Cathodic photoelectrochemical bioanalysis

Near-infrared light-driven lab-on-paper cathodic photoelectrochemical aptasensing for di(2-ethylhexyl)phthalate based on AgInS2/Cu2O/FeOOH photocathode

Di(2-ethylhexyl)phthalate (DEHP) is commonly released from plastics in aqueous environment, which can disrupt endocrine system and cause adverse effects on public health. There is a pressing need to highly sensitive detect DEHP. Herein, a near-infrared (NIR) light-driven lab-on-paper cathodic photoelectrochemical aptasensing platform integrated with AgInS2/Cu2O/FeOOH photocathode and "Y"-like ternary conjugated DNA nanostructure-mediated "ON-OFF" catalytic switching of hemin monomer-to-dimer was established for ultrasensitive DEHP detection. Profiting from the collaborative roles of the effective photosensitization of NIR-response AgInS2 and the fast hole extraction of FeOOH, the NIR light-activated AgInS2/Cu2O/FeOOH photocathode generated a markedly enhanced photocathodic signal. The dual hemin-labelled "Y"-like ternary conjugated DNA nanostructures made the hemin monomers separated in space and they maintained highly active to catalyze in situ generation of electron acceptors (O2). The hemin monomers were relocated in close proximity with the help of target-induced allosteric change of DNA nanostructures, which could spontaneously dimerize into catalytically inactive hemin dimers and fail to mediate electron acceptors generation, resulting in a decreased photocathodic signal. Therefore, the ultrasensitive DEHP detection was realized with a linear response range of 1 pM-500 nM and a detection limit of 0.39 pM. This work rendered a promising prototype to construct powerful paper-based photocathodic aptasensing system for sensitive and accurate screening of DEHP in aqueous environment.

Dual amplification for PEC ultrasensitive aptasensing of biomarker HER-2 based on Z-scheme UiO-66/CdIn2S4 heterojunction and flower-like PtPdCu nanozyme

As an important prognostic indicator in breast cancer, human epithelial growth factor receptor-2 (HER-2) is of importance for assessing prognosis of breast cancer patients, whose accurate and facile analysis are imperative in clinical diagnosis and treatment. Herein, photoactive Z-scheme UiO-66/CdIn2S4 heterojunction was constructed by a hydrothermal method, whose optical property and photoactivity were critically investigated by a range of techniques, combined by elucidating the interfacial charge transfer mechanism. Meanwhile, PtPdCu nanoflowers (NFs) were fabricated by a simple aqueous wet-chemical method, whose peroxidase (POD)-mimicking catalytic activity was scrutinized by representative tetramethylbenzidine (TMB) oxidation in H2O2 system. Taken together, the UiO-66/CdIn2S4 based photoelectrochemical (PEC) aptasensor was established for quantitative analysis of HER-2, where the detection signals were further magnified through catalytic precipitation reaction towards 4-chloro-1-naphthol (4-CN) oxidation (assisted by the PtPdCu NFs nanozyme). The PEC aptasensor presented a broader linear range within 0.1 pg mL-1-0.1 μg mL-1 and a lower limit of detection of 0.07 pg mL-1. This work developed a new PEC aptasensor for ultrasensitive determination of HER-2, holding substantial promise for clinical diagnostics.

Self-powered molecularly imprinted photoelectrochemical sensor based on Ppy/QD/HOF heterojunction for the detection of bisphenol A

As an emerging porous material, hydrogen-bonded organic framework materials (HOFs) still pose application challenges. In this work, the designed type "I + II" heterojunction extracted hot electrons from HOFs using quantum dots (QDs) and polypyrrole (Ppy), improving the stability and photoelectrochemical performance of materials. In addition to serving as a potential well, electropolymerized Ppy was used as a recognition element for bisphenol A (BPA), and a novel self-powered molecularly imprinted photoelectrochemical (MIP-PEC) sensor was designed. The sensing platform showed a linear relationship from 1 × 10-10 to 1 × 10-7 mol∙L-1 and from 1 × 10-7 to 1 mol∙L-1 with an acceptable detection limit of 4.2 × 10-11 mol∙L-1. This is the first application of HOFs in constructing MIP-PEC sensors and a new attempt to improve the stability of HOFs for the application of porous crystal materials in the sensing field.

A sensitive immunosensing platform based on the high cathodic photoelectrochemical activity of Zr-MOF and dual-signal amplification of peroxidase-mimetic Fe-MOF

Cathodic photoelectrochemical (PEC) analysis has received special concerns because of its outstanding anti-interference capability toward reductive substances in samples, so it is highly desirable to develop high-performance photocathodic materials for PEC analysis. Herein, a Zr-based metal-organic framework (Zr-MOF), MOF-525, is explored as a photoactive material in aqueous solution for the first time, which shows a narrow band-gap of 1.82 eV, excellent visible-light absorption, and high cathodic PEC activity. A sandwiched-type PEC immunosensor for detecting prostate-specific antigen (PSA) is fabricated by using MIL-101-NH2(Fe) label and MOF-525 photoactive material. MIL-101-NH2(Fe) as a typical Fe-MOF can serve as a peroxidase mimic to catalyze the production of precipitates on the photoelectrode. Both the produced precipitates and the MIL-101-NH2(Fe) labels can quench the photocathodic current, enabling "signal-off" immunosensing of PSA. The detection limit is 3 fg mL-1, and the linear range is between 10 fg mL-1 and 100 ng mL-1 for detecting PSA. The present study not only develops a high-performance Zr-MOF photoactive material for cathodic PEC analysis but also constructs a sensitive PEC immunosensing platform based on the dual-signal amplification of peroxidase-mimetic Fe-MOF.

Enhanced split-type photoelectrochemical aptasensor incorporating a robust antifouling coating derived from four-armed polyethylene glycol

Antifouling biosensors capable of preventing protein nonspecific adhesion in real human bodily fluids are highly sought-after for precise disease diagnosis and treatment. In this context, an enhanced split-type photoelectrochemical (PEC) aptasensor was developed incorporating a four-armed polyethylene glycol (4A-PEG) to construct a robust antifouling coating, enabling accurate and sensitive bioanalysis. The split-type PEC system involved the photoelectrode and the biocathode, effectively separating signal converter with biorecogniton events. Specifically, the TiO2 electrode underwent sequential modification with ZnIn2S4 (ZIS) and polydopamine (PDA) to form the PDA/ZIS/TiO2 photoelectrode. The cathode substrate was synthesized as a hybrid of N-doped graphene loaded with Pt nanoparticles (NG-Pt), and subsequently modified with 4A-PEG to establish a robust antifouling coating. Following the anchoring of probe DNA (pDNA) on the 4A-PEG-grafted antifouling coating, the biocathode for model target of cancer antigen 125 (CA125) was obtained. Leveraging pronounced photocurrent output of the photoelectrode and commendable antifouling characteristics of the biocathode, the split-type PEC aptasensor showcased exceptional detection performances with high sensitivity, good selectivity, antifouling ability, and potential feasibility.

