Application of magnetic nanoparticles for magnetic solid-phase extraction in preparing biological, environmental and food samples

Facile extraction and determination of organophosphorus pesticides using poly (8-hydroxyquinoline) functionalized magnetic multi-walled carbon nanotubes nanocomposite in water, fruits, and vegetables samples

This study presents a dispersive micro-solid phase extraction (D-μ-SPE) approach for extracting and determining of two organophosphorus pesticides (OPPs), including diazinon and chlorpyrifos as model analytes in various samples. For this purpose, we synthesized, characterized, and utilized magnetic multi-walled carbon nanotubes coated with poly 8-hydroxyquinoline (MWCNTs/Fe3O4@PHQ) as a novel sorbent. The impact of various parameters, including sorbent type, sample pH, sample volume, sorbent amount, desorption solvent (type and volume), extraction time, and ionic strength on the extraction efficiency was investigated and optimized. Following the extraction, the desorbed pesticides in acetone were analyzed using gas chromatography with an FID detector. Under the optimized experimental conditions, the proposed method showed excellent linearity in the range of 3-1000 µg/L, low detection limit (0.9-1.5 µg/L), good relative recoveries (86-101.5 %), and high precision (RSD < 6.5 %). Finally, the applicability of this method was evaluated by analyzing the target OPPs in a variety of real samples, and obtained satisfactory results.

Nitrophenols in the environment: An update on pretreatment and analysis techniques since 2017

Nitrophenols, a versatile intermediate, have been widely used in leather, medicine, chemical synthesis, and other fields. Because these components are widely applied, they can enter the environment through various routes, leading to many hazards and toxicities. There has been a recent surge in the development of simple, rapid, environmentally friendly, and effective techniques for determining these environmental pollutants. This review provides a comprehensive overview of the latest research progress on the pretreatment and analysis methods of nitrophenols since 2017, with a focus on environmental samples. Pretreatment methods include liquid-liquid extraction, solid-phase extraction, dispersive extraction, and microextraction methods. Analysis methods mainly include liquid chromatography-based methods, gas chromatography-based methods, supercritical fluid chromatography. In addition, this review also discusses and compares the advantages/disadvantages and development prospects of different pretreatment and analysis methods to provide a reference for further research.

Unravelling the potential of magnetic nanoparticles: a comprehensive review of design and applications in analytical chemistry

The study of nanoparticles has emerged as a prominent research field, offering a wide range of applications across various disciplines. With their unique physical and chemical properties within the size range of 1-100 nm, nanoparticles have garnered significant attention. Among them, magnetic nanoparticles (MNPs) exemplify promising super-magnetic characteristics, especially in the 10-20 nm size range, making them ideal for swift responses to applied magnetic fields. In this comprehensive review, we focus on MNPs suitable for analytical purposes. We investigate and classify them based on their analytical applications, synthesis routes, and overall utility, providing a detailed literature summary. By exploring a diverse range of MNPs, this review offers valuable insights into their potential application in various analytical scenarios.

Novel melanin-derived stationary phase for immobilized metal ion affinity chromatography in recombinant His-tagged protein purification

The matrix of the stationary phase is a crucial element in affinity chromatography for protein purification. Various materials, including polymer or magnetic materials, have been employed as the matrix in the purification of His-tagged protein. Here, for the first time, we utilized a combination of melanin and alginate, both natural polymer materials, to synthesize Ni-melanin/alginate (Ni-M/A) beads for His-tagged protein purification. We investigated the binding of His-tagged Mpro on the Ni-M/A beads, referred to as Ni-M/A-Mpro, and assessed the elution efficiency of Mpro from the beads. Our examination involved FTIR, EDS, XRD, SDS-PAGE, and Western blotting methods. FTIR spectra revealed notable changes in the stretching patterns and intensities of hydroxyl, amine, carbonyl, imine and amide chemical groups, when Mpro protein was present in the Ni-M/A sample. XRD spectra demonstrated the occurrence of two Nickel peaks at 35-40 deg and 40-45 deg in Ni-M/A, but only one nickel peak at 35-40 deg in Ni-M/A-Mpro, indicating the binding of Mpro on the Nickel ions. EDS analysis reported a decrease in the concentration of Nickel on the surface of Ni-M/A from 16% to 7% when Mpro protein was loaded into the stationary phase. Importantly, our data indicated that the purity of the His-tagged protein Mpro after purification reached 97% after just one-step purification using the Ni-M/A stationary phase. Moreover, the binding capacity of Ni-M/A for Mpro was approximately 5.2 mg/g with recovery efficiency of 40%. Our results suggested Ni-M/A as a highly potential solid phase for affinity chromatography in the purification of His-tagged protein.

Analysis and remediation of phthalates in aquatic matrices: current perspectives

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.

A miniaturized stir bar sorptive dispersive microextraction method for the determination of bisphenols in follicular fluid using a magnetic covalent organic framework

BACKGROUND

Bisphenols, particularly bisphenol A (BPA), are the primary monomers used as additives in the manufacturing of many consumer products. The exposure to these compounds is related to endocrine-disrupting and reproductive effects, among others. For this reason, the development of analytical methods for their determination in biological matrixes is needed to monitor the population exposure to these compounds. Their quantification at ovarian level (i.e., follicular fluid) is interesting for the assessment of the bisphenol content to draw conclusions about infertility problems. However, the background does not meet all requirements by focusing mainly on BPA.

RESULTS

In this work, a miniaturized stir bar sorptive dispersive microextraction (mSBSDME) approach has been developed for the determination of BPA and eight analogues in follicular fluid. In the proposed method, the sample is previously cleaned-up using a zirconia-based solid-phase extraction cartridge, removing proteins and phospholipids, and then subjected to the mSBSDME for the preconcentration of the analytes. For this purpose, a magnetic covalent organic framework was used as sorbent. A Plackett-Burman design was applied to select the significant variables affecting the mSBSDME. Afterwards, the only significant variable (i.e., sorbent amount) was optimized. Under the optimized conditions, the proposed method was properly validated, and satisfactory analytical parameters in terms of linearity (up to 50 ng mL-1), enrichment factors (8.5-14.3), limits of detection in the low ng mL-1 range, and precision (relative standard deviations below 11.5 %) were obtained. Finally, the method was successfully applied to five samples, detecting BPA and other two analogues.

SIGNIFICANCE

This method expands the potential applicability of the mSBSDME to other low-availability complex matrixes, which would otherwise be difficult to analyze. Moreover, it offers a valuable tool for monitoring the female population's exposure to bisphenols with the final aim of evaluating if infertility problems of women might be associated to the exposure to these highly endocrine disrupting compounds.

