Activated carbon from Ceiba pentandra hulls, an agricultural waste, as an adsorbent in the removal of lead and zinc from aqueous solutions

Adsorption plasticizer by nanosphere adsorbent of persimmon tannin binding bovine serum protein

In this study, nanosphere (NS) of a persimmon tannin binding bovine serum protein (BSA-PT-NS) adsorbent were prepared. The BSA-PT-NS exhibited good adsorption capacity for the plasticizer diethyl phthalate (DEP), with an adsorption rate of 74.5 %. The BSA-PT-NSs were spherical and their surfaces appeared to be uneven. The FT-IR and XPS results indicated that the adsorption of DEP was mainly due to the phenol hydroxyl group on PT, and the CO and -NH- functional groups of BSA also contributed. The addition of Na+, Ca2+, and Mg2+ significantly decreased the adsorption rate (P < 0.05). The maximum DEP adsorption capacity of BSA-BT-NS was calculated to be 487.8 mg/g based on the Langmuir linear model. The adsorption kinetics results showed that the pseudo-first-order model fitted well. The DEP removal rate remained above 68 % after five cycles, demonstrating that the BSA-PT-NSs had excellent regeneration properties for DEP adsorption.

Moss biomass as effective biosorbents for heavy metals in contaminated water

The study explored batch adsorption of Cd(II) and Pb(II) ions using moss biomass from Barbula consanguinea and Hyophila involuta, assessing removal efficiency concerning various parameters. Both moss species showed high removal rates for Cd(II) (87 % for B. consanguinea and 89 % for H. involuta) and Pb(II) (93 % for B. consanguinea and 94 % for H. involuta) from contaminated water, reaching equilibrium within 30 min. While Cd(II) removal was pH-independent, Pb(II) removal showed pH-dependence, peaking at pH 5.0-5.5. Adsorption isotherm analysis indicated that the Langmuir, Freundlich, Elovich, Sips, and Redlich-Peterson models best described Cd(II) and Pb(II) adsorption onto both moss species (except for Cd(II) adsorption onto H. involuta), with R 2  > 0.98. This confirms a heterogeneous surface with both monolayer and multilayer adsorption sites. The pseudo-second-order kinetic model confirmed chemisorption on moss biomass from both species. FTIR spectra identified major binding sites such as phenols, alkaloids, amines, alkenes, nitro compounds, and low-molecular-weight carbohydrates. EDS analysis validated the bonding of Cd(II) and Pb(II) ions to the biomass surface by displacing Ca(II) ions. According to the Langmuir model, moss biomass exhibited selective adsorption, favoring Pb(II) over Cd(II). B. consanguinea showed a higher adsorption capacity than H. involuta, which is attributed to its higher negative zeta potential. This study underscores the novelty of moss biomass for heavy metal removal in wastewater treatment, highlighting its sustainability, effectiveness, cost-efficiency, versatility, and eco-friendliness.

Comprehensive assessment of carbon-, biomaterial- and inorganic-based adsorbents for the removal of the most hazardous heavy metal ions from wastewater

Owing to the high cost of recycling waste, underdeveloped countries discharge industrial, agricultural, and anthropogenic effluents without pretreatment. As a result, pollutant-loaded waste enters water bodies. Among the diverse toxic contaminants, heavy metal ions are the most detrimental because of their chronic toxicity, non-degradability, prevalence, and bioaccumulation. The growing shortage of water resources demands the removal of heavy metal ions from wastewater. Three SDGs of the sustainability agenda of the United Nations appeal for clean water to protect life beneath water and on land depending on the water sources. Therefore, efficient environmentally friendly approaches for wastewater treatment are urgently required. In this regard, several methods have been developed for the removal of heavy metal ions from wastewater, including adsorption as the most widely used method owing to its eco-friendly, cost-effective, and sustainable nature. The present review discusses the progress in the preparation and application of various adsorbents based on carbon, micro-organisms, agricultural waste and inorganic materials for the extraction of toxic metal ions such as Pb2+, Cr6+, As3+, As5+, Hg2+ and Cd2+. Herein, we provide information on the role of the homogeneity and heterogeneity of adsorbents, kinetics of the adsorption of an adsorbate on the surface of an adsorbent, insights into adsorption reaction pathways, the mechanism of the sorption process, and the uptake of solutes from solution. The present review will be useful for researchers working on environmental protection and clean environment.

