Ultrasound-assisted advanced oxidation processes for water decontamination

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

Research progress of persulfate activation technology

Persulfate-based advanced oxidation processes (PS-AOPs) have been widely investigated by academia and industry due to their high efficiency and selectivity for the removal of trace organic pollutants from complex water substrates. PS-AOPs have been extensively studied for the degradation of pesticides, drugs, halogen compounds, dyes, and other pollutants. Utilizing bibliometric statistics, this review presents a comprehensive overview of persulfate-based advanced oxidation technology research over the past decade. The number of published articles about persulfate activation has steadily increased during this time, reflecting extensive international collaboration. Furthermore, this review introduces the most widely employed strategies for persulfate activation reported in the past 10 years, including carbon material activation, photocatalysis, transition metal activation, electrochemical activation, ultrasonic activation, thermal activation, and alkali activation. Next, the potential activation mechanisms and influencing factors, such as persulfate dosage during activation, are discussed. Finally, the application of PS-AOPs in wastewater treatment and in situ groundwater treatment is examined. This review summarizes the previously reported experiences of persulfate-based advanced oxidation technology and presents the current application status of PS-AOPs in organic pollution removal, with the aim of avoiding misunderstandings and providing a solid foundation for future research on the removal of organic pollutants.

Integrated physicochemical processes to tackle high-COD wastewater from pharmaceutical industry

Wastewater decontamination in pharmaceuticals is crucial to prevent environmental and health risks from API residues and other contaminants. Advanced oxidation processes (AOPs) combined with cavitational treatments offer effective solutions. Challenges include designing reactors on a large scale and monitoring the effectiveness and synergies of the hybrid technology. In the present work, pilot-scale treatment of a real high COD (485 g/L) pharmaceutical wastewater (PW) was investigated using hydrodynamic cavitation (HC) operated individually at 330 L/h or in combination with oxidants and electrical discharge (ED) with cold plasma (15 kV and 48 kHz). The first approach consisted of PW cavitational treatment alone of 7 L of 1:100 diluted PW at a HC-induced pressure of 60 bar and a flow rate of 330 L/h. However, this strategy did not provide satisfactory results for COD (∼15% less), and only when HC treatment was extended to more than 30 min in a recirculation mode, encouraging results were obtained (∼45% COD reduction). Consequently, a hybrid approach combining HC with ED-cold plasma was chosen to treat this high-COD PW. Aiming to establish an efficient flow-through hybrid process, after optimising all cavitation and electrical discharge parameters (45 bar HC pressure and 10 kHz ED frequency), the best COD abatement of ∼50 % was recorded with a 1:50 diluted PW. However, a subsequent adsorption step over activated carbon was required to achieve an almost quantitative COD reduction (95%+). Our integrated physicochemical process proved to be extremely efficient in treating high-COD industrial wastewater and resulted in a remarkable reduction of the COD value. In addition, the residual surfactants content in the PW were also drastically reduced (98%+) when a small amount of oxidants was added in the hybrid HC/ED treatment.

Recent developments on advanced oxidation processes for degradation of pollutants from wastewater with focus on antibiotics and organic dyes

The existence of various pollutants in water environment contributes to global pollution and poses significant threats to humans, wildlife, and other living beings. The emergence of an effective, realistic, cost-effective, and environmentally acceptable technique to treat wastewater generated from different sectors is critical for reducing pollutant accumulation in the environment. The electrochemical advanced oxidation method is a productive technology for treating hazardous effluents because of its potential benefits such as lack of secondary pollutant and high oxidation efficiency. Recent researches on advanced oxidation processes (AOPs) in the period of 2018-2022 are highlighted in this paper. This review emphasizes on recent advances in electro-oxidation (EO), ozone oxidation, sonolysis, radiation, electro-Fenton (EF), photolysis and photocatalysis targeted at treating pharmaceuticals, dyes and pesticides polluted effluents. In the first half of the review, the concept of the AOPs are discussed briefly. Later, the influence of increasing current density, pH, electrode, electrolyte and initial concentration of effluents on degradation are discussed. Lastly, previously reported designs of electrochemical reactors, as well as data on intermediates generated and energy consumption during the electro oxidation and Fenton processes are discussed. According to the literature study, the electro-oxidation technique is more appropriate for organic compounds, whilst the electro-Fenton technique appear to be more appropriate for more complex molecules.

Enhanced photocatalytic degradation of amoxicillin using a spinning disc photocatalytic reactor (SDPR) with a novel Fe3O4@void@CuO/ZnO yolk-shell thin film nanostructure

Antibiotics are resistant compounds with low biological degradation that generally cannot be removed by conventional wastewater treatment processes. The use of yolk-shell nanostructures in spinning disc photocatalytic reactor (SDPR) enhances the removal efficiency due to their high surface-to-volume ratio and increased interaction between catalyst particles and reactants. The purpose of this study is to investigate the SDPR equipped to Fe3O4@void@CuO/ZnO yolk-shell thin film nanostructure (FCZ YS) in the presence of visible light illumination in the photocatalytic degradation of amoxicillin (AMX) from aqueous solutions. Stober, co-precipitation, and self-transformation methods were used for the synthesis of FCZ YS thin film nanostructure and the physical and chemical characteristics of the catalyst were analyzed by XRD, VSM,, EDX, FESEM, TEM, AFM, BET, contact angle (CA), and DRS. Then, the effect of different parameters including pH (3-11), initial concentration of AMX (10-50 mg/L), flow rate (10-25 mL/s) and rotational speed (100-400 rpm) at different times in the photocatalytic degradation of AMX were studied. The obtained results indicated that the highest degradation efficiency of 97.6% and constant reaction rate of AMX were obtained under LED visible light illumination and optimal conditions of pH = 5, initial AMX concentration of 30 mg/L, solution flow rate of 15 mL/s, rotational speed of 300 rpm and illumination time of 80 min. The durability and reusability of the nanostructure were tested, that after 5 runs had a suitable degradation rate. Considering the appropriate efficiency of amoxicillin degradation by FCZ YS nanostructure, the use of Fe3O4@void@CuO/ZnO thin film in SDPR is suggested in water and wastewater treatment processes.

