Chemically modified electrodes for electrochemical detection of dopamine in the presence of uric acid and ascorbic acid: A review

Macromolecule-Nanoparticle-Based Hybrid Materials for Biosensor Applications

Biosensors function as sophisticated devices, converting biochemical reactions into electrical signals. Contemporary emphasis on developing biosensor devices with refined sensitivity and selectivity is critical due to their extensive functional capabilities. However, a significant challenge lies in the binding affinity of biosensors to biomolecules, requiring adept conversion and amplification of interactions into various signal modalities like electrical, optical, gravimetric, and electrochemical outputs. Overcoming challenges associated with sensitivity, detection limits, response time, reproducibility, and stability is essential for efficient biosensor creation. The central aspect of the fabrication of any biosensor is focused towards forming an effective interface between the analyte electrode which significantly influences the overall biosensor quality. Polymers and macromolecular systems are favored for their distinct properties and versatile applications. Enhancing the properties and conductivity of these systems can be achieved through incorporating nanoparticles or carbonaceous moieties. Hybrid composite materials, possessing a unique combination of attributes like advanced sensitivity, selectivity, thermal stability, mechanical flexibility, biocompatibility, and tunable electrical properties, emerge as promising candidates for biosensor applications. In addition, this approach enhances the electrochemical response, signal amplification, and stability of fabricated biosensors, contributing to their effectiveness. This review predominantly explores recent advancements in utilizing macrocyclic and macromolecular conjugated systems, such as phthalocyanines, porphyrins, polymers, etc. and their hybrids, with a specific focus on signal amplification in biosensors. It comprehensively covers synthetic strategies, properties, working mechanisms, and the potential of these systems for detecting biomolecules like glucose, hydrogen peroxide, uric acid, ascorbic acid, dopamine, cholesterol, amino acids, and cancer cells. Furthermore, this review delves into the progress made, elucidating the mechanisms responsible for signal amplification. The Conclusion addresses the challenges and future directions of macromolecule-based hybrids in biosensor applications, providing a concise overview of this evolving field. The narrative emphasizes the importance of biosensor technology advancement, illustrating the role of smart design and material enhancement in improving performance across various domains.

Synthesis of cobalt phosphide hybrid for simultaneous electrochemical detection of ascorbic acid, dopamine, and uric acid

Ascorbic acid (AA), dopamine (DA), and uric acid (UA) are important biomarkers for the clinical screening of diseases. However, the simultaneous determination of these three analytes is still challenging. Herein, we report a facile metal-organic framework (MOF)-derived method to synthesize a cobalt phosphide (Co2P) hybrid for the simultaneous electrochemical detection of AA, DA and UA. The introduction of highly dispersed Co2P nanoparticles onto a P, N-doped porous carbon matrix is responsible for providing abundant active sites and facilitating electron transfer, thereby contributing to the improved electrocatalytic performance of the hybrid. Well-resolved oxidation peaks and an enhanced current response for the simultaneous oxidation of AA, DA, and UA were achieved using a Co2P hybrid-modified screen-printed electrode (Co2P hybrid-SPE) with the differential pulse voltammetry (DPV) method. The detection limits for AA, DA, and UA in simultaneous detection were calculated as 17.80 μM, 0.018 μM, and 0.068 μM (S/N = 3), respectively. Furthermore, the feasibility of using Co2P hybrid-SPE for the simultaneous detection of AA, DA, and UA in real serum samples was also confirmed.

Constructing a Hydrophilic Microsensor for High-Antifouling Neurotransmitter Dopamine Sensing

Real-time sensing of dopamine is essential for understanding its physiological function and clarifying the pathophysiological mechanism of diseases caused by impaired dopamine systems. However, severe fouling from nonspecific protein adsorption, for a long time, limited conventional neural recording electrodes concerning recording stability. This study reported a high-antifouling nanocrystalline boron-doped diamond microsensor grown on a carbon fiber substrate. The antifouling properties of this diamond sensor were strongly related to the grain size (i.e., nanocrystalline and microcrystalline) and surface terminations (i.e., oxygen and hydrogen terminals). Experimental observations and molecular dynamics calculations demonstrated that the oxygen-terminated nanocrystalline boron-doped diamond microsensor exhibited enhanced antifouling characteristics against protein adsorption, which was attributed to the formation of a strong hydration layer as a physical and energetic barrier that prevents protein adsorption on the surface. This finally allowed for in vivo monitoring of dopamine in rat brains upon potassium chloride stimulation, thus presenting a potential solution for the design of next-generation antifouling neural recording sensors. Experimental observations and molecular dynamics calculations demonstrated that the oxygen-terminated nanocrystalline boron-doped diamond (O-NCBDD) microsensor exhibited ultrahydrophilic properties with a contact angle of 4.9°, which was prone to forming a strong hydration layer as a physical and energetic barrier to withstand the adsorption of proteins. The proposed O-NCBDD microsensor exhibited a high detection sensitivity of 5.14 μA μM-1 cm-2 and a low detection limit of 25.7 nM. This finally allowed for in vivo monitoring of dopamine with an average concentration of 1.3 μM in rat brains upon 2 μL of potassium chloride stimulation, thus presenting a potential solution for the design of next-generation antifouling neural recording sensors.

The Role of Catecholamines in the Pathogenesis of Diseases and the Modified Electrodes for Electrochemical Detection of Catecholamines: A Review

Catecholamines (CAs), which include adrenaline, noradrenaline, and dopamine, are neurotransmitters and hormones that critically regulate the cardiovascular system, metabolism, and stress response in the human body. The abnormal levels of these molecules can lead to the development of various diseases, including pheochromocytoma and paragangliomas, Alzheimer's disease, and Takotsubo cardiomyopathy. Due to their low cost, high sensitivity, flexible detection strategies, ease of integration, and miniaturization, electrochemical techniques have been extensively employed in the detection of CAs, surpassing traditional analytical methods. Electrochemical detection of CAs in real samples is challenging due to the tendency of poisoning electrode. Chemically modified electrodes have been widely used to solve the problems of poor sensitivity and selectivity faced by bare electrodes. There are a few articles that provide an overview of electrochemical detection and efficient enrichment of CAs, but there is a dearth of updates on the role of CAs in the pathogenesis of diseases. Additionally, there is still a lack of systematic synthesis with a focus on modified electrodes for electrochemical detection. Thus, this review provides a summary of the recent clinical pathogenesis of CAs and the modified electrodes for electrochemical detection of CAs published between 2017 and 2022. Moreover, challenges and future perspectives are also highlighted. This work is expected to provide useful guidance to researchers entering this interdisciplinary field, promoting further development of CAs pathogenesis, and developing more novel chemically modified electrodes for the detection of CAs.

