Immunochemical techniques for multianalyte analysis of chemical residues in food and the environment: A review

Antibody-Bridged DNAzyme Walker for Sensitive Detection of Small Molecules

Sensitive detection of small molecules with biological and environmental interests is important for many applications, such as food safety, disease diagnosis, and environmental monitoring. Herein, we propose a highly selective antibody-bridged DNAzyme walker to sensitively detect small molecules. The antibody-bridged DNAzyme walker consists of a track, small-molecule-labeled DNAzyme walking strand, and antibody against small molecules. The track is built by co-modifying fluorophore-labeled substrates and small-molecule-labeled DNA linkers onto a gold nanoparticle (AuNP). In the absence of the target molecule, the antibody binds small molecule labels at the DNAzyme walking strand and the DNA linker, driving the DNAzyme walking strand on the surface of the AuNP. The attached DNAzyme walking strand moves along the track and cleaves substrates to generate high fluorescence signals to achieve signal amplification. As target molecules exist, they competitively bind with antibody to displace the small-molecule-labeled linker and DNAzyme walking strand, rendering the DNAzyme walker inactive in substrate cleavage and causing weak fluorescence. By using this antibody-bridged DNAzyme walker, we achieved sensitive detection of two biologically important small molecules, digoxin and folic acid. This work provides a new paradigm by combining the signal amplification strategy of a DNA walker and immunorecognition for sensitive and selective detection of small molecules.

A Ratiometric Biosensor Containing Manganese Dioxide Nanosheets and Nitrogen-Doped Quantum Dots for 2,4-Dichlorophenoxyacetic Acid Monitoring

Nanomaterials are desirable for sensing applications. Therefore, MnO2 nanosheets and nitrogen-doped carbon dots (NCDs) were used to construct a ratiometric biosensor for quantification of 2,4-dichlorophenoxyacetic acid. The MnO2 nanosheets drove the oxidation of colorless o-phenylenediamine to OPDox, which exhibits fluorescence emission peaks at 556 nm. The fluorescence of OPDox was efficiently quenched and the NCDs were recovered as the ascorbic acid produced by the hydrolyzed alkaline phosphatase (ALP) substrate increased. Owing to the selective inhibition of ALP activity by 2,4-D and the inner filter effect, the fluorescence intensity of the NCDs at 430 nm was suppressed, whereas that at 556 nm was maintained. The fluorescence intensity ratio was used for quantitative detection. The linear equation was F = 0.138 + 3.863·C 2,4-D (correlation coefficient R2 = 0.9904), whereas the limits of detection (LOD) and quantification (LOQ) were 0.013 and 0.040 μg/mL. The method was successfully employed for the determination of 2,4-D in different vegetables with recoveries of 79%~105%. The fluorescent color change in the 2,4-D sensing system can also be captured by a smartphone to achieve colorimetric detection by homemade portable test kit.

Highly Sensitive Magnetic-Nanoparticle-Based Immunochromatography Assay for Rapid Detection of Amantadine in Chicken and Eggs

Amantadine (AMD) is an antiviral drug that is prohibited for use in livestock and poultry. In this study, carboxyl-modified magnetic nanoparticles (MNPs) were synthesized using the solvothermal method in one step with harmless and inexpensive regents, and they were used to label monoclonal antibodies (mAbs) of AMD in microwells with electrostatic adsorption. Then, a magnetic immunochromatography assay (MICA) method was successfully established. Under optimal conditions, the MICA showed a good performance, with a linear range of 0.2~10.0 µg/L. The limit of detection (LOD) was 0.068 µg/L with the instrument, and the visual LOD (vLOD) was 0.5 µg/L. There was no cross-reaction with rimantadine and ribavirin. The vLOD in real samples was 1.0 µg/kg. The developed MICA has the advantages of convenience, speed, and sensitivity, which make it suitable for the on-site rapid detection of AMD residues in chicken tissues and eggs.

Mobile Point-of-Care Device Using Molecularly Imprinted Polymer-Based Chemosensors Targeting Interleukin-1β Biomarker

Molecularly imprinted polymers (MIPs) have garnered significant attention as a promising material for engineering specific biological receptors with superior chemical complementarity to target molecules. In this study, we present an electrochemical biosensing platform incorporating MIP films for the selective detection of the interleukin-1β (IL-1β) biomarker, particularly suitable for mobile point-of-care testing (POCT) applications. The IL-1β-imprinted biosensors were composed of poly(eriochrome black T (EBT)), including an interlayer of poly(3,4-ethylene dioxythiophene) and a 4-aminothiophenol monolayer, which were electrochemically polymerized simultaneously with template proteins (i.e., IL-1β) on custom flexible screen-printed carbon electrodes (SPCEs). The architecture of the MIP films was designed to enhance the sensor sensitivity and signal stability. This approach involved a straightforward sequential-electropolymerization process and extraction for leaving behind cavities (i.e., rebinding sites), resulting in the efficient production of MIP-based biosensors capable of molecular recognition for selective IL-1β detection. The electrochemical behaviors were comprehensively investigated using cyclic voltammograms and electrochemical impedance spectroscopy responses to assess the imprinting effect on the MIP films formed on the SPCEs. In line with the current trend in in vitro diagnostic medical devices, our simple and effective MIP-based analytical system integrated with mobile POCT devices offers a promising route to the rapid detection of biomarkers, with particular potential for periodontitis screening.

Determination of niclosamide and its two metabolites in fish by molecularly imprinted microsphere-based pseudo-ELISA

Niclosamide is usually used for the treatment of parasite infections in animals. However, niclosamide and one of its metabolites 2-chloro-4-nitroaniline are mutagenic substances, and their residues in animal-derived foods are potential risks to consumers. As far as we know, there has been no immunoassay or pseudo immunoassay reported to determine niclosamide and its metabolites in animal-derived foods. In this study, a molecularly imprinted microsphere for niclosamide was first synthesized, and a streptavidin-horseradish peroxidase labelled conjugate was also synthesized. The two reagents were used to develop a pseudo enzyme-linked immunosorbent assay on conventional microplates for the determination of niclosamide and its two metabolites (2-chloro-4-nitroaniline and 5-chlorosalicylic acid) in fish. Because biotinylated horseradish peroxidase was used to amplify the signal, the method sensitivities for the three analytes were increased fivefold to 27.5-fold (limits of detection of 0.004-0.03 ng/mL) in comparison with the use of single horseradish peroxidase labelled conjugate (limits of detection of 0.11-0.16 ng/mL). Their recoveries from the standards fortified blank fish samples were in the range of 70.6-95.5%. This is the first study reporting a molecularly imprinted polymer-based pseudo immunoassay for screening of niclosamide and its metabolites in food sample.