The application progress of magnetic solid-phase extraction for heavy metal analysis in food: a mini review

The emerging sample pretreatment technique of magnetic solid-phase extraction (MSPE) has drawn the attention of researchers owing to its advantages of less reagent consumption, fast separation/enrichment process, high adsorption capacity, and simple operation. This paper presents a review of synthesis techniques, classification, and analysis procedures for MSPE in the detection of heavy metals in food. Magnetic adsorbents derived from silica, metal oxides, carbon, polymers, etc., are applied for the detection of heavy metals in food. Then, the recent development of the technology of MSPE for the analysis of heavy metal extraction in food is summarized in detail. Finally, the future outlook for the improvement of MSPE is also discussed.

Mycotoxins-Imprinted Polymers: A State-of-the-Art Review

Mycotoxins are toxic metabolites of molds which can contaminate food and beverages. Because of their acute and chronic toxicity, they can have harmful effects when ingested or inhaled, posing severe risks to human health. Contemporary analytical methods have the sensitivity required for contamination detection and quantification, but the direct application of these methods on real samples is not straightforward because of matrix complexity, and clean-up and preconcentration steps are needed, more and more requiring the application of highly selective solid-phase extraction materials. Molecularly imprinted polymers (MIPs) are artificial receptors mimicking the natural antibodies that are increasingly being used as a solid phase in extraction methods where selectivity towards target analytes is mandatory. In this review, the state-of-the-art about molecularly imprinted polymers as solid-phase extraction materials in mycotoxin contamination analysis will be discussed, with particular attention paid to the use of mimic molecules in the synthesis of mycotoxin-imprinted materials, to the application of these materials to food real samples, and to the development of advanced extraction methods involving molecular imprinting technology.

Self-assembled Fe3O4-NH2 @g-C3N4 composite for magnetic solid-phase extraction of benzophenones in sea water and lake water coupled with LC-MS/MS determination

Magnetic solid-phase extraction (MSPE) was developed based on a well-designed Fe3O4-NH2 @g-C3N4 nanocomposite as sorbent for a mixture of six benzophenones (BPs) in environmental water samples. The composite fabricated via in-situ self-assembled g-C3N4 shell with homogeneous polymerization of cyanuric chloride and cyanuric acid on Fe3O4-NH2 core. While high adsorption capacity was derived from g-C3N4 via hydrophobic, π-π and hydrogen bonding interactions to the targets, the fast magnetic separation was realized with Fe3O4 core for less solvent consumption. In combination with LC-MS/MS, the Fe3O4-NH2 @g-C3N4 sorbent minimized the interfering components, reduced the matrix effects, and provided the enrichment factors of 121-150 for six BPs with relative standard deviations ≤ 9.7% even after 20 times extraction-desorption cycles. The present method gave the detection limits of 0.3-2.5 ng/L for six BPs with the linear ranges of 1.0-2000 ng/L, and the recoveries of 84.6%-104% in sea water and 86.2%-107% in lake water samples. Thus, the Fe3O4-NH2 @g-C3N4-based MSPE coupled with LC-MS/MS method provided a convenient, efficient, and reliable alternative to monitor trace BPs in environmental water samples.

A novel removal of Ni2+ ions from water solutions using dispersive solid-phase extraction method with nano Fe3O4/chitosan-acrylamide hydrogel

The effluent release containing heavy metals as Ni2+ ions has drastic risks to both the natural environment and human health. In this research, the nano Fe3O4/chitosan-acrylamide hydrogel was prepared as a novel nano sorbent for dispersive solid-phase extraction of Ni2+ ions and applied to the water sample solution. The pH, amount and type of elution solvent, the extraction time, etc. were optimized to improve the efficiency of the proposed method. Analytical parameters such as concentration factor and relative standard deviation (%) were achieved as 33.3 and 1.8%, respectively. The capacity in equilibrium sorption was calculated at 22.54 mg g-1. Furthermore, to estimate the adsorption mode, Freundlich, Langmuir, and Temkin models were fitted with experimental isotherm data. Besides, to check the basic process of the metal adsorption mechanism, pseudo-first-order, pseudo-second-order, and Roginsky-Zeldovich models were investigated and the results were fitted with the pseudo-second-order model. The value of change in entropy (⊿S) obtained is -65.24 (J(mol K)-1). Negative values of change in enthalpy, ⊿H in (kJ mol-1) is -24.45 (kJ mol-1) which indicates both physical and chemical adsorptions involved in the process of adsorption. Finally, the nano Fe3O4/chitosan-acrylamide hydrogel exhibited high performance to remove the Ni2+ ions from water sample solution.

Magnetic solid phase extraction coupled to HPLC-UV for highly sensitive analysis of mono-hydroxy polycyclic aromatic hydrocarbons in urine

BACKGROUND

As a common pollutant, the carcinogenic properties of polycyclic aromatic hydrocarbons have garnered considerable attention. Trace metabolites of polycyclic aromatic hydrocarbons can be detected in urine as a non-invasively approach to monitor the exposure level. Nonetheless, the urine samples have the disadvantages of being large in volume and containing numerous impurities. Given the growing demand to study metabolites with low abundance and potential biomarkers, there is a pressing need for a preconcentration and high-throughput technique for effectively handling complex liquid samples.

RESULTS

Polystyrene-coated magnetic nanoparticles were used to establish a novel magnetic extraction method for monohydroxy polycyclic aromatic hydrocarbons in urine samples. Polystyrene magnetic nanoparticles are an ideal absorbent for solid-phase extraction. After the material was mixed with the sample and adsorbed the target analyte, the analytes on the material were eluted and quantified using high-performance liquid chromatography. Influencing factors were optimized, and the proposed method achieved desirable sensitivity in analyzing low-abundance metabolites in large volumes of complex urine samples. The recoveries of intra-day and inter-day were 78.0-118.0 % and 81.0 %-115.0 %, respectively. The intra-day and inter-day reproducibility were less than 4.5 % and 8.6 %, respectively. The limits of detection were in the range of 0.009-0.041 ng mL-1, and the limits of quantification were in the range of 0.030-0.135 ng mL-1.

SIGNIFICANCE AND NOVELTY

The application of reusable polystyrene-coated magnetic solid-phase nanoparticles as adsorbents makes the extraction of monohydroxy polycyclic aromatic hydrocarbons from urine samples economical and environmentally benign. The proposed method is simple, sensitive, and efficient compared to existing techniques. The nanoparticles are easy to prepare, showing potential for rapid screening of complex bulk bio-samples in batches with high efficiency and low budget.

