Dealing with strong mass interferences of chlorinated paraffins and their transformation products: An analytical guide

A Quasi Real-Time Evaluation of High-Resolution Mass Spectra of Complex Chlorinated Paraffin Mixtures and Their Transformation Products

Chlorinated paraffins (CPs) are complex mixtures of polychlorinated n-alkanes with multiple carbon- (C-, nC = 9-30) and chlorine homologues (Cl-, nCl = 3-18). The mass spectrometric analysis of CPs is time-consuming and challenging, especially when interferences between CPs, their transformation products, or from the matrix are numerous. These analytical challenges and the lack of appropriate and accessible data evaluation tools are obstacles to their analysis. CP-Hunter is a web-based, open-access data processing platform for the automatic analysis of mass spectra of CPs and their transformation products. Extracts of two consumer plastic materials and sewage sludge were evaluated with CP-Hunter. C- and Cl-homologue distributions were obtained in quasi-real-time and the posterior calculated fingerprints were in agreement with the ones obtained by traditional methods. However, the data extraction and evaluation time were now reduced from several minutes to seconds. The implemented signal deconvolution method, i.e., to resolve mass spectrometric interferences, provides robust results, even when severe matrix effects are present. CP-Hunter facilitates the untargeted analysis of unknown products and the detection and elimination of false positive signals. Finally, data evaluation with CP-Hunter is performed locally without the transfer of data to external servers. The tool is safe, public, and accessible at https://cphunter.cheminfo.org/.

Quantification of chlorinated paraffins by chromatography coupled to high-resolution mass spectrometry - Part A: Influence of gas chromatography and ionisation source parameters

The analysis of chlorinated paraffins (CPs) has become a major analytical challenge. GC-ECNI-HRMS coupling is often used to analyse and quantify them. However, the influence of certain GC and ECNI parameters on the responses of polychlorinated n-alkanes (PCAs), the dominant components of CPs, has hardly been studied. In this paper, we investigated not only the influence of GC column characteristics, but also oven, GC inlet and source temperatures for simultaneous analysis of PCAs with chain-length ranging from 10 up to 20 carbon atoms (PCAs-C10-20). Particular attention was paid to the absolute response and PCA homologue group pattern obtained for a CP technical mixture. The optimum conditions for a wide homologue group determination were GC inlet, final gradient and ion source temperatures set at 220-240 °C, 340 °C and 200 °C. At the same time, a higher response was obtained with the Optima 5HT column compared to Optima 1 column, and with a length and film thickness of 12.5 m and 0.25 μm, respectively. The homologue group pattern of the technical mixture studied was significantly modified as a function of the source and GC inlet temperatures, film thickness and composition of the stationary phase. Here we recommend conditions that will improve the overall PCA pattern, in order to better characterise their occurrence in future environmental monitoring and exposure assessment.

Quantification of chlorinated paraffins by chromatography coupled to high-resolution mass spectrometry - Part B: Influence of liquid chromatography separation

The analysis of chlorinated paraffins (CPs) is today an analytical challenge. Indeed, it is still impractical to describe their real composition in terms of polychlorinated alkanes (PCAs) homologue groups, which dominate technical mixtures. The co-elution of PCA congeners generates interferences due to the competition phenomena which occur during the ionisation process as well as to the dependence of the ionisation sources on the PCA chemistry. Therefore, the aim of this study was to investigate the influence of chromatographic separation, by LC-ESI-HRMS coupling, on the PCA homologue group pattern and, eventually, on their determination in food samples from interlaboratory studies. For this, three different mobile phases and six LC chromatographic columns were studied in order to optimise the analysis of CP mixtures. The first results showed that the use of a MeOH/H2O mobile phase reveals more appropriately the higher chlorinated PCAs. However, using ACN/H2O led to less ion species, with almost exclusively [M + Cl]- adducts, formed using post-column dichloromethane addition. Regarding the choice of the stationary phases, Hypercarb column provided a completely different homologue group pattern from the other chromatographic columns, in relation with the stronger retention of PCAs. Among the other columns, the C30 column better highlighted the short-chain PCAs compared to the C18 column conventionally used. Because the regulations now concern short-chain CPs, the quantification of food samples was then carried out on the C30 column. The optimised LC-ESI-HRMS conditions using C30 column and MeOH/H2O solvent mixture led to a quantification of PCAs in samples from interlaboratory studies with satisfactory accuracy (|Z-score| ≤ 2) and precision (<15%).

Evolution of chlorinated paraffin and olefin fingerprints in sewage sludge from 1993 to 2020 of a Swiss municipal wastewater treatment plant

Exposure of humans to chlorinated paraffins (CPs) and chlorinated olefins (COs) can occur via contact with CP-containing plastic materials. Such plastic materials can contain short-chain CPs (SCCPs), which are regulated as persistent organic pollutants (POPs) under the Stockholm Convention since 2017. Municipal wastewater treatment plants (WWTP) collect effluents of thousands of households and their sludge is a marker for CP exposure. We investigated digested sewage sludge collected in the years 1993, 2002, 2007, 2012, and 2020 from a Swiss WWTP serving between 20000 and 23000 inhabitants. A liquid chromatography mass spectrometry (R > 100000) method, in combination with an atmospheric pressure chemical ionization source (LC-APCI-MS), was used to detect mass spectra of CPs and olefinic side products. A R-based automated spectra evaluation routine (RASER) was applied to search for ∼23000 ions whereof ∼6000 ions could be assigned to CPs, chlorinated mono- (COs), di- (CdiOs) and tri-olefins (CtriOs). Up to 230 CP-, 120 CO-, 50 CdiO- and 20 CtriO-homologues could be identified in sludge. Characteristic fingerprints were deduced describing C- and Cl-homologue distributions, chlorine- (nCl) and carbon- (nC) numbers of CPs and COs. In addition, proportions of saturated and unsaturated material were determined together with proportions of different chain length classes including short- (SC), medium- (MC), long- (LC) and very long-chain (vLC) material. A substantial reduction of SCCPs of 84% was observed from 1993 to 2020. Respective levels of MCCPs, LCCPs and vLCCPs decreased by 61, 69 and 58%. These trends confirm that banned SCCPs and non-regulated CPs are present in WWTP sludge and higher-chlorinated SCCPs were replaced by lower chlorinated MCCPs. Combining high-resolution mass spectrometry with a selective and fast data evaluation method can produce characteristic fingerprints of sewage sludge describing the long-term trends in a WWTP catchment area.