Evolution of a natural TetR protein and development of a Fe3O4 assisted semi-homogeneous fluorescent method for determination of tetracyclines in milk

Compared with antibody, the recognition spectrum of a receptor is broader, and its recognition ability can be improved using simple mutagenesis technique. Compared with conventional immunoassay, the magnetic bead based immunoassay is simpler and can be recycled. Compared with colorimetric and luminescent immunoassays, fluoroimmunoassay is simpler because it does not require a substrate. So a method combines these merits is desirable. In this study, two amino acids in the binding pocket of a natural Escherichia coli TetR protein were mutated to produce a mutant, and the molecular docking showed the binding energies and the numbers of contact acid for 10 tetracyclines all increased. The mutant was coupled with Fe3O4 to synthesize a magnetic complex, and a fluorescent tracer was synthesized by coupling quantum dot and minocycline with bovine serum albumin. Under the assistance of 96-well bottom magnet, a semi-homogeneous method based on the two materials was developed on conventional microplate for determination of the 10 tetracyclines in milk. Results showed once assay was finished within 20 min, the limits of detection (drug concentration showing 10% inhibition) for the 10 drugs were in the range of 0.32-0.94 ng/mL, and the magnetic complex could be regenerated for 6 times. Furthermore, the sensitivities were improved for 4-6 folds in comparison with the use of natural TetR. Therefore, this method is simple, sensitive, time-saving and recyclable, and it can be used for routine screening of the 10 tetracyclines in milk.

A rapid abiotic/biotic hybrid sandwich detection for trace pork adulteration in halal meat extract

In this study, we prepared molecularly imprinted polymer nanogels with good affinity for the Fc domain of immunoglobulin G (IgG) using 4-(2-methacrylamidoethylaminomethyl) phenylboronic acid as a modifiable functional monomer for post-imprinting in-cavity modification of a fluorescent dye (F-Fc-MIP-NGs). A novel nanogel-based biotic/abiotic hybrid sandwich detection system for porcine serum albumin (PSA) was developed using F-Fc-MIP-NGs as an alternative to a secondary antibody for fluorescence detection and another molecularly imprinted polymer nanogel capable of recognizing PSA (PSA-MIP-NGs) as a capturing artificial antibody, along with a natural antibody toward PSA (Anti-PSA) that was used as a primary antibody. After incubation of PSA and Anti-PSA with F-Fc-MIP-NGs, the PSA/Anti-PSA/F-Fc-MIP-NGs complex was captured by immobilized PSA-MIP-NGs for fluorescence measurements. The analysis time was less than 30 min for detecting pork adulteration of 0.01 wt% in halal beef and lamb meats. The detection limit was comparable to that of frequently used immunoassays. Therefore, we believe that this method is a promising, sensitive, and rapid detection method for impurities in real samples and could be a simple, inexpensive, and rapid alternative to conventional methods that have cumbersome procedures of 4 hours or more.

An Extremely Highly Sensitive ELISA in pg mL-1 Level Based on a Newly Produced Monoclonal Antibody for the Detection of Ochratoxin A in Food Samples

In this study, an extremely highly sensitive enzyme-linked immunosorbent assay (ELISA) based on a newly produced monoclonal antibody (mAb) for the detection of ochratoxin A (OTA) in food samples was developed. OTA-Bovine serum albumin (BSA) conjugate was prepared and used as the immunogen for the production of the mAb. Among four hybridoma clones (8B10, 5C2, 9B7, and 5E11), the antibody from 8B10 displayed the highest affinity recognition for OTA. Based on the mAb (8B10), the IC50 and LOD of the ELISA for OTA were 34.8 pg mL-1 and 1.5 pg mL-1, respectively, which was 1.53~147 times lower than those in published ELISAs, indicating the ultra-sensitivity of our assay. There was no cross-reactivity of the mAb with the other four mycotoxins (AFB1, ZEN, DON, and T-2). Due to the high similarity in molecular structures among OTA, ochratoxin B (OTB), and ochratoxin C (OTC), the CR values of the mAb with OTB and OTC were 96.67% and 22.02%, respectively. Taking this advantage, the ELISA may be able to evaluate total ochratoxin levels in food samples. The recoveries of the ELISA for OTA in spiked samples (corn, wheat, and feed) were 96.5-110.8%, 89.5-94.4%, and 91.8-113.3%; and the RSDs were 5.2-13.6%, 8.2-13.0%, and 7.7-13.7% (n = 3), respectively. The spiked food samples (corn) were measured by ELISA and HPLC-FLD simultaneously. A good correlation between ELISA (x) and HPLC-FLD (y) with the linear regression equation of y = 0.918x - 0.034 (R2 = 0.985, n = 5) was obtained. These results demonstrated that the newly produced mAb-based ELISA was a feasible and ultra-sensitive analytical method for the detection of OTA in food samples.

Development of a Lateral Flow Immunoassay Based on a Highly Specific Monoclonal Antibody To Detect 4-Methylaminoantipyrine

To avoid false-positive results in immunoassays due to cross-reactivity of antibodies with structural analogues, especially metabolites of target compounds, the preparation of highly specific antibodies is crucial. Preserving the characteristic structure of a target compound when designing a hapten is important when preparing highly specific antibodies. Here, we designed a novel hapten, 4-(((1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4yl)amino)methyl)benzoic acid, named AA-BA, to improve the specificity of antibodies for detection of 4-methylaminoantipyrine (MAA), a residual marker of dipyrone, an important antipyretic-analgesic and anti-inflammatory drug. The structural features of the hapten remained almost the same as those of MAA. After experimental validation, monoclonal antibody 6A4 (mAb 6A4) was prepared with the half maximal inhibitory concentration (IC₅₀) value of 4.03 ng/mL and negligible cross-reactivity with dipyrone metabolites and other antibiotics. In addition, a specific lateral flow immunoassay (LFA) strip based on colloidal gold was developed for screening MAA with a cutoff value of 25 ng/mL in milk. The developed LFA is a useful tool for rapid and accurate detection of MAA.

