on gram-positive and gram-negative bacteria under normal laboratory lighting condition

•

Bacterial growth curve deviates from its normal pattern after the exposure to nanoparticles.

•

Cell wall structure of Gram-positive and Gram-negative bacteria played the major factor contribute to its toxicity effect towards nanoparticles exposure.

•

Smaller particle had greater impact on the bacterial growth.

•

E. coli and B. subtilis cells suffered from morphological changes upon nanoparticles exposure.

Toxicity effect of reduced graphene oxide (rGO) and titanium dioxide (TiO₂) nanomaterials (NMs) on Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria was assessed. For both strains, study demonstrated that the toxicity was time and concentration dependent which led to reduction in growth rate and cell death. Upon NMs exposure, an instantaneous cell death in E. coli culture was observed. This is in contrast with B. subtilis, in which the culture growth remained in the log phase; however their growth rate constant, μg was reduced by ∼70%. The discrepancy between E. coli and B. subtilis was due to strain-specific response upon contact with NMs. TEM, SEM and EDX analysis revealed direct physical surface-surface interaction, as evidence from the adherence of NMs on the cell surface.

Mechanism of Action of TiO2: Recommendations to Reduce Uncertainties Related to Carcinogenic Potential

The Risk Assessment Committee of the European Chemicals Agency issued an opinion on classifying titanium dioxide (TiO₂) as a suspected human carcinogen upon inhalation. Recent animal studies indicate that TiO₂ may be carcinogenic through the oral route. There is considerable uncertainty on the carcinogenicity of TiO₂, which may be decreased if its mechanism of action becomes clearer. Here we consider adverse outcome pathways and present the available information on each of the key events (KEs). Inhalation exposure to TiO₂ can induce lung tumors in rats via a mechanism that is also applicable to other poorly soluble, low-toxicity particles. To reduce uncertainties regarding human relevance, we recommend gathering information on earlier KEs such as oxidative stress in humans. For oral exposure, insufficient information is available to conclude whether TiO₂ can induce intestinal tumors. An oral carcinogenicity study with well-characterized (food-grade) TiO₂ is needed, including an assessment of toxicokinetics and early KEs.

In Vitro Toxicity of TiO2:SiO2 Nanocomposites with Different Photocatalytic Properties

The enormous technological relevance of titanium dioxide (TiO2) nanoparticles (NPs) and the consequent concerns regarding potentially hazardous effects that exposure during production, use, and disposal can generate, encourage material scientists to develop and validate intrinsically safe design solution (safe-by-design). Under this perspective, the encapsulation in a silica dioxide (SiO2) matrix could be an effective strategy to improve TiO2 NPs safety, preserving photocatalytic and antibacterial properties. In this work, A549 cells were used to investigate the toxic effects of silica-encapsulated TiO2 having different ratios of TiO2 and SiO2 (1:1, 1:3, and 3:1). NPs were characterized by electron microscopy and dynamic light scattering, and cell viability, oxidative stress, morphological changes, and cell cycle alteration were evaluated. Resulting data demonstrated that NPs with lower content of SiO2 are able to induce cytotoxic effects, triggered by oxidative stress and resulting in cell necrosis and cell cycle alteration. The physicochemical properties of NPs are responsible for their toxicity. Particles with small size and high stability interact with pulmonary cells more effectively, and the different ratio among silica and titania plays a crucial role in the induced cytotoxicity. These results strengthen the need to take into account a safe(r)-by-design approach in the development of new nanomaterials for research and manufacturing.

What is the impact of surface modifications and particle size on commercial titanium dioxide particle samples? - A review of in vivo pulmonary and oral toxicity studies - Revised 11-6-2018

There is an ongoing discussion on the influence of surface-modifications on the toxicity of commercial particulate materials and how alterations in physical-chemical properties of surfaces impact toxicity. Titanium dioxide (TiO₂) is a poorly soluble particulate material of significant socioeconomic importance that largely exists as surface-modified particle-types in commerce. The observed toxicological effects of TiO₂ are primarily due to particle effects rather than substance chemistry, as such TiO₂ is commonly considered to be a poorly soluble low toxicity (PSLT) particle. This review provides an overview of the effect of surface modifications on the pulmonary and oral toxicity of commercial TiO₂ particles with emphasis on in vivo studies with appropriate controls, and where both surface modified and untreated materials are present in the same study. Published literature findings involving pulmonary and oral exposures to surface modified TiO₂ particles were reviewed and evaluated for quality and commercial relevance. Suitable publications involving animal studies were identified and summarized. Several studies were identified that have evaluated commercially-relevant surface-modified forms of titanium dioxide with appropriate data quality and with direct comparison to untreated counterparts. Hydrophilic inorganic surface modifications including silica, alumina/alumina hydroxide depositions have been tested along with common hydrophilic and hydrophobic-organic surface treatments. The results for both pigmentary and nanoscale materials demonstrate similar behaviour and indicate limited impact of particle size, surface chemistry, surface charge and surface wettability on observed pulmonary or oral toxicity effects. The low intrinsic toxicity of the TiO₂ base particle and evaluated surface modifications may account for the observed outcomes. A few published studies have drawn different conclusions; however, these were either not conducted using commercial TiO₂ samples (with surface coatings), had several confounding variables to investigate, or were carried out using mouse strains. The differences in experimental designs are described. The identified pulmonary and oral toxicity studies largely indicate that surface modifications and particle size alone have little or no impact on the lung toxicity of TiO₂ particles, following pulmonary exposures when all constituent materials are comprised of chemicals of low specific toxicity particles. In addition, based upon the results of 2 oral toxicity studies, one with surface treated TiO₂ particles (OECD 408) and one without surface treated (OECD 407) TiO₂ particles, there appears to have been no adverse impact on toxicity with the surface-coated material, as both studies produced no adverse effects at the very high doses tested.