New insight into interference-free and highly sensitive dopamine electroanalysis

Early diagnosis of Parkinson's disease and hyperprolactinemia based on electrochemical dopamine (DA) sensing appears as an efficient and promising practical diagnostic method. However, the coexistence of DA in real samples with ascorbic acid (AA) and uric acid (UA), which oxidize at potentials close to its own, prevents the accurate electrochemical DA sensing and therefore, hinders the effective diagnosis of these diseases. In this work, we successfully combined the electrostatic proprieties of GO, the electron transfer properties of an AuNPs@MWCNTs nanocomposite and the ability of thiol group of the amino acid l-cysteine to react chemically with carbonyl groups of UA, to develop a novel approach that enabled complete suppression of interference from AA and UA and hence, accurate DA electroanalysis in the conditions close to those of human blood serum. The chemical reaction between l-cysteine and UA was evidenced by monitoring the DPV responses of UA under different conditions. XRD, Raman spectroscopy, XPS and FE-SEM revealed the successful synthesis of GO and AuNPs@MWCNTs. The study of the electrode material (GO-AuNPs@MWCNTs) morphology via FE-SEM and HR-TEM showed that AuNPs@MWCNTs are distributed throughout the exfoliated GO layers. The fabricated sensor was calibrated in the concentration range of 0.5-5 μM, in the presence of the highest blood concentrations of AA and UA for healthy individuals. A linear relationship was observed and the LOD was found to be 1.31 nM (S/N = 3). Furthermore, the sensor showed good electron transfer kinetics, good repeatability and reproducibility, satisfactory long-term stability, and recoveries in human blood serum.

Microinstrumentation for Brain Organoids

Brain organoids are three-dimensional aggregates of self-organized differentiated stem cells that mimic the structure and function of human brain regions. Organoids bridge the gaps between conventional drug screening models such as planar mammalian cell culture, animal studies, and clinical trials. They can revolutionize the fields of developmental biology, neuroscience, toxicology, and computer engineering. Conventional microinstrumentation for conventional cellular engineering, such as planar microfluidic chips; microelectrode arrays (MEAs); and optical, magnetic, and acoustic techniques, has limitations when applied to three-dimensional (3D) organoids, primarily due to their limits with inherently two-dimensional geometry and interfacing. Hence, there is an urgent need to develop new instrumentation compatible with live cell culture techniques and with scalable 3D formats relevant to organoids. This review discusses conventional planar approaches and emerging 3D microinstrumentation necessary for advanced organoid-machine interfaces. Specifically, this article surveys recently developed microinstrumentation, including 3D printed and curved microfluidics, 3D and fast-scan optical techniques, buckling and self-folding MEAs, 3D interfaces for electrochemical measurements, and 3D spatially controllable magnetic and acoustic technologies relevant to two-way information transfer with brain organoids. This article highlights key challenges that must be addressed for robust organoid culture and reliable 3D spatiotemporal information transfer.

Simultaneous recognition of dopamine and uric acid in real samples through highly sensitive new electrode fabricated using ZnO/carbon quantum dots: bio-imaging and theoretical studies

Dopamine (DA) and uric acid (UA), which are vital components in human metabolism, cause several health problems if they are present in altered concentrations; thus, the determination of DA and UA is essential in real samples using selective sensors. In the present study, graphite carbon paste electrodes (CPE) were fabricated using ZnO/carbon quantum dots (ZnO/CQDs) and employed as electrochemical sensors for the detection of DA and UA. These electrodes were fully characterized via different analytical techniques (XRD, SEM, TEM, XPS, and EDS). The electrochemical responses from the modified electrodes were evaluated using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy. The results showed that the present electrode has exhibited high sensitivity towards DA, recognizing even at low concentrations (0.12 μM), and no inference was observed in the presence of UA. The ZnO/CQD electrode was applied for the simultaneous detection of co-existing DA and UA in real human urine samples and the peak potential separation between DA and UA was found to be greatly associated with the synergistic effect originated from ZnO and CQDs. The limit of detection (LOD) of the electrode was analyzed, and compared with other commercially available electrodes. Thus, the ZnO/CQD electrode was used to detect DA and UA in real samples, such as Saccharomyces cerevisiae cells.

A General Review of Methodologies Used in the Determination of Cholesterol (C27H46O) Levels in Foods

Cholesterol (C27H46O) is a lipid-derived substance found in lipoproteins and cell membranes. It is also one of the main sources for the production of bile acids, vitamin D, and steroid hormones. Today, foods are evaluated by consumers not only according to their taste and nutritional content but also according to their effects on consumer health. For example, many consumers choose foods according to their cholesterol level. The cholesterol in the food can directly affect the blood cholesterol level when consumed, which can lead to cardiovascular diseases. High levels of cholesterol can lead to diet-related human diseases such as cardiac arrest, paralysis, type II diabetes, and cerebral hemorrhage. In societies with high living standards, interest in and consumption of foods that lower or have low cholesterol levels have increased recently. Accordingly, efforts to increase the variety of foods with reduced cholesterol levels are on the rise. This has indirectly led to the accurate measurement of cholesterol levels in blood and food being of great importance. Classical chemical, enzymatic, colorimetric, polarographic, chromatographic, and spectrophotometric methods; enzymatic, nonenzymatic, and electrochemical sensors; and biosensors are used for the determination of cholesterol in foods. The purpose of this review is to reveal and explore current and future trends in cholesterol detection methods in foods. This review will summarize the most appropriate and standard methods for measuring cholesterol in biological components and foods.

