Ultrasound-assisted extraction of organic contaminants

Ultrasonic reactor set-ups and applications: A review

Sonochemistry contributes to green science as it uses less hazardous solvents and methods to carry out a reaction. In this review, different reactor designs are discussed in detail providing the necessary knowledge for implementing various processes. The main characteristics of ultrasonic batch systems are their low cost and enhanced mixing; however, they still have immense drawbacks such as their scalability. Continuous flow reactors offer enhanced production yields as the limited cognition which governs the design of these sonoreactors, renders them unusable in industry. In addition, microstructured sonoreactors show improved heat and mass transfer phenomena due to their small size but suffer though from clogging. The optimisation of various conditions of regulations, such as temperature, frequency of ultrasound, intensity of irradiation, sonication time, pressure amplitude and reactor design, it is also discussed to maximise the production rates and yields of reactions taking place in sonoreactors. The optimisation of operating parameters and the selection of the reactor system must be considered to each application's requirements. A plethora of different applications that ultrasound waves can be implemented are in the biochemical and petrochemical engineering, the chemical synthesis of materials, the crystallisation of organic and inorganic substances, the wastewater treatment, the extraction processes and in medicine. Sonochemistry must overcome challenges that consider the scalability of processes and its embodiment into commercial applications, through extensive studies for understanding the designs and the development of computational tools to implement timesaving and efficient theoretical studies.

Optimization and validation of multiresidual extraction methods for pharmaceuticals in Soil, Lettuce, and Earthworms

The presence of human and veterinary pharmaceuticals (PhACs) in the environment poses potential risks. To comprehensively assess these risks, robust multiresidual analytical methods are essential for determining a broad spectrum of PhAC classes in various environmental compartments (soil, plants, and soil organisms). This study optimized extraction methods for analyzing over 40 PhACs from various matrices, including soil, lettuce, and earthworms. A four-step ultrasonic extraction method with varying extraction conditions and subsequent solid phase extraction was developed for soil samples. QuEChERS methods were optimized for extracting PhACs from lettuce and earthworm samples, addressing a literature gap in these less-studied matrices. The quantification of PhACs in soil, lettuce, and earthworm extracts was performed using a single LC-MS/MS method. Following thorough method validation, earthworms and lettuce were exposed to a mixture of 27 pharmaceuticals in a soil environment. The method validation results demonstrated the robustness of these methods for a broad spectrum of PhACs. Specifically, 29 out of 42 PhACs were extracted with an average efficiency > 50% and RSD < 30% from the soil; 40 out of 42 PhACs exhibited average efficiency > 50% and %RSD < 30% from the earthworms, while 39 out of 42 PhACs showed average efficiency > 50% and RSD < 30% from the lettuce. Exposure experiments confirmed the viability of these methods for quantifying a diverse range of PhACs in different environmental compartments. This study presents three thoroughly validated methods for determining more than 40 PhACs in diverse matrices, enabling a comprehensive assessment of PhAC dissemination in the environment.

Antidiabetic Property Optimization from Green Leafy Vegetables Using Ultrasound-Assisted Extraction to Improve Cracker Production

Here we test a method of incorporating of plant extracts into popular snack foods to help control diabetes. Since some fresh vegetables contain antidiabetic compounds, ultrasound-assisted extraction was used to optimize their extraction of from spring onions, bunching onions, and celery for later incorporation into crackers. We compared various concentrations of ethanol used during extraction, after which they were exposed to an ultrasound processor whose amplitude and sonication time were also varied. The optimal extraction conditions were found to be an ethanol concentration of 44.08%, an amplitude of 80%, and a sonication time of 30 min. This resulted in the highest level of α-glucosidase inhibitory activity (i.e., 1,449.73 mmol ACE/g) and the highest extraction yield (i.e., 24.16%). The extract produced from these optimum conditions was then used as a constituent component of crackers at 0.625%, 1.25%, or 2.5% w/w. These biscuits were then produced at baking temperatures of 140°C, 150°C, or 160°C. We then measured the physical characteristics and bioactivities of sample biscuits from each treatment. We found that biscuits containing 2.5% vegetable combination extract and baked at 140°C had the highest total phenolic content, the strongest antioxidant performance, and showed the most substantial antidiabetic and antiobesity effects. Here we establish conditions for the effective extraction of antidiabetic functional ingredients via ultrasound from green leafy vegetables. We also provide a method of using these ingredients to prepare crackers with the aim of developing a functional antidiabetic snack food.

A Review: Subcritical Water Extraction of Organic Pollutants from Environmental Matrices

Most organic pollutants are serious environmental concerns globally due to their resistance to biological, chemical, and photolytic degradation. The vast array of uses of organic compounds in daily life causes a massive annual release of these substances into the air, water, and soil. Typical examples of these substances include pesticides, polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs). Since they are persistent and hazardous in the environment, as well as bio-accumulative, sensitive and efficient extraction and detection techniques are required to estimate the level of pollution and assess the ecological consequences. A wide variety of extraction methods, including pressurized liquid extraction, microwave-assisted extraction, supercritical fluid extraction, and subcritical water extraction, have been recently used for the extraction of organic pollutants from the environment. However, subcritical water has proven to be the most effective approach for the extraction of a wide range of organic pollutants from the environment. In this review article, we provide a brief overview of the subcritical water extraction technique and its application to the extraction of PAHs, PCBs, pesticides, pharmaceuticals, and others form environmental matrices. Furthermore, we briefly discuss the influence of key extraction parameters, such as extraction time, pressure, and temperature, on extraction efficiency and recovery.

Design and Optimisation of Sustainable Sample Treatments Based on Ultrasound-Assisted Extraction and Strong Cation-Exchange Purification with Functionalised SBA-15 for Opium Alkaloids in Ground Poppy Seeds

An analysis methodology was optimised and validated for the quantification of opium alkaloids (OAs) in ground poppy seeds. This involved ultrasound-assisted extraction (UAE) and solid-phase extraction (SPE) purification before analysis using a high-performance liquid chromatography mass spectrometry detector (HPLC-MS/MS). UAE was optimised through the design of experiments with three factors and a three-level full factorial design. For SPE optimisation, a commercial material was compared with a previously synthesised material of SBA-15 silica functionalised with sulfonic groups (SBA-15-SO3-). The synthesised material demonstrated superior efficiency with only 25 mg and proved to be reusable for up to four cycles. The methodology was properly validated in terms of linearity, limits of detection and quantification, and selectivity. Matrix effects were negligible; adequate recovery values (85-100%) and inter-day and intra-day precision (≤15%) were obtained. The greenness of the method was evaluated with the AGREEprep metric scale, being more environmentally friendly compared to OA analysis methods. Finally, the method was applied to different samples of ground poppy seeds and revealed a concentration of 140 mg/kg of morphine equivalents in one of the samples, surpassing the legislatively established limits by sevenfold. This highlights the need to analyse these types of samples to mitigate potential public health issues.