Current physical techniques for the degradation of aflatoxins in food and feed: Safety evaluation methods, degradation mechanisms and products

Aflatoxins are the most toxic natural mycotoxins discovered so far, posing a serious menace to the food safety and trading economy of the world, especially developing countries. How to effectively detoxify has persistently occupied a place on the list of "global hot-point" concerns. Among the developed detoxification methods, physical methods, as the authoritative techniques for aflatoxins degradation, could rapidly induce irreversible denaturation of aflatoxins. This review presents a brief overview of aflatoxins detection and degradation product structure identification methods. Four main safety evaluation methods for aflatoxins and degradation product toxicity assessment are highlighted combined with an update on research of aflatoxins decontamination in the last decade. Furthermore, the latest applications, degradation mechanisms and products of physical aflatoxin decontamination techniques including microwave heating, irradiation, pulsed light, cold plasma and ultrasound are discussed in detail. Regulatory issues related to "detoxification" are also explained. Finally, we put forward the challenges and future work in studying aflatoxin degradation based on the existing research. The purpose of supplying this information is to help researchers have a deeper understanding on the degradation of aflatoxins, break through the existing bottleneck, and further improve and innovate the detoxification methods of aflatoxins.

Piezodynamic Eradication of Both Gram-Positive and Gram-Negative Bacteria by Using a Nanoparticle Embedded Polymeric Membrane

Nowadays, bacterial infection is regarded as a serious threat to humankind, which needs to be taken care of. The emergence of antibiotic resistance and multidrug resistance (MDR) is rendering this situation more troublesome. However, several alternative treatment regimens have aided such diseases quite well in the recent past, among which dynamic antibacterial therapies combat this situation quite well. Among various dynamic therapies, piezodynamic therapy is a very recent avenue, in which mechanical stimuli have been exploited to treat bacterial infections. Herein, piezo-active bismuth ferrite-loaded poly(vinylidene fluoride-co-hexafluoropropylene) polymer has been utilized to eradicate gram-positive bacteria (E. faecalis) and gram-negative bacteria (E. coli). The sample has been designed in a free-standing membrane form, which, under soft ultrasound (~10 kHz), generates reactive radicals to ablate bacteria. Initially, the structure and morphology of the membrane have been substantiated by using X-ray diffraction and scanning electron microscopy methods; besides, Fourier transform infrared spectrum of the sample depicts a tremendously high value of polarizability and further confirms the piezo-activity of the membrane. More than 99% of E. coli and E. faecalis have been successfully eradicated within 30 min of ultrasound. Moreover, the solid-state structure and hydrophobic nature of the membrane help us to reuse it in a cyclic manner, which is possibly reported herein for the very first time. This novel membrane could be deployed in healthcare systems and pigment industries and could be exploited as a self-cleaning material.

Dopant-driven recombination delay and ROS enhancement in nanoporous Cd1-xCuxS heterogeneous photocatalyst for the degradation of DR-23 dye under visible light irradiation

Developing an efficient heterogeneous photocatalyst for environmental remediation and treatment strategies using visible light harvesting processes is promising but challenging. Herein, Cd1-xCuxS materials have been synthesized and characterized by precise analytical tools. Cd1-xCuxS materials exhibited excellent photocatalytic activity for direct Red 23 (DR-23) dye degradation in visible light irradiation. The operational parameters, like dopant concentration, photocatalyst dose, pH, and initial concentration of dye were investigated during the process. The photocatalytic degradation process follows pseudo-first-order kinetics. As compared to other tested materials, 5% Cu doped CdS material revealed superior photocatalytic performance for the degradation of DR-23 (k = 13.96 × 10-3 min-1). Transient absorption spectroscopy, EIS, PL, and transient photocurrent indicated that adding copper to the CdS matrix improved the separation of photo-generated charge carriers by lowering the recombination rate. Spin-trapping experiments recognized the photodegradation primarily based on secondary redox products, i.e., hydroxyl and superoxide radicals. According to by Mott-Schottky curves, photocatalytic mechanism and photo-generated charge carrier density were elucidated regarding dopant-induced valence and conduction bands shifting. Thermodynamic probability of radical formation in line with the altered redox potentials by Cu doping has been discussed in the mechanism. The identification of intermediates by mass spectrometry study also showed a plausible breakdown mechanism for DR-23. Moreover, samples treated with nanophotocatalyst displayed excellent results when tested for water quality metrics such as DO, TDS, BOD, and COD. Developed nanophotocatalyst shows high recyclability with superior heterogeneous nature. 5% Cu-doped CdS also exhibit strong photocatalytic activity for the degradation of colourless pollutant bisphenol A (BPA) under visible light (k = 8.45 × 10-3 min-1). The results of this study offer exciting opportunities to alter semiconductors' electronic band structures for visible-light-induced photocatalytic activity for wastewater treatment.

Bibliometric analysis and literature review of ultrasound-assisted degradation of organic pollutants

Ultrasound as a clean, efficient, and cheap technique gains special attention in wastewater treatment. Ultrasound alone or coupled with hybrid processes have been widely studied for the treatment of pollutants in wastewater. Thus, it is essential to conduct a review about the research development and trends on this emerging technique. This work presents a bibliometric analysis of the topic associated with multiple tools such as Bibliometrix package, CiteSpace, and VOSviewer. The literature sources from 2000 to 2021 were collected from Web of Science database, and the data of 1781 documents were selected for bibliometric analysis in respect to publication trends, subject categories, journals, authors, institutions, as well as countries. Detailed analysis of keywords in respect to co-occurrence network, keyword clusters, and citation bursts was conducted to reveal the research hotspot and future directions. The development of the topic can be divided into three stages, and the rapid development begins from 2014. The leading subject category is Chemistry Multidisciplinary, followed by Environmental Sciences, Engineering Chemical, Engineering Environmental, Chemistry Physical, and Acoustics, and there exists difference in the publications of different categories. Ultrasonics Sonochemistry is the most productive journal (14.75 %). China is the leading country (30.26 %), followed by Iran (15.67 %) and India (12.35 %). The top 3 authors are Parag Gogate, Oualid Hamdaoui, and Masoud Salavati-Niasari. There exists close cooperation between countries and researchers. Analysis of highly cited papers and keywords gives a better understanding of the topic. Ultrasound can be employed to assist various processes such as Fenton-like process, electrochemical process, and photocatalysis for degradation of emerging organic pollutants for wastewater treatment. Research topics in this field evolve from typical studies on ultrasonic assisted degradation to latest studies on hybrid processes including photocatalysis for pollutants degradation. Additionally, ultrasound-assisted synthesis of nanocomposite photocatalysts receives increasing attention. The potential research directions include sonochemistry in pollutant removal, hydrodynamic cavitation, ultrasound-assisted Fenton or persulfate processes, electrochemical oxidation, and photocatalytic process.

