Investigation of adsorptive fractionation of humic acid on graphene oxide using fluorescence EEM-PARAFAC

N-coordinated iron sites dispersed in porous carbon frameworks to activate peroxymonosulfate for efficient sulfisoxazole degradation and real hospital wastewater decontamination

Herein, an N-coordinated Fe site dispersed in porous carbon frameworks (Fe-NC) fabricated from zeolitic imidazolate frameworks encapsulated with iron acetylacetonate (Fe(acac)3 @ZIFs) was employed to activate peroxymonosulfate (PMS) for the attenuation of sulfisoxazole (SIZ) and treating real hospital wastewater. The constructed Fe-NC/PMS system exhibited good catalytic stability for SIZ degradation, maintaining excellent degradation performance over multiple cycles with virtually no leaching. The quenching experiments, electron paramagnetic resonance (EPR) capture analyses, and semi-quantitative measurements showed that singlet oxygen (1O2) and high-valent metal-oxo species were mainly responsible for SIZ degradation by Fe-NC/PMS. Significantly, ultra-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS/MS) was used to trace 134 pharmaceutical contaminants in real hospital wastewater. Effective degradation was achieved for 87 % of the pharmaceutical contaminants by the Fe-NC/PMS process. Seventy-four pharmaceutical contaminants were eliminated. Taken together, this work successfully established the Fe-NC/PMS technology using the developed iron-based materials and explored its application to real hospital wastewater treatment, providing an eco-friendly and effective strategy for treating wastewater.

Composition regulates dissolved organic matter adsorption onto iron (oxy)hydroxides and its competition with phosphate: Implications for organic carbon and phosphorus immobilization in lakes

Dissolved organic matter (DOM) is a heterogeneous pool of compounds and exhibits diverse adsorption characteristics with or without phosphorous (P) competition. The impacts of these factors on the burial and mobilization of organic carbon and P in aquatic ecosystems remain uncertain. In this study, an algae-derived DOM (ADOM) and a commercially available humic acid (HA) with distinct compositions were assessed for their adsorption behaviors onto iron (oxy)hydroxides (FeOx), both in the absence and presence of phosphate. ADOM contained less aromatics but more protein-like and highly unsaturated structures with oxygen compounds (HUSO) than HA. The adsorption capacity of FeOx was significantly greater for ADOM than for HA. Protein-like and HUSO compounds in ADOM and humic-like compounds and macromolecular aromatics in HA were preferentially adsorbed by FeOx. Moreover, ADOM demonstrated a stronger inhibitory effect on phosphate adsorption than HA. This observation suggests that the substantial release of autochthonous ADOM by algae could elevate internal P loading and pose challenges for the restoration of restore eutrophic lakes. The presence of phosphate suppressed the adsorption of protein-like compounds in ADOM onto FeOx, resulting in an increase in the relative abundance of protein-like compounds and a decrease in the relative abundance of humic-like compounds in post-adsorption ADOM. In contrast, phosphate exhibited no discernible impact on the compositional fractionation of HA. Collectively, our results show the source-composition characters of DOM influence the immobilization of both DOM and P in aquatic ecosystems through adsorption processes. The preferential adsorption of proteinaceous compounds within ADOM and aromatics within HA highlights the potential for the attachment with FeOx to diminish the original source-specific signatures of DOM, thereby contributing to the shared DOM characteristics observed across diverse aquatic environments.

A novel chitosan and polyferric sulfate composite coagulant for biogas slurry pretreatment by simultaneous flocculation and floatation: Performance and underlying mechanisms

Biogas slurry from anaerobic digestion is rich in nutrients but has not been fully utilized due to a high content of suspended solids (SS) causing clogging during agricultural irrigation. This study aimed to evaluate the performance of a novel chitosan and polyferric sulfate (CTS-PFS) composite coagulant for simultaneous flocculation and floatation to enhance SS removal while preserving nutrients in biogas slurry. Orthogonal method was used for experimental design to determine the optimal synthesis and operational conditions of CTS-PFS. Results show that CTS-PFS outperformed individual CTS and PFS coagulant in terms of SS removal and nutrient (nitrogen, phosphorus, and potassium) preservation. Compared to individual CTS and PFS coagulation, the combination of CTS and PFS at the mass ratio of 1:6 showed significantly higher performance by 41.5 % increase in SS removal and 5.2 % reduction in nutrient loss. The improved performance of CTS-PFS was attributed to its formation of polynuclear hydroxyl complexes with ferric oxide groups (e.g. Fe-OH, Fe-O-Fe, Fe-OH-Fe and COO-Fe) to strengthen charge neutralization and adsorption bridging. Data from this study further confirm that CTS-PFS enhanced the removal of small suspended particles and dissolved organic matter in the molecular weight range of 0.4-2.0 kDa and preserved ammonia and potassium better in biogas slurry. Bubbles were generated as hydrogen ions from coagulant hydrolysis interacted with bicarbonate and carbonate in biogas slurry for removing the produced flocs by floatation. Floc flotation was more effective in CTS-PFS coagulation due to the significant production of uniform bubbles, evidenced by the reduction in the viscosity of biogas slurry.