Fingerprinting of chlorinated paraffins and their transformation products in plastic consumer products

Chlorinated paraffins (CPs) can be classified according to their length as short-chain (SC, C10-C13), medium-chain (MC, C14-C17) and long-chain (LC, C ≥ 18) CPs. Technical CP-mixtures can contain a wide range of carbon- (C-, nC = 10-30) and chlorine- (Cl-, nCl = 3-19) homologues. CPs are high-production volume chemicals (>106 t/y). They are used as flame-retardants, plasticizers and coolant fluids. Due to the persistence, bioaccumulation, long-range environmental transport potential and adverse effects, SCCPs are regulated as persistent organic pollutants (POPs) by the Stockholm Convention. Transformation of CPs can lead to the formation of unsaturated compounds such as chlorinated mono- (CO), di- (CdiO) and tri-olefins (CtriO). Such transformation reactions can occur at different stages of CP manipulation providing characteristic C-/Cl-homologue distributions. All this results in unique patterns that collectively create a fingerprint, which can be distinguished from CP-containing samples. Therefore, CP-fingerprinting can develop into a promising tool for future source apportionment studies and with it, the reduction of environmental burden of CPs and hazards to humans. Herein, CP-containing plastics were studied to establish fingerprints and develop this method. We analyzed four household items by reverse-phase liquid-chromatography coupled with a mass spectrometer with an atmospheric pressure chemical ionization source and an Orbitrap mass analyzer (RP-LC-APCI-Orbitrap-MS) operated at a resolution of 120000 (FWHM at m/z 200). MS-data of different CP-, CO-, CdiO- and CtriO-homologues were efficiently processed with an R-based automatic mass spectra evaluation routine (RASER). From the 16720 ions searched for, up to 4300 ions per sample were assigned to 340 C-/Cl-homologues of CPs and their transformation products. Specific fingerprints were deduced from the C-/Cl-homologues distributions, the carbon- (nC) and chlorine- (nCl) numbers and saturation degree. These fingerprints were compared with the ones obtained by a GC-ECNI-Orbitrap-MS method.

Gas/particle partitioning of short and medium chain chlorinated paraffins from a CP production plant using passive air sampler and occupational exposure assessment

Short and medium chain chlorinated paraffins (SCCPs and MCCPs) attract increasing attentions due to their persistence, long-range transport capacity. Their gas/particle partitioning from the production emission source, the effects to the ambient environment and exposure for employees are worth revealing. Polyurethane foam based passive air samplers (PUF-PAS) was deployed to determine the environmental levels of SCCPs (63.4-719.7 ng/m³) and MCCPs (151.6-1009.2 ng/m³) in the gas-phase and particle-phase both in the outdoor air in a CP production plant and the indoor air in the workshops. Extremely high SCCPs were found in the chlorination workshop and outdoor samples nearby, attributing to the release during the production. In the workshops, dramatically higher SCCP concentrations were determined than outdoors. SCCPs and MCCPs predominated in the gas-phase with a proportion >80 %. C₁₀-CPs and C₁₄-CPs were dominated with a proportion higher than 20 % and 50 %, respectively. Significant correlations between log K_p' and log P_L⁰ and log K_OA were observed in the outdoor air in a CP production plant and the indoor air in the workshops, respectively. A multivariate mechanism based on adsorption by organic matters and influenced by absorption processes might determine the gas/particle partitioning of CPs in the production source area. Two scenarios of occupational exposure i.e. working in the workshops and working outdoors were considered. Higher occupational exposure via inhalation to MCCPs was found for employees than SCCPs in the workshops, which was estimated to be 137.1 ng/kg/day at a worst case. No obvious adverse effects were observed for occupational employees in this CP production plant.

Selective and Fast Analysis of Chlorinated Paraffins in the Presence of Chlorinated Mono-, Di-, and Tri-Olefins with the R-Based Automated Spectra Evaluation Routine (RASER)

Chlorinated paraffins (CPs) are complex mixtures consisting of various C homologues (n_C ≈ 10-30) and Cl homologues (n_Cl ≈ 2-20). Technical CP mixtures are produced on a large scale (>10⁶ t/y) and are widely used such as plasticizers in plastic and coolants in metalwork. Since 2017, short-chain CPs (C₁₀-C₁₃) are classified as persistent organic pollutants (POPs) by the Stockholm Convention but longer-chain CPs are not regulated. Analysis of technical CP mixtures is challenging because they consist of hundreds of homologues and millions of constitutional isomers and stereoisomers. Furthermore, such mixtures can also contain byproducts and transformation products such as chlorinated olefins (COs). We applied a liquid-chromatography method coupled to an atmospheric pressure chemical ionization technique with a high-resolution mass detector (LC-APCI-Orbitrap-MS) to study CP and CO homologues in two plastic materials. Respective mass spectra can contain up to 23,000 signals from 1320 different C-Cl homologue classes. The R-based automated spectra evaluation routine (RASER) was developed to efficiently search for characteristic ions in these complex mass spectra. With it, the time needed to evaluate such spectra was reduced from weeks to hours, compared to manual data evaluation. Unique sets of homologue distributions could be obtained from the two plastic materials. CPs were found together with their transformation products, the chlorinated mono-olefins (COs), di-olefins (CdiOs), and tri-olefins (CtriOs) in both plastic materials. Based on these examples, it can be shown that RASER is an efficient and selective tool for evaluating high-resolution mass spectra of CP mixtures containing hundreds of homologues.

Semiquantitative Characterization of Bromo-chloro Paraffins and Olefins in the Australian Environment

A semiquantitative high-resolution mass spectrometry method was developed and applied to assess the occurrence of bromo-/chloro paraffins (BCPs) and olefins (BCOs) in the environment. More than 400 possible BCPs and BCO congener groups were detected in dust, air, and sewage sludge samples collected from Australia. Median chain analytes with the number of halogen atoms <7 (C_nH_mCl_xBr_y, 14 ≤ n ≤ 17, x + y < 7) prevailed in the dust and sludge samples, while short chain analytes (C_nH_mCl_xBr_y, 10 ≤ n ≤ 13, x + y < 7) predominated the air samples. The estimated concentrations of ∑BCPs and ∑BCOs in dust and sludge were approximately 20% that of the chlorinated paraffins (CPs) present, with the median concentrations of 5.4 μg/g (dust) and 0.18 μg/g (sludge) for ∑BCPs and 22 μg/g (in dust) and 0.50 μg/g (sludge) for BCOs. In the air samples, the concentrations of BCPs (0.020 pg/m³) and BCOs (0.032 pg/m³) were 3-4 orders of magnitudes lower than the concentrations of CPs (790 pg/m³). Significant correlations (P < 0.001) were found between the concentration of CPs, BCPs, and BCOs in all the matrices.