Recent advancement in ultrasound-assisted novel technologies for the extraction of bioactive compounds from herbal plants: a review

Herbal plants comprise potent bioactives, and they have a potential for the development of functional foods. Ultrasonication technology can be used to enhance the efficiency and quality of these bioactivities. The present review discussed the ultrasound-assisted novel extraction technologies (supercritical carbon dioxide (CO2) and high pressurized liquid), including mechanistic understanding, influencing factors, extract process efficiency, and the recovery of bioactives with an industrial perspective. The strong observations of this study are the novel ultrasound-induced extraction process variables, such as ultrasound amplitude, sonication time, temperature, solid-solvent ratio, and pressure, are significantly influenced and must be optimized for maximum recovery of bioactives. The novel green technologies (ultrasound and assisted) could remarkably improve the extraction efficiency and enhance the quality of green extract. This review will support technological understanding about the impact on process parameters for the extraction of bioactives for the development of functional foods and nutraceuticals.

Ionic liquids revolutionizing biomedicine: recent advances and emerging opportunities

Ionic liquids (ILs), due to their inherent structural tunability, outstanding miscibility behavior, and excellent electrochemical properties, have attracted significant research attention in the biomedical field. As the application of ILs in biomedicine is a rapidly emerging field, there is still a need for systematic analyses and summaries to further advance their development. This review presents a comprehensive survey on the utilization of ILs in the biomedical field. It specifically emphasizes the diverse structures and properties of ILs with their relevance in various biomedical applications. Subsequently, we summarize the mechanisms of ILs as potential drug candidates, exploring their effects on various organisms ranging from cell membranes to organelles, proteins, and nucleic acids. Furthermore, the application of ILs as extractants and catalysts in pharmaceutical engineering is introduced. In addition, we thoroughly review and analyze the applications of ILs in disease diagnosis and delivery systems. By offering an extensive analysis of recent research, our objective is to inspire new ideas and pathways for the design of innovative biomedical technologies based on ILs.

Ultrasound-Assisted Anthocyanins Extraction from Pigmented Corn: Optimization Using Response Surface Methodology

This study aimed to determine the optimal UAE conditions for extracting anthocyanins from pigmented corn using the Box-Behnken design (BBD). Six anthocyanins were identified in the samples and were used as response variables to evaluate the effects of the following working variables: extraction solvent pH (2-7), temperature (10-70 °C), solvent composition (0-50% methanol in water), and ultrasound power (20-80%). The extraction time (5-25 min) was evaluated for complete recovery. Response surface methodology suggested optimal conditions, specifically 36% methanol in water with pH 7 at 70 °C using 73% ultrasound power for 10 min. The method was validated with a high level of accuracy (>90% of recovery) and high precision (CV < 5% for both repeatability and intermediate precision). Finally, the proposed analytical extraction method was successfully applied to determine anthocyanins that covered a wide concentration range (36.47-551.92 mg kg-1) in several pigmented corn samples revealing potential varieties providing more health benefits.

Determination of Flavonoid Compounds in Shanxi Aged Vinegars Based on Hydrophobic Deep Eutectic Solvent VALLME-HPLC Method: Assessment of the Environmental Impact of the Developed Method

This research presents a novel, eco-friendly, vortex-assisted liquid-liquid microextraction (VALLME) approach, integrating hydrophobic deep eutectic solvents (DESs) with HPLC for the identification and quantification of nine specific flavonoids in Shanxi aged vinegar (SAV). The parameters of DES-VALLME, including the ratio of trioctylmethylammonium chloride to 1,4-butanediol (1:6), DES volume (150 μL), vortex duration (5 min), the concentration of NaCl (0.40 g), and centrifugation time (10 min), were optimized to achieve the maximum extraction efficiency of target substances. Under these optimal conditions, quantitative analyses performed via HPLC demonstrated a broad linear range of 0.20-50.00 μg/mL and correlation coefficients (r²) greater than 0.9944 for all nine calibration curves. The limits of detection (LOD) and limits of quantitation (LOQ) were 0.09-0.18 μg/mL and 0.30-0.60 μg/mL, respectively, ensuring high sensitivity. The relative standard deviations for intra-day and inter-day variability were within the acceptable range, 2.34-3.77% and 3.04-4.96%, respectively, demonstrating the method's reliability. The recovery rates ranged from 85.97% to 108.11%, underscoring the method's precision. This technique exhibited a significant enrichment effect (enrichment factor: 43 to 296) on SAV flavonoids. Notably, the eco-friendliness of this procedure was evaluated using the Analytical Eco-Scale, Green Analytical Procedure Index, and Analytical Greenness Metric. The results suggested that this technique is a viable green alternative to traditional flavonoid determination methods in SAV. In summary, this novel method provides a theoretical basis for assessing flavonoid content in SAV samples and tracing SAV products. This contribution has significant implications for enhancing analytical techniques in food chemistry and environmental science and the sustainable development of the food industry.

Cavitation-Effect-Based Treatments and Extractions for Superior Fruit and Milk Valorisation

Ultrasound generates cavities in liquids with high-energy behaviour due to large pressure variations, leading to (bio)chemical effects and material modification. Numerous cavity-based treatments in food processes have been reported, but the transition from research to industrial applications is hampered by specific engineering factors, such as the combination of several ultrasound sources, more powerful wave generators or tank geometry. The challenges and development of cavity-based treatments developed for the food industry are reviewed with examples limited to two representative raw materials (fruit and milk) with significantly different properties. Both active compound extraction and food processing techniques based on ultrasound are taken into consideration.

Innovative approaches in cloud-point extraction

Cloud-point extraction (CPE) is a pre-treatment technique for the extraction and preconcentration of different chemical compounds, such as metal ions, pesticides, drugs, phenols, vitamins etc., from various samples. CPE is based on the phenomenon of two phases (micellar and aqueous) forming after the heating of an aqueous isotropic solution of a non-ionic or zwitterionic surfactant above the cloud-point temperature. If analytes are added to the surfactant solution under suitable conditions, they should be extracted into the micellar phase, also called the surfactant-rich phase. Recently, the traditional CPE procedure is being increasingly replaced by improved CPE procedures. In this study, recent advances in CPE over the last three years (2020 - 2022), including the application of various innovative approaches, are reviewed. In addition to the basic principle of CPE, alternative extraction media in CPE, CPE supported by various auxiliary energies, a different modified CPE procedure and the use nanomaterials and solid-phase extraction in combination with CPE are presented and discussed. Finally, some future trends for improved CPE are presented.