Enhanced landfill leachate treatment performance by adsorption-assisted membrane distillation

Membrane fouling and high-strength membrane concentrate production are two limitations of membrane distillation (MD) for landfill leachate treatment. In this study, activated carbon- and biochar-based adsorption processes were integrated into a conventional MD system to overcome these limitations. The organic matter fractionations of the leachate were thoroughly investigated during the treatment. Membrane-reversible and irreversible foulants differed remarkably from the inlet leachate in the non-assisted MD system. Specifically, reversible foulants were characterized by a high abundance of humic-like fluorescent components, high-molecular-weight humic-size constituents, peptides, and unsaturated compounds. In contrast, irreversible foulants were enriched with fulvic-like fluorescent components, low-molecular-weight neutrals, unsaturated compounds, and polyphenols. The adsorption-based pre-treatment effectively removed foulant precursors from landfill leachate, with a relatively higher (20%) adsorption performance for specific biochar used in this study than for activated carbon. Compared with the non-assisted MD system, the biochar-assisted MD system showed improved performance, achieving 40% overall membrane flux recovery, 42% higher filtration fluxes, and 53% lower concentrate production. In addition, a 15% higher removal of irreversible foulants was observed as compared to the reversible foulants, which can potentially increase the membrane lifespan. This study demonstrates the effectiveness of an adsorption-assisted MD system supported by increased filtration, membrane fouling alleviation, and low-strength leachate concentrate generation.

In-situ sewer sediment self-cleaning by plant ash-driven hydrolysis: Impairing adhesion and hydraulic erosion resistance from gelatinous biopolymer molecule deconstruction

The gelatinous structure and adhesion of sediments induced strong hydraulic erosion resistance and bottom siltation, which brought about serious challenges in sewer management. The in-situ sediment self-cleaning technology with low energy and labor consumption has become urgent demand. This study proposed an innovative plant ash-triggered molecule hydrolysis strategy for driving sewer sediment self-cleaning. Plant ash treatment at the optimal dosage of 0.10 g/g SS promoted molecular deconstruction and dissolution of aromatic proteins (tryptophan-like and tyrosine-like proteins), humic acids (fulvic acid-like and humic acid-like substances) and carbohydrates with secondary structure deflocculation (α-helix to β-turn), meanwhile numerous microbial cells were lysed, contributing to linkage breakage in extracellular polymeric substance (EPS). The gelatinous EPS disruption and outward migration with cohesion reduction were achievable. Sediment adhesion was vulnerable to EPS structural damage, which was degenerated by 91.14 %. Correspondingly, the sediment matrix structure was observably disintegrated into dispersive and small fragments, with increased surface electronegativity and eliminated adhesive bio-agglomeration. Thereby, the sensitivity of sediments to hydraulic erosion was greatly improved. In this case, substantial organic and inorganic sediment particles were solubilized and downstream transported by gravity sewage flow. Such plant ash-triggered hydrolysis provided a sustainable strategy for sediment self-cleaning in "waste control by waste" pattern, which improved sediment floating by 7.25-9.57 times. Considerable economic benefits of 35.56-123.46 CNY/(sewer meter length) were obtained compared with traditional mechanical flushing approaches. The findings might provide theoretical and engineering inspirations for solving sewer sediment issues.

Process analysis of microplastic aging during the photochemical oxidation process and its effect on the adsorption behavior of dissolved organic matter

Information on microplastics (MPs) interactions with dissolved organic matter (DOM) is essential for understanding their environmental impacts. However, research is scarce regarding the adsorption behavior of DOM with different characteristics onto pristine and aged MPs. This research thus investigates MPs aging behavior accelerated by UV/Persulfate and UV/chlorine oxidation processes and the adsorption behavior of organic matter with low-specific ultraviolet absorbance (L-SUVA) and high-SUVA (H-SUVA) characteristics. MPs were degraded by UV/Cl and UV/Persulfate for 30 days. Changes in thermal properties, surface morphology, and chemistry were studied using different analytical techniques. The adsorption behavior was assessed by adsorption kinetic and isotherm study. After oxidation, the surface of the MPs showed a significant increase in the oxygen-containing functional groups, contact angle, surface roughness, and surface energy, and a decrease in crystallinity. The oxidation effect follows the order of UV/Cl > UV/Persulfate. The kinetic and equilibrium data of H-SUVA adsorption on pristine and aged MPs well-fitted the pseudo-second-order and Langmuir model. In contrast, L-SUVA well-fitted the pseudo-first-order and Freundlich model. The adsorption capacity (qm) increased in the following orders: 8.11 > 5.87>4.29 mg g-1 for H-SUVA and 19.81 > 6.662>5.315 mg g-1 for L-SUVA by MPs aged with UV/Cl, UV/Persulfate and pristine MPs, respectively. The larger the surface damage of MPs, the greater the adsorption affinity of DOM. The result was attributed to the physical adsorption process, hydrophobic interactions, electrostatic, hydrogen, and halogen bonding. These findings are beneficial to provide new insights involving the adsorption behavior and interaction mechanisms of DOM onto MPs for the environmental risk assessment.