Highly Conductive Peroxidase-like Ce-MoS2 Nanoflowers for the Simultaneous Electrochemical Detection of Dopamine and Epinephrine

The accurate and simultaneous detection of neurotransmitters, such as dopamine (DA) and epinephrine (EP), is of paramount importance in clinical diagnostic fields. Herein, we developed cerium-molybdenum disulfide nanoflowers (Ce-MoS2 NFs) using a simple one-pot hydrothermal method and demonstrated that they are highly conductive and exhibit significant peroxidase-mimicking activity, which was applied for the simultaneous electrochemical detection of DA and EP. Ce-MoS2 NFs showed a unique structure, comprising MoS2 NFs with divalent Ce ions. This structural design imparted a significantly enlarged surface area of 220.5 m2 g-1 with abundant active sites as well as enhanced redox properties, facilitating electron transfer and peroxidase-like catalytic action compared with bare MoS2 NFs without Ce incorporation. Based on these beneficial features, Ce-MoS2 NFs were incorporated onto a screen-printed electrode (Ce-MoS2 NFs/SPE), enabling the electrochemical detection of H2O2 based on their peroxidase-like activity. Ce-MoS2 NFs/SPE biosensors also showed distinct electrocatalytic oxidation characteristics for DA and EP, consequently yielding the highly selective, sensitive, and simultaneous detection of target DA and EP. Dynamic linear ranges for both DA and EP were determined to be 0.05~100 μM, with detection limits (S/N = 3) of 28 nM and 44 nM, respectively. This study shows the potential of hierarchically structured Ce-incorporated MoS2 NFs to enhance the detection performances of electrochemical biosensors, thus enabling extensive applications in healthcare, diagnostics, and environmental monitoring.

Smart and sensitive nanomaterial-based electrochemical sensor for the determination of a poly (ADP-ribose) polymerase (PARP) inhibitor anticancer agent

In this research, we propose a novel approach for constructing a sensitive and selective electrochemical sensor utilizing high-quality multi-walled carbon nanotubes functionalized with amino groups (MWCNT-NH2) for the detection of Talazoparib (TLZ), a poly (ADP-ribose) polymerase (PARP) enzyme inhibitor, in real samples. The MWCNT-NH2-based sensor exhibited remarkable performance characteristics, including excellent repeatability, reproducibility, and high selectivity against various interferences. Under optimized conditions, the sensor demonstrated a wide linear concentration range of 1.0-5.0 μM, with a low limit of detection (LOD) of 0.201 μM. Substantiated by rigorous analysis of pharmaceutical and biological matrices, our methodology emerges as a paragon of reliability, boasting recovery rates within the satisfactory bracket of 96.38-105.25%. The successful application of the MWCNT-NH2-based sensor in practical sample analysis highlights its potential for implementation in clinical and pharmaceutical settings. This research not only advances the application of MWCNT-NH2 in electrochemical sensing but also opens new avenues for the development and monitoring of innovative anticancer treatments. The insights gained from our study have far-reaching implications, pointing toward a future where precision and innovation converge to improve patient care and treatment outcomes.

Robust Zeolitic Tetrazole Framework for Electrocatalytic Dopamine Detection with High Selectivity

A novel zeolitic tetrazolate framework (ZTF-8) has been synthesized by solvent-free heat-assisted (70 °C) mechanochemical grinding of zinc acetate and 5-methyl tetrazole in the presence of NaOH powder. The structure of ZTF-8 adopts the zeolitic sodalite (SOD) topology with uncoordinated N-heteroatom sites and resembles the structure of the well-known zeolitic imidazole framework ZIF-8. ZTF-8 is exceptionally stable in 0.1 M aqueous acid and base solutions for 60 days at 25 °C. The unique structure with uncoordinated N-heteroatom active sites and exceptional stability of ZTF-8 facilitated the electrocatalytic oxidation of dopamine to dopamine quinone at neutral pH. Without any postsynthetic modification, ZTF-8 is directly used for the facile electrochemical detection of dopamine over a wide range of concentrations (5-550 μM) with a high sensitivity (2410.8 μA mM-1 cm-2). It also demonstrated promising selectivity over other interferents of similar oxidation potential, such as ascorbic acid and uric acid. The DFT study revealed that the ZTF-8 framework has a higher binding energy (-145.07 kJ/mol) and stronger interaction with dopamine than its isostructural ZIF-8 structure (-130.42 kJ/mol).

Crystal plane-integrated strontium oxide/hexagonal boron nitride nanohybrids for rapid electrochemical sensing of anticancer drugs in human blood serum samples

In this work, the crystal plane of strontium oxide (SrO) nanorods was integrated into hexagonal-boron nitride (h-BN) nanosheets to form 1D-2D (SrO/h-BN) composite were utilized for the electrochemical detection of the chemotherapeutic drug 5-fluorouracil (5-Fu). 5-Fu is a clinically proven and the third most frequently applied chemotherapeutic drug for treating solid tumours, such as colorectal, stomach, cutaneous and breast malignancies. Its overdoses lead to toxic metabolite accumulation that has serious adverse consequences on humans, including neurotoxicity, death and the induction of morbidity. Therefore, to improve the chemotherapy and predict the potential adverse effects of 5-Fu residues in the human body, susceptible and quick analytical methods for detecting 5-Fu in human body fluids (blood serum/plasma and urine) are needed. The effective interaction of the synthesized SrO/h-BN composite shows increased efficiency for the electrochemical detection of 5-Fu with good selectivity. Notably, a simple sonochemical method achieved a synergistic interaction between the (100) plane of SrO and the (002) plane of h-BN. Various analytical and spectroscopic techniques were used to characterize the SrO/h-BN nanocomposite, which provided useful insights into the composition and properties of the composite material. The crystalline, structural and chemical characteristics of the as-synthesized material were characterized by XRD, Raman spectroscopy, HR-TEM, XPS and HR-SEM. Furthermore, the proposed electrode's electrochemical sensing capability was analysed using CV, EIS, DPV and i-t curve methods. Numerous active sites created on a modified electrode enhanced the mass transport and electron transfer rate, thereby increasing the electrochemical activity towards the 5-Fu detection. Consequently, under optimized conditions, the SrO/h-BN/GCE exhibited remarkable selectivity, durability, low detection limit (0.003 μM) and wide linear range (0.02-56 μM) for 5-Fu. Finally, the successful application of this sensor for 5-Fu detection in biological samples was successfully tested with high recovery percentages.