Chemical synthesis and characterization of single-chain C18-chloroparaffin materials with defined degrees of chlorination

Technical chlorinated paraffins (CPs) are produced via radical chlorination of n-alkane feedstocks with different carbon chain-lengths (∼C₁₀-C₃₀). Short-chain CPs (SCCPs, C₁₀-C₁₃) are classified as persistent organic pollutants (POPs) under the Stockholm Convention. This regulation has induced a shift to use longer-chain CPs as substitutes. Consequently, medium-chain (MCCPs, C₁₄-C₁₇) and long-chain (LCCPs, C_>17) CPs have become dominant homologues in recent environmental samples. However, no suitable LCCP-standard materials are available. Herein, we report on the chemical synthesis of single-chain C₁₈-CP-materials, starting with a pure n-alkane and sulfuryl chloride (SO₂Cl₂). Fractionation of the crude product by normal-phase liquid-chromatography and pooling of suitable fractions yielded in four C₁₈-CP-materials with different chlorination degrees (m_Cl,EA = 39-52%). In addition, polar side-products, tentatively identified as sulfite-, sulfate- and bis-sulfate-diesters, were separated from CPs. The new single-chain materials were characterized by LC-MS, ¹H-NMR and EA. LC-MS provided Relative retention times for different C₁₈-CP homologues and side-products. Mathematical deconvolution of full-scan mass spectra revealed the presence of chloroparaffins (57-93%) and chloroolefins (COs, 7-26%) in the four single-chain C₁₈-CP-materials. Homologue distributions and chlorination degrees were deduced for CPs and COs. ¹H-NMR revealed chemical shift ranges of mono-chlorinated (δ = 3.2-5.3 ppm) and non-chlorinated (δ = 1.0-3.2 ppm) hydrocarbon moieties. The synthesized C₁₈-single-chain standard materials and respective spectroscopic data are useful to identify and quantify LCCPs in various materials and environmental samples. CP- and CO-distributions resemble the ones of existing SCCP and MCCP reference materials and technical mixtures. Furthermore, these materials now allow specific studies on the environmental fate and the transformation of long-chain chloroparaffins and chloroolefins.

Enzymatic synthesis and formation kinetics of mono- and di-hydroxylated chlorinated paraffins with the bacterial dehalogenase LinB from Sphingobium indicum

Transformation studies of chlorinated paraffins (CPs) and the effects of CP transformation products on humans, biota and environment are rare. The focus here is on hydroxylation reactions. As for polyhalogenated persistent organic pollutants (POPs) in general, hydroxylation reactions convert lipophilic material to more polar compounds with increased mobility. We investigated the in-vitro transformation of single-chain CP-mixtures to hydroxylated products with the dehalogenase LinB from Sphingobium indicum. C₁₁-, C₁₂- and C₁₃-single-chain CP-homologues were exposed to LinB and mono-hydroxylated (CP-ols) and di-hydroxylated (CP-diols) transformation products were formed. Liquid-chromatography coupled to mass-spectrometry (LC-MS) was used to detect hydroxylated products and to separate them from the starting material. The presented data can be used to identify these CP-ol and CP-diol homologues in other samples. Hydroxylated products had lower chlorination degrees (n_Cl) than respective CP-starting-materials. Reactive and persistent CP-material was found in each homologue group. Reactive material is converted within hours by LinB, while more persistent CPs are transformed within days. Homologue-specific kinetic models were established to simulate the stepwise hydroxylation of persistent CPs to mono- and di-hydroxylated products. First-order rate constants for the formation of CP-ols (k₁) and CP-diols (k₂) were deduced for different homologues. Lower-chlorinated CP-ols did not accumulate to large extent and were transformed quickly to CP-diols, while higher-chlorinated CP-ols and -diols both accumulated. By enzymatic transformation of single-chain CPs with LinB, we synthesized unique sets of mono- and di-hydroxylated materials, which can be used as analytical standards and as starting materials for metabolic, toxicity and environmental fate studies.

Identifying emerging environmental concerns from long-chain chlorinated paraffins towards German ecosystems

Germany is one of several major European producers of chlorinated paraffins (CPs). This study showed that not only the legacy short-chain products (SCCPs, C_10-13), but also the current-use medium- and long-chain products (MCCPs, C_14-17; LCCPs, C_>17) as well as the very-short-chain impurities (vSCCPs, C_<10) are ubiquitous in the 72 samples collected from the coastal, terrestrial, and freshwater ecosystems across the country. The concentrations of LCCPs surpassed those of the other CPs in 40% of the biota samples. Archived bream samples collected downstream of a CP-manufacturing factory showed decreasing temporal trends of (v)SCCPs and relatively constant levels of MCCPs from 1995 to 2019; however, the overall levels of LCCPs have increased by 290%, reflecting the impact of chemical regulation policies on changes in CP production. A visualization algorithm was developed for integrating CP results from various matrices to illustrate spatial tendencies of CP pollution. Higher levels of (v)SCCPs were indicated in the former West Germany region, while MCCP and LCCP concentrations did not seem to differ between former East and West Germany, suggesting relatively equal production and use of these chemicals after the German Reunification. The results provide an early warning signal of environmental concerns from LCCPs on the eve of their booming global production and use.