In Situ Growth Reaction on Photoelectrodes of Single-Atom Fe Incorporated Bi4O5I2: A General Photoelectrochemical Immunoassay Toward Sensitive Protein Analysis

As one of the interesting signaling mechanisms, the in situ growth reaction on a photoelectrode has proven its powerful potential in photoelectrochemical (PEC) bioanalysis. However, the specific interaction between the signaling species with the photoactive materials limits the general application of the signal mechanism. Herein, on the basis of an in situ growth reaction on a photoelectrode of single-atom-based photoactive material, a general PEC immunoassay was developed in a split-type mode consisting of the immunoreaction and PEC detection procedure. Specifically, a single-atom photoactive material that incorporates Fe atoms into layered Bi4O5I2 (Bi4O5I2-Fe SAs) was used as a photoelectrode for PEC detection. The sandwich immunoreaction was performed in a well of a 96-well plate using Ag nanoparticles (Ag NPs) as signal tracers. In the PEC detection procedure, the Ag+ converted from Ag NPs were transferred onto the surface of the Bi4O5I2-Fe SAs photoelectrode and thereafter AgI was generated on the Bi4O5I2-Fe SAs in situ to form a heterojunction through the reaction of Ag+ with Bi4O5I2-Fe SAs. The formation of heterojunction greatly promoted the electro-hole separation, boosting the photocurrent response. Exemplified by myoglobin (Myo) as the analyte, the immunosensor achieved a wide linear range from 1.0 × 10-11 to 5.0 × 10-8 g mL-1 with a detection limit of 3.5 × 10-12 g mL-1. This strategy provides a general PEC immunoassay for disease-related proteins, as well as extends the application scope of in situ growth reaction in PEC analysis.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

Recent Trends in Self-Powered Photoelectrochemical Sensors: From the Perspective of Signal Output

Revolutionary developments in analytical chemistry have led to the rapid development of self-powered photoelectrochemical (PEC) sensors. Different from conventional PEC sensors, self-powered PEC sensors do not require an external power source or complex devices for the sensitive detection of targets. As a result, these sensors have enormous application potential for the development of novel portable sensors. An increasing body of work is making excellent progress toward the implementation of self-powered PEC sensors for detection, but there have been no reviews to date. The present review first introduces the state of the art in the development of self-powered PEC sensors. Then, different types of self-powered PEC sensors are summarized and discussed in detail, including their current, power, and potential. Additionally, single- and dual-photoelectrode systems are classified and systematically compared. Finally, the current developments and major challenges that need to be addressed are also summarized. This review provides valuable insights into the current state of self-powered PEC sensors to promote further progress in this field.

Ti3C2@UiO-TCPP Schottky junction photoelectrochemical sensor for detecting alkaline phosphatase through the steric hindrance effect of phosphopeptide

Alkaline phosphatase (ALP) is a major biomarker for clinical diagnosis, but detection methods of ALP are limited in sensitivity and selectivity. In this paper, a novel method for ALP determination is proposed. A photoelectrochemical (PEC) sensor was prepared by growing UiO-tetratopic tetrakis (4-carbox-yphenyl) porphyrin (TCPP) in situ between layered Ti3C2 through a one-pot hydrothermal method. The obtained Schottky heterojunction photoelectric material Ti3C2@UiO-TCPP not only has a large light absorption range but also greatly improves the efficiency of photogenerated electron hole separation and thereby enhances sensitivity for PEC detection. The phosphate group on the phosphorylated polypeptide was utilized to form a Zr-O-P bond with the zirconium ion on UiO-66, and then photocurrent decreases due to the steric hindrance effect of phosphorylated polypeptides, that is, the hindrance of electron transfer between the photoelectric material and a solution. The specific interaction between ALP and phosphorylated polypeptides shears the bond between phosphate and zirconium ion on UiO-66 in the peptides then weakens the hindrance effect and increases the photocurrent, thus realizing ALP detection. The linear range of ALP is 0.03-10,000 U·L-1, and the detection limit is 0.012 U·L-1. The method is highly sensitive and selective, and has been applied in detection of ALP in serum samples.

A signal polarity conversion photoelectrochemical immunosensor for neuron-specific enolase detection based on MgIn2S4-sensitized CsPbBr3

A photoelectrochemical (PEC) immunosensor was designed based on MgIn2S4-decorated inorganic halide perovskite CsPbBr3 combined with the signal polarity conversion strategy for neuron-specific enolase (NSE) detection. CsPbBr3 was applied as the basic photoactive material owing to its excellent optical and electronic properties, which provide a good PEC performance for sensor construction. In order to improve the stability of this perovskite, the three-dimensional flower-like MgIn2S4 with a desirable direct band gap was applied to enhance the PEC response. Also, the excellent structure of MgIn2S4 provides large surface-active sites for CsPbBr3 loaded. For enhancing the detection sensitivity of PEC immunosensor, p-type CuInS2 was used as a signal probe which fixed on detection antibody (Ab2). When the target NSE was present, the photogenerated electrons produced by CuInS2 were transferred to the test solution, and the polarity of PEC signal changes. Based on the above photosensitive materials and signal conversion strategy, the proposed PEC immunosensor showed favorable detection performance, and the linear detection range is 0.0001 ~ 100 ng/mL with a 38 fg/mL of detection limit. The proposed strategy improved the adhibition of CsPbBr3 in the analytical chemistry field as well as provided a reference method for other protein detections.

