Comparative study on ultrasonic assisted adsorption of dyes from single system onto Fe3O4 magnetite nanoparticles loaded on activated carbon: Experimental design methodology

Adsorption potential of ionic liquid-modified ZnO nanoparticles for highly efficient removal of azo dye: detailed isotherms and kinetics

In this study, bare and ionic liquid-modified ZnO nanoparticles have been fabricated using microwave irradiation method. The fabricated nanoparticles were characterized by different techniques, viz. XRD, FT-IR, FESEM, and UV-Visible spectroscopy, and were explored as adsorbent for effective sequestration of azo dye (Brilliant Blue R-250) from aqueous media. Various factors affecting the adsorption efficiency of synthesized nanoparticles (bare/ionic liquid-modified) such as concentration of dye, pH of reaction media, dose of nanoparticles, and reaction time were thoroughly investigated with varying experimental conditions; on a magnetic stirrer and in a sonicator. The results exhibited a high adsorption efficiency of ionic liquid-modified nanoparticles for removal of dye as compared to the bare one. Also, an enhanced adsorption was observed via sonication in comparison with magnetic stirring. Different isotherms such as Langmuir, Freundlich, and Tempkin were elaborated. Evaluation of adsorption kinetics showed a linear pseudo-second-order equation for adsorption process. The exothermic and spontaneous nature of adsorption was further confirmed by thermodynamic investigations. As per the results obtained, it is suggested that the fabricated ionic liquid-modified ZnO nanoparticles could successfully remediate the toxic anionic dye from aqueous media. Hence, this system can be utilized for large-scale industrial applications.

A new tannin-based adsorbent synthesized for rapid and selective recovery of palladium and gold: Optimization using central composite design

A tannin-based adsorbent was synthesized by pomegranate peel tannin powder modified with ethylenediamine (PT-ED) for the rapid and selective recovery of palladium and gold. To characterize PT-ED, field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS-Mapping), and Fourier transform infrared spectroscopy (FT-IR) were used. Central composite design (CCD) was used for optimization. The kinetic, isotherm, interference of coexisting metal ions, and thermodynamics were studied. The optimal conditions, including Au (III) concentration = 30 m g L - 1 , Pd (II) concentration = 30 m g L - 1 , adsorbent mass = 26 mg, pH = 2, and time = 26 min with the sorption percent more than 99 %, were anticipated for both metals using CCD. Freundlich model and pseudo-second-order expressed the isotherm and kinetic adsorption of the both metals. The inhomogeneity of the adsorbent surface and the multi-layer adsorption of gold and palladium ions on the PT-ED surface are depicted by the Freundlich model. The thermodynamic investigation showed that P d 2 + and A u 3 + ions adsorption via PT-ED was an endothermic, spontaneous, and feasible process. The maximum adsorption capacity of P d 2 + and A u 3 + ions on PT-ED was 261.189 m g g - 1 and 220.277 m g g - 1 , respectively. The probable adsorption mechanism of P d 2 + and A u 3 + ions can be ion exchange and chelation. PT-ED (26 mg) recovered gold and palladium rapidly from the co-existing metals in the printed circuit board (PCB) scrap, including Ca, Zn, Si, Cr, Pb, Ni, Cu, Ba, W, Co, Mn, and Mg with supreme selectivity toward gold and palladium. The results of this work suggest the use of PT-ED with high selectivity and efficiency to recover palladium and gold from secondary sources such as PCB scrap.

Advancements in textile dye removal: a critical review of layered double hydroxides and clay minerals as efficient adsorbents

The textile industry is responsible for producing large volumes of wastewater that contain a wide variety of dye compounds. This poses a significant environmental hazard and risks harming both ecosystems and living organisms. This review study explores the advancements in adsorption research for dye removal, with a particular emphasis on the development of various adsorbents. The article provides detailed insights into the toxicity and classification of dyes, different treatment techniques, and the characteristics of numerous adsorbents, with special attention to layered double hydroxides (LDH) and clay minerals. A comprehensive list of adsorbents, encompassing natural materials, agricultural by-products, industrial waste, and activated carbon, is discussed for effective removal of different dyes. Furthermore, the review extensively examines the influence of various adsorption variables, such as pH, initial dye concentration, adsorbent dosage, temperature, contact time, ionic strength, and pore volume of the adsorbent. Additionally, the application of response surface methodology for optimizing adsorption variables is elucidated. Commonly, electrostatic attraction, π-π interactions, n-π interactions, van der Waals forces, H-bonding, and pore diffusion play a major role in adsorption mechanism. The review also found that LDH can eliminate a wide range of dyes from wastewater, achieving excellent uptake capacities often exceeding 500 mg/g, with a removal efficiency of 99%. The Langmuir isotherm and pseudo-second-order kinetic equations gave the best fit to most of the adsorption data. Overall, this review serves as a valuable resource for researchers and practitioners seeking sustainable solutions to address the environmental challenges posed by textile dye contamination.

Synthesis and characterization of iron oxide-commercial activated carbon nanocomposite for removal of hexavalent chromium (Cr6+) ions and Mordant Violet 40 (MV40) dye

Iron Oxide-commercial activated carbon nanocomposite (CAC-IO) was prepared from commercial activated carbon (CAC) by the co-precipitation method, and the resulting nanocomposite was used as an adsorbent to remove hexavalent chromium (Cr6+) ions and Mordant Violet 40 (MV40) dye from wastewater. The produced materials (CAC, CAC after oxidation, and CAC-IO) were comparatively characterized using FTIR, BET, SEM, EDX TEM, VSM, and XRD techniques. The adsorption mechanism of Cr6+ ions and MV40 dye on CAC-IO was examined using Langmuir and Freundlich isotherm models.. Different models were applied to know the adsorption mechanism and it was obtained that Pseudo-second order fits the experimental data better. This means that the adsorption of the adsorbate on the nanocomposite was chemisorption. The maximum removal percent of Cr6+ ions by CAC-IO nanocomposite was 98.6% determined as 2 g L-1 adsorbent concentration, 100 mg L-1 initial pollutant concentration, solution pH = 1.6, the contact time was 3 h and the temperature was room temperature. The maximum removal percentage of Mordant Violet 40 dye (C.I. 14,745) from its solutions by CAC-IO nanocomposite was 99.92% in 100 mg L-1 of initial dye concentrations, 1.0 g L-1 of adsorbent concentration, solution pH = 2.07, the contact time was 3 h. The MV40 dye adsorption on CAC-IO was the most fitted to the Freundlich isotherm model. The maximum adsorption capacity was calculated according to the Langmuir model as 833.3 mg g-1 at 2 g L-1 of adsorbent concentration and 400 mg L-1 of initial MV40 dye concentration. The Cr6+ ions adsorption on CAC-IO was more fitted to the Freundlich model with Qmax, equal to 312.50 mg g-1 at 1 g L-1 adsorbent concentration and 400 mg L-1 of Cr6+ ions initial concentrations.