Proteomics Methodologies: The Search of Protein Biomarkers Using Microfluidic Systems Coupled to Mass Spectrometry

Protein biomarkers have been the subject of intensive studies as a target for disease diagnostics and monitoring. Indeed, biomarkers have been extensively used for personalized medicine. In biological samples, these biomarkers are most often present in low concentrations masked by a biologically complex proteome (e.g., blood) making their detection difficult. This complexity is further increased by the needs to detect proteoforms and proteome complexity such as the dynamic range of compound concentrations. The development of techniques that simultaneously pre-concentrate and identify low-abundance biomarkers in these proteomes constitutes an avant-garde approach to the early detection of pathologies. Chromatographic-based methods are widely used for protein separation, but these methods are not adapted for biomarker discovery, as they require complex sample handling due to the low biomarker concentration. Therefore, microfluidics devices have emerged as a technology to overcome these shortcomings. In terms of detection, mass spectrometry (MS) is the standard analytical tool given its high sensitivity and specificity. However, for MS, the biomarker must be introduced as pure as possible in order to avoid chemical noise and improve sensitivity. As a result, microfluidics coupled with MS has become increasingly popular in the field of biomarker discovery. This review will show the different approaches to protein enrichment using miniaturized devices and the importance of their coupling with MS.

FRET Based Biosensor: Principle Applications Recent Advances and Challenges

Förster resonance energy transfer (FRET)-based biosensors are being fabricated for specific detection of biomolecules or changes in the microenvironment. FRET is a non-radiative transfer of energy from an excited donor fluorophore molecule to a nearby acceptor fluorophore molecule. In a FRET-based biosensor, the donor and acceptor molecules are typically fluorescent proteins or fluorescent nanomaterials such as quantum dots (QDs) or small molecules that are engineered to be in close proximity to each other. When the biomolecule of interest is present, it can cause a change in the distance between the donor and acceptor, leading to a change in the efficiency of FRET and a corresponding change in the fluorescence intensity of the acceptor. This change in fluorescence can be used to detect and quantify the biomolecule of interest. FRET-based biosensors have a wide range of applications, including in the fields of biochemistry, cell biology, and drug discovery. This review article provides a substantial approach on the FRET-based biosensor, principle, applications such as point-of-need diagnosis, wearable, single molecular FRET (smFRET), hard water, ions, pH, tissue-based sensors, immunosensors, and aptasensor. Recent advances such as artificial intelligence (AI) and Internet of Things (IoT) are used for this type of sensor and challenges.

Glucometer-based biosensor for the determination of ractopamine in animal-derived foods using rolling circle amplification

Screening for persistent organic pollutants (POPs) in food is a complex and challenging process, as POPs can be present in very low levels and can be difficult to detect. Herein, we developed an ultrasensitive biosensor based on a rolling circle amplification (RCA) platform using a glucometer to determine POP. The biosensor was constructed using gold nanoparticle probes modified with antibodies and dozens of primers, magnetic microparticle probes conjugated with haptens, and targets. After competition, RCA reactions are triggered, numerous RCA products hybridize with the ssDNA-invertase, and the target is successfully transformed into glucose. Using ractopamine as a model analyte, this strategy obtained a linear detection range of 0.038-5.00 ng mL^-1 and a detection limit of 0.0158 ng mL^-1, which was preliminarily verified by screening in real samples. Compared with conventional immunoassays, this biosensor utilizes the high efficiency of RCA and the portable properties of a glucometer, which effectively improves the sensitivity and simplifies the procedures using magnetic separation technology. Moreover, it has been successfully applied to ractopamine determination in animal-derived foods, revealing its potential as a promising tool for POP screening.

Development of epitopephore-based rational hapten design strategy: A combination of theoretical evidence and experimental validation

Antibody is the key biomolecule that governing the sensitivity and specificity of an immunoassay for chemical compound, also named hapten molecule. Obviously, predication of hapten effectiveness before chemical synthesis is beneficial to boost success, save cost and improve controllability. Here, we proposed and evaluated an epitopephore based rational hapten design (ERHD) to assist antibody production to chemical compound, combining theoretical evidence and then experimental validation by using dinitrocarbanilide (DNC) as a model analyte. Briefly, epitopephores of DNC were firstly generated by HipHop algorithm after features mapping. A homemade drug database also containing reported fragment haptens (HFR) and new designed full hapten (HFU) were constructed, and then was virtually screened by using generated epitopephore followed by structural analysis and visual inspection. The DNC haptens based on the selected hits were further identified by Density Functional Theory before total synthesis. To prove and clarify the usability of the ERHD, two retrieved HFU haptens, one non-retrieved HFU hapten and three non-retrieved HFR haptens were all selected to produce monoclonal antibodies (mAbs) for comparison purpose. A maximal 6000-fold increased affinity of mAb from retrieved HFU than HFR was observed, while, non-retrieved HFU failed to produce antibody to DNC. More importantly, mAbs from HFU haptens provided highly specificity to DNC, while, mAbs from HFR haptens could recognize 15 others analogues. We then constructed antibody structure and investigated molecular recognition of the mAbs to DNC, well supporting the rationality of the ERHD. Lastly, an icELISA was developed for DNC with an IC₅₀ value as low as 0.19 ng mL^-1 with high specificity, which has never achieved before.

Recent molecularly imprinted polymers applications in bioanalysis

Molecular imprinted polymers (MIPs) as extraordinary compounds with unique features have presented a wide range of applications and benefits to researchers. In particular when used as a sorbent in sample preparation methods for the analysis of biological samples and complex matrices. Its application in the extraction of medicinal species has attracted much attention and a growing interest. This review focus on articles and research that deals with the application of MIPs in the analysis of components such as biomarkers, drugs, hormones, blockers and inhibitors, especially in biological matrices. The studies based on MIP applications in bioanalysis and the deployment of MIPs in high-throughput settings and optimization of extraction methods are presented. A review of more than 200 articles and research works clearly shows that the superiority of MIP techniques lies in high accuracy, reproducibility, sensitivity, speed and cost effectiveness which make them suitable for clinical usage. Furthermore, this review present MIP-based extraction techniques and MIP-biosensors which are categorized on their classes based on common properties of target components. Extraction methods, studied sample matrices, target analytes, analytical techniques and their results for each study are described. Investigations indicate satisfactory results using MIP-based bioanalysis. According to the increasing number of studies on method development over the last decade, the use of MIPs in bioanalysis is growing and will further expand the scope of MIP applications for less studied samples and analytes.

Nanomaterial-Based Fluorescent Biosensor for Food Safety Analysis

Food safety issues have become a major threat to public health and have garnered considerable attention. Rapid and effective detection methods are crucial for ensuring food safety. Recently, nanostructured fluorescent materials have shown considerable potential for monitoring the quality and safety of food because of their fascinating optical characteristics at the nanoscale. In this review, we first introduce biomaterials and nanomaterials for food safety analysis. Subsequently, we perform a comprehensive analysis of food safety using fluorescent biosensors based on nanomaterials, including mycotoxins, heavy metals, antibiotics, pesticide residues, foodborne pathogens, and illegal additives. Finally, we provide new insights and discuss future approaches for the development of food safety detection, with the aim of improving fluorescence detection methods for the practical application of nanomaterials to ensure food safety and protect human health.

