PMS activation using reduced graphene oxide under sonication: Efficient metal-free catalytic system for the degradation of rhodamine B, bisphenol A, and tetracycline

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

Reductive dechlorination of 2,4-dichlorophenol by using MWCNTs-Pd/Fe nanocomposites prepared in the presence of ultrasonic irradiation

The research on developing a purification technology for 2,4-dichlorophenol (2,4-DCP) polluted water with high efficiency and the low energy consumption is crucial for achieving several Sustainable Development Goals (SDGs). In order to achieve these goals, MWCNTs-Pd/Fe nanocomposites were prepared by Fe nanoparticles modified with multi-walled carbon nanotubes (MWCNTs) and palladium (Pd) in the presence of ultrasonic irradiation. The MWCNTs-Pd/Fe nanocomposites were characterized by using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-Ray Diffraction (XRD), and others. Characterization results confirmed that the MWCNTs-Pd/Fe was successfully prepared, with the particle size of 80 nm and the specific surface area of 89.5 m2/g confirmed. We studied the reductive dechlorination of 2,4-Dichlorophenol (2,4-DCP) by MWCNTs-Pd/Fe nanocomposites under different conditions, and the optimized experimental results were found when the Pd loading was 0.4 %, the pH was 3, and the temperature was 30 °C. The phenol yield increased from 76.5 % (without ultrasonic irradiation) to 92.3 % (with ultrasonic irradiation) in 300 min and the 2,4-DCP removal rate reached 98.7 % under the optimal conditions. Therefore, ultrasonic irradiation enhanced the performance of MWCNTs-Pd/Fe nanocomposites for 2,4-DCP removal. We also established the degradation mechanism of chlorophenol by analyzing the intermediates, and proposed the degradation kinetics model. The degradation of 2,4-DCP followed the pseudo-first-order kinetics with the rate constant of 0.05988 min-1. Also, this study demonstrated the potential of using ultrasonic irradiation to improve the properties and recovery of MWCNTs-Pd/Fe nanocomposites, contributing to achievement of the Sustainable Development Goals (SDGs), including SDG-3, SDG-6.

Unraveling kinetic and synergistic effects during ultrasound-enhanced carbocatalysis for water remediation as a function of ultrasonic frequency

The ability of the ultrasound (US) combined with peroxymonosulfate (PMS), and a carbonaceous material (BC) was evaluated in the degradation of a model pollutant (acetaminophen, ACE). The US/BC/PMS system was compared with other possible systems (US, oxidation by PMS, BC adsorption, BC/PMS, US/PMS, and US/BC. The effect of the ultrasonic frequency (40, 375, and 1135 kHz) on the kinetics and synergy of the ACE removal was evaluated. In the US system, kinetics was favored at 375 kHz due to the increased production of hydroxyl radicals (HO•), but this did not improve in the US/PMS and US/BC systems. However, synergistic and antagonistic effects were observed at the low and high frequencies where the production of radicals is less efficient but there is an activation of PMS through mechanical effects. US/BC/PMS at 40 kHz was the most efficient system obtaining ∼95% ACE removal (40 μM) in the first 10 min of treatment, and high synergy (S = 10.30). This was promoted by disaggregation of the carbonaceous material, increasing the availability of catalytic sites where PMS is activated. The coexistence of free-radical and non-radical pathways was analyzed. Singlet oxygen (1O2) played the dominant role in degradation, while HO• and sulfate radicals (SO4•-), scarcely generated at low frequency, play a minimum role. Performance in hospital wastewater (HWW), urine, and seawater (SW) evidenced the competition of organic matter by BC active sites and reactive species and the removal enhancement when Cl- is present. Besides, toxicity decreased by ∼20% after treatment, being the system effective after three cycles of reuse.

Nano spinel NiAl2O4: structure, optical and photocatalytic performance evaluation and optimization

Four kinds of spinel NiAl2O4were synthesized by the polyacrylamide gel method using Al2(SO4)3·18H2O and Al(NO3)3·9H2O as aluminum salts and anhydrous NiSO4and NiSO4·6H2O as nickel salts. The effects of different aluminum salts and nickel salts on the structure, optical and photocatalytic activity of spinel NiAl2O4were confirmed by various characterizations. There is no NiO impurity in the spinel NiAl2O4synthesized with Al2(SO4)3·18H2O as aluminum salt, while NiAl2O4, NiO and C-O functional group coexist in the target product with Al(NO3)3·9H2O as aluminum salt, and C-O functional group and NiO inhibits the photocatalytic activity of the system. Based on photocatalytic experiment, response surface methodology and free radical verification experiment, the influence of experimental parameters including synthesis pathway, initial drug concentration, initialpHand catalyst content on the photocatalytic activity of spinel NiAl2O4and the main active species involved in the reaction were investigated. The degradation percentage of spinel NiAl2O4synthesized with Al2(SO4)3·18H2O as aluminum salt and NiSO4·6H2O as nickel salt was 86.3% at the initial concentration of 50 mg l-1,pH= 5.33 and catalyst content of 1 g l-1. The mechanism investigation confirmed that the C-O functional group plays the dual role of impurity level and electron transfer in the degradation of tetracycline hydrochloride by spinel NiAl2O4.