Perspectives for the creation of a new type of vaccine preparations based on pseudovirus particles using polio vaccine as an example

Traditional antiviral vaccines are currently created by inactivating the virus chemically, most often using formaldehyde or β-propiolactone. These approaches are not optimal since they negatively affect the safety of the antigenic determinants of the inactivated particles and require additional purification stages. The most promising platforms for creating vaccines are based on pseudoviruses, i.e., viruses that have completely preserved the outer shell (capsid), while losing the ability to reproduce owing to the destruction of the genome. The irradiation of viruses with electron beam is the optimal way to create pseudoviral particles. In this review, with the example of the poliovirus, the main algorithms that can be applied to characterize pseudoviral particles functionally and structurally in the process of creating a vaccine preparation are presented. These algorithms are, namely, the analysis of the degree of genome destruction and coimmunogenicity. The structure of the poliovirus and methods of its inactivation are considered. Methods for assessing residual infectivity and immunogenicity are proposed for the functional characterization of pseudoviruses. Genome integrity analysis approaches, atomic force and electron microscopy, surface plasmon resonance, and bioelectrochemical methods are crucial to structural characterization of the pseudovirus particles.

A review of zeolitic imidazolate frameworks (ZIFs) as electrochemical sensors for important small biomolecules in human body fluids

Small biomolecules play a critical role in the fundamental processes that sustain life and are essential for the proper functioning of the human body. The detection of small biomolecules has garnered significant interest in various fields, including disease diagnosis and medicine. Electrochemical techniques are commonly employed in the detection of critical biomolecules through the principle of redox reactions. It is also a very convenient, cheap, simple, fast, and accurate measurement method in analytical chemistry. Zeolitic imidazolate frameworks (ZIFs) are a unique type of metal-organic framework (MOF) composed of porous crystals with extended three-dimensional structures. These frameworks are made up of metal ions and imidazolate linkers, which form a highly porous and stable structure. In addition to their many advantages in other applications, ZIFs have emerged as promising candidates for electrochemical sensors. Their large surface area, pore diameter, and stability make them ideal for use in sensing applications, particularly in the detection of small molecules and ions. This review summarizes the critical role of small biomolecules in the human body, the standard features of electrochemical analysis, and the utilization of various types of ZIF materials (including carbon composites, metal-based composites, ZIF polymer materials, and ZIF-derived materials) for the detection of important small biomolecules in human body fluids. Lastly, we provide an overview of the current status, challenges, and future outlook for research on ZIF materials.

Recent Advances in Catecholamines Analytical Detection Methods and Their Pretreatment Technologies

Catecholamines (CAs), including adrenaline, noradrenaline, and dopamine, are neurotransmitters and hormones that play a critical role in regulating the cardiovascular system, metabolism, and stress response in the human body. As promising methods for real-time monitoring of catecholamine neurotransmitters, LC-MS detectors have gained widespread acceptance and shown significant progress over the past few years. Other detection methods such as fluorescence detection, colorimetric assays, surface-enhanced Raman spectroscopy, and surface plasmon resonance spectroscopy have also been developed to varying degrees. In addition, efficient pretreatment technology for CAs is flourishing due to the increasing development of many highly selective and recoverable materials. There are a few articles that provide an overview of electrochemical detection and efficient enrichment, but a comprehensive summary focusing on analytical detection technology is lacking. Thus, this review provides a comprehensive summary of recent analytical detection technology research on CAs published between 2017 and 2022. The advantages and limitations of relevant methods including efficient pretreatment technologies for biological matrices and analytical methods used in combination with pretreatment technology have been discussed. Overall, this review article provides a better understanding of the importance of accurate CAs measurement and offers perspectives on the development of novel methods for disease diagnosis and research in this field.

Dendrimer-Gold Nanocomposite-Based Electrochemical Aptasensor for the Detection of Dopamine

Dopamine is an important neurotransmitter and biomarker that plays a vital role in our neurological system and body. Thus, it is important to monitor the concentration levels of dopamine in our bodies. We report an aptamer-based sensor fabricated through an electro-co-deposition of a generation 3 poly(propylene imine) (PPI) dendrimer and gold nanoparticles (AuNPs) on a glassy carbon (GC) electrode by cyclic voltammetry. Through self-assembly, a single-stranded thiolated dopamine aptamer was immobilized on the GC/PPI/AuNPs electrode to prepare an aptasensor. Voltammetry and electrochemical impedance spectroscopy (EIS) were used to characterize the modified electrodes. The readout for the biorecognition event between the aptamer and various dopamine concentrations was attained from square wave voltammetry and EIS. The aptasensor detected dopamine from the range of 10-200 nM, with a limit of detection of 0.26 and 0.011 nM from SWV and EIS, respectively. The aptasensor was selective toward dopamine when different amounts of epinephrine and ascorbic acid were present. The aptasensor was applicable in a more complex matrix of human serum.

Vancomycin-Stabilized Platinum Nanoparticles with Oxidase-like Activity for Sensitive Dopamine Detection

The development of efficient, reliable, and sensitive dopamine detection methods has attracted much attention. In this paper, vancomycin-stabilized platinum nanoparticles (Van-Ptn NPs, n = 0.5, 1, 2) were prepared by the biological template method, where n represented the molar ratio of vancomycin to Pt. The results show that Van-Pt2 NPs had oxidase-like activity and peroxidase-like activity, and the mechanism was due to the generation of reactive oxygen 1O2 and OH. Van-Pt2 NPs exhibited good temperature stability, storage stability, and salt solution stability. Furthermore, Van-Pt2 NPs had almost no cytotoxicity to A549 cells. More importantly, the colorimetric detection of DA in human serum samples was performed based on the oxidase-like activity of Van-Pt2 NPs. The linear range of DA detection was 10-700 μM, and the detection limit was 0.854 μM. This study establishes a rapid and reliable method for the detection of dopamine and extends the application of biosynthetic nanoparticles in the field of biosensing.

