Enhanced nitrogen removal from pharmaceutical wastewater using SBA-ANAMMOX process

Efficient nitrogen removal and robustness enhancement of a two-stage partial nitrification-anammox (PN/A) process with low sludge concentration for mature landfill leachate

The biological treatment system for high-strength wastewater, particularly landfill leachate, typically requires high sludge concentration to maintain nitrogen removal performance. However, it frequently causes an excessive accumulation of toxins in microbial metabolism, resulting in unstable performance during long-term operation. An efficient two-stage partial nitrification/anammox (PN/A) mature landfill leachate process with low sludge concentration was constructed by settling time reduction and Ca2+ addition. The ammonia removal rate reached 46.7 mg N/(L·h) in PN-SBR. Nitrosomonas (2.0%) was the sole genus responsible for partial nitrification. The influent NO2--N/NH4+-N of A-SBR was kept at 1.39, leading to a dynamic equilibrium of anammox and denitrification. Ca. Brocadia recovered fastest (0.32% → 1.8%) among the detected AnAOB genera. The process achieved NRE of 95.0% with effluent TIN of 37.6 mg/L (<40 mg/L). This research offered recommendations for the favorable operation of the two-stage PN/A mature landfill leachate treatment system with low sludge concentration.

Feasibility of a return-sludge nursery concept for mainstream anammox biostimulation: creating optimal conditions for anammox to recover and grow in a parallel tank

To overcome limiting anammox activity, a return-sludge nursery concept is proposed. This concept blends reject water treated with partial nitritation with mainstream effluent to increase the temperature, N levels, and EC of the anammox nursery reactor, which sludge periodically passes through the return sludge line of the mainstream system. Various nursery frequencies were tested in two 2.5 L reactors, including 0.5-2 days of nursery treatment per 3.5-14 days of the total operation. Bioreactor experiments showed that nursery increased nitrogen removal rates during mainstream operation by 33-38%. The increased anammox activity can be partly (35-60%) explained by higher temperatures. Elevated EC, higher nitrogen concentrations, and a putative synergy and/or unknown factor were responsible for 15-16%, 12-14%, and 10-36%, respectively. A relatively stable microbial community dominated by "Candidatus Brocadia" was observed. This new concept boosted activity and sludge growth, which may facilitate mainstream anammox implementations based on partial nitritation/anammox or partial nitrification/denitratation/anammox.

Conductive carrier promotes synchronous biofilm formation and granulation of anammox bacteria

The extracellular electron transfer capability of some anaerobic ammonium oxidation (anammox) bacteria was confirmed in recent years. However, the effect of conductive carriers on the synchronous formation of anammox biofilm and granules is rarely reported. Anammox biofilm and granules with compact and stable structures accelerate the initiation and enhance the stability of the anammox process. In this study, we found that the conductive carbon fiber brush (CB) carrier promoted synchronous biofilm formation and granulation of anammox bacteria in the internal circulation immobilized blanket (ICIB) reactor. Compared with polyurethane sponge and zeolite carrier, the ICIB reactor packed with CB carrier can be operated under the highest total nitrogen loading rate of 6.53 kg-N/(m³·d) and maintain the effluents NH₄⁺-N and NO₂^--N at less than 1 mM. The volatile suspended solids concentration in the ICIB reactor packed with conductive carrier increased from 5.17 ± 0.40 g/L of inoculum sludge to 24.24 ± 1.20 g/L of biofilm, and the average particle size of granules increased from 222.09 µm to 879.80 µm in 150 days. Fluorescence in situ hybridization analysis showed that anammox bacteria prevailed in the biofilm and granules. The analysis of extracellular polymeric substances indicated that protein and humic acid-like substances played an important role in the formation of anammox biofilm and granules. Microbiome analysis showed that the relative abundance of Candidatus Jettenia was increased from 0.18% to 38.15% in the biofilm from CB carrier during start-up stage. This study provides a strategy for rapid anammox biofilm and granules enrichment and carrier selection of anammox process.

Large-scale (500 kg N/day) two-stage partial nitritation/anammox (PN/A) process for liquid-ammonia mercerization wastewater treatment: Rapid start-up and long-term operational performance

The nitrogen pollution control of liquid-ammonia mercerization wastewater (LMWW) is one of the typical obstacle restricting the sustainability of textile industry. In this study, a 500 kg N/day two-stage partial nitritation/anammox (PN/A) process containing PN reactor filled with zeolite and biofilm anammox reactors was successfully started up in 45 days and operated stably with high shock resistance over one year for LMWW treatment. The large-scale process achieved an average ammonium removal efficiency (94.3 ± 2.3%), total nitrogen removal efficiency (89.4 ± 2.7%) and nitrogen removal rate (1.003 ± 0.386 kg N/m³/day) during one year engineering operation. Simultaneous denitrification was revealed by the contribution of 5.2% total nitrogen removed. High-throughput sequencing results showed that Nitrosomonas was the most dominant genus in PN reactor, and Ca. Anammoxoglobus and Ca. Kuenenia were the functional bacteria for nitrogen removal in anammox reactors. Compared to traditional nitrification-denitrification process, the large-scale process reduced a total operational cost of 46.03 CNY/kg N for LMWW. This study revealed the proposed process was quite reliable with fast start-up and high impact resistance to overcome the obstacle of nitrogen pollution control for LMWW economically and conducive to the sustainable development for textile industry.

The organics-mediated microbial dynamics and mixotrophic metabolisms in anammox consortia under micro-aerobic conditions

The engineering applications of mainstream anaerobic ammonium oxidation (anammox) have raised increasing attention due to its energy-efficient, however, the organics-mediated microbial dynamics and mixotrophic metabolisms in anammox consortia under micro-aerobic conditions are still elusive. Here, the response of the anammox process to sodium acetate and glucose at a C/N ratio ranging from 0 to 0.5 was investigated under micro-aerobic conditions, respectively. Results showed that the additional glucose could promote the nitrogen removal efficiency (NRE) and nitrogen removal rate (NRR) of anammox processes at a low C/N ratio (0.3), representing 84.00% and 0.53 N kg·m^-3·d^-1. The introduced organics could regulate the diversity of the microbial community and simplify the microbial relationship in anammox consortia. Anammox could not benefit from the introduced sodium acetate, while glucose could effectively enhance the anammox activity and microbial interactions in anammox consortia. Glucose might also stimulate the mixotrophic mechanism of Ca. Kuenenia, further promotes the proliferation of anammox sludge under micro-aerobic conditions. This study reveals that glucose could positively mediate microbial interactions and mixotrophic metabolism in anammox consortia under micro-aerobic conditions, which raises a new horizon for the proliferation of anammox sludge for mainstream engineering applications.

Integrated thermal hydrolysis pretreated anaerobic digestion centrate and municipal wastewater treatment via partial nitritation/anammox process: A promising approach to alleviate inhibitory effects and enhance nitrogen removal

Two-stage Partial nitritation/Anammox (PN/A) was firstly performed for recalcitrant organics (RO)-rich thermal hydrolysis pretreated anaerobic digestion (THP-AD) centrate treatment with municipal wastewater (MW) as co-substrate. Results indicated the inhibitory effects of RO was alleviated and high nitrate issue in PN/A effluent was addressed by cotreatment strategy. Stable PN with nitrite accumulation ratio of 95% and N removal efficiency of 97.1% were well maintained at MW of 80%. Nevertheless, nitrate accumulation and anammox activity loss were observed with lowering MW proportion owing to the weakened denitrification activity and aggravated inhibitory effect. Microbial analysis revealed Nitrosomonas was the major ammonium oxidizing bacteria and the ideal PN performance was due to the effective out-selection of nitrite oxidizing bacteria. Candidatus Kuenenia was identified as the primary bacteria for nitrogen removal (82.7%), and the controlled abundance of heterotrophic denitrifiers in anammox system ensured the enhanced nitrogen removal regardless of high COD loading from THP-AD centrate.