Alternative treatment of olive mill wastewater by combined sulfate radical-based advanced electrocoagulation processes

The aim of this study is to investigate the performance of advanced electrocoagulation (EC) process for the treatment of olive mill wastewater. In EC process, iron plates were used as electrodes, and peroxydisulfate (PS) and peroxymonosulfate (PMS) were added as oxidants. The effects of the initial pH value, current density, oxidant dose, and electrolysis time were optimized for pollutant removal from olive mill wastewater by EC-PS and EC-PMS processes. Control experiments showed that addition of oxidants to the conventional EC process increased the pollutant removal efficiency. Classical optimization method was used to determine optimum conditions, which were initial pH 4, current density 40 mA/cm2 , oxidant dose 5 g/L, and electrolysis time 30 min for both processes. Under these conditions, EC-PS and EC-PMS processes achieved 50.5% and 48.9% chemical oxygen demand (COD), 93.8% and 89.3% total phenol, 87.7% and 83% UV254 , and 74.5% and 64.1% total suspended solid removal efficiencies. Quenching experiments were performed to determine the dominant radical species participating in the processes. It was observed that hydroxyl and sulfate radicals were involved in both processes but hydroxyl radicals were more active. Specific energy consumption was calculated as 5.90 kWh/kg COD for EC process, 4.95 kWh/kg COD for EC-PS process, and 5.20 kWh/kg COD for EC-PMS process. The organic removal/sludge ratio of EC-PS process was found to be higher with 17.5 g/L value. Although the application of EC-PS and EC-PMS processes alone is insufficient to meet the discharge limits, they have been found to be effective in olive mill wastewater treatment. PRACTITIONER POINTS: Peroxydisulfate (PS) and peroxymonosulfate (PMS)-based advanced electrocoagulation (EC) was used in olive mill wastewater treatment. 50.5% chemical oxygen demand (COD), 93.8% TP, 87.7% UV254 , and 74.5% TSS removals were achieved by EC-PS. 48.9% COD, 89.3% TP, 83% UV254 , and 64.1% TSS removals were obtained by EC-PMS. Hydroxyl and sulfate radicals were involved in both processes.

Impact of Polythiophene ((C4H4S)n; n = 3, 5, 7, 9) Units on the Adsorption, Reactivity, and Photodegradation Mechanism of Tetracycline by Ti-Doped Graphene/Boron Nitride (Ti@GP_BN) Nanocomposite Materials: Insights from Computational Study

This study addresses the formidable persistence of tetracycline (TC) in the environment and its adverse impact on soil, water, and microbial ecosystems. To combat this issue, an innovative approach by varying polythiophene ((C4H4S)n; n = 3, 5, 7, 9) units and the subsequent interaction with Ti-doped graphene/boron nitride (Ti@GP_BN) nanocomposites was applied as catalysts for investigating the molecular structure, adsorption, excitation analysis, and photodegradation mechanism of tetracycline within the framework of density functional theory (DFT) at the B3LYP-gd3bj/def2svp method. This study reveals a compelling correlation between the adsorption potential of the nanocomposites and their corresponding excitation behaviors, particularly notable in the fifth and seventh units of the polythiophene configuration. These units exhibit distinct excitation patterns, characterized by energy levels of 1.3406 and 924.81 nm wavelengths for the fifth unit and 1.3391 and 925.88 nm wavelengths for the seventh unit. Through exploring deeper, the examination of the exciton binding energy emerges as a pivotal factor, bolstering the outcomes derived from both UV-vis transition analysis and adsorption exploration. Notably, the calculated exciton binding energies of 0.120 and 0.103 eV for polythiophene units containing 5 and 7 segments, respectively, provide compelling confirmation of our findings. This convergence of data reinforces the integrity of our earlier analyses, enhancing our understanding of the intricate electronic and energetic interplay within these intricate systems. This study sheds light on the promising potential of the polythiophene/Ti-doped graphene/boron nitride nanocomposite as an efficient candidate for TC photodegradation, contributing to the advancement of sustainable environmental remediation strategies. This study was conducted theoretically; hence, experimental studies are needed to authenticate the use of the studied nanocomposites for degrading TC.

One-pot synthesis of bimetallic Fe-Cu metal-organic frameworks composite for the elimination of organic pollutants via peroxymonosulphate activation

A series of bimetallic of FeCu metal-organic frameworks (MOFs) have been synthesised using a solvothermal process by varying the ratio between the two metals. Further, the bimetallic MOF catalysts were characterised by X-ray powder diffraction, scanning electron microscopy, and infrared spectroscopy techniques. Their catalytic properties for activation of peroxymonosulphate (PMS) have been tested by the removal of a model dye, rhodamine B. As a result, NH2-Fe2.4Cu1-MOF demonstrated the highest degradation, the effect of the ratio NH2-Fe2.4Cu1-MOF/PMS has been studied, and the main reactive species have been assessed. The application of these MOFs in powder form is difficult to handle in successive batch or flow systems. Thus, this study assessed the feasibility of growing NH2-Fe2,4Cu1-MOF on polyacrylonitrile (PAN) spheres using the one-pot solvothermal synthesis method. The optimisation of the catalytic activity of the synthesised composite (NH2-Fe2.4Cu1-MOF@PAN) has been evaluated by response surface methodology using a central composite face-centred experimental design matrix and selecting as independent variables: time, PMS concentration, and catalyst dosage. Based on the results, the optimisation of the operational conditions has been validated. At 2.5 mM PMS, 90 min, and 1.19 g·L-1 of catalyst dosage, maximum degradation (80.92%) has been achieved, which doubles the removal values obtained in previous studies with other MOFs. In addition, under these conditions, the catalyst has been proven to maintain its activity and stability for several cycles without activity loss.

Architecture and active motif engineering of N-CoS2@C yolk-shell nanoreactor for boosted tetracycline removal via peroxymonosulfate activation: Performance, mechanism and destruction pathways

Rational construction of yolk-shell architecture with regulated binding configuration is crucially important but challengeable for antibiotic degradation via peroxymonosulfate (PMS) activation. In this study, we report the utilization of yolk-shell hollow architecture consisted of nitrogen-doped cobalt pyrite integrated carbon spheres (N-CoS₂@C) as PMS activator to boost tetracycline hydrochloride (TCH) degradation. The creation of yolk-shell hollow structure and nitrogen-regulated active site engineering of CoS₂ endow the resulted N-CoS₂@C nanoreactor with high activity for PMS activating toward TCH degradation. Intriguingly, the N-CoS₂@C nanoreactor exhibits an optimal degradation performance with a rate constant of 0.194 min^-1 toward TCH via PMS activation. The ¹O₂ and SO₄^•- species are demonstrated as the dominant active substances for TCH degradation through quenching experiments and electron spin resonance characterization. The possible degradation mechanism, intermediates and degradation pathways for TCH removal over the N-CoS₂@C/PMS nanoreactor are unveiled. Graphitic N, sp²-hybrid carbon, oxygenated group (C-OH) and Co species are verified as the possible catalytic sites of N-CoS₂@C for PMS activation toward TCH removal. This study offers a unique strategy to engineer sulfides as highly efficient and promising PMS activators for antibiotic degradation.