From Enzymatic Dopamine Biosensors to OECT Biosensors of Dopamine

Neurotransmitters are an important category of substances used inside the nervous system, whose detection with biosensors has been seriously addressed in the last decades. Dopamine, a neurotransmitter from the catecholamine family, was recently discovered to have implications for cardiac arrest or muscle contractions. In addition to having many other neuro-psychiatric implications, dopamine can be detected in blood, urine, and sweat. This review highlights the importance of biosensors as influential tools for dopamine recognition. The first part of this article is related to an introduction to biosensors for neurotransmitters, with a focus on dopamine. The regular methods in their detection are expensive and require high expertise personnel. A major direction of evolution of these biosensors has expanded with the integration of active biological materials suitable for molecular recognition near electronic devices. Secondly, for dopamine in particular, the miniaturized biosensors offer excellent sensitivity and specificity and offer cheaper detection than conventional spectrometry, while their linear detection ranges from the last years fall exactly on the clinical intervals. Thirdly, the applications of novel nanomaterials and biomaterials to these biosensors are discussed. Older generations, metabolism-based or enzymatic biosensors, could not detect concentrations below the micro-molar range. But new generations of biosensors combine aptamer receptors and organic electrochemical transistors, OECTs, as transducers. They have pushed the detection limit to the pico-molar and even femto-molar ranges, which fully correspond to the usual ranges of clinical detection of human dopamine in body humors that cover 0.1 ÷ 10 nM. In addition, if ten years ago the use of natural dopamine receptors on cell membranes seemed impossible for biosensors, the actual technology allows co-integrate transistors and vesicles with natural receptors of dopamine, like G protein-coupled receptors. The technology is still complicated, but the uni-molecular detection selectivity is promising.

Advances in MXene-Based Electrochemical (Bio)Sensors for Neurotransmitter Detection

Neurotransmitters are chemical messengers that play an important role in the nervous system's control of the body's physiological state and behaviour. Abnormal levels of neurotransmitters are closely associated with some mental disorders. Therefore, accurate analysis of neurotransmitters is of great clinical importance. Electrochemical sensors have shown bright application prospects in the detection of neurotransmitters. In recent years, MXene has been increasingly used to prepare electrode materials for fabricating electrochemical neurotransmitter sensors due to its excellent physicochemical properties. This paper systematically introduces the advances in MXene-based electrochemical (bio)sensors for the detection of neurotransmitters (including dopamine, serotonin, epinephrine, norepinephrine, tyrosine, NO, and H₂S), with a focus on their strategies for improving the electrochemical properties of MXene-based electrode materials, and provides the current challenges and future prospects for MXene-based electrochemical neurotransmitter sensors.

Single-Site SnOCu Pairs with Interfacial Electron Transfer Effect for Enhanced Electrochemical Catalysis and Sensing

As advanced electrochemical catalysts, single-atom catalysts have made great progress in the field of catalysis and sensing due to their high atomic utilization efficiency and excellent catalytic performance. Herein, stannum-doped copper oxide (CuOSn₁ ) nanosheets with single-site SnOCu pairs as active sites are synthesized as electrocatalysts for biological molecule detection. Compared with CuO-based electrochemical sensors, the CuOSn₁ -based electrochemical sensors have improved detection sensitivity with a rapid electrochemical response. Theoretical calculation reveals that the single-site SnOCu pairs induced interfacial electronic transfer effect can strengthen hydroxy adsorption and thus reduce the energy barrier of the biological molecule oxidation process. As a concept application, electrochemical detection of dopamine and uric acid molecules is achieved, exhibiting satisfactory sensitivity and selectivity. This work demonstrates the advantages of single-site SnOCu pairs in electrochemical catalysis and sensing, which provides theoretical guidance for understanding the structure-activity relationship for sensitive electrochemical sensing.

Electrochemical preparation and the characterizations of poly(3,5-diamino 1,2,4-triazole) film for the selective determination of pyridoxine in pharmaceutical formulations

This work describes the synthesis and characterization of a polymeric film of 3,5-diamino 1,2,4-triazole on a pencil graphite electrode for the selective sensing of pyridoxine (PY). The PGE was modified using the electropolymerization process by the potentiodynamic method. The polymerized electrode (PDAT/PGE) was characterized by IR, SEM, AFM, cyclic voltammetry, and electrochemical impedance spectroscopy. PY undergoes irreversible oxidation at 0.79 V on PDAT/PGE in phosphate buffer of pH 5. Using the differential pulse voltammetric technique (DPV), PY showed a linear range from 5 to 950 μM with a lower detection limit of 2.96 μM. The PDAT/PGE was applied for the analytical determination of PY in pharmaceutical tablets with good recovery.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s11696-023-02777-5.

Growth Control of Metal-Organic Framework Films on Marine Biological Carbon and Their Potential-Dependent Dopamine Sensing

Ever-evolving advancements in films have fueled many of the developments in the field of electrochemical sensors. For biosensor application platforms, the fabrication of metal-organic framework (MOF) films on microscopically structured substrates is of tremendous importance. However, fabrication of MOF film-based electrodes always exhibits unsatisfactory performance, and the mechanisms of the fabrication and sensing application of the corresponding composites also need to be explored. Here, we report the fabrication of conformal MIL-53 (Fe) films on carbonized natural seaweed with the assistance of an oxide nanomembrane and a potential-dependent electrochemical dopamine (DA) sensor. The geometry and structure of the composite can be conveniently tuned by the experimental parameters, while the sensing performance is significantly influenced by the applied potential. The obtained sensor demonstrates ultrahigh sensitivity, a wide linear range, a low limit of detection, and a good distinction between DA and ascorbic acid at an optimized potential of 0.3 V. The underneath mechanism is investigated in detail with the help of theoretical calculations. This work bridges the natural material and MOF films and is promising for future biosensing applications.