Magnetic Persimmon Leaf Composite: Preparation and Application in Magnetic Solid-Phase Extraction of Pesticides in Water Samples

In recent years, the utilization of biomass materials for the removal and detection of water pollutants has garnered considerable attention. This study introduces, for the first time, the preparation of Fe3O4/persimmon leaf magnetic biomass composites. The magnetic composites were employed in a magnetic solid-phase extraction method, coupled with gas chromatography-electron capture detection (GC-ECD), for the analysis of four pesticides (trifluralin, triadimefon, permethrin, and fenvalerate) in environmental water samples. The innovative magnetic persimmon leaf composites were synthesized by in situ generation of Fe3O4 nanoparticles through coprecipitation and loaded onto persimmon leaves. These composites exhibit superparamagnetism with a saturation magnetization of 12.8 emu g-1, facilitating rapid phase separation using a magnetic field and reducing the extraction time to 10 min. Desorption can be achieved within 30 s by aspirating 20 times, eliminating the need for time-consuming and labor-intensive experimental steps like filtration and centrifugation. The specific surface area of the magnetic composite adsorbent increased from 1.3279 m2 g-1 for the original persimmon leaf to 5.4688 m2 g-1. The abundant hydroxyl and carboxyl groups on the composites provide ample adsorption sites, resulting in adsorption capacities ranging from 55.056 mg g-1 to 73.095 mg g-1 for the studied pesticides. The composites exhibited extraction recoveries ranging from 80% to 90% for the studied pesticides. Compared to certain previously reported MSPE methods, this approach achieves equivalent or higher extraction recoveries in a shorter operation time, demonstrating enhanced efficiency and convenience. Good linearity of the target analytes was obtained within the range of 0.75-1500 μg L-1, with a determination of coefficient (R2) greater than 0.999. These findings contribute to the use of magnetic persimmon leaf biomass materials as effective and environmentally friendly adsorbents for pollutant determination in water samples.

A simple microwave-assisted synthesis of cobalt ferrite nanoparticles and its application for the determination of lead ions in rooibos (Aspalathus linearis) tea

In this study, a magnetic sorbent assisted dispersive solid phase extraction (DSPE) method was used to preconcentrate lead ions from rooibos tea samples for determination by slotted quartz tube-flame atomic absorption spectrometry (SQT-FAAS). Cobalt ferrite magnetic nanoparticles (CoFe2O4 MNPs) were synthesized by microwave assisted digestion. Limits of detection and quantification were calculated as 5.3 and 17.6 µg/L, respectively, in a linear dynamic range of 20-800 µg/L. The enhancement factor of the developed method was found to be 80-folds when compared to the detection limit of the regular FAAS system. The percent recoveries obtained for rooibos tea samples spiked at different concentrations were in the range of 77 - 125%, with high repeatability as indicated by low standard deviations. The findings of the study demonstrated that the CoFe2O4 MNPs-based extraction method is a straightforward, fast, affordable, safe, and eco-friendly approach to qualifying/quantifying lead with high precision in the selected beverage sample.

Biogenic synthesis of novel nanomaterials and their applications

Despite the many benefits derived from the unique features and practicality of nanoparticles, the release of their toxic by-products or products from the synthesis stage into the environment could negatively impact natural resources and organisms. The physical and chemical methods for nanoparticle synthesis involve high energy consumption and the use of hazardous chemicals, respectively, going against the principles of green chemistry. Biological methods of synthesis that rely on extracts from a broad range of natural plants, and microorganisms, such as fungi, bacteria, algae, and yeast, have emerged as viable alternatives to the physical and chemical methods. Nanoparticles synthesized through biogenic pathways are particularly useful for biological applications that have high concerns about contamination. Herein, we review the physical and chemical methods of nanoparticle synthesis and present a detailed overview of the biogenic methods used for the synthesis of different nanoparticles. The major points discussed in this study are the following: (1) the fundamentals of the physical and chemical methods of nanoparticle syntheses, (2) the use of different biological precursors (microorganisms and plant extracts) to synthesize gold, silver, selenium, iron, and other metal nanoparticles, and (3) the applications of biogenic nanoparticles in diverse fields of study, including the environment, health, material science, and analytical chemistry.

Determination of bioactive flavonoids using β-cyclodextrin combined with chitosan-modified magnetic nanoparticles

To accurately determine flavonoids (rutin, quercetin or kaempferol), it is necessary to extract them from complex matrices. The ultrasound-assisted magnetic dispersion microsolid phase extraction technique has been predominantly used for separation and enrichment of the target analytes. The combination of magnetic chitosan nanoparticles and a deep eutectic supramolecular solvent (DESP) is likely to enhance the efficiency of flavonoid extraction from food. In this study, adsorbents were prepared by modifying chitosan with magnetic nanoparticles, and the eluent was a DESP derived from β-cyclodextrin and an organic acid. The successful preparation of these materials was confirmed by FTIR, XRD, FE-SEM and 1H NMR. The extraction recovery rates exceeded 93 %, with limits of detection and quantitation ranging from 0.9 to 2.4 μg/L and 2.7 to 7.2 μg/L, respectively, and the flavonoid clearance rates for ABTS and DPPH radicals reached 100 %. Therefore, the integration of magnetic chitosan nanoparticles with the DESP provides a new and efficient method for the extraction of flavonoids while also presenting a potential application of the DESP in separations.

Silver ion-imprinted magnetic adsorbent hyphenated to single particle-ICP-MS for separation and analysis of dissolved silver and silver nanoparticles in antibacterial gel extracts

BACKGROUND

Silver nanoparticles (Ag NPs) are extensively used in various applications, but their reactivity leads to oxidative dissolution into Ag(I). When dealing with real samples involving Ag NPs, it is inevitable to encounter situations where both Ag NPs and Ag(I) coexist. Single particle-inductively coupled plasma mass spectrometry (SP-ICP-MS) is a valuable technique for nanoparticle size characterization. However, the presence of coexisting dissolved ions strongly interferes with the accuracy of particle size analysis using SP-ICP-MS. Therefore, it is crucial to develop a reliable separation analysis method to accurately measure both Ag NPs and Ag(I).

RESULTS

In this study, we synthesized a silver ion-imprinted magnetic adsorbent with high adsorption capacity (149 mg g-1) and rapid adsorption kinetics (30 min) at both μg L-1 and mg L-1 concentration. The adsorbent selectively adsorbs Ag(I) at pH 7 while hardly adsorbing Ag NPs. It is reusable for more than 5 cycles after regeneration. Using this magnetic adsorbent prior to SP-ICP-MS, we accurately determined the sizes of standard Ag NPs in agreement with the size determined by transmission electron microscopy. The detection limit of particle size and number concentrations of Ag NPs was 12.6 nm and 6.3 × 105 particles L-1. Moreover, we successfully applied the developed method to analyze Ag(I) and Ag NPs in antibacterial gel extracts and validated its accuracy through acid digestion-ICP-MS, TEM, and spiking experiments.

SIGNIFICANCE AND NOVELTY

Direct SP-ICP-MS analysis in the presence of Ag(I) led to a high baseline, obscuring signals from smaller Ag NPs. Our method of selectively removing Ag(I) substantially improves the accuracy of Ag NPs detection via SP-ICP-MS in the antibacterial gel extracts (e.g. from 48.26 to 35.67 nm). Compared to other approaches used in SP-ICP-MS, our method has a higher adsorption capacity, allowing for better tolerance of coexisting Ag(I).