Simultaneous Rapid Nucleic Acid and Protein Detection in a Lateral Chromatography Chip for COVID-19 Diagnosis

In this work, we report a fast, portable, and economical microfluidic platform for the simultaneous detection of nucleic acid and proteins. Using SARS-CoV-2 as a target, this microfluidic chip enabled to simultaneously detect the SARS-CoV-2 RNA (N gene) antigen (or specific IgG antibody) with respective detection limits of 1 copy/μL for nucleic acid, 0.85 ng/mL for antigen, and 5.80 ng/mL for IgG within 30 min with high stability and anti-interference ability. The capability of this system in clinical applications was further evaluated using clinical samples, displaying 100% sensitivity and 100% specificity for COVID-19 diagnosis. These findings demonstrate the potential of this method to be used for the detection and subsequent control of pathogens.

Leveraging Nanomechanical Perturbations in Raman Spectro-Immunoassays to Design a Versatile Serum Biomarker Detection Platform

While immunoassays are pivotal to medical diagnosis and bioanalytical chemistry, the current landscape of public health has catalyzed an important shift in the requirements of immunoassays that demand innovative solutions. For example, rapid, label-free, and low-cost screening of a given analyte is required to inform the best countermeasures to combat infectious diseases in a timely manner. Yet, the current design of immunoassays cannot accommodate such requirements as constraint by accumulative challenges, such as repeated incubation and washing, and the need of two types of antibodies in the sandwich format. To provide a potential solution, herein, a plasmonic Raman immunoassay with single-antibody, multivariate regression, and shift-of-peak strategies, coined as the PRISM assay, for serum biomarkers detection, is reported. The PRISM assay relies on Raman reporter-antibody conjugates to capture analytes on a plasmonic substrate. The ensuing nanomechanical perturbations to vibration of Raman reporters induce subtle but characteristic spectral changes that encode rich information related to the captured analytes. By fusing Raman spectroscopy and chemometric analysis, both Raman frequency shift- and multivariate regression models for sensitive detection of biomarkers are developed. The PRISM assay is expected to find a wide range of applications in clinical diagnosis, food safety surveillance, and environmental monitoring.

Trace Immunosensing of Multiple Neonicotinoid Insecticides by a Novel Broad-Specific Antibody Obtained from a Rational Screening Strategy

Residues of neonicotinoid pesticides have potential risks to food, environmental and biological safety. In this study, the hapten toward imidacloprid was adopted to gain antibodies. After molecular modeling, the electrostatic potentials of eight commonly-used neonicotinoid pesticides were individually calculated to analyze the structural similarity. Two representative compounds (imidacloprid and acetamiprid) with moderate similarity were rationally selected for hybridoma screening. Using this strategy, four clones of broad-specific monoclonal antibodies (mAbs) against multiple neonicotinoids were obtained, and the clone 6F11 exhibited the broadest spectrum to six neonicotinoid pesticides and two metabolites, with half-maximal inhibitory concentrations (IC₅₀) ranging from 0.20 to 5.92 ng/mL. Then, the novel antibody gene was sequenced and successfully expressed in full-length IgG form using mammalian cells. Based on the sensitive recombinant antibody, a gold lateral-flow immunosensing strip assay was developed and it was qualified for rapid detection of imidacloprid, clothianidin or imidaclothiz residues in food samples.

Development of Cu-doped CeO2 nanospheres mimic nanozyme-based immunoassay for the specific screening of Bacillus cereus

Due to the highly similar genetic background, it is difficult to distinguish Bacillus cereus (B. cereus) with other members of B. cereus group. Herein, an antibody-based colorimetric immunoassay using Cu-doped CeO₂ nanospheres as peroxidase mimics was developed for the detection of B. cereus in food. First, monoclonal antibodies (mAbs) and polyclonal antibody (pAb) with good specificity to B. cereus were prepared and characterized. Second, the regular-shaped hollow Cu/CeO₂ nanospheres with highly catalytic activity and biocompatibility were synthesized as mimic nanozymes to capture secondary antibody. Finally, a sandwich colorimetric immunoassay for the specific and sensitive detection of B. cereus was developed, showing linear detection range from 3.2 × 10² to 1 × 10⁵ CFU/mL and a limit detection of 1.7 × 10² CFU/mL. The developed immunoassay holds great potential as an effective tool for detecting B. cereus in food poisoning.

Development of a highly sensitive and specific monoclonal antibody-based ELISA coupled with immuno-affinity extraction for the detection of anticancer drug 5-fluorouracil in blood samples

5-Fluorouracil (5-FU) is an effective anticancer drug widely used in cancer treatment. In this study, two 5-FU derivatives containing a spacer arm with the carboxylic group at the end were synthesized, which were linked to the carrier proteins to form 5-FU-protein conjugates used as the immunogens for the production of monoclonal antibody (mAb). Based on the produced mAb, the highly sensitive and specific enzyme-linked immunosorbent assay (ELISA) for 5-FU detection was established. The IC₅₀ and LOD values of the assay were found to be 19.5 ng mL^-1 and 0.5 ng mL^-1, respectively. There was no cross-reactivity (CR) of the ELISA with cytosine, thymine and uracil, which avoided the interference from inherent pyrimidines. The CR values of the assay with three substitutes of 5-FU (tegafur, 5-fluoro-2'-deoxyuridine, carmofur) were within 9.7%-17.6%. The produced mAb was also applied in sample extraction. The immuno-affinity column capable specific capturing 5-FU was prepared by immobilizing the mAb on Sepharose-4B gel and filling into a SPE column. The recoveries of 5-FU in spiked samples measured by ELISA were 72.4%-90.7% with RSD of 3.6%-8.3%. Five blood samples collected from patients were extracted by immuno-affinity column, then measured by ELISA and confirmed by HPLC-MS/MS. There was a good correlation between HPLC-MS/MS and ELISA. It is demonstrated that the developed ELISA combined with immuno-affinity extraction can be a powerful alternative method for the detection of 5-FU in blood samples.

Comparison of two fluorescence quantitative immunochromatographic assays for the detection of amantadine in chicken muscle

The two sensitive fluorescence quantitative immunochromatographic assays (FQICAs), background fluorescence quenching immunochromatographic assay (bFQICA) and time-resolved fluorescent immunochromatographic assay (TRFICA), play an important role increasingly in rapid detection technology for food safety. Amantadine (AMD), used extensively in virus infections in livestock and poultry, has been prohibited due to hazard concerns over public human health. Therefore, AMD was used as a model molecule in the FQICAs establishment and comparison based on the same bioreagents. The outstanding performance in technical parameters of the two FQICAs indicated that they could provide rapid, precise, reliable technical support for large-scale on-site screening for AMD detection. What's more, the systematic and comprehensive comparison of the two FQICAs would give useful suggestions for scientists and users in monitoring the harmful compounds.