Organics alleviate the inhibition of sulfate on ANAMMOX sludge

Anaerobic ammonium oxidation (Anammox) was an innovative process for nitrogen removal. In this study, the influence of sulfate in different concentrations (100, 200, 300, and 400 mg L^-1) on Anammox process were investigated in nine identical sequential batch reactors, four of which were extra supplied for organics, to study the combined effect. The results indicated the obvious inhibition by sulfate which decreased the total nitrogen removal efficiency (TNRE) to 84.1%, 81.2%, 81.2%, and 72.5%, from the control results as 91.9%. Whereas, the organics addition alleviated the inhibitory effect, through consuming the oxygen in influent, promoting the secretion of protein, and inducing the denitrifying bacteria, for which the sulfate only slightly decreased the TNRE to 89.0%, 83.7%, 83.6%, and 75.7%, respectively. Candidatus Kuenenia and Denitratisoma could coexist in Anammox system and cooperatively contribute to the nitrogen removal, when treating the nitrogenous wastewater contains both sulfate and organics.

A review on characterizing the metabolite property of anammox sludge by spectroscopy

As one of the most promising autotrophic biological nitrogen removal technology, anaerobic ammonia oxidation (anammox) has gained intense attention for the past decades and several full-scale facilities have been implemented worldwide. However, anammox bacteria are easily affected by disturbed external environmental factors, which commonly leads to the fluctuations in reactor performance. The response of anammox sludge to external stress results in changes in components and structural characteristics of intracellular and extracellular polymer substances. Real-time and convenient spectral analysis of anammox sludge metabolites can give early warning of performance deterioration under external stresses, which is of great significance to the stable operation of bioreactor. This review summarized the research progress on characterizing the intracellular and extracellular metabolites of anammox sludge through spectroscopic techniques. The correlation between anammox sludge activity and its key metabolites was analyzed. Also, the limitations and future prospects of applying spectral analytical techniques for anammox bioreactor monitoring were discussed and outlooked. This review may provide valuable information for both scientific study and engineering application of anammox based nitrogen removal technology.

Residual β-lactam antibiotics and ecotoxicity to Vibrio fischeri, Daphnia magna of pharmaceutical wastewater in the treatment process

The discharge of pharmaceutical wastewater introduces numerous pollutants into the environment, and their pollution level reduction has aroused extensive concern. This study investigated the variation in residual antibiotics and ecotoxicity to two nutritional-level model organisms in the pharmaceutical wastewater treatment process (PWTP). The wastewater in the equalization tank contained massive organic matters (2.9-18.7 times higher than the permissible values in GB21903-2008) and antibiotics (310.88 μg/L), posing extremely toxic effects to Vibrio fischeri (V. fischeri) and Daphnia magna (D. magna). The biological anaerobic/aerobic treatment units contributed the most to the reduction of antibiotics and the ecotoxicity to both organisms, with the removal rates of 72% and > 90%, respectively. The ecotoxicity of pharmaceutical wastewater was strongly and positively correlated with the residual antibiotics, amoxicillin, cephalexin, ammonia nitrogen, and total phosphorus (P < 0.05). However, the detected amounts of amoxicillin and cephalexin were approximately 10⁵ times lower than the predicted no-effect concentrations of amoxicillin and cephalexin to V. fischeri and D. magna in freshwater, which implied the joint ecotoxicity posed by multicomponent mixtures, such as the residual antibiotics and organic toxic substances, rather than the specific residual antibiotics. This study provides a better understanding of the variations and residual levels of pollutants in PWTPs, including their ecotoxicity risk to the aquatic environment, highlighting the need to optimize pharmaceutical wastewater treatment technologies.

Effects of sludge morphology on the anammox process: Analysis from the perspectives of performance, structure, and microbial community

The nitrogen removal characteristics, physicochemical properties, and microbial community composition of four different anaerobic ammonium oxidation (anammox) sludge morphologies were investigated. The morphologies considered in this study, namely suspended sludge (Rs), biofilm (Rm), granular sludge (Rg), and encapsulated biomass (Re), were prepared from floc sludge. The results show that Re exhibited the maximum anammox activity, followed by Rg, Rm, and Rs. Additionally, the anammox contribution rate was higher in Rg and Re. The higher extracellular polymer content in Rg promoted sludge accumulation, and tryptophan was observed in Rm and Rg, which was replaced by humic acids in Rs. Re showed the largest specific surface area, hydrophobicity and strength, and its good structure ensured enrichment of anammox bacteria (AnAOB). In terms of the microbial community, the functional bacterium Candidatus Kuenenia accounted for the highest proportion in Rm (39.27%), but the presence of both anaerobic and aerobic regions led to increased community complexity with more nitrifying bacteria. In contrast, Rg and Re had a more specific microbial community. In addition, denitrifying bacteria tended to grow in Rs, while nitrifying bacteria were retained in Rm. The AnAOB were more likely to be enriched in sludge aggregates (both Rm and Rg) and carriers (Re). Through correlation analysis, the potential relationship involving bacterial flora evolution of each sample was clarified. Finally, the structural models of different morphologies of sludge were proposed. This study deepens the understanding of various anammox sludge morphologies as well as provides useful information for the cultivation of AnAOB and further application of anammox.

Effects of pharmaceuticals on the nitrogen cycle in water and soil: a review

The effects of pharmaceuticals on the nitrogen cycle in water and soil have recently become an increasingly important issue for environmental research. However, a few studies have investigated the direct effects of pharmaceuticals on the nitrogen cycle in water and soil. Pharmaceuticals can contribute to inhibition and stimulation of nitrogen cycle processes in the environment. Some pharmaceuticals have no observable effect on the nitrogen cycle in water and soil while others appeared to inhibit or stimulate for it. This review reports on the most recent evidence of effects of pharmaceuticals on the nitrogen cycle processes by examination of the potential impact of pharmaceuticals on nitrogen fixation, nitrification, ammonification, denitrification, and anammox. Research studies have identified pharmaceuticals that can either inhibit or stimulate nitrification, ammonification, denitrification, and anammox. Among these, amoxicillin, chlortetracycline, ciprofloxacin, clarithromycin, enrofloxacin, erythromycin, narasin, norfloxacin, and sulfamethazine had the most significant effects on nitrogen cycle processes. This review also clearly demonstrates that some nitrogen transformation processes such as nitrification show much higher sensitivity to the presence of pharmaceuticals than other nitrogen transformations or flows such as mineralization or ammonia volatilization. We conclude by suggesting that future studies take a more comprehensive approach to report on pharmaceuticals' impact on the nitrogen cycle process.