Signal Modulation of Organic Photoelectrochemical Transistor by a Z-Scheme Photocathodic Gate: An Innovative Dual Amplification Strategy for Sensitive Aptasensing Application

Pursuing a more efficient signal amplification strategy is highly demanded for improving the performance of the promising cathodic photoelectrochemical (PEC) sensors. In this work, we present an extremely effective dual signal amplification strategy by the integration of a Z-scheme nanohybrids-based photocathode with the effective signal modulation of an organic photoelectrochemical transistor (OPECT) device. Specifically, photocathodic gate material of CdTe-BiOBr nanohybrids with a Z-scheme electron-transfer route was designed and synthesized for preliminary improvement of the activity of the photogate; afterward, signal modulation of the OPECT system by the photocathodic gate of CdTe-BiOBr was then accomplished for further signal amplification by 2 orders of magnitude. As a result, the output PEC signal of CdTe-BiOBr was enhanced by 17.5-fold as compared to BiOBr, and the channel current (IDS) of the OPECT device was 117-fold magnified than its gate current (IG) response. Exemplified by tetracycline (TC) as a model target and aptamer as the specific recognition element, a versatile cathodic aptasensing platform was constructed based on the proposed OPECT device. The introduced OPECT aptasensor merits advantages, including a good linear range (1.0 × 10-12 to 1.0 × 10-6 M), a low limit of detection (4.2 × 10-13 M), and superior sensitivity than the traditional PEC methods for TC detection, which represents a universal protocol for developing the innovative photocathodic OPECT sensing platform toward accurate analysis.

Long-Wavelength Illumination-Induced Photocurrent Enhancement of a ZnPc Photocathodic Material for Bioanalytical Applications

Herein, a novel photocathodic nanocomposite poly{4,8-bis[5-(2-ethylhexyl)-thiophen-2-yl] benzo[1,2-b:4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)-carbonyl]thieno[3,4-b]thiophene-4,6-diyl}/phthalocyanine zinc (PTB7-Th/ZnPc) with high photoelectric conversion efficiency under long-wavelength illumination was prepared to construct an ultrasensitive biosensor for the detection of microRNA-21 (miRNA-21), accompanied by a prominent anti-interference capability toward reductive substances. Impressively, the new heterojunction PTB7-Th/ZnPc nanocomposite could not only generate a strong cathodic photocurrent to improve the detection sensitivity under long-wavelength illumination (660 nm) but also effectively avoid the high damage of biological activity caused by short-wavelength light stimulation. Accordingly, by coupling with rolling circle amplification (RCA)-triggered DNA amplification to form functional biquencher nanospheres, a PEC biosensor was fabricated to realize the ultrasensitive analysis of miRNA-21 in the concentration range of 0.1 fM to 10 nM with a detection limit as low as 32 aM. This strategy provided a novel long-wavelength illumination-induced photocurrent enhancement photoactive material for a sensitive and low-damage anti-interference bioassay and early clinical disease diagnosis.

Photocurrent Polarity Reversal Induced by Electron-Donor Release for the Highly Sensitive Photoelectrochemical Detection of Vascular Endothelial Growth Factor 165

Photocurrent polarity reversal is a switching process between the anodic and cathodic pathways and is critical for eliminating false positivity and improving detection sensitivity in photoelectrochemical (PEC) sensing. In this study, we construct a PEC sensor with excellent photocurrent polarity reversal induced by ascorbic acid (AA) as an electron donor with the energy level matching the photoactive material zirconium metal-organic framework (ZrMOF). The ZrMOF-modified electrode demonstrates cathodic photocurrent in the presence of O2 as an electron acceptor, while the anodic photocurrent is generated in the presence of AA, achieving photocurrent polarity reversal. By the in situ release of AA from AA-encapsulated apoferritin modified with DNA 2 (AA@APO-S2) as a detection tag in the presence of trypsin after the recognition of hairpin DNA-modified indium tin oxide to the reaction product of aptamer/DNA 1 with the target protein and the following rolling cycle amplification for introducing the detection tag to the sensing interface, the reversed photocurrent shows an enhanced photocurrent response to the target protein, leading to a highly sensitive PEC sensing strategy. This strategy realizes the detection of vascular endothelial growth factor 165 with good specificity, a wide linear range, and a low detection limit down to 5.3 fM. The actual sample analysis offers the detection results of the proposed PEC sensor comparable to those of commercial enzyme-linked immunosorbent assay tests, indicating the promising application of the photocurrent polarity reversal-based PEC sensing strategy in biomolecule detection and clinical diagnosis.

A smartphone-powered photoelectrochemical POCT via Z-scheme Cu2O/Cu3SnS4 for dibutyl phthalate in the environmental and food

As a major hazardous additive released from microplastics and nanoplastics, identifying dibutyl phthalate (DBP) in complex matrices attracts a growing concern in environmental monitoring and food safety. For the first time, Cu2O/Cu3SnS4 nanoflower is prepared and serves as the photoactive material which can be constructed as a smartphone-based photoelectrochemical (PEC) point-of-care test (POCT). Effectively matching energy levels between Cu2O and Cu3SnS4 accelerated the transfer of photogenerated electron-hole pairs, significantly improving the intelligent PEC POCT performance. The novel Cu2O/Cu3SnS4 has proven to be the Z-scheme heterojunction by density functional theory calculation. A competitive immunoassay has been realized on a Cu2O/Cu3SnS4 modified electrode, dramatically decreasing the photocurrent signal and enhancing POCT sensitivity. The smartphone has been used to record and transfer PEC results. Under optimal conditions, the PEC POCT exhibited a satisfying linear range (0.04-400 ng/mL) and a low detection limit of 7.94 pg/mL in real samples, together with excellent stability, repeatability, reproducibility and selectivity. The PEC POCT system provides good performance and practicability in determining DBP in water and edible oil samples. This proposal provides a practical strategy for the intelligent POCT for environment monitoring and food safety.

DNA intercalation makes possible superior-gain organic photoelectrochemical transistor detection

DNA intercalation has increasingly been studied for various scenario implementations due to the diverse functions of DNA/intercalators. Nascent organic photoelectrochemical transistor (OPECT) biosensing taking place in organic electronics and photoelectrochemical bioanalysis represents a promising technological frontier in the arena. In this work, we first devise DNA intercalation-enabled OPECT for miRNA detection with a superior gain up to 17100. Intercalation of [Ru(bpy)2dppz]2+ within the miRNA-initiated hybrid chain reaction (HCR)-derived duplex DNA is realized for producing anodic photocurrent upon light stimulation, causing the corresponding target-dependent alternation in gate voltage (VG) and hence the modulated channel current (IDS) of poly (3,4-ethylenedioxythiophene) doped with poly (styrene sulfonate) (PEDOT:PSS) under specific drain voltage (VDS) for quantitative miRNA-21 analysis, which shows a wide linear relationship and a low detection limit of 5.5 × 10-15 mol L-1. This study features the DNA intercalation-enabled organic electronics with superior gain and is envisaged to attract more attention to explore DNA adducts for innovative bioelectronics and biosensing, given the diverse DNA binders with multiple functions.