Photocatalytic membrane coated with α-Fe2O3/Fe3O4 for enhanced filtration performance and antifouling property in surface water treatment

A photocatalytic membrane coated with α-Fe2O3/Fe3O4 nanoparticles has been developed to address the challenges of membrane fouling and organic removal in the treatment of natural surface water. The photocatalytic and filtration properties of the membranes were investigated through a variety of methods. The successful preparation of iron oxide was confirmed by UV-vis diffuse reflectance spectra and X-ray diffractometry, with α-Fe2O3 identified as the primary photocatalytic agent. A commercial ultrafiltration (UF) membrane was employed as a comparison to evaluate the photocatalytic performance and filtration properties of the modified membrane. Results showed that the photocatalytic membrane achieved better removal rates for UV254 (22.0%) and specific fluorescent organic compounds, such as component 2 (19.38%) and component 3 (16.89%), compared to the control group. Furthermore, both irreversible and reversible fouling resistances of the prepared membranes were significantly lower than that of the control group, with reductions of 39.4% and 50.2%, respectively. The membrane coated with α-Fe2O3/Fe3O4 nanoparticles exhibited moderate removal of protein-like and terrestrially derived humic-like fluorescent organics while controlling membrane fouling. Although the α-Fe2O3/Fe3O4 nanoparticles-coated photocatalytic membrane demonstrated good anti-fouling properties, the removals of organic matters were not as effective as anticipated due to the shorter hydraulic retention time. This study provides valuable insights for enhancing pollutant degradation and anti-fouling properties of membranes through the utilization of solar photocatalytic α-Fe2O3/Fe3O4 surface-modified membranes in the treatment of natural surface water.

Molecular insight into DOM fate using EEM-PARAFAC and FT-ICR MS and concomitant heavy metal behaviors in biologically treated landfill leachate during coagulation: Al speciation dependence

Various combined processes with pre-coagulation have been developed for biologically treated landfill leachate, but the microscopic-level processes occurring during coagulation remain largely unknown. Herein, dissolved organic matter (DOM) fate using fluorescence excitation emission matrix spectroscopy combined with parallel factor analysis and electrospray ionization coupled Fourier transform-ion cyclotron resonance mass spectrometry and concomitant heavy metal (HM) behaviors were explored at the molecular level. In addition, AlCl3 and two polyaluminum chloride (PACl) species (dominated by [AlO4Al12(OH)24(H2O)12]7+ and [(AlO4)2Al28(OH)56(H2O)26]18+, respectively) were used. The results show that all coagulants are efficient at removing DOM. PACl was found to be advantageous over AlCl3 in overcoming pH fluctuation, which is ascribed to the different dominant mechanisms, namely, entrapment and sweep flocculation for AlCl3 and charge neutralization for PACl. Consequently, PACl was more effective at removing humic substances, usually high-molecular-weight, oxygen-rich and unsaturated, than protein substances. For HM removal, PACl was likewise better and more stable, where As, Cu, Ni, Co and Hg were removed predominantly via adsorption, and Cr, Zn, Pb, Cd and Mn were removed via coprecipitation. Correlation analysis showed that humic substances tended to complex with HMs and be removed synergistically due to the ubiquitous occurrences of aromatic structures and oxygen-containing functional groups.

Carbon-based nanomaterials mediated adsorption and photodegradation of typical organic contaminants in aqueous fulvic acid solution

In this work, the formation of carbon-based nanomaterials-fulvic acid (CNMs-FA) composites and their capacities for the adsorption and photodegradation of typical organic contaminants in aqueous solutions were investigated. The results suggested that the formation of CNMs-FA composites was dominated by adsorbing FA on CNMs via the physisorption process, which fit the pseudo-first-order kinetic model and the Langmuir isotherm model. The formed CNMs-FA composites were characterized by using the Brunauer-Emmett-Teller, scanning electron microscopy, and infrared spectroscopy techniques and further applied for examining their effects on the adsorption and photodegradation of selected organic contaminants in aqueous solutions. The adsorption of organic contaminants on CNMs-FA composites is mainly involved in hydrogen bonding and electrostatic interactions between organic contaminants and FA species adhering to CNMs. In addition, the CNMs-FA composites are able to promote the photosensitive degradation of organic contaminants due to the photogenerated reactive species including ROS and CNMs-3FA* under sunlight irradiation. This study provided a deeper and more comprehensive understanding of the environmental behavior of CNMs in real natural surface water and clarified the underlying mechanisms.

Characteristics of dissolved organic matter composition in biochar: Effects of feedstocks and pyrolysis temperatures

Biochar has widely used in soil pollution remediation due to its advantages of high efficiency and environmental sustainability. Dissolved organic matter (DOM) released by biochar plays a non-negligible role in the migration and transformation of pollutants in environment, and its composition was regarded as main impact factor. In this study, 28 biochar were investigated to detect the effect of pyrolysis temperature and feedstock on DOM content and components. Results showed that the content of DOM released from biochar at low pyrolysis temperatures (300-400 ℃) was higher than that from high pyrolysis temperatures (500-600 ℃). In addition, the specific UV-Visible absorbance at 254 nm (SUVA254) results expressed that DOM from peanut shell biochar (PSBC), rice husk biochar (RHBC) and bamboo biochar (BBC) had higher humification at high temperatures. Moreover, one fulvic acid-like (C2) and two humic acid-like (C1, C3) substances were main fluorescent components of biochar-derived DOM identified by parallel factor analysis based on excitation emission matrices fluorescence spectroscopies (EEM-PARAFAC). With the increase of pyrolysis temperature, humic acid substances content gradually decreased. The correlation analysis results revealed that pyrolysis temperatures and O/C, H/C, DOM content, the biological index (BIX), humification index (HIX), C1% and C3% was negatively correlated (p < 0.001). Thus, the pyrolysis temperatures take important roles in composition of DOM released from biochar, and this research would provide a reference for the application of biochar in the environment.