Feasibility of partial-denitrification/ anammox for pharmaceutical wastewater treatment in a hybrid biofilm reactor

Biological nitrogen removal from pharmaceutical wastewater has drawn increasing attention due to biotoxicity and inhibition. In this study, for the first time, a novel approach integrating partial-denitrification with anaerobic ammonia oxidation (PD/A) in a sequencing biofilm batch reactor (SBBR) was proposed and demonstrated to be efficient to treat the bismuth nitrate and bismuth potassium citrate manufacturing wastewater, containing ammonia (NH₄⁺-N) and nitrate (NO₃^--N) of 6300±50 mg L ^- 1 and 15,300±50 mg L ^- 1. The maximum anammox activity was found at the shock effect of influent total nitrogen (TN) of 100 mg L ^- 1 with NO₃^--N/NH₄⁺-N of 1.0. Long-term operation demonstrated that the PD/A biofilm was developed rapidly after 30 days using synthetic influent, with TN removal efficiency increasing from 40.9% to 80.8%. Significantly, the key bacteria for PD/A had high tolerance and adapted rapidly to pharmaceutical wastewater, achieving a relatively stable TN removal efficiency of 81.2% with influent NH₄⁺-N and NO₃^--N was 77.9 ± 2.6 and 104.1 ± 4.4 mg L ^- 1 at a relatively low COD/NO₃^--N of 2.6. Anammox pathway contributed to TN removal reached 83.6%. Significant increase of loosely-bound extracellular polymeric substances was obtained with increasing protein of 3-turn helices structure as response to the inhibitory condition. High-throughput sequencing analysis revealed that the functional genus Thauera was highly enriched in both biofilms (9.5%→43.6%) and suspended biomass (15.5%→57.5%), which played a key role in high NO₂^--N accumulation. While the anammox bacteria decreasing from 7.8% to 1.6% in biofilm, and from 1.8% decreased to 0.1% in the suspended sludge. Overall, this study provides a new method of high-strength pharmaceutical wastewater treatment with low energy consumption and operation cost, as well as a satisfactory efficiency.

Combining electrochemical nitrate reduction and anammox for treatment of nitrate-rich wastewater: A short review

Treatment of nitrate-rich wastewater is important but challenging for the conventional biological denitrification process. Here, we propose combining the electrochemical reduction and anaerobic ammonium oxidation (anammox) processes together for treatment of nitrate-rich wastewater. This article reviews the mechanism and current research status of electrochemical reduction of nitrate to ammonium as well as the mechanism and applicability of the anammox process. This article discusses the principles, superiorities and challenges of this combined process. The feasibility of the combined process depends on the efficiency of electrochemical nitrate reduction to ammonium and the conditions in the anammox process to use the reduced ammonium as the substrate to achieve deep nitrogen removal. The article provides a feasible strategy for using the electrochemical reduction and anammox combined process to treat nitrate-rich wastewater.

Adaptation and evolution of freshwater Anammox communities treating saline/brackish wastewater

The most common way to apply Anammox for saline wastewater treatment is via salt adaptation of freshwater Anammox bacteria (FAB). To better apply this process in practice, it's essential to understand the salt adaptation process of FBA, as well as the underlying mechanisms. This study investigated the long-term salt adaptation process of a fixed-film FAB culture in three reactors (namely R1-R3), under salinities of 2, 8, and 12 NaCl g/L, correspondingly. All three reactors were under stable operation and achieved 80-90% total inorganic nitrogen removal efficiency throughout the 425-day operation period. R1 servers as a blank control, based on the clear microbial community shifts in R2 and R3, the operation period was divided into 2 phases. During Phase 1, all FAB in the three reactors belonged to Ca. Brocadia sp.. The Anammox activity (AA) and the ratio of nitrite/ammonium (NO₂^--N/NH₄⁺-N) consumption in R2 and R3 decreased with the increase of salinity and did not recover to the initial levels. During Phase 2, the relative abundance of Ca. Kuenenia sp. in R2 and R3 increased from nearly 0 to about 60 and 77%, respectively. With the growth of Ca. Kuenenia sp., the AA and stoichiometry of R2 and R3 gradually recovered. AA of R2 and R3 both reached 1.0 g NH₄⁺-N/L/day at the end of this phase, which was about 80% of that in R1. These results indicated that the salt adaptation of FAB culture was achieved by species shift from a low salt-tolerance one to a high salt-tolerance one.

How anammox responds to the emerging contaminants: Status and mechanisms

Numerous researches have been carried out to study the effects of emerging contaminants in wastewater, such as antibiotics, nanomaterials, heavy metals, and microplastics, on the anammox process. However, they are fragmented and difficult to provide a comprehensive understanding of their effects on reactor performance and the metabolic mechanisms in anammox bacteria. Therefore, this paper overviews the effects on anammox processes by the introduced emerging contaminants in the past years to fulfill such knowledge gaps that affect our perception of the inhibitory mechanisms and limit the optimization of the anammox process. In detail, their effects on anammox processes from the aspects of reactor performance, microbial community, antibiotic resistance genes (ARGs), and functional genes related to anammox and nitrogen transformation in anammox consortia are summarized. Furthermore, the metabolic mechanisms causing the cell death of anammox bacteria, such as induction of reactive oxygen species, limitation of substrates diffusion, and membrane binding are proposed. By offering this review, the remaining research gaps are identified, and the potential metabolic mechanisms in anammox consortia are highlighted.

Impacts of organics on the microbial ecology of wastewater anammox processes: Recent advances and meta-analysis

Anaerobic ammonium oxidation (anammox) represents a promising technology for wastewater nitrogen removal. Organics management is critical to achieving efficient and stable performance of anammox or integrated processes, e.g., denitratation-anammox. The aim of this systematic review is to synthesize the state-of-the-art knowledge on the multifaceted impacts of organics on wastewater anammox community structure and function. Both exogenous and endogenous organics are discussed with respect to their effects on the biofilm/granule structure and function, as well as the interactions between anammox bacteria (AnAOB) and a broad range of coexisting functional groups. A global core community consisting of 19 taxa is identified and a co-occurrence network is constructed by meta-analysis on the 16S rDNA sequences of 149 wastewater anammox samples. Correlations between core taxa, keystone taxa, and environmental factors, including COD, nitrogen loading rate (NLR) and C/N ratio are obtained. This review provides a holistic understanding of the microbial responses to different origins and types of organics in wastewater anammox reactors, which will facilitate the design and operation of more efficient anammox-based wastewater nitrogen removal process.