Establishment and Comparative Analysis of Enzyme-Linked Immunoassay and Time-Resolved Fluoroimmunoassay for the Determination of Trace Quinclorac in Environment

As a common herbicide in farmland, there has been wide concern over quinclorac residue because of its potential risks to the environment and human health. For the detection and monitoring of quinclorac residue in the environment, enzyme-linked immunoassay (ELISA) and time-resolved fluoroimmunoassay (TRFIA) were established. The half-maximal inhibition concentrations (IC50) of ELISA and TRFIA were 0.169 mg/L and 0.087 mg/L with a linear range (IC20−IC80) of 0.020−1.389 mg/L and 0.004−1.861 mg/L, respectively. Compared with ELISA, the limit of detection (LOD, IC20) and IC50 of TRFIA improved approximately 5-fold and 2-fold. The cross-reaction rates for the quinclorac analogs were less than 2%. The average recoveries of quinclorac in river water, paddy water, paddy soil, and brown rice samples were 77.3−106.1%, with RSDs of 1.7−12.5%. More importantly, the results of the two methods were consistent with that of the referenced method of UPLC-MS/MS (R2 > 0.98). ELISA and TRFIA both showed good detection performance and could meet the requirements of the quantitative determination of quinclorac. Therefore, the proposed ELISA and TRFIA could be applied to the rapid and sensitive detection and monitoring of quinclorac residue in the environment.

Dual-readout fluorescence quenching immunochromatographic test strips for highly sensitive simultaneous detection of chloramphenicol and amantadine based on gold nanoparticle-triggered photoluminescent nanoswitch control

Herein, a novel fluorescence quenching immunochromatographic test strip (FQICTS) for simultaneous detection of chloramphenicol (CAP) and amantadine (AMD) was developed on the basis of inner filter effect (IFE), with the combination of gold nanoparticles (AuNPs) and highly luminescent green-emitting gold nanoclusters (AuNCs) as the IFE quencher/donor pair. The AuNPs could quench the excitation light and emission light of AuNCs and achieve a high IFE efficiency due to dual spectral overlapping. Under optimal conditions, the "turn-on" mode of the AuNCs-based dual-readout FQICTS showed good linearity for CAP detection in chicken samples from 0.05 ng/g to 10 ng/g, with a limit of detection (LOD) of 0.043 ng/g. The linear range of AMD is 0.5-50 ng/g, with LOD of 0.45 ng/g. The visual LODs of CAP and AMD in "turn-on" mode were 200 and 10 times lower than that in "turn-off" mode, respectively. The "turn-on" mode of FQICTS showed high recovery for detecting CAP (82.5-94.5%) and AMD (81.9-110.7%) spiked into chicken samples. The performance and practicability of the established method were verified with commercial enzyme-immunoassay kits, and good correlations were observed. Overall, the newly developed AuNCs-based dual-readout FQICTS is a promising on-site screening tool for rapid, high-sensitivity detection of multiple food contaminants in practical applications.

Plasmonically-enhanced competitive assay for ultrasensitive and multiplexed detection of small molecules

Novel methods that enable facile, ultrasensitive and multiplexed detection of low molecular weight organic compounds such as metabolites, drugs, additives, and organic pollutants are valuable in biomedical research, clinical diagnosis, food safety and environmental monitoring. Here, we demonstrate a simple, rapid, and ultrasensitive method for detection and quantification of small molecules by implementing a competitive immunoassay with an ultrabright fluorescent nanolabel, plasmonic fluor. Plasmonic-fluor is comprised of a polymer-coated gold nanorod and bovine serum albumin conjugated with molecular fluorophores and biotin. The synthesis steps and fluorescence emission of plasmonic-fluor was characterized by UV-vis spectroscopy, transmission electron microscopy, and fluorescence microscopy. Plasmon-enhanced competitive assay can be completed within 20 min and exhibited more than 30-fold lower limit-of-detection for cortisol compared to conventional competitive ELISA. The plasmon-enhanced competitive immunoassay when implemented as partition-free digital assay enabled further improvement in sensitivity. Further, spatially multiplexed plasmon-enhanced competitive assay enabled the simultaneous detection of two analytes (cortisol and fluorescein). This simple, rapid, and ultrasensitive method can be broadly employed for multiplexed detection of various small molecules in research, in-field and clinical settings.

Multiplex optical bioassays for food safety analysis: Toward on-site detection

Food safety analysis plays a significant role in controlling food contamination and supervision. In recent years, multiplex optical bioassays (MOBAs) have been widely applied to analyze multiple hazards due to their efficiency and low cost. However, due to the challenges such as multiplexing capacity, poor sensitivity, and bulky instrumentation, the further application of traditional MOBAs in food screening has been limited. In this review, effective strategies regarding food safety MOBAs are summarized, such as spatial-resolution modes performed in multi-T lines/dots strips or arrays of strip/microplate/microfluidic chip/SPR chip and signal-resolution modes employing distinguishable colorimetric/luminescence/fluorescence/surface plasma resonance/surface-enhanced Raman spectrum as signal tags. Following this, new trends on how to design engineered sensor architecture and exploit distinguishable signal reporters, how to improve both multiplexing capacity and sensitivity, and how to integrate these formats into smartphones so as to be mobile are summarized systematically. Typically, in the case of enhancing multiplexing capacity and detection throughput, microfluidic array chips with multichannel architecture would be a favorable approach to overcome the spatial and physical limitations of immunochromatographic assay (ICA) test strips. Moreover, noble metal nanoparticles and single-excitation, multiple-emission luminescence nanomaterials hold great potential in developing ultrasensitive MOBAs. Finally, the exploitation of innovative multiplexing strategy hybridized with powerful and widely available smartphones opens new perspectives to MOBAs. In future, the MOBAs should be more sensitive, have higher multiplexing capacity, and easier instrumentation.

Nanobody-Based Assays for the Detection of Environmental and Agricultural Contaminants

Compared with traditional polyclonal and monoclonal antibodies, nanobodies derived from camelid heavy-chain antibodies have several advantages including small size, unique structure and binding geometry, high stability, and robust expression yields in numerous systems. Nanobody-based assays can also exhibit superior performance for immunodetection. Here, we describe protocols for three nanobody-based immunoassays for the detection of small chemical contaminants in environmental or agricultural samples: enzyme-linked immunosorbent assay (ELISA), fluorescence enzyme immunoassay (FEIA), and bioluminescent enzyme immunoassay (BLEIA). These methods are based on hapten-specific nanobodies, nanobody-alkaline phosphatase fusion proteins, and nanobody-nanoluciferase fusion proteins, respectively.