State of the art on the separation and purification of proteins by magnetic nanoparticles

The need for excellent, affordable, rapid, reusable and biocompatible protein purification techniques is justified based on the roles of proteins as key biomacromolecules. Magnetic nanomaterials nowadays have become the subject of discussion in proteomics, drug delivery, and gene sensing due to their various abilities including rapid separation, superparamagnetism, and biocompatibility. These nanomaterials also referred to as magnetic nanoparticles (MNPs) serve as excellent options for traditional protein separation and analytical methods because they have a larger surface area per volume. From ionic metals to carbon-based materials, MNPs are easily functionalized by modifying their surface to precisely recognize and bind proteins. This review excavates state-of-the-art MNPs and their functionalizing agents, as efficient protein separation and purification techniques, including ionic metals, polymers, biomolecules, antibodies, and graphene. The MNPs could be reused and efficaciously manipulated with these nanomaterials leading to highly improved efficiency, adsorption, desorption, and purity rate. We also discuss the binding and selectivity parameters of the MNPs, as well as their future outlook. It is concluded that parameters like charge, size, core-shell, lipophilicity, lipophobicity, and surface energy of the MNPs are crucial when considering protein selectivity, chelation, separation, and purity.

Determination of catechol in water with deep eutectic supramolecular solvents-assisted magnetic κ-carrageenan nanoparticles

A combination of magnetic κ-carrageenan nanoparticles and deep eutectic supramolecular solvents used for extraction of catechol from water was evaluated by the magnetic dispersion solid phase extraction method. The magnetic κ-carrageenan nanoparticles (KC@Fe3O4MNPs) and the deep eutectic supramolecular solvent (DESP) were characterised by 1H NMR, FT-IR, XRD, SEM, VSM, TG, and BET. The adsorption kinetics, adsorption isothermal model, adsorption thermodynamics and effects of pH and salt concentration were investigated. Additionally, the factors used in the desorption process, such as the type, dosage, concentration and time, were analysed. Under the optimised conditions, the analytes were linear over the range 5-5000 ng mL-1, with a correlation coefficient greater than 0.999 and detection and quantitation limits of 1.6 and 4.7 ng mL-1, respectively. The procedure was successfully applied to determinations of the analytes of interest in spiked water samples with relative average recoveries ranging from 94.3% to 101.5%. These results indicated that the combination of functionalized magnetic nanoparticles and DESP had high specificity and extraction efficiency for catechol and will be a feasible alternative to conventional analyses of organic phenolic pollutants in water.

Sponge-nested polymer monoliths: Versatile materials for the solid-phase extraction of bisphenols

Polymer monoliths are promising materials for sample preparation due to their high porosity, pH stability, and simple preparation. The use of melamine formaldehyde foams has been reported as an effective support to prepare highly robust silica and polymer monoliths. Herein, divinylbenzene monoliths based on a 50:50 (%, w/w) crosslinker/porogen ratio have been nested within a melamine-formaldehyde sponge, resulting in monoliths with a surface area higher than 400 m2 /g. The extraction performance of these monoliths was evaluated for the extraction of endocrine-disrupting bisphenols from aqueous solutions. We evaluated for the first time the versatility of sponge-nested polymer monoliths by comparing three different extraction modes (vortex mixing, magnetic stirring, and orbital shaking). Vortex mixing showed a comparable recovery of bisphenols (39%-81%) in a shorter extraction time (30 min, instead of 2 h). In addition, the robustness of the sponge-nested polymer monoliths was demonstrated for the first time by reshaping a larger monolithic cube (0.125 cm3 ) into four smaller pieces (4 × 0.03125 cm3 ) leading to a 16%-21% increase in extraction efficiency. This effect was attributed to an increase in the effective contact area with the sample, obtaining a higher analyte extraction capacity.

A review of bioanalytical applications of microextraction techniques combined with derivatization

Microextraction techniques have attracted the attention of many researchers working in the field of bioanalysis due to their unique advantages, mainly in downsizing the scale of sample preparation steps. In parallel, analytical derivatization offers a powerful combination in terms of additional sensitivity, selectivity and compatibility with modern separation techniques. The aim of this review is to discuss the most recent advances in bioanalytical sample preparation based on the combination of microextraction and analytical derivatization. Both innovative fundamental reports and analyte-targeted applications are included and discussed. Dispersive liquid-liquid extraction and solid-phase microextraction are the most common techniques that typically combined with derivatization, while the development of novel and greener protocols is receiving substantial consideration in the field of analytical chemistry.

Ultra-High Adsorption Capacity of Core-Shell-Derived Magnetic Zeolite Imidazolate Framework-67 as Adsorbent for Selective Extraction of Theophylline

A core-shell-derived structural magnetic zeolite imidazolate framework-67 (Fe₃O₄-COOH@ZIF-67) nanocomposite was fabricated through a single-step coating of zeolite imidazolate framework-67 on glutaric anhydride-functionalized Fe₃O₄ nanosphere for the magnetic solid-phase extraction (MSPE) of theophylline (TP). The Fe₃O₄-COOH@ZIF-67 nanocomposite was characterized through scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, Zeta potential analysis, X-ray diffraction, Brunauer-Emmett-Teller, and vibrating sample magnetometer. The material has a high specific surface area and good magnetism, which maintains the regular dodecahedron structure of ZIF-67 without being destroyed by the addition of Fe₃O₄-COOH nanospheres. The Fe₃O₄-COOH@ZIF-67 can rapidly adsorb TP mainly through the strong coordination interaction between undercoordinated Co²⁺ on ZIF-67 and -NH from imidazole of TP. The adsorption and desorption conditions, such as the amount of adsorbent, adsorption time, pH value, and elution solvent, were optimized. The kinetics of TP adsorption on Fe₃O₄-COOH@ZIF-67 was found to follow pseudo-second-order kinetics. The Langmuir model fits the adsorption data well and the maximum adsorption capacity is 1764 mg/g. Finally, the developed MSPE-HPLC method was applied in the enrichment and analysis of TP in four tea samples and rabbit plasma. TP was not detected in oolong tea and rabbit plasma, and its contents in jasmine tea, black tea, and green tea are 5.80, 4.31, and 1.53 μg/g, respectively. The recoveries of spiked samples are between 74.41% and 86.07% with RSD in the range of 0.81-3.83%. The adsorption performance of Fe₃O₄-COOH@ZIF-67 nanocomposite was nearly unchanged after being stored at room temperature for at least 80 days and two consecutive adsorption-desorption cycles. The results demonstrate that Fe₃O₄-COOH@ZIF-67 nanocomposite is a promising magnetic adsorbent for the preconcentration of TP in complex samples.