Coupled effects of sedimentary iron oxides and organic matter on geogenic phosphorus mobilization in alluvial-lacustrine aquifers

The organic matter (OM) biodegradation and reductive dissolution of iron oxides have been acknowledged as key factors in the release of geogenic phosphorus (P) to groundwater. However, the coupled effects of natural OM with iron oxides on the mobilization of geogenic P remain unclear. Groundwater with high and low P concentrations has been observed in two boreholes in the alluvial-lacustrine aquifer system of the Central Yangtze River Basin. Sediment samples from these boreholes were examined for their P and Fe species as well as their OM properties. The results show that sediments from borehole S1 with high P levels contain more bioavailable P, particularly iron oxide bound P (Fe-P) and organic P (OP) than those from borehole S2 with low P levels. Regarding borehole S2, Fe-P and OP show positive correlations with total organic carbon as well as amorphous iron oxides (Fe_OX1), which indicate the presence of Fe-OM-P ternary complexes, further evidenced by FTIR results. In a reducing environment, the protein-like component (C3) and terrestrial humic-like component (C2) will biodegrade. In the process of C3 biodegradation, Fe_OX1 will act as electron acceptors and then undergo reductive dissolution. In the process of C2 biodegradation, Fe_OX1 and crystalline iron oxides (Fe_OX2) will act as electron acceptors. Fe_OX2 will also act as conduits in the microbial utilization pathway. However, the formation of stable P-Fe-OM ternary complexes will inhibit the reductive dissolution of iron oxides and OM biodegradation, thus inhibiting the mobilization of P. This study provides new insights into the enrichment and mobilization of P in alluvial-lacustrine aquifer systems.

Application of the biogas residue of anaerobic co-digestion of gentamicin mycelial residues and wheat straw as soil amendment: Focus on nutrients supply, soil enzyme activities and antibiotic resistance genes

Land utilization of the biogas residue (BR) produced by anaerobic co-digestion of gentamicin mycelial residues (GMRs) and wheat straw is a promising method to achieve the deep recycling of GMRs. This study evaluated the feasibility and efficacy of application of using BR as a soil amendment by using a pot experiment. Results indicated that BR could improve the soil fertility better than commercial chicken manure fertilizer (CMF) in terms of the soil enzyme activities and nutrients supply. Random Forest (RF) model was applied to predict soil enzyme activities and identify key influencing factors. Combining the Random Forest (RF) model with the Three-dimensional Excitation-emission Matrix and Parallel Factor (3D-EEM-PARAFAC) analysis, revealing that humic-like substances provided by BR protected soil enzymes, thus improving soil fertility. Furthermore, gentamicin and antibiotic resistance genes (ARGs)/mobile genetic elements (MEGs) introduced by BR decreased greatly after cultivation, implying a low risk of antimicrobial resistance. This study suggested that reasonable application of BR could improve soil nutrients supply, soil enzyme activity and control antimicrobial resistance risk.

The evolution of a typical plateau lake from macrophyte to algae leads to the imbalance of nutrient retention

Long-term anthropogenic nitrogen (N) and phosphorus (P) inputs have led to lake eutrophication and decreased environmental quality. However, the imbalance in nutrient cycling caused by ecosystem transformation during lake eutrophication is still unclear. The N, P, organic matter (OM) and their extractable forms in the sediment core of Dianchi Lake were investigated. Combining ecological data and geochronological techniques, a coupling relationship between the evolution of lake ecosystems and nutrient retention was established. The results show that the evolution of lake ecosystems promotes the accumulation and mobilization of N and P in sediments, leading to an imbalance in nutrient cycling in the lake system. From the "macrophyte-dominated" period to the "algae-dominated" period, the accumulation rates of potential mobile N and P (PMN, PMP) in sediments have significantly increased, and the retention efficiency of total N and P (TN, TP) has decreased. The increased TN/TP ratio (5.38 ± 1.52 ‒ 10.19 ± 2.94) and PMN/PMP ratio (4.34 ± 0.41 ‒ 8.85 ± 4.16), as well as the reduced humic-like/protein-like ratio (H/P, 11.18 ± 4.43 ‒ 5.97 ± 3.67), indicated an imbalance in nutrient retention during sedimentary diagenesis. Our results show that eutrophication has resulted in the potential mobilization of N in sediments exceeding P, providing new insights for further understanding the nutrient cycle in the lake system and strengthening lake management.