Implications of biosensors and nanobiosensors for the eco-friendly detection of public health and agro-based insecticides: A comprehensive review

Biosensors, in particular nanobiosensors, have brought a paradigm shift in the detection approaches involved in healthcare, agricultural, and industrial sectors. In accordance with the global expansion in the world population, there has been an increase in the application of specific insecticides for maintaining public health and enhancing agriculture, such as organophosphates, organochlorines, pyrethroids, and carbamates. This has led to the contamination of ground water, besides increasing the chances of biomagnification as most of these insecticides are non-biodegradable. Hence, conventional and more advanced approaches are being devised for the routine monitoring of such insecticides in the environment. This review walks through the implications of biosensors and nanobiosensors, which could offer a wide range of benefits for the detection of the insecticides, quantifying their toxicity status, and versatility in application. Unique eco-friendly nanobiosensors such as microcantilevers, carbon nanotubes, 3D printing organic materials and nylon nano-compounds are some advanced tools that are being employed for the detection of specific insecticides under different conditions. Furthermore, in order to implement a smart agriculture system, nanobiosensors could be integrated into mobile apps and GPS systems for controlling farming in remote areas, which would greatly assist the farmer remotely for crop improvement and maintenance. This review discusses about such tools along with more advanced and eco-friendly approaches that are on the verge of development and could offer a promising alternative for analyte detection in different domains.

Antimicrobial Activity of Sempervivum tectorum L. Extract on Pathogenic Bacteria Isolated from Otitis Externa of Dogs

The present study investigated the antimicrobial activity, total phenolic content, and proanthocyanidin concentration of ethanolic extracts from fresh leaves of Sempervivum tectorum L. The extracts were phytochemically analyzed and evaluated for antimicrobial activity. The broth microdilution method was used to assess antimicrobial activity against pathogenic bacteria isolated from ear swabs taken from dogs with otitis externa. Many compounds were present in the ethanolic aqueous extracts, which exhibited a broad spectrum of antimicrobial activity. They showed strong antibacterial activity against standard clinical Gram-positive strains such as S. aureus and Gram-negative strains such as P. aeruginosa. In our study, the obtained quantity of total phenolic compounds in the ethanol:water extract of leaves was 126.17 mg GAE/g. The proanthocyanidin concentration in the tested Sempervivum tectorum L. extracts was 15.39 mg PAC/g material. The high contents of total phenolics and proanthocyanidin indicated that these compounds contribute to antimicrobial activity. The antimicrobial activity of the tested S. tectorum L. extracts ranged from 1.47 to 63.75 µg/mL, starting with 1.47 µg/mL and 1.75 µg/mL against S. aureus ATCC 25923 and P. aeruginosa ATCC 27853 strains, respectively. Likewise, S. tectorum L. ethanol extract demonstrated a bacteriostatic effect against S. aureus clinical isolate with a median MIC of 23.25 µg/mL and MBC of 37.23 µg/mL; and bactericidal against S. aureus ATCC 25923 with the median MIC of 20.33 µg/mL and MBC of 37.29 µg/mL. In the Gram-negative P. aeruginosa clinical and standard strains, the expressed MIC and MBC values were 24.234 and 20.53 µg/mL for MIC, and 37.30 and 37.02 µg/mL for MBC, respectively.

Cannabis Extraction Technologies: Impact of Research and Value Addition in Latin America

The Cannabis genus of plants has been widely used in different cultures for various purposes. It is separated into three main species: sativa, indica, and ruderalis. In ancient practices, the plant was used as a multipurpose crop and valued for its fiber, food, and medicinal uses. Since methodologies for the extraction, processing, and identification of components have become available, medical, and food applications have been increasing, allowing potential development in the pharmaceutical and healthy functional food industries. Although the growing legalization and adoption of cannabis for the treatment of diseases are key factors pushing the growth of its market, the biggest challenge is to obtain higher-quality products in a time- and cost-effective fashion, making the process of extraction and separation an essential step. Latin American countries exhibit great knowledge of extraction technologies; nevertheless, it is still necessary to verify whether production costs are economically profitable. In addition, there has been an increase in commercial cannabis products that may or may not be allowed, with or without quality fact sheets, which can pose health risks. Hence, legalization is mandatory and urgent for the rest of Latin American countries. In this article, the phytochemical compounds (cannabinoids, terpenes, and phenolic compounds), the current status of legalization, extraction techniques, and research advances in cannabis in Latin America are reviewed.

Multiclass ultrasound-assisted extraction, clean-up and high performance liquid chromatography-tandem mass spectrometry quantification of steroid hormone residues in compost

An analytical method for multiclass determination of steroid hormones in compost has been developed to fill the lack of methods for steroid residuals monitoring in this waste-derived product, increasingly produced and recycled in the circular-economy approach. The procedure simply entails an ultrasound-assisted extraction (UAE) on 300 mg compost by 3 × 2.5 mL methanol × 5 min sonication steps followed by a quick clean-up by solid-phase extraction (SPE) on the silica-based Supelclean™ LC-NH₂ that avoids use of organic solvents. The clean extract is analysed by HPLC-MS/MS achieving firm identification and quantitation of the 16 steroids, i.e., glucocorticoids, progestins, androgens, oestrogens. The analytical figures of merits were assessed, viz. selectivity, sensitivity, linearity, matrix effect, trueness, precision, carry-over and robustness, in line with updated guidelines. Recovery was investigated in the concentration range 15-800 ng g^-1, and at the quality control levels (15, 50, 200 and 400 ng g^-1) was in the range 60-120%, with inter-day precision RSDs < 20% (n = 3). The experimental quantification limit was 15 ng g^-1 for all the hormones. The method was applied to analysis of different compost samples proving to be functional to environmental monitoring.

Review of extraction and detection techniques for the analysis of pesticide residues in fruits to evaluate food safety and make legislative decisions: Challenges and anticipations

Fruits are vital parts of the human diet because they include necessary nutrients that the body needs. Pesticide use has increased dramatically in recent years to combat fruit pests across the world. Pesticide usage during production, on the other hand, frequently results in undesirable residues in fruits after harvest. Consumers are concerned about pesticide residues since most of the fruits are directly consumed and even recommended for the patients as dietary supplements. As a result of this worry, pesticide residues in fruits are being randomly monitored to re-assess the food safety situation and make informed legislative decisions. To assess the degree of pesticide residues in fruits, a simple and quick analytical procedure is usually required. As a result, pesticide residue detection (using various analytical techniques: GC, LC and Biosensors) becomes critical, and regulatory directives are formed to regulate their amounts via the Maximum Residue Limit (MRL). Over the previous two decades, a variety of extraction techniques and analytical methodologies for xenobiotic's efficient extraction, identification, confirmation and quantification have been developed, ranging from traditional to advanced. The goal of this review is to give readers an overview of the evolution of numerous extraction and detection methods for pesticide residue analysis in fruits. The objective is to assist analysts in better understanding how the ever-changing regulatory landscape might drive the need for new analytical methodologies to be developed in order to comply with current standards and safeguard consumers.