Determination of chlorinated paraffins (CPs): Analytical conundrums and the pressing need for reliable and relevant standards

The determination of chlorinated paraffins (CPs) has posed an intractable challenge in analytical chemistry for over three decades. The combination of an as yet unspecifiable number (tens - hundreds of thousands) of individual congeners in mass produced commercial CP mixtures and the steric interactions between them, contrive to defy efforts to characterise their residual occurrences in environmental compartments, food and human tissues. However, recent advances in instrumentation (mass spectrometric detectors and nuclear magnetic resonance), combined with interlaboratory studies, have allowed a better insight into the nature of the conundrums. These include the variability of results, even between experienced laboratories when there is insufficient matching between analytical standards and occurrence profiles, the poor (or no) response of some instrumentation to some CP congener configurations (multiple terminal chlorines or < four chlorines) and the occurrence of chlorinated olefins in commercial mixtures. The findings illustrate some limitations in the existing set of commercially available standards. These include cross-contamination of some standards (complex CP mixtures), an insufficient number of single chain standards (existing ones do not fully reflect food/biota occurrences), lack of homologue group standards and unsuitability of some configurationally defined CP congeners/labelled standards (poor instrument response and a smaller likelihood of occurrence in commercial mixtures). They also indicate an underestimation in reported occurrences arising from those CPs that are unresponsive during measurement. A more extensive set of standards is suggested and while this might not be a panacea for accurate CP determination, it would reduce the layers of complexity inherent in the analysis.

Transformation of short-chain chlorinated paraffins and olefins with the bacterial dehalogenase LinB from Sphingobium Indicum - Kinetic models for the homologue-specific conversion of reactive and persistent material

Structure, reactivity and physico-chemical properties of polyhalogenated compounds determine their up-take, transport, bio-accumulation, transformation and toxicity and their environmental fate. In technical mixtures of chlorinated paraffins (CPs), these properties are distributed due to the presence of thousands of homologues. We hypothesized that roles of CP dehalogenation reactions, catalyzed by the haloalkane dehalogenase LinB, depend on structural properties of the substrates, e.g. chlorination degree and carbon-chain length. We exposed mixtures of chlorinated undecanes, dodecanes and tridecanes in-vitro to LinB from Sphingobium Indicum bacteria. These single-chain CP-materials also contain small amounts of chlorinated olefins (COs), which can be distinct by mathematical deconvolution of respective mass-spectra. With this procedure, we obtained homologue-specific transformation kinetics of substrates differing in saturation degree, chlorination degree and carbon chain-length. For all homologues, two-stage first-order kinetic models were established, which described the faster conversion of reactive material and the slower transformation of more persistent material. Half-lifes of 0.5-3.2 h and 56-162 h were determined for more reactive and more persistent CP-material. Proportions of persistent material increased steadily from 18 to 67% for lower (Cl₆) to higher (Cl₁₁) chlorinated paraffins and olefins. Conversion efficiencies decreased with increasing chlorination degree from 97 to 70%. Carbon-chain length had only minor effects on transformation rates. Hence, the conversion was faster and more efficient for lower-chlorinated material, and slower for higher-chlorinated and longer-chained CPs and COs. Current legislation has banned short-chain chlorinated paraffins (SCCPs) and forced a transition to longer-chain CPs. This may be counterproductive with regard to enzymatic transformation with LinB.

Congener-specific partition properties of chlorinated paraffins evaluated with COSMOtherm and gas chromatographic retention indices

Chlorinated Paraffins (CPs) are high volume production chemicals and have been found in various organisms including humans and in environmental samples from remote regions. It is thus of great importance to understand the physical-chemical properties of CPs. In this study, gas chromatographic (GC) retention indexes (RIs) of 25 CP congeners were measured on various polar and nonpolar columns to investigate the relationships between the molecular structure and the partition properties. Retention measurements show that analytical standards of individual CPs often contain several stereoisomers. RI values show that chlorination pattern have a large influence on the polarity of CPs. Single Cl substitutions (-CHCl-, -CH₂Cl) generally increase polarity of CPs. However, many consecutive -CHCl- units (e.g., 1,2,3,4,5,6-C₁₁Cl₆) increase polarity less than expected from the total number of -CHCl- units. Polyparameter linear free energy relationship descriptors show that polarity difference between CP congeners can be explained by the H-bond donating properties of CPs. RI values of CP congeners were predicted using the quantum chemically based prediction tool COSMOthermX. Predicted RI values correlate well with the experimental data (R², 0.975-0.995), indicating that COSMOthermX can be used to accurately predict the retention of CP congeners on GC columns.

Human Exposure to Chlorinated Paraffins via Inhalation and Dust Ingestion in a Norwegian Cohort

Very-short- (vSCCPs, C_6-9), short- (SCCPs, C_10-13), medium- (MCCPs, C_14-17), and long-chain chlorinated paraffins (LCCPs, C_>17) were analyzed in indoor air and dust collected from the living rooms and personal 24 h air of 61 adults from a Norwegian cohort. Relatively volatile CPs, i.e., vSCCPs and SCCPs, showed a greater tendency to partition from settled indoor dust to paired stationary indoor air from the same living rooms than MCCPs and LCCPs, with median logarithmic dust-air partition ratios of 1.3, 2.9, 4.1, and 5.4, respectively. Using the stationary indoor air and settled indoor dust concentrations, the combined median daily exposures to vSCCPs, SCCPs, MCCPs, and LCCPs were estimated to be 0.074, 2.7, 0.93, and 0.095 ng/kg bw/d, respectively. Inhalation was the predominant exposure pathway for vSCCPs (median 99%) and SCCPs (59%), while dust ingestion was the predominant exposure pathway for MCCPs (75%) and LCCPs (95%). The estimated inhalation exposure to total CPs was ∼ 5 times higher when the personal 24 h air results were used rather than the corresponding stationary indoor air results in 13 paired samples, indicating that exposure situations other than living rooms contributed significantly to the overall personal exposure. The 95^th percentile exposure for CPs did not exceed the reference dose.