Preparation of Biosorbent from Kapok Fruit Peel (Ceiba pentandra) for Adsorption of Lead Waste

The preparation of biosorbent from kapok fruit peel (KBK) for lead (Pb(II)) removal was conducted mechanically by expanding the surface of the biosorbent and activating KBK with the addition of 1 M HCl for 20 minutes. The effect of activation on increasing the number of active groups and the number of pores in the biosorbent was proven by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). The FTIR data showed a shift and an increase in wavenumber intensities of active adsorbent groups such as -OH and -C=O. The SEM data revealed that the morphology of the adsorbent increased in the number of pores that appeared rough and irregular. The Pb(II) adsorption treatment used a batch method at pH 2–5, contact time of 0–120 minutes, and adsorbate concentration of 10–50 ppm. The adsorption of Pb(II) ions reached optimum conditions at pH 4 and a contact time of 60 minutes, with an adsorption capacity of 6.9522 mg/g and an adsorption rate of 98.71%. Adsorption data showed that Pb(II) ions uptake to KBK biosorbent followed the Langmuir isotherm model equation and pseudo-second-order kinetic model. The adsorption capacity of activated KBK is greater than that of non-activated KBK.

Multi-Walled Carbon Nanotubes Functionalized with Hydroxamic Acid Derivatives for the Removal of Lead from Wastewater: Kinetics, Isotherm, and Thermodynamic Studies

Hydroxamic acids are recognized chelators for various metals; however, using them as functional groups on carbon nanotubes (CNTs) is rare. In this study, novel multi-walled carbon nanotubes (MWCNTs) functionalized with hydroxamic acid derivatives were developed. The MWCNTs were first oxidized, and the resulting product, MWCNT-COOH (A), was treated with oxalyl chloride to yield MWCNT-COCl. The functionalized MWCNTs were susceptible to reacting with the hydroxylamine derivatives of type R–NHOH and produced MWCNTs functionalized with the following hydroxamic acid derivatives (MWCNT-HA): MWCNT-CONOHMe (B), MWCNT-CONOHCOMe(C), and MWCNT-CONOHPh (D). The synthesized derivatives were confirmed by various techniques such as scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. In order to examine their chelation ability, these materials were examined as possible new adsorbents for harmful Pb(II) particles. The adsorption efficiency of the functionalized MWCNT adsorbents toward Pb(II) was investigated. The effects of the adsorbent dose, temperature, pH, and time on adsorption efficiency were considered, and adsorption boundaries that resulted in enhanced effectiveness were obtained. The developed materials were found to have extraordinary coordination sites, such as amine, hydroxyl, and carboxyl groups, which served as excellent chelating specialists for the Pb(II) particles. Thermodynamic and kinetic investigations revealed the unconstrained nature of the adsorption of Pb(II) by the developed MWCNT adsorbents at room temperature. The adsorption was noted to follow the pseudo-second-order and Langmuir isotherm models.

Removal of lead ions (Pb2+) from water and wastewater: a review on the low-cost adsorbents

The presence of lead compounds in the environment is an issue. In particular, supply water consumption has been reported to be a significant source of human exposure to lead compounds, which can pose an elevated risk to humans. Due to its toxicity, the International Agency for Research on Cancer and the US Environmental Protection Agency (USEPA) have classified lead (Pb) and its compounds as probable human carcinogens. The European Community Directive and World Health Organization have set the maximum acceptable lead limits in tap water as 10 µg/L. The USEPA has a guideline value of 15 µg/L in drinking water. Removal of lead ions from water and wastewater is of great importance from regulatory and health perspectives. To date, several hundred publications have been reported on the removal of lead ions from an aqueous solution. This study reviewed the research findings on the low-cost removal of lead ions using different types of adsorbents. The research achievements to date and the limitations were investigated. Different types of adsorbents were compared with respect to adsorption capacity, removal performances, sorbent dose, optimum pH, temperature, initial concentration, and contact time. The best adsorbents and the scopes of improvements were identified. The adsorption capacity of natural materials, industrial byproducts, agricultural waste, forest waste, and biotechnology-based adsorbents were in the ranges of 0.8-333.3 mg/g, 2.5-524.0 mg/g, 0.7-2079 mg/g, 0.4-769.2 mg/g, and 7.6-526.0 mg/g, respectively. The removal efficiency for these adsorbents was in the range of 13.6-100%. Future research to improve these adsorbents might assist in developing low-cost adsorbents for mass-scale applications.