Synthesis of cerium oxide embedded perovskite type bismuth ferrite nanocomposites for sonophotocatalysis of aqueous micropollutant ibuprofen

Ibuprofen is potentially toxic and carcinogenic for freshwater ecosystems and poses a serious threat to human health by affecting kidney function. The present study focused on the sunlight-controlled degradation of ibuprofen from water using a novel magnetically separable cerium oxide-embedded bismuth ferrite heterostructure. Catalysts were synthesized by solvothermal and co-precipitation methods and characterized by X-ray diffractometry, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis optical absorption spectroscopy, and nitrogen adsorption. This study investigated the effect of photocatalysis, sonolysis, sonophotolysis, and sonophotocatalysis on the degradation of ibuprofen in water. Pseudo-first-order and second-order kinetics were applied to evaluate the rate of reaction for ibuprofen degradation. The addition of 5% CeO2 to the BiFeO3 significantly increased the surface area and pore volume of bismuth ferrite, which enhanced their photocatalytic degradation efficiency by 2.28 times in terms of ibuprofen mineralization. Sonolysis treatment alone and in combination with photolysis led to the degradation of ibuprofen, but with the formation of intermediate products. Positive synergy was observed when sonolysis was combined with photocatalysis in terms of the mineralization of ibuprofen and the degradation of intermediates along with their parent compound. It was proposed that, compared to photocatalytic mineralization, the ultrasound-assisted advanced oxidation process resulted in the conversion of ibuprofen to its mineralization products.

A detailed review on advanced oxidation process in treatment of wastewater: Mechanism, challenges and future outlook

The presence of several contaminants in waterbodies raises global pollution and creates major risks to mankind, wildlife, as well as other living organisms. Development of an effective, feasible, cost-effective and eco-friendly approach for treating wastewater that is discharged from various industries is important for bringing down the deposition of contaminants into environment. Advanced oxidation process is an efficient technique for treating wastewater owing to its advantages such as high oxidation efficacy and does not produce any secondary pollutants. Advanced oxidation process can be performed through various methods such as ozone, Fenton, electrochemical, photolysis, sonolysis, etc. These methods have been widely utilized for degradation of emerging pollutants that cannot be destroyed using conventional approaches. This review focuses on wastewater treatment using advanced oxidation process. A brief discussion on mechanism involved is provided. In addition, various types of advanced oxidation process and their mechanism are explained in detail. Challenges faced during wastewater treatment process using oxidation, electrochemical, Fenton, photocatalysis and sonolysis are discussed elaborately. Advanced oxidation process can be viewed as potential approach for treating wastewater with certain modifications and solving challenges.

Kinetic and Computational Study of Degradation of Two Azo Dyes, Metanil Yellow and Orange II, by Iron Oxide Nanoparticles Synthesized Using Hylocereus undatus

Wastewater treatment is an unavoidable necessity and requires immediate action with the aim of saving future generations from water crises and ensuring the sustainability of clean and drinkable water. In the present work, green synthesis of iron oxide nanoparticles (IONPs) was carried out from fruit extract of Hylocereus undatus to observe its photocatalytic activity towards two azo dyes, namely, Metanil yellow and Orange II dye. IONPs served as an efficient photocatalyst for the degradation of Metanil yellow dye, and the reaction followed pseudo-first-order kinetics. The effect of the initial dye concentration, amount of photocatalyst added, and effect of pH on photocatalytic degradation of Metanil yellow and Orange II dye using IONPs was studied. The results were compiled to reveal the most effective conditions for degradation to occur. A computational study of two dyes using DFT (Density Functional Theory) calculations were also performed to calculate thermodynamic properties such as the free energy, dipole moment, HOMO-LUMO energy gap, chemical potential, global hardness, softness, global electrophilicity index, ionization potential, electron affinity, etc. These parameters were used to describe the reactivity of dye toward the active photocatalytic species responsible for the degradation of dye. Natural population analysis was also performed, and Fukui indices were also calculated to explain the possible attacking sites of dyes by active photocatalytic species.

Challenges of TiO2 heterogeneous photocatalysis on cytostatic compounds degradation: state of the art

The following work provides a perspective on the degradation of cytostatic pollutants through TiO₂ heterogeneous photocatalysis. Cytostatic drugs are emerging pollutants used for cancer treatment found in hospital and domestic wastewater. Small amounts of cytostatic pollutants may pose severe health problems in human beings, animals, and plants after prolonged contact. This research presents a general review of some water treatment methods, such as aerobic activated sludge, enzymatic degradation, nanofiltration and chlorination, that have been used for the degradation or elimination of cytostatic drugs in wastewater. In recent years, photocatalysis has become important to solve this problem; these advanced oxidation process uses pure and modified TiO₂ to degrade cytostatic contaminants and convert them into non-harmful substances or to eliminate them completely. This work contains a comprehensive review of the heterogeneous photocatalysis process and mechanism, and its application on the removal of cytostatic pollutants. Even if research on the topic is still scarce, this literature review provides interesting highlights on the scope of the research field, and the path such research could follow.