Transformation of short-chain chlorinated paraffins by the bacterial haloalkane dehalogenase LinB - Formation of mono- and di-hydroxylated metabolites

Short-chain chlorinated paraffins (SCCPs) are listed as persistent organic pollutants (POPs) under the Stockholm Convention. Such substances are toxic, bioaccumulating, transported over long distances and degrade slowly in the environment. Certain bacterial strains of the Sphingomonadacea family are able to degrade POPs, such as hexachlorocyclohexanes (HCHs) and hexabromocyclododecanes (HBCDs). The haloalkane dehalogenase LinB, expressed in certain Sphingomonadacea, is able to catalyze the transformation of haloalkanes to hydroxylated compounds. Therefore, LinB is a promising candidate for conversion of SCCPs. Hence, a mixture of chlorinated tridecanes was exposed in vitro to LinB, which was obtained through heterologous expression in Escherichia coli. Liquid chromatography mass spectrometry (LC-MS) was used to analyze chlorinated tridecanes and their transformation products. A chloride-enhanced soft ionization method, which favors the formation of chloride adducts [M+Cl]^- without fragmentation, was applied. Mathematical deconvolution was used to distinguish interfering mass spectra of paraffinic, mono-olefinic and di-olefinic compounds. Several mono- and di-hydroxylated products including paraffinic, mono-olefinic and di-olefinic compounds were found after LinB exposure. Mono- (rt = 5.9-6.9 min) and di-hydroxylated (rt = 3.2-4.5 min) compounds were separated from starting material (rt = 7.7-8.5 min) by reversed phase LC. Chlorination degrees of chlorinated tridecanes increased during LinB-exposure from n_Cl = 8.80 to 9.07, indicating a preferential transformation of lower chlorinated (Cl_<9) tridecanes. Thus, LinB indeed catalyzed a dehalohydroxylation of chlorinated tridecanes, tridecenes and tridecadienes. The observed hydroxylated compounds are relevant CP transformation products whose environmental and toxicological effects should be further investigated.

Protein-affinity guided identification of chlorinated paraffin components as ubiquitous chemicals

Chlorinated paraffins (CPs) have been extensively examined to identify their components. Short-chain CPs with a carbon number of 10-13 have been strictly restricted or banned due to their addition to the list of Persistent Organic Pollutants in the world. However, more constituents with potential toxicities in these complicated mixtures are still unclear. In the present study, a purification method based on the protein affinity of thyroid hormone-related proteins (transthyretin and thyroid receptor) was established. The protein-based affinity extraction coupled with high-throughput scanning successfully discover a new group of chlorinated compounds (CP(O₂)) in commercial CP mixtures. The CP(O₂)s were purified from the commercial mixtures and identified to be chlorinated fatty acid methyl esters (CFAMEs) with a carbon chain length of 17-19 and 3-11 chlorines by a combination of liquid-liquid extraction, hydrolysis, Fourier transform infrared spectrometry and Orbitrap mass spectrometry. The newly identified CFAMEs were found to be ubiquitous in the environmental matrices, and concentration ratios of ∑CFAMEs/∑CPs ranged from 0.01 to 35 in air, soil and food samples. CFAMEs were also detected in blood samples of general populations, and accumulated in humans through dietary uptake. CFAMEs can compete with T4 for binding TTR with higher potencies than CPs, possibly leading to disruptions of thyroid hormone homeostasis.

A simplified screening method for short- and medium-chain chlorinated paraffins in food by gas chromatography-low resolution mass spectrometry

This study evaluates the performance of a simplified screening method for short- and medium-chain chlorinated paraffins (SCCPs and MCCPs, respectively) based on gas chromatography-electron capture negative ionization/mass spectrometry (GC-ECNI/MS) analysis and chlorine content quantification. The response from different combinations of 'indicator' congener groups present in technical mixture standards were used within calibration calculations to test the hypothesis that ∑SCCPs and ∑MCCPs could be quantified with acceptable accuracy using only a subset of the commonly analysed C₁₀ to C₁₇ and Cl₅ to Cl₁₀ groups. Potential combinations were assessed with respect to calibration curve performance and accuracy of SCCP and MCCP analysis of spiked food samples (olive oil, salmon, pork sausage, breakfast cereal, cow's milk and lard). Based on these trials, a screening method which quantifies ∑SCCPs and ∑MCCPs using only congener groups with 6 and 8 chlorine atoms for each carbon chain length was proposed. Concentrations of SCCPs and MCCPs in triplicate analyses of spiked food samples calculated using the proposed screening method deviated by ≤ 25% for the vast majority of samples (maximum deviation 37%) from levels determined using all analysed congener groups. The mean trueness of the screening method as applied to each of the spiked food samples and lard samples from a previous European Union Reference Laboratory (EURL) interlaboratory study ranged from 65 to 110% for ∑SCCPs and 102 to 175% for ∑MCCPs. Relative standard deviations (RSDs) were ≤ 25% for all triplicate analyses and matrix specific LOQs ranged from 0.7 to 6 ng/g ww for ∑SCCPs and from 1.3 to 12 ng/g ww for ∑MCCPs. The proposed screening method has the potential to deliver substantial time savings in instrumental analysis and manual labour without greatly reducing the overall accuracy and sensitivity of SCCP and MCCP quantification.

Blood partitioning and whole-blood-based maternal transfer assessment of chlorinated paraffins in mother-infant pairs from South China

As a new group of persistent organic pollutants of concern, chlorinated paraffins (CPs) have been widely detected in the environment and biota, but their occurrence, partitioning, and transfer in humans have been not well documented. In this study, 32 pairs of maternal blood, cord blood, and placenta samples were collected from pregnant women in South China, and the blood was further separated into plasma and red blood cells (RBCs) for blood partitioning study. Short- and medium-chain CPs (SCCPs and MCCPs, respectively) were detected in all the five human biological matrices, suggesting prevalent exposure and maternal transfer of CPs in the pregnant women. Discrepant congener group profiles of CPs were observed in different human biological matrices. Significant differences in the plasma-RBC partitioning of CPs in the maternal and cord bloods were identified (p < 0.001). CP partitioning to plasma was stronger than that to RBCs in maternal blood, but the converse was true for cord blood. Mass fractions in plasma (F_p) for SCCPs (mean, 0.78) and MCCPs (0.74) in maternal blood were significantly higher than the values in cord blood. Transplacental transfer efficiencies (TTEs) were evaluated based on the whole blood concentrations of CPs in the maternal and cord bloods, and the TTEs ranged from 0.50 to 0.69 (first to third quartiles) for SCCPs and MCCPs, indicating that the placenta can partially restrict maternal transfer. The extent of CP retention in the placenta was assessed by the concentration ratio (R_PM) of matched placenta and maternal blood, and interestingly, a U-shaped trend for placental retention (R_PM) with increasing chain length was observed for individual congener groups. Significant relationships of the CP concentrations among the maternal blood, cord blood, and placenta were observed (p < 0.001). To our knowledge, this is the first study to report the plasma-RBC partitioning of CPs in human maternal and cord bloods, as well as the first study to evaluate TTEs based on whole blood concentrations. Our study confirmed that whole blood is the preferred matrix for accurately assessing human internal exposure and transplacental transfer of CPs.