Hybrid magnetic CoFe2O4@γ-Fe2O3@CTAB nanocomposites as efficient and reusable adsorbents for Remazol Brilliant Blue R dye

The main goal of the present survey was to elaborate, characterize and evaluate the efficiency of ferrite-based nanoparticles modified with cetyltrimethylammonium bromide (CTAB) as potential magnetic nanoadsorbents to remove Remazol Brilliant Blue R (RBBR) from water. It is proposed an innovative nanomaterial architecture based on highly magnetic and chemically stable core@shell nanoparticles covered by an adsorptive surface layer of CTAB (CoFe2O4@γ-Fe2O3@CTAB). Samples of two different mean sizes (7.5 and 14.6 nm) were synthesized using a hydrothermal coprecipitation followed by surface treatment and functionalization. Batch tests were performed to evaluate the influence of contact time, temperature, pH, shaking rate, presence of interferents and mean size on the performance of the proposed nanomaterials. The kinetics of the adsorption process followed the pseudo-second-order model with an equilibrium time of 20 min. The adsorption capacity was estimated by the Langmuir isotherm model and was found to be 56.3 mg/g (smaller size) and 45.6 mg/g (larger size) at pH = 3 and a shaking rate of 400 rpm. The process was spontaneous, exothermic, and showed increased randomness. Sulphate ions negatively impacted the removal of RBBR. The best performance of the nanoadsorbent based on smaller mean sizes can be correlated to its larger surface area. Regeneration and readsorption tests showed that the nanoadsorbents retain more than 80% of their original removal capacity, therefore they can be effectively recycled and reused.

Sonoactivated Nanomaterials: A potent armament for wastewater treatment

The world is currently facing a critical issue of water pollution, with wastewater being a major contributor. It comes from different types of pollutants, including industrial, medical, agricultural, and domestic. Effective treatment of wastewater requires efficient degradation of pollutants and carcinogens prior to discharge. Commonly used methods for wastewater treatment include filtration, adsorption, biodegradation, advanced oxidation processes, and Fenton oxidation, among others.The sonochemical effect refers to the decomposition, oxidation, reduction, and other reactions of pollutant molecules in wastewater upon ultrasound activation, achieving pollutants removal. Furthermore, the micro-flow effect generated by ultrasonic waves creates tiny bubbles and eddies. This significantly increases the contact area and exchange speed of pollutants and dissolved oxygen, thereby accelerating pollutant degradation. Currently, ultrasonic-assisted technology has emerged as a promising approach due to its strong oxidation ability, simple and cheap equipments, and minimal secondary pollution. However, the use of ultrasound in wastewater treatment has some limitations, such as high energy consumption, lengthy treatment time, limited water treatment capacity, stringent water quality requirements, and unstable treatment effects. To address these issues, the combination of enhanced ultrasound with nanotechnology is proposed and has shown great potential in wastewater treatment. Such a combination can greatly improve the efficiency of ultrasonic oxidation, resulting in an improved performance of wastewater purification. This article presents recent progress in the development of sonoactivated nanomaterials for enhanced wastewater disposal. Such nanomaterials are systematically classified and discussed. Potential challenges and future prospects of this emerging technology are also highlighted.

Extensive sorption of Amoxicillin by highly efficient carbon-based adsorbent from palm kernel: Artificial neural network modeling

In the present study, a new sorbent was fabricated from Palm kernel (PK) by dry thermochemical activation with NaOH and characterized by FTIR, X-ray diffraction, FE-SEM and BET, which was used for the Amoxicillin (AMX) sorption from aqueous solution. The influence of effective parameters such as pH, reaction time, adsorbent dosage, AMX concentration and ionic strength on the sorption efficacy of AMX removal were evaluated. The main functional groups on the surface of the magnetic activated carbon of Palm Kernel (MA-PK) were C-C, C-O, C[bond, double bond]O and hydroxyl groups. The specific surface of char, activated carbon Palm Kernel (AC-PK) and MA-PK were 4.3, 1648.8 and 1852.4 m2/g, respectively. The highest sorption of AMX (400 mg/L) was obtained by using 1 g/L of sorbent at solution pH of 5 after 60 min contact time, which corresponding to 98.77%. Non-linear and linear models of isotherms and kinetics models were studied. The data fitted well with Hill isotherm (R2 = 0.987) and calculated maximum sorption capacity were 719.07 and 512.27 mg/g from Hill and Langmuir, respectively. A study of kinetics shows that the adsorption of AMX follows the Elovich model with R2 = 0.9998. Based on the artificial neural network (ANN) modeling, the MA-PK dosage and contact time showed the most important parameters in the removal of AMX with relative importance of 36.5 and 25.7%, respectively. Lastly, the fabricated MA-PK was successfully used to remove the AMX from hospital wastewater.

Development of magnetic dispersive micro-solid phase extraction of four phenolic compounds from food samples based on magnetic chitosan nanoparticles and a deep eutectic supramolecular solvent

A magnetic dispersive micro-solid phase extraction technique (CS@Fe₃O₄-MD-μSPE-DESP) based on magnetic chitosan nanoparticles and a deep eutectic supramolecular solvent was developed and applied to determinations of four phenolic compounds in food samples. To prevent environmental pollution and the introduction of toxic substances, deep eutectic supramolecular solvents (DESPs), which exhibited greater desorption capacities than conventional organic solvents and deep eutectic solvents, were used as novel green eluents for the first time. Some important parameters were screened by the Plackett-Burman method and then further optimized with response surface methodology (RSM). Under the optimal conditions, the proposed method showed excellent methodological indices with linearity over the range 0.1-200.0 µg·mL^-1, R² > 0.9988, extraction recoveries above 94.8 %, and precision (RSD%) below 2.9 %. The established method finishes the process of adsorption and desorption in approximately 3 min and enhances the efficiency for determination of phenolic compounds.

Performance of Pristine versus Magnetized Orange Peels Biochar Adapted to Adsorptive Removal of Daunorubicin: Eco-Structuring, Kinetics and Equilibrium Studies

Drugs and pharmaceuticals are an emergent class of aquatic contaminants. The existence of these pollutants in aquatic bodies is currently raising escalating concerns because of their negative impact on the ecosystem. This study investigated the efficacy of two sorbents derived from orange peels (OP) biochar (OPBC) for the removal of the antineoplastic drug daunorubicin (DNB) from pharmaceutical wastewater. The adsorbents included pristine (OPBC) and magnetite (Fe₃O₄)-impregnated (MAG-OPBC) biochars. Waste-derived materials offer a sustainable and cost-effective solution to wastewater bioremediation. The results showed that impregnation with Fe₃O₄ altered the crystallization degree and increased the surface area from 6.99 m²/g in OPBC to 60.76 m²/g in the case of MAG-OPBC. Placket-Burman Design (PBD) was employed to conduct batch adsorption experiments. The removal efficiency of MAG-OPBC (98.51%) was higher compared to OPBC (86.46%). DNB adsorption onto OPBC followed the D-R isotherm, compared to the Langmuir isotherm in the case of MAG-OPBC. The maximum adsorption capacity (q_max) was 172.43 mg/g for MAG-OPBC and 83.75 mg/g for OPBC. The adsorption kinetics for both sorbents fitted well with the pseudo-second-order (PSO) model. The results indicate that MAG-OPBC is a promising adsorbent for treating pharmaceutical wastewater.