Effects of wetland plant biochars on heavy metal immobilization and enzyme activity in soils from the Yellow River estuary

The purpose of this study was to assess the effects of wetland plant biochars on the enzyme activity in heavy metal contaminated soil. The biochars were produced from Phragmites australis (PB), Suaeda salsa (SB), and Tamarix chinensis (TB) under different pyrolysis temperatures and times. The detected pyrolysis products showed that the ash, pH, electrical conductivity, and carbon content of the biochars increased significantly, while the production rate of the biochars decreased with increasing pyrolysis temperature and time. The results of the adsorption experiments indicated that biochar addition could effectively reduce the concentration of Pb and/or Cd in the Pb²⁺/Cd²⁺ single or mixed solutions, but the Pb²⁺ and Cd²⁺ in the mixed solution indicated a competitive adsorption. A 30-day incubation experiment was conducted using salt marsh soil amended with different biochar application rates to investigate the short-term effects of biochar addition on Pb and Cd immobilization. The PB and SB significantly immobilized Pb within the first 15 days, but Pb remobilized within the next 15-day period. In contrast, TB addition did not significantly fix Pb. Moreover, biochar addition promoted the conversion of Cd from the residue to the less immobile fractions. The addition of three types of plant biochar had no significant effect on the urease activity in wetland soil but significantly increased soil sucrase activity. PB and SB significantly promoted catalase activity, while TB significantly inhibited soil catalase activity. According to the adsorption effect, the fixation effect, and the promotion of enzyme activities, the Suaeda salsa biochars are suitable for the remediation of heavy metal pollution in wetland soils.

Cibacron blue F3GA incorporated immobilized metal chelate affinity sorbent as a high efficient affinity immobilization materials for catalase enzyme

Catalase is a metalloenzyme commonly found in almost all plant and animal tissues and catalyzes the conversion of hydrogen peroxide to less reactive molecules. It is used for the elimination of hydrogen peroxide in biological, biomedical, food and textile applications. For this purpose, a novel affinity sorbent [poly(methacrylic acid- N-isopropyl acrylamide-CB-Fe³⁺, (p(MAA-NIPAAM)-CB-Fe³⁺)] for the determination and it was first developed using MAA and NIPAAM monomers. After characterization with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray Photoelectron Spectroscopy (XPS), adsorption parameters were determined. Reusability of p(MAA-NIPAAM)-CB-Fe³⁺ sorbent was determined after by determining the appropriate desorption agent for desorption of adsorbed catalase in the developed sorbent. It was determined that catalase adsorption could be performed with 0.01 g of sorbent in 45 min. The maximum adsorption capacity for catalase adsorption was determined as 243.17 mg/g with the use of sorbent. The operational and storage stability of the immobilized catalase was found to be high as expected. The conversion of H₂O₂ can be successfully performed by the immobilized enzyme in the prepared sorbent. It has been proven that the affinity of catalase for its substrate is increased by immobilization.