Characterization of synthetic single-chain CP standard materials - Removal of interfering side products

The photolytic chlorination of n-alkanes in presence of sulfuryl chloride (SO₂Cl₂) was explored to produce new standard materials. Five mixtures of chlorinated tetradecanes were synthesized with chlorination degrees (m_Cl,EA) varying from 43.7% to 59.4% (m/m) based on elemental analysis. Chlorine-enhanced negative chemical ionization mass spectrometry (CE-NCI-MS) forcing the formation of chloride-adduct ions [M+Cl]^- was applied to characterize these materials which all contained tetra-to deca-chlorinated paraffins. Deconvolution of respective mass spectra revealed the presence of chlorinated olefins (COs). CO levels were highest in materials, which were exposed longest. All synthesized materials also contained two classes of polar impurities, tentatively assigned as sulfite- and sulfate-diesters with molecular formulas of C₁₄H_28-xO₃SCl_x (x = 1-4) and C₁₄H_28-xO₄SCl_x (x = 3-6), respectively. MS data were in accordance with the proposed structures but further work is needed to deduce their constitutions. These compounds are thermolabile and were not detected with GC-MS methods. We could remove these sulfur-containing impurities from the CPs with normal-phase liquid chromatography. In conclusion, single-chain CP materials were synthesized via chlorination of n-alkanes with sulfuryl chloride, but these materials contained reactive side products which should be removed to gain non-reactive and stable CP materials suitable as standards and for fate and toxicity studies.

Chlorines Are Not Evenly Substituted in Chlorinated Paraffins: A Predicted NMR Pattern Matching Framework for Isomeric Discrimination in Complex Contaminant Mixtures

Chlorinated paraffins (CPs) can be mixtures of nearly a half-million possible isomers. Despite the extensive use of CPs, their isomer composition and effects on the environment remain poorly understood. Here, we reveal the isomeric distributions of nine CP mixtures with single-chain lengths (C14/15) and varying degrees of chlorination. The molar distribution of C n H2n+2-m Cl m in each mixture was determined using high-resolution mass spectrometry (MS). Next, the mixtures were analyzed by applying both one-dimensional 1H, 13C and two-dimensional nuclear magnetic resonance (NMR) spectroscopy. Due to substantially overlapping signals in the experimental NMR spectra, direct assignment of individual isomers was not possible. As such, a new NMR spectral matching approach that used massive NMR databases predicted by a neural network algorithm to provide the top 100 most likely structural matches was developed. The top 100 isomers appear to be an adequate representation of the overall mixture. Their modeled physicochemical and toxicity parameters agree with previous experimental results. Chlorines are not evenly distributed in any of the CP mixtures and show a general preference at the third carbon. The approach described here can play a key role in understanding of complex isomeric mixtures such as CPs that cannot be resolved by MS alone.

Spatiotemporal variations of chlorinated paraffins in PM2.5 from Chinese cities: Implication of the shifting and upgrading of its industries

To highlight the levels and distributions and to assess the risk of human exposure of chlorinated paraffins (CPs) in PM_2.5 in China, the concentrations and homologue patterns of short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs) in PM_2.5 from 10 cities in China were studied in 2013 and 2014. The mean concentrations of ΣSCCPs and ΣMCCPs were 19.9 ± 41.1 ng m^-3 and 15.6 ± 18.6 ng m^-3, respectively. Unexpectedly, the highest pollution levels occurred in two central cities (Xinxiang and Taiyuan) rather than in well-known eastern megacities such as Beijing, Nanjing, Shanghai, and Guangzhou. By comparing with earlier research, it has indicated the trend of CPs industry shifting from large eastern cities to small and medium-sized cities in central China to some extent. In addition, the composition pattern of SCCPs demonstrated an obviously differences from previous studies, with C₁₁ and Cl₇ predominating and accounting for 45.1% and 24.9%, respectively. Meanwhile, the ratio of MCCPs/SCCPs in most cities was less than 1.00 except for Guangzhou (1.92), Shanghai (1.29), and Taiyuan (1.11). Combined with the results of correlation analysis and principal component analysis, the observed pollution characteristics of CPs in PM_2.5 had similar sources, which were more influenced by the ratio of MCCPs/SCCPs than by organic carbon, elemental carbon, temperature, population, and gross domestic product. Overall, the composition of CPs reflected the characteristics of local industrial production and consumption, and also implied efforts of Chinese enterprises to reduce the content of short carbon groups of CPs production. The CPs mainly deposited in head airways during the process of entering the human respiratory system. However, at the present levels, there was no significant carcinogenic effect for human health.

Exploratory analysis and ranking of analytical procedures for short-chain chlorinated paraffins determination in environmental solid samples

Short-chain chlorinated paraffins are ones of the most recent chemical compounds that have been classified as persistent organic pollutants. They have various applications and are emitted to the environment. Despite the fact, that the content levels of these compounds in the environmental compartments should be monitored, there is still a lack of well-defined and validated analytical procedures, proposed or suggested by the national or international environmental protection agencies. Finding an appropriate analytical procedure (sensitive and green at the same time) from many available ones is very often a difficult task. Therefore it can be supported with multicriteria decision analysis. The dataset consisting of 22 procedures was described by 7 criteria, mainly referring to procedures greenness. The data treatment with cluster analysis and principal component analysis revealed the internal structure of the dataset. Moreover, both statistical tools allowed for reduction of dataset criteria to three. This was used for applying ternary plot to show the multicriteria decision analysis results within all possible weights. With the aid of chemometric and multicriteria decision analysis tools it was easy to assess the set of analytical procedure. Depending on the applied weights to assessment criteria different analytical procedures are the most appropriate (winners).

Complex Mixtures of Chlorinated Paraffins Found in Hand Wipes of a Norwegian Cohort

Up to 18000 ng of total chlorinated paraffins (CPs) was found in hand wipes of individual adult participants in a Norwegian cohort study (n = 60), with a geometric mean (SD) value of 870 (2700) ng. The CPs covered a wide range of alkane chain lengths from C₇ to C₄₈ with variable chlorine substitution. Complex mixtures of very-short-chain (vSCCPs, C_<10), short-chain (SCCPs, C_10-13), medium-chain (MCCPs, C_14-17), and long-chain (LCCPs, C_>17) CPs were found, contributing on average 0.3%, 20%, 58%, and 22%, respectively, of the total CPs. Significant positive correlations were found between CP levels and factors related to the indoor environment and product use, including living in a house/apartment built before the ban of SCCPs, having a sofa, the number of TVs in the home, and owning a car, which mirrors CP usage as flame retardants and/or plasticizers in consumer products. Compared to previous studies of other organic contaminants in hand wipe samples from the same cohort, CPs were the most abundant flame retardants. This is the first report of CPs in hand wipes, and dermal exposure based on these data suggested that hand contact could be an important human exposure pathway for LCCPs.