Clay-Supported Metal Oxide Nanoparticles in Catalytic Advanced Oxidation Processes: A Review

Advanced oxidation processes (AOPs) utilizing heterogeneous catalysts have attracted great attention in the last decade. The use of solid catalysts, including metal and metal oxide nanoparticle support materials, exhibited better performance compared with the use of homogeneous catalysts, which is mainly related to their stability in hostile environments and recyclability and reusability. Various solid supports have been reported to enhance the performance of metal and metal oxide catalysts for AOPs; undoubtedly, the utilization of clay as a support is the priority under consideration and has received intensive interest. This review provides up-to-date progress on the synthesis, features, and future perspectives of clay-supported metal and metal oxide for AOPs. The methods and characteristics of metal and metal oxide incorporated into the clay structure are strongly influenced by various factors in the synthesis, including the kind of clay mineral. In addition, the benefits of nanomaterials from a green chemistry perspective are key aspects for their further considerations in various applications. Special emphasis is given to the basic schemes for clay modifications and role of clay supports for the enhanced mechanism of AOPs. The scaling-up issue is suggested for being studied to further applications at industrial scale.

Sonochemical synthesis of inorganic cryogel Ag2Mo3O10@Ag/AgO: structural characterization, antibacterial activity, and dye adsorption properties

An additive-free ultrasonic-assisted synthesis of a multi-layered Ag₂Mo₃O₁₀@Ag/AgO cryogel (SMSSO) nanocomposite has been developed, and a possible formation mechanism of multi-layered SMSSO was proposed based on characterization results of scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Raman spectroscopy, and diffuse reflection spectroscopy (DRS). The FE-SEM images demonstrated the formation process of the multi-layered SMSSO cryogel over time under sonication, starting with the growth of Ag₂Mo₃O₁₀ nanowires, and the formation of spherical nuclei which turn into an octahedron in the presence of excess silver ions. The antibacterial activity of the synthesized cryogel and its adsorption behavior for hazardous pollutant removal were explored. The results revealed that SMSSO exhibits excellent adsorption properties, with a maximum adsorption capacity of 277.77 mg g⁻¹ and removal of 99/95% for 150 mg L⁻¹ methylene blue (MB) by 0.005 g adsorbent doses at 60 °C and pH 9. It was also confirmed that the synthesized cryogels have good antibacterial activities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The selective adsorption capability of the cryogel toward cationic dye molecules and antibacterial activity makes it a competent candidate for water purification.

An ultrasonic-assisted synthesis of Ag₂Mo₃O₁₀@Ag/AgO cryogel (SMSSO) nanocomposite was developed, and a possible formation mechanism of multi-layered SMSSO was proposed based on characterization results of SEM, EDX, XRD, Raman spectroscopy, and DRS.

Oxidative decomposition and mineralization of caffeine by advanced oxidation processes: The effect of hybridization

The study consists of a detailed investigation of the degradability of the emerging water contaminant-caffeine by homogeneous and heterogeneous Advanced Oxidation Processes (AOP's), estimation of a synergy index for each hybrid operation thereof, and proposing the most plausible reaction mechanisms that are consistent with the experimental data. It also encompasses evaluation of the effect of the water matrix represented by carbonate species and humic acids, as strong scavengers of hydroxyl radicals. The results showed that single AOP's such as sonolysis (577 kHz) and photolysis with H2O2 provided complete caffeine elimination, but they were insufficient for the mineralization of the compound. Hybrid AOP's were considerably more effective, particularly when operated at a heterogeneous mode using commercial TiO2. The most effective hybrid process was UV-H2O2/TiO2, which provided more than 75% TOC decay at the minimum test doses of the reagent and catalyst. While the addition of ultrasound to the process significantly increased the rate of caffeine decomposition, it reduced the overall degradation of the compound to 64% in terms of TOC decay. The antagonistic effect was attributed to the formation of excess H2O2, and the presence of cavity clouds and/or high density layers that inhibited the transmission of UV light. The effect of natural water ingredients was found to reduce the reaction rates, signifying the major contribution of hydroxyl radicals to the destruction of caffeine. The proposed reaction mechanisms based on OH radical attack and the calculated energy barriers were in good agreement with the experimentally detected reaction byproducts.

A review on pharmaceuticals removal from waters by single and combined biological, membrane filtration and ultrasound systems

Contaminants of emerging concern (CEC) such as pharmaceuticals commonly found in urban and industrial wastewater are a potential threat to human health and have negative environmental impact. Most wastewater treatment plants cannot efficiently remove these compounds and therefore, many pharmaceuticals end up in aquatic ecosystems, inducing problems such as toxicity and antibiotic-resistance. This review reports the extent of pharmaceutical removal by individual processes such as bioreactors, advanced oxidation processes and membrane filtration systems, all of which are not 100% efficient and can lead to the direct discharge of pharmaceuticals into water bodies. Also, the importance of understanding biotransformation of pharmaceutical compounds during biological and ultrasound treatment, and its impact on treatment efficacy will be reviewed. Different combinations of the processes above, either as an integrated configuration or in series, will be discussed in terms of their degradation efficiency and scale-up capabilities. The trace quantities of pharmaceutical compounds in wastewater and scale-up issues of ultrasound highlight the importance of membrane filtration as a concentration and volume reduction treatment step for wastewater, which could subsequently be treated by ultrasound.

Efficient Rice-Husk-Derived Silica Nanocatalysts for Organic Dye Removal from Water

Rice is the second most extensively consumed food ingredient, and its by-products in the paddy field include rice husk and straw. Rice husk ash, resulting from rice husk burning, is considered an environment menace, inducing negative effects on the area in which it is disposed of. In this study, rice husk was applied as a silicate source to obtain mesoporous silica material. Characterization techniques confirmed the well-ordered mesophase and resemblance of mesoporous silica resulting from rice husk ash with one obtained from conventional silica sources. The mesoporous silica material was further used as catalyst support. The resulting catalysts were used for rhodamine 110 oxidation, proving high potential for oxidizing hazardous organic compounds, such as dyes from water, resulting in environmentally harmless products.