Organic matter degradation and arsenic enrichment in different floodplain aquifer systems along the middle reaches of Yangtze River: A thermodynamic analysis

Geogenic arsenic (As) contaminated groundwater has been widely accepted associating with dissolved organic matter (DOM) in aquifers, but the underlying enrichment mechanism at molecular-level from a thermodynamic perspective is poorly evidenced. To fill this gap, we contrasted the optical properties and molecular compositions of DOM coupled with hydrochemical and isotopic data in two floodplain aquifer systems with significant As variations along the middle reaches of Yangtze River. Optical properties of DOM indicate that groundwater As concentration is mainly associated with terrestrial humic-like components rather than protein-like components. Molecular signatures show that high As groundwater has lower H/C ratios, but greater DBE, AI_mod, and NOSC values. With the increase of groundwater As concentration, the relative abundance of CHON3 formulas gradually decreased while that of CHON2 and CHON1 increased, indicating the importance of N-containing organics in As mobility, which is also evidenced by nitrogen isotope and groundwater chemistry. Thermodynamic calculation demonstrated that organic matter with higher NOSC values preferentially favored the reductive dissolution of As-bearing Fe(III) (hydro)oxides minerals and thus promoted As mobility. These findings could provide new insights to decipher organic matter bioavailability in As mobilization from a thermodynamical perspective and are applicable to similar geogenic As-affected floodplain aquifer systems.

The Adsorption Behaviors and Mechanisms of Humic Substances by Thermally Oxidized Graphitic Carbon Nitride

Thermal oxidation is efficient for enhancing the photocatalysis performance of graphitic carbon nitride (g-C₃N₄), while its effect on adsorption performance has not been fully studied, which is crucial to the application of g-C₃N₄ as adsorbents and photocatalysts. In this study, thermal oxidation was used to prepare sheet-like g-C₃N₄ (TCN), and its application for adsorption of humic acids (HA) and fulvic acids (FA) was evaluated. The results showed that thermal oxidation clearly affected the properties of TCN. After thermal oxidation, the adsorption performance of TCN was enhanced significantly, and the adsorption amount of HA increased from 63.23 (the bulk g-C₃N₄) to 145.35 mg/g [TCN prepared at 600 °C (TCN-600)]. Based on fitting results using the Sips model, the maximum adsorption amounts of TCN-600 for HA and FA were 327.88 and 213.58 mg/g, respectively. The adsorption for HA and FA was markedly affected by pH, alkaline, and alkaline earth metals due to electrostatic interactions. The major adsorption mechanisms included electrostatic interactions, π-π interactions, hydrogen bonding, along with a special pH-dependent conformation (for HA). These findings implied that TCN prepared from environmental-friendly thermal oxidation showed promising prospects for humic substances (HSs) adsorption in natural water and wastewater.

In Situ Visualization of Membrane Fouling Evolution during Ultrafiltration Using Label-Free Hyperspectral Light Sheet Fluorescence Imaging

Profound understanding of fouling behaviors and underlying mechanisms is fundamentally important for fouling control in membrane-based environmental applications. Therefore, it entails novel noninvasive analytical approaches for in situ characterizing the formation and development of membrane fouling processes. This work presents a characterization approach based on hyperspectral light sheet fluorescence microscopy (HSPEC-LSFM), which is capable of discriminating various foulants and providing their 2-dimensional/3-dimensional spatial distributions on/in membranes in a label-free manner. A fast, highly sensitive and noninvasive imaging platform was established by developing a HSPEC-LSFM system and further extending it to incorporate a laboratory-scale pressure-driven membrane filtration system. Hyperspectral data sets with a spectral resolution of ∼1.1 nm and spatial resolution of ∼3 μm as well as the temporal resolution of ∼8 s/plane were obtained, and the fouling formation and development process of foulants onto membrane surfaces, within the pores and on the pore walls were clearly observed during the ultrafiltration of protein and humic substances solutions. Pore blocking/constriction at short times while cake growth/concentration polarization at longer times was found to have coupled effects for the flux decline in these filtration tests, and yet the contribution of each effect as well as the transition of the governing mechanisms was found distinct. These results demonstrate in situ label-free characterization of membrane fouling evolution with the recognition of foulant species during filtration and provide new insights into membrane fouling. This work offers a powerful tool to investigate dynamic processes for a wide range of membrane-based explorations.

Effects of Biochar on the Fluorescence Spectra of Water-Soluble Organic Matter in Black Soil Profile after Application for Six Years

At present, extracting water-soluble organic matter (WSOM) from agricultural organic waste is primarily used to evaluate soil organic matter content in farmland. However, only a few studies have focused on its vertical behavior in the soil profile. This study aims to clarify the three-dimensional fluorescence spectrum characteristics of the WSOM samples in 0-60 cm black soil profile before and after different chemical fertilizer treatments after six years of fertilization. Fluorescence spectroscopy combined with fluorescence and ultraviolet-visible (UV-Vis) spectroscopies are used to divide four different fertilization types: no fertilization (T0), nitrogen phosphorus potassium (NPK) (T1), biochar (T2), biochar + NPK (T3), and biochar + N (T4) in a typical black soil area. The vertical characteristics of WSOC are also analyzed. The results showed that after six years of nitrogen application, T2 had a significant effect on the fluorescence intensity of Zone II (decreasing by 9.6% in the 0-20 cm soil layer) and Zone V (increasing by 8.5% in the 0-20 cm soil layer). The fluorescent components identified in each treatment group include ultraviolet radiation A humic acid-like substances (C1), ultraviolet radiation C humic acid-like substances (C2), and tryptophan-like substance (C3). As compared with the land with T1, the content of C2 in the 20-60 cm soil layer with T2 was lower, while that of C2 in the surface and subsoil with T3 was higher. In addiiton, there were no significant differences in the contents of C1, C2, and C3 by comparing the soils applied with T3 and T4, respectively. The composition of soil WSOM was found to be significantly influenced by the addition of a mixture of biochar and chemical fertilizers. The addition of biochar alone exerted a positive effect on the humification process in the surface soil (0-10 cm). NPK treatment could stimulate biological activity by increasing biological index values in deeper soil layers (40-50 cm). Nitrogen is the sovereign factor that improves the synergism effect of chemical fertilizer and biochar during the humification process. According to the UV-Vis spectrum and optical index, soil WSOM originates from land and microorganisms. This study reveals the dynamics of WSOC in the 0-60 cm soil layer and the biogeochemical effect of BC fertilizer treatment on the agricultural soil ecosystem.