Highly Sensitive and Selective Dopamine Determination in Real Samples Using Au Nanoparticles Decorated Marimo-like Graphene Microbead-Based Electrochemical Sensors

A sensitive and selective electrochemical dopamine (DA) sensor has been developed using gold nanoparticles decorated marimo-like graphene (Au NP/MG) as a modifier of the glassy carbon electrode (GCE). Marimo-like graphene (MG) was prepared by partial exfoliation on the mesocarbon microbeads (MCMB) through molten KOH intercalation. Characterization via transmission electron microscopy confirmed that the surface of MG is composed of multi-layer graphene nanowalls. The graphene nanowalls structure of MG provided abundant surface area and electroactive sites. Electrochemical properties of Au NP/MG/GCE electrode were investigated by cyclic voltammetry and differential pulse voltammetry techniques. The electrode exhibited high electrochemical activity towards DA oxidation. The oxidation peak current increased linearly in proportion to the DA concentration in a range from 0.02 to 10 μM with a detection limit of 0.016 μM. The detection selectivity was carried out with the presence of 20 μM uric acid in goat serum real samples. This study demonstrated a promising method to fabricate DA sensor-based on MCMB derivatives as electrochemical modifiers.

Cell viability and drug evaluation biosensing system based on disposable AuNPs/MWCNT nanocomposite modified screen-printed electrode for exocytosis dopamine detection

Cell viability, as an important index to evaluate drug effects, usually was measured by tetrazolium colorimetric assay, playing a key role in drug development and drug screening. Tedious operating procedures, unsatisfactory sensitivity and abominable environments perplex researchers to acquire more detailed in vivo-relevant biological information. Herein, a simple and low-cost cell viability and drug evaluation biosensing system-based on multiwalled carbon nanotubes, gold nanoparticles and Nafion modified screen-printed electrode (SPE) biosensor was constructed for detection of dopamine (DA) released from living cells to evaluate cytotoxicity of antineoplastic drugs such as cisplatin and resveratrol. The biosensing system was demonstrated to display exceptional selectivity, excellent flexibility and good stability toward DA measurement in complex bio-samples. Additionally, the satisfactory recoveries of DA in real samples revealed the reliability and accuracy of the biosensing system in practical application. The IC₅₀ curves respectively obtained by the biosensing system and tetrazolium colorimetric assay provided similar IC₅₀ value but distinctly different dose-effect relationship, which confirmed the enormous potential of the biosensor in cell viability and described drug efficacy profiles in cell function. In short, the cell viability and drug evaluation system using SPE biosensor paves a new way in drug screening and pharmaceutical application to measure bioactive molecule such as DA.

Wireless, Battery-Free Implants for Electrochemical Catecholamine Sensing and Optogenetic Stimulation

Neurotransmitters and neuromodulators mediate communication between neurons and other cell types; knowledge of release dynamics is critical to understanding their physiological role in normal and pathological brain function. Investigation into transient neurotransmitter dynamics has largely been hindered due to electrical and material requirements for electrochemical stimulation and recording. Current systems require complex electronics for biasing and amplification and rely on materials that offer limited sensor selectivity and sensitivity. These restrictions result in bulky, tethered, or battery-powered systems impacting behavior and that require constant care of subjects. To overcome these challenges, we demonstrate a fully implantable, wireless, and battery-free platform that enables optogenetic stimulation and electrochemical recording of catecholamine dynamics in real time. The device is nearly 1/10th the size of previously reported examples and includes a probe that relies on a multilayer electrode architecture featuring a microscale light emitting diode (μ-LED) and a carbon nanotube (CNT)-based sensor with sensitivities among the highest recorded in the literature (1264.1 nA μM-1 cm-2). High sensitivity of the probe combined with a center tapped antenna design enables the realization of miniaturized, low power circuits suitable for subdermal implantation even in small animal models such as mice. A series of in vitro and in vivo experiments highlight the sensitivity and selectivity of the platform and demonstrate its capabilities in freely moving, untethered subjects. Specifically, a demonstration of changes in dopamine concentration after optogenetic stimulation of the nucleus accumbens and real-time readout of dopamine levels after opioid and naloxone exposure in freely behaving subjects highlight the experimental paradigms enabled by the platform.

Dual-Nanopipettes for the Detection of Single Nanoparticles and Small Molecules

Nanopore sensing is blooming due to its label-free and high sensitivity features. As a novel nanopore, a droplet is formed at the orifice of a dual-nanopipette, which allows for the translocation of analytes through the two channels at a relatively low speed and the promotion of signal-to-noise ratio. However, nanopore sensing based on the principle of current blockage requires the pore size to be comparable to that of the single entity, which poses a huge challenge for the direct detection of small molecules. In this work, gold nanoparticles (Au NPs) modified with sulfhydryl poly(ethylene glycol) (PEG-SH) or aptamers were detected successfully. The size difference of Au NPs and the interaction between Au NPs and dual-nanopipettes could be distinguished sensitively. Furthermore, Au NPs modified with designed aptamers will produce different blocking current after capturing the corresponding small molecules (e.g., dopamine and serotonin). Even non-electroactive ions, such as potassium ions, can also be detected, which is difficult to sense based on redox reactions, and further illustrates that the change of surface properties of nanoparticles is responsible for the detection. This work expands the application of nanopipette sensing for Au NPs and provides a universal platform for the small-molecule detection, which has the potential application in biosensing.

Reactive argon-plasma activation of screen-printed carbon electrodes for highly selective dopamine determination

Dopamine (DA) deficiency has been linked to several psychiatric disorders. Electrochemical determination of the level of DA suffers from abundant ascorbic acid (AA) and uric acid (UA) in body fluids. In this work, a facile argon (Ar) plasma treatment was utilized to enhance the electrocatalytic reactivity of screen-printed carbon electrodes (SPCEs) for selective DA detection. Surface characterization of the Ar-treated SCPEs verified that the carbon paste binders were successfully removed and single-bonded oxygenated moieties (-OH and C-O-C) were generated. Interestingly, the sharper D* and D'' Raman interbands were new key evidence of a higher exposure of carbon defect sites. Electrochemical studies further revealed that the Ar-treated SPCEs possessed faster heterogeneous electron-transfer rates, larger electroactive surface areas, and much higher conductivity when compared with untreated electrodes. As a result, the oxidation potentials of AA, DA, and UA in the mixture could be well-resolved and the current responses were significantly increased. The selective determination of DA in the presence of AA and UA by differential pulse voltammetry gave two linear responses with the limit of detection of 0.27 μM (0.15-10 μM range). Moreover, this Ar-treated SPCE had high reproducibility and good storage stability. These results suggest that Ar-plasma treatment could be a promising method to enhance the electrocatalytic properties of SPCEs for the detection of biomolecules.