A Membrane-Modulated Centrifugal Microdevice for Enzyme-Linked Immunosorbent Assay-Based Detection of Illicit and Misused Drugs

Increased opioid use and misuse have imposed large analytical demands across clinical and forensic sectors. Due to the absence of affordable, accurate, and simple on-site tests (e.g., point of interdiction and bedside), analysis is primarily conducted in centralized laboratories via time-consuming, labor-intensive methods. Many healthcare facilities do not have such analytical capabilities and must send samples to commercial laboratories, increasing turnaround time and care costs, as well as delaying public health warnings regarding the emergence of specific substances. Enzyme-linked immunosorbent assays (ELISAs) are used ubiquitously, despite lengthy workflows that require substantial manual intervention. Faster, reliable analytics are desperately needed to mitigate the mortality and morbidity associated with the current substance use epidemic. We describe one such alternative─a portable centrifugal microfluidic ELISA system that supplants repetitive pipetting with rotationally controlled fluidics. Embedded cellulosic membranes act as microvalves, permitting flow only when centrifugally generated hydraulic pressure exceeds their liquid entry pressure. These features enable stepwise reagent introduction, incubation, and removal simply by tuning rotational frequency. We demonstrate the success of this platform through sensitive, specific colorimetric detection of opiates, a subclass of opioids naturally derived from the opium poppy. Objective image analysis eliminated subjectivity in human color perception and permitted reliable detection of opiates in buffer and artificial urine at the ng/μL range. Opiates were clearly differentiated from other drug classes without interference from common adulterants known to cause false positive results in current colorimetric field tests. Eight samples were simultaneously analyzed in under 1 h, a marked reduction from the traditional multiday timeline. This approach could permit rapid, automatable ELISA-based drug detection outside of traditional laboratories by nontechnical personnel.

Enhanced Bio-Barcode Immunoassay Using Droplet Digital PCR for Multiplex Detection of Organophosphate Pesticides

A bio-barcode immunoassay based on droplet digital polymerase chain reaction (ddPCR) was developed to simultaneously quantify triazophos, parathion, and chlorpyrifos in apple, cucumber, cabbage, and pear. Three gold nanoparticle (AuNP) probes and magnetic nanoparticle (MNP) probes were prepared, binding through their antibodies with the three pesticides in the same tube. Three groups of primers, probes, templates, and three antibodies were designed to ensure the specificity of the method. Under the optimal conditions, the detection limits (expressed as IC₁₀) of triazophos, parathion, and chlorpyrifos were 0.22, 0.45, and 4.49 ng mL^-1, respectively. The linear ranges were 0.01-20, 0.1-100, and 0.1-500 ng mL^-1, and the correlation coefficients (R²) were 0.9661, 0.9834, and 0.9612, respectively. The recoveries and relative standard deviations (RSDs) were in the ranges of 75.5-98.9 and 8.3-16.7%. This study provides the first insights into the ddPCR for the determination of organophosphate pesticides. It also laid the foundation for high-throughput detection of other small molecules.

Hydrophobic Moiety of Capsaicinoids Haptens Enhancing Antibody Performance in Immunoassay: Evidence from Computational Chemistry and Molecular Recognition

We previously found that the immune response to haptens is positively correlated with molecular hydrophobicity. The antibodies used in immunoassays for capsaicinoids (CPCs) in waste oil suffer from low affinity and loose recognition to structural analogues. To address this issue, four new haptens (hapten1-4), maximally exposing the hydrophobic alkane chain (noncommon moiety of CPCs), were designed and expected to produce antibodies with high affinity and accurate recognition to CPCs based upon our findings. The assumption was first evidenced by computational chemistry and animal immunization successively. Compared with four reported haptens (hapten5-8) that expose the hydrophilic vanillyl amide moiety (common structure of CPCs and other vanillin alkaloids), antisera from hapten1-4 showed an approximately 1000-fold increase in affinity and significantly improved recognition profiles for CPCs. The molecular recognition study showed that the high affinity of the antibody from new haptens mainly originated from hydrophobic forces. An indirect competitive enzyme-linked immunosorbent assay based on a monoclonal antibody from hapten1 was developed and exhibited limits of detection as low as 0.73-3.29 μg/kg for four CPCs in oils and with insignificant cross-reactivities for other eight vanillin alkaloids, which have been never achieved in previous reports.

Changing Cross-Reactivity for Different Immunoassays Using the Same Antibodies: Theoretical Description and Experimental Confirmation

Many applications of immunoassays involve the possible presence of structurally similar compounds that bind with antibodies, but with different affinities. In this regard, an important characteristic of an immunoassay is its cross-reactivity: the possibility of detecting various compounds in comparison with a certain standard. Based on cross-reactivity, analytical systems are assessed as either high-selective (responding strictly to a specific compound) or low-selective (responding to a number of similar compounds). The present study demonstrates that cross-reactivity is not an intrinsic characteristic of antibodies but can vary for different formats of competitive immunoassays using the same antibodies. Assays with sensitive detection of markers and, accordingly, implementation at low concentrations of antibodies and modified (competing) antigens are characterized by lower cross-reactivities and are, thus, more specific than assays requiring high concentrations of markers and interacting reagents. This effect was confirmed by both mathematical modeling and experimental comparison of an enzyme immunoassay and a fluorescence polarization immunoassay of sulfonamides and fluoroquinolones. Thus, shifting to lower concentrations of reagents decreases cross-reactivities by up to five-fold. Moreover, the cross-reactivities are changed even in the same assay format by varying the ratio of immunoreactants’ concentrations and shifting from the kinetic or equilibrium mode of the antigen-antibody reaction. The described patterns demonstrate the possibility of modulating immunodetection selectivity without searching for new binding reactants.

Synthesis of molecularly imprinted microspheres and development of a fluorescence method for detection of chloramphenicol in meat

In this study, nitrobenzene was used as dummy template to synthesize a type of specific molecularly imprinted microspheres for chloramphenicol, and 4-nitroaniline was coupled with three fluorophores to synthesize three fluorescent tracers. Then a competitive fluorescence method was developed on a conventional microplate for detection of chloramphenicol in chicken and pork samples. This method contained only one sample-loading step, so one assay was finished within 30 min. The IC₅₀ was 1.8 ng/ml, and the limit of detection was 0.06 ng/g. The recoveries from chloramphenicol-fortified blank meat samples were in the range 67.5-96.2%. Furthermore, this method could be recycled three times. The detection results for some real meat samples were identical to that of a LC-MS/MS method. Therefore, this method could be used as a practical tool for routine screening for the residue of chloramphenicol in large number of meat samples.