Role of Ammonia Oxidation in Organic Micropollutant Transformation during Wastewater Treatment: Insights from Molecular, Cellular, and Community Level Observations

Organic micropollutants (OMPs) are a threat to aquatic environments, and wastewater treatment plants may act as a source or a barrier of OMPs entering the environment. Understanding the fate of OMPs in wastewater treatment processes is needed to establish efficient OMP removal strategies. Enhanced OMP biotransformation has been documented during biological nitrogen removal and has been attributed to the cometabolic activity of ammonia-oxidizing bacteria (AOB) and, specifically, to the ammonia monooxygenase (AMO) enzyme. Yet, the exact mechanisms of OMP biotransformation are often unknown. This critical review aims to fundamentally and quantitatively evaluate the role of ammonia oxidation in OMP biotransformation during wastewater treatment processes. OMPs can be transformed by AOB via direct and indirect enzymatic reactions: AMO directly transforms OMPs primarily via hydroxylation, while biologically produced reactive nitrogen species (hydroxylamine (NH₂OH), nitrite (NO₂^-), and nitric oxide (NO)) can chemically transform OMPs through nitration, hydroxylation, and deamination and can contribute significantly to the observed OMP transformations. OMPs containing alkyl, aliphatic hydroxyl, ether, and sulfide functional groups as well as substituted aromatic rings and aromatic primary amines can be biotransformed by AMO, while OMPs containing alkyl groups, phenols, secondary amines, and aromatic primary amines can undergo abiotic transformations mediated by reactive nitrogen species. Higher OMP biotransformation efficiencies and rates are obtained in AOB-dominant microbial communities, especially in autotrophic reactors performing nitrification or nitritation, than in non-AOB-dominant microbial communities. The biotransformations of OMPs in wastewater treatment systems can often be linked to ammonium (NH₄⁺) removal following two central lines of evidence: (i) Similar transformation products (i.e., hydroxylated, nitrated, and desaminated TPs) are detected in wastewater treatment systems as in AOB pure cultures. (ii) Consistency in OMP biotransformation (r_bio, μmol/g VSS/d) to NH₄⁺ removal (r_NH4+, mol/g VSS/d) rate ratios (r_bio/r_NH4+) is observed for individual OMPs across different systems with similar r_NH4+ and AOB abundances. In this review, we conclude that AOB are the main drivers of OMP biotransformation during wastewater treatment processes. The importance of biologically driven abiotic OMP transformation is quantitatively assessed, and functional groups susceptible to transformations by AMO and reactive nitrogen species are systematically classified. This critical review will improve the prediction of OMP transformation and facilitate the design of efficient OMP removal strategies during wastewater treatment.

N-acyl-l-homoserine lactones release and microbial community changes in response to operation temperature in an anammox biofilm reactor

A 1 L lab-scale anaerobic ammonium oxidation (anammox) biofilm reactor with nitrogen loading rate of 0.11 g/L d was run for 110 days with the operation temperature declining from 36 °C to 15 °C. The total inorganic nitrogen removal efficiency showed a reduction from 80% to 66%, when the temperature declined from 36 °C to 15 °C. N-acyl-_l-homoserine lactones (AHLs) concentrations, especially C8-HSL and C6-HSL, declined in both water and biomass phases, and this decline indicated that the quorum sensing weakened. Microbial community analysis revealed that Candidatus Kuenenia was the predominant anammox bacteria during the entire operating period. The abundance of Candidatus Kuenenia increased from 1.43% to 22.89% when the temperature decreasing from 36 °C to 15 °C. The correlation between microbial genus and AHLs was complicated. Overall, the temperature decrease weakened the quorum sensing so that the nitrogen removal performance deteriorated, and increasing the anammox activity might be an efficient way to improve performance.

A critical review on the effects of antibiotics on anammox process in wastewater

Anaerobic ammonium oxidation (anammox) has recently become of significant interest due to its capability for cost-effective nitrogen elimination from wastewater. However, anaerobic ammonia-oxidizing bacteria (AnAOB) are sensitive to environmental changes and toxic substances. In particular, the presence of antibiotics in wastewater, which is considered unfavorable to the anammox process, has become a growing concern. Therefore, it is necessary to evaluate the effects of these inhibitors to acquire information on the applicability of the anammox process. Hence, this review summarizes our knowledge of the effects of commonly detected antibiotics in water matrices, including fluoroquinolone, macrolide, β-lactam, chloramphenicol, tetracycline, sulfonamide, glycopeptide, and aminoglycoside, on the anammox process. According to the literature, the presence of antibiotics in wastewater could partially or completely inhibit anammox reactions, in which antibiotics targeting protein synthesis or DNA replication (excluding aminoglycoside) were the most effective against the AnAOB strains.

Understanding of signaling molecule controlled anammox through regulating C/N ratio

Anammox as a novel biological process in natural nitrogen cycle has been introduced into wastewater treatment process. However, the regulation mechanism of anammox metabolism remained to be investigated. In this study, the specific quorum sensing (QS) signaling molecules for mediating anammox were identified in anammox activity tests. Anammox was valve-regulated by the collaboration of QS signaling molecules N-butyryl-homoserine lactone (C14-HSL) and N-(3-oxotetradecanoyl)-homoserine lactone (3-oxo-C14-HSL), and prompted with the C14-HSL/3-oxo-C14-HSL mole ratio above 1.0. Moreover, the ratio of chemical oxygen demand to total nitrogen (C/N) was identified as an effective regulator for the distribution of C14-HSL and 3-oxo-C14-HSL. An engineering method for control anammox through regulating C/N ratio was proposed and demonstrated based on the performance of two microaerobic reactors treating piggery wastewater and anammox activity tests. The discovery should be of great significance to understanding the social behaviors of anammox bacteria in organic wastewater treatment processes.

Removal Characteristics of Effluent Organic Matter (EfOM) in Pharmaceutical Tailwater by a Combined Coagulation and UV/O3 Process

A novel coagulation combined with UV/O3 process was employed to remove the effluent organic matter (EfOM) from a biotreated pharmaceutical wastewater for harmlessness. The removal behavior of EfOM by UV/O3 process was characterized by synchronous fluorescence spectroscopy (SFS) integrating two-dimensional correlation (2D-COS) and principal component analysis (PCA) technology. The highest dissolved organic carbon (DOC) and ratio of UV254 and DOC (SUVA) removal efficiency reached 55.8% and 68.7% by coagulation-UV/O3 process after 60 min oxidation, respectively. Five main components of pharmaceutical tail wastewater (PTW) were identified by SFS. Spectral analysis revealed that UV/O3 was selective for the removal of different fluorescent components, especially fulvic acid-like fluorescent (FLF) component and humus-like fluorescent (HLF) component. Synchronous fluorescence/UV-visible two-dimensional correlation spectra analysis showed that the degradation of organic matter occurred sequentially in the order of HLF, FLF, microbial humus-like fluorescence component (MHLF), tryptophan-like fluorescent component (TRLF), tyrosine-like fluorescent component (TYLF). The UV/O3 process removed 95.6% of HLF, 80.0% of FLF, 56.0% of TRLF, 50.8% of MHLF and 44.4% of TYLF. Therefore, the coagulation-UV/O3 process was proven to be an attractive way to reduce the environmental risks of PTW.

Technologies for biological removal and recovery of nitrogen from wastewater

Water contamination is a growing environmental issue. Several harmful effects on human health and the environment are attributed to nitrogen contamination of water sources. Consequently, many countries have strict regulations on nitrogen compound concentrations in wastewater effluents. Wastewater treatment is carried out using energy- and cost-intensive biological processes, which convert nitrogen compounds into innocuous dinitrogen gas. On the other hand, nitrogen is also an essential nutrient. Artificial fertilizers are produced by fixing dinitrogen gas from the atmosphere, in an energy-intensive chemical process. Ideally, we should be able to spend less energy and chemicals to remove nitrogen from wastewater and instead recover a fraction of it for use in fertilizers and similar applications. In this review, we present an overview of various technologies of biological nitrogen removal including nitrification, denitrification, anaerobic ammonium oxidation (anammox), as well as bioelectrochemical systems and microalgal growth for nitrogen recovery. We highlighted the nitrogen removal efficiency of these systems at different temperatures and operating conditions. The advantages, practical challenges, and potential for nitrogen recovery of different treatment methods are discussed.