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

A novel core-shell magnetic Prussian blue-coated Fe3O4 composites (Fe3O4@PB) were designed and synthesized by in-situ replication and controlled etching of iron oxide (Fe3O4) to eliminate Cd (II) from micro-polluted water. The core-shell structure was confirmed by TEM, and the composites were characterized by XRD and FTIR. The pore diameter distribution from BET measurement revealed the micropore-dominated structure of Fe3O4@PB. The effects of adsorbents dosage, pH, and co-existing ions were investigated. Batch results revealed that the Cd (II) adsorption was very fast initially and reached equilibrium after 4 h. A pH of 6 was favorable for Cd (II) adsorption on Fe3O4@PB. The adsorption rate reached 98.78% at an initial Cd (II) concentration of 100 μg/L. The adsorption kinetics indicated that the pseudo-first-order and Elovich models could best describe the Cd (II) adsorption onto Fe3O4@PB, indicating that the sorption of Cd (II) ions on the binding sites of Fe3O4@PB was the main rate-limiting step of adsorption. The adsorption isotherm well fitted the Freundlich model with a maximum capacity of 9.25 mg·g-1 of Cd (II). The adsorption of Cd (II) on the Fe3O4@PB was affected by co-existing ions, including Cu (II), Ni (II), and Zn (II), due to the competitive effect of the co-adsorption of Cd (II) with other co-existing ions.

Leaching Performance and Zinc Ions Removal from Industrial Slag Leachate Using Natural and Biochar Walnut Shell

This study aims to investigate leaching characteristics of zinc slag according to leaching tests, including; TCLP (Toxicity Characteristic Leaching Procedure), SPLP (Synthetic Precipitation Leaching Procedure), ASTM-D3987 (American Society for Testing and Materials), and TS EN-12457-4 (Turkish Standards Institute) tests methods. The present study describes the adsorption potential of natural and biochar walnut shells for removing ions from the zinc leachate. TCLP leachate, with a value of 38.575 mg/L, has a high zinc (Zn⁺²) concentration compared to other methods. Therefore, TCLP leachate was used in the adsorption experiments. Adsorption experiments were carried out at different adsorbent dosages, pH values, and contact time conditions. In the dosage study, the highest removal efficiency was obtained as 84% and 92% in natural and biochar walnut shell adsorbents, respectively. As a result of pH study, it was observed that adsorption under alkaline conditions had a much higher removal efficiency. Moreover, adsorption studies performed against contact time were applied to four different kinetic models and both adsorbents were found to be fit with the pseudo-second-order model. This kinetic model showed that the Zn⁺² adsorption mechanism of natural and biochar walnut shells is chemical adsorption. With this study, it was shown that a very high 96% zinc removal can be achieved under optimum adsorption conditions. This may be the first study of zinc removal after leaching from industrial slag in the literature. This study has shown that high removal efficiencies can be obtained by an economical adsorbent.

Magnetic Multiwall Carbon Nanotube Decorated with Novel Functionalities: Synthesis and Application as Adsorbents for Lead Removal from Aqueous Medium

Water pollution is one of the major challenges facing modern society because of industrial development and urban growth. This study is directed towards assessing the use of multiwall carbon nanotube, after derivatization and magnetization, as a new and renewable absorbent, to remove toxic metal ions from waste streams. The adsorbents were prepared by, first oxidation of multiwall carbon nanotube, then derivatizing the oxidized product with hydroxyl amine, hydrazine and amino acid. The adsorbents were characterized by various techniques. The adsorption efficiency of the multiwall carbon nanotube adsorbents toward Pb(II) was investigated. The effect of adsorbent’s dose, temperature, pH, and time on the adsorption efficiency were studied and the adsorption parameters that gave the highest efficiency were determined. The derivatives have unique coordination sites that included amine, hydroxyl, and carboxyl groups, which are excellent chelating agents for metal ions. The thermodynamic and kinetic results analysis results indicated spontaneous adsorption of Pb(II) by the multiwall carbon nanotube adsorbents at room temperature. The adsorption process followed pseudo-second-order and Langmuir isotherm model. The adsorbents were regenerated using 0.1 N HCl.