Recent Advances on Detection of Insecticides Using Optical Sensors

Insecticides are enormously important to industry requirements and market demands in agriculture. Despite their usefulness, these insecticides can pose a dangerous risk to the safety of food, environment and all living things through various mechanisms of action. Concern about the environmental impact of repeated use of insecticides has prompted many researchers to develop rapid, economical, uncomplicated and user-friendly analytical method for the detection of insecticides. In this regards, optical sensors are considered as favorable methods for insecticides analysis because of their special features including rapid detection time, low cost, easy to use and high selectivity and sensitivity. In this review, current progresses of incorporation between recognition elements and optical sensors for insecticide detection are discussed and evaluated well, by categorizing it based on insecticide chemical classes, including the range of detection and limit of detection. Additionally, this review aims to provide powerful insights to researchers for the future development of optical sensors in the detection of insecticides.

Aptamer Recognition-Driven Homogeneous Electrochemical Strategy for Simultaneous Analysis of Multiple Pesticides without Interference of Color and Fluorescence

Credible and simultaneous determination of multiple pesticides is highly desirable for guaranteeing food safety. However, the current methods are limited to significant interference of color and fluorescence or electrode's modification and mainly focus on the analysis of a single pesticide. Herein, we proposed a novel aptamer-based homogeneous electrochemical system for highly sensitive and simultaneous analysis of multiple pesticides based on target pesticide-switched exonuclease III (Exo III)-assisted signal amplification. The recognition of hairpin probes by target pesticides impels the production of pesticide-DNA complexes, which hybridize with electroactive dye-labeled DNA to form double-stranded DNA, subsequently initiating an Exo III-assisted digestion reaction to generate abundant electroactive dye-tagged mononucleotides. In comparison with pesticide deficiency, two higher differential pulse voltammetry (DPV) currents are measured, which rely on the amount of target pesticides. Therefore, simultaneous analysis of two pesticides is realized with limits of detection of 0.0048 and 0.0089 nM, respectively, comparable or superior to those of known methods that focused on a single pesticide. Moreover, the proposed system is successfully employed to simultaneously evaluate the residual level of acetamiprid and profenofos in Brassica chinensis and thus will find more useful applications for pesticide-related food safety.

Development of a molecularly imprinted microspheres-based microplate fluorescence method for detection of amantadine and rimantadine in chicken

In this study, molecularly imprinted microspheres of a type capable of recognising amantadine and rimantadine were first synthesised, and three fluorescent tracers based on dansyl chloride, fluorescein isothiocyanate and 5-carboxytetramethylrhodamine were also synthesised. These reagents were used to develop and optimise a direct competitive fluorescence method on conventional 96-well microplate for detection of the two analytes. Results showed that this method achieved simple operation procedure, rapid assay process (30 min), high sensitivity (limits of detection 0.04-0.05 ng mL^-1) and acceptable recycle performance (five times). After optimisation of several parameters, this method was used to detect amantadine and rimantadine in chicken muscle samples. Their recoveries from standards fortified blank samples were in the range of 62.3-93.7%. The analysis results for some real chicken samples were consistent with a confirmatory LC-MS/MS method. Therefore, this method could be used as a rapid, simple and accurate tool for routine screening the residues of amantadine and rimantadine in a large number of chicken muscle samples.

Simultaneous determination of ochratoxin A and enterotoxin A in milk by magnetic nanoparticles based fluorescent immunoassay

Ochratoxin A (OTA) and staphylococcus enterotoxin A (SEA) are highly toxic contaminants and have induced human health problems. They commonly occur in milk and milk products. A competitive fluorescent immunoassay was developed for rapid and simultaneous determination of these toxins in milk samples. The procedure was based on the competitive immunoreactions between antigens in sample and antigen-fluorescent dye conjugates with immobilised antibodies on magnetic nanoparticles (MNPs). Each monoclonal antibody specifically recognises its corresponding toxin (antigen), and there is no cross-reactivity in the assay. First, monoclonal antibodies against OTA and SEA were produced. The activity of the obtained antibodies was determined by fluorescent-linked immunosorbent assay. Then, the monoclonal antibodies were immobilised on MNPs. The amounts of immobilised anti-OTA antibody and anti-SEA antibody were determined to be 20 and 22 μg mL^-1, respectively. The antigen-fluorescent dye conjugates OTA-OVA-ATTO620 and SEA-FITC were prepared. The optimal amount of immobilised antibodies for competitive immunoassay was determined. It was found that the linear range of OTA in buffer was larger (0.001-100 ng mL^-1) than the linear range of SEA (0.001-20 ng mL^-1). The results for simultaneous determination of OTA and SEA in sixfold diluted milk were almost the same in buffer; the linear range for OTA was from 0.005  to 100 ng mL^-1 and for SEA from 0.005  to 20 ng mL^-1. The detection limit for both OTA and SEA in milk was 0.004 ng mL^-1. The developed method took half the time of the individual assays (20 min). The assay was evaluated using spiked milk samples. The influences of somatic cell count, fat, pH and protein concentration in milk on immunoassay were studied. In summary, this developed immunoassay could provide an effective and rapid approach for detecting multi-toxins in milk samples.

Development of a chemiluminescence immunoassay for detection of tenuazonic acid mycotoxin in fruit juices with a specific camel polyclonal antibody

The natural mycotoxin tenuazonic acid (TeA) in foods is identified as the most toxic mycotoxin among the over 70 kinds of secondary toxic metabolites produced by Alternaria alternata. Some hapten-antibody-mediated immunoassays have been developed for TeA detection in food samples, but these methods show unsatisfactory sensitivity and specificity. In this study, a rationally designed hapten for TeA mycotoxin generated with computer-assisted modeling was prepared to produce a highly specific camel polyclonal antibody, and an indirect competitive chemiluminescence enzyme immunoassay (icCLEIA) was established with a limit of detection of 0.2 ng mL-1 under optimized conditions. The cross-reactivity results showed that several analogs and some common mycotoxins had negligible recognition by the anti-TeA polyclonal antibody. The average recoveries spiked in fruit juices were determined to be 92.7% with an acceptable coefficient of variation, and good correlations between icCLEIA and liquid chromatography tandem mass spectrometry (LC-MS/MS) results were obtained in spiked samples. This developed icCLEIA for TeA detection with significantly improved sensitivity and satisfactory specificity is a promising alternative for environmental monitoring and food safety.