Development of an ammonium chloride-enhanced thermal-assisted-ESI LC-HRMS method for the characterization of chlorinated paraffins

Simultaneous quantification of short-, medium-, and long-chain chlorinated paraffins (CPs) in environmental matrices is challenging and has received much attention from environmental chemists. In this study, ammonium-chloride-enhanced liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) was developed for the first time to quantify CPs in sediments and aqueous samples. Three ionization sources, including atmospheric pressure chemical ionization (APCI), electrospray ionization (ESI), and thermal-assisted-ESI, were employed to examine the performance of ammonium chloride as the chloride ion supply reagent in comparison with traditional chloride ion supply reagent, dichloromethane. Ammonium chloride can be easily used with reversed-phase liquid chromatography (LC), whereas dichloromethane is not compatible with aqueous LC mobile phase. Furthermore, other anion-supply reagents, such as ammonium formate, ammonium acetate, and ammonium bromide, were also tested. It was concluded that the adducts of the CPs with the anions were reversible and could partially dissociate into deprotonated CP ions. The yield of deprotonated CP ions was associated with the gas-phase basicity of the deprotonated CP ions and the corresponding anions. Furthermore, collision-induced dissociation curves were drawn to quantify the stability of anionic CP adducts. The ammonium-chloride-enhanced LC-HRMS was further employed for identifying CPs in sediment samples and coupled with an online SPE method for detecting CPs in aqueous samples. This study may significantly contribute to the qualification and quantification of CPs in environmental matrices.

Interlaboratory studies on chlorinated paraffins: Evaluation of different methods for food matrices

Short-chained chlorinated paraffins (SCCP) and medium-chained chlorinated paraffins (MCCPs) are two of the main groups currently used to classify chlorinated paraffins (CPs). Since only SCCPs have been restricted by the Stockholm Convention, a robust but selective analysis with comparable results especially for SCCPs, but also for all other CPs is needed to ensure official controls to enforce future resulting food legislation. Failing that, expansion of the legislation towards total CP or to include MCCPs and other main groups needs to be considered. A survey taken amongst official and private laboratories in the EU and beyond revealed a large variety of methods currently in use or in planning stages for CP analysis. In June 2017, spiked samples of coconut fat were sent to 27 registered participants from 18 countries for an interlaboratory study. In July 2018, lard samples spiked with CPs, polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) were sent to 13 registered participants from 11 countries. In both cases, more than 55% of participants had a satisfactory overall performance (AZ²<3, σ = 25%). The greatest challenge seemed to be correct quantification of SCCP and MCCP mixtures, hinting at future problems with the through biodegradation much more complex food samples. Of the wide variety of methods being used, GC-MS based methods were favoured. Both HRMS and LRMS methods were able to perform satisfactorily. Identified influencing factors included choice of instrument, choice of standards and data processing strategy. These factors need to be further investigated in future interlaboratory studies.

C12-30 α-Bromo-Chloro "Alkenes": Characterization of a Poorly Identified Flame Retardant and Potential Environmental Implications

Bromo-chloro alkenes (Br-Cl PXAs) have been used for over 30 years as flame retardants and are listed on several national chemical inventories. Very little publicly available information is available on Br-Cl PXAs, and thus preliminary ecological risk screening is challenging due to the lack of basic information such as molecular structure and associated physicochemical properties. Due to their likely similarity with chlorinated paraffins (CPs), Br-Cl PXAs may pose a similar environmental hazard. Several structural databases list such substances as "alkenes", although the industrial synthesis involves halogenation of linear alpha-olefins and would be expected to produce linear alkanes. In this study, a combination of high-resolution separation and mass spectrometric techniques were used to characterize a Br-Cl PXA industrial technical product, C_12-30 bromo-chloro alpha-alkenes (CAS RN 68527-01-5). The results show this product is dominated by C₁₈ carbon chain lengths, substituted with 3-7 chlorine atoms and 1-3 bromine atoms on an alkane chain. Long-chain C₁₈ chlorinated paraffins are also present, although they represent a relatively minor component. Experimental log K_OW (6.9 to 8.6) and estimated log K_OA (10.5 to 13.5) and log K_AW (-5.1 to -0.6) partition coefficients suggest that this chemical will behave similarly to medium- and long-chain CPs as well as other persistent organic pollutants, such as highly chlorinated pesticides and polychlorinated biphenyls. The results of this study provide an initial step toward understanding the environmental behavior and persistence of Br-Cl PXAs, highlighting the need for further assessment and re-evaluation of the current structure(s) assigned to these compounds.

The underlying challenges that arise when analysing short-chain chlorinated paraffins in environmental matrices

As short-chain chlorinated paraffins (SCCPs) are listed on several monitoring programs, validated methods are essential. However, their complexity and the lack of commercially available certified reference materials (RMs) hinder a proper validation of methods. Instead, one method is usually 'validated' by evaluating performances and results of spiked materials with that of one other method, which could easily lead to unreliable results. This study evaluated four analytical methods with different principles (i.e. comprehensive two dimensional GC coupled to a micro electron capture detector, developed for this study, chloride enhanced atmospheric pressure chemical ionization triple quadrupole time of flight MS (APCI-QToF-HRMS), GC coupled to an electron capture negative ion low resolution MS (GC-ECNI-LRMS) and carbon skeleton GC-MS), investigated the comparability in SCCP determination in spiked and naturally contaminated samples and determined SCCP amounts in candidate RMs for possible certification. The results cast doubt on the use of the most commonly applied method (i.e. GC-ECNI-LRMS), as well as using spiked materials for method validation. The APCI-QToF-HRMS method was found most promising as it achieves the required MS resolution (>21,000), is relatively fast and can detect also other CPs. The suitable identified SCCP levels in the candidate RMs and the agreement in results between the methods bring the first certification of a RM for SCCPs within reach.