Design of optoelectrodes for the remote imaging of cells and in situ electrochemical detection of neurosecretory events

Optical fibers have opened avenues for remote imaging, bioanalyses and recently optogenetics. Besides, miniaturized electrochemical sensors have offered new opportunities in sensing directly redox neurotransmitters. The combination of both optical and electrochemical approaches was usually performed on the platform of microscopes or within microsystems. In this work, we developed optoelectrodes which features merge the advantages of both optical fibers and microelectrodes. Optical fiber bundles were modified at one of their extremity by a transparent ITO deposit. The electrochemical responses of these ITO-modified bundles were characterized for the detection of dopamine, epinephrine and norepinephrine. The analytical performances of the optoelectrodes were equivalent to the ones reported for carbon microelectrodes. The remote imaging of model neurosecretory PC12 cells by optoelectrodes was performed upon cell-staining with common fluorescent dyes: acridine orange and calcein-AM. An optoelectrode placed by micromanipulation at a few micrometers-distance from the cells offered remote images with single cell resolution. Finally, in situ electrochemical sensing was demonstrated by additions of K⁺-secretagogue solutions near PC12 cells under observation, leading to exocytotic events detected as amperometric spikes at the ITO surface. Such dual sensors should pave the way for in vivo remote imaging, optogenetic stimulation, and simultaneous detection of neurosecretory activities.

Studies of Monoamine Neurotransmitters at Nanomolar Levels Using Carbon Material Electrodes: A Review

Neurotransmitters (NTs) with hydroxyl groups can now be identified electrochemically, utilizing a variety of electrodes and voltammetric techniques. In particular, in monoamine, the position of the hydroxyl groups might alter the sensing properties of a certain neurotransmitter. Numerous research studies using electrodes modified on their surfaces to better detect specific neurotransmitters when other interfering factors are present are reviewed to improve the precision of these measures. An investigation of the monoamine neurotransmitters at nanoscale using electrochemical methods is the primary goal of this review article. It will be used to determine which sort of electrode is ideal for this purpose. The use of carbon materials, such as graphite carbon fiber, carbon fiber micro-electrodes, glassy carbon, and 3D printed electrodes are only some of the electrodes with surface modifications that can be utilized for this purpose. Electrochemical methods for real-time detection and quantification of monoamine neurotransmitters in real samples at the nanomolar level are summarized in this paper.

A sensitive photoluminescent sensor based on highly charged monoruthenium(II) complexes for dopamine detection

A sensitive and selective photoluminescent sensor based on the highly charged monoruthenium(II) complex was designed to detect dopamine (DA) in aqueous samples. Two novel highly charged cationic ruthenium(II) complexes [Ru(bpy)₂(bpy-N)]X₄ (bpy = 2,2'-bipyridine, bpy-N = 4,4'-bis[N,N,N-triethyl-(methylamino)]-2,2'-bipyridine, X^- = [PF₆]^- (1a) or Cl^- (1b) and [Ru(bpy)(bpy-N)₂]X₆ (X^- = [PF₆]^- (2a) or Cl^-(2b)) can be assembled with anionic surfactant sodium dodecylbenzene sulfonate (SDBS), leading to an enhancement of photoluminescence intensity. Upon addition of DA to the system, the photoluminescence intensity of the assembled system was quenched due to the energy transfer effect. It exhibited a wide linear range (0.1-50 μM) and low detection limit (10 nM). The sensor demonstrated a high selectivity toward DA, especially in the presence of adrenaline (Adr) and norepinephrine (NE), whose structures are similar to DA in biological systems. With the merits of simple operation, obvious phenomenon and fast response speed, the sensor had a potential application prospect in human urine sample.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Upcycling fruit peel waste into a green reductant to reduce graphene oxide for fabricating an electrochemical sensing platform for sulfamethoxazole determination in aquatic environments

Fruit and vegetable wastes contribute to a substantial proportion of global food waste. While these wastes could potentially be repurposed for a wide range of applications, the majority of them are discarded without effective utilization. To address the current challenges of fruit waste accumulation and sustainable nanomaterial synthesis, natural reductants derived from discarded dragon fruit (Hylocereus polyrhizus) peels are proposed as an alternative to conventional hazardous reductants for graphene-based material synthesis. Given that the chemical reduction of graphene oxide (GO) is the major route for graphene production, the effectiveness of the proposed reductants derived from peels of dragon fruit on graphene oxide reduction was evaluated. The reducing constituents (i.e., betanin substances) were recovered from dragon fruit peel wastes using facile aqueous extraction processes, where suitable extraction treatments (e.g., pH conditions) were found to be critical for boosting the reducing power of the obtained reductants. The compiled results indicated that the proposed fruit waste-derived reducing agents demonstrated great promise for GO reduction through S_N2 nucleophilic reactions, mainly driven by the extracted betanin. The obtained reduced GO serves as a promising platform for electrochemical determination of sulfamethoxazole in aquatic environments, realizing both food waste valorization and environmentally benign material synthesis.

Electrochemical sensor based on Ti3C2 membrane doped with UIO-66-NH2 for dopamine

A Ti₃C₂ membrane was prepared by doping UIO-66-NH₂ with Ti₃C₂ through hydrogen bonds. When the doping mass ratio of Ti₃C₂ and UIO-66-NH₂ was 6:1, the electrochemical performance was optimal. Characterization was done by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical impedance spectroscopy (EIS) which exhibited hierarchical cave-like physiognomy, large specific area, outstanding electronic conductive network, and excellent film-forming property. Moreover, the Ti₃C₂ film was analyzed via atomic force microscopy (AFM), which displayed good mechanical properties and rough surface morphology. The fabricated Ti₃C₂ membrane/GCE sensor was applied to the detection of dopamine (working potential of + 0.264 V vs. Ag/AgCl) with LOD of 0.81 fM and a sensitivity of 14.72 µA fM⁻¹ cm⁻². It was demonstrated that the Ti₃C₂ membrane can be used to construct nonenzymatic sensors with excellent performance. The fabricated sensor has high selectivity and stability and has good practicability with recoveries of 101.2–103.5% and a relative standard deviation (RSD) of 1.2–2.4%.