New insights on the adsorption of phenol red dyes from synthetic wastewater using activated carbon/Fe2(MoO4)3

Water shortage is considered as one of the main challenges of human life. A practical solution to this problem is the wastewater treatment. The removal of dyes from wastewaters has received considerable critical attention by researchers due to their high volume and toxicity. In the current research, the adsorption of phenol red dyes from synthetic wastewater using the activated carbon produced from Mespilus germanica modified with Fe₂(MoO₄)₃ was studied. The proposed adsorbent was characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray analysis (EDX)/Map, Brunauer-Emmett-Teller (BET), and Raman techniques. The optimal adsorption operating parameters including pH, stirring rate, temperature, dosage of adsorbent, dye initial concentration, and contact time were 3, 500 rpm, 25 °C, 1 g/L, 10 mg/L, and 60 min, respectively. Furthermore, the successful regeneration of the adsorbent for 3 times, using methanol solution as a regeneration medium, denoted its capability in performing adsorption and desorption processes. Equilibrium studies showed that the adsorption of phenol red dyes by activated carbon (AC)/Fe₂(MoO₄)₃ was desirable and physical and the experimental data were fitted well by the Freundlich model. In addition, the kinetic behavior of the current adsorption process was well described by the pseudo-second-order kinetic model, while thermodynamic calculations showed that the process was exothermic and spontaneous.

Magnetic layered double hydroxide composite as new adsorbent for efficient Cu (II) and Ni (II) ions removal from aqueous samples: Adsorption mechanism investigation and parameters optimization

In this work, the magnetic layered double hydroxide composite as a new adsorbent was synthesized and applied for efficient copper (II) and nickel (II) ions removal from aqueous samples. After fabrication, the adsorbent was identified and characterized via Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Field-emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy and vibrating sample magnetometer (VSM), while FE-SEM reveals and denote layered structure of present adsorbent. The magnetic strength of 20.34 emu g^-1 supplies sufficient magnetic property which leads to a solution fast separation of the adsorbent from the sample solution by an external magnet. Then, central composite design (CCD) based on response surface methodology (RSM) was used to optimize the effects of various parameters on the removal process and accordingly best operational conditions was fixed at: 0.039 g of adsorbent, 6.31 min sonication, pH (8) and 17 mgl^-1 of both copper (II) and nickel (II) ions concentrations, respectively. Moreover, the "Lack of Fit p-values" of analysis of variance were obtained to be 0.3758 and 0.8750 for nickel (II) and copper (II) ions, respectively which is not significant value denoting suitability of the current model. Amongst different isotherm and kinetic models, the current adsorption process followed the Freundlich and pseudo-second-order models, while the criterion for judgment is based on their higher correlation coefficients (more than 0.9) compared to other models. Kinetic judgment is based on the closeness of experimental and theoretical adsorption capacity and higher R² values. The Freundlich model based on the multilayer process occurs owing to the adsorption of ions onto the heterogeneous surface of the adsorbent. The adsorbent showed the maximum adsorption capacities of 200.00 mg g^-1 and 109.92 mg g^-1 for Cu²⁺ and Ni²⁺ ions, respectively. Experimental results explore that the chemical and electrostatic interactions were responsible for the under-study model ions. The relative standard deviations assign to both metal ions adsorption was 1.63-3.78% representing the applicability of the composite for practical purposes.

Magnetic Fe3O4 embedded chitosan-crosslinked-polyacrylamide composites with enhanced removal of food dye: Characterization, adsorption and mechanism

The water solubility in acid solution, relative low adsorption capacities and unsatisfactory separation performance limit application of traditional chitosan-based adsorbents in wastewater treatment. To break the limitation, a hydrophilic magnetic Fe₃O₄ embedded chitosan-crosslinked-polyacrylamide composites (abbreviated as m-CS-c-PAM) were prepared by a two-step method. The m-CS-c-PAM composites were systematically characterized using SEM, XRD, FTIR, VSM, TGA and BET. Sunset yellow (SY) was selected as model food dye to investigate adsorption kinetics and thermodynamic parameters of food dye adsorption onto m-CS-c-PAM. Compared with magnetic Fe₃O₄/chitosan, m-CS-c-PAM can adapt to a wider range of pH (2-10) and resist the presence of inorganic salts. m-CS-c-PAM was proved to have high adsorption capacity (359.71 mg g^-1) for SY dye at 298 K, much higher than magnetic Fe₃O₄/chitosan and many reported adsorbents. Moreover, m-CS-c-PAM could be rapidly and efficiently separated from treated solution within 15 s by an external magnet and regenerated by NaOH solution. With its excellent adsorption capacity, pH-independent adsorption capability for food dye, easy and convenient separation ability, satisfactory reusability, m-CS-c-PAM can be a promising material for food wastewater treatment.

Design of multifunctional C@Fe3O4-MoO3 binary nanocomposite for applications in triphenylmethane textile dye amelioration via ultrasonic adsorption and electrochemical energy storage

In this paper, we present the synthesis of C@Fe₃O₄-MoO₃ binary composite were prepared through the facile hydrothermal process. The ultrasonic aided adsorption efficacy was evaluated by studying triphenylmethane dye's adsorption potential. The ultrasonic aided adsorption capacity towards crystal violet was 993.6 mg/g, which is remarkably higher and best fitted with the Langmuir isotherm model and followed pseudo-second-order kinetics. The electrochemical studies working electrode have been prepared with 80 wt% active material, 10 wt% carbon black, and 10% polyvinylidene difluoride to evaluate energy storage characteristics. The C@Fe₃O₄-MoO₃ demonstrated an excellent specific capacitance of 40.94 F/g with better retention and stability, making it a potential cathode material for next-generation electrochemical energy storage devices.