Microwave- and Ultrasound-Assisted Extraction of Cannabinoids and Terpenes from Cannabis Using Response Surface Methodology

Limited studies have explored different extraction techniques that improve cannabis extraction with scale-up potential. Ultrasound-assisted and microwave-assisted extraction were evaluated to maximize the yield and concentration of cannabinoids and terpenes. A central composite rotatable design was used to optimize independent factors (sample-to-solvent ratio, extraction time, extraction temperature, and duty cycle). The optimal conditions for ultrasound- and microwave-assisted extraction were the sample-to-solvent ratios of 1:15 and 1:14.4, respectively, for 30 min at 60 °C. Ultrasound-assisted extraction yielded 14.4% and 14.2% more oil and terpenes, respectively, compared with microwave-assisted extracts. Ultrasound-assisted extraction increased cannabinoid concentration from 13.2−39.2%. Considering reference ground samples, tetrahydrocannabinolic acid increased from 17.9 (g 100 g dry matter−1) to 28.5 and 20 with extraction efficiencies of 159.2% and 111.4% for ultrasound-assisted and microwave-assisted extraction, respectively. Principal component analyses indicate that the first two principal components accounted for 96.6% of the total variance (PC1 = 93.2% and PC2 = 3.4%) for ultrasound-assisted extraction and 92.4% of the total variance (PC1 = 85.4% and PC2 = 7%) for microwave-assisted extraction. Sample-to-solvent ratios significantly (p < 0.05) influenced the secondary metabolite profiles and yields for ultrasound-assisted extracts, but not microwave-assisted extracts.

Pharmaceutical pollution of hospital effluents and municipal wastewaters of Eastern Canada

Quantification of drugs residues in wastewaters of different sources could help better understand contamination pathways, eventually leading to effluent regulation. However, limited data are available for hospital-derived wastewaters. Here, an analytical method based on automated on-line solid-phase extraction liquid chromatography tandem mass spectrometry (on-line SPE - UPLC-MS/MS) was developed for the quantification of multi-class pharmaceuticals in wastewaters. Filtrate phase and suspended solids (SPM) were both considered to evaluate the distribution of targeted analytes. Experimental design optimization involved testing different chromatographic columns, on-line SPE columns, and loading conditions for the filtrate phase, and different organic solvents and cleanup strategies for suspended solids. The selected methods were validated with suitable limits of detection, recovery, accuracy, and precision. A total of 30 hospital effluents and 6 wastewater treatment plants were sampled to evaluate concentrations in real field-collected samples. Certain pharmaceuticals were quantified at high levels such as caffeine at 670,000 ng/L in hospital wastewaters and hydroxyibuprofen at 49,000 ng/L in WWTP influents. SPM samples also had high contaminant concentrations such as ibuprofen at 31,000 ng/g in hospital effluents, fluoxetine at 529 ng/g in WWTP influents or clarithromycin at 295 ng/g in WWTP effluents. Distribution coefficients (K_d) and particle-associated fractions (Φ) indicate that pharmaceuticals tend to have better affinity to suspended solids in hospital wastewater than in municipal wastewaters. The results also bring arguments for at source treatment of these specific effluents before their introduction into urban wastewater systems.

Optimization and validation of ultrasound application with a low-temperature method to analyze organochlorine pesticides in smuggled cigarette tobacco

This work presents the optimization and validation of a method to quantify organochlorine pesticides in tobacco samples from smuggled cigarettes using ultrasound application and low-temperature extraction. The combined approach was validated for 20 organochlorine pesticides, achieving recoveries between 73% and 116%, and a relative standard deviation of less than 20%. The method minimized the matrix effect in 65% of the organochlorine pesticides. The limits of detection and quantification varied from 2 to 60 ng g-1 and 120 to 190 ng g-1, respectively. The method was applied to the analysis of 18 brands of smuggled cigarettes. The organochlorine pesticides found in the samples were cis-chlordane (89%), p,p'-dichlorodiphenyldichloroethylene (DDD) and methoxychlor (78%), endosulfan sulfate (67%), heptachlor epoxide, and endosulfan II (61%). The concentrations of the organochlorine pesticides in this study were higher than those in a similar survey on cigarettes marketed in China. The ultrasound application and low-temperature extraction may be an efficient alternative to analyzing tobacco samples since it uses only one extraction solvent, requires low-cost equipment, does not require an additional clean-up step, reduces the environmental impact through minimal waste generation, and can detect low analyte concentrations.

Simultaneous multi-residue pesticide analysis in southern Brazilian soil based on chemometric tools and QuEChERS-LC-DAD/FLD method

A simple and straightforward QuEChERS extraction method was proposed for the simultaneous determination of atrazine (ATZ), desethylatrazine (DEA), desisopropylatrazine (DIA), carbaryl (CBL), carbendazim (CBD), and diuron (DIU) in soil with high agricultural activity from southeastern Brazil, using high-performance liquid chromatography-diode-array detection/fluorescence detection. Screening studies carried out by 2⁴ factorial design indicate better recoveries when less sample (1.0 g) and the volume of solvent (2.0 mL of ACN) were applied, compared to the original QuEChERS method. Furthermore, interactions between factors were not negligible in the experimental set, except for ATZ and DIU, in which only water volume influenced their recovery. The influence of the type (primary secondary amine (PSA), C18, and Florisil) and the sorbent amount ratio to the compounds' concentration were also considered. PSA (25 mg) was selected as the best sorbent without losing analytical response. The limits of quantification (LOQ) were estimated to be 5.0 to 15 µg kg^-1 in the soil matrix. Analytical performances were consistent with linearity (R² ≥ 0.998), recovery from 74.7 to 108%, and relative standard deviations (RSD) between 2.6 and 20.2%. Robustness was assessed by fractional factorial Plackett-Burman design. The method is recommended for chemicals that are soluble in water, and it was successfully applied in the analysis of real soil samples containing the analytes in the range of μg kg^-1, proving to be suitable for the study of soils strongly impacted by agricultural activity.

Advances in pretreatment and analysis methods of aromatic hydrocarbons in soil

Benzene compounds that are prevalent in the soil as organic pollutants mainly include BTEX (benzene, toluene, ethylbenzene, and three xylene isomers) and PAHs (polycyclic aromatic hydrocarbons). These pose a severe threat to many aspects of human health. Therefore, the accurate measurement of BTEX and PAHs concentrations in the soil is of great importance. The samples for analysis of BTEX and PAHs need to be suitable for the various detection methods after pretreatment, which include Soxhlet extraction, ultrasonic extraction, solid-phase microextraction, supercritical extraction, and needle trap. The detection techniques mainly consist of gas chromatography (GC), mass spectrometry (MS), and online sensors, and provide comprehensive information on contaminants in the soil. Their performance is evaluated in terms of sensitivity, selectivity, and recovery. Recently, there has been rapid progress in the pretreatment and analysis methods for the quantitative and qualitative analyses of BTEX and PAHs. Therefore, it is necessary to produce a timely and in-depth review of the emerging pretreatment and analysis methods, which is unfortunately absent from the recent literature. In this work, state-of-art extraction techniques and analytical methods have been summarized for the determination of BTEX and PAHs in soil, with a particular focus on the potential and limitations of the respective methods for different aromatic hydrocarbons. Accordingly, the paper will describe the basic methodological knowledge, as well as the recent advancement of pretreatment and analysis methods for samples containing BTEX and PAHs.