HCR/DNAzyme-triggered cascaded feedback cycle amplification for self-powered dual-photoelectrode detection of femtomolar HPV16

For high-performance dual-photoelectrode assay, developing a pair of photoactive materials with well-matched band structure and the design of a powerful sensing strategy are highly desirable. Herein, the Zn-TBAPy pyrene-based MOF and BiVO4/Ti3C2 Schottky junction were employed as photocathode and photoanode to form an efficient dual-photoelectrode system. The integration of the cascaded hybridization chain reaction (HCR)/DNAzyme-assisted feedback amplification with DNA walker-mediated cycle amplification strategy realizes femtomolar HPV16 dual-photoelectrode bioassay. Through the activation of the HCR cascaded with the DNAzyme system in the presence of HPV16, plentiful HPV16 analogs are generated that leads to exponential positive feedback signal amplification. Meanwhile on the Zn-TBAPy photocathode, the NDNA hybridizes with the bipedal DNA walker followed by circular cleavage by Nb.BbvCI NEase, producing a dramatically enhanced PEC readout. The achieved ultralow detection limit of 0.57 fM and a wide linear range of 10-6 nM-103 nM showcase the excellent performance of the developed dual-photoelectrode system.

Engineered Branching Peptide as Dual-Functional Antifouling and Recognition Probe: Toward a Dual-Photoelectrode Protein Biosensor with High Accuracy

The building of practical biosensors that have anti-interference abilities against biofouling of nonspecific proteins and biooxidation of reducing agents in actual biological matrixes remains a great challenge. Herein, a robust photoelectrochemical (PEC) biosensor capable of accurate detection in human serum was pioneered through the integration of a new engineered branching peptide (EBP) into a synergetic dual-photoelectrode system. The synergetic dual-photoelectrode system involved the tandem connection of a C3N4/TiO2 photoanode and a AuPt/PANI photocathode, while the EBP as a dual-functional antifouling and recognition probe featured an inverted Y-shaped configuration with one recognition backbone and two antifouling branches. Such an EBP enables a simple procedure for electrode modification and an enhanced antifouling nature compared to a regular linear peptide (LP), as theoretically supported by the results from molecular dynamics simulations. The as-developed PEC biosensor had a higher photocurrent response and a good antioxidation property inherited from the photoanode and photocathode, respectively. Targeting the model protein biomarker of cardiac troponin I (cTnI), this biosensor achieved good performances in terms of high sensitivity, specificity, and anti-interference.

A cathodic photoelectrochemical biosensor based on CRISPR/Cas12a trans-cleavage mediated p-n heterojunction quenching mode for microRNA determination

In this study, a cathodic photoelectrochemical (PEC) bioanalysis for sensitive determination of microRNA (miRNA) has been constructed based on CRISPR/Cas12a trans-cleavage mediated [(C6)₂Ir(dcbpy)]⁺PF₆^- (C6 represents coumarin-6 and dcbpy represents 4,4'-dicarboxyl-2,2'-bipyridine)-sensitized NiO photocathode and p-n heterojunction quenching mode. The [(C6)₂Ir(dcbpy)]⁺PF₆^--sensitized NiO photocathode exhibits a stable and dramatically improved photocurrent signal due to highly effective photosensitization of [(C6)₂Ir(dcbpy)]⁺ PF₆^-. Then Bi₂S₃ quantum dots (Bi₂S₃ QDs) is captured on the photocathode, resulting in markedly quenching of the photocurrent. When target miRNA is specifically recognized by the hairpin DNA to stimulate the trans-cleavage activity of CRISPR/Cas12a, leading to the leave of the Bi₂S₃ QDs. The photocurrent is gradually recovered with the increasing target concentration. Thus, the quantitative signal response to target is achieved. Benefiting from excellent performance of NiO photocathode, intense quenching effect of p-n heterojunction and accurate recognition ability of CRISPR/Cas12a, the cathodic PEC biosensor shows a wider linear range over 0.1 fM-10 nM, with a low detection limit of 36 aM. Also, the biosensor exhibits satisfying stability and selectivity.

Synergistic Signal Amplification-Initiated Innovative Self-Powered Photoelectrochemical Aptasensing: An Ingenious Photocathode Activated by the High-Light-Harvesting Photoanode

Exploiting ingenious photoelectrodes and innovative signal amplification strategies has the potential to achieve high sensitivity in self-powered cathodic photoelectrochemical (PEC) analysis. In this work, a novel self-powered PEC sensing platform was constructed by integrating a synergistic signal amplification of an ingenious photocathode with a high light-harvesting photoanode. In the dual photoelectrode-based PEC system, the amplified photocurrent signals were induced by a synergistic enhancement: (1) the photocurrent of the BiOBr photocathode was improved by the incorporation of nitrogen-doped graphene; (2) the photocurrent of the self-powered sensor was activated by the high-light-harvesting Bi₂S₃-C₃N₄ photoanode. Subsequently, the rational mechanism for synergistic signal amplification was investigated. For the construction of the sensing interface, an aptamer was introduced as the recognition element to specifically capture the streptomycin (STR) target. Under optimal conditions, the constructed self-powered aptasensor has the merits of good linear range (1 × 10^-11 to 5 × 10^-7 M), acceptable limit of detection (1.18 × 10^-12 M), and excellent stability and selectivity for STR detection. Additionally, the proposed self-powered aptasensor showed acceptable accuracy for the detection of STR in water. Hopefully, this might stimulate more interest in designing and constructing novel platforms for exquisite photocathodic monitoring of various contaminants in the environment.

Ultrasensitive alkaline phosphatase activity assay based on controllable signal probe production coupled with the cathodic photoelectrochemical analysis

A highly sensitive and selective split-type perovskite-based photoelectrochemical (PEC) platform was developed for measuring alkaline phosphatase (ALP) activity in milk and serum samples. ALP in the test sample hydrolyzed 2-phosphate sesquimagnesium salt hydrate (AAPS) in a 96-microwell plate to produce ascorbic acid (AA), a PEC electron donor. The resulting AA, which could preferentially annihilate the photogenerated holes, indirectly reflects ALP activity. The PEC used a cetyltrimethylammonium bromide (CTAB)-functionalized CH₃NH₃PbI₃ (CTAB@CH₃NH₃PbI₃) film as the cathode to monitor the controlled AA production. Due to the excellent photoelectric characteristics of the CH₃NH₃PbI₃ perovskite and the split-type assay, excellent sensitivity and selectivity for ALP detection were obtained. Under the optimum experimental conditions, ALP activity with a limit of detection (LOD) of 2.6 × 10^-4 U/L in a linear dynamic range of 10^-3 ∼ 10² U/L was obtained. With its sensitive, rapid, and high-throughput detection capabilities, this split-type and label-free PEC platform has great potential for use in food and biomedical analysis.