Investigation of the Adsorption Process of Chromium (VI) Ions from Petrochemical Wastewater Using Nanomagnetic Carbon Materials

Magnetic mesoporous carbon (MMC) and magnetic activated carbon (MAC) are good functionalized carbon materials to use when applying environmental techniques. In this work, a series of efficient magnetic composite adsorbents containing Fe₃O₄ and carbon were prepared successfully and used for the adsorption of Cr(VI) ions in petrochemical wastewater. The morphology and structure of these magnetic adsorbents were characterized with FTIR, TG, XRD, VSM, BET, and SEM technologies. The effect of different factors, such as pH, adsorption time, initial Cr(VI) ions' concentration, Fe₃O₄ loading, and adsorption time, on the adsorption behavior were discussed. The results showed that the 8%Fe₃O₄@MMC adsorbent exhibited a high removal rate, reutilization, and large adsorption capacity. The corresponding adsorption capacity and removal rate could reach 132.80 mg·g^-1 and 99.60% when the pH value, adsorption time, and initial Cr(VI) ions' concentration were 2, 180 min, and 80 mg·L^-1 at 298 K. Four kinds of adsorption isotherm models were used for fitting the experimental data by the 8%Fe₃O₄@MMC adsorbent at different temperatures in detail, and a kinetic model and thermodynamic analysis also were performed carefully. The reutilization performance was investigated, and the Fe₃O₄@MMC adsorbent exhibited greater advantage in the adsorption of Cr(VI) ions. These good performances can be attributed to a unique uniform pore structure, different crystalline phases of Fe₃O₄ particles, and adsorption potential rule. Hence, the 8%Fe₃O₄@MMC adsorbent can be used in industrial petrochemical wastewater treatment.

Recent Literature Review of Significance of Polypyrrole and Its Biocomposites in Adsorption of Dyes from Aqueous Solution

The usage of dyes has been tremendously augmented due to industrialization and human’s intrinsic fascination with colors. Owing to their excessive usage in industries like textiles, food, cosmetics, paints, printing etc., it is indisputably a contributing factor in aquatic pollution. Dyes effluents have emerged as a burgeoning challenge. Owing to issues such as toxicity, mutagenicity, and disturbed photosynthesis associated with dye contamination, it is crucial to look for an explication to deal with this challenge. Polypyrrole-based biocomposites have been reported as good adsorbents for textile wastewater treatment. In the last decade, numerous studies have stated the effective removal of dyes via Polypyrrole-based biocomposites. This review concentrates on the implication of different Polypyrrole-based biocomposites for decontamination of dyes and synthesis methods, characteristics, and mechanism of dyes degradation by these biocomposites from wastewater.

Efficient Removal of Cr(VI) Ions in Petrochemical Wastewater Using Fe3O4@Saccharomyces cerevisiae Magnetic Nanocomposite

Saccharomyces cerevisiae (SC) is a widely available biobased source for function material. In this work, a kind of new efficient magnetic composite adsorbent containing Fe₃O₄ and SC was prepared successfully and used for the removal of Cr(VI) ions in petrochemical wastewater. The morphology and structure of this magnetic adsorbent were characterized with FT-IR, TG, XRD, VSM, SEM and XPS. The effect of the different factors such as pH, adsorption time, initial Cr(VI) ions concentration and adsorption temperature on the adsorption behavior were investigated. The results showed that 10%-Fe₃O₄@SC exhibited high removal rate, reutilization and large removal capacity. The corresponding removal capacity and removal rate could reach 128.03 mg/g and 96.02% when the pH value was 2, adsorption time was 180 min, and initial Cr(VI) ions concentration were 80 mg/L at 298 K. The kinetics followed the pseudo-first-order, which indicated that the adsorption behavior of 10%-Fe₃O₄@SC for Cr(VI) ions belonged to the physical adsorption and chemical adsorption co-existence. The thermodynamic study showed that the adsorption process was spontaneous and exothermic. It still showed better adsorption performance and reutilization after the fifth adsorption-desorption experiment. The possible mechanism of Cr(VI) ions adsorption onto the 10%-Fe₃O₄@SC magnetic adsorbent has been discussed. Hence, this new adsorbent will be a candidate for industry-level applications in petrochemical wastewater containing Cr(VI) ions.

A Combined Catalytic Ozonation-MBR Approach to Remove Contaminants from the Mature Landfill Leachate in the Yellow River Basin

The mature landfill leachate (MLL) is characterized by a large number of fulvic acids and humic acids, which is refractory organic matter and can be cleaned by ozone oxidation. However, the poor property of mass transfer prohibits the widespread use of ozone oxidation in actual leachate treatment. Meanwhile, some combined processes are adopted to treat the mature landfill leachate, which places catalytic ozonation before the membrane bioreactor (MBR) process to enhance the biodegradability of MLL. Thus, this research is conducted to investigate the practicability of applying nano-Fe₃O₄ loaded cow-dung ash (Fe₃O₄@CDA) and biological post-treatment with MBR for the effective removal of pollutants from MLL and puts forward the variation of organics in leachate between catalytic ozonation and MBR. The addition of catalytic ozonation not only improved the removal of hazardous organics but also enhanced the biodegradability of the leachate and favored the subsequent MBR process. Chemical oxygen demand (COD) removal in the catalytic ozonation step was optimized, and 53% removal was obtained at pH = 7, catalyst dosage = 1.0 g/L, and O₃ dosage = 3.0 g/L. After the MBR process, COD in effluent stabilized in the range of 57.85-65.38 mg/L, and the variation range of the ammonia nitrogen (NH₃-N) concentration was 5.98-10.24 mg/L. The catalytic ozonation-MBR integrated process showed strong feasibility in dealing with the biologically pre-treated leachate.

Preparation of Magnetic Activated Carbon by Activation and Modification of Char Derived from Co-Pyrolysis of Lignite and Biomass and Its Adsorption of Heavy-Metal-Containing Wastewater

Adsorption with activated carbon (AC) is an important method for the treatment of heavy metal wastewater, but there are still certain challenges in the separation and reuse of activated carbon. The preparation of magnetic activated carbon (MAC) by modifying AC is one of the effective means to realize the separation of AC from solution after the adsorption process. In this work, lignite and poplar leaves were used as raw materials for co-pyrolysis, and the co-pyrolysis char was activated and modified to prepare MAC. The structure and properties were characterized by VSM, N2 adsorption, SEM, XRD, and FT-IR. At the same time, the adsorption performance of MAC on wastewater containing Pb and Cd ions was studied. The results show that the prepared MAC contains Fe3O4, and the saturation magnetization (Ms) of the MAC is 13.83 emu/g; the specific surface area of the MAC is 805.86 m2/g, and the micropore volume is 0.23 cm3/g; the MAC exhibited a good porous structure. When the pH value of the solution was 5, the adsorption time was 120 min, the dosage of MAC was 4 g/L, the initial concentration of Pb ion solution was 50 mg/L, and that of Cd ion solution was 25 mg/L, and the adsorption temperature was 30 °C, the adsorption efficiency of Pb, Cd ions were 84.40 and 78.80%, respectively, and the adsorption capacities were 10.55 and 4.93 mg/g, respectively. The adsorption of Pb and Cd ions by MAC conforms to the Langmuir adsorption model, which is a monolayer adsorption. The adsorption process is mainly chemical adsorption, which can be better described by the pseudo-second-order model. The adsorption thermodynamic analysis showed that the adsorption of Pb and Cd ions by MAC was a spontaneous reaction, and the higher the temperature, the stronger the spontaneity.