Application of anammox within an integrated approach to sustainable food waste management and valorization

In this study, the anammox process was applied for the first time to the treatment of ammonium-rich liquid residues produced by the two-stage anaerobic digestion of food waste (2sAD-FW); such residues may represent a significant environmental issue if not properly managed. A granular anammox reactor was fed with a progressively increasing share of partially nitritated 2sAD-FW wastewater. An alternative operating strategy based on partial by-pass of the partial nitritation unit was tested, in order to regulate the influent NO₂/NH₄ molar ratio without chemical addition. High nitrogen removal efficiency (89 ± 1%) and negligible nitrite discharge rates were achieved, together with high nitrogen removal rate/nitrogen loading rate (NRR/NLR, 97 ± 1%) and stable specific anammox activity (0.42 ± 0.03 gN₂-N/gVSS d). The observed NH_4-removed/NO_2-removed/NO_3-produced molar ratio was in agreement with anammox stoichiometry, as confirmed by the low contribution (<5%) of denitrification to nitrogen removal. Moreover, the possibility of using digital color characterization of granular biomass as a novel, simple tool for the monitoring of anammox biomass enrichment and process performance was investigated under dynamic conditions, using real wastewater: changes in granule color correlated well with the increasing share of 2sAD-FW wastewater in the influent (R² = 83%), as well as with the decrease of anammox biomass abundance in the reactor (R² = 68%). The results suggest that anammox may be successfully integrated into a 2sAD-FW system, thus enhancing its environmental sustainability.

Evolution of microbial dynamics with the introduction of real seawater portions in a low-strength feeding anammox process

The salinity effect on anammox bacteria has been widely reported; however, rare studies describe the microbial dynamics of anammox-based process response to the introduction of real seawater at mainstream conditions. In this study, an anammox process at mainstream conditions without pre-enriching anammox bacteria was shifted to the feeds of a synthetic wastewater with a portion of seawater mixture. It achieved over 0.180 kg-N/(m³ day) of nitrogen removal rate with an additional seawater proportion of 20% in the influent. The bacterial biodiversity was significantly increased with the increase of seawater proportions. High relative abundance of anammox bacteria (34.24–39.92%) related to Ca. Brocadia was enriched and acclimated to the saline environment. However, the introduction of seawater caused the enrichment of nitrite-oxidizing Ca. Nitrospira, which was responsible for the deterioration of nitrogen removal efficiency. Possible adaptation metabolisms in anammox bacteria and other nitrogen transforming bacteria are discussed. These results highlight the importance of microbial diversity for anammox process under the saline environments of 20% and 40% seawater composition.

Application of the Anammox in China-A Review

Anaerobic ammonia oxidation (anammox) has been one of the most innovative discoveries for the treatment of wastewater with high ammonia nitrogen concentrations. The process has significant advantages for energy saving and sludge reduction, also capital costs and greenhouse gases emissions are reduced. Recently, the use of anammox has rapidly become mainstream in China. This study reviews the engineering applications of the anammox process in China, including various anammox-based technologies, selection of anammox reactors and attempts to apply them to different wastewater treatment plants. This review discusses the control and implementation of stable reactor operation and analyzes challenges facing mainstream anammox applications. Finally, a unique and novel perspective on the development and application of anammox in China is presented.

Simultaneous Ammonium oxidation denitrifying (SAD) in an innovative three-stage process for energy-efficient mature landfill leachate treatment with external sludge reduction

High-loaded ammonia and low-strength organics mature landfill leachate is not effectively treated by conventional biological processes. Herein, an innovative solution was proposed using a three-stage Simultaneous Ammonium oxidation Denitrifying (SAD) process. Firstly, ammonia (1760 ± 126 mg N/L) in wastewater was oxidized to nitrite in a partial nitrification sequencing batch reactor (PN-SBR). Next, 93% PN-SBR effluent and concentrated external waste activated sludge (WAS; MLSS = 23057 ± 6014 mg/L) were introduced to an anoxic reactor for integrated fermentation and denitrification (IFD-SBR). Finally, ammonia (101.4 ± 13.8 mg N/L) released by fermentation in the IFD-SBR and residual 7% nitrite in the PN-SBR were removed through the anaerobic ammonium oxidation (anammox) process in the SAD up-flow anaerobic sludge bed (SAD-UASB). In addition, NO₃^--N generation during the anammox process could be reduced to nitrite by partial denitrification (PD) and reused as substrate for anammox. A satisfactory total nitrogen (TN) removal efficiency (98.3%), external sludge reduction rate (2.5 kg/m³ d) and effluent TN concentration (16.7 mg/L) were achieved after long-term operation (280 days). The IFD-SBR and SAD-UASB contributed to 81.9% and 12.3% nitrogen removal, respectively. Microbial analysis showed that anammox bacteria (1.5% Candidatus Brocadia) cooperated well with partial denitrifying bacteria (4.3% Thauera) in SAD-UASB, and average nitrogen removal contribution were 83.1% during significant stability of anammox and 9.2% during the denitrification process, respectively. The three-stage SAD process provides an environmental and economic approach for landfill leachate treatment since it has the advantage of 25.4% less oxygen, 100% organic matter savings and 47.9% less external sludge than traditional biological processes.

Anammox-based processes: How far have we come and what work remains? A review by bibliometric analysis

Nitrogen contamination remains a severe environmental problem and a major threat to sustainable development worldwide. A systematic analysis of the literature indicates that the partial nitritation-anammox (PN/AMX) process is still actively studied as a viable option for energy-efficient and feasible technology for the sustainable treatment of N- rich wastewaters, since its initial discovery in 1990. Notably, the mainstream PN/AMX process application remains the most challenging bottleneck in AMX technology and fascinates the world's attention in AMX studies. This paper discusses the recent trends and developments of PN/AMX research and analyzes the results of recent years of research on the PN/AMX from lab-to full-scale applications. The findings would deeply improve our understanding of the major challenges under mainstream conditions and next-stage research on the PN/AMX process. A great deal of efforts has been made in the process engineering, PN/AMX bacteria populations, predictive modeling, and the full-scale implementations during the past 22 years. A series of new and excellent experimental findings at lab, pilot and full-scale levels including good nitrogen removal performance even under low temperature (15-10 °C) around the world were achieved. To date, pilot- and full-scale PN/AMX have been successfully used to treat different types of industrial sewage, including black wastewater, sludge digester liquids, landfill leachate, monosodium glutamate wastewater, etc. Supplementing the qualitative analysis, this review also provides a quantitative bibliometrics study and evaluates global perspectives on PN/AMX research published during the past 22 years. Finally, general trends in the development of PN/AMX research are summarized with the aim of conveying potential future trajectories. The current review offers a valuable orientation and global overview for scientists, engineers, readers and decision makers presently focusing on PN/AMX processes.