Determination of benzotriazole and benzothiazole derivatives in tea beverages by deep eutectic solvent-based ultrasound-assisted liquid-phase microextraction and ultrahigh-performance liquid chromatography-high resolution mass spectrometry

Benzotriazole (BTRs) and benzothiazole (BTHs) derivatives are a group of high production volume chemicals with emerging health concern, which found in tea beverages raising potential risks for food safety and human health. The present work describes a simple method using a "green" deep eutectic solvent (DES) based-ultrasound-assisted liquid-phase microextraction (UALPME) to rapidly extract BTRs and BTHs from tea beverages, and then applying UHPLC-electrospray ionization (+)-quadrupole time-of-flight mass spectrometry for detection and quantification. To overcome the challenges related to different experimental conditions, a Factorial Multilevel Categoric Design and a Face Centered Central Composite Design were applied to screen and optimize the parameters for the DES-UALPME procedure, respectively. After optimization, the method was validated and shown to possess low limits of quantification (LOQs; 1.5-12 ng mL^-1), high precision (3-13%), and satisfactory accuracy (65-107%). The developed method was then successfully applied for the analysis of some selected BTRs and BTHs in tea beverages.

Base oil recovery from waste lubricant oil by polar solvent extraction intensified by ultrasound

This paper proposes a greener approach to the intensification of base oil recovery for truck engines (32,500 km of use) using ethanol, propan-2-ol, 2-methylpropan-1-ol, and butan-1-ol as solvents for the extraction of base oil, combining mechanical stirring (220 rpm) and ultrasound (25 °C, 24 kHz, and 400 W). The results indicated that the recovery yields of the base oil, using the mechanical stirring and ultrasound (MS-US) system, for ethanol, propan-2-ol, 2-methylpropan-1-ol, and butan-1-ol were approximately 3.1, 25.6, 71.6, and 85.5%, respectively. By contrast, the recovery yields using only mechanical stirring were 8.8, 28.9, 58.9, and 76.1%, respectively. The system with pre-extraction could effectively remove Ca (85.3-93.0%), Mg (67.2-82.9%), Na (31.7-62.5%), and Zn (0.0-71.7%). Finally, the results showed a reduction of almost 100% for the concentrations of Al, Cr, Fe, and Mo in the pre-extraction system. The mechanical stirring (5 min) and ultrasound (5 min) system were able to intensify the extraction process using environmentally friendly solvents.

The use of ultrasound in the South Cone region. Advances in organic and inorganic synthesis and in analytical methods

In organic and inorganic synthesis and in analytical methods, an external conventional heat source is usually applied to carry out a chemical reaction at a high temperature, or an extraction procedure. In the last decades, the use of ultrasound as an alternative energy source has become an interesting field of research in these topics in the South Cone region (Argentina, Chile, Uruguay, Southern Brazil and Paraguay). For this reason, the present review, covering the period 2009 to mid-2021, is a compilation of ultrasound-assisted synthetic and analytical methodologies.

A review of green solvent extraction techniques and their use in antibiotic residue analysis

Antibiotic residues are being continuously recognized in the aquatic environment and in food. Though the concentration of antibiotic residues is typically low, adverse effects on the environment and human health have been observed. Hence, an efficient method to determine numerous antibiotic residues should be simple, inexpensive, selective, with high throughput and with low detection limits. Liquid-based extractions have been exceedingly used for clean-up and preconcentration of antibiotics prior to chromatographic analysis. In order to make methods more green and environmentally sustainable, conventional hazardous organic solvents can be replaced with green solvents. This review presents sampling strategies as well as comprehensive and up-to-date methods for chemical analysis of antibiotic residues in different sample matrices. Particularly, solvent-based sample preparation techniques using green solvents are discussed along with applications in antibiotic residue analysis.

Ultrasound-assisted electromembrane extraction with supported semi-liquid membrane

Electromembrane extraction (EME), involving the migration of charged analytes across a supported liquid membrane (SLM) with an external power supply, is a promising sample preparation method in analytical chemistry. However, the presence of boundary double layers at the SLM/solution interfaces often restricts extraction efficiency. To avoid this, the current work proposed an ultrasound-assisted EME (UA-EME) method based on a novel type of supported semi-liquid membrane (SsLM). The characterizations showed that the SsLM was stable under ultrasound conditions. Ultrasound was found to reduce the boundary double layers and thus increase the mass transfer. Major operational parameters in UA-EME including ultrasound power density, temperature, applied voltage and extraction time were optimized with haloperidol, fluoxetine, and sertraline as model analytes. Under the optimal conditions, extraction recoveries of model analytes in water samples were in the range of 66.8%-91.6%. When this UA-EME method was coupled with LC-MS/MS for detection of the target analytes in human urine samples, the linear range of the analytical method was 10-1000 ng mL^-1, with R² > 0.997 for all analytes. The limits of detection (LOD) and limits of quantification (LOQ) were in the range of 1.7-2.1 ng mL^-1 and 5.7-6.7 ng mL^-1, respectively. The UA-EME expands the application field of ultrasound chemistry and will be very important in development of stable and fast sample preparation systems in the future.

Recent advances in analysis of bisphenols and their derivatives in biological matrices

Biomonitoring is a very useful tool to evaluate human exposure to endocrine-disrupting compounds (EDCs), like bisphenols (BPs), which are widely used in the manufacture of plastics. The development of reliable analytical methods is key in the field of public health surveillance to obtain biomonitoring data to determine what BPs are reaching people's bodies. This review discusses recent methods for the quantitative measurement of bisphenols and their derivatives in biological samples like urine, blood, breast milk, saliva, and hair, among others. We also discuss the different procedures commonly used for sample treatment, which includes extraction and clean-up, and instrumental techniques currently used to determine these compounds. Sample preparation techniques continue to play an important role in the analysis of complex matrices, for liquid matrices the most commonly employed is solid-phase extraction, although microextraction techniques are gaining importance in this field, and for solid samples ultrasound-assisted extraction. The main instrumental techniques used are liquid and gas chromatography coupled with mass spectrometry. Finally, we present data on the main parameters obtained in the validation of the revised methods. This review focuses on various methods developed and applied for trace analysis of bisphenols, their conjugates, halogenated derivatives, and diglycidyl ethers in biological samples to enable the required selectivity and sensitivity. For this purpose, a review is carried out of the most recent relevant publications from 2016 up to present.