Mitigation of ultrafiltration membrane fouling by a simulated sunlight-peroxymonosulfate system with the assistance of irradiated NOM

Oxidation pretreatments prior to ultrafiltration are hindered by the need for energy input and sludge disposal. Herein, a simulated sunlight-induced natural organic matter (NOM) for peroxymonosulfate (PMS) activation was used as pretreatment to alleviate ultrafiltration membrane fouling caused by NOM itself in the Songhua River water. When light intensity was over 100 mW/cm², the pretreatment removed NOM effectively, characterized with UV₂₅₄, dissolved organic carbon (DOC) and maximum fluorescent intensity (F_max), and improved filtration flux. At 200 mW/cm² light intensity and 0.5 mM PMS, 57.5% of UV₂₅₄ and 18.5% of DOC were removed, and humic-like fluorescent component was degraded by 84%-94% while ∼60% for protein-like substance. Membrane flux was increased by 94%, and reversible and irreversible fouling resistances were reduced by 62.4% and 51.9%, respectively. Both total fouling index (TFI) and hydraulic irreversible fouling index (HIFI) were moderately correlated with the DOC, whereas they prominently correlated with the UV₂₅₄ and the F_maxs of all fluorescence components, which could be served as key indicators to predict and control membrane fouling. Mathematical modeling showed that the pretreatment alleviated the fouling in the membrane pores and cake layer. The simulated sunlight-induced NOM (³NOM* and e_aq^¯) could activate PMS to form active species, which enabled to oxidize high molecular weight (MW) substances and mineralize low MW compounds in NOM as well as hinder their linking with inorganic cations, thereby reducing organic and inorganic membrane fouling simultaneously. This study may provide a new strategy for decentralized potable water treatment, especially in a single household or community.

Dissociation and removal of alkali and alkaline earth metals from sewage sludge flocs during separate and assisted thermal hydrolysis

High levels of alkali and alkaline earth metals (AAEM, including K, Na, Ca, and Mg) in sludge needs to be removed in pretreatment process for alleviating adverse effects on subsequent disposal. Theoretically, the liquid environment provided by the pretreatment technology of thermal hydrolysis (TH) is the ideal condition for the dissolution of AAEM. Therefore, this work quantified AAEM removal efficiency of TH and carbonaceous skeleton (CSkel) assisted TH that we previously proposed for sludge dewatering. Then the mechanism of AAEM dissociating from sludge was explored through the new perspective of biological structure evolution and chemical species transformation. The results showed that all of the AAEM in raw sludge was trapped in extracellular polymer substances (EPS) and cells. Only the water-soluble K/Na in EPS could be released by TH to the supernatant, the residual K/Na in EPS was organically linked with humic matters that were generated through the degradation of proteins. Water/NH₄Ac-soluble K/Na in cells still stayed inside with a more stable form of HCl-soluble after TH. Fortunately, with the assistance of CSkel, this part of K/Na could be leached out due to organic acids derived from hemicellulose decomposition. In such a case, the removal efficiency of K/Na was elevated to 55.5% and 72.5%, respectively. Unlike K/Na, nearly all the Ca/Mg in EPS were transferred to cell residuals during TH. They were combined with the bio-phosphorus in cell residuals as the form of HCl-soluble Ca/Mg-P precipitates, rather than carbonates, sulfates or other compounds. This precipitation reaction was also moderately suppressed in CSkel-assisted TH with low pH, then 7.7% and 34.1% of Ca/Mg were taken away by filtrate. This means that appropriately raising the reaction temperature and adding CSkel with high hemicellulose/cellulose contents can promote the removal of AAEM in sludge during TH process.

Photochemical and microbial transformation of particulate organic matter depending on its source and size

Particulate organic matter (POM) in water systems can be converted into dissolved organic matter (DOM) through various pathways depending on its properties and transformation. Thus, information on the behavior of POM is crucial for fully understanding water systems and the carbon cycle. In this study, the effects of particle size and the source of POM, as well as photochemical and microbial changes in DOM characteristics subsequently released from POM were evaluated using various spectral indices, excitation-emission matrix combined with parallel factor analysis components, and principal component analysis. The amount of dissolved organic carbon (DOC) released from POM during suspension was significantly associated with the carbon content of POM (p < 0.05). The amount of DOC (mg-C/g-SS) decreased in mineral-bound POM as a result of microbial degradation but increased in biogenic POM as a result of microbial dissolution, owing to the structural differences in organic matter from different sources. Mineral-bound POM showed more DOC production by photochemical desorption than microbial degradation, whereas biogenic POM displayed the opposite trend. The DOM derived from fine POM had more humified terrestrial humic-like substances than those derived from coarse POM. Principal components 1 and 2 were associated with DOC production and degree of humification, respectively. The increase in the degree of aromaticity and humification of organic matter was higher in mineral-bound POM by photochemical desorption of highly humified organic matter and in the biogenic POM by microbial dissolution. In conclusion, this study was able to provide basic information on the transformation of POM, thus, it is expected to broaden the knowledge of the biogeochemical cycle of organic matter.