Shorter than short-chain: Very short-chain chlorinated paraffins (vSCCPs) found in wildlife from the Yangtze River Delta

Very short-chain chlorinated paraffins (vSCCPs, C_6-9) occurred in 94% of wildlife samples from the Yangtze River Delta (YRD), China, with C_nCl_m comparable to that of a local CP product, CP-52. Therefore, we determined the content of vSCCPs in CP-52 using a mathematical deconvolution technique. Then with CP-52 and several other reference standards, vSCCPs together with short-, medium-, and long-chain CPs were quantified in 21 wildlife species from an artificial wetland ecosystem and a freshwater ecosystem in the YRD. Concentrations of vSCCPs ranged from 2.6 to 8400 ng/g lipid. These concentrations were 1.2-380 fold lower than SCCPs, but were significantly correlated with those of SCCPs. vSCCP concentrations were comparable to or higher than reported for brominated flame retardants in the same samples. Bioaccumulation tendency of vSCCPs was identified in two benthic species, indicating congener-specific accumulation of vSCCPs in the environment.

Biotransformation of short-chain chlorinated paraffins (SCCPs) with LinA2: A HCH and HBCD converting bacterial dehydrohalogenase

Short-chain chlorinated paraffins (SCCPs) are polyhalogenated hydrocarbons as are hexachlorocyclohexanes (HCHs) and hexabromocyclododecanes (HBCDs). They all have been classified as persistent organic pollutants (POPs) under the UN Stockholm Convention. Per se such compounds are transformed slowly in the environment, transported over long distances and accumulate in biota. Several Sphingomonadacea strains isolated from HCH dump sites have evolved to express enzymes that can transform HCHs and HBCDs. We hypothesized that LinA2, a dehydrohalogenase expressed in such bacteria, may also transform CPs to chlorinated olefins (COs). Three mixtures of penta- to deca-chlorinated undecanes (C₁₁), dodecanes (C₁₂) and tridecanes (C₁₃) were exposed to LinA2. High-resolution full-scan mass spectra (R∼8'000) of CPs and COs were obtained applying a soft ionization method, enhancing chloride-adduct [M+Cl]^- formation. A mathematical deconvolution procedure was used to separate interfering spectra to verify that LinA2 indeed catalyzed the conversion of CPs to COs. About 20-40% of the material was transformed in 24 h, about 50-70% was converted in 200 h. A bimodal first-order kinetic model could describe transformations of reactive and persistent CPs. Under the given conditions reactive CPs (τ_1/2 = 1.4-6.9 h) were converted 30 to 190-times faster than the persistent ones (τ_1/2 = 150-260 h). Proportions of persistent isomers (p_p) varied from 60 to 80%. Lower chlorinated homologues contained higher proportions of persistent isomers. In conclusion, SCCP mixtures contain both, material that is readily converted by LinA2, and persistent material that is not or only slowly transformed.

Analytical procedures for short chain chlorinated paraffins determination - How to make them greener?

The aim of the following paper was to gather current scientific information about the analytical protocols dedicated to measuring the content level of short-chain chlorinated paraffins (SCCPs) in various types of environmental samples. Moreover, the data about the basic validation parameters of applied procedures for SCCPs determination are listed. The main issue which is highlighted in the paper is the possibility of the application of green analytical chemistry (GAC) principals in the SCCPs measuring process to reduce the environmental impact of the applied methodology. Analytical methods dedicated to SCCPs determination contain a significant number of steps and require advanced analytical equipment during the quantitative and qualitative analysis. In addition, there is a substantial issue associated with the reliability of the obtained results, especially in the case of the quantification of individual SCCPs in the studied samples. Due to this fact, the paper attempts to discuss the various stages of the analytical procedure, in which appropriate changes in the formula or equipment solutions might be introduced to ensure a better quality of the analytical results, as well as to meet the requirements of the philosophy of green analytical chemistry. The most important case which concerns this subject is finding an optimal consensus between the economic and logistic aspects and the quality and "greenness" of the analytical procedure employed in SCCPs determination process.

Methods for trace analysis of short-, medium-, and long-chain chlorinated paraffins: Critical review and recommendations

Many methods for quantifying chlorinated paraffins (CPs) yield only a total concentration of the mixture as a single value. With appropriate analytical instrumentation and quantification methods, more reliable and detailed analysis can be performed by quantifying total concentrations of short-, medium-, and long-chain CPs (SCCPs, MCCPs, and LCCPs), and in the current optimal situation by quantifying individual carbon-chlorine congener groups (C_nCl_m). Sample extraction and clean-up methods for other persistent organochlorines that have been adapted for recovery of CPs must be applied prior to quantification with appropriate quality assurance and quality control to ensure applicability of the methods for SCCPs, MCCPs, and LCCPs. Part critical review, part tutorial, and part perspective, this paper provides practical guidance to analytical chemists who are interested in establishing a method for analysis of CPs in their lab facilities using commercial reference standards, or for expanding existing analysis of total CPs or SCCPs to analysis of SCCPs, MCCPs, and LCCPs, or to analysis of C_nCl_m congener groups.

HaloSeeker 1.0: A User-Friendly Software to Highlight Halogenated Chemicals in Nontargeted High-Resolution Mass Spectrometry Data Sets

In the present work, we address the issue of nontargeted screening of organohalogenated chemicals in complex matrixes. A global strategy aiming to seek halogenated signatures in full-scan high-resolution mass spectrometry (HRMS) fingerprints was developed. The resulting all-in-one user-friendly application, HaloSeeker 1.0, was developed to promote the accessibility of associated in-house bioinformatics tools to a large audience. The ergonomic web user interface avoids any interactions with the coding component while allowing interactions with the data, including peak detection (features), deconvolution, and comprehensive accompanying manual review for chemical formula assignment. HaloSeeker 1.0 was successfully applied to a marine sediment HRMS data set acquired on a liquid chromatography-heated electrospray ionization [LC-HESI(-)] Orbitrap instrument ( R = 140 000 at m/z 200). Among the 4532 detected features, 827 were paired and filtered in 165 polyhalogenated clusters. HaloSeeker was also compared to three similar tools and showed the best performances. HaloSeeker's ability to filter and investigate halogenated signals was demonstrated and illustrated by a potential homologue series with C₁₂H _xBr _yCl _zO₂ as a putative general formula.