Comparative overview of advanced oxidation processes and biological approaches for the removal pharmaceuticals

Nowadays, pharmaceuticals are the center of significant environmental research due to their complex and highly stable bioactivity, increasing concentration in the water streams and high persistence in aquatic environments. Conventional wastewater treatment techniques are generally inadequate to remove these pollutants. Aiming to tackle this issue effectively, various methods have been developed and investigated on the light of chemical, physical and biological procedures. Increasing attention has recently been paid to the advanced oxidation processes (AOPs) as efficient methods for the complete mineralization of pharmaceuticals. Their high operating costs compared to other processes, however, remain a challenge. Hence, this review summarizes the current and state of art related to AOPs, biological treatment and their effective exploitation for the degradation of various pharmaceuticals and other emerging molecules present in wastewater. The review covers the last decade with a particular focus on the previous five years. It is further envisioned that this review of advanced oxidation methods and biological treatments, discussed herein, will help readers to better understand the mechanisms and limitations of these methods for the removal of pharmaceuticals from the environment. In addition, we compared AOPs and biological treatments for the disposal of pharmaceuticals from the point of view of cost, effectiveness, and popularity of their use. The exploitation of coupling AOPs and biological procedures for the degradation of pharmaceuticals in wastewater was also presented. It is worthy of note that an integrated AOPs/biological system is essential to reach the complete degradation of pharmaceuticals; other advantages of this hybrid technique involve low energy cost, an efficient degradation process and generation of non-toxic by-products.

Extraction of natural products using supercritical fluids and pressurized liquids assisted by ultrasound: Current status and trends

Natural products are a source of a wide range of chemical compounds, from pigments to bioactive compounds, which can be extracted and used in different applications. Due to consumer awareness, the interest in natural compounds significantly increased in the last decades, prompting the search for more efficient and environmentally friendly extraction techniques and methods. Pressurized liquids and fluids (sub and supercritical) are being explored to extract natural compounds within the green process concept. The combination of these techniques with ultrasound has emerged as an alternative to intensify the extraction process efficiently. In this context, this work presents a comprehensive review and current insights into the use of high-pressure systems, specifically supercritical fluid extraction and pressurized liquid extraction assisted by ultrasound, as emerging technologies for extracting bioactive compounds from natural products. The extraction mechanisms, applications, and the influence of operational parameters in the process are addressed, in addition to an analysis of the main challenges to be overcome for widespread application.

Sonochemical degradation of neonicotinoid pesticides in natural surface waters. Influence of operational and environmental conditions

Neonicotinoids sonochemical oxidation at high-frequency ultrasound (MHz range) has been carried out in ultrapure and natural surface-water matrices (river, reservoir and wastewater treatment plant effluent). To evaluate the influence of the operating variables, that is initial pollutant concentration, ultrasound frequency, ultrasound power, and pulse-stop time a Box-Behnken experimental design was planned. Optimal results were obtained using a frequency of 578 kHz, a power of 40 W L^-1, with a pollutant concentration of 1 μM (for each pesticide), and using a pulse-stop time of 100 ms. The experimental data adjustment using the Langmuir-Hinshelwood heterogeneous kinetic model showed that neonicotinoids oxidation was carried out in the bubble-liquid interface by the attack of hydroxyl radicals. Experiments performed in the presence of radical scavengers, that is, methanol, ethanol and tert-butyl alcohol corroborated this reaction mechanism. The influence of some environmental conditions such as pH, presence of soluble inorganic species (Cl^-, SO₄^2-, NO₃^-, HPO₄^2-, HCO₃^-) and soluble organic species (humic acids content) were established. Finally, the aqueous matrix's influence was investigated for three natural surface water cases, and the results were rationalized according to the main water physicochemical characteristics.

Electro-Fenton assisted sonication for removal of ammoniacal nitrogen and organic matter from dye intermediate industrial wastewater

The intricacy in the treatment of effluents from the textile sector attracts the researchers since 20th century. Dye intermediate manufacturing industries are responsible for producing the toxic pollutants such as nitro-aromatics, benzene, toluene, phenol, heavy metals etc. with intense colour. The present study focuses on the performance of combined Electro-Fenton (EF) and sonication for the removal of ammoniacal nitrogen and COD from dye intermediate manufacturing wastewater. Batch experiments of EF were performed using graphite electrodes and sonication was applied to the EF treated wastewater to enhance the treatment performance. A number of experiments were executed to discover the influence of pH, applied voltage, Fenton catalyst dosage and time of electrolysis on the removal efficiency of EF batch process was scrutinized. The pH was varied between 2 and 4, applied voltage from 1 to 4V, Fenton catalyst dosage between 50 and 200 mg L^-1 and time between 15 and 180 min. At optimum condition i.e. pH 3, applied voltage 3V, Fenton catalyst dosage of 100 mg L^-1and 120 min electrolysis time, the percentage removal obtained for ammoniacal nitrogen and COD were 59.4% and 79.2% respectively. The removal efficiency was increased to 65.5% for ammoniacal nitrogen and 85.4% for COD after applying sonication to the EF treated wastewater. The removal of ammoniacal nitrogen and COD can be achieved in a scientific and feasible way by combining EF process with sonication.

A Review on Additives-assisted Ultrasound for Organic Pollutants Degradation

In the past 2 decades, considerable attentions have been paid to the sonochemical advanced oxidation processes (SAOPs) in the fields of pollutants removal. SAOPs are powerful methods for refractory pollutants degradation due to the free radicals (e.g., •OH and •H) generated by water pyrolysis and extremely high temperature and pressure in and around cavitation bubbles. Reports on various additives for the improvement of sonochemical pollutants degradation including oxidants, inorganic anions, etc. have been made. This paper presents a comprehensive review on the ultrasound (US) alone and sono-hybrid systems for various pollutants degradation. In this paper, the degradation efficiency of various pollutants in sono-hybrid systems are elucidated in detail, and particular emphasis is placed on the reaction mechanism of additives in US for the enhancement of pollutants degradation. The problems on the applications of the current sono-hybrid systems are identified and discussed, and the outlooks for further in-depth studies on the challenges and some research needs for the applications of SAOPs for the removal of organic pollutants from aquatic systems are made at the end.