Techniques for the detection and quantification of emerging contaminants

In recent years, the diverse industrial practices and human inputs widely disseminated emerging contaminants (ECs) throughout environmental matrices, which is of great concern. Even at low concentrations, ECs pose major ecological problems and threaten human health and the environment’s biota. Consequently, people’s interest and concerns on the widespread dissemination of environmentally connected ECs of great concern as developed due to their scientific understanding, technical innovation, and socioeconomic awareness. Increased detection of contaminants may occur from climatic, socioeconomic, and demographic changes and the growing sensitivity of analytical techniques. Hence, this article reviews the determination of ECs in ecological specimens, from aquatic setup (river water, marine water, and wastewater), sludge, soil, sediment, and air. Sample collection and the quality measures are summarized. The preparation of samples, including extraction and cleanup and the subsequent instrumental analysis of ECs, are all covered. Traditional and recent extraction and cleanup applications to analyze ECs in samples are reviewed here in this paper. The detection and quantification of ECs using gas chromatography (GC) and liquid chromatography (LC) linked with various detectors, particularly mass spectrometry (MS), is also summarized and explored, as are other possible techniques. This study aims to give readers a more excellent knowledge of how new and improved approaches are being developed and serve as a resource for researchers looking for the best method for detecting ECs in their studies.

Use of green alternative solvents in dispersive liquid-liquid microextraction: A review

Dispersive liquid-liquid microextraction is one of the most widely used microextraction techniques currently in the analytical chemistry field, mainly due to its simplicity and rapidity. The operational mode of this approach has been constantly changing since its introduction, adapting to new trends and applications. Most of these changes are related to the nature of the solvent employed for the microextraction. From the classical halogenated solvents (e.g., chloroform or dichloromethane), different alternatives have been proposed in order to obtain safer and non-pollutants microextraction applications. In this sense, low-density solvents, such as alkanols, switchable hydrophobicity solvents, and ionic liquids were the first and most popular replacements for halogenated solvents, which provided similar or better results than these classical dispersive liquid-liquid microextraction solvents. However, despite the good performances obtained with low-density solvents and ionic liquids, researchers have continued investigating in order to obtain even greener solvents for dispersive liquid-liquid microextraction. For that reason, in this review, the evolution over the last five years of the three types of solvents already mentioned and two of the most promising solvent alternatives (i.e., deep eutectic solvents and supramolecular solvents), have been studied in detail with the purpose of discussing which one provides the greenest alternative.

Determination of benzotriazole and benzothiazole derivatives in human urine by eco-friendly deep eutectic solvent-based ultrasound-assisted liquid-liquid microextraction followed by ultrahigh performance liquid chromatography quadrupole-time-of-flight mass spectrometry

Benzotriazole (BTRs) and benzothiazole (BTHs) derivatives have been classified as high production volume pollutants of emerging concern. The present work describes a rapid and simple process using an eco-friendly deep eutectic solvent (DES) based-ultrasound-assisted liquid-liquid microextraction (DES-UALLME) technique to effectively extract five BTRs and four BTHs in human urine samples, and then applying ultrahigh-performance liquid chromatography and electrospray ionization (+)-quadrupole time-of-flight mass spectrometry (UHPLC-ESI(+)-QTOF-MS) for their detection and quantification. DESs are a group of novel "green" solvents, and their applications in sample pretreatment are appropriate for the requirements for green chemistry, environmental protection and sustainable development. Furthermore, to overcome the challenges related to different experimental conditions, multivariate experimental design approaches conducted by means of a multilevel categorical design and a Box-Behnken Design were applied to screen and optimize parameters that have significant influences on the extraction efficiency of DES-UALLME. After optimization, the method was validated and shown to possess low limits of quantitation (LOQs; 0.4 - 9 ng mL^-1), high precision (3-12%), and high accuracy (mean spiked recoveries; 80-101%). The developed method was then successfully applied for the analysis of BTRs and BTHs in human urine samples. Interestingly, 5,6-dimethyl-1H-benzotriazole (XTR) was detected in almost all of the urine samples, which correlates with its high production and widely applications in industry processes and consumer products in Taiwan. These target analytes could potentially be used as biomarkers to assess exposure of BTRs and BTHs in biomonitoring programs and studies.

The Influence of Extracts from Common Houseleek (Sempervivum tectorum) on the Metabolic Activity of Human Melanoma Cells WM-266-4

Human melanoma cells are known as one of the most aggressive cancer cells, and consequently, melanoma is one of the most incurable cancer diseases. There is intense activity in research and development of potential medicines for malignant diseases, including alternative forms of remedies. Therefore, the purpose of our work was testing extracts from the common houseleek (Sempervivum tectorum) grown in Slovenia to establish its impact on human melanoma cells. Namely, we wanted to verify if the extracts inhibit growth of malignant cells and their metabolic activity. Soxhlet, cold solvent, ultrasound, and supercritical extraction methods were applied to obtain S. tectorum extracts. Polyphenols and proanthocyanins content in acquired extracts was determined as well as their antioxidative potential. For a relevant comparison, Chinese (CHI) dried and Slovenian (SLO) lyophilized S. tectorum was used. Results showed that the highest contents of polyphenols and proanthocyanins were yielded from lyophilized material, which also had the highest antioxidative potential. The focus of our work was on analysis of possible inhibition effects of the extracts on human melanoma cells since no past studies were found regarding the possible effects of S. tectorum on metabolic activity of WM-266-4. We established that in a 24-h incubation period, the extracts inhibited metabolic activity of the cells at their concentrations of 20, 10, 4, 2, 1, 0.2, and 0.02 mg/mL. Extract obtained from SLO S. tectorum (ultrasound extraction with acetone as a solvent), which showed promising results of inhibitory effect on the mentioned cells, was further described since the local plant was the focus of our study. CHI S. tectorum extract (Soxhlet extraction with ehtanol:water mixture = 1:1 as a solvent) showed the highest inhibitory effect on human melanoma cells WM-266-4, although both obtained extracts are suitable for their growth inhibition of this specific cell line. Our results suggest inhibitory ability of S. tectorum extracts on the metabolic activity of WM-266-4 metastatic cell line, suggesting their potential use as an anticancer agent.

Experimental design approaches to optimize ultrasound-assisted simultaneous-silylation dispersive liquid-liquid microextraction for the rapid determination of parabens in water samples

This work describes a rapid solvent-minimized process to effectively determine four common paraben preservatives (methyl-, ethyl-, propyl- and butyl-paraben) in surface water samples. The method involved the use of a combination of a novel ultrasound-assisted simultaneous-silylation within dispersive liquid–liquid microextraction (UASS-DLLME) with detection by gas chromatography-tandem mass spectrometry (GC-MS/MS). To overcome the challenges related to the different experimental conditions, multivariate experimental design approaches conducted by means of a multilevel categorical design and a Box–Behnken design were utilized to screen and optimize parameters that have significant influences on the efficiency of silylation and extraction. The method was then validated and shown to provide low limits of quantitation (LOQs; 1–5 ng L⁻¹), high precision (3–11%), and satisfactory mean spiked recoveries (accuracy; 79–101%). Upon analyzing samples of surface water obtained from the field, we found that, in total, there was a relatively high concentration of the target parabens ranging from 200 to 1389 ng L⁻¹. The sources of the elevated levels of these parabens may be from the release of untreated municipal wastewater in this region, and also due to the widespread application of parabens in personal care and food products.