Electrochemically activated persulfate and peroxymonosulfate for furfural removal: optimization using Box-Behnken design

Furfural removal by electrochemically activated peroxydisulfate (E-PS) and peroxymonosulfate (E-PMS) was investigated. The effect of different anodes was investigated for the electrochemical activation of oxidants. Box Behnken Design was applied to determine optimum operating conditions, which were determined as follows; PS concentration: 2.3 mM, applied current: 1.15 A, pH: 3.5, and reaction time: 118.3 min for E-PS process; PMS concentration: 1.8 mM, applied current: 1.05 A, pH: 3.3, and reaction time: 107.8 min for E-PMS process. The results of the study showed that the E-PMS process is more advantageous in terms of the chemical and electricity costs to be used.

Developing boron carbon nitride/boron carbon nitride-citric acid quantum dot metal-free photocatalyst and evaluating the degradation performance difference of photo-induced species for tetracycline via theoretical and experimental study

For opening a way to synthesize novel metal-free catalysts and clarifying the photodegradation performance difference of photoactive species (such as ·O₂^-, h⁺), a series of metal-free photocatalysts have been synthesized by using different existing forms of the same materials (boron carbon nitride (BCN) and boron carbon nitride-citric acid quantum dot (BCQD)) as precursors via calcinating their mixture at 350 °C. BCQD has good fluorescence and up-conversion fluorescence performance. BCN/BCQD-350 has the highest removal efficiency (90%, including adsorption 60% and photodegradation 30%) for tetracycline (TC) among all samples under visible light irradiation. TC adsorption by BCN/BCQD-350 conforms to pseudo-second-order kinetic and Langmuir isotherm models. TC photodegradation by BCN/BCQD-350 conforms to type II heterojunction mechanism. Photoactive species capture experiments suggest that·O₂^- makes a higher contribution for TC photodegradation, followed by h⁺, ·OH, ¹O₂ and e^-. From LC-MS results, TC photodegradation is initiated by the dehydration step. TC dehydration activated by ·O₂^- has the lowest barrier (43.4 kcal/mol) than that (50.1 kcal/mol) activated by h⁺, that (64.8 kcal/mol) without the activation by photoactive species. TC removal rate of BCN/BCQD-350 (0.01563 min^-1) is higher than that of g-C₃N₄, P25 (TiO₂), BNPA, BCNPA, etc. Furthermore, BCN/BCQD-350 can also photodegrade TC under infrared light irradiation (λ > 800 nm).

Degradation of Textile Dye by Bimetallic Oxide Activated Peroxymonosulphate Process

The sulphate radical based advanced oxidation processes (AOPs) are highly in demand these days, owing to their numerous advantages. Herein, the Fe-Mn bimetallic oxide particle was used to activate peroxymonosulphate (PMS) for Rhodamine B (RhB) degradation. Three bimetallic catalysts were synthesized via the chemical precipitation method with different concentrations of metals; Fe-Mn (1:1), Fe-Mn (1:2) and Fe-Mn (2:1). The best performance was shown by Fe-Mn (2:1) system at optimized conditions; 96% of RhB was removed at optimized conditions. Scavenging experiments displayed the clear dominance of hydroxyl radical in pH 3, while sulphate radical was present in a large amount at pH 7 and 10. The monometallic Fe and Mn oxides were also synthesized to confirm the synergistic effect that was present in the bimetallic oxide system. The application of optimized condition in real textile wastewater was conducted, which revealed the system works efficiently at high concentrations of PMS and catalyst dosage.

Development of Bi2WO6 and Bi2O3 - ZnO heterostructure for enhanced photocatalytic mineralization of Bisphenol A

Present study proposed the synthesis of mixed p-type and n-type nanocomposite heterostructures by co-precipitation method. The as-synthesized heterostructures were characterized through different characterization techniques. The as-synthesized Bi₂WO₆ and Bi₂O₃-ZnO heterostructures were tested as photocatalysts during the photodegradation of Bisphenol A (BPA). The Bi₂O₃-ZnO heterostructure nanocomposite was found to be a more effective photocatalyst than Bi₂WO₆. The effect of operating parameters including catalytic dose (0.02-0.15 gL^-1), initial BPA concentration (5-20 mgL^-1), temperature change (5-20 °C) and solution pH changes (4, 5, 7, and 8) were evaluated with Bi₂O₃-ZnO under UV-light irradiation by selecting a 300 W Xe lamp. More than 90% BPA was degraded with 0.15 gL^-1 Bi₂O₃-ZnO, keeping 1.0 mM H₂O₂ concentration fixed in 250 mL of reaction suspension. The HPLC and GC-MS were used to detect the reaction intermediates and final products. A plausible degradation pathway was proposed on the basis of the identification of reaction intermediates. Repeatability test analysis confirmed that the as-synthesized catalyst showed superb catalytic performance on its removal trend. The kinetics of degradation of BPA were well fitted by the power laws model. With the order of reaction being 0.6, 0.9, 1.2, and 1.3 for different operating parameters, i.e., catalyst dose, initial pH, temperature, and initial BPA concentration.