Research progress on the magnetite nanoparticles in the fields of water pollution control and detection

Magnetite nanoparticles (MNPs) have shown increasing application in the fields of water pollution control and detection due to their perfect combination of interfacial functionalities and physicochemical properties, such as surface interface adsorption, (synergistic) reduction, catalytic oxidation, and electrical chemistry. This review presents the research advances in the synthesis and modification methods of MNPs in recent years, systematically summarizes the performances of MNPs and their modified materials in terms of three technical systems, including single decontamination system, coupled reaction system, and electrochemical system. In addition, the progress of the key roles played by MNPs in adsorption, reduction, catalytic oxidative degradation and their coupling with zero-valent iron for the reduction of pollutants are described. Moreover, the application prospect of MNPs-based electrochemical working electrodes for detecting micro-pollutants in water were also discussed in detail. This review addresses that the construction of MNPs-based systems for water pollution control and detection should be adapted to the natures of the target pollutants in water. Finally, the following research directions of MNPs and their remaining challenges are outlooked. In general, this review will inspire MNPs researchers in different fields for effective control and detection of a variety of contaminants in water.

Development of magnetic dispersive micro-solid phase extraction of four phenolic compounds from food samples based on magnetic chitosan nanoparticles and a deep eutectic supramolecular solvent

A magnetic dispersive micro-solid phase extraction technique (CS@Fe₃O₄-MD-μSPE-DESP) based on magnetic chitosan nanoparticles and a deep eutectic supramolecular solvent was developed and applied to determinations of four phenolic compounds in food samples. To prevent environmental pollution and the introduction of toxic substances, deep eutectic supramolecular solvents (DESPs), which exhibited greater desorption capacities than conventional organic solvents and deep eutectic solvents, were used as novel green eluents for the first time. Some important parameters were screened by the Plackett-Burman method and then further optimized with response surface methodology (RSM). Under the optimal conditions, the proposed method showed excellent methodological indices with linearity over the range 0.1-200.0 µg·mL^-1, R² > 0.9988, extraction recoveries above 94.8 %, and precision (RSD%) below 2.9 %. The established method finishes the process of adsorption and desorption in approximately 3 min and enhances the efficiency for determination of phenolic compounds.

Rapid and quantitative determination of deoxynivalenol in cereal through the combination of magnetic solid-phase extraction and optical fiber-based homogeneous chemiluminescence immunosensor

An integrated strategy for the rapid and sensitive detection of deoxynivalenol in cereals was developed by combining Fe₃O₄ magnetic nanoparticle-modified metal organic framework-5-based magnetic solid-phase extraction and the optical fiber-based homogeneous chemiluminescence immunosensor. The hybrid magnetic material was prepared and characterized, exhibiting good enrichment capacity up to 1.68 mg/g. The competitive immunoassay-based homogeneous chemiluminescence immunosensor enabled washing-free and high-sensitivity detection of deoxynivalenol. Under optimized conditions, this immunosensor could detect deoxynivalenol as low as 46.7 pg/mL with a quantitatively linear range of 0.1 to 1000 ng/mL. The recoveries of this integrated detection strategy in rice, corn, and wheat ranged from 80.0 % to 118.2 %, 91.1 % to 116.7 %, and 80.0 % to 91.5 %, respectively, with a relative standard deviation that did not exceed 9.11 %. More importantly, it shows great consistency with the high-performance liquid chromatography-mass spectrometry in blind sample analysis. This integrated detection strategy provides a convenient approach for mycotoxins screening in cereals.

Application of Recently used Green Solvents in Sample Preparation Techniques: A Comprehensive Review of Existing Trends, Challenges, and Future Opportunities

Green solvents (GSs) has gained significant attention in recent years due to their potential as safer and more sustainable alternatives to traditional organic solvents. Solvents are used in a wide range of applications, from industrial processes to everyday products. Solvent emissions and losses can have a significant impact on the environment and human health, which is why many initiatives are being undertaken to get rid of or switch to eco-friendly alternatives. A key area of green chemistry that led to the concept of "green" solvents is the development of alternative solvents that are less toxic and more environmentally friendly than traditional organic solvents. The advantages of using green solvents over conventional ones are their environmental friendliness, biocompatibility, biodegradability, and simplicity of preparation. Different sample preparation techniques have successfully utilized green solvents to offer a sustainable separation media for the extraction of a variety of inorganic and organic compounds which are crucial for research in environmental samples. Recent developments in green analytical chemistry (GAC) have focused on how to prepare and use samples using environmentally sustainable solvents. The current study covers the advance and currently used green solvents with an emphasis on environmentally friendly sample preparation methods. This review aims to briefly summarize the current state of knowledge about the use of green solvents particularly ionic liquids, deep eutectic solvents and switchable solvents (SSs) with the perspective of GAC in sample preparation methods.

Utilization of Waste Biomaterial as an Efficient and Eco-Friendly Adsorbent for Solid-Phase Extraction of Pantoprazole Contaminants in Wastewater

The objective of this analysis is to establish the potential of biodegradable agro-industrial waste materials as biosorbents in the solid-phase extraction (SPE) technique for sample preparation. In this regard, waste coffee husk (CH) powder was collected, washed, treated chemically, characterized, and applied as an SPE adsorbent to extract pantoprazole from the wastewater samples. Sample detection was accomplished using the UPLC-MS/MS system. The positive mode of electrospray ionization was exploited for the ionization of the sample, and quantification of the target analyte was performed by the multiple reaction monitoring modes. The precursor to product ion transition of 384.02→1380.05 and 384.02→200.05 was used as qualifiers and quantifiers, respectively. Optimization of the particle size, adsorbent dose, and contact time were evaluated to select the best combination of features. The efficiency and regeneration capability of the CH were compared with respect to a commercially available silica-based C18 SPE adsorbent, and it was found that CH possessed comparable (~50%) extraction, as well as regeneration capacity (~95%). The developed biosorbent was applied in a wastewater sample spiked with the target analyte and recovery studies were performed, which found a range of 93.0 to 102.0% with a %RSD of 3.72 to 12.7%. Thus, CH can be exploited as a ‘greener’ replacement for the commercially available adsorbents for the extraction/retention of active pharmaceutical ingredients present in water/wastewater samples.

Digital Magnetic Detection of Biomolecular Interactions with Single Nanoparticles

Biomolecular interactions compose a fundamental element of all life forms and are the biological basis of many biomedical assays. However, current methods for detecting biomolecular interactions have limitations in sensitivity and specificity. Here, using nitrogen-vacancy centers in diamond as quantum sensors, we demonstrate digital magnetic detection of biomolecular interactions with single magnetic nanoparticles (MNPs). We first developed a single-particle magnetic imaging (SiPMI) method on 100 nm-sized MNPs with negligible magnetic background, high signal stability, and accurate quantification. The single-particle method was performed on biotin-streptavidin interactions and DNA-DNA interactions in which a single-base mismatch was specifically differentiated. Subsequently, SARS-CoV-2-related antibodies and nucleic acids were examined by a digital immunomagnetic assay derived from SiPMI. In addition, a magnetic separation process improved the detection sensitivity and dynamic range by more than 3 orders of magnitude and also the specificity. This digital magnetic platform is applicable to extensive biomolecular interaction studies and ultrasensitive biomedical assays.