This work describes a rapid solvent-minimized process to effectively determine four common paraben preservatives (methyl-, ethyl-, propyl- and butyl-paraben) in surface water samples.

Analysis of Polycyclic Aromatic Hydrocarbon in Airborne Particulate Matter Samples by Gas Chromatography in Combination with Tandem Mass Spectrometry (GC-MS/MS)

Polycyclic aromatic hydrocarbons (PAHs), the family of organic contaminations, have been shown to have negative effects on human health. However, until now, the comprehension on occurrence, distribution, and risk assessment of human exposure to PAHs has been limited in Vietnam. In this work, a capillary gas chromatography coupled with electron impact ionization tandem mass spectrometry (GC-EI-MS/MS) has been introduced for analysis of 16 PAHs in some particulate matter samples. PAHs have been separated on the TG 5 ms capillary gas chromatographic column and detected by tandem mass spectrometry in multiple reaction monitoring mode. The PAHs in the particulate matter (PM 2.5 and PM 10) samples were extracted by ultrasonic-assisted liquid extraction and cleaned up by an acidic silica gel solid phase extraction. The linearity range of all analyzed PAHs was from 5 to 2000 ng mL^-1 with R ² ≥0.9990. Limit of detection (LOD) of PAHs in particulate matter sample was from 0.001 ng m^-3 (Br-Naph) to 0.276 ng m^-3 (Fln). The recovery of PAHs was investigated by international proficiency testing samples. The recoveries of PAHs in proficiency testing sample ranged from 79.3% (Chr) to 109.8% (IcdP). The in-house validated GC-EI-MS/MS method was then applied to analysis of some particulate matter samples that were collected in the Hanoi areas. The total concentrations of PAHs in several brands of samples collected from Hanoi were found in the range of 226.3 ng m^-3-706.43 ng m^-3. Among the studied compounds, naphthalene was found at high frequency and ranged from 106.5 ng m^-3 to 631.1 ng m^-3. The main distribution of the PAHs in particulate matter samples was two-ring and three-ring compounds.

Determination of Pharmaceutical Residues by UPLC-MS/MS Method: Validation and Application on Surface Water and Hospital Wastewater

In this study, an analytical method for the simultaneous determination of 7 major pharmaceutical residues in Vietnam, namely, carbamazepine, ciprofloxacin, ofloxacin, ketoprofen, paracetamol, sulfamethoxazole, and trimethoprim, in surface water and hospital wastewater has been developed. The method includes enrichment and clean-up steps by solid phase extraction using mix-mode cation exchange, followed by identification and quantification using an ultrahigh-performance liquid chromatography and tandem mass spectrometry and employing electrospray ionization (UPLC-ESI-MS/MS). Seven target compounds were separated on the reversed phase column and detected in multiple reaction monitoring (MRM) mode within 6 minutes. The present study also optimized the operating parameters of the mass spectrometer to achieve the highest analytical signals for all target compounds. All characteristic parameters of the analytical method were investigated, including linearity range, limit of detection, limit of quantification, precision, and accuracy. The important parameter in UPLC-ESI-MS/MS, matrix effect, was assessed and implemented via preextraction and postextraction spiking experiments. The overall recoveries of all target compounds were in the ranges from 55% to 109% and 56 % to 115% for surface water and hospital wastewater, respectively. Detection limits for surface water and hospital wastewater were 0.005-0.015 µg L^-1 and 0.014-0.123 µg L^-1, respectively. The sensitivity of the developed method was allowed for determination of target compounds at trace level in environmental water samples. The in-house validation of the developed method was performed by spiking experiment in both the surface water and hospital wastewater matrix. The method was then applied to analyze several surface water and hospital wastewater samples taken from West Lake and some hospitals in Vietnam, where the level of these pharmaceutical product residues was still missed. Sulfamethoxazole was present at a high detection frequency in both surface water (33% of analyzed samples) and hospital wastewater (81% of analyzed samples) samples.

Miniaturized analytical methods for determination of environmental contaminants of emerging concern - A review

The determination of contaminants of emerging concern (CECs) in environmental samples has become a challenging and critical issue. The present work focuses on miniaturized analytical strategies reported in the literature for the determination of CECs. The first part of the review provides brief overview of CECs whose monitoring in environmental samples is of particular significance, namely personal care products, pharmaceuticals, endocrine disruptors, UV-filters, newly registered pesticides, illicit drugs, disinfection by-products, surfactants, high technology rare earth elements, and engineered nanomaterials. Besides, an overview of downsized sample preparation approaches reported in the literature for the determination of CECs in environmental samples is provided. Particularly, analytical methodologies involving microextraction approaches used for the enrichment of CECs are discussed. Both solid phase- and liquid phase-based microextraction techniques are highlighted devoting special attention to recently reported approaches. Special emphasis is placed on newly developed materials used for extraction purposes in microextraction techniques. In addition, recent contributions involving miniaturized analytical flow techniques for the determination of CECs are discussed. Besides, the strengths, weaknesses, opportunities and threats of point of need and portable devices have been identified and critically compared with chromatographic methods coupled to mass chromatography. Finally, challenging aspects regarding miniaturized analytical methods for determination of CECs are critically discussed.

Rapid Screening and Quantification of Multi-Class Multi-Residue Veterinary Drugs in Pork by a Modified Quechers Protocol Coupled to UPLC-QOrbitrap HRMS

Background:

A rapid and simple analytical method for the screening and quantification of multi-residues was established by a quick, easy, cheap, effective, rugged and safe (QuEChERS) approach coupled to ultra-performance liquid chromatography and electrospray ionization quadrupole orbitrap high-resolution mass spectrometry (UPLC-Q-Orbitrap HRMS). A total number of 59 veterinary drugs were investigated, which belonged to 12 classes, such as β-agonist, quinolones, sulfonamides, tetracyclines, lincomycin series, triphenylmethane, nitroimidazoles, macrolides, amide alcohols, quinoxalines, steroid hormone and sedatives.

Methods:

The factors which influence the determination of veterinary drugs residues, such as mobile phase, extract solvent, clean up sorbent, and re-dissolved solvent, were optimized by the single factor experiment. The method was sufficiently validated by using the parameters of linearity, sensitivity, accuracy, and repeatability.