Optimization and characterization of zeolite-titanate for ibuprofen elimination by sonication/hydrogen peroxide/ultraviolet activity

In this study, a photo-catalyst of titanium oxide was coated on zeolite by the sol-gel method. The generation of the zeolite-titanate photo-catalyst was optimized at conditions of calcination temperature (300, 350, 400 and 500 °C), calcination time (1, 2, 3, and 4 h), and titanate content (0, 2, 4, 6, and 8 mL). The catalyst was used for 'Sonication/UV/H₂O₂″ activity and finally, eliminating ibuprofen. Physicochemical properties of the as-built photo-catalysts for all optimized conditions were determined using FESEM-EDX-mapping, BET, FTIR, and XRD. The highest percentage of ibuprofen removal (98.9%) was obtained at conditions of zeolite to titanium ratio of 1 g: 2 mL, time in the furnace of 1 h, and temperature of the furnace of 350 °C. The optimum photo-catalytic (namely, Cat-350-1-2) had a surface area value of 39 m²/g and a crystalline size of 4.9 nm. The surface area for all photo-catalysts increased after being used for ibuprofen removal, possibly due to ultrasonic waves. The presence of Ti-O, benzene ring, O-Al-O, O-Si-O, C-H, and O-H in the photo-catalysts structure were confirmed. Growing the calcination time resulted in an increase in the crystallinity of titanium dioxide in the photo-catalysts and, ultimately a reduction in the ibuprofen removal. The consumed energy by the developed system was calculated for the presence (0.094 kJ/g) and absence (17.5 kJ/g) of the ultrasonic wave. The degradation pathway and reaction kinetic are also explored and proposed. The results showed that the ultrasonic-UV-activated H₂O₂-based technique can be applied as an alternative method for ibuprofen removal from aqueous media.

Dual-frequency ultrasound: Strengths and shortcomings to water treatment and disinfection

Since the early 2000s, dual-frequency ultrasound (DFUS) has received much attention for synergistically enhanced elimination of organic pollutants and pathogenic microorganisms from water. In the present review, we have surveyed recent developments in acoustic physics to elucidate the mechanism of synergistic effect under exposure of aqueous media to DFUS. Briefly, the nonlinear dynamics of microbubbles upon DFUS exposure produces additional frequencies, such as harmonics, subharmonics, ultraharmonics and combination frequencies. These increase the probability of bubbles collapse, thereby enhancing cavitation and generating more reactive oxygen species (ROS) for advanced oxidation processes (AOPs). Further, literature data on ROS generation, chemical degradation and microbial inactivation in aqueous media through DFUS alone and DFUS-based AOPs (involving oxidants or catalysts) have been discussed. In this regard, optimal frequency combination, sonoreactor type and transducer arrangement appear to be key parameters for achieving a high synergistic effect. Strengths and shortcomings of DFUS to water treatment and disinfection have been identified and future research directions have been proposed. Though most studies were conducted on pure (matrix-free) aqueous solutions, these AOPs could be applicable for treating real waters.

Design a new photocatalyst of sea sediment/titanate to remove cephalexin antibiotic from aqueous media in the presence of sonication/ultraviolet/hydrogen peroxide: Pathway and mechanism for degradation

The aim of the current study was directed to develop a new sea sediment/titanate photocatalyst to remove cephalexin from aqueous media in the presence of ultraviolet (UV) light, hydrogen peroxide (H₂O₂), and ultrasonic waves. The influence of furnace temperature (300, 350, 400, and 500 °C), furnace residence time (1, 2, 3, and 4 h), and ratio of sea sediment: titanium (0-6 v: w) on the physicochemical properties and the cephalexin removal by the sea sediment/titanate photocatalyst was explored. The technique of FTIR, SEM/EDX, XRD, BET, BJH, and Mapping was used to determine the physicochemical properties of the generated photocatalyst. The maximum cephalexin removal (94.71%) was obtained at the furnace temperature of 500 °C, the furnace residence time of 2 h, and the sea sediment: titanium ratio of 1:6 (=12 mL TiO₂/2 g sea sediment). According to the acquired results, the surface area of the optimized catalyst, namely Cat-500-2-12, was computed to be 52.29 m²/g. The crystallite size of titanium oxide on the optimum photocatalyst was calculated ~17.68 nm. The FTIR test confirmed the presence of C=C, O-H, C=O, C-S, and C-H functional groups in the photocatalyst. The transformation pathway for the degradation of cephalexin by the developed system was drawn. The present investigation showed that the developed technique (sea sediment/titanate-UV-H₂O₂-ultrasonic) could be used as a promising alternative for attenuating cephalexin from aqueous solutions.

Reaction kinetics of sonochemical oxidation of potassium hexacyanoferrate(II) in aqueous solutions

We studied sonochemical reactions resulting from ultrasonic treatment of potassium hexacyanoferrate(II) in aqueous solutions using a custom-built apparatus working at 536 kHz. We concluded that primary reactions are completely dominated by oxidation of Fe(II) to Fe(III) and did not find any evidences for degradation of cyanide. At the highest concentration used in the present study (0.1 M) we detected formation of pentacyanoaquaferrate(II) complex, which is most probably formed in reactions between hexacyanoferrate(III) anions and hydrogen atoms or hydrated electrons formed in sonochemical processes. We also determined that hydroxyl radicals formation rate in our system, (8.7 ± 1.5)∙10^-8 M∙s^-1, is relatively high compared to other reported experiments. We attribute this to focusing of the ultrasonic wave in the sample vessel. Finally, we suggest that oxidation rate of hexacyanoferrate(II) anions can be a convenient benchmark of efficiency of sonochemical reactors.