Adsorption and Removal of Mercury(II) by a Crosslinked Hyperbranched Polymer Modified via Sulfhydryl

In this study, the highly crosslinked hyperbranched polyamide-amines (H-PAMAMs) were first prepared via one-pot methods and then modified with thiourea to synthesize a novel adsorbent containing sulfhydryl groups (CHAP-SH), which was used to adsorb Hg(II) ions from aqueous solutions. The adsorption characteristics and mechanism of CHAP-SH for Hg(II) ions were systematically studied. As expected, CHAP-SH exhibited a rapid removal performance toward Hg(II), and the maximum adsorption capacity was 282.74 mg/g at 318 K and pH = 4.5. The whole adsorption behavior could be well described by the pseudo-second-order kinetic model and Langmuir and Redlich-Peterson adsorption isotherm models, which reflected that the adsorption process was mainly monolayer chemisorption. Meanwhile, CHAP-SH had strong selectivity for Hg(II) in the presence of multimetal ions, and it had excellent recoverability after five cycles. In order to further elucidate the adsorption mechanism, the adsorbents before and after adsorption were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and energy-dispersive X-ray spectroscopy, and the results showed that the nitrogen-containing, oxygen-containing, and sulfur-containing groups in the adsorbent molecule had synergistic complexation with Hg(II). These results indicated that the adsorbents had great potential in the future treatment of aqueous solutions containing Hg(II).

Ultrasound-assisted adsorption on porous ceramic for removal of iron in water

This study proposes the use of an ultrasound-assisted adsorption system coupled to porous ceramic fragments to improve the removal of iron from FeSO₄ aqueous solution. Ultrasound was applied using an ultrasound bath at a low frequency (37 kHz, 330 W). The optimized conditions for Fe removal were achieved by 7 g of adsorbent, 40 min of sonication, 20 mg L^-1 of initial Fe concentration, and 30 °C of reaction temperature. After optimizing the conditions, the method was applied for the removal of iron in groundwater. A central composite design and response surface methodology were used to evaluate the degree to which different variables had a significant effect on iron removal. The efficiency of iron removal using the selected conditions for FeSO₄ solution was near to 100%. However, for groundwater samples, the maximum iron removal efficiencies of the system with and without ultrasound were 80.7% and 51.1%, respectively, indicating that the adsorption with ultrasound was significantly higher than that without ultrasound. It was shown that the proposed ultrasound-assisted adsorption system can be used to enhance the removal of inorganic iron from groundwater.

Highly enhanced dye adsorption of MoO3 nanoplates fabricated by hydrothermal-calcination approach in presence of chitosan and thiourea

Water pollution by organic dyes poses great challenge to the environment and living organism. Hence effective removal of organic dyes by cost effective methods have received significant attention in recent years. Herein, we report the complete removal of organic dyes (rhodamine B), methylene blue) and eosin yellow) from water via effective adsorption by MoO₃ catalyst. Hydrothermally synthesised MoO₂ (1) and amorphous MoS_x (2) using ammonium molybdate without and with thiourea exhibited low dye adsorption. In contrast, crystalline micro/nanoplates of MoO₃ (3 and 4) obtained from calcination of 1 and 2 showed highly enhanced dye adsorption. Particularly 4 showed higher dye adsorption compared to 3. UV-Visible absorption studies confirmed complete removal of organic dyes upon stirring with MoO₃ catalyst. Dye removal studies further revealed that cationic dyes are adsorbed faster than anionic dye that could be attributed to the surface charge of MoO₃. Interestingly, the adsorbed dyes were not released from MoO₃ for more than 50 days. The exhausted MoO₃ catalyst can be recovered by annealing at 400 °C. MoO₃ catalyst has also been used as packing materials in dropper column and demonstrated effective removal of dyes by passing through dyes separately as well as mixture.

A comprehensive review on the removal of noxious pollutants using carrageenan based advanced adsorbents

Rapid industrial development is associated with high discharge of toxic pollutants into the environment. The industries discharge their wastewater containing organic pollutants directly into the water system without treating them that has posed many serious threats to environmental protection. The use of bioadsorbents for the removal of such toxic pollutants from the waste water due to its simple synthesis, easy operation, effectiveness, and economic viability have emerged a new dimension in the wastewater treatment approaches. Various adsorbents have been prepared to examine their adsorption capacity against different adsorbates, but, to attain sustainability, biocompatibility, and biodegradation, bio-adsorbents have been found to won the battle. Seaweed derived polysaccharide; Carrageenan (CR) has been proven to be an excellent adsorbent for the wastewater treatment. It has been successfully modified with various components to form CR based-magnetic composites, hydrogels, nanoparticle modified CR composites and many others to enrich and diversify its properties. In this review, we have explained the adsorption behaviour of various carrageenan based adsorbents for the removal of different dyes. The influence of various parameters such as the effect of initial concentration, adsorbent dosage, contact time, pH, temperature, and ion concentration on dye adsorption is well explained. This paper also summarizes the structure, morphology, swelling ability, and thermal stability of carrageenan. The data also expounds on the adsorption capacity, kinetic model, isotherm model, and nature of the adsorption process. Different types of solvents are used for the regeneration and reusability of carrageenan adsorbents and their regeneration studies and desorption efficiency is well-explained. The adsorption mechanism of dyes onto carrageenan based adsorbents has been well described in this review. This review provides a deep insight about the use of carrageenan based adsorbents for the wastewater treatment.

Recent advances of magnetite nanomaterials to remove arsenic from water

Pure water is one of the major requirements for living beings but water bodies are contaminated with toxic pollutants and heavy metals. Around 225–500 million people on the earth depend on groundwater, which is highly contaminated by arsenic. Arsenic impurities are present in water as arsenite As(iii) and arsenate As(v). Arsenic is a highly toxic metalloid ranking one in toxicity. Researchers have been exploring new techniques and methods to purify water. Magnetic nanoparticles have high absorption and reaction capabilities due to their high surface-to-volume ratio and quantum size effects. Due to their high magnetization, adsorption behaviour, and biodegradability, magnetite nanomaterials are considered excellent materials to purify water. These nanomaterials and their composites are cost-effective as well as they can be easily separated, regenerated, and reused. This review gives a recent overview of the potential of magnetite nanoparticles and their composites to treat contaminated water and remove unwanted arsenic impurities.