Peroxymonosulfate-based photocatalytic oxidation of tetracycline by Fe2(MoO4)3/Cd0.5Ni0.5S heterostructure; DFT simulation

The current research is meant to develop novel semiconductor photocatalysts, for the decomposition of tetracycline (TC) as a model organic contaminant in the aquatic environment. The fabrication of Fe₂(MoO₄)₃/Cd_0.5Ni_0.5S (FMO/CNS) composite has proven to be an effective method for improving the sustainability and photocatalytic activity of Cd_0.5Ni_0.5S (CNS). Under visible light irradiation, FMO/CNS nanocomposite demonstrated significant PMS activation which led to 1.36 and 1.81 times TC removal efficiency as compared to immaculate Fe₂(MoO₄)₃(FMO) and CNS. FMO/CNS composite potentially promotes the segregation of electron-hole pairs (e^--h⁺) and exemplifies amazing photocatalytic performance for TC degradation. Its significant photocatalytic activity is due to its unique structure, which includes tiny pores on the surface that confine the PMS molecule to the interface. The FMO/CNS composite has significantly greater piezocatalytic activity than pure FMO and CNS, demonstrating the synergistic effect of FMO and CNS. In the degradation of TC, holes and key reactive radicals (^•O₂^-/^•OH/SO₄^-•) played a major role. Computational studies (DFT) estimates, including the determination of intermediates, confirmed that the hydroxyl addition and C-N cleavage pathways were responsible for TC degradation. As a result, this work delivers a new approach to developing novel photocatalysts with high photocatalytic activity for the abatement of organic contaminants in water.

Efficient visible-light-driven degradation of tetracycline by a 2D/2D rGO-Bi2WO6 heterostructure

Constructing heterostructures has been a simple yet effective strategy for improving the photocatalytic performance of individual semiconductor photocatalysts. However, the poor quality of the contacted interface coupled with the narrow and overlapping light absorption scope between heterocomponents limits potential improvement. Herein, a 2D/2D rGO-Bi₂WO₆ heterostructure with face-to-face compact contact interface and UV to NIR light absorption ability was synthesized to overcome the aforementioned limitations. The as-prepared 2 wt%-rGO-Bi₂WO₆ with a high contact interface quality exhibits the highest kinetic rate of (5.53 ± 0.75) × 10^-2 L mg^-1 min^-1 toward tetracycline (TC) degradation, which is 2.4 times higher than that of pristine Bi₂WO₆ and 2.1 times higher than that of the 2 wt%-rGO-Bi₂WO₆ composite with a poor interface quality. Moreover, approximately 30% of TC can be mineralized with a 2 wt%-rGO-Bi₂WO₆ presented system after 120 min. The subsequent Escherichia coli culture and liquid chromatography-mass spectrometry were employed to detect the biotoxicity variation of degradation intermediates and the possible transformation pathways of TC, respectively. Finally, the reactive species trapping results indicate that photogenerated holes and superoxide radical anions play dominant roles during the TC degradation process. This work provides a facile and effective method to fabricate an efficient heterojunction photocatalyst for pollutant degradation.

Efficient activation of peroxymonosulfate mediated by Co(II)-CeO2 as a novel heterogeneous catalyst for the degradation of refractory organic contaminants: Degradation pathway, mechanism and toxicity assessment

A series of Co(II)-CeO₂ mixed metal oxides were synthesized by a facile hydrothermal-calcination procedure for activating peroxymonosulfate (PMS) and degrading toxic and difficult biodegradable organics. Co(II)-CeO₂ showed excellent degradation performance toward rhodamine B (RhB), toluidine blue, methylene blue and diclofenac. RhB is a refractory organic contaminant, and ecotoxicological evaluation unraveled its harmfulness to the biosphere. RhB was selected as the model pollutant to investigate catalytic mechanisms. Parameters affecting degradation performance were profoundly investigated, including Co:Ce feed ratio, initial pH, PMS dosage, catalyst dosage, RhB concentration, coexisting ions and reaction temperature. Reaction mechanisms were proposed based on density functional theory calculations and identifications of reactive oxygen species. Improvements have been achieved in seven aspects compared to previous studies, including 100% degradation ratio in both real water samples and each reuse of the catalyst, ultrafast degradation rate, cost-effectiveness of the catalyst, toxicity-attenuation provided by the developed degradation method, high degree of mineralization for the model pollutant, negligible leaching of active sites, and the enhancement of catalytic performance by utilizing trace leached cobalt, endowing the technique with broad applicability and prospect.

Electro-enhanced sulfamethoxazole degradation efficiency via carbon embedding iron growing on nickel foam cathode activating peroxymonosulfate: Mechanism and degradation pathway

The combination of peroxymonosulfate (PMS) activation by hetero-catalysis and electrolysis (EC) attracted incremental concerns as an efficient antibiotics degradation method. In this work, carbon embedding iron (C@Fe) catalysts growing on nickel foam (NF) composite cathode (C@Fe/NF) was prepared via in-situsolvothermal growth and carbonization method and used to activate PMS toward sulfamethoxazole (SMX) degradation. The EC-[C@Fe/NF(II)]-PMS system exhibited an excellent PMS activation, with 100% SMX removal efficiency achieving within 30 min. Reactive oxygen species (ROS) generation and their roles in SMX degradation were confirmed by quenching experiments and electron paramagnetic resonance. It was found that singlet oxygen (¹O₂) and surface-bound radicals were responsible for SMX degradation, and ¹O₂ contributed the most. Furthermore, the possible SMX degradation pathways were proposed on the base of the detected degradation intermediates and density functional theory (DFT) calculation. Toxicity changes were also assessed by the Ecological Structure Activity Relationships (ESAR). This work provides a practicable strategy for synergistically enhancing PMS activation efficiency and promoting antibiotics removal.

The potential of green biochar generated from biogas residue as a heterogeneous persulfate activator and its non-radical degradation pathways: Adsorption and degradation of tetracycline

Advanced oxidation aided by sulfate radicals (SO₄^-) is an effective option for the treatment of refractory pollutants from aqueous solutions. In this work, a metal-free biochar catalyst was prepared using pyrolyzed biogas residue as the raw material. The biogas residue carbon (BRC) obtained at 800 °C showed excellent catalytic activity and adsorption capacity for the removal of tetracycline (TC) with 97.9% of removal efficiency. Such performance is accounted for by the rich pores and accelerated electron transformability conferred by its defect structure with the crucial role of pyrolysis temperature in regulating catalyst properties. The BRC-800/peroxymonosulfate (PMS) system worked predominantly through non-radical pathways with high stability/recyclability without being interfered by organic/inorganic compounds in an actual water environment. The exceelent removal performance is also supported by the kinetic reaction rate of the BRC-800/PMS system as estimated to be 0.03017 min^-1. This work provides a simple and effective path for modifying biogas residue waste for versatile applications.