Effect of organic matters on anammox coupled denitrification system: when nitrite was sufficient

Anaerobic ammonia oxidation (anammox) and denitrification can work together to weaken the influence of organic matter on anaerobic ammonia oxidation bacteria (AAOB) and improve nitrogen removal performance. As the common substrate of anammox and denitrification, nitrite will also affect nitrogen removal performance when it is insufficient, which is not conducive to reflect the endurance of anammox reactor to organic matter. The UASB continuous flow experiment was carried out to investigate the effect of the concentration of glucose and sodium acetate on nitrogen removal performance of anammox reactor under the condition of sufficient nitrite. With glucose as the organic matter, when the chemical oxygen demand (COD) concentration increased to 200 mg l^-1, nitrogen removal performance of the system began to deteriorate significantly, and the anammox activity was significantly inhibited. With sodium acetate as the organic substance, the anammox activity was affected when the COD was 20 mg l^-1. Adequate nitrite could relieve the inhibition of the coupling system by a low concentration (COD < 200 mg l^-1) of glucose organic matter. However, it could not relieve the inhibitory effect of sodium acetate. With the increase of organic concentration, the biological density of AAOB in granular sludge gradually decreased, while the biological density of denitrifying bacteria increased gradually.

Coupling of sulfur(thiosulfate)-driven denitratation and anammox process to treat nitrate and ammonium contained wastewater

This study investigated the feasibility of a new biological nitrogen removal process that integrates sulfur-driven autotrophic denitratation (NO₃^-→NO₂^-) and anaerobic ammonium oxidation (Anammox) for simultaneous removal of nitrate and ammonium from industrial wastewater. The proposed sulfur(thiosulfate)-driven denitratation and Anammox process was developed in two phases: First, the thiosulfate-driven denitratation was established in the UASB inoculated with activated sludge and fed with ammonium, nitrate and thiosulfate for 52 days until the nitrite level in the effluent reached 32.1 mg N/L. Second, enriched Anammox biomass was introduced to the UASB to develop the integrated thiosulfate-driven denitratation and Anammox (TDDA) bioprocess (53-212 d). Results showed that nitrate and ammonium could be efficiently removed from synthetic wastewater by the integrated TDDA system at a total nitrogen (TN) removal efficiency of 82.5 ± 1.8% with an influent NH₄⁺-N of 101.2 ± 2.2 mgN/L, NO₃^--N of 101.1 ± 1.5 mgN/L and thiosulfate of 202.5 ± 3.2 mg S/L. It was estimated that Anammox and autotrophic denitritation (NO₂^-→N₂) contributed to about 90% and 10% of the TN removal respectively at stable operation. The established TDDA system was further supported by high-throughput sequencing analysis that sulfur-oxidizing bacteria (e.g., Thiobacillus and Sulfurimonas) coexisted with Anammox bacteria (e.g., Ca. Kuenenia and Ca. Anammoxoglobus) in this syntrophic biocenosis. Additionally, batch experiments were conducted to reveal the kinetic rates and to reconcile the stoichiometry of the electron donor/acceptor couples of the TDDA process. The results unraveled the mechanisms in the new bioprocess: i) sulfite and elemental sulfur (S⁰) were initially generated from branched thiosulfate; ii) oxidation of sulfite and elemental sulfur coupled with fast and slow denitratation; iii) nitrite produced from denitratation together with ammonium were effectively converted to dinitrogen gas via Anammox.

New direction in biological nitrogen removal from industrial nitrate wastewater via anammox

Anaerobic ammonium oxidation (anammox) is an important scientific discovery in the field of wastewater treatment. This process is a sustainable option in nitrogen removal due to its energy-efficient and cost-effective advantage. Great effort has been made recently to remove ammonium from industrial and municipal wastewater via the anammox process with a preceding partial nitrification (PN) converting part of NH₄⁺ to NO₂^-. Anammox process is seldom involved in the nitrate removal. Nitrate (NO₃^-), one of the main nitrogen compounds produced from various industries, is typically converted to nitrogen gas via denitrification process where a large amount of carbon source is consumed. Within this context, we reviewed the current technologies for high-strength nitrate wastewater treatment. It is found that nitrite accumulation often occurs during nitrate reduction, and its accumulating level would be increased at certain conditions (i.e., low C/N ratio and high pH). Hence, this provides a great opportunity to employ the anammox process to further convert nitrite in a more sustainable way. In this review, we highlight a new approach for industrial nitrate wastewater treatment via partial denitrification coupled with anammox process (PD-A). We also discuss the conditions to achieve successful PD-A process, economic and environmental benefits, and potential challenges as well as the future perspectives in practical application.

Effects of NH4+-N and NO2--N on carbon fixation in an anaerobic ammonium oxidation reactor

Inorganic carbon (IC) is used as a carbon source of the anaerobic ammonium oxidation (anammox) microorganisms during the anammox process. Meanwhile, anammox microorganisms possess a certain carbon fixation capacity. In this study, the effects of NH₄⁺-N and NO₂^--N on carbon fixation in an anammox reactor were investigated. The carbon fixation content had a positive correlation with the amount of NH₄⁺-N and NO₂^--N. A high carbon sequestration of 6.52 mg-C and relatively low CO₂ emissions of 1.00 mg-C were caused by a high amount of influent nitrogen. The microbiology analysis showed that there was a significant relevance between the abundance of the cbbLR1 gene and the carbon fixation content. The results revealed that the Calvin cycle pathway for carbon fixation was used by the anammox bacteria, which may be uncultured Bacillus sp. clone TA_17 or uncultured Methylobacterium sp. clone LA8_13.

The long-term effects of hexavalent chromium on anaerobic ammonium oxidation process: Performance inhibition, hexavalent chromium reduction and unexpected nitrite oxidation

The toxicity of hexavalent chromium (Cr(VI)) is one of the challenges in implementing Anammox process to ammonium-rich wastewater treatment. However, the response of Anammox process to Cr(VI) stress and the inhibition mechanism remain unclear. Here, two Anammox UASB reactors were operated for 285 days under different Cr(VI) stresses. The results showed Anammox performance was not affected at low Cr(VI) concentration (i.e., 0-0.5 mg L^-1), but was severely inhibited at 0.8 mg L^-1. Attempts to domesticate Anammox process to higher Cr(VI) by lowering nitrogen loading rate were failed. Examination of Cr(VI) fate showed the occurrence of extracellular and intracellular Cr(VI) reduction to Cr(III). The inhibition was ascribed to the significant intracellular Cr(VI) reduction, accounting for 99.78% of the total Cr(VI) reduction. Moreover, under long-term Cr(VI) exposure, most nitrite was oxidized to nitrate. But microbial community showed no enrichment of Cr(VI) reducing bacteria and other nitrogen transformation-related bacteria.

Is anammox a promising treatment process for nitrogen removal from nitrogen-rich saline wastewater?

Rapidly growing discharge of nitrogen-rich saline wastewater has significantly affect environment. However, due to the inhibition resulting from high salinity on microbes, it is still a challenge to treat nitrogen-rich saline wastewater efficiently. Anammox process, as a cost-effective and environment-friendly nitrogen removal approach, has shown a potential in treating nitrogen-rich saline wastewater. This review is conducted from a critical perspective and provides a comprehensive overview on the performance of anammox process treating nitrogen-rich saline wastewater. Two strategies including freshwater-derived anammox bacteria acclimatization and marine anammox bacteria enrichment are evaluated. Second, effects resulting from salinity on the performance of anammox reactor, the microbial communities and sludge characteristics are discussed. Third, salinity-tolerant mechanism of anammox bacteria is analyzed. This review also reveals some critical knowledge gaps and future research needs, which benefits application of anammox process to treat nitrogen-rich saline wastewater.