Current advancement and future prospect of biosorbents for bioremediation

The increasing use of heavy metals, synthetic dyes and pesticides is a major environmental concern. Wastewaters containing heavy metals and dyes, extensively released from small and large scale industries enter excessively into food chains resulting in mutagenesis, carcinogenicity and serious health impairments in living systems. The arrays of technologies are implemented to date to remediate both inorganic and organic contaminants from wastewaters. Among which, adsorption is the most attractive method as it employs eco-friendly, sustainable and cost-effective biomaterials. Use of bioadsorbents is advantageous over the conventional adsorbents. Clay, chitin, peat, microbial biomass and agricultural wastes are commonly used bioadsorbants. These bioadsorbents are extensively used for elimination of dyes, heavy metals, adsorption of toxic industrial effluents, removal of fertilizers/pesticides, atmospheric pollutants and nuclear waste from the environment. The current review presents state of the art knowledge on various types of biosorbents, their uses, and mechanism of action. Various strategies to enhance the efficiency of bioadsorbents and physicochemical conditions to remediate dyes and heavy metals from waste streams are also incorporated in this review. Use of nano-bioadsorbents in industries to minimize the hazardous effect of solid and liquid waste has also been discussed.

Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review

The shortage of water resources and increasingly serious water pollution have driven the development of high-efficiency water treatment technology. Among a variety of technologies, adsorption is widely used in environmental remediation. As a class of typical adsorbents, metal oxides have been developed for a long time and continued to attract widespread attention, since they have unique physicochemical properties, including abundant surface active sites, high chemical stability, and adjustable shape and size. In this review, the basic principles of the adsorption process will be first elucidated, including affecting factors, evaluation index, adsorption mechanisms, and common kinetic and isotherm models. Then, the adsorption properties of several typical metal oxides, and key parameters affecting the adsorption performance such as particle/pore size, morphology, functionalization and modification, supports and calcination temperature will be discussed, as well as their application in the removal of various inorganic and organic contaminants. In addition, desorption and recycling of the spent adsorbent are summarized. Finally, the future development of metal oxide based adsorbents is also discussed.

Review of post-combustion carbon dioxide capture technologies using activated carbon

Carbon dioxide (CO₂) is the largest anthropogenic greenhouse gas (GHG) on the planet contributing to the global warming. Currently, there are three capture technologies of trapping CO₂ from the flue gas and they are pre-combustion, post-combustion and oxy-fuel combustion. Among these, the post-combustion is widely popular as it can be retrofitted for a short to medium term without encountering any significant technology risks or changes. Activated carbon is widely used as a universal separation medium with series of advantages compared to the first generation capture processes based on amine-based scrubbing which are inherently energy intensive. The goal of this review is to elucidate the three CO₂ capture technologies with a focus on the use of activated carbon (AC) as an adsorbent for post-combustion anthropogenic CO₂ flue gas capture prior to emission to atmosphere. Furthermore, this coherent review summarizes the recent ongoing research on the preparation of activated carbon from various sources to provide a profound understanding on the current progress to highlight the challenges of the CO₂ mitigation efforts along with the mathematical modeling of CO₂ capture. AC is widely seen as a universal adsorbent due to its unique properties such as high surface area and porous texture. Other applications of AC in the removal of contaminants from flue gas, heavy metal and organic compounds, as a catalyst and catalyst support and in the electronics and electroplating industry are also discussed in this study.

Synthesis of activated carbon from biowaste of fir bark for methylene blue removal

Activated carbon (AC) was successfully prepared from low-cost forestry fir bark (FB) waste using KOH activation method. Morphology and texture properties of ACFB were studied by scanning and high-resolution transmission electron microscopies (SEM and HRTEM), respectively. The resulting fir bark-based activated carbon (ACFB) demonstrated high surface area (1552 m2 g-1) and pore volume (0.84 cm3 g-1), both of which reflect excellent potential adsorption properties of ACFB towards methylene blue (MB). The effect of various factors, such as pH, initial concentration, adsorbent content as well as adsorption duration, was studied individually. Adsorption isotherms of MB were fitted using all three nonlinear models (Freundlich, Langmuir and Tempkin). The best fitting of MB adsorption results was obtained using Freundlich and Temkin. Experimental results showed that kinetics of MB adsorption by our ACFB adsorbent followed pseudo-second-order model. The maximum adsorption capacity obtained was 330 mg g-1, which indicated that FB is an excellent raw material for low-cost production of AC suitable for cationic dye removal.