Why the cooperation of radical and non-radical pathways in PMS system leads to a higher efficiency than a single pathway in tetracycline degradation

Current research focused on developing multiple active species in peroxymonosulfate (PMS) system to degrade contaminants, but deepening concern lacks over why cooperation of those active species facilitated a faster degradation. Here, we employed Co₃O₄, rGO and Co₃O₄@rGO composite to activate PMS for tetracycline (TC) degradation, and detected crucial factors toward highest performance of Co₃O₄@rGO/PMS system. Batch experiments exhibited a satisfactory TC degradation efficiency under Co₃O₄@rGO/PMS, complete degraded 50 mg/L TC within 20 min. Analytical tests discovered that radical active species generated by Co₃O₄/PMS and non-radical species by rGO/PMS were successfully co-existed in Co₃O₄@rGO/PMS system, significantly improving the performance of TC removal. Subsequently, a combination of density functional theory (DFT) calculation and intermediates analysis revealed that, in Co₃O₄@rGO/PMS system, the cooperation rather than independent effect of radical and non-radical active species expanded TC degradation pathways, enhancing the degradation performance. Furthermore, decent adaptability, stability, and recyclability toward affecting factors variation of Co₃O₄@rGO/PMS demonstrated it as a potent and economical system to degrade TC. Overall, this study developed a novel Co₃O₄@rGO/PMS system with a cooperative oxidation pathway for highly efficient TC removal, and managed to clarify why this oxidation pathway achieved high efficiency through a combination of theoretical and experimental method.

Polyoxometalates for bifunctional applications: Catalytic dye degradation and anticancer activity

Improving the efficiencies of organic compound degradations by catalytic materials is a challenging materials research field. In our research, we successfully synthesized cobalt-based polyoxometalates (CoV-POMs) via a simple crystallization-driven self-assembly method. The incorporation of the newly synthesized CoV-POMs into peroxymonosulphate (PMS), forming a mixture, greatly enhancing the catalytic activation for a complete degradation of dye solution. The positive synergic effect between CoV-POMs and PMS was substantiated by a relatively meager degradation of less than 10% in the system without CoV-POMs, in which CoV-POMs played a vital role to activate PMS towards free radicals generation for dye degradation. Methylene blue (MB) and rhodamine B (RB) dyes were completely decolorized under 60 min with the presence of 40 mg/L CoV-POMs and 150 mg/L PMS. The CoV-POMs/PMS system was pH dependance with a lower dye degradation efficiency at elevated pH. The effect of pH was more prominent in RB dye, in which the degradation efficiency dropped drastically from 93.3% to 41.12% with the increase in the solution pH from 7 to 11. The quenching tests suggested that sulfate radicals were the dominant active species involving in the dye degradation reaction. Besides MB and RB dyes, CoV-POMs/PMS system also showed significant activity towards the degradation of phenol red (PR) and methyl orange (MO) dyes. In the biological test, CoV-POMs exhibited non-toxic behavior towards normal cells that reduced safety concern for the large-scale wastewater treatment application. In addition, the testing divulged the anticancer property of CoV-POMs with more than 35 % of A549 lung adenocarcinoma and MDA-MB-231 breast adenocarcinoma were killed with 250 mg/L CoV-POMs. The selective lethality of CoV-POMs towards cancer cells was found to be caused by different extents of cellular apoptosis. In overall, the synthesized bifunctional CoV-POMs manifested superior activities in the examined applications, specifically dye degradation and anticancer.

Photodeposition of CoOx nanoparticles on BiFeO3 nanodisk for efficiently piezocatalytic degradation of rhodamine B by utilizing ultrasonic vibration energy

Piezoelectric materials have received much attention due to their great potential in environmental remediation by utilizing vibrational energy. In this paper, a novel piezoelectric catalyst, CoOx nanoparticles anchored BiFeO3 nanodisk composite, was intentionally synthesized via a photodeposition method and applied in piezocatalytic degradation of rhodamine B (RhB) under ultrasonic vibration. The as-synthesized CoOx/BiFeO3 composite presents high piezocatalytic efficiency and stability. The RhB degradation rate is determined to be 1.29 h-1, which is 2.38 folds higher than that of pure BiFeO3. Via optimizing the reaction conditions, the piezocatalytic degradation rate of the CoOx/BiFeO3 can be further increased to 3.20 h-1. A thorough characterization was implemented to investigate the structure, piezoelectric property, and charge separation efficiency of the CoOx/BiFeO3 to reveal the nature behind the high piezocatalytic activity. It is found that the CoOx nanoparticles are tightly adhered and uniformly dispersed on the surface of the BiFeO3 nanodisks. Strong interaction between CoOx and BiFeO3 triggers the formation of a heterojunction structure, which further induces the migration of the piezoinduced holes on the BiFeO3 to CoOx nanoparticles. The recombination of electron-hole pairs is retarded, thereby increasing the piezocatalytic performance greatly. This work may offer a new paradigm for the design of high-efficiency piezoelectric catalysts.

Aquaculture drug degradation in persulfate by PANI-based microparticles controlled via ultrasonic field: Forced motion of "burning hot micromotors"

The triphenylmethane derivative malachite green (tpm_MaG) despite repeated prohibitions but is frequently detected in aquatic environment and draws emerging attention because of the potential poisonous effects. The polyaniline/persulfate with ultrasound catalysis (US/PANI-PS) was developed for tpm_MaG removal. The effects of 12 factors and the optimization by response surface methodology (RSM) for tpm_FG removal were evaluated based on the pseudo-first-kinetics (k_obs). From free radical inhibition, the ratios of active species in US/PANI-PS (δ₁₁ = 0.355, δ₁₂ = 0.593) were close to that in US-PS (δ₂₁ = 0.346, δ₂₂ = 0.586) and different to that in PANI-PS and PS systems. A possible degradation pathway (hydroxylation, N-demethylation, deamination, and open-benzene ring) was explored by gas chromatography-mass spectrometer (GC/MS) and high performance liquid chromatography-mass spectrometer (HPLC-MS). The designed reactor involving the US-driven PANI was simulated by acoustic-piezoelectric interaction. From cavitation calculations, the estimated effective-mean temperature at bubble-water interface had little increasing (from 704 K to 711 K) after adding the PANI, however, the adsorption capacity of tpm_MaG in reactive zone decreased from 0.0891 μM to 0.0787 μM. The mechanism (PANI hot turbo-micromotors) with US/PANI-PS was proposed. The tpm_MaG was removed with a low treatment cost of 2.81 $⋅m^-3 (the EE/O value 18.29 kWh⋅m^-3) by US/PANI-PS, presenting a cost-effective treating process. The reusability tests and characterizations (contact angle, X-ray diffraction (XRD), and scanning electron microscope (SEM)) further confirmed the stability of PANI.