Pure water is one of the major requirements for living beings but water bodies are contaminated with toxic pollutants and heavy metals.

Methyl Orange Adsorption onto Magnetic Fe₃O₄/Carbon (AC, GO, PGO) Nanocomposites

In this study, carbonaceous nanomaterials (Activated Carbon (AC), Graphene Oxide (GO) and Porous Graphene Oxide (PGO)) were synthesized and attached to Fe₃O₄ magnetic powder for the effective removal of synthetic Methyl Orange (MO). AC and GO were successfully conjugated with Fe₃O₄ whilst PGO was not due to its surface functional groups. The morphology and chemical structure of the Fe₃O₄/Carbon nanocomposites were characterized by the N₂ adsorption, Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD), Scanning electron microscope (SEM), Transmission electron microscope (TEM) and Vibrating sample magnetometer (VSM). Batch adsorption experiments were performed and showed significant removal efficiency of 90% at the first ten minutes for Fe₃O₄/AC nanocomposite. Analysis of adsorption equilibrium revealed that AC/Fe₃O₄ is well fitted with Langmuir model, a homogeneous adsorption having an adsorption capacity of 270 mg/g. The GO/Fe₃O₄ can fit with both Langmuir and Freundlich models indicating multilayer adsorption on the surface of the adsorbent with an adsorption capacity of 81.9 mg/g. In the case of adsorption kinetics, both adsorbents follow the pseudo second order kinetics model showing high F?² values. Both adsorbents demonstrated advantageous superparamagnetic properties for their easy recovery from aqueous solutions and prospective applications to toxic removal in water and wastewater.

Starch-based magnetic nanocomposite as an efficient absorbent for anticancer drug removal from aqueous solution

In this study, carboxymethyl cassava starch (CMCS)-functionalized magnetic nanoparticles (CMCS@Fe₃O₄) were synthesized via a simple one-pot co-precipitation method using CMCS materials with varying degrees of substitution, and used for the adsorption/removal of doxorubicin hydrochloride (Dox; a clinically available anti-cancer drug) from aqueous solution. The adsorption of Dox was studied using experimental conditions with varied pH, temperature, initial Dox concentration, and CMCS@Fe₃O₄ dosage. The CMCS@Fe₃O₄ adsorbents were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and vibrating sample magnetometry. Each CMCS@Fe₃O₄ adsorbent exhibited a cubic inverse spinel iron oxide phase, small particle size, favorable magnetic properties, and good thermal stability. Batch adsorption experiments showed that the Dox adsorption efficiency reached 85.46% at a CMCS@Fe₃O₄ concentration of 20 mg mL^-1 at 303 K in pH 7.0. The adsorption experimental results indicated that the adsorption kinetics followed a pseudo-second-order model and the Langmuir equation. Considering the environmentally nontoxic nature of Fe₃O₄ and starch, the CMCS@Fe₃O₄ material demonstrated significant potential for removing Dox from aqueous solution and in magnetic targeted drug delivery systems for synergistic tumor treatments.

Rapid and high selective removal of Hg(II) ions using tannic acid cross-linking cellulose/polyethyleneimine functionalized magnetic composite

In this study, a new tannic acid cross-linking cellulose/polyethyleneimine functionalized magnetic composite (MCP) as a biomass adsorbent of Hg(II) ions was prepared. The morphology and structure of MCP were characterized with FT-IR, TG, XRD, SEM and TEM. The effect of the different factors such as pH, contact time, initial Hg(II) ion concentration, and adsorption temperature on the adsorption behavior was investigated. The results showed that MCP exhibited an excellent selectivity and reutilization, fast removal rate, and very high adsorption capacity. The corresponding adsorption capacity and removal rate of could reach 99.00% and 247.51 mg/g when the pH value, adsorption time, Hg(II) ion concentration were 5, 180 min and 100 mg/L at 293 K. The kinetics followed the pseudo-second-order, which indicated that the adsorption behavior of MCP for Hg(II) ion belonged to the chemical adsorption process and external diffusion. The thermodynamic study showed that the adsorption process was a spontaneous and exothermic process. After the fifth adsorption-desorption experiment, it still had better adsorption performance and reutilization. All in all, MCP with highly stable and efficient, as well as excellent reusability will be a candidate for industry-level applications from wastewater with Hg(II) ions.

Adsorption of Crystal Violet Dye Using Activated Carbon of Lemon Wood and Activated Carbon/Fe3O4 Magnetic Nanocomposite from Aqueous Solutions: A Kinetic, Equilibrium and Thermodynamic Study

Activated carbon prepared from lemon (Citrus limon) wood (ACL) and ACL/Fe₃O₄ magnetic nanocomposite were effectively used to remove the cationic dye of crystal violet (CV) from aqueous solutions. The results showed that Fe₃O₄ nanoparticles were successfully placed in the structure of ACL and the produced nanocomposites showed superior magnetic properties. It was found that pH was the most effective parameter in the CV dye adsorption and pH of 9 gave the maximum adsorption efficiency of 93.5% and 98.3% for ACL and ACL/Fe₃O₄, respectively. The Dubinin–Radushkevich (D-R) and Langmuir models were selected to investigate the CV dye adsorption equilibrium behavior for ACL and ACL/Fe₃O₄, respectively. A maximum adsorption capacity of 23.6 and 35.3 mg/g was obtained for ACL and ACL/Fe₃O₄, respectively indicating superior adsorption capacity of Fe₃O₄ nanoparticles. The kinetic data of the adsorption process followed the pseudo-second order (PSO) kinetic model, indicating that chemical mechanisms may have an effect on the CV dye adsorption. The negative values obtained for Gibb’s free energy parameter (−20 < ΔG < 0 kJ/mol) showed that the adsorption process using both types of the adsorbents was physical. Moreover, the CV dye adsorption enthalpy (ΔH) values of −45.4 for ACL and −56.9 kJ/mol for ACL/Fe₃O₄ were obtained indicating that the adsorption process was exothermic. Overall, ACL and ACL/Fe₃O₄ magnetic nanocomposites provide a novel and effective type of adsorbents to remove CV dye from the aqueous solutions.