Active binding sites for ofloxacin resulted from adsorptive fractionation of humic acid on kaolinite

The adsorptive fractionation of humic acid (HA) at the interface between minerals and water can significantly affect the fate of pollutants in water-soil environment. However, the adsorptive fractionation behavior of HA on kaolinite and its effect on the migration of fluoroquinolones (FQs) have not been fully understood. In this study, fluorescence and infrared spectroscopy, combined with two-dimensional correlation analyses, were used to explore the adsorptive fractionation of humic acid (HA) and its effects on ofloxacin adsorption on kaolinite. The results indicated that humic-like, rather than reduced quinone-like and tyrosine-like, was the main adsorptive fractionation component and preferentially bound to the Al-O sites of kaolinite. The adsorption mechanisms of humic-like and tyrosine-like mainly include hydrogen bonds between acidic functional groups and the Si-O or Al-O groups of kaolinite, n-π electron donor-acceptor interaction and electrostatic attraction. At pH 7.0, with addition of 4.0 and 16.0 mg C/L HA in solution, the adsorptive fractionation of HA on kaolinite led to increases in ofloxacin (in zwitterionic form) adsorption capacity by 1.46 and 3.35 mg/g, respectively. The interactions between ofloxacin and the humic-like were mainly hydrogen bonds and electrostatic attraction. Therefore, the influence of adsorptive fractionation of dissolved organic matter on minerals should be considered in estimating FQs environmental behaviors.

Distinct response of arsenic speciation and bioavailability to different exogenous organic matter in paddy soil

Land application of organic waste has been increasingly encouraged since it could sequester carbon to mitigate climate change. Considering the susceptibility of arsenic (As) bioavailability in soils to organic matter, understanding the influence of different exogenous organic matter on As biogeochemical behavior in rice-soil system is crucial to reasonably recycle organic waste on soils and ensure the food safety. In this study, impacts of two typical organic matter amendments, rice straw and humic substance, on the As speciation and bioavailability in paddy soil were investigated. Results showed that addition of both rice straw and humic substance could increase the dissolved organic carbon (DOC) content in soil solution by 16.4%-34.4% and 21.7%-53.2%, respectively, but the response of As speciation and bioavailability was quite different, showing the decoupling between As release and DOC. Rice straw addition increased As release to porewater by 28.0%-28.4%, particularly at the initial 0-18 days after the soil was flooded, but humic substance presented the opposite effect, decreasing As release by 27.4%-43.1% which was mainly attributable to the As^III immobilization. This study suggests that the organic matter with high contents of labile heteroaliphatic/aliphatic carbon, being easily to be biodegraded, should not be applied on As contaminated soils.

Change in adsorption behavior of aquatic humic substances on microplastic through biotic and abiotic aging processes

Interactions between microplastics (MPs) and humic substances (HS) are inevitable in MP-contaminated aquatic environment because of the ubiquitous presence of HS. In this study, we explored the effects of abiotic and biotic aging processes on the adsorption behavior of aquatic HS on MPs. Aging experiments were conducted using polyethylene (PE) as a representative MP, in which UV irradiation and microbial incubation were applied for 15 to 18 days to mimic the natural abiotic and biotic aging processes. Surface modifications after the aging treatments were evidenced by the appearance of CO, CO, O-C=O, and -OH groups; the formation of grooves on UV-aged PE; and the formation of biofilms on the surface of bio-aged PE. The specific surface areas of both treated PE MPs increased with aging. Higher HS adsorption on PE surface was observed after the aging treatments, with a highest kinetic rate for UV-aged PE than that for bio-aged PE. The adsorption isotherm models revealed that the aging processes enhanced the HS adsorption tendency, as evidenced by the highest adsorption capacity for UV-aged PE (~187 μg C/m²), followed by bio-aged PE (~157 μg C/m²) and pristine PE (~87.5 μg C/m²) for a comparable extended aging period (15-18 days). The difference was more pronounced at a lower pH. The enhanced HS adsorption was mainly attributed to the formation of hydrogen bonds, whereas HS adsorption on pristine PE was dominated by hydrophobic interactions and weak van der Waals interactions. Among the two identified fluorescent components (terrestrial humic-like C1 and protein-like C2), C1 exhibited a higher affinity for adsorption onto PE irrespective of aging. Our findings provide insights into the substantial changes that occur in the interactions between MPs and aquatic organic matter with aging processes, which may alter the fate and environmental impacts of MPs in many aquatic systems.