Magnetic solid-phase extraction of warfarin and gemfibrozil in biological samples using polydopamine-coated magnetic nanoparticles via core-shell nanostructure

Herein, polydopamine-coated Fe₃ O₄ spheres were synthesized using a very simple, easy, cost-effective, efficient, and fast method. First, magnetic nanoparticles (Fe₃ O₄ ) were synthesized and were followed by accommodating polydopamine on the surface of the prepared Fe₃ O₄ . The prepared polydopamine-coated Fe₃ O₄ spheres were utilized as a sorbent in magnetic solid phase extraction of gemfibrozil and warfarin (as the model analytes). The extracted model analytes were desorbed by a suitable organic solvent and were analyzed by high-performance liquid chromatography. Under optimized condition, the linearity of the method was in the range of 0.1-200.0 μg/L for the selected analytes in water. The limits of detection were calculated to be in the range of 0.026-0.055 μg/L for warfarin and gemfibrozil, respectively. The limits of quantification were calculated to be in the range of 0.089-0.185 μg/L. The inter-day and intra-day relative standard deviations were determined to be in the range of 1.4%-3.3% in three concentrations in order to calculate the method precision. Furthermore, the enrichment factors were found to be 78 and 81 for warfarin and gemfibrozil, respectively. Moreover, the calculated absolute recoveries were between 78% and 81%. The obtained recoveries indicated that the method was useful and applicable in complicated real samples.

Preparation and Application of Molecularly Imprinted Polymers for Flavonoids: Review and Perspective

The separation and detection of flavonoids from various natural products have attracted increasing attention in the field of natural product research and development. Depending on the high specificity of molecularly imprinted polymers (MIPs), MIPs are proposed as efficient adsorbents for the selective extraction and separation of flavonoids from complex samples. At present, a comprehensive review article to summarize the separation and purification of flavonoids using molecular imprinting, and the employment of MIP-based sensors for the detection of flavonoids is still lacking. Here, we reviewed the general preparation methods of MIPs towards flavonoids, including bulk polymerization, precipitation polymerization, surface imprinting and emulsion polymerization. Additionally, a variety of applications of MIPs towards flavonoids are summarized, such as the different forms of MIP-based solid phase extraction (SPE) for the separation of flavonoids, and the MIP-based sensors for the detection of flavonoids. Finally, we discussed the advantages and disadvantages of the current synthetic methods for preparing MIPs of flavonoids and prospected the approaches for detecting flavonoids in the future. The purpose of this review is to provide helpful suggestions for the novel preparation methods of MIPs for the extraction of flavonoids and emerging applications of MIPs for the detection of flavonoids from natural products and biological samples.

Adsorption of pollutants in wastewater via biosorbents, nanoparticles and magnetic biosorbents: A review

Adsorption has gained much attention as one of the efficient approaches to remediate the contaminants in wastewater. Herein, this critical review focuses on the preparation, modification, application and regeneration of the biosorbents, nanoparticles and magnetic biosorbents for the wastewater treatment in recent 5 years (2017-2021). Among these materials, the development of magnetic biosorbents is attractive owing to their variable active sites, high specific surface area, easy separation and low cost. To improve the adsorption performance of biosorbents, the chemical activations such as acid, alkali and salt activations of biosorbents are discussed. In general, the oxidation reaction in acid, alkali and salt activations increases the porosity of biosorbents. The surface characteristics, surface chemistry of the biosorbents and magnetic biosorbents such as electrostatic interaction, π-π interaction and hydrogen bonding are highlighted. Ionic compounds are separated through ion exchange, surface charge and electrostatic interactions while the organic pollutants are removed via hydrophobicity, π-π interactions and hydrogen bonding. The effect of solution pH, adsorbent dosage, initial concentration of pollutants, adsorption duration and temperature on the adsorption capacity, and removal efficiency are discussed. Generally, an increase in adsorbent dosage resulted in a decrease in adsorption capacity due to the excessive active sites. On the other hand, a higher initial concentration or an increase in contact time of adsorbent increased the driving force, subsequently enhancing the adsorption capacity. Finally, this review will be concluded with a summary, challenges and future outlook of magnetic biosorbents. It is anticipated that this review will provide insights into engineering advanced and suitable materials to achieve cost-effective and scalable adsorbents for practical and sustainable environmental remediation.

Dual-Functional Monomer MIPs and Their Comparison to Mono-Functional Monomer MIPs for SPE and as Sensors

A molecularly imprinted polymer (MIP) is a synthetic polymer that has characteristics such as natural receptors which are able to interact and bind to a specific molecule that is used as a template in the MIP polymerization process. MIPs have been widely developed because of the need for more selective, effective, and efficient methods for sample preparation, identification, isolation, and separation. The MIP compositions consist of a template, monomer, crosslinker, initiator, and porogenic solvent. Generally, MIPs are only synthesized using one type of monomer (mono-functional monomer); however, along with the development of MIPs, MIPs began to be synthesized using two types of monomers to improve the performance of MIPs. MIPs used for identification, separation, and molecular analysis have the most applications in solid-phase extraction (SPE) and as biochemical sensors. Until now, no review article has discussed the various studies carried out in recent years in relation to the synthesis of dual-functional monomer MIPs. This review is necessary, as an improvement in the performance of MIPs still needs to be explored, and a dual-functional monomer strategy is one way of overcoming the current performance limitations. In this review article, we discuss the techniques commonly used in the synthesis of dual-functional monomer MIPs, and the use of dual-functional monomer MIPs as sorbents in the MI-SPE method and as detection elements in biochemical sensors. The application of dual-functional monomer MIPs showed better selectivity and adsorption capacity in these areas when compared to mono-functional monomer MIPs. However, the combination of functional monomers must be selected properly, in order to achieve an effective synergistic effect and produce the ideal MIP characteristics. Therefore, studies regarding the synergistic effect of the MIP combination still need to be carried out to obtain MIPs with superior characteristics.

Potential of sodium dodecyl sulfate micellar solutions as eluents in magnetic dispersive micro-solid phase extraction with polydopamine-coated magnetite nanoparticles. Application to antidepressant drugs

In this paper, the potential of micellar solutions of the anionic surfactant sodium dodecyl sulfate (SDS) as eluents in dispersive micro-solid phase extraction (D-μSPE) using polydopamine-coated magnetite nanoparticles (Fe₃O₄@PDA NPs) for the extraction and preconcentration of seven basic drugs (bupropion, citalopram, fluoxetine, mianserin, nomifensine, trimipramine, and viloxazine) is explored for the first time (to the best to our knowledge) and compared with conventional hydro-organic eluents. The impact of the sample solution pH, Fe₃O₄@PDA NPs and PDA coating amounts and extraction time on the extraction efficiency (EE), as well as the composition of the eluent on the overall efficiency (OE) are studied. Under the selected experimental conditions (50 mg of Fe₃O₄@PDA NPs, 100 μL of 1 M NH₃, 5 min of extraction time and 0.15 M SDS at pH 2.6 as eluent), EE and OE values were higher than 90% for all compounds and for the most hydrophobic compounds (trimipramine, fluoxetine and mianserin), respectively. The results shown in this paper demonstrate the suitability of Fe₃O₄@PDA NPs as a sorbent for the extraction of antidepressants as well as the advantages of using SDS micellar solutions over classic hydro-organic eluents containing methanol, acetonitrile or tetrahydrofuran. Finally, the stability and reusability of the Fe₃O₄@PDA NPs is proven.