Waste-to-resources: Exploratory surface modification of sludge-based activated carbon by nitric acid for heavy metal adsorption

Sewage sludge has the potential to be utilised as a sorbent for dissolved pollutant removal. This study investigated metal removal efficiency of carbonised sewage sludges obtained via pyrolysis at 500 °C: biochar/carbonised sludge (CS), ZnCl₂-activated sludge-based active carbon (SBAC), and three SBACs modified by nitric acid at different concentration and temperature (MSBACs). Batch adsorption kinetic tests indicated that the Pb²⁺ adsorption equilibrated in <5 min. Efficiencies of these sludge-based sorbents for Pb²⁺ adsorption followed the order MSBAC > SBAC > CS. Metal leachabilities were low or negligible for the SBAC and MSBACs. A comparison of 5-min adsorption of the best-performing MSBAC with different sorbents indicates that performance followed the trend MSBAC > grundite (illite) > zeolite (clinoptilolite) > commercial activated carbon (CAC) > kaolinite > perlite. Furthermore, MSBAC achieved 98.9%, 42.6%, and 34.6% removal of Cu, Zn, and Al, respectively, from spiked natural acid rock drainage in <5 min. The modified sludge-based activated carbon is an effective and sustainable sorbent for removing metals from aqueous environments.

Novel Carbon Paper@Magnesium Silicate Composite Porous Films: Design, Fabrication, and Adsorption Behavior for Heavy Metal Ions in Aqueous Solution

It is of great and increasing interest to explore porous adsorption films to reduce heavy metal ions in aqueous solution. Here, we for the first time fabricated carbon paper@magnesium silicate (CP@MS) composite films for the high-efficiency removal of Zn²⁺ and Cu²⁺ by a solid-phase transformation from hydromagnesite-coated CP (CP@MCH) precursor film in a hydrothermal route and detailedly examined adsorption process for Zn²⁺ and Cu²⁺ as well as the adsorption mechanism. The suitable initial pH range is beyond 4.0 for the adsorption of the CP@MS to remove Zn²⁺ under the investigated conditions, and the adsorption capacity is mainly up to the pore size of the porous film. The composite film exhibits excellent adsorption capacity for both of Zn²⁺ and Cu²⁺ with the corresponding maximum adsorption quantity of 198.0 mg g^-1 for Zn²⁺ and 113.5 mg g^-1 for Cu²⁺, which are advantageous over most of those reported in the literature. Furthermore, the adsorption behavior of the CP@MS film follows the pseudo-second-order kinetic model and the Langmuir adsorption equation for Zn²⁺ with the cation-exchange mechanism. Particularly, the CP@MS film shows promising practical applications for the removal of heavy metal ions in water by an adsorption-filtration system.

Adsorption of hexavalent chromium by activated carbon obtained from a waste lignocellulosic material (Ziziphus jujuba cores): Kinetic, equilibrium, and thermodynamic study

In aqueous solutions, hexavalent chromium Cr(VI) was successfully removed by activated carbon “ Z. jujuba rubidium carbonate-activated carbon” obtained from waste lignocellulosic material ( Ziziphus jujuba cores). Rubidium carbonate was used to prepare Z. jujuba rubidium carbonate-activated carbon by chemical activation using a 1:1 w/w ratio. Our results indicate that the obtained surface area of the activated carbon was equal to 608.31 m2/g. The adsorption study of Cr(VI) was investigated under batch conditions at constant stirring speed (220 r/min). Factors such as pH (1–6), temperature (20–40°C), adsorbent concentration (0.5–3 g/l), and initial Cr(VI) concentration (50–500 mg/l) were all studied to attain the maximum removal efficiency. Prior to the adsorption process, the morphology, elementary composition, and loss mass of activated carbon were characterized using scanning electron microscopy, X-ray fluorescence spectrometry, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Fourier transform infrared analysis of the adsorbent demonstrated the presence of key functional groups associated with the adsorption phenomenon such as those of hydroxyl and aromatic groups. The obtained results showed that the optimal conditions for a maximum adsorption efficiency are 2 for pH, 1 g/l for activated carbon dosage and 100 mg/l for Cr(VI) concentration. The removal percentage increased from 27.2 to 62.08%. The kinetic sorption was described by a pseudo-second-order kinetic equation ( R2 ≈ 0.995). The Tóth ( R2 = 0.997) and Elovich models were best to explain the sorption phenomenon. Thermodynamic studies showed that the adsorption of Cr(VI) onto activated carbon was feasible, spontaneous, and endothermic at 20–40°C. This novel Z. jujuba rubidium carbonate-activated carbon derived from Z. jujuba core has been found to be effective for the removal of Cr(VI) and not harmful to the ecosystem.