Activation of peroxymonosulfate by biochar and biochar-based materials for degrading refractory organics in water: a review

Water pollution caused by refractory organics has attracted widespread concern in recent years. At this time peroxymonofulfate (PMS) has been widely used to generate sulfate radicals with high reactivity and potential. The direct reaction rate between PMS and organics is very low. However, the activated PMS has a strong oxidizing ability on organics due to its conversion into sulfate radicals. Recently, the free radicals generated by oxidant PMS and catalyst biochar have proven to be an effective species in dealing with refractory organics. In order to enable researchers to better understand the current research status of PMS/biochar, and to promote the development and application of PMS/biochar system, we have written this review. This review in detail described the mechanism of PMS activated by biochar materials, and summarized the influencing factors of refractory organics degradation in the PMS/biochar system. In addition, the active sites of PMS/biochar, the degradation mechanism of refractory organics, and the reusability of biochar catalysts were also discussed. Finally, the concluding remarks and perspectives were made for future research on the PMS/biochar system in the degradation of refractory organics.

Clinoptilolite mediated activation of peroxymonosulfate through spherical dispersion and oriented array of NiFe2O4: Upgrading synergy and performance

Inspired by the features of both transition metal oxide and natural clinoptilolite (flaky structure with suitable pore diameter and open skeleton structure), we adopted a robust strategy by immobilization of nickel ferrite nanoparticles (NiFe₂O₄) on the clinoptilolite surface via typical citric acid combustion method. The hybrid catalyst exhibited enhanced peroxymonosulfate (PMS) activation efficiency and bisphenol A (BPA) degradation performance. Calculated by effective equivalent of NiFe₂O₄, it is found that the reaction rate constant (k) of NiFe₂O₄/clinoptilolite/PMS system (0.1859 min^-1) was 11.9 times higher than that of bare NiFe₂O₄/PMS system (0.0156 min^-1), which demonstrated that catalyst would be conjugated to PMS or contaminant efficiently and renders the rapid degradation and mineralization in the presence of clinoptilolite. After comprehensive characterization analysis and DFT simulations, natural mineral carrier effect (i.e. decreased crystalline size, increased oxygen vacancy content, etc.), abundant surface-bonded and structural hydroxyl groups as well as effective bonding with iron or nickel ions charged for the potential activation mechanism of PMS by NiFe₂O₄/clinoptilolite composite. And it is indicated that not only ^•OH and SO₄^•-, but also ¹O₂ was involved into series reactions. Overall, this study put forward a green and promising technology for high-toxic wastewater treatment.

Simultaneous photocatalytic Cr(VI) reduction and phenol degradation over copper sulphide-reduced graphene oxide nanocomposite under visible light irradiation: Performance and reaction mechanism

The contamination of water by synthetic organic molecules and trace metals is a growing challenge, in spite of the enormous research efforts being made in the field of water treatment. In this study, reduced graphene oxide-copper sulphide (rGO-CuS) nanocomposites of different rGO/CuS (2/1, 1/1, 1/2) molar ratios were fabricated via a facile one-step hydrothermal method. The nanocomposite materials, named hereafter as 2rGO-CuS, rGO-CuS and rGO-2CuS, were characterized using various analytical techniques, including X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray (EDX) spectroscopy, X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometry. The photocatalytic performance of the nanocomposites was assessed under visible light irradiation (λ > 420 nm) for the simultaneous photocatalytic reduction of Cr(VI) and phenol degradation. It was found that rGO-2CuS achieved a remarkable enhancement of the photocatalytic activity among the prepared nanocomposites for the degradation of phenol and reduction of Cr(VI). Therefore, the simultaneous photocatalytic phenol degradation and Cr(VI) reduction over rGO-2CuS sample was further investigated. The experimental results revealed that rGO-2CuS catalyst maintained good degradation efficacy of mixed pollutants after 6 runs and dissolved oxygen was found to be essential to promote Cr(VI) reduction and phenol degradation. A detailed photocatalytic activity under visible light irradiation mechanism was proposed based on quenching experiments and fluorescence measurements.

Sonochemical fabrication of inorganic nanoparticles for applications in catalysis

Catalysis covers almost all the chemical reactions or processes aiming for many applications. Sonochemistry has emerged in designing and developing the synthesis of nano-structured materials, and the latest progress mainly focuses on the synthetic strategies, product properties as well as catalytic applications. This current review simply presents the sonochemical effects under ultrasound irradiation, roughly describes the ultrasound-synthesized inorganic nano-materials, and highlights the sonochemistry applications in the inorganics-based catalysis processes including reduction, oxidation, degradation, polymerization, etc. Or all in all, the review hopes to provide an integrated understanding of sonochemistry, emphasize the great significance of ultrasound-assisted synthesis in structured materials as a unique strategy, and broaden the updated applications of ultrasound irradiation in the catalysis fields.