Use of Ultrasound as an Advanced Oxidation Process for the Degradation of Emerging Pollutants in Water

Emerging pollutants are compounds of increased environmental importance and, as such there is interest among researchers in the evaluation of their presence, continuity and elimination in different environmental matrices. The present work reviews the available scientific data on the degradation of emerging pollutants, mainly pharmaceuticals, through ultrasound, as an advanced oxidation process (AOP). This study analyzes the influence of several parameters, such as the nature of the pollutant, the ultrasonic frequency, the electrical power, the pH, the constituents of the matrix and the temperature of the solution on the efficiency of this AOP through researches previously reported in the literature. Additionally, it informs on the application of the referred process alone and/or in combination with other AOPs focusing on the treatment of domestic and industrial wastewaters containing emerging pollutants, mainly pharmaceuticals, as well as on the economic costs associated with and the future perspectives that make ultrasound a possible candidate to solve the problem of water pollution by these emerging pollutants..

Review on low- and high-frequency sonolytic, sonophotolytic and sonophotochemical processes for inactivating pathogenic microorganisms in aqueous media

Ultraviolet and ultrasound-based advanced oxidation processes (AOPs) are gaining considerable research attention for water treatment and disinfection. Compared to low-frequency ultrasound (LFUS, <100 kHz), high-frequency ultrasound (HFUS, >100 kHz and MHz range) for water disinfection remains much less investigated. The present review aims at surveying and discussing literature data on microbial inactivation in non-food aqueous media using HFUS alone and with AOPs. More specifically, the review covers sonophotolytic (US/UV) processes under sequential and simultaneous modes as well as sonophotochemical processes, where both low and high frequencies were applied. Addressing a state-of-the-art biomedical research, we have attempted to provide more insight into mechanical and sonochemical mechanisms of inactivation under ultrasonic exposure. Sonoporation, intracellular generation of reactive oxygen species (ROS), energy stimulation of aquaporins to deliver ROS, and injection of extracellular ROS into sonoporated cells have all been identified as primary ways of inactivation. Application of ultrasound in the 0.2-2 MHz range and mercury-free light sources to support the Minamata Convention on Mercury is an ongoing challenge for effective elimination of microbial pathogens from water and wastewater through sonophotolytic and sonophotochemical AOPs.

Sonolytic degradation of bisphenol S: Effect of dissolved oxygen and peroxydisulfate, oxidation products and acute toxicity

In this paper, the kinetics of bisphenol S (BPS) degradation in the presence of peroxydisulfate (PDS) or dissolved oxygen (DO) in ultrasound (US) system were investigated. For PDS (US/PDS), increased PDS concentration result in faster BPS degradation, but the enhancement was not remarkable with multiplying PDS dosages. Therefore, heterogeneous PDS activation model based on a Langmuir-type adsorption mechanism was proposed to explain the trait of BPS abatement. The equilibrium constant of PDS (K_PDS) was calculated to be 2.91 × 10^-4/μM, which was much lower than that of BPS, suggesting that PDS was hard to adsorb on the gas-liquid interface of the cavitation bubble following by activation. Besides, the formation of •OH and SO₄^•- in US/PDS system was reinvestigated. The result showed that SO₄^•- rather than •OH was the predominant radical, which was quite different from previous study. Dissolved oxygen largely improve the degradation of BPS in US system and •OH rather than O₂^•- was proved to be the main reactive oxygen species (ROS). The improvement of •OH generation possibly caused by the reaction of DO with •H so that it cannot recombine with •OH. The transformation of the BPS in US system mainly included BPS radical polymerization, hydroxylation and hydrolysis. Frustratingly, the acute toxicity assay of Vibrio fischeri suggests that the degradation products of BPS are more toxic. These results will improve the understanding on the activation mechanisms of PDS and the role of dissolved oxygen play in US. Further investigations may need to explore other treatment ways of BPS and evaluate the acute toxicity of degradation products.

Hydroxyl radical-mediated degradation of salicylic acid and methyl paraben: an experimental and computational approach to assess the reaction mechanisms

Advanced oxidation processes (AOPs) using various energy sources and oxidants to produce reactive oxygen species are widely used for the destruction of recalcitrant water contaminants. The current study is about the degradation of two emerging pollutants-salicylic acid (SA) and methyl paraben (MP)-by high-frequency ultrasonication followed by identification of the oxidation byproducts and modeling of the reaction mechanisms using the density functional theory (DFT). The study also encompasses prediction of the aquatic toxicity and potential risk of the identified byproducts to some aquatic organisms bussing the ECOSAR (Ecological Structure Activity Relationships) protocol. It was found that the degradation of both compounds was governed by •OH attack and the pathways consisted of a cascade of reactions. The rate determining steps were decarboxylation (~ 60 kcal mol^-1) and bond breakage reactions (~ 80 kcal mol^-1), which were triggered by the stability of the reaction byproducts and overcome by the applied reaction conditions. Estimated values of the acute toxicities showed that only few of the byproducts were harmful to aquatic organisms, implying the environmental friendliness of the experimental method.

Heterogeneous Oxidation of Phenolic Compounds with Photosensitizing Catalysts Incorporated into Chitosan

The increasing amount of hazardous micropollutants in the aqueous environment has recently become a concern, especially because they are not usually included in environmental monitoring programs. There is also limited knowledge regarding their behavior in the environment and their toxicity. This paper presents results regarding the heterogeneous photosensitized oxidation of 10 phenolic compounds under visible light. All of the selected compounds are classified as pollutants of emerging concern. For the first time, the application of photosensitizing catalysts incorporated into a chitosan carrier was investigated from several points of view, namely, structure characterization, singlet oxygen generation potential, photodegradation ability, biodegradability, and toxicity assessment. It was found that compounds of different origins were degraded with high effectivity. Photoactive chitosan was stable and could be reused for at least 12 cycles without losing its photocatalytic activity. The Hammett constants for all of the degraded compounds were determined. Improved biodegradability after the treatment was achieved for almost all compounds, apart from 4-hydroxybenzoic acid, and only slightly for 2-phenylphenol. The acute toxicity was assessed using bioluminescent Vibrio fischeri bacteria, indicating lower toxicity than the parent compounds.