Fabrication of mesoporous magnesium oxide nanosheets using magnesium powder and their excellent adsorption of Ni (II)

Mesoporous MgO nanosheets with a high adsorption rate and excellent adsorption capacity for removing Ni (II) were successfully synthesized by a hydrothermal and annealing method. The Mg(OH)₂ was first synthesized by a hydrothermal process using magnesium powder as the starting material. MgO was then obtained by annealing the as-prepared Mg(OH)₂ at 450°C. The advantage of the magnesium powder as the starting material is it slowly generated Mg²⁺. Thus, the low centration of Mg²⁺ guaranteed a slow rate of forming Mg(OH)₂, which benefited with a mesoporous structure. The effect of the hydrothermal time on the structure and adsorption performance was studied. The results showed that the MgO synthesized for 4h had the highest adsorption performance of 2217mg/g and the highest adsorption rate, which resulted in an efficient adsorption of 96% in 5min for Ni (II) with the concentration of 500mg/L.

The Adsorption of Pb, Zn, Cu, Ni, and Cd by Modified Ligand in a Single Component Aqueous Solution: Equilibrium, Kinetic, Thermodynamic, and Desorption Studies

In this investigation, an amino functionalized adsorbent was developed by grafting 4-aminobenzoic acid onto the backbone of cross-linked chitosan beads. The 3 sets of beads including chitosan (CX), glutaraldehyde cross-linked chitosan (CCX), and 4-aminobenzoic acid grafted cross-linked chitosan (FGCX) were characterized by FTIR, XRD, SEM, and TGA. The water content and amine concentration of FGCX were determined. The effect of adsorption parameters was studied and the optimum was used for further studies. Equilibrium data was obtained from the adsorption experiment carried out at different initial concentration; the data were applied in isotherm, thermodynamics, and kinetic studies. The Langmuir and Dubinin-Kaganer-Radushkevich (DKR) models were successful in describing the isotherm data for the considered metal ions while the Freundlich and Temkin model fit some of the considered metal ions. Pseudo-second-order and intraparticle model described the kinetic data quite well. Thermodynamic parameters such as Gibb's free energy change (ΔG^o ), enthalpy change (ΔH^o ), and entropy change (ΔS^o ) were calculated and the results showed that the adsorption of Pb, Cu, Ni, Zn, and Cd ions onto FGCX is spontaneous and endothermic in nature. Regeneration of the spent adsorbent was efficient for the considered metal ions.

Bioremediation of cadmium-contaminated water systems using intact and alkaline-treated alga (Hydrodictyon reticulatum) naturally grown in an ecosystem

Cadmium can enter water, soil, and food chain in amounts harmful to human health by industrial wastes. The use of intact and NaOH-treated dried algal tissues (Hydrodictyon reticulatum), a major ecosystem bio-component, for Cd removal from aqueous solutions was characterized. Cadmium biosorption was found to be dependent on solution pH, bioadsorbent dose, the interaction between pH and dose, contact time, and initial Cd concentration. The experimental results indicated that the biosorption performance of alkaline-treated algal tissues was better than that of intact tissues. The maximum biosorption capacities were 7.40 and 12.74 mg g^-1 for intact and alkaline-treated bioadsorbents, respectively, at optimum operating conditions. Biosorption reaches equilibrium after 24 and 240 minutes of contact, respectively, for alkaline-treated and intact bioadsorbents. Cadmium biosorption was best fitted to Langmuir isotherm model (R² ≈ 0.99) and the kinetic study obeyed the pseudo-second-order kinetic model, which suggests chemisorption as the rate-limiting step in the biosorption process. Alkaline-treated algal tissues can be used as a new material of low-cost bioadsorbent for continuous flow rate treatment systems.