A Review on Additives-assisted Ultrasound for Organic Pollutants Degradation

In the past 2 decades, considerable attentions have been paid to the sonochemical advanced oxidation processes (SAOPs) in the fields of pollutants removal. SAOPs are powerful methods for refractory pollutants degradation due to the free radicals (e.g., •OH and •H) generated by water pyrolysis and extremely high temperature and pressure in and around cavitation bubbles. Reports on various additives for the improvement of sonochemical pollutants degradation including oxidants, inorganic anions, etc. have been made. This paper presents a comprehensive review on the ultrasound (US) alone and sono-hybrid systems for various pollutants degradation. In this paper, the degradation efficiency of various pollutants in sono-hybrid systems are elucidated in detail, and particular emphasis is placed on the reaction mechanism of additives in US for the enhancement of pollutants degradation. The problems on the applications of the current sono-hybrid systems are identified and discussed, and the outlooks for further in-depth studies on the challenges and some research needs for the applications of SAOPs for the removal of organic pollutants from aquatic systems are made at the end.

Uniform Mesoporous Amorphous Cobalt-Inherent Silicon Oxide as a Highly Active Heterogeneous Catalyst in the Activation of Peroxymonosulfate for Rapid Oxidation of 2,4-Dichlorophenol: The Important Role of Inherent Cobalt in the Catalytic Mechanism

Amorphous cobalt-inherent silicon oxide (Co-SiOx) was synthesized for the first time and employed as a highly active catalyst in the activation of peroxymonosulfate (PMS) for the rapid oxidation of 2,4-dichlorophenol (2,4-DCP). The characterization results revealed that the 0.15Co-SiOx possessed a high specific surface area of 607.95 m²/g with a uniform mesoporous structure (24.33 nm). The X-ray diffraction patterns indicate that the substituted cobalt atoms enlarge the unit cell parameter of the original SiO₂, and the selected area electron diffraction pattern confirmed the amorphous nature of Co-SiOx. More bulk oxygen vacancies (O_v) existing in the Co-SiOx were identified to be one of the primary contributors to the significantly enhanced catalytic activation of PMS. The cobalt substitution both creates and stabilizes the surficial O_v and forms the adequately active Co(II)-O_v pairs which engine the electron transfer process during the catalytic activities. The active Co(II)-O_v pairs weaken the average electronegativity of Co/Si and Co/O sites, resulting in the prevalent changes in final state energy, which is the main driving cause of the binding energy shifts in the X-ray photoelectron spectroscopy (XPS) spectra of Si and O among all samples. The increase of the relative proportion of Co(III) in the spent Co-SiOx probably causes the binding energy shifts of the Co XPS spectrum compared to that of the Co-SiOx. The amorphous Co-SiOx outperforms stable and quick 2,4-DCP degradation, achieving a much higher kinetic rate of 0.7139 min^-1 at pH = 7.02 than others via sulfate radical advanced oxidation processes (AOPs), photo-Fenton AOPs, H₂O₂ reagent AOPs, and other AOP approaches. The efficient degradation performance makes the amorphous Co-SiOx as a promising catalyst in removing 2,4-DCP or organic-rich pollutants.

Degradation of Acid Red 73 by Activated Persulfate in a Heat/Fe3O4@AC System with Ultrasound Intensification

This work aimed to investigate the degradation efficiency of waste water with an azo dye, Acid Red 73 (AR73), by persulfate/heat/Fe₃O₄@AC/ultrasound (US). The introduction of ultrasound into the persulfate/heat/Fe₃O₄@AC system greatly enhanced the reaction rate because of the physical and chemical effects induced by cavitation. Various parameters such as temperature, initial pH, sodium persulfate dosage, catalyst dosage, initial concentration of AR73, ultrasonic frequency and power, and free-radical quenching agents were investigated. The optimal conditions were determined to be AR73 50 mg/L, PS 7.5 mmol/L, catalyst dosage 2 g/L, ultrasound frequency 80 kHz, acoustic density 5.4 W/L, temperature 50 °C, and pH not adjusted. Nearly, 100% decolorization was achieved within 10 min under optimal conditions. Different from some other similar research studies, the reaction did not follow a radical-dominating way but rather had ¹O₂ as the main reactive species. The recycling and reusability test confirmed the superiority of the prepared Fe₃O₄@AC catalyst. The research achieved a rapid decolorization method not only using waste heat of textile water as a persulfate activator but also applicable to a complex environment where common radical scavengers such as ethanol exist.

Comparing biochar- and bentonite-supported Fe-based catalysts for selective degradation of antibiotics: Mechanisms and pathway

The selective degradation of recalcitrant antibiotics into byproducts with low toxicity and high biodegradability has been increasingly popular using peroxymonosulfate (PMS) based advanced oxidation processes (AOPs). In this paper, two Fe-based heterogeneous catalysts, bentonite supported Fe-Ni composite (BNF) and biochar-supported Fe composite (Fe/C), were tailored and comprehensively characterized for distinctive physicochemical properties, crystalline structures, and interfacial behaviors. Two widely used antibiotics, sulfapyridine (SPY) and oxytetracycline (OTCs) at their common concentrations in pharmaceutical wastewaters (250 and 10 mg L^-1) were tested for degradation in three PMS-based oxidation processes, i.e., PMS, PMS-BNF, and PMS-Fe/C, respectively. Results demonstrated that a large amount of PMS (10 and 1 mM) could effectively remove SPY (0.385 min^-1, 100% removal) and OTC (2.737 min^-1, 100% removal) via¹O₂ derived from PMS self-decomposition and non-radical pathway, respectively. Additional Fe-based catalysts (0.5 g L^-1 Fe/C and BNF) significantly reduced the PMS consumption (1 and 0.25 mM) and accelerated the reaction rate (1.08 and 5.05 min^-1) of SPY and OTC removal. Moreover, the supplementary catalysts shifted the degradation route. The biochar matrix in Fe/C composite contributed to predominant interaction with PMS forming ¹O₂, which preferably attacked SPY via hydroxylation. In contrast, the redox-active Fe-Ni pairs induced SO₄^- formation, which could selectively degrade OTC through decarboxylation. Thus, these results are conducive to tailoring advanced yet low-cost heterogeneous catalysts for eco-friendly treatment of antibiotics-rich industrial wastewaters.