The influence of nutrients on the composition and quantity of buried organic carbon in a eutrophic plateau lake, Southwest China

The regulation of lacustrine organic carbon (OC) burial by nutrient is an outstanding knowledge gap in the current understanding of lake carbon cycles. In this study, we determined how nutrients quantitatively correspond with OC burial using the parallel factor analysis (PARAFAC) method in Dianchi Lake, southwest China. Factors were classified into three types according to their historical sedimentation characteristics: the background factor (BF), response factor (RF), and contingency factor (CF). The BF represented the original OC input combination in the lake and was insensitive to nutrient changes. The RF represented the OC input combination that was induced or promoted by nutrient changes in the lake. The CF represented short-term discontinuous factors in sedimentary history, which may be related to unique historical events. The results indicate that changes in the total nitrogen (TN) to total phosphorus (TP) ratio correlated with changes in the BF contribution; whereas the quantity of OC was mainly correlated with TN. The >90% of OC buried in sediment was quantitatively simulated by BF and RF; the driving effect of RF on OC burial was approximately 13 times higher than that of BF. It was observed that a 1 mg kg^-1 increase in TN led to approximately 2.2 units increase in RF contribution in Dianchi Lake, while the BF was insensitive to changes in TN. Thus, changes in lake nutrients may effectively change the composition and quantity of OC buried in lake sediment.

Insights into graphene oxide/ferrihydrite adsorption as pretreatment during ultrafiltration: Membrane fouling mitigation and disinfection by-product control

In this study, a novel adsorbent of graphene oxide (GO) incorporated ferrihydrite (FH) was fabricated and integrated with ultrafiltration (UF) to remove natural organic matter (NOM), the crucial cause of membrane fouling and major precursor of disinfection by-products (DBPs). Compared with FH and powdered activated carbon (PAC), GO/FH exhibited superior removal for high molecular weight (HMW) humic- and fulvic-like substances and low molecular weight (LMW) protein. The cake layer formed by GO/FH alleviated the deposition of NOM on membrane surface or inside membrane pores. Therefore, GO/FH reduced 89% and 95% total fouling resistance and irreversible membrane resistance, respectively, together with the lowest increment of transmembrane pressure. Pearson correlation analysis indicated that DOC, rather than specific ultraviolet absorbance (SUVA) and UV₂₅₄, was significantly correlated to the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) when SUVA was below 4 L/mg-C.m. Whilst the HMW NOM (1-20 kDa) was highly related to dibromochloromethane (DBCM) (r = 0.98-1), the LMW fraction (< 1 kDa) was correlated with dibromochloromethane (TCAA) and dichloroacetic acid (DCAA) (r = 0.88-0.98). Inspiringly, GO/FH-UF reduced 90% of carbonaceous DBPs, the concentrations of which well met the WHO Guidelines. In summary, GO/FH-UF substantially alleviated membrane fouling and dramatically reduced DBP formation potential.

Adsorption of humic acids to lake sediments: Compositional fractionation, inhibitory effect of phosphate, and implications for lake eutrophication

Humic acid (HA) and phosphate interactions play a vital role in the biogeochemical cycle of carbon and nutrients and thus the trophic state of a lake. The adsorption behavior of HAs to sediments in the absence and presence of phosphate was investigated in this study. Three types of HAs were used, AHA from algae-dominated lake sediments, MHA from macrophyte-dominated lake sediments, and a reference HA (RHA) with terrestrial sources. The adsorption capacity of lake sediments was highest for AHA, which can be explained by that AHA contained more carboxyl-containing molecules, proteinaceous compounds and polysaccharides that were preferentially adsorbed by minerals. Phosphate showed a stronger inhibitory effect on MHA adsorption than on AHA adsorption, suggesting that AHA can more effectively replace phosphate adsorbed to sediments. Our findings show that the functional groups of organic compounds control not only their fractionation and burial but also their ability to replace phosphate in sediments. We propose a novel mechanism to explain the legacy effect of lake eutrophication. That is, as lakes shift from a macrophyte-dominated state to more eutrophic, algae-dominated state, increasing algae-derived organic compounds can promote the release of phosphate from sediments, forming a positive feedback loop that sustains internal phosphorus loading and hence lake eutrophication.

A 3D Fluorescence Classification and Component Prediction Method Based on VGG Convolutional Neural Network and PARAFAC Analysis Method

Three-dimensional fluorescence is currently studied by methods such as parallel factor analysis (PARAFAC), fluorescence regional integration (FRI), and principal component analysis (PCA). There are also many studies combining convolutional neural networks at present, but there is no one method recognized as the most effective among the methods combining convolutional neural networks and 3D fluorescence analysis. Based on this, we took some samples from the actual environment for measuring 3D fluorescence data and obtained a batch of public datasets from the internet species. Firstly, we preprocessed the data (including two steps of PARAFAC analysis and CNN dataset generation), and then we proposed a 3D fluorescence classification method and a components fitting method based on VGG16 and VGG11 convolutional neural networks. The VGG16 network is used for the classification of 3D fluorescence data with a training accuracy of 99.6% (as same as the PCA + SVM method (99.6%)). Among the component maps fitting networks, we comprehensively compared the improved LeNet network, the improved AlexNet network, and the improved VGG11 network, and finally selected the improved VGG11 network as the component maps fitting network. In the improved VGG