Recovery of valuable metals from electronic scraps by clays and organo-clays: Study on bi-ionic model solutions

The demand of valuable metals, as precious metals and rare earths, is constantly increasing in the global market, as many and different technological applications exploit these materials because of their unique properties. Since natural resources are located just in focused areas, an interesting possibility could be the recovery of metals from Waste Electrical and Electronic Equipment (WEEE). The aim of this work is to evaluate the recovery potentialities of clays and organo-clay based systems towards the metals contained in the solutions of electronic scraps dissolved in strong acid, by preliminary tests on bi-ionic model solutions. Lanthanum has been chosen as representative of the rare earths while copper has been considered since it is by far the most used metal in electric and electronic equipment. The considered sorbents are a montmorillonitic clay and two polyamine based organo-clays. Uptake and release processes have been carried out in order to assess the performances of these solids and to evaluate the uptake and release mechanisms. The results showed that the cationic exchange is the prevailing mechanism in the case of pristine clay, while both coordinating effect due to amino groups and cationic exchange occur in the case of modified clays, respectively accounting for copper and lanthanum uptake. Furthermore the pH was found having a great influence in both the adsorption and desorption phenomena.

Released polysaccharides (RPS) from Cyanothece sp. CCY 0110 as biosorbent for heavy metals bioremediation: interactions between metals and RPS binding sites

Bioremediation of heavy metals using microorganisms can be advantageous compared to conventional physicochemical methods due to the use of renewable resources and efficiencies of removal particularly cations at low concentrations. In this context, cyanobacteria/cyanobacterial extracellular polymeric substances (EPS) emerge as a valid alternative due to the anionic nature and particular composition of these polymers. In this work, various culture fractions of the unicellular cyanobacterium Cyanothece sp. CCY 0110 were employed in bioremoval assays using three of the most common heavy metal pollutants in water bodies-copper, cadmium, and lead-separately or in combined systems. Our study showed that the released polysaccharides (RPS) were the most efficient fraction, removing the metal(s) by biosorption. Therefore, this polymer was subsequently used to evaluate the interactions between the metals/RPS binding sites using SEM-EDX, ICP-OES, and FTIR. Acid and basic pretreatments applied to the polymer further improve the process efficiency, and the exposure to an alkaline solution seems to alter the RPS conformation. The differences observed in the specific metal bioremoval seem to be mainly due to the RPS organic functional groups available, mainly carboxyl and hydroxyl, than to an ion exchange mechanism. Considering that Cyanothece is a highly efficient RPS-producer and that RPS can be easily separated from the culture, immobilized or confined, this polymer can be advantageous for the establishment/improvement of heavy metal removal systems.

Sulfonated Magnetic Nanocomposite Based on Reactive PGMA-MAn Copolymer@Fe3O4 Nanoparticles: Effective Removal of Cu(II) Ions from Aqueous Solutions

Chelating magnetic nanocomposites have been considered as suitable materials for removal of heavy metal ions for water treatment. In this work poly(glycidyl methacrylate-maleic anhydride) copolymer (PGMA-MAn) is modified with 4-aminobenzenesulfonic acid (ABSAc) and subsequently the product reacted with modified Fe3O4 nanoparticles and 1,2-ethanedithiol (EDT) in the presence of ultrasonic irradiation for preparation of tridimensional chelating magnetic nanocomposite. Synthesized magnetic nanocomposite was characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), vibrating sample magnetometer (VSM), energy dispersive X-ray analysis (EDX), elemental mapping analysis (EMA), Brunauer-Emmett-Teller (BET), and thermal gravimetric analysis (TGA). The adsorption behavior of Cu(II) ions was investigated by synthesized nanocomposite in various parameters such as pH, contact time, metal ion concentration, and adsorbent dosage. The equilibrium distribution coefficient (kd) was determined and the findings prove that the kd value is approximately high in the case of all selected metal ions. The synthesized nanocomposite exhibited good tendency for removing Cu(II) ions from aqueous solutions even at an acidic pH.