Structures of Reaction Products and Degradation Pathways of Aflatoxin B1 by Ultrasound Treatment

Ultrasound is an emerging decontamination technology with potential use in the global food processing industry. In the present study, we explored power ultrasound for processing aqueous aflatoxin B₁ (AFB₁). AFB₁ was degraded by 85.1% after 80 min of ultrasound exposure. The reaction products of AFB₁ were identified and their molecular formulae elucidated by ultra-high-performance liquid chromatography Q-Orbitrap mass spectrometry. Eight main reaction products were found, and their structures were clarified by parental ion fragmentation. Two degradation pathways were proposed according to the degradation product structures: One involved the addition of H• and OH• radicals, whereas the other involved H₂O₂ epoxidation and H•, OH•, and H₂O₂ oxidation of AFB₁. Ultrasound treatment significantly reduced AFB₁ bioactivity and toxicity by disrupting the C8=C9 double bond in the furan ring and modifying the lactone ring and methoxy group.

Ultrasound-Enhanced Catalytic Ozonation Oxidation of Ammonia in Aqueous Solution

Excessive ammonia is a common pollutant in the wastewater, which can cause eutrophication, poison aquatic life, reduce water quality and even threaten human health. Ammonia in aqueous solution was converted using various systems, i.e., ozonation (O₃), ultrasound (US), catalyst (SrO-Al₂O₃), ultrasonic ozonation (US/O₃), ultrasound-enhanced SrO-Al₂O₃ (SrO-Al₂O₃/US), SrO-Al₂O₃ ozonation (SrO-Al₂O₃/O₃) and ultrasound-enhanced SrO-Al₂O₃ ozonation (SrO-Al₂O₃/US/O₃) under the same experimental conditions. The results indicated that the combined SrO-Al₂O₃/US/O₃ process achieved the highest NH₄⁺ conversion rate due to the synergistic effect between US, SrO-Al₂O₃ and O₃. Additionally, the effect of different operational parameters on ammonia oxidation in SrO-Al₂O₃/O₃ and SrO-Al₂O₃/US/O₃ systems was evaluated. It was found that the ammonia conversion increased with the increase of pH value in both systems. The NH₃(aq) is oxidized by both O₃ and ·OH at high pH, whereas the NH₄⁺ oxidation is only carried out through ·OH at low pH. Compared with the SrO-Al₂O₃/O₃ system, the ammonia conversion was significantly increased, the reaction time was shortened, and the consumption of catalyst dosage and ozone were reduced in the SrO-Al₂O₃/US/O₃ system. Moreover, reasonable control of ultrasonic power and duty cycle can further improve the ammonia conversion rate. Under the optimal conditions, the ammonia conversion and gaseous nitrogen yield reached 83.2% and 51.8%, respectively. The presence of tert-butanol, CO₃²⁻, HCO₃⁻, and SO₄²⁻ inhibited the ammonia oxidation in the SrO-Al₂O₃/US/O₃ system. During ammonia conversion, SrO-Al₂O₃ catalyst not only has a certain adsorption effect on NH₄⁺ but accelerates the O₃ decomposition to ·OH.

Extraction of bioactive compounds from pomegranate peel (Punica granatum L.) with pressurized liquids assisted by ultrasound combined with an expansion gas

In this study it is proposed the introduction of an expansion gas in high pressure water to maximize the cavitation caused by the application of ultrasound to improve the extraction of phenolic compounds from pomegranate peel. Different combinations of ultrasound power (US-Pwr), expansion gas initial pressure (N₂-Pi), system pressure (SP) and particle size of sample were evaluated using water as solvent. The use of US-Pwr and N₂-Pi individually or combined improved the extraction process proving higher yields. SP was an important parameter affecting extraction yield, showing an inverse relation between its increase and extraction yield. Although higher yields were produced with samples with smaller particles, the combination of ultrasound and expansion gas had a positive effect on the process independently of particle size, promoting an increase of 20-26% in yield. These results suggest an enormous potential to be explored with the introduction of an expansion gas in pressurized liquids in processes assisted by ultrasound for the extraction of phenolic compounds from natural products using green solvents.

An ultrasound-assisted photocatalytic treatment to remove an herbicidal pollutant from wastewaters

Pollutants of emerging concern contaminate surface and ground water. Advanced oxidation processes treat these molecules and degrade them into smaller compounds or mineralization products. However, little information on coupled advanced oxidation techniques and on the degradation pathways of these pollutants is available to identify possible ecotoxic subproducts. In the present work, we investigate the ultrasound assisted photocatalytic degradation pathway of the herbicide Isoproturon. We worked in batch mode in a thermostatic glass reactor. We compared the activity of nanometric TiO₂ P25 with that of Kronos 1077, a micrometric TiO₂. We discuss the individual, additive and synergistic degradation action of photolysis, sonolysis, sonophotolysis, and sonophotocatalysis by varying catalyst loading and/or ultrasound power for the last three techniques. With 0.1 g L^-1 catalyst, photocatalysis and sonophotopcatalysis completely degrade Isoproturon within 240 min and 60 min, respectively (>99% conversion). Sonophotocatalysis breaks Isoproturon down into smaller molecules than photocatalysis alone.

Enhanced methane production from waste activated sludge by combining calcium peroxide with ultrasonic: Performance, mechanism, and implication

This study reported a novel and high-efficient pretreatment method for anaerobic digestion, i.e., combining calcium peroxide (CaO₂) with ultrasonic (US), by which not only the methane production was remarkably improved but also the removal of refractory organic contaminants was enhanced. Experimental results showed the optimum condition for methane production was achieved at 0.1 g CaO₂/g VSS combined with US (1 W/ml, 10 min). Under this condition, the maximal methane yield of 211.90 ± 2.6 L CH₄/kg VSS was obtained after 36 d of anaerobic digestion, which was respectively 1.36-fold, 1.19-fold and 1.26-fold of that from the control, solo US (1 W/ml, 10 min) and solo CaO₂ (0.1 g/g VSS). Mechanism investigations revealed that CaO₂ + US not only improved the disintegration of waste activated sludge (WAS) but also increased the proportion of biodegradable organic matters. Moreover, the total frequency of recalcitrant contaminants contained in WAS decreased significantly when CaO₂ + US was applied.