Improved magnetic solid-phase extraction based on magnetic sorbent obtained from sand for the extraction of pesticides from fruit juice

BACKGROUND

A combination of magnetic solid-phase extraction using an efficient and cheap magnetic sorbent obtained from sand and dispersive liquid-liquid microextraction has been developed for the extraction of nine multiclass pesticides (clodinafop-propargyl, haloxyfop-R-methyl, fenoxaprop-P-ethyl, oxadiazon, penconazole, diniconazole, chlorpyrifos, fenazaquin, and fenpropathrin) from commercial fruit juices (sour cherry, pomegranate, grape, watermelon, orange, apricot, and peach juices). The enriched pesticides were determined by gas chromatography-flame ionization detector and gas chromatography-mass spectrometry. The sorbent was natural iron oxide entrapped in silica along with some impurities. In this method, to extract the analytes from the samples, an appropriate amount of the magnetic sorbent (at mg level) is added. Then the sorbent particles are isolated from the solution using an external magnetic field and the adsorbed analytes are desorbed from the sorbent by acetone. In the following, a dispersive liquid-liquid microextraction procedure is carried out to concentrate the analytes more and to reach low limits of detection.

RESULTS

Under optimized extraction conditions, the method revealed satisfactory repeatability (relative standard deviation ≤8% for intra-day and inter-day precision), reasonable extraction recovery (43.3-55.9%), high enrichment factors (433-559), and low limits of detection (0.45-0.89 μg L^-1 ).

CONCLUSION

The method was applied in the analysis of pesticides in various fruit juices. Chlorpyrifos was found in peach juice at a concentration of 27 ± 2 μg L^-1 (n = 3) using a gas chromatography-flame ionization detector. To verify the results, the peach juice was also injected into gas chromatography-mass spectrometry after applying the proposed extraction method. © 2022 Society of Chemical Industry.

Comparative Evaluation of Different Surface Coatings of Fe3O4-Based Magnetic Nano Sorbent for Applications in the Nucleic Acids Extraction

Nucleic acid extraction and purification are crucial steps in sample preparation for multiple diagnostic procedures. Routine methodologies of DNA isolation require benchtop equipment (e.g., centrifuges) and labor-intensive steps. Magnetic nanoparticles (MNPs) as solid-phase sorbents could simplify this procedure. A wide range of surface coatings employs various molecular interactions between dsDNA and magnetic nano-sorbents. However, a reliable, comparative evaluation of their performance is complex. In this work, selected Fe3O4 modifications, i.e., polyethyleneimine, gold, silica, and graphene derivatives, were comprehensively evaluated for applications in dsDNA extraction. A family of single batch nanoparticles was compared in terms of morphology (STEM), composition (ICP-MS/MS and elemental analysis), surface coating (UV-Vis, TGA, FTIR), and MNP charge (ζ-potential). ICP-MS/MS was also used to unify MNPs concentration allowing a reliable assessment of individual coatings on DNA extraction. Moreover, studies on adsorption medium (monovalent vs. divalent ions) and extraction buffer composition were carried out. As a result, essential relationships between nanoparticle coatings and DNA adsorption efficiencies have been noticed. Fe3O4@PEI MNPs turned out to be the most efficient nano sorbents. The optimized composition of the extraction buffer (medium containing 0.1 mM EDTA) helped avoid problems with Fe3+ stripping, which improved the validity of the spectroscopic determination of DNA recovery.

Monodispersed CaCO3@hydroxyapatite/magnetite microspheres for efficient and selective extraction of benzoylurea insecticides in tea beverages samples

A novel monodispersed CaCO₃@hydroxyapatite/magnetite microsphere (CaCO₃ @HAP/Fe₃O₄) was prepared via an in-situ growth strategy, and applied as an adsorbent for efficient and selective adsorption of benzoylurea insecticides (BUs) in various tea beverages samples. The sorbent exhibited uniformity in particle size, good mono-dispersibility and excellent solvent stability. The adsorption equilibrium of BUs (100 ng/mL) in 10 mL of tea beverages samples was achieved on 20 mg of CaCO₃ @HAP/Fe₃O₄ within 10 min. The adsorption followed pseudo-second-order kinetics and Langmuir models and the maximum adsorption capacities of 131.9-161.3 mg/g were accomplished via hydrophobic interactions, hydrogen bonding, and the affinity of F atom and Ca²⁺. Coupled with high performance liquid chromatography, the method offered wide linear ranges of 0.8-1000 ng/mL with correlation coefficients (r) ≥ 0.9995, low limits of detection of 0.2-0.3 ng/mL and large enrichment factors of 75.7-102. The recoveries ranged from 75.7%- 102% with intra- and inter-day precisions of 1.9%- 9.3% and 1.6%- 11.8%, respectively. In addition, CaCO₃ @HAP/Fe₃O₄ could be easily regenerated and reused at least 10 times with no significant loss of recovery. These results revealed an alternative strategy for fast and convenient determination of BUs in tea beverages samples and proved the great feasibility of CaCO₃ @HAP/Fe₃O₄ in the application for the selective adsorption of BUs.

Biocompatible magnetite nanoparticles coated with ionic liquid-based surfactantas a hydrophilic sorbent for dispersive solid phase microextraction of cephalosporins prior to their quantitation by HPTLC

Extraction of highly hydrophilic compounds from biological fluids including urine or plasma samples is a dilemma due to high hydrophilicity of the matrix itself. The main aim of the current work is to explore the competence of ionic liquid (IL)-based surfactant-coated mineral oxide nanoparticles (NPs) in dispersive solid-phase microextraction (d-SPME) of highly hydrophilic analytes taking cefoperazone (CPZ) as a model analyte for the study. The IL-based surfactant coated Fe₃O₄ NPs is utilized as an innovative adsorbent for the separation and pre-concentration of CPZ after intramuscular injection (I.M) in rabbits. The utilized magnetite NPs were synthesized via simple and reliable co-precipitation procedure, which doesn't require any air-free environment and depends on a single iron (III) salt. Characterization of the as-synthesized NPs was achieved by X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) and energy dispersive X-ray (EDX). Surface area measurements show that Fe₃O₄ NPs have large surface area of 75 m² g^-1. The developed approach utilizes the unique properties of the IL-based surfactant including multiple polar interaction types provided by the polar head in addition to merits of Fe₃O₄ nanoparticles, which include large adsorptive capacity and magnetic properties, to improve separation, save time, and achieve satisfactory recovery. Comprehensive study was developed for the factors, that affect the adsorption capacity such as pH, NPs amount, IL-based surfactant concentration, ionic strength, adsorption time, and desorption conditions. Moreover, the adsorption data was fitted to Langmuir and second-order kinetic models as reflected by the reasonable determination coefficients of 0.9319 and 0.9726, respectively. Under the optimized conditions, the developed approach achieves good correlation coefficient of 0.9975, and 0.9981 over linearity range of 0.7-12.0 and 4.0-50.0 µg mL^-1 for both CPZ standard solutions and spiked rabbit plasma, respectively. It also provides good sensitivity expressed by the low values of limit of detection (LOD) of 0.2 and 1.2 µg mL^-1 and limit of quantitation (LOQ) of 0.7 and 4.0 µg mL^-1 for both the standard solutions and spiked plasma, respectively. The developed approach was also applied successfully for monitoring CPZ in rabbit plasma samples with satisfactory recovery % (83-110). In addition, a detailed pharmacokinetic study is performed where pharmacokinetic parameters of CPZ in rabbit plasma samples were calculated.