Pulmonary impact of titanium dioxide nanorods: examination of nanorod-exposed rat lungs and human alveolar cells

BACKGROUND

Titanium dioxide nanoparticles have numerous applications, resulting in human exposure. Nonetheless, available toxicological and safety data are insufficient regarding aspherical particles, such as rod-shaped nanoparticles.

METHODS

In a combined in vitro-in vivo approach, cultured A549 lung alveolar adenocarcinoma cells were treated with approximately 15×65 nm TiO2 nanorod-containing medium, while young adult rats received the same substance by intratracheal instillation for 28 days in 5 and 18 mg/kg body-weight doses. Nanoparticle accumulation in the lungs and consequent oxidative stress, cell damage, and inflammation were assessed by biochemical and histopathological methods.

RESULTS

Titanium was detected in tissue samples by single-particle inductively coupled plasma mass spectrometry. Nanoparticles were visualized inside cultured A549 cells, within pulmonary macrophages, and in hilar lymph nodes of the rats. A549 cells showed dose-dependent oxidative stress and lethality, and the observed nanoparticle-laden endosomes suggested deranged lysosomal function and possible autophagy. Strongly elevated Ti levels were measured in the lungs of nanorod-treated rats and moderately elevated levels in the blood of the animals. Numerous cytokines, indicating acute and also chronic inflammation, were identified in the lung samples of TiO2-exposed rodents.

CONCLUSION

Several signs of cell and tissue damage were detected in both the cultured alveolar cells and in treated rats' lungs. Rod-shaped nanoparticulate TiO2 may consequently be more harmful than has generally been supposed. The occupational health risk suggested by the results calls for improved safety measures.

Kinetics and dissolution of intratracheally administered nickel oxide nanomaterials in rats

BACKGROUND

The toxicokinetics of nanomaterials are an important factor in toxicity, which may be affected by slow clearance and/or distribution in the body.

METHODS

Four types of nickel oxide (NiO) nanoparticles were single-administered intratracheally to male F344 rats at three doses of 0.67-6.0 mg/kg body weight. The rats were sacrificed under anesthesia and the lung, thoracic lymph nodes, bronchoalveolar lavage fluid, liver, and other organs were sampled for Ni burden measurement 3, 28, and 91 days post-administration; Ni excretion was measured 6 and 24 h after administration. Solubility of NiO nanoparticles was determined using artificial lysosomal fluid, artificial interstitial fluid, hydrogen peroxide solution, pure water, and saline. In addition, macrophage migration to trachea and phagosome-lysosome-fusion rate constants were estimated using pulmonary clearance and dissolution rate constants.

RESULTS

The wire-like NiO nanoparticles were 100% dissolved by 24 h when mixed with artificial lysosomal fluid (dissolution rate coefficient: 0.18/h); spherical NiO nanoparticles were 12% and 35% dissolved after 216 h when mixed with artificial lysosomal fluid (1.4 × 10^-3 and 4.9 × 10^-3/h). The largest irregular-shaped NiO nanoparticles hardly dissolved in any solution, including artificial lysosomal fluid (7.8 × 10^-5/h). Pulmonary clearance rate constants, estimated using a one-compartment model, were much higher for the NiO nanoparticles with a wire-shape (0.069-0.078/day) than for the spherical and irregular-shaped NiO nanoparticles (0-0.012/day). Pulmonary clearance rate constants of the largest irregular-shaped NiO nanoparticles showed an inverse correlation with dose. Translocation of NiO from the lungs to the thoracic lymph nodes increased in a time- and dose-dependent manner for three spherical and irregular-shaped NiO nanoparticles, but not for the wire-like NiO nanoparticles. Thirty-five percent of the wire-like NiO nanoparticles were excreted in the first 24 h after administration; excretion was 0.33-3.6% in that time frame for the spherical and irregular-shaped NiO nanoparticles.

CONCLUSION

These findings suggest that nanomaterial solubility differences can result in variations in their pulmonary clearance. Nanoparticles with moderate lysosomal solubility may induce persistent pulmonary inflammation.

Effects of dose volume and delivery device on bronchoalveolar lavage parameters of intratracheally administered nano-sized TiO2 in rats

The intratracheal (IT) test is useful for screening the pulmonary toxicity of inhaled materials, including nanomaterials. However, a standard procedure has not yet been authorized internationally, and the effects of different test parameters are unknown. To determine appropriate experimental conditions for the IT test, we intratracheally administered nano-sized TiO₂ to male F344 rats at 3.0 mg/kg body weight by using two delivery devices (gavage needle or microaerosolizer) and dose volumes of 0.5-3.0 mL/kg (gavage needle) or 0.5-2.0 mL/kg (microaerosolizer). We evaluated the pulmonary deposition and interlobar distribution of TiO₂ at both 30 min and 3 days after administration. In addition, the inflammatory components in bronchoalveolar lavage (BAL) fluid were measured 3 days after administration of TiO₂. At dose volumes of 0.5-2.0 mL/kg, the BAL values were comparable regardless of the device used. In addition, pulmonary TiO₂ burden and lobar concentration patterns were equivalent at all combinations of dose volume and delivery device. In conclusion, the acute pulmonary toxicity of nanomaterials can be assessed effectively by using an IT test in which the test agent is provided to rats at a dose volume of 0.5-2.0 mL/kg with either a gavage needle or microaerosolizer.