Novel design constructed In2S3@SnO2 hollow heterojunctions by insufficiently etched MOFs as framework for photoelectrochemical bioanalysis

Compared to sufficiently etched MOFs materials, insufficiently etched MOFs materials tend to display unsatisfactory performance due to their immature structure and have been eliminated from scientific research. Herein, this work reported a novel In₂S₃@SnO₂ heterojunction (In₂S₃@SnO₂-HSHT) materials, which were stably synthesized in high temperature aqueous environment and equipped extraordinary photoelectrochemical (PEC) properties, fabricated by a succinct hydrothermal synthesis method using insufficiently etched MIL-68 as a self-sacrificing template. Compared with the control groups and In₂S₃@SnO₂ heterojunctions with collapse morphology synthesized by sufficiently etched MIL-68 in high temperature aqueous environment, In₂S₃@SnO₂-HSHT synthesized from insufficiently etched MIL-68 as a template had a massively enhanced light-harvesting capability and generated more photoinduced charge carriers due to its well-preserved hollow structure. Therefore, based on outstanding PEC performance of In₂S₃@SnO₂-HSHT, the established PEC label-free signal-off immunosensor to detect CYFRA 21-1, revealing vivid selectivity, stability, and reproducibility. This novel strategy adopted the insufficient chemical etching method neglected by the mainstream chemical etching approaches, which solved the challenge that the stability of the sufficient etched MOFs with hollow structure cannot be maintained under the subsequent high temperature aqueous reaction conditions, and was further applied to the design of hollow heterojunction materials for photoelectrochemical fields.

A cathodic photoelectrochemical immunoassay with dual signal amplification for the ultrasensitive detection of DNA damage biomarkers

Toxicity screening and risk assessment of an overwhelmingly large and ever-increasing number of chemicals are vitally essential for ecological safety and human health. Genotoxicity is particularly important because of its association with mutagenicity, carcinogenicity and cancer. Phosphorylated histone H2AX (γH2AX) is an early sensitive genotoxic biomarker. It is therefore highly desirable to develop analytical methods for the detection of trace γH2AX to enable screening and assessment of genotoxicity. Here, we developed a novel cathodic photoelectrochemical (PEC) immunoassay with dual signal amplification for the rapid and ultrasensitive detection of γH2AX in cell lysates. A sandwich immuno-reaction targeting γH2AX was first carried out on a 96-well plate, using a secondary antibody/gold nanoparticle/glucose oxidase conjugate as the labeled detection antibody. The conjugate increased the production of H₂O₂ and thus provided the first mechanism of signal amplification. The immuno-reaction product containing H₂O₂ was then detected on a photocathode prepared from Bi_2+xWO₆ rich in oxygen vacancies, with H₂O₂ acting as electron acceptor. The oxygen vacancies acted as both adsorption and activation sites of H₂O₂ and thus enhanced the photocurrent, which provided another mechanism of signal amplification. As a result, an ultrasensitive immunoassay for γH2AX determination was established with a limit of detection of 6.87 pg/mL (S/N = 3) and a wide linear range from 0.01 to 500 ng/mL. The practicability of this assay was verified by detecting γH2AX in cell lysates exposed to known genotoxic chemicals. Our work offers a promising tool for the screening of genotoxic chemicals and opening a new avenue toward environmental risk assessment.

Trap remediation of CuBi2O4 nanopolyhedra via surface self-coordination by H2O2: an innovative signaling mode for cathodic photoelectrochemical bioassay

This work conveys a new philosophy of surface self-coordination mediated trap remediation for innovative cathodic photoelectrochemical (PEC) signal transduction. Initially, the surface trap states of CuBi₂O₄ nanopolyhedra resulting from dangling bonds can function as charge carrier recombination centers, which suppress the carrier separation efficiency and result in a low photocurrent output. Particularly, hydrogen peroxide (H₂O₂) spontaneously interacts with the uncoordinated Cu(II) on the surface of CuBi₂O₄, enabling efficient elimination of dangling bonds and remedy of trap states, thereby outputting intensified photocurrent readout. Exemplified by Flap endonuclease 1 (FEN1) as a model target, a tetrahedron DNA (THD)-based strand displacement amplification (SDA) was introduced to manipulate the formation of hemin impregnated G-quadruplex (G-quadruplex/hemin) DNAzyme and the resultant catalytic reduction for H₂O₂. In addition, a highly efficient and ultra-sensitive PEC sensing platform was achieved for FEN1 detection with a wide linear range from 1.0 fM to 100.0 pM and a detection limit of 0.3 fM (S/N = 3). This work not only establishes a new idea of cathodic PEC signal transduction, but also offers an efficient biosensing platform for FEN1.

High-Performance Photoelectrochemical Enzymatic Bioanalysis Based on a 3D Porous CuxO@TiO2 Film with a Solid-Liquid-Air Triphase Interface

The accurate detection of H₂O₂ is crucial in oxidase-based cathodic photoelectrochemical enzymatic bioanalysis but will be easily compromised in the conventional photoelectrode-electrolyte diphase system due to the fluctuation of oxygen levels and the similar reduction potential between oxygen and H₂O₂. Herein, a solid-liquid-air triphase bio-photocathode based on a superhydrophobic three-dimensional (3D) porous micro-nano-hierarchical structured Cu_xO@TiO₂ film that was constructed by controlling the wettability of the electrode surface is reported. The triphase photoelectrochemical system ensures an oxygen-rich interface microenvironment with constant and sufficiently high oxygen concentration. Moreover, the 3D porous micro-nano-hierarchical structures possess abundant active catalytic sites and a multidimensional electron transport pathway. The synergistic effect of the improved oxygen supply and the photoelectrode architecture greatly stabilizes and enhances the kinetics of the enzymatic reaction and H₂O₂ cathodic reaction, resulting in a 60-fold broader linear detection range and a higher accuracy compared with the conventional solid-liquid diphase system.