Novel fluorescence immunoassay for the detection of zearalenone using HRP-mediated fluorescence quenching of gold-silver bimetallic nanoclusters

In the presented study, a horseradish peroxidase (HRP)-mediated ratiometric fluorescence enzyme-linked immunosorbent assay (ELISA) for zearalenone (ZEN) was reported based on fluorescence quenching of gold-silver bimetallic nanoclusters (Au-Ag NCs). HRP-antibody was used as a bridge in this immunoassay, linking the ratiometric fluorescence signal to the ZEN concentration. HRP catalyzed the oxidization of o-phenylenediamine in the presence of H₂O₂, leading to the formation of 2,3-diaminophenazine, which not only delivered a new peak at 580 nm but also quenched Au-Ag NCs fluorescence at 690 nm. Under optimal conditions, the detection limit for the proposed ELISA was 0.017 ng/mL, which was approximately 6.6-fold lower than conventional ELISA. Moreover, analytical performances were evaluated fully including specificity, accuracy, precision, and practicability, and showed that this method provides a potential platform for sensitive and reliable detection of ZEN.

Magnetic assisted fluorescence immunoassay for sensitive chloramphenicol detection using carbon dots@CaCO3 nanocomposites

Analytical methods with high sensitivities and short assay times are urgently required for the screening of "zero tolerance" hazardous substances in food. Herein, we propose a fluorescent immunoassay for the highly sensitive and rapid analysis of chloramphenicol (CAP) based on carbon dots (CDs)-encapsulated CaCO₃ nanospheres and magnetic nanoparticles (MNPs). The fluorescent immunoprobes were prepared by coupling the anti-CAP antibodies to carboxymethyl cellulose-functional CDs@CaCO₃ nanospheres. Chitosan-modified MNPs with "core-shell" structures were prepared and then conjugated to the CAP hapten, acting as the nano-carrier and interface for the immunoreaction. With the assistance of MNPs, the established fluorescent immunoassay achieved the sensitive detection of CAP in chicken with a limit of detection of 0.03 μg kg^-1 and recoveries ranging from 83.7%-105.0%. The analysis results of the fluorescent immunoassay were evaluated by the enzyme-linked immunosorbent assay, having a correlation coefficient of 0.981. Our work provides a rapid, facile, and reliable strategy for the highly sensitive analysis of food contaminants based on "green" fluorescent nanoprobes.

Toward all on chip optical detection in the few molecule regime

Integrated optics devices are one of the most promising technologies in many fields such as biosensing, optical monitoring, and portable devices. They provide several advantages such as unique sensitivity and the possibility of the well-established and developed silicon photonics technology. However some challenges still remain open, as the implementation of multiplex assay able to reach the single particle sensitivity. In this context, we propose a new design for a Si-based photonic structure that enables the realization of on chip sub-wavelength optical sources. The idea is based on the insertion of opportunely designed nanometric holes in the photonic circuit, which are available for analyte detection with high efficiency. We propose three different configurations in which both excitation and detection are obtained through the same waveguide thus simplifying the detection scheme and potentially enabling multiplexed detection. We proved the high confinement of the electromagnetic field in the holes both by theoretical modelling and spectroscopic measurements. We investigate the possibility of inserting an arbitrary number of optical sources by using a resonator and evaluate advantages and drawbacks of resonating and non-resonating solutions. Finally, we report the proof-of-concept experiment, where detection sensitivity down to single Quantum Dots is obtained by combining the novel design with fluorescence-based techniques. Importantly, the presented results are achieved by a simple modification of photonic sensing chips which are already on the market thus having an excellent translational perspective.

Broad-spectrum electrochemical immunosensor based on one-step electrodeposition of AuNP-Abs and Prussian blue nanocomposite for organophosphorus pesticide detection

Broad-spectrum antibodies can effectively recognize substances with similar structures and have broad application prospects in field rapid detection. In this study, broad-spectrum antibodies (Abs) against organophosphorus pesticides (OPs) were used as sensitive recognition elements, which could effectively recognize most OPs. Gold nanoparticles (AuNPs) have good biocompatibility. It combined with Abs to form a gold-labeled probe (AuNPs-Abs), which enhances the effective binding of antibodies to nanomaterials. Prussian blue (PB) was added to electrodeposition solution to enhance the conductivity, resulting in superior electrochemical performance. The AuNP-Abs-PB composite film was prepared by electrodeposition on the electrode surface to improve the anti-interference ability and stability of the immunosensor. Under the optimal experimental conditions, the immunosensor had a wide detection range (IC₂₀-IC₈₀: 1.82 × 10^-3-3.29 × 10⁴ ng/mL) and high sensitivity. Most importantly, it was simple to be prepared and could be used to detect multiple OPs.

Application of phage-display developed antibody and antigen substitutes in immunoassays for small molecule contaminants analysis: A mini-review

Toxic small molecule contaminants (SMCs) residues in food threaten human health. Immunoassays are popular and simple techniques for SMCs analysis. However, immunoassays based on polyclonal antibodies, monoclonal antibodies and chemosynthetic antigens have some defects, such as complicated preparation of antibodies, risk of toxic haptens using for antigen chemosynthesis and so on. Phage-display technique has been proven to be an attractive alternative approach to producing antibody and antigen substitutes of SMCs, and opened up new realms for developing immunoassays of SMCs. These substitutes contain five types, including anti-idiotypic recombinant antibody (AIdA), anti-immune complex peptide (AIcP), anti-immune complex recombinant antibody (AIcA) and anti-SMC recombinant antibody (anti-SMC RAb). In this review, the principle of immunoassays based on the five types of substitutes, as well as their application and advantages are summarized and discussed.

Analysis of multiple mycotoxins-contaminated wheat by a smart analysis platform

This study describes a smart analysis platform capable of quantitative measurements using a multiplex lateral flow strip. Using the multi-mycotoxin strip, five fungal toxins were simultaneously and quantitatively detected in naturally contaminated wheat. First, a matrix-based standard curve was established for the detection of aflatoxin B1 (AFB1), fumonisin B1 (FB1), T-2, deoxynivalenol (DON), and zearalenone (ZEN). Established on an open android system, the platform is able to read 6 lines on the strip simultaneously. The platform is equipped with a Quick Response code scanning model, which reads the established standard curves, and then rapidly quantify mycotoxins in naturally contaminated wheat. All the data and sample information are stored on a central server through the platform which is linked to the cloud. The limits of detection (LOD) for AFB1, FB1, T-2, DON, and ZEN in wheat were 4, 20, 10, 200, and 40 μg/kg and the visual cut off values was 20, 1000, 200, 4000, and 400 μg/kg, separately. To validate the platform and the multi-mycotoxin detection method, 10 wheat samples were analyzed and the results were in a good agreement with those obtained by LC-MS/MS. The platform will be a powerful tool for crop monitoring services.