Influence of sulfadimethoxine (SDM) and sulfamethazine (SM) on anammox bioreactors: Performance evaluation and bacterial community characterization

The specific inhibitory effects of sulfonamides on anaerobic ammonium oxidation (anammox) process remain unknown. This study investigated the inhibitory characteristics of sulfadimethoxine (SDM) and sulfamethazine (SM) in two anammox bioreactors with NH₄⁺-N (160 mg/L) and NO₂^--N (210 mg/L) in influent. Results indicate that anammox bacteria in both bioreactors adapted to low antibiotic concentrations (less than 3 mg/L). At concentrations between 5 and 7 mg/L, SDM inhibited the growth of anammox bacteria and resulted in a decrease of Candidatus Brocadia abundance from 2.57% to 0.39%. In contrast, at concentrations of 5-9 mg/L, SM inhibited the denitrification process more severely than SDM, resulting in higher accumulation of nitrite and nitrate. The purpose of this study was to elucidate the inhibitory effects of sulfonamides on the anammox process and to provide a reference for the stable operation of anammox bioreactors for the treatment of sulfonamide-containing wastewater.

Selection of seeding strategy for fast start-up of Anammox process with low concentration of Anammox sludge inoculum

The long start-up time and large demand of Anammox seed sludge limit the practical application of Anammox process. In this study, the seeding strategy of fast start-up of Anammox process using 2.0 g VSS L^-1 of anaerobic granular sludge (AGS) or activated sludge (AS) with various low concentration of Anammox sludge as inoculum was investigated. In laboratory scale, the start-up (achieving 70% TN removal) was shortened from 21 days to 5 days when Anammox sludge concentration increased from 0.02 g VSS L^-1 to 0.2 g VSS L^-1 with 2 g VSS L^-1 AS as inoculum, and 16S rDNA analysis indicated the enrichment of Anammox bacteria, while the start-up failed with AGS. In pilot scale, the start-up was achieved in 10 days using 0.02 g VSS L^-1 of Anammox sludge and 2.0 g VSS L^-1 of AS, confirming the fast start-up of Anammox process with low concentration of Anammox sludge.

A critical review of one-stage anammox processes for treating industrial wastewater: Optimization strategies based on key functional microorganisms

The one-stage nitritation/anammox (anaerobic ammonium oxidation) process is an energy-saving technology, which has been successfully developed and widely applied to treat industrial wastewaters. For the one-stage nitritation/anammox process, key functional microbes generally include anaerobic ammonia oxidation bacteria (AnAOB), ammonia-oxidizing bacteria (AOB), nitrite oxidizing bacteria (NOB), and heterotrophic bacteria (HB). Cooperation and competition among the key functional microbes are critical to the stability and performance of anammox process. Based upon key functional microorganisms, this review summarizes and discusses the optimized strategies that promote the operation of one-stage nitritation/anammox process. In particular, the review focuses on strategies related to: (1) the retention of anammox biomass through granular sludge or biofilm, (2) the balanced relationship between AOB and AnAOB, (3) the NOB suppression and (4) the HB management by controlling the influent organic matter. In addition, the review proposes further research to address the existing challenges.

Anammox granular sludge in low-ammonium sewage treatment: Not bigger size driving better performance

An integrated investigation to document high anammox abundance, activity and diversity in upflow anaerobic sludge blanket (UASB) reactor treating low-strength ammonium loading sewage was performed and showed that the optimal anammox granular sludge sizes could mitigate undesirable N₂O emission. The enhanced anammox bacterial abundance, activity and specific anammox rate were achieved with optimal granules sludge sizes of 0.5-0.9 mm with multiple "Jettenia", "Brocadia", and "Anammoxoglobus" species. The tightly-bound extracellular polymeric substance (TB-EPS) was the main EPS layer found in anammox granular sludge, in which polysaccharides play an important structural role. Over this granular sludge sizes, the anammox bacterial abundance and activity did not significantly decrease, but N₂O emission significantly increased. High throughput sequencing and ecological networks demonstrated the patterns of anammox and their co-occurring bacteria, with availability N₂O-producer and N₂O-reducer functional genes. Incomplete denitrification and insufficient carbon source mainly contributed to N₂O production in granular sludge, as supported by results of stratification analysis.

Inhibitive effects of chlortetracycline on performance of the nitritation-anaerobic ammonium oxidation (anammox) process and strategies for recovery

The short- and long-term effects of chlortetracycline (CTC) on the nitritation- anaerobic ammonium oxidation (anammox) process were evaluated. The half maximal inhibitory concentration of CTC in the batch tests of the nitritation-anammox process was 278.91mg/L at an exposure time of 12hr. The long-term effects of CTC on the process were examined in a continuous-flow nitritation-anammox reactor. Within 14days, the nitrogen removal rate significantly decreased from 0.61 to 0.25kgN/m³/day with 60 mg/L CTC in the influent. The performance suppressed by CTC barely recovered, even after CTC was removed from the influent. Furthermore, the inhibition of CTC also reduced the relative abundance of ammonium oxidizing bacteria (AOB) and anaerobic ammonium oxidizing bacteria (AnAOB) in the reactor, resulting in both a decreased amount of and an imbalance between AOB and AnAOB. When fresh anammox sludge was reseeded into the nitritation-anammox reactor, the nitrogen removal rate recovered to 0.09 ± 0.03 kg N/m³/day.

The '333' integrated strategy for effective pollution control and its application to the heavily polluted Jialu River in north China

In this study, an integrated approach named the '333' strategy was applied to pollution control in the Jialu River, in northern China, which is heavily burdened with anthropogenic pollution. Due to a deficiency of the natural ecological inflow, the Jialu River receives predominantly industrial and municipal effluent. The '333' strategy is composed of three steps of pollution control including industrial point-source pollution control, advanced treatment of municipal wastewater, and ecological restoration; three increased stringency emission standards; and three stages of reclamation. Phase 1 of the '333' strategy focuses on industrial point-source pollution control; phase 2 aims to harness municipal wastewater and minimize sewage effluents using novel techniques for advanced water purification; phase 3 of the '333' strategy focuses on the further purification of effluents flowing into Jialu River with the employment of an engineering-based ecological restoration project. The application of the '333' strategy resulted in the development of novel techniques for water purification including modified magnetic resins (NDMP resin), a two-stage internal circulation anaerobic reactor (IC reactor) and an ecological restoration system. The results indicate that water quality in the river was significantly improved, with increased concentrations of dissolved oxygen (DO), as well as reduction of COD by 42.8% and NH₃-N by 61.4%. In addition, it was observed that the total population of phytoplankton in treated river water notably increased from only one prior to restoration to 8 following restoration. This system also provides a tool for pollution control of other similar industrial and anthropogenic source polluted rivers.