Dual-mode photoelectrochemical/electrochemical sensor based on Z-scheme AgBr/AgI-Ag-CNTs and aptamer structure switch for the determination of kanamycin

A "signal-on" dual-mode aptasensor based on photoelectrochemical (PEC) and electrochemical (EC) signals was established for kanamycin (Kana) assay by using a novel Z-scheme AgBr/AgI-Ag-CNTs composite as sensing platform, an aptamer structure switch, and K₃[Fe(CN)₆] as photoelectron acceptor and electrochemical signal indicator. The aptamer structure switch was designed to obtain a "signal-off" state, which included an extended Kana aptamer (APT), one immobilized probe (P1), and one blocking probe (P2) covalently linked with graphdiyne oxide (GDYO) nanosheets. P1, P2, and aptamer formed the double helix structure, which resulted in the inhibited photocurrent intensity because of the weak conductivity of double helix layer and serious electrostatic repulsion of GDYO towards K₃[Fe(CN)₆]. In the presence of Kana, APT specifically bound to the target and dissociated from P1 and P2, and thus, a "signal-on" state was initiated by releasing P2-GDYO from the platform. Based on the sensing platform and the aptamer structure switch, the dual-mode aptasensor realized the linear determination ranges of 1.0 pM-2.0 μM with a detection limit (LOD) of 0.4 pM (for PEC method) and 10 pM-5.0 μM with a LOD of 5 pM (for EC method). The aptasensor displayed good application potential for Kana test in real samples.

Light-Addressable Electrochemical Sensors toward Spatially Resolved Biosensing and Imaging Applications

The light-addressable electrochemical sensor (LAES) is a recently emerged bioanalysis technique combining electrochemistry with the photoelectric effect in a semiconductor. In an LAES, a semiconductor substrate is illuminated locally to generate charge carriers in a well-defined area, thereby confining the electrochemical process to a target site. Benefiting from the unique light addressability, an LAES can not only detect multiple analytes in parallel within a single sensor plate but also act as a bio(chemical) imaging sensor to visualize the two-dimensional distribution of specific analytes. An LAES usually has three working modes: a potentiometric mode using light-addressable potentiometric sensors (LAPS) and an impedance mode using scanning photoinduced impedance microscopy (SPIM), while an amperometric mode refers to light-addressable electrochemistry (LAE) and photoelectrochemical (PEC) sensing. In this review, we describe the detection principles of each mode of LAESs and the concept of light addressability. In addition, we highlight the recent progress and advance of LAESs in spatial resolution, sensor system design, multiplexed detection, and bio(chemical) imaging applications. An outlook on current research challenges and future prospects is also presented.

Ultrasensitive photoelectrochemical immunosensor based on Dual-Photosensitive electrodes

In the study, a photoelectrochemical (PEC) immunosensor based on dual-photosensitive electrodes was developed for cardiac troponin I (cTnI) detection. The sensing photocathode with biometric functions was prepared by CuInS₂ and narrow band gap semiconductor In₂S₃ as the counter electrode. In this way, the separation of photoanode and biometric events was realized, and the ability of stability of the immunosensor could be effectively improved. Moreover, the attraction to the photogenerated electrons (e^-) from photoanode would be increased by the abundant holes (h⁺) of photocathode, under the radiation of light. This tremendously improves the photoelectric response, which further improves the sensitivity of the immunosensor. The controllable-synthesis uncomplicated photoelectric material not only accords with the principle of simplicity of electrode modification but also makes the immunosensor more conducive to the practical application. Additionally, even in the case of zero bias voltage, the constructed PEC immunosensor can operate with high efficiency, namely, self-powered. The immunosensor could provide the quantitative readout photocurrent to a concentration of cTnI in the range of 0.10 pg/mL to 1.00 μg/mL and the detection limit was 0.0113 pg/mL under the optimal experimental conditions. With favorable performance in terms of anti-interference, stability, specificity and reproducibility, this immunosensor will provide new prospects for general PEC bioanalysis development.

A near-infrared light-driven photoelectrochemical aptasensing platform for adenosine triphosphate detection based on Yb-doped Bi2S3 nanorods

Due to its capability of low spectral interference, high light stability, and minimal photodamage to biological species, near-infrared (NIR) light is advantageous in biosensing and biochemical analysis. This work developed a photoelectrochemical (PEC) aptasensor for adenosine triphosphate (ATP) detection using NIR light as the irradiation source. In order to utilize NIR light, we prepared Yb-doped Bi₂S₃ (Yb-Bi₂S₃) nanorods to act as photoelectric transducing materials. Due to the unfilled 4f orbitals of Yb which introduced the impurity level between the valence band and conduction band of Bi₂S₃, Yb-Bi₂S₃ exhibited admirable photo-to-current conversion efficiency under NIR light irradiation. The Yb-Bi₂S₃ modified electrode was employed to construct a NIR light-driven PEC sensor using an ATP-binding aptamer as the recognition element. When ATP was present, the photocurrent signal of the proposed aptasensor declined, owing to the formation of an ATP-aptamer complex which enhanced the steric hindrance of electron transfer on the electrode. Under optimal conditions, the sensor showed a sensitive response to ATP in the concentration range from 0.5 to 300 nmol L^-1 with a detection limit of 0.1 nmol L^-1. The proposed aptasensor exhibited high selectivity, good repeatability and desirable stability. Moreover, it was successfully applied to ATP detection in human serum samples.

Iron Single-Atom Catalysts Boost Photoelectrochemical Detection by Integrating Interfacial Oxygen Reduction and Enzyme-Mimicking Activity

The investigations on the generation, separation, and interfacial-redox-reaction processes of the photoinduced carriers are of paramount importance for realizing efficient photoelectrochemical (PEC) detection. However, the sluggish interfacial reactions of the photogenerated carriers, combined with the need for appropriate photoactive layers for sensing, remain challenges for the construction of advanced PEC platforms. Here, as a proof of concept, well-defined Fe single-atom catalysts (Fe SACs) were integrated on the surface of semiconductors, which amplified the PEC signals via boosting oxygen reduction reaction. Besides, Fe SACs were evidenced with efficient peroxidase-like activity, which depresses the PEC signals through the Fe SACs-mediated enzymatic precipitation reaction. Harnessing the oxygen reduction property and peroxidase-like activity of Fe SACs, a robust PEC sensing platform was successfully constructed for the sensitive detection of acetylcholinesterase activity and organophosphorus pesticides, providing guidelines for the employment of SACs for sensitive PEC analysis.

A visible light inducing photoelectrochemical biosensor with high-performance based on a porphyrin-sensitized carbon nitride composite

An outstanding photosensitive material plays a crucial role in building a high-performance and practical photoelectrochemical (PEC) biosensor.