Results:

The response of the detector was linear for 59 veterinary drug residues in extensive range (two to three orders of magnitude) with a high coefficient of determination (R2) (0.9995-0.9998). The limit of quantification (LOQ) ranged from 0.1μg/kg to 2.0μg/kg for 59 veterinary drug residues in pork samples. The repeatability was in the range of 1.0%-9.5%. Average recoveries of 59 veterinary drugs at three spiked levels ranged from 53.7%-117.8% with relative standard deviation (RSD) of 1.9%-13.9%. The full MS scan coupled with data-dependent MS/MS mode was applied for screening the target compounds to simultaneously obtain the accurate mass of parent ion and the mass spectrum of fragments. Elemental composition, accurate mass, and retention time and characteristic fragment ions were used to establish a homemade database.

Conclusion:

The ability of the homemade database was verified by analyzing the real pork samples, and the result was satisfactory.

Simultaneous Quantification of Aflatoxin B1, T-2 Toxin, Ochratoxin A and Deoxynivalenol in Dried Seafood Products by LC-MS/MS

Mycotoxins are secondary metabolites produced by fungi. These contaminate dried seafoods during processing and storage and represent a potential health hazard for consumers. A sensitive, selective and accurate liquid chromatography/tandem mass spectrometry (LC-MS/MS) method was established for simultaneous quantification of four common mycotoxins (aflatoxin B₁ (AFB₁), T-2 toxin (T-2), ochratoxin A (OTA) and deoxynivalenol (DON)) in dried shrimp, dried fish and dried mussel products. Mycotoxins were extracted from dried seafood samples by acetonitrile/water (85/15, v/v), subjected to ultrasound for 60 min at 20 °C and cleaned up by defatting with n-hexane. The sample matrix affected the linearity of detection (R² ≥ 0.9974). The limit of detection (LOD) and limit of quantification (LOQ) in dried seafood products varied from 0.1 to 2.0 µg·kg⁻¹ and 0.3 to 5.0 µg·kg⁻¹, respectively. The method was validated by spiking samples with specific mycotoxin levels, and the recoveries, intra-relative standard deviation (RSDs) and inter-RSDs ranged between 72.2–98.4%, 2.8–10.6%, and 5.5–15.4%, respectively. This method was used to analyze 40 dried seafood products purchased from the Zhanjiang seafood market. Results of this product sampling showed that while no DON was detected, AFB₁, T-2 and OTA were detected in 30.8%, 17.5% and 33.3% of the samples, respectively. AFB₁, T-2 and OTA concentrations varied at 0.58–0.89, 0.55–1.34 and 0.36–1.51 µg·kg⁻¹, respectively. Relatively high frequency of contamination and the presence of AFB₁, OTA and T-2 residues indicate the need to monitor mycotoxins in dried seafood products.

Sensors, Biosensors, and Analytical Technologies for Aquaculture Water Quality

In aquaculture industry, fish, shellfish, and aquatic plants are cultivated in fresh, salt, or brackish waters. The increasing demand of aquatic products has stimulated the rapid growth of aquaculture industries. How to effectively monitor and control water quality is one of the key concerns for aquaculture industry to ensure high productivity and high quality. There are four major categories of water quality concerns that affect aquaculture cultivations, namely, (1) physical parameters, e.g., pH, temperature, dissolved oxygen, and salinity, (2) organic contaminants, (3) biochemical hazards, e.g., cyanotoxins, and (4) biological contaminants, i.e., pathogens. While the physical parameters are affected by climate changes, the latter three are considered as environmental factors. In this review, we provide a comprehensive summary of sensors, biosensors, and analytical technologies available for monitoring aquaculture water quality. They include low-cost commercial sensors and sensor network setups for physical parameters. They also include chromatography, mass spectrometry, biochemistry, and molecular methods (e.g., immunoassays and polymerase chain reaction assays), culture-based method, and biophysical technologies (e.g., biosensors and nanosensors) for environmental contamination factors. According to the different levels of sophistication of various analytical techniques and the information they can provide (either fine fingerprint, highly accurate quantification, semiquantification, qualitative detection, or fast screening), we will comment on how they may be used as complementary tools, as well as their potential and gaps toward current demand of real-time, online, and/or onsite detection.

Ionic liquid-based ultrasound-assisted emulsification microextraction for the determination of ranitidine in water samples and pharmaceutical preparations

A new extraction method is proposed for the isolation of the histamine H₂ receptor antagonist ranitidine (RNT) from aqueous samples.

Production of triterpenoid compounds from Ganoderma lucidum spore powder using ultrasound-assisted extraction

When ingested as a dietary supplement, Ganoderma lucidum spore powders (GLSP) provide various health benefits such as enhanced immunity, liver protection and anti-cancer effects. In this study, triterpenoid extraction from GLSP was achieved using an ultrasound-assisted process which was optimized using response surface methodology (RSM). Ultrasound-assisted extraction (UAE) was also compared to the most conventional chemical extraction method. For UAE, optimum extraction conditions were found to be ethanol concentration = 95% v/v; solvent to solid ratio = 50:1 mL/g; ultrasound time = 5.4 min; ultrasound power = 564.7 w, and ultrasound probe distance = 8.2 cm. At optimal UAE conditions, no significant differences were found between experimental (0.97 ± 0.04 %) and predicted values (99%); which indicates appreciable correlation at the 97% confidence interval. The findings show the application of Box-Behnken design (BBD) to predict and optimize triterpenoid yield for UAE of triterpenoid from GLSP. Furthermore, glucose consumption was 2.68 times that of control samples when tested with insulin-resistant HepG2 cell, showing potential use in type 2 diabetes. In addition, triterpenoid extracts show good biocompatibility and inhibition of antioxidant activity.

Analysis of Multiclass Antibiotics in Lettuce by Liquid Chromatography-Tandem Mass Spectrometry to Monitor Their Plant Uptake

The main entry routes of antibiotics in the environment are the application of organic wastes to improve soil quality and the irrigation with recycled water. Once in the environment, antibiotics can be introduced in the food chain through their uptake by crops. This paper describes the development of an analytical method based on ultrasound-assisted extraction for the determination of seven antibiotics in lettuce. The developed method was applied to evaluate antibiotic uptake by lettuce grown in pots fertilized with composted poultry litter doped with a mixture of antibiotics to reach a final concentration of 2.5 µg/g in soil. Lettuce were harvested after 21, 36, and 55 days. Five of the seven studied antibiotics were found in all samples. The highest uptake was found for lincomycin (51 ng/g fresh weight) followed by sulfamethoxazole (44 ng/g fresh weight) and sulfamethazine (21 ng/g fresh weight) in lettuce harvested after 21 days. An important decrease of their levels was observed after 36 days, but these levels remained similar after 55 days. Although levels found in lettuce were low, the presence of antibiotics demonstrates the need for further assessing food safety risks related with the use of soil amendments or irrigation water contaminated with antibiotics.