Electrochemical Methods for the Analysis of Milk

The milk and dairy industries are some of the most profitable sectors in many countries. This business requires close control of product quality and continuous testing to ensure the safety of the consumers. The potential risk of contaminants or degradation products and undesirable chemicals necessitates the use of fast, reliable detection tools to make immediate production decisions. This review covers studies on the application of electrochemical methods to milk (i.e., voltammetric and amperometric) to quantify different analytes, as reported over the last 10 to 15 years. The review covers a wide range of analytes, including allergens, antioxidants, organic compounds, nitrogen- and aldehyde containing compounds, biochemicals, heavy metals, hydrogen peroxide, nitrite, and endocrine disruptors. The review also examines pretreatment procedures applied to milk samples and the use of novel sensor materials. Final perspectives are provided on the future of cost-effective and easy-to-use electrochemical sensors and their advantages over conventional methods.

Bottom-Up Evolution of Diamond-Graphite Hybrid Two-Dimensional Nanostructure: Underlying Picture and Electrochemical Activity

The diamond-graphite hybrid thin film with low-dimensional nanostructure (e.g., nitrogen-included ultrananocrystalline diamond (N-UNCD) or the alike), has been employed in many impactful breakthrough applications. However, the detailed picture behind the bottom-up evolution of such intriguing carbon nanostructure is far from clarified yet. Here, the authors clarify it, through the concerted efforts of microscopic, physical, and electrochemical analyses for a series of samples synthesized by hot-filament chemical vapor deposition using methane-hydrogen precursor gas, based on the hydrogen-dependent surface reconstruction of nanodiamond and on the substrate-temperature-dependent variation of the growth species (atomic hydrogen and methyl radical) concentration near substrate. The clarified picture provides insights for a drastic enhancement in the electrochemical activities of the hybrid thin film, concerning the detection of important biomolecule, that is, ascorbic acid, uric acid, and dopamine: their limits of detections are 490, 35, and 25 nm, respectively, which are among the best of the all-carbon thin film electrodes in the literature. This work also enables a simple and effective way of strongly enhancing AA detection.

DNA Origami-Templated Bimetallic Nanostar Assemblies for Ultra-Sensitive Detection of Dopamine

The abundance of hotspots tuned via precise arrangement of coupled plasmonic nanostructures highly boost the surface-enhanced Raman scattering (SERS) signal enhancements, expanding their potential applicability to a diverse range of applications. Herein, nanoscale assembly of Ag coated Au nanostars in dimer and trimer configurations with tunable nanogap was achieved using programmable DNA origami technique. The resulting assemblies were then utilized for SERS-based ultra-sensitive detection of an important neurotransmitter, dopamine. The trimer assemblies were able to detect dopamine with picomolar sensitivity, and the assembled dimer structures achieved SERS sensitivity as low as 1 fM with a limit of detection of 0.225 fM. Overall, such coupled nanoarchitectures with superior plasmon tunability are promising to explore new avenues in biomedical diagnostic applications.

Ultrasensitive electrochemical biosensors for dopamine and cholesterol: recent advances, challenges and strategies

The rapid and accurate determination of the dopamine (neurotransmitter) and cholesterol level in bio-fluids is significant because they are crucial bioanalytes for several lethal diseases, which require early diagnosis. The level of DA in the brain is modulated by the dopamine active transporter (DAT), and is influenced by cholesterol levels in the lipid membrane environment. Accordingly, electrochemical biosensors offer rapid and accurate detection and exhibit unique features such as low detection limits even with reduced volumes of analyte, affordability, simple handling, portability and versatility, making them appropriate to deal with augmented challenges in current clinical and point-of-care diagnostics for the determination of dopamine (DA) and cholesterol. This feature article focuses on the development of ultrasensitive electrochemical biosensors for the detection of cholesterol and DA for real-time and onsite applications that can detect targeted analytes with reduced volumes and sub-picomolar concentrations with quick response times. Furthermore, the development of ultrasensitive biosensors via cost-effective, simple fabrication procedures, displaying high sensitivity, selectivity, reliability and good stability is significant in the impending era of electrochemical biosensing. Herein, we emphasize on recent advanced nanomaterials used for the ultrasensitive detection of DA and cholesterol and discuss in depth their electrochemical activities towards ultrasensitive responses. Key points describing future perspectives and the challenges during detection with their probable solutions are discussed, and the current market is also surveyed. Further, a comprehensive review of the literature indicates that there is room for improvement in the miniaturization of cholesterol and dopamine biosensors for lab-on-chip devices and overcoming the current technical limitations to facilitate full utilization by patients at home.

Electrochemical detection of dopamine with negligible interference from ascorbic and uric acid by means of reduced graphene oxide and metals-NPs based electrodes

Dopamine is an important neurotransmitter involved in many human biological processes as well as in different neurodegenerative diseases. Monitoring the concentration of dopamine in biological fluids, i.e., blood and urine is an effective way of accelerating the early diagnosis of these types of diseases. Electrochemical sensors are an ideal choice for real-time screening of dopamine as they can achieve fast, portable inexpensive and accurate measurements. In this work, we present electrochemical dopamine sensors based on reduced graphene oxide coupled with Au or Pt nanoparticles. Sensors were developed by co-electrodeposition onto a flexible substrate, and a systematic investigation concerning the electrodeposition parameters (concentration of precursors, deposition time and potential) was carried out to maximize the sensitivity of the dopamine detection. Square wave voltammetry was used as an electrochemical technique that ensured a high sensitive detection in the nM range. The sensors were challenged against synthetic urine in order to simulate a real sample detection scenario where dopamine concentrations are usually lower than 600 nM. Our sensors show a negligible interference from uric and ascorbic acids which did not affect sensor performance. A wide linear range (0.1-20 μm for gold nanoparticles, 0.1-10 μm for platinum nanoparticles) with high sensitivity (6.02 and 7.19 μA μM^-1 cm^-2 for gold and platinum, respectively) and a low limit of detection (75 and 62 nM for Au and Pt, respectively) were achieved. Real urine samples were also assayed, where the concentrations of dopamine detected aligned very closely to measurements undertaken using conventional laboratory techniques. Sensor fabrication employed a cost-effective production process with the possibility of also being integrated into flexible substrates, thus allowing for the possible development of wearable sensing devices.