Invoking Cathodic Photoelectrochemistry through a Spontaneously Coordinated Electron Transporter: A Proof of Concept Toward Signal Transduction for Bioanalysis

Most of the cathodic photoelectrochemical (PEC) bioassays rely on electron accepting molecules for signal stimuli; unfortunately, the performances of which are still undesirable. New signal transduction strategies are still highly expected for the further development of cathodic photoelectrochemistry as a potentially competitive method. This work represents a new concept of invoked cathodic photoelectrochemistry by a spontaneously formed electron transporter for innovative operation of the sensing strategy. Specifically, the hexacyanoferrate(II) in solution easily self-coordinated with CuO nanomaterials and formed electron transporting copper hexacyanoferrate (CuHCF) on the surface, which endowed improved carrier separation for presenting augmented photocurrent readout. Exemplified by the T4 polynucleotide kinase (T4 PNK) and its inhibitors as targets, a homogenous cathodic PEC biosensing platform was achieved with the distinctive merits of label-free, immobilization-free, and split-mode readout. The mechanism revealed here provided a totally different perspective for signal transduction in cathodic photoelectrochemistry. Hopefully, it may stimulate more interests in the design and construction of semiconductor/transporter counterparts for exquisite operation of photocathodic bioanalysis.

2D MOF-Based Photoelectrochemical Aptasensor for SARS-CoV-2 Spike Glycoprotein Detection

A reliable and sensitive detection approach for SARS-CoV 2 is essential for timely infection diagnosis and transmission prevention. Here, a two-dimensional (2D) metal-organic framework (MOF)-based photoelectrochemical (PEC) aptasensor with high sensitivity and stability for SARS-CoV 2 spike glycoprotein (S protein) detection was developed. The PEC aptasensor was constructed by a plasmon-enhanced photoactive material (namely, Au NPs/Yb-TCPP) with a specific DNA aptamer against S protein. The Au NPs/Yb-TCPP fabricated by in situ growth of Au NPs on the surface of 2D Yb-TCPP nanosheets showed a high electron-hole (e-h) separation efficiency due to the enhancement effect of plasmon, resulting in excellent photoelectric performance. The modified DNA aptamer on the surface of Au NPs/Yb-TCPP can bind with S protein with high selectivity, thus decreasing the photocurrent of the system due to the high steric hindrance and low conductivity of the S protein. The established PEC aptasensor demonstrated a highly sensitive detection for S protein with a linear response range of 0.5-8 μg/mL with a detection limit of 72 ng/mL. This work presented a promising way for the detection of SARS-CoV 2, which may conduce to the impetus of clinic diagnostics.

An Integrated Photoelectrochemical Nanotool for Intracellular Drug Delivery and Evaluation of Treatment Effect

With reduced background and high sensitivity, photoelectrochemistry (PEC) may be applied as an intracellular nanotool and open a new technological direction of single-cell study. Nevertheless, the present palette of single-cell tools lacks such a PEC-oriented solution. Here a dual-functional photocathodic single-cell nanotool capable of direct electroosmotic intracellular drug delivery and evaluation of oxidative stress is devised by engineering a target-specific organic molecule/NiO/Ni film at the tip of a nanopipette. Specifically, the organic molecule probe serves simultaneously as the biorecognition element and sensitizer to synergize with p-type NiO. Upon intracellular delivery at picoliter level, the oxidative stress effect will cause structural change of the organic probe, switching its optical absorption and altering the cathodic response. This work has revealed the potential of PEC single-cell nanotool and extended the boundary of current single-cell electroanalysis.

Cathode-Anode Spatial Division Photoelectrochemical Platform Based on a One-Step DNA Walker for Monitoring of miRNA-21

Photoelectrochemical (PEC) biosensors carried out the whole reaction process in the same solution, which would limit the sensitivity and selectivity of detection in the sensing system. Herein, we reported a promising new cathode-anode spatial division PEC platform based on the two-electrode synergistic enhancement strategy. With the photoanode and photocathode integrated in the same current circuit, the platform exhibited an increased photocurrent response, as well as an improved anti-interference ability led by separating the two electrodes spatially. In this proposal, red light-driven AgInS₂ nanoparticles (NPs) served as the photoanode to build biometric steps and amplify the signal, whereas p-type PbS quantum dots were selected as the photocathode to increase the signal. With the participation of alkaline phosphatase (ALP) labeled on Au NPs-DNA, ascorbic acid 2-phosphate was catalyzed to produce ascorbic acid as an electron donor, resulting in the enhancement of the PEC signal. Interestingly, in the presence of miRNA-21 and T7 Exo, the one-step DNA walker amplification can be triggered to reduce the PEC signal by releasing ALP-Au NP-DNA. The constructed PEC biosensor exhibited a detection limit of as low as 3.4 fM for miRNA-21, which was expected to be applied to early clinical diagnosis. Also, we believe that the proposed cathode-anode spatial division PEC platform can open up a new view for the establishment of other types of PEC biosensors.

Enzymatic photoelectrochemical bioassay based on hierarchical CdS/NiO heterojunction for glucose determination

The design and development of a 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis is introduced. Specifically, NiO nanoflakes (NFs) were in situ formed on carbon fibers via a facile liquid-phase deposition method followed by an annealing step and subsequent integration with CdS quantum dots (QDs). The glucose oxidase (GOx) was then coated on the photocathode to allow the determination of glucose. Under 5 W 410 nm LED light and at a working voltage of 0.0 V (vs. Ag/AgCl), this method can assay glucose concentrations down to 1.77×10^-9 M. The linear range was 5×10^-7 M to 1×10^-3 M, and the relative standard deviation (RSD) was below 5%. The photocathodic biosensor achieved target detection with high sensitivity and selectivity. This work is expected to stimulate more passion in the development of innovative hierarchical heterostructures for advanced self-powered photocathodic bioanalysis. Design of 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis.