Evaluation of benefits and risks associated with the agricultural use of organic wastes of pharmaceutical origin

Industrial fermentations for the production of pharmaceuticals generate large volumes of wastewater that can be biologically treated to recover plant nutrients through the application of pharmaceutical-derived wastes to the soil. Nevertheless, benefits and risks associated with their recovery are still unexplored. Thus, the aim of the present work was to characterize three potential organic residues (sludge, anaerobic digestate and compost) derived from the wastewater generated by the daptomycin production process. The main parameters evaluated were the physico-chemical properties, potential contaminants (heavy metals, pathogens and daptomycin residues), organic matter stabilization and the potential toxicity towards soil microorganisms and plants. The results showed that all the studied materials were characterized by high concentrations of plant macronutrients (N, P and K), making them suitable for agricultural reuse. Heavy metal contents and pathogens were under the limits established by European and Italian legislations, avoiding the risk of soil contamination. The compost showed the highest organic matter stabilization within the studied materials, whereas the sludge and the anaerobic digestate were characterized by large amounts of labile organic compounds. Although the pharmaceutical-derived fertilizers did not negatively affect the soil microorganisms, as demonstrated by the enzymatic activities, the sludge and the anaerobic digestate caused a moderate and strong phytotoxicity, respectively. The compost showed no toxic effect towards plant development and, moreover, it positively affected the germination and growth in lettuce and barley. The results obtained in the present study demonstrate that the valorization of pharmaceutical-derived materials through composting permits their agricultural reuse and also represents a suitable strategy to move towards a zero-waste production process for daptomycin.

Anaerobic treatment of pharmaceutical wastewater: A critical review

Pharmaceutical wastewaters are usually produced by chemical-synthetic process, and thus contain high levels of organic pollutants, biotoxicity and salinity. Anaerobic technology is a viable option for treating pharmaceutical wastewater owing to its advantages of withstanding high organic-loading, less sludge production and lower operating cost as compared with conventional activated sludge process. In this paper, several types of modern anaerobic or hybrid systems were reviewed on their pollutant reduction performance and operating conditions for treating pharmaceutical wastewater. Meanwhile, the typical predominant microbial populations found in anaerobic process treating pharmaceutical wastewater were summarized. Moreover, the environmental impact of antibiotic residues and health risk of spreading of antibiotic resistant genes (ARGs) were also assessed to offer an in-depth understanding of the growing concern on the discharge of treated pharmaceutical effluent.

Partial nitrification performance and mechanism of zeolite biological aerated filter for ammonium wastewater treatment

A zeolite biological aerated filter (ZBAF) with continuous feeding was successfully applied for achieving stable partial nitrification. Excellent nitrite accumulation (higher than 98.0%) and high nitrite/nitrate production rate (NPR) (approximately 0.760kg/m³/d) were obtained with increase influent ammonium concentration from 250 to 550mg/L within a nitrogen loading rate (NLR) of 0.854-1.200kg/m³/d. Owning to the adsorption of zeolite to ammonium, free ammonia (FA) concentration could remain at an appropriate range for inhibition of nitrite oxidizing bacteria (NOB) and dominance of ammonia-oxidizing bacteria (AOB), which should be responsible for the excellent partial nitrification realized in ZBAF. Kinetic study showed that the production of nitrite in ZBAF followed the zero-order kinetics model and high-throughput sequencing analysis further presented the enrichment of AOB and inhibition of NOB in ZBAF. All the results demonstrated that ZBAF hold a great potential in the application of partial nitrification for ammonium wastewater treatment.

A coupled system of half-nitritation and ANAMMOX for mature landfill leachate nitrogen removal

A coupled system of membrane bioreactor-nitritation (MBR-nitritation) and up-flow anaerobic sludge blanket-anaerobic ammonium oxidation (UASB-ANAMMOX) was employed to treat mature landfill leachate containing high ammonia nitrogen and low C/N. MBR-nitritation was successfully realized for undiluted mature landfill leachate with initial concentrations of 900-1500 mg/L [Formula: see text] and 2000-4000 mg/L chemical oxygen demand. The effluent [Formula: see text] concentration and the [Formula: see text] accumulation efficiency were 889 mg/L and 97% at 125 d, respectively. Half-nitritation was quickly realized by adjustment of hydraulic retention time and dissolved oxygen (DO), and a low DO control strategy could allow long-term stable operation. The UASB-ANAMMOX system showed high effective nitrogen removal at a low concentration of mature landfill leachate. The nitrogen removal efficiency was inhibited at excessive influent substrate concentration and the nitrogen removal efficiency of the system decreased as the concentration of mature landfill leachate increased. The MBR-nitritation and UASB-ANAMMOX processes were coupled for mature landfill leachate treatment and together resulted in high effective nitrogen removal. The effluent average total nitrogen concentration and removal efficiency values were 176 mg/L and 83%, respectively. However, the average nitrogen removal load decreased from 2.16 to 0.77 g/(L d) at higher concentrations of mature landfill leachate.

Microwave-assisted solvothermal synthesis of hierarchical TiO2 microspheres for efficient electro-field-assisted-photocatalytic removal of tributyltin in tannery wastewater

Organotin compounds have been widely used in recent decades, however, the residential tributyltin (TBT) in environment has potential harmful effects on human health due to the disruption of endocrine system even at trace level. Herein, this work reports on an effective electro-field-assisted-photocatalytic technique for removal of TBT by applying an electric field to photocatalysis of as-prepared hierarchical TiO₂ microspheres. The synthesis of catalytic materials is based on a self-assembly process induced by microwave-assisted solvothermal reaction. Hierarchical TiO₂ microspheres consisting of nanowires can be obtained in short time with this facile method and possess high surface area and superior optical properties. As the catalyst, it was found that the reaction rate constant of electro-field-assisted-photocatalytic removal (0.0488 min^-1) of TBT exhibited almost a 9 fold improvement as compared to that of photocatalysis (0.0052 min^-1). The proposed mechanism of electro-field-assisted-photocatalytic removal of TBT was verified by using ¹¹⁷Sn-enriched TBT spike solution as an isotopic tracer. In addition, varying impacts from some key reaction conditions, such as voltage of potential, pH value and the presence of Cr and formaldehyde were also discussed. The overall satisfactory TBT removal performance of the proposed electro-field-assisted-photocatalysis procedure with hierarchical TiO₂ microspheres, which was validated using actual tannery wastewater samples from three different kinds of tanning procedures. These attributes suggest that this electro-field-assisted-photocatalysis may have broad applications for the treatment of tannery wastewater.

Effect of increase in salinity on ANAMMOX-UASB reactor stability

The effect of salinity on the anaerobic ammonium oxidation (ANAMMOX) process in a UASB reactor was investigated by analysing ammonium, nitrite, nitrate and TN concentrations, and TN removal efficiency. Extracellular polymeric substances (EPSs) and specific ANAMMOX activity (SAA) were evaluated. Results showed the effluent deteriorated after salinity was increased from 8 to 13 g/L and from 13 to 18 g/L, and TN removal efficiency decreased from 80% to 30% and 80% to 50%, respectively. However, ANAMMOX performance recovered and TN removal efficiency increased to 80% after 40 days when the influent concentrations of [Formula: see text] and [Formula: see text] were 200 mg/L and salinity levels were at 13 and 18 g/L, respectively. The amount of EPSs decreased from 58.9 to 37.1 mg/g volatile suspended solids (VSS) when the reactor was shocked by salinity of 13 g/L, and then increased to 57.2 mg/g VSS when the reactor recovered and ran stably at 13 g/L. The amount of EPSs decreased from 57.2 to 49.1 mg/g VSS when the reactor was shocked by salinity of 18 g/L, and then increased to 60.7 mg/g VSS when the reactor recovered and ran stably at 18 g/L. The amount of EPS and the amounts of polysaccharide, protein and humus showed no evident difference when the reactor recovered from different levels of salinity shocks. Batch tests showed salinity shock load from 8 to 38 g/L inhibited the SAA. However, when the reactor recovered from salinity shocks, SAA was higher compared to that when the reactor was subjected to the same level of salinity shock.