Recent progress in organic-inorganic hybrid materials as absorbents in sample pretreatment for pesticide detection

Sample pretreatment is essential for trace analysis of pesticides in complex food and environment matrices. Recently, organic-inorganic hybrid materials have gained increasing attention in pesticide extraction and preconcentration. This review highlighted the common organic-inorganic hybrid materials used as absorbents in sample pretreatment for pesticide detection. Furthermore, the preparation and characterization of organic-inorganic hybrid materials were summarized. To obtain a deep understanding of adsorption toward target analytes, the adsorption mechanism and absorption evaluation were discussed. Finally, the applications of organic-inorganic hybrid materials in sample pretreatment techniques and perspectives in the future are also discussed.

Magnetic Nanoparticle-Based Dispersive Solid-Phase Microextraction of Three UV Blockers Prior to Their Determination by HPLC-DAD

The need for proper handling of environmental samples is significant, owing to their environmental effects on both humans and animals, as well as their immediate surroundings. In the current study, magnetic nanoparticle-based dispersive solid-phase microextraction was combined with high-performance liquid chromatography using a diode array as the detector (HPLC-DAD) for both the separation and determination of three different UV blockers, namely octocrylene, ethylhexyl methoxycinnamate, and avobenzone. The optimum conditions for the extraction were found to be as follows: Stearic acid magnetic nanoparticles (20 mg) as the sorbent, acetonitrile (100 µL) as the eluent, as well as a sample pH of 2.50, adsorption and desorption time of 1.0 min, with a 3.0 mL sample volume. The limits of detection were as low as 0.05 µg mL-1. The coefficient of determination (R2) was above 0.9950, while the percentages of relative recoveries (%RR) were between 81.2 and 112% for the three UV blockers from the environmental water samples and sunscreen products.

Recent advances in acoustic microfluidics and its exemplary applications

Acoustic-based microfluidics has been widely used in recent years for fundamental research due to its simple device design, biocompatibility, and contactless operation. In this article, the basic theory, typical devices, and technical applications of acoustic microfluidics technology are summarized. First, the theory of acoustic microfluidics is introduced from the classification of acoustic waves, acoustic radiation force, and streaming flow. Then, various applications of acoustic microfluidics including sorting, mixing, atomization, trapping, patterning, and acoustothermal heating are reviewed. Finally, the development trends of acoustic microfluidics in the future were summarized and looked forward to.

Advancement and New Trends in Analysis of Pesticide Residues in Food: A Comprehensive Review

Food safety is a rising challenge worldwide due to the expanding population and the need to produce food to feed the growing population. At the same time, pesticide residues found in high concentrations in fresh agriculture pose a significant threat to food safety. Presently, crop output is being increased by applying herbicides, fungicides, insecticides, pesticides, fertilizers, nematicides, and soil amendments. A combination of factors, including bioaccumulation, widespread usage, selective toxicity, and stability, make pesticides among the most toxic compounds polluting the environment. They are especially harmful in vegetables and fruits because people are exposed to them. Thus, it is critical to monitor pesticide levels in fruits and vegetables using all analytical techniques available. Any evaluation of the condition of pesticide contamination in fruits and vegetables necessitates knowledge of maximum residue levels (MRLs). We set out the problems in determining various types of pesticides in vegetables and fruits, including the complexity and the diversity of matrices in biological materials. This review examines the different analytical techniques to determine the target analytes that must be isolated before final consumption. Many processes involved determining pesticide residues in fruits and vegetables and their advantages and disadvantages have been discussed with recommendations. Furthermore, MRLs of target pesticide residues in fruit and vegetable samples are discussed in the context of data from the literature. The review also examines MRLs' impact on the international trade of fruits and vegetables. Accurate, sensitive, and robust analytical procedures are critical to ensuring that pesticide levels in food products are effectively regulated. Despite advances in detection technology, effective sample preparation procedures for pesticide residue measurement in cereals and feedstuffs are still needed. In addition, these methods must be compatible with current analytical techniques. Multi-residue approaches that cover a wide range of pesticides are desired, even though pesticides' diverse natures, classes, and physio-chemical characteristics make such methods challenging to assemble. This review will be valuable to food analysts and regulatory authorities to monitor the quality and safety of fresh food products.

Preparation of polydopamine-functionalized mesoporous silica-coated core/shell magnetic nanocomposite for efficiently extracting five amphetamine-type stimulants from wastewater followed by UPLC-MS/MS determination

Wastewater-based epidemiology (WBE) was a near-real-time monitoring strategy for illegal drugs. However, solid-phase extraction (SPE) widely used in WBE was time-consuming and labor-intensive to extract ultra-trace target compounds from wastewater. In this study, a convenient magnetic solid-phase extraction (MSPE) approach based on newly designed and synthesized polydopamine functionalized core-shell magnetic mesoporous silica (Fe₃O₄@nSiO₂@mSiO₂@PDA) nanocomposite was synthesized and firstly utilized for simultaneously extracting five amphetamine-type stimulants (ATSs) from wastewater samples. Subsequently, ultrahigh performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method coupled with optimal MSPE was developed for determination of ultra-trace ATSs in wastewater. The validation results indicated a favorable linearity ranging from 1 to 200 ng L^-1, low limit of detection (0.5-2.5 ng L^-1), and qualified recovery (95.1-106.6%) and repeatability (0.6-6.2%). In addition, the Fe₃O₄@nSiO₂@mSiO₂@PDA nanoparticles could be reused for at least ten times without significant loss of the adsorption efficiencies of ATSs. Finally, the MSPE-UPLC-MS/MS method was successfully applied to real wastewater samples with the results that the preparation procedure was shrunk from 2 h to 30 min without obvious decline of extraction efficiency compared with the SPE. Hence, based on merits of the novel Fe₃O₄@nSiO₂@mSiO₂@PDA nanocomposite, the proposed method is convenient and reliable for determination of ATSs in wastewater.