Adsorption Characteristics of Pristine and Magnetic Olive Stones Biochar with Respect to Clofazimine

Olive stone biochars (OSBC), both pristine and following magnetization (MAG-OSBC), were utilized as eco-friendly and cost-effective sorbents for the antituberculosis, clofazimine (CLOF). Morphologies, textures, surface functionalities, and thermal stabilities of both adsorbents were explored using SEM, EDX, TEM, BET, FT-IR, Raman, XRD and TGA analyses. SEM analysis showed meso- and macroporous surfaces. BET data showed that the MAG-OSBC possesses a larger surface area (33.82 m²/g) and pore volume. Batch adsorption studies were conducted following the experimental scenario of Box-Behnken (BB) design. The adsorption efficiency of both adsorbents was evaluated in terms of the % removal (%R) and the sorption capacity (q_e, mg/g). Dependent variables (%R and q_e) were maximized as a function of four factors: pH, sorbent dose (AD), the concentration of CLOF ([CLOF]), and contact time (CT). A %R of 98.10% and 98.61% could be obtained using OSBC and MAG-OSBC, respectively. Equilibrium studies indicated that both Langmuir and Freundlich models were perfectly fit for adsorption of CLOF. Maximum adsorption capacity (q_max) of 174.03 mg/g was obtained using MAG-OSBC. Adsorption kinetics could be best illustrated using the pseudo-second-order (PSO) model. The adsorption-desorption studies showed that both adsorbents could be restored with the adsorption efficiency being conserved up to 92% after the sixth cycles.

Eco-structured Adsorptive Removal of Tigecycline from Wastewater: Date Pits' Biochar versus the Magnetic Biochar

Non-magnetic and magnetic low-cost biochar (BC) from date pits (DP) were applied to remove tigecycline (TIGC) from TIGC-artificially contaminated water samples. Pristine biochar from DP (BCDP) and magnetite-decorated biochar (MBC-DP) were therefore prepared. Morphologies and surface chemistries of BCDP and MBC-DP were explored using FT-IR, Raman, SEM, EDX, TEM, and BET analyses. The obtained IR and Raman spectra confirmed the presence of magnetite on the surface of the MBC-DP. SEM results showed mesoporous surface for both adsorbents. BET analysis indicated higher amount of mesopores in MBC-DP. Box-Behnken (BB) design was utilized to optimize the treatment variables (pH, dose of the adsorbent (AD), concentration of TIGC [TIGC], and the contact time (CT)) and maximize the adsorptive power of both adsorbents. Higher % removal (%R), hitting 99.91%, was observed using MBC-DP compared to BCDP (77.31%). Maximum removal of TIGC (99.91%) was obtained using 120 mg/15 mL of MBC-DP for 10 min at pH 10. Equilibrium studies showed that Langmuir and Freundlich isotherms could best describe the adsorption of TIGC onto BCDP and MBC-DP, respectively, with a maximum adsorption capacity (qmax) of 57.14 mg/g using MBC-DP. Kinetics investigation showed that adsorption of TIGC onto both adsorbents could be best-fitted to a pseudo-second-order (PSO) model.

Dye removal from water and wastewater by nanosized metal oxides - modified activated carbon: a review on recent researches

The conventional water and wastewater treatment methods are unable to provide up-to-data organized standards for drinking water and discharging effluents into natural ecosystems. Therefore, developing advanced and cost-effective methods to achieve published standards for water and wastewater and population needs are nowadays necessity. The important parts of this article are providing literature information about dyes and their effects on the environment and human health, adsorption properties and mechanism, adsorbent characteristics, and recent information on various aspects of modified activated carbons with nanosized metal oxides (AC- NMOs) in the removal of dyes. This review also summarized the effect of main environmental and operational parameters such as adsorbent dosage, pH, initial dye concentration, contact time, and temperature on the dye adsorption using AC-NMOs. Furthermore, the applied isotherm and kinetic models have been discussed.

Coconut Shell Activated Carbon/CoFe2O4 Composite for the Removal of Rhodamine B from Aqueous Solution

Coconut shell activated carbon loaded with cobalt ferrite (CoFe2O4) composites (CAC/CoFe2O4) was synthesized via the single-step refluxing router method to manufacture adsorbents. The adsorbents were then applied to remove Rhodamine B (RhB) from aqueous environments via adsorption. The properties of coconut shell activated carbon (CAC) and CAC/CoFe2O4 were investigated through the usage of electron microscopic methods (SEM: Scanning Electron Microscopy, EDS: Energy Dispersive X-ray), powder X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). A series of batch experiments were implemented to evaluate the influences of various experimental parameters (initial pH, RhB concentration, contact time, and dosage of CAC/CoFe2O4) on the adsorption process. It was found that CoFe2O4 was successfully attached to activated carbon particles and had the suitable adsorption capacity for RhB at a molar ratio of 1 : 2:200 corresponding to the Co : Fe:CAC order. The removal efficiency and adsorption of RhB were optimal at a pH level of 4. The maximum adsorption capacity was 94.08 mg/g at an initial concentration of 350 mg/L and adsorbent dosage of 0.05 g/25 mL. Freundlich and Langmuir's models fitted well with the results obtained from the experimental data. The pseudo-second-order model also suited the most for RhB adsorption with the most remarkable correlation coefficient (R2 = 0.934). The adsorption process was controlled by a chemisorption mechanism through electrostatic attraction, hydrogen bonding interactions, and π-π interactions.

Application of Efficient Magnetic Particles and Activated Carbon for Dye Removal from Wastewater

Since the turn of the 21st century, water pollution has been a major issue, and most of the pollution is generated by dyes. Adsorption is one of the most commonly used dye-removal methods from aqueous solution. Magnetic-particle integration in the water-treatment industry is gaining considerable attention because of its outstanding physical and chemical properties. Magnetic-particle adsorption technology shows promising and effective outcomes for wastewater treatment owing to the presence of magnetic material in the adsorbents that can facilitate separation through the application of an external magnetic field. Meanwhile, the introduction of activated carbon (AC) derived from various materials into a magnetic material can lead to efficient organic-dye removal. Therefore, this combination can provide an economical, efficient, and environmentally friendly water-purification process. Although activated carbon from low-cost and abundant materials has considerable potential in the water-treatment industry, the widespread applications of adsorption technology are limited by adsorbent recovery and separation after treatment. This work specifically and comprehensively describes the use of a combination of a magnetic material and an activated carbon material for dye adsorption in wastewater treatment. The literature survey in this mini-review provides evidence of the potential use of these magnetic adsorbents, as well as their magnetic separation and recovery. Future directions and challenges of magnetic activated carbon in wastewater treatment are also discussed in this paper.

Fe3O4 nanoparticles loading on cow dung based activated carbon as an efficient catalyst for catalytic microbubble ozonation of biologically pretreated coal gasification wastewater

Cow dung based activated carbon was successfully modified by Fe₃O₄ nanoparticles as the novel catalyst (Fe₃O₄ nanoparticles@CDAC) to improve the microbubble ozonation treating biologically pretreated coal gasification wastewater (BPCGW). When the pH, ozone dosage, ozone bubble diameter and catalyst dosage of the ozonation were 7, 0.4 L/min, 5 μm and 3 g/L, the chemical oxygen demand (COD) removal efficiency reached 74% and the ratio of biochemical oxygen demand in five days/COD (BOD₅/COD) increased from 0.04 to 0.52, which were attributed to the electron transfer of Fe²⁺ and Fe³⁺ in Fe₃O₄ and enhanced hydroxyl radicals generation by the reaction of iron ions and ozone. Meanwhile, benzene derivatives, naphthalene and aromatic proteins were significantly removed while multiple chain hydrocarbons and their derivatives composed the main residual organic matters. The catalytic activity was slightly decreased even the catalyst has been reused for five times. Therefore, catalytic microbubble ozonation using Fe₃O₄ nanoparticles@CDAC represented excellent performance treating BPCGW and it is a promising process for wastewater advanced treatment.