A dual-signal self-checking photoelectrochemical immunosensor based on the sole composite of MIL-101(Cr) and CdSe quantum dots for the detection of α-fetoprotein

Designing a photoelectrochemical (PEC) immunosensor that can produce dual photocurrent signals which can refer to each other is a great importance but a big challenge. In this manuscript, a novel dual photocurrent signals immunosensor was constructed for the detection of α-fetoprotein (AFP). Unlike the usual method of using two composite materials to provide cathode and anode photocurrent respectively, this work applies only one compound of MIL-101 (Cr) and CdSe quantum dots (QDs). Thereinto, we found that the photocurrent polarity of MIL-101(Cr) would switch by adjusting applied voltage. And then CdSe QDs was introduced by simple ultrasound mixing to boost the dual photocurrent signals. Furthermore, in the composite of M&C, the electron transfer path between MIL-101(Cr) and CdSe QDs may switch between "Z-type" and "Ⅱ-type" by adjusting voltage. Benefiting by the dual signals, the proposed sensor can not only perform sensitively quantitative detection of α-fetoprotein (AFP), but also can intuitively estimate the accuracy and reliability of the test result by determining whether the corresponding relationship of "cathode photocurrent-analyte concentration-anode photocurrent" is established. The linear ranges of the sensing electrodes as cathode and anode are the same, both from 0.1 to 300 ng mL^-1. The limit of detection (LOD) is 0.082 ng mL^-1 (S/N = 3) when it used as an anode, and the LOD is 0.054 ng mL^-1 (S/N = 3) when it served as cathode. Furthermore, this sensor showed acceptable stability, reproducibility, specificity, and feasibility of detecting AFP in human serum, which has broad development prospects in the early clinical diagnosis.

Self-Powered Cathodic Photoelectrochemical Aptasensor Comprising a Photocathode and a Photoanode in Microfluidic Analysis Systems

An intriguing self-powered cathodic photoelectrochemical (PEC) microfluidic aptasensor with enhanced cathodic photocurrent response is proposed for sensitive detection of prostate-specific antigen (PSA). The self-powered system is constructed by a cadmium sulfide-sensitized zinc oxide nanorod array (CdS/ZnO NA) as a photoanode with an iodide-doped bismuth oxychloride flower-array (I_0.2:BiOCI_0.8) as a photocathode, which can generate the electrical output under visible light irradiation with no external power supply. In addition, the p-type semiconductor I_0.2:BiOCI_0.8 with a special internal electric field between the iodide ion layer and the [Bi₂O₂]²⁺ layer could increase the cathodic photocurrent response by facilitating the separation of electron/hole pairs under visible light excitation. It is worth noting that dissolved oxygen as an electron acceptor can be reduced by the photogenerated electron to form a superoxide radical (^•O₂^-) in the self-powered cathodic PEC system. The further enhanced cathodic photocurrent response can be achieved by eliminating ^•O₂^- that reacts with the luminol anion radical (L^•-) to produce chemiluminescence emission, which serves as an inner excitation light source. What is more exciting is that the integration of the photoanode and the photocathode into a microfluidic chip could realize automatic sample injection and detection. On this basis, the proposed aptasensor presents excellent reproducibility and high sensitivity for detecting PSA and exhibits a good linearity range (50 fg·mL^-1 to 50 ng·mL^-1) with a low detection limit (25.8 fg·mL^-1), which opens up a new horizon of potential for sensitively detecting other kinds of disease markers.

Chemical-chemical redox cycling amplification strategy in a self-powered photoelectrochemical system: a proof of concept for signal amplified photocathodic immunoassay

A chemical-chemical redox cycling amplification strategy was introduced into a photocathodic immunosensing system. To prove the applicability of the method, a novel self-powered photochemical system by integrating the photoanode and photocathode was designed for protein analysis.

Integrating Near-Infrared Visual Fluorescence with a Photoelectrochemical Sensing System for Dual Readout Detection of Biomolecules

Compared with traditional visible light-driven fluorescence visualization (FV), near-infrared (NIR)-induced FV is an interesting and promising method, while photoelectrochemical (PEC) immunoassay sensing possesses the advantages of high sensitivity, low cost, and simple instrumentation. We combined PEC sensing with NIR-induced FV together and developed a dual readout sensing platform. In this protocol, based on the antibody-analyte (i.e., antigen, DNA, and RNA) reaction and the sandwich-type structure, CuInS₂ microflowers as the matrix provided the original background photocurrent; chlorin e6 (Ce6) was conjugated to antibody-modified upconversion nanoparticles and formed a signal label for the PEC sensing and naked-eye readout. Different from traditional PEC immunosensors, under NIR illumination, the developed dual mode sensing platform could achieve quick qualitative analysis and quantitative analysis. Preliminary application performance of the proposed biosensor in prostate-specific antigen analysis is acceptable, indicating its promising potential in clinical/biological studies.

3D NiO nanoflakes/carbon fiber meshwork: Facile preparation and utilization as general platform for photocathodic bioanalysis

Herein, we describe a customized approach for facile preparation of three-dimensional (3D) NiO nanoflakes (NFs)/carbon fiber meshwork (CFM) and its validation as a common photocathode matrix for photoelectrochemical (PEC) bioanalysis, which to our knowledge has not been reported. Specifically, 3D NiO NFs/CFM was fabricated by a sequential liquid phase deposition and annealing process, which was then characterized by scanning electron microscopy, X-ray photoelectron spectrum, UV-vis absorption spectra and N₂ adsorption-desorption measurement. Sensitized by BiOI and incorporated with an alkaline phosphatase (ALP)/tyrosinase (TYR) bi-enzyme cascade system, a sensitive split-type cathodic PEC bioanalysis for the determination of ALP was achieved. This method can detect ALP concentrations down to 3 × 10^-5 U L^-1 with a linear response range of 0.001-10 U L^-1. Moreover, this proposed system exhibited good selectivity, stability and excellent performance for real sample analysis. This research features the facile preparation of 3D NiO NFs/CFM that could acts as a universal matrix for photocathodic analysis, and is envisioned to stimulate more effort for advanced 3D photocathode for PEC bioanalysis and beyond.

Peptide-Based Photocathodic Biosensors: Integrating a Recognition Peptide with an Antifouling Peptide

Accurate and sensitive detection of targets in practical biological matrixes such as blood, plasma, serum, or tissue fluid is a frontier issue for most biosensors since the coexistence of both potential reducing agents and protein molecules has the possibility of causing signal interference. Herein, aiming at detection in a complex environment, an advanced and robust peptide-based photocathodic biosensor, which integrated a recognition peptide with an antifouling peptide in one probe electrode, was first proposed. Selecting human chorionic gonadotropin (hCG) as a model target, the recognition peptide with the sequence PPLRINRHILTR was first anchored on the CuBi₂O₄/Au (CBO/Au) photocathode and then the antifouling peptide with the sequence EKEKEKEPPPPC was further anchored to generate an antifouling biointerface. The peptide-based photocathodic biosensor demonstrated excellent anti-interference to both nonspecific proteins and reducing agents because of the capability of the antifouling peptide. It also exhibited good sensitivity owing to the utilization of the recognition peptide rather than an antibody probe. This peptide-integrated method offers a new perspective for practical applications of photocathodic biosensors.