Enhanced visible-light photocatalytic degradation of tetracycline by a novel hollow BiOCl@CeO2 heterostructured microspheres: Structural characterization and reaction mechanism

A high-efficiency hollow BiOCl@CeO₂ heterostructured microspheres with type-II staggered-gap type was successfully synthesized by precipitation-hydrothermal process loaded with BiOCl nanoparticles on CeO₂ microspheres. XRD, FT-IR, EDS, SEM, HRTEM and XPS results show that the prepared materials have good crystallization, morphology and retain hollow spherical structure of CeO₂. Batch experiments indicate that the photocatalytic performance of BiOCl@CeO₂ towards Tetracycline (TC) is superior to pure BiOCl or CeO₂ owing to the distinctive hollow structures and the formed heterostructure between BiOCl and CeO₂. Cyclic experiment exhibits that the optimal BiOCl@CeO₂ photocatalyst can still photodegrade more than 80% of TC in 120 min after 4 cycles. Additionally, the reactive oxidation species (ROS) trapping experiments reveal that the critical ROS include photogenerated holes (h⁺) and superoxide radical anions (O^2-). Finally, the possible degradation pathways of TC and enhanced photodegradation mechanism was systematically discussed. On this basis, the hollow BiOCl@CeO₂ heterostructured microspheres provide a new alternative with great potential in efficient visible-light-driven photodegradation of persistent organic pollutants.

Catalytic degradation of organic pollutants in Fe(III)/peroxymonosulfate (PMS) system: performance, influencing factors, and pathway

This study demonstrated, for the first time, Fe(III)/peroximonosulphate (PMS) could be an efficient advanced oxidation process (AOP) for wastewater treatment. Bisphenol A (BPA) was chosen as a model pollutant in the present study. Fe(III)-activated PMS system proved very effective to eliminate 92.18% of BPA (20 mg/L) for 30-min reaction time at 0.50 mM PMS, 1.5 g/L Fe(III), pH 7.0. The maximum degradation of BPA occurred at neutral pH, while it was suppressed at both strongly acidic and alkaline conditions. Organic and inorganic ions can interfere with system efficiency either positively or negatively, so their interaction was thoroughly investigated. Furthermore, the presence of organic acids also affected BPA degradation rate, especially the addition of 10 mM citric acid decreased the degradation rate from 92.18 to 66.08%. Radical scavenging experiments showed that SO₄^•- was the dominant reactive species in Fe(III)/PMS system. A total of 5 BPA intermediates were found by using LC/MS. A possible degradation pathway was proposed which underwent through bridge cleavage and hydroxylation processes. Acute toxicity of the BPA degradation products was assessed using Escherichia coli growth inhibition test. These findings proved to be promising and economical to deal with wastewater using iron mineral for the elimination of organic pollutants. Graphical abstract.

A review on carbon-based materials for heterogeneous sonocatalysis: Fundamentals, properties and applications

Contamination of water resources by refractory organic pollutants is of great environmental and health concern because these compounds are not degraded in the conventional wastewater treatment plants. In recent years, sonocatalytic treatment has been considered as a promising advanced oxidation technique for the acceptable degradation and mineralization of the recalcitrant organic compounds. For this purpose, various sonocatalysts have been utilized in order to accelerate the degradation process. The present review paper provides a summary of published studies on the sonocatalytic degradation of various organic pollutants based on the application of carbon-based catalysts, including carbon nanotubes (CNTs), graphene (GR), graphene oxide (GO), reduced graphene oxide (rGO), activated carbon (AC), biochar (BC), graphitic carbon nitride (g-C₃N₄), carbon doped materials, buckminsterfullerene (C60) and mesoporous carbon. The mechanism of sonocatalytic degradation of different organic compounds by the carbon-based sonocatalysts has been well assessed based on the literature. Moreover, the details of experimental conditions such as sonocatalyst dosage, solute concentration, ultrasound power, applied frequency, initial pH and reaction time related to each study have also been discussed in this review. Finally, concluding remarks as well as future challenges in this research field regarding new areas of study are also discussed and recommended.

A review of graphene-based nanomaterials for removal of antibiotics from aqueous environments

Antibiotics as emerging pharmaceutical pollutants have seriously not only threatened human life and animal health security, but also caused environmental pollution. It has drawn enormous attention and research interests in the study of antibiotics removal from aqueous environments. Graphene, an interesting one-atom-thick, 2D single-layer carbon sheet with sp² hybridized carbon atoms, has become an important agent for removal of antibiotic, owing to its unique physiochemical properties. Recently, a variety of graphene-based nanomaterials (GNMs) are reported to efficiently remove antibiotics from aqueous solutions by different technologies. In this review, we summarize different structure and properties of GNMs for the removal of antibiotics by adsorption. Meanwhile, advanced oxidation processes (AOPs), such as photocatalysis, Fenton process, ozonation, sulfate radical and combined AOPs by the aid of GNMs are summarized. Finally, the opportunities and challenges on the future scope of GNMs for removal of antibiotics from aqueous environments are proposed.

Sonocatalytic degradation of tetracycline antibiotic using zinc oxide nanostructures loaded on nano-cellulose from waste straw as nanosonocatalyst

The aim of the present investigation was the combination of ZnO nanostructures with nano-cellulose (NC) for the efficient degradation of tetracycline (TC) antibiotic under ultrasonic irradiation. The removal efficiency of 12.8% was obtained by the sole use of ultrasound (US), while the removal efficiency increased up to 70% by the US/ZnO treatment process. Due to the integration of ZnO nanostructures with NC, the removal efficiency of 87.6% was obtained within 45 min. The removal efficiency substantially decreased in the presence of tert-butyl alcohol (more than 25% reduction), indicating that ^radOH-mediation oxidation is responsible for the degradation of TC molecules. Peroxymonosulfate (PMS) led to the most enhancing effect on the removal of TC among percarbonate, persulfate and periodate ions. The addition of PMS caused the degradation efficiency of 96.4% within the short contact time of 15 min. The bio-toxicity examination on the basis of inhibition test conducted on activated sludge revealed diminishing the oxygen consumption inhibition percent [I_OUR (%)] from 33.6 to 22.1% during the US/ZnO/NC process. Consequently, the utilization of the US/ZnO/NC process can convert TC molecules to less toxic compounds. However, longer reaction time is required for complete conversion into non-toxic substances.