Magnetic Solid-Phase Extraction Based on Poly 4-Vinyl Pyridine for HPLC-FLD Analysis of Naproxen in Urine Samples

A magnetic solid phase extraction technique followed by liquid chromatography with a fluorescence detector for naproxen analysis in human urine samples was developed. The method includes the extraction of naproxen with a magnetic solid synthetized with magnetite and poly 4-vinylpriridine, followed by the magnetic separation of the solid phase and desorption of the analyte with methanol. Under optimal conditions, the linear range of the calibration curve was 0.05–0.60 μg L⁻¹, with a limit of detection of 0.02 μg L⁻¹. In all cases values of repeatability were lower than 5.0% with recoveries of 99.4 ± 1.3%. Precision and accuracy values are adequate for naproxen (Npx) analysis in urine samples.

Thermally reduced graphene oxide as green and easily available adsorbent for Sunset yellow decontamination

The release of synthetic food dyes, like Sunset yellow, into industrial effluents can cause serious environmental and health problems. Due to its aromatic structure, it is recalcitrant towards degradation into non-toxic intermediates and its removal by efficient adsorption represents a cheap and efficient method. Herein we propose the use of thermally reduced graphene oxide (TRGO) as effective Sunset yellow dye adsorbent with an adsorption maximum capacity comparable with other sophisticated, chemically synthesized carbon-based nanomaterials. The reduced graphene oxide and the Sunset yellow adsorbed one were characterized by FT-IR, XPS and XRD spectroscopy, N₂ adsorption-desorption isotherm and TGA analysis. BET surface area reduced from 274.1 m²/g (for TRGO) to 39.9 m²/g (for TRGO-SY) showing that Sunset Yellow molecules occupied the corresponding active sites while the number of sheets resulted from the XRD spectra - from 3 to 8 in TRGO to 5 in TRGO-SY indicates the ordered intercalations in the graphene structure. The adsorption isotherm experimental data were better fitted with the Langmuir model than the Freundlich model, with the maximum adsorption capacity of the SY dye monolayer of 243.3 mg/g at pH = 6.0 and 189.0 mg/g from synthetic wastewater. The kinetic study revealed a perfect fit following the Pseudo-second order model with an equilibrium achieved within 30 min. The lack of adsorption on the starting graphene oxide is indicative for π-π interactions between the adsorbate and adsorbent.

Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review

The shortage of water resources and increasingly serious water pollution have driven the development of high-efficiency water treatment technology. Among a variety of technologies, adsorption is widely used in environmental remediation. As a class of typical adsorbents, metal oxides have been developed for a long time and continued to attract widespread attention, since they have unique physicochemical properties, including abundant surface active sites, high chemical stability, and adjustable shape and size. In this review, the basic principles of the adsorption process will be first elucidated, including affecting factors, evaluation index, adsorption mechanisms, and common kinetic and isotherm models. Then, the adsorption properties of several typical metal oxides, and key parameters affecting the adsorption performance such as particle/pore size, morphology, functionalization and modification, supports and calcination temperature will be discussed, as well as their application in the removal of various inorganic and organic contaminants. In addition, desorption and recycling of the spent adsorbent are summarized. Finally, the future development of metal oxide based adsorbents is also discussed.

Magnetic metal organic framework for pre-concentration of ampicillin from cow milk samples

The aim of this study is a present of a simple solvothermal synthesis approach to preparation of Cu-based magnetic metal organic framework (MMOF) and subsequently its application as sorbent for ultrasound assisted magnetic solid phase extraction (UAMSPE) of ampicillin (AMP) from cow milk samples prior to high performance liquid chromatography-Ultraviolet (HPLC-UV) determination. Characteristics of prepared MMOF were fully investigated by different techniques which showed the exclusive properties of proposed sorbent in terms of proper functionality, desirable magnetic property and also high specific surface area. Different influential factors on extraction recovery including sorbent dosage, ultrasonic time, washing solvent volume and eluent solvent volume were assessed using central composite design (CCD) based response surface methodology (RSM) as an operative and powerful optimization tool. This is the first report for determination of AMP using MMOF. The proposed method addressed some drawbacks of other methods and sorbents for determination of AMP. The presented method decreases the extraction time (4 min) and also enhances adsorption capacity (250 mg/g). Moreover, the magnetic property of presented sorbent (15 emu/g) accelerates the extraction process which does not need filtration, centrifuge and precipitation procedures. Under the optimized conditions, the proposed method is applicable for linear range of 1.0–5000.0 μg/L with detection limit of 0.29 μg/L, satisfactory recoveries (≥95.0%) and acceptable repeatability (RSD less than 4.0%). The present study indicates highly promising perspectives of MMOF for highly effective analysis of AMP in complicated matrices.

•

MMOF was prepared and used for the first time for determination of ampicillin from cow milk samples.

•

The extraction method was convenient, rapid and the MMOF can be used more than 8 times.

•

The MMOF have high specific surface area (300.0 m²/g) and high adsorption capacity (250.5 mg g⁻¹).

•

The separation time was only 5 min, which was much shorter than other reported.

Nano-engineered Adsorbent for the Removal of Dyes from Water: A Review

Background:

The huge quantity of wastewater, containing poisonous and hazardous dyes, is released by various industries which pollute water in direct and indirect ways. Most of the dyes are a dangerous class of water contaminants which have affected the environment drastically. Some dyes such as congo red, rhodamine B, methylene blue, methyl violet, and crystal violet are a serious threat to human beings.

Remediation Method:

Numerous methods are available for the removal of dyes from water. Adsorption, being a superior and eco-friendly technique, has advantage of eliminating organic dyes because of the availability of materials as adsorbents. The inexpensive nanomaterials are a more attractive choice for remediation of various dyes due to their unique properties and offer an adequate pathway to adsorb any organic dye from water to overcome its hazardous effects on human health.

Results:

In this review, we have discussed the latest literature related to various types of synthesis, characterization and uses as adsorbent for highly adsorptive removal capacity of nanoparticles for organic dyes.

Conclusion:

Adsorption technology provides an attractive pathway for further research and improvement in more efficient nanoparticles, with higher adsorption capacity, for numerous dyes to eliminate the dyes discharged from various industries and thus reduce the contamination of water. Therefore, nanocomposites may contribute to future prospective water treatment process.