Is the phase-out of long-chain PFASs measurable as fingerprint in a defined area? Comparison of global PFAS concentrations and a monitoring study performed in Hesse, Germany from 2014 to 2018

A quantitative classification method of land uses and assessment of per-and poly-fluoroalkyl substances (PFAS) occurrence in freshwater environments

We developed a quantitative method for classifying land uses for PFAS-related investigations in freshwater environments and determined PFAS ambient concentrations associated with specific land-use classes. Furthermore, our study presents a comprehensive assessment of the ambient occurrence and risks of PFAS mixtures beyond the usually studied PFOS-PFOA mixtures. Eighty-five inland (freshwater only) sites were sampled for water, sediment, and riparian soil in Victoria, south-east Australia, and analyzed for 33 PFAS. PFAS were detected in 91% of water samples, 34% of sediment samples, and 28% of riparian soil samples. Four land-use classes were defined: remote, agricultural, mixed, and urban. In the remote land-use class, only PFOS was detected at a low ambient concentration (0.0002 μg/L) in one water sample. Short-chain PFCA were frequently detected in the agricultural and mixed water samples. PFBA had the highest median ambient concentration in both land uses (ca. 0.01 μg/L), contributing to both ΣPFAS (40%) and ΣPFCA (50%) concentrations. In the urban land-use class, several congeners (PFBA, PFPeA, PFHxA, PFOA, PFHxS, and PFOS) had median ambient concentrations at or close to 0.01 μg/L and contributed similarly to ΣPFAS (10-20%). Elevated risk to the aquatic environment was found only for PFOS in two mixed and eight urban sites. This pattern was consistent with the finding for PFAS mixtures, where the elevated risk was driven by PFOS at those same sites. Our study provides critical information about environmentally relevant ambient concentrations and PFAS mixtures. This information, together with the land-use classification approach presented herein, can be used as reference levels for several critical purposes, including identifying PFAS-contaminated sites, informing land use planning and development decisions, setting standards and guidelines, and tracking changes over time.

Exploring the sources, occurrence, transformation, toxicity, monitoring, and remediation strategies of per- and polyfluoroalkyl substances: a review

Per- and polyfluoroalkyl substances (PFAS), a class of man-made chemicals, possess unique properties that have rendered them indispensable in various industries and consumer goods. However, their extensive use and persistence in the environment have raised concerns about their potential repercussions on human health and the ecosystem. This review provides insights into the sources, occurrence, transformation, impacts, fate, monitoring, and remediation strategies for PFAS. Once released into the environment, these chemicals undergo intricate transformation processes, such as degradation, bioaccumulation, and biomagnification, which result in their far-reaching distribution and persistence. Their chemical stability results in persistent pollution, with far-reaching ecological and human health implications. Remediation strategies for PFAS are still in their infancy, and researchers are exploring innovative and sustainable methods for treating contaminated environments. Promising technologies such as adsorption, biodegradation, and electrochemical oxidation have shown the potential to remove PFAS from contaminated sites, yet the search for more efficient and sustainable solutions continues. In conclusion, this review emphasizes the urgent need for continued research and innovation to address the global environmental challenge posed by PFAS. As we move forward, it is imperative to prioritize sustainable solutions that minimize the detrimental consequences of these substances on human health and the environment.

Comprehensive analysis of PFAS presence from environment to plate

Per- and polyfluoroalkyl substances (PFAS) pose an emerging environmental risk impacting food products and ecosystems. This study analyzes over 150,000 entries from food safety authorities and scientific publications from 2017 onwards. Our findings show that fish & seafood, and biota have the highest PFAS concentrations due to environmental contamination and bioaccumulation. Surface water samples also frequently contain PFAS, raising concerns about long-term ecological and human health effects. Comprehensive strategies are essential to mitigate these risks.

Advances in perfluoro-alkylated compounds (PFAS) detection in seafood and marine environments: A comprehensive review on analytical techniques and global regulations

Per- and poly-fluoroalkyl substances (PFAS) are persistent organic pollutants that severely threaten the environment and human health due to their distinct chemical composition, extensive production, widespread distribution, bioaccumulation in nature, and long-term persistence. This review focuses on the occurrence and sources of PFAS in seafood, with a particular emphasis on advanced detection methods viz. nanoparticle-based, biosensor-based, and metal-organic frameworks-based, and mass spectrometric techniques. The challenges associated with these advanced detection technologies are also discussed. Recent research and regulatory updates about PFAS, including hazardous and potential health effects, epidemiological studies, and various risk assessment models, have been reviewed. In addition, the need for global monitoring programs and regulations on PFAS are critically reviewed by underscoring their crucial role in protecting human health and the environment. Further, approaches for reducing PFAS in seafood are highlighted with future innovative remediation directions. Although advanced PFAS analytical methods are available, selectivity, sample preparation, and sensitivity are still significant challenges associated with detection of PFAS in seafood matrices.  Moreover, crucial research gaps and solutions to essential concerns are critically explored in this review.

Metabolomic changes following GenX and PFBS exposure in developing zebrafish

Short chain per- and polyfluoroalkyl substances (PFAS), including hexafluoropropylene oxide dimer acid (GenX) and perfluorobutane sulfonate (PFBS), are replacement chemicals for environmentally persistent, long-chain PFAS. Although GenX and PFBS have been detected in surface and ground water worldwide, few studies provide information on the metabolic alterations or risks associated with their exposures. In this study, larval zebrafish were used to investigate the toxicity of early-life exposure to GenX or PFBS. Zebrafish were chronically exposed from 4 h post-fertilization (hpf) to 6 days post-fertilization (dpf) to 150 µM GenX or 95.0 µM PFBS. Ultra-high-performance liquid chromatography paired with high-resolution mass spectrometry was used to quantify uptake of GenX and PFBS into zebrafish larvae and perform targeted and untargeted metabolomics. Our results indicate that PFBS was 20.4 % more readily absorbed into the zebrafish larvae compared to GenX. Additionally, PFBS exposure significantly altered 13 targeted metabolites and 21 metabolic pathways, while GenX exposure significantly altered 1 targeted metabolite and 17 metabolic pathways. Exposure to GenX, and to an even greater extent PFBS, resulted in a number of altered metabolic pathways in the amino acid metabolism, with other significant alterations in the carbohydrate, lipid, cofactors and vitamins, nucleotide, and xenobiotics metabolisms. Our results indicate that GenX and PFBS impact the zebrafish metabolome, with implications of global metabolic dysregulation, particularly in metabolic pathways relating to growth and development.

Per- and polyfluoroalkyl substances (PFASs) in Chinese surface water: Temporal trends and geographical distribution

PFAS, recognized as persistent organic pollutants, present risks to both the ecological environment and human health. Studying PFASs in surface water yields insights into pollution dynamics. However, existing research on PFASs surface water pollution in China often focuses on specific regions, lacking comprehensive nationwide analyses. This study examined 48 research papers covering PFAS pollution in Chinese surface water, involving 49 regions and 1338 sampling sites. The results indicate widespread PFAS contamination, even in regions like Tibet. Predominant PFAS types include PFOA and PFOS, and pollution is associated with the relocation of industries from developed to developing countries post-2010. The shift from long-chain to short-chain PFASs aligns with recent environmental policy proposals. Geographic concentration of PFAS pollution correlates with industry distribution and economic development levels. Addressing point source pollution, especially from wastewater plant tailwater, is crucial for combating PFAS contamination. Greater emphasis should be placed on addressing short-chain PFASs.

Tracking down unknown PFAS pollution - The direct TOP assay in spatial monitoring of surface waters in Germany

PFAS contamination of surface waters in central Europe was investigated in a spatial monitoring using suspended particulate matter and sediment samples. The samples were collected in 2021 at 171 sampling sites in Germany and at five sites in Dutch waters. All samples were analyzed for 41 different PFAS by target analysis to establish a baseline for these compounds. In addition, a sum parameter approach (direct Total Oxidizable Precursor (dTOP) assay) was used to investigate the PFAS load in the samples more comprehensively. PFAS pollution varied widely between water bodies. Target analysis detected ∑PFAS concentrations between <0.5 and 53.1 μg kg-1 dry weight (dw), while levels of <1.0-337 μg kg-1 dw were determined by dTOP assay. Associations were observed for ∑PFSAdTOP and the percentage of urban area in the vicinity of the sampling sites and, less strongly, for distances to industrial sites (i.e. galvanic/paper) and airports. PFAS hotspots were identified by setting the 90th percentile of the data sets for ∑PFAStarget or ∑PFASdTOP as a threshold. Of the 17 hotspots identified by target analysis or dTOP assay, respectively, there were only six overlaps. Thus, 11 highly contaminated sites could not be identified by classical target analysis. The results demonstrate that target analysis captures only a fraction of the actual PFAS load, while unknown precursors remain undetected. Consequently, if only the results of target analysis are considered in assessments, there is a risk that sites heavily polluted with precursors will not be identified delaying mitigation actions and risking prolonged negative impacts on human health and ecosystems. Moreover, effective PFAS management requires establishing a baseline for PFAS using target and sum parameters such as the dTOP assay, and then monitoring this baseline on a regular basis to support emission control and to inform risk management of its effectiveness.

Life cycle assessment and life cycle cost analysis of anion exchange and granular activated carbon systems for remediation of groundwater contaminated by per- and polyfluoroalkyl substances (PFASs)

Anion exchange resin (AER) and granular activated carbon (GAC) have emerged as prominent technologies for treatment of waters contaminated with per- and polyfluoroalkyl substances (PFASs). This study compares the life cycle environmental impacts and life cycle costs of remediating PFAS-contaminated groundwater with these competing technologies, using field pilot data to inform model inputs. Comparative analysis indicates that AER systems employing single-use "PFAS-selective" resins have lower environmental impacts and costs than systems using regenerable resins or GAC adsorbents, supporting its use in future remediation efforts. Use of GAC operated as a single-use adsorbent led to the highest emissions as well as the highest treatment costs, with thermally-reactivated GAC proving to be less impactful than regenerable AER treatment. Sensitivity analyses highlighted the dominance of media usage rate (MUR), which is highly dependent on the selected PFAS treatment goals, to determine environmental impacts and costs over a 30-year system life cycle. Selection of very stringent changeout criteria (e.g., detection of any PFASs in effluent) significantly reduces the advantages of single-use resins. For regenerable AER, environmental impacts were dominated by management of the PFAS-contaminated brine/co-solvent waste stream used to regenerate the adsorbent, as well as the cosolvent content of the regenerant mixture and the cosolvent recovery efficiency achieved via on-site distillation. High impacts estimated for GAC adsorption, the result of high MUR relative to ion exchange media, can be significantly reduced if spent adsorbents are reused after thermal reactivation, but impacts are still greater than those predicted for single-use ion exchange systems. Findings are expected to hold across a range of diverse sites, including drinking water systems treating more dilute sources of PFAS contamination, as PFAS breakthrough was not found to be highly sensitive to sourcewater PFAS concentrations.

Suspect screening and total oxidizable precursor (TOP) assay as tools for characterization of per- and polyfluoroalkyl substance (PFAS)-contaminated groundwater and treated landfill leachate

Landfill facilities are a major source of release of per- and polyfluoroalkyl substances (PFAS) to the surrounding environment. In this study, landfill leachate treated in a conventional wastewater treatment plant and PFAS-contaminated groundwater were subjected to suspect screening analysis and semi-quantification using total oxidizable precursor (TOP) assay and liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS). TOP assays yielded expected results for legacy PFAS and their precursors, but showed no discernible evidence of degradation of perfluoroethylcyclohexane sulfonic acid. TOP assays also produced significant evidence of presence of precursors in both treated landfill leachate and groundwater, but the majority of precursors had probably degraded into legacy PFAS after many years in the landfill. Suspect screening identified a total of 28 PF AS, of which six were not included in the targeted method and were identified with confidence level (CL) ≥3. Semi-quantification of these six compounds showed very low concentrations, indicating that they are not as great a concern as the target PFAS.

Quantification and characterization of PFASs in suspended particulate matter (SPM) of German rivers using EOF, dTOPA, (non-)target HRMS

In this study, we compare analytical methods for PFAS determination-target analysis, non-target screening (NTS), direct total oxidizable precursor assay (dTOPA) and extractable organically bound fluorine (EOF). Therefore, suspended particulate matter (SPM) samples from German rivers at different locations in time series from 2005 to 2020 were analyzed to investigate temporal and spatially resolved trends. In this study 3 PFAS mass balances approaches were utilized: (i) PFAA target vs. PFAS dTOPA, (ii) PFAS target vs. EOF and (iii) PFAS target vs. PFAS dTOPA vs. organofluorines NTS vs. EOF. Mass balance approach (i) revealed high proportions of precursor substances in SPM samples. For the time resolved analysis an increase from 94% (2005) to 97% in 2019 was observable. Also for the spatial resolved analysis precursor proportions were high with >84% at all sampling sites. Mass balance approach (ii) showed that the unidentified EOF (uEOF) fraction increased over time from 82% (2005) to 99% (2019). Furthermore, along the river courses the uEOF increased. In the combined mass balance approach (iii) using 4 different analytical approaches EOF fractions were further unraveled. The EOF pattern was fully explainable at the sampling sites at Saar and Elbe rivers. For the time resolved analysis, an increased proportion of the EOF was now explainable. However, still 27% of the EOF for the time resolved analysis and 25% of the EOF for the spatial resolved analysis remained unknown. Therefore, in a complementary approach, both the EOF and dTOPA reveal unknown gaps in the PFAS mass balance and are valuable contributions to PFAS risk assessment. Further research is needed to identify organofluorines summarized in the EOF parameter.

Evaluation of per- and polyfluoroalkyl substances (PFAS) in leachate, gas condensate, stormwater and groundwater at landfills

Per- and polyfluoroalkyl substances (PFAS), found in many consumer products, are commonly disposed of in landfills at the end of their service lives. To identify landfill liquids that should be prioritized for treatment, this study aimed to evaluate PFAS levels in different aqueous samples from landfills and identify relationships between PFAS and landfill characteristics. Twenty-six PFAS including 11 perfluoroalkyl carboxylic acids (PFCAs), 7 perfluoroalkyl sulfonates (PFSAs), and 8 perfluoroalkyl acid precursors (PFAA-precursors) were measured in municipal solid waste (MSW) leachate, construction and demolition debris (CDD) leachate, municipal solid waste incineration (MSWI) ash leachate, gas condensate, stormwater, and groundwater from landfills. Based on the median, results show that PFAS levels in MSW leachate were the highest (10,000 ng L-1), CDD leachate were intermediate (6200 ng L-1), and MSWI ash leachate were the lowest (1300 ng L-1) among the leachates evaluated. PFAS levels in gas condensate (7000 ng L-1) were similar to MSW leachate. PFAS in stormwater and groundwater were low (medians were less than 500 ng L-1). Dominant subgroups included PFCAs and PFAA-precursors in all leachates. PFSAs were also found in CDD leachate, PFAA-precursors in gas condensate, and PFCAs in stormwater and groundwater. Landfill characteristics significantly correlated with ∑26PFAS included waste proportions (percentage of MSWI ash in landfill, |rs| = 0.22), operational status (active or not, |rs| = 0.27) and rainfall (30-d cumulative rainfall, |rs| = 0.39). The results from this study can be used to prioritize which landfills and which reservoir of liquids (and corresponding subgroup of PFAS) to target for PFAS management.

Spatial distribution, compositional profile, sources, ecological and human health risks of legacy and emerging per- and polyfluoroalkyl substances (PFASs) in freshwater reservoirs of Punjab, Pakistan

Per- and polyfluoroalkyl substances (PFASs) are a large group of chemicals reported in global environment and are responsible for various adverse impacts on humans and environment. We report a comprehensive study on occurrence of PFASs, including legacy, substitute and emerging ones, from Pakistan. Surface water samples were collected from five ecologically important freshwater reservoirs in Pakistan, namely, Head Panjnad (HP), Head Trimmu (HT), Chashma Barrage (CB), Head Blloki (HB), and Head Qadirabad (HQ). The detection frequencies of PFASs ranged between 37 %-100 %. The highest concentration of ∑₁₅PFASs was detected at HP (114.1 ng L^-1), whereas the lowest at HQ (19.9 ng L^-1). Among the analyzed PFASs, 6:2 fluorotelomer sulfonic acid (6:2 FTS) and perfluorooctanoic acid (PFOA) showed maximum mean concentrations of 9.1 ng L^-1 and 7 ng L^-1 at HP, followed by Perfluorooctane sulfonic acid (PFOS) with level of 0.99 ng L^-1 at HT. The ecological risk assessment for selected species i.e., daphnid, mysid, fish and green algae showed that PFOS, perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA) exhibited moderate risk i.e., Hazard Quotients (HQs) < 1 to the modeled organisms, whereas perfluorobutane sulfonic acid (PFBS) showed the high risk to green algae (HQs = 8.6) and PFOA presented a high risk to all the organisms (HQs ranged between 1.04 and 7.38). The level of ∑PFASs at HP (114.1 ng L^-1) exceed the EU guideline value of ∑PFASs in water (100 ng L^-1), however the risk quotient (RQ_mix) values of all age groups were < 1 implying that the detected PFASs in water do not pose risk to human health. Source apportionment through Positive Matrix Factorization (PMF) showed that industrial effluent is the main source of PFASs in freshwater reservoirs. Comparable concentrations of legacy and substitute PFASs in this study indicate that legacy PFASs are still in use adjacent to ecologically important water reservoirs.

Pilot study comparison of regenerable and emerging single-use anion exchange resins for treatment of groundwater contaminated by per- and polyfluoroalkyl substances (PFASs)

This study reports the results of an 8-month pilot study comparing both regenerable and emerging single-use anion exchange resins (AERs) for treatment of per- and polyfluoroalkyl substances (PFASs) at a source zone impacted by historical use of aqueous film-forming foam (AFFF). Two regenerable (Purolite A860 and A520E) and three single-use (Purolite PFA694E, Calgon CalRes 2301, and Dowex PSR2+) AERs were tested in parallel, collecting effluent samples after treatment for 30-sec and 2-min total empty bed contact time (EBCT). Results demonstrate that single-use AERs significantly outperform regenerable resins, particularly for treatment of long-chain perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs). No detectable concentrations of ≥C7 PFCAs or PFSAs were observed within 150,000 bed volumes (BVs) after treatment with the single-use resins (2-min EBCT). Analysis of effluent samples following 30-sec EBCT treatment shows that even the shortest-chain PFSAs do not reach 50% breakthrough within the first 350,000 BVs, though differences in removal of short-chain PFCAs was less dramatic. The regenerable polyacrylic A860 resin performed very poorly compared to all polystyrene resins, with >90% breakthrough of all PFASs occurring within 10,000 BVs. The greater affinity of polystyrene resins is attributed to increased hydrophobic interactions in addition to electrostatic ion exchange. Analysis of breakthrough profiles reveals empirical correlation with ion exchange affinity coefficients (logK_ex) measured in batch experiments. Postmortem analysis of PFASs extracted from spent resins revealed chromatographic elution behavior and competition among PFASs for adsorption to the resins. PFSAs and long-chain PFCAs were preferentially adsorbed to earlier sections in the AER columns, whereas short-chain PFCAs were competitively displaced towards the later sections of the columns and into the effluent, consistent with effluent concentrations of the latter structures exceeding influent values. These results provide insights into the mechanisms that govern PFAS adsorption to AERs in real multisolute groundwater matrices and support findings from other diverse sites regarding PFAS affinity, elution behavior, and competition for exchange sites.

Effects of exposure to per- and polyfluoroalkyl substances on vaccine antibodies: A systematic review and meta-analysis based on epidemiological studies

Vaccines are essential for children to defend against infection. Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants with the characteristics of persistence and bioaccumulation. PFAS exposure can affect the function of the nervous, endocrine, and immune system of animals and humans. We aimed to conduct a systematic review and meta-analysis of the epidemiological studies investigating potential relationships between PFAS exposure and vaccine antibody levels, and assessed whether PFAS would affect vaccine response in healthy children. A literature search was conducted in PubMed, Web of Science, and Scopus databases up to February 2022. We chose studies that measured serum vaccines antibodies and PFAS concentrations of the participants. Essential information, including mean difference of percentage change, regression coefficient, odds ratio, Spearman correlation coefficient, and 95% confidence intervals, were extracted from the selected studies to conduct descriptive analysis and meta-analysis where appropriate. The qualities of these studies were evaluated as well. Finally, nine epidemiological studies about children met our inclusion criteria. A high degree of heterogeneity is observed in terms of breastfeeding time, confounder control, and detection method. Exposure to perfluorooctanoic acid and perfluorohexane sulfonic acid is negatively associated with tetanus antibody level in children without heterogeneity by Cochran's Q test (p = 0.26; p = 0.55), and exposure to perfluorohexane sulfonate is negatively associated with tetanus antibody level but with heterogeneity (p = 0.04). This comprehensive review suggests that PFAS can have adverse health effects on children by hindering the production of vaccine antibodies. There are some consistent and negative associations between children exposure to certain PFAS and tetanus antibody level. The association of the other four vaccines (measles, rubella, mumps, and influenza) with PFAS remains uncertain, because very few studies are available. Further studies are needed to validate the possible associations.

Ultra-Short-Chain PFASs in the Sources of German Drinking Water: Prevalent, Overlooked, Difficult to Remove, and Unregulated

Per- and polyfluoroalkyl substances (PFASs) have been a focal point of environmental chemistry and chemical regulation in recent years, culminating in a shift from individual PFAS regulation toward a PFAS group regulatory approach in Europe. PFASs are a highly diverse group of substances, and knowledge about this group is still scarce beyond the well-studied, legacy long-chain, and short-chain perfluorocarboxylates (PFCAs) and perfluorosulfonates (PFSAs). Herein, quantitative and semiquantitative data for 43 legacy short-chain and ultra-short-chain PFASs (≤2 perfluorocarbon atoms for PFCAs, ≤3 for PFSAs and other PFASs) in 46 water samples collected from 13 different sources of German drinking water are presented. The PFASs considered include novel compounds like hexafluoroisopropanol, bis(trifluoromethylsulfonyl)imide, and tris(pentafluoroethyl)trifluorophosphate. The ultra-short-chain PFASs trifluoroacetate, perfluoropropanoate, and trifluoromethanesulfonate were ubiquitous and present at the highest concentrations (98% of sum target PFAS concentrations). "PFAS total" parameters like the adsorbable organic fluorine (AOF) and total oxidizable precursor (TOP) assay were found to provide only an incomplete picture of PFAS contamination in these water samples by not capturing these highly prevalent ultra-short-chain PFASs. These ultra-short-chain PFASs represent a major challenge for drinking water production and show that regulation in the form of preventive measures is required to manage them.

A fast and simple PFAS extraction method utilizing HR-CS-GFMAS for soil samples

Here, we describe an optimized fast and simple extraction method for the determination of per- and polyfluorinated alkyl substances (PFASs) in soils utilizing high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS). To omit the bias of the solid phase extraction (SPE) step commonly used during the analysis of extractable organically bound fluorine (EOF) we optimized a fast and simple SPE-free extraction method. The developed extraction method consists of a liquid-solid extraction using acidified methanol without any additional SPE. Four extraction steps were representative to determine a high proportion of the EOF (>80% of eight extractions). Comparison of the optimized method with and without an additional SPE clean-up step revealed a drastic underestimation of EOF concentrations using SPE. Differences of up to 94% were observed which were not explainable by coextracted inorganic fluoride. Therefore, not only a more accurate but also a more economic as well as ecologic method (bypassing of unnecessary SPE) was developed. The procedural limit of quantification (LOQ) of the developed method was 10.30 μg/kg which was sufficient for quantifying EOF concentrations in all tested samples. For future PFAS monitoring and potential regulative decisions the herein presented optimized extraction method can offer a valuable contribution.

Per- and polyfluoroalkyl substances in water and wastewater: A critical review of their global occurrence and distribution

Per- and polyfluoroalkyl substances (PFAS) are a family of fluorinated organic compounds of anthropogenic origin. Due to their unique chemical properties, widespread production, environmental distribution, long-term persistence, bioaccumulative potential, and associated risks for human health, PFAS have been classified as persistent organic pollutants of significant concern. Scientific evidence from the last several decades suggests that their widespread occurrence in the environment correlates with adverse effects on human health and ecology. The presence of PFAS in the aquatic environment demonstrates a close link between the anthroposphere and the hydrological cycle, and concentrations of PFAS in surface and groundwater range in value along the ng L^-1-μg L^-1 scale. Here, we critically reviewed the research published in the last decade on the global occurrence and distribution of PFAS in the aquatic environment. Ours is the first paper to critically evaluate the occurrence of PFAS at the continental scale and the evolving global regulatory responses to manage and mitigate the adverse human health risks posed by PFAS. The review reports that PFAS are widespread despite being phased out-they have been detected in different continents irrespective of the level of industrial development. Their occurrence far from the potential sources suggests that long-range atmospheric transport is an important pathway of PFAS distribution. Recently, several studies have investigated the health impacts of PFAS exposure-they have been detected in biota, drinking water, food, air, and human serum. In response to the emerging information about PFAS toxicity, several countries have provided administrative guidelines for PFAS in water, including Canada, the United Kingdom, Sweden, Norway, Germany, and Australia. In the US, additional regulatory measures are under consideration. Further, many PFAS have now been listed as persistent organic pollutants. This comprehensive review provides crucial baseline information on the global occurrence, distribution, and regulatory framework of PFAS.

Identifying emerging environmental concerns from long-chain chlorinated paraffins towards German ecosystems

Germany is one of several major European producers of chlorinated paraffins (CPs). This study showed that not only the legacy short-chain products (SCCPs, C_10-13), but also the current-use medium- and long-chain products (MCCPs, C_14-17; LCCPs, C_>17) as well as the very-short-chain impurities (vSCCPs, C_<10) are ubiquitous in the 72 samples collected from the coastal, terrestrial, and freshwater ecosystems across the country. The concentrations of LCCPs surpassed those of the other CPs in 40% of the biota samples. Archived bream samples collected downstream of a CP-manufacturing factory showed decreasing temporal trends of (v)SCCPs and relatively constant levels of MCCPs from 1995 to 2019; however, the overall levels of LCCPs have increased by 290%, reflecting the impact of chemical regulation policies on changes in CP production. A visualization algorithm was developed for integrating CP results from various matrices to illustrate spatial tendencies of CP pollution. Higher levels of (v)SCCPs were indicated in the former West Germany region, while MCCP and LCCP concentrations did not seem to differ between former East and West Germany, suggesting relatively equal production and use of these chemicals after the German Reunification. The results provide an early warning signal of environmental concerns from LCCPs on the eve of their booming global production and use.

Per- and polyfluoroalkyl substances in the environment

Over the past several years, the term PFAS (per- and polyfluoroalkyl substances) has grown to be emblematic of environmental contamination, garnering public, scientific, and regulatory concern. PFAS are synthesized by two processes, direct fluorination (e.g., electrochemical fluorination) and oligomerization (e.g., fluorotelomerization). More than a megatonne of PFAS is produced yearly, and thousands of PFAS wind up in end-use products. Atmospheric and aqueous fugitive releases during manufacturing, use, and disposal have resulted in the global distribution of these compounds. Volatile PFAS facilitate long-range transport, commonly followed by complex transformation schemes to recalcitrant terminal PFAS, which do not degrade under environmental conditions and thus migrate through the environment and accumulate in biota through multiple pathways. Efforts to remediate PFAS-contaminated matrices still are in their infancy, with much current research targeting drinking water.

Regeneration of per- and polyfluoroalkyl substance-laden granular activated carbon using a solvent based technology

Per- and polyfluoroalkyl substances (PFAS) are a large class of chemicals widely used for many commercial and industrial applications and have resulted in contamination at sites across globally. Pump-and-treat systems, groundwater extraction, and ex situ treatment using granular activated carbon (GAC) are being implemented, either in full or pilot scale, to treat PFAS-impacted groundwater and drinking water. The only current method of regenerating spent GAC is to reactivate it at temperatures greater than 1000 °C, which requires large amounts of energy and is quite expensive. This research focused on development and demonstration of an effective GAC regeneration technology using a solvent-based method for PFAS-laden GAC used in water treatment. Two different organic solvents (ethanol and isopropyl alcohol) with 0.5% and 1.0% ammonium hydroxide (NH₄OH) as a base additive were tested to determine the most effective regenerant solution to remove PFAS from the contaminated GAC. Based on column tests using laboratory-contaminated GAC with perfluorooctanoic acid (PFOA) and perfluorooctanoic sulfonate (PFOS), the solvent-base mix (SBM) of ethanol with 0.5% NH₄OH was found to be the optimum performing regenerant solution. The GAC life span assessment showed that solvent-regenerated GAC performed similar to virgin GAC without losing its optimal performance of PFAS sorption. Further, the solvent-regenerated GAC showed optimal performance even after four cycles of solvent regenerations tested using the optimum SBM. Average percent removal in laboratory-contaminated GAC using the optimum SBM was 65% and 93% for PFOS and PFOA, respectively. Four field-spent GAC samples were also regenerated using the optimum SBM. Percent removal from these samples was found to be in range of 55%-68%. The type of GAC used, level of contamination and type of PFAS present, water type and quality, and the presence of co-contaminants may have influenced the removal capacity. Distillation experiments have shown that it is feasible to concentrate the spent solvent prior to disposal, which reduces the amount of PFAS-contaminated solvent waste produced in regeneration cycles.

Legacy and novel perfluoroalkyl and polyfluoroalkyl substances in industrial wastewater and the receiving river water: Temporal changes in relative abundances of regulated compounds and alternatives

Concentrations of 28 novel and legacy perfluoroalkyl and polyfluoroalkyl substances (PFASs) in wastewater from 77 industrial plants in the largest industrial complex in Korea were determined. The industrial plants were of eight types (advanced electronic, battery, chemical, general electronic, glass and ceramic, metal, polymer, and textile). PFAS concentrations in river water receiving the wastewater were determined to assess the impact of wastewater from the industrial complex. Only 19 and nine target PFASs were detected in untreated industrial wastewater and river water, respectively. Novel PFASs such as F53B (6:2 chlorinated polyfluoroalkyl ether sulfonate) were not detected. The mean PFASs concentration in industrial wastewater treatment plant effluent was 5.18 µg/L. The mean total PFASs concentration was highest in advanced electronic plant effluent, second highest in general electronic plant effluent, and lowest in battery and chemical plant effluents. Perfluorohexane sulfonate was the dominant homolog, being detected in effluent from plants of all classes and contributing 96% of total discharged PFASs by mass. Perfluorooctane sulfonate (included in the Stockholm Convention) use has decreased markedly since previous studies. Perfluorooctane sulfonate has largely been replaced by PFASs with fewer than seven carbon atoms. A similar change was found for river water receiving industrial wastewater.

Correlation Analysis of Perfluoroalkyl Substances in Regional U.S. Precipitation Events

Per- and polyfluoroalkyl substances (PFAS) are transported in the atmosphere, leading to both wet and dry deposition to the surface. The concentrations of 15 PFAS were measured at six locations in the Ohio-Indiana region of the U.S. during the summer of 2019 and compared to samples collected at a distant site in NW Wyoming. ΣPFAS concentrations ranged from 50-850 ng L^-1, with trifluoroacetic acid (TFA) being the dominant compound (~90%). Concentrations of perfluorooctanoic acid (PFOA) and perfluorosulfonic acid (PFOS) were similar to amounts observed over the past 20 years, indicating persistence in the atmosphere despite regulatory action, and the newer species HFPO-DA (GenX) was also widely detected in rainwater. ANOVA modeling and correlation matrices were used to determine association of PFAS concentrations, location, and functional group and chain length. Statistically significant differences (p < 0.05) in PFAS profiles across sites separated by 10-100 km indicate that local point sources strongly contribute to wet deposition. This work introduces correlation plots for PFAS that allow rapid visual comparison of multi-analyte and multi-site data sets.

Human biomonitoring of per- and polyfluoroalkyl substances in German blood plasma samples from 1982 to 2019

The findings of per- and polyfluoroalkyl substances (PFAS) in humans and the environment all over the world have raised concerns and public awareness for this group of man-made chemicals. In the last three decades, this led to different regulatory restrictions for specific PFAS as well as shifts in the production and usage of these substances. In this study, we analyzed the PFAS levels of 100 human blood plasma samples collected from 2009 to 2019 for the German Environmental Specimen Bank (ESB) to further elucidate the time course of exposure towards this substance group as shown by Schröter-Kermani et al., (2013) with samples from 1982 to 2010. A spectrum of 37 PFAS, including perfluorocarboxylic (PFCA) and -sulfonic acids (PFSA) as well as potential precursors and substitutes like ADONA, GenX or F-53B was analyzed by UHPLC coupled with high-resolution mass spectrometry. Validation was successful for 33 of the substances. The two legacy substances perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) were detected in every sample of the 2009-2019 dataset and showed the highest concentrations with ranges of 0.27-14.0 ng/mL and 1.21-14.1 ng/mL, respectively. A significant portion of total PFOS analytes was present as branched isomers (mean: 34 ± 7%). High detection frequencies of 95% and 82% were also found for perfluorohexane sulfonic acid (PFHxS) and perfluorononanoic acid (PFNA), respectively, but in lower concentrations (PFHxS: <LOQ - 4.62 ng/mL; PFNA: <LOQ - 3.66 ng/mL) than PFOA and PFOS. Besides other PFCA and PFSA only 8:2 fluorotelomer sulfonic acid (8:2 FtS) and N-methyl perfluorooctane sulfonamidoacetic acid were detected in very few samples. In combination with the previous results from 1982 to 2010, declining temporal trends were observed for all PFAS (PFOA, PFNA, PFHxS, and PFOS) frequently detected in the ESB samples. The results of this study indicate a decrease in human exposure to known PFAS in Germany over the last three decades and emphasize the importance of long-term human biomonitoring studies for investigating the effects of chemical regulation.

Transfer of Per- and Polyfluoroalkyl Substances (PFAS) from Feed into the Eggs of Laying Hens. Part 1: Analytical Results Including a Modified Total Oxidizable Precursor Assay

The group of per- and polyfluoroalkyl substances (PFAS) comprises thousands of chemicals, which are used in various industrial applications and consumer products. In this study, a feeding experiment with laying hens and feed grown on a contamination site was conducted, and PFAS were analyzed in the feed and eggs to assess the transfer of PFAS into eggs. A targeted analysis of perfluoroalkyl acids (PFAAs) and different sulfonamides was performed. Additionally, the total oxidizable precursor (TOP) assay was modified by fully oxidizing small amounts of the samples instead of oxidizing their extracts in order to overcome potential losses during extraction. Targeted analysis showed the presence of known PFAAs and four sulfonamides in the feed and egg yolk samples. In the plant-based feed, short-chain PFAAs, methyl and ethyl perfluorooctane sulfonamidoacetic acid (Me- and EtFOSAA), and perfluorooctane sulfonic acid (PFOS) were the most abundant PFAS. In the eggs, PFOS, FOSAA, and its alkylated homologues showed the highest concentrations. The TOP assay revealed the presence of substantial amounts of precursors with different chain lengths from C4 to C8. The highest relative increase of PFOA after oxidation was observed in egg yolk from the end of the exposure period (828%). The results of this study demonstrate the transfer of PFAAs and their precursors into hens' eggs and emphasize the contribution of (known and unidentified) precursors to the overall PFAS burden in edible products. The modified TOP assay approach was shown to be a powerful tool to better assess the total burden of samples with PFAS.

Transcriptomic response of Gordonia sp. strain NB4-1Y when provided with 6:2 fluorotelomer sulfonamidoalkyl betaine or 6:2 fluorotelomer sulfonate as sole sulfur source

Abstract

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are environmental contaminants of concern. We previously described biodegradation of two PFAS that represent components and transformation products of aqueous film-forming foams (AFFF), 6:2 fluorotelomer sulfonamidoalkyl betaine (6:2 FTAB) and 6:2 fluorotelomer sulfonate (6:2 FTSA), by Gordonia sp. strain NB4-1Y. To identify genes involved in the breakdown of these compounds, the transcriptomic response of NB4-1Y was examined when grown on 6:2 FTAB, 6:2 FTSA, a non-fluorinated analog of 6:2 FTSA (1-octanesulfonate), or MgSO₄, as sole sulfur source. Differentially expressed genes were identified as those with ± 1.5 log₂-fold-differences (± 1.5 log₂FD) in transcript abundances in pairwise comparisons. Transcriptomes of cells grown on 6:2 FTAB and 6:2 FTSA were most similar (7.9% of genes expressed ± 1.5 log₂FD); however, several genes that were expressed in greater abundance in 6:2 FTAB treated cells compared to 6:2 FTSA treated cells were noted for their potential role in carbon–nitrogen bond cleavage in 6:2 FTAB. Responses to sulfur limitation were observed in 6:2 FTAB, 6:2 FTSA, and 1-octanesulfonate treatments, as 20 genes relating to global sulfate stress response were more highly expressed under these conditions compared to the MgSO₄ treatment. More highly expressed oxygenase genes in 6:2 FTAB, 6:2 FTSA, and 1-octanesulfonate treatments were found to code for proteins with lower percent sulfur-containing amino acids compared to both the total proteome and to oxygenases showing decreased expression. This work identifies genetic targets for further characterization and will inform studies aimed at evaluating the biodegradation potential of environmental samples through applied genomics.

Graphic Abstract

Electronic supplementary material

The online version of this article (10.1007/s10532-020-09917-8) contains supplementary material, which is available to authorized users.

Are (fluorinated) ionic liquids relevant environmental contaminants? High-resolution mass spectrometric screening for per- and polyfluoroalkyl substances in environmental water samples led to the detection of a fluorinated ionic liquid

Fragmentation flagging (FF), a high-resolution mass spectrometric screening variant that utilizes intentionally produced indicative in-source fragments, was used to screen for per- and polyfluoroalkyl substances (PFASs) in surface waters. Besides expected legacy PFAS, FF enabled the detection of some rarely investigated representatives, such as trifluoromethanesulfonic acid (TFMSA). Additionally, a novel PFAS was detected and identified as tris(pentafluoroethyl)trifluorophosphate (FAP) via MS/MS experiments and confirmed with a reference standard. The first monitoring of FAP in 20 different surface waters revealed a localized contamination affecting three connected rivers with peak concentrations of up to 3.4 μg/L. To the best of our knowledge, this is the first time FAP has been detected in environmental water samples. The detection of FAP, which is exclusively used as a constituent of ionic liquids (ILs), raises questions about the environmental relevance of ILs in general and particularly fluorinated ILs. A following comprehensive literature search revealed that ILs have already been intensely discussed as potential environmental contaminants, but findings reporting ILs in environmental (water) samples are almost non-existent. Furthermore, we address the relevance of ILs in the context of persistent, mobile, and toxic chemicals, which are at present gaining increasing scientific and regulatory interest, and as part of the PFAS "dark matter" that represents the gap between the amount of fluorine originating from known PFAS and the total adsorbable organically bound fluorine. Graphical abstract.

Visible and UV photocatalysis of aqueous perfluorooctanoic acid by TiO2 and peroxymonosulfate: Process kinetics and mechanistic insights

The global occurrence and adverse environmental impacts of perfluorooctanoic acid (PFOA) have attracted wide attention. This study focused on the PFOA photodegradation by using photocatalyst TiO₂ with peroxymonosulfate (PMS) activation. Aqueous PFOA (50 mg L^-1) at the pH 3 was treated by TiO2/PMS under 300 W visible light (400-770 nm) or 32 W UV light (254 nm and 185 nm). The addition of PMS induced a significant degradation of PFOA under powerful visible light compared with sole TiO₂. Under visible light, 0.25 g L^-1 TiO₂ and 0.75 g L^-1 PMS in the solution with the initial pH 3 provided optimum condition which achieved 100% PFOA removal within 8 h. Under UV light irradiation at 254 nm and 185 nm wavelength, TiO₂/PMS presented excellent performance of almost 100% removal of PFOA within 1.5 h, attributed to the high UV absorbance by the photocatalyst. The intermediates analysis showed that PFOA was degraded from a long carbon chain PFOA to shorter chain intermediates in a stepwise manner. Furthermore, scavenger experiments indicated that SO₄^•-radicals from PMS and photogenerated holes from TiO₂ played an essential role in degrading PFOA. The presence of organic compounds in real wastewater reduced the degradation efficacy of PFOA by 18-35% in visible/TiO₂/PMS system. In general, TiO₂/PMS could be an ideal and effective photocatalysis system for the degradation of PFOA from wastewater using either visible or UV light source.

Analysis of mobile chemicals in the aquatic environment-current capabilities, limitations and future perspectives

Persistent and mobile water contaminants are rapidly developing into a focal point of environmental chemistry and chemical regulation. Their defining parameter that sets them apart from the majority of regularly monitored and regulated contaminants is their mobility in the aquatic environment, which is intrinsically tied to a high polarity. This high polarity, however, may have severe implications in the analytical process and thus the most polar of these mobile contaminants may not be covered by widely utilized trace-analytical methods, and thus, alternatives are required. In this review, we infer the physical and chemical properties of mobile water contaminants from a set of almost 1800 prioritized REACH chemicals and discuss the implications these substance properties may have on four integral steps of the analytical process: sampling and sample storage, sample pre-treatment, separation and detection. We discuss alternatives to widely utilized trace-analytical methods, examine their application range and limitations, highlight potential analytical techniques on the horizon and emphasize research areas we believe still offer the most room for further improvement. While we have a comprehensive set of analytical methods to cover a large portion of the known mobile chemicals, these methods are still only infrequently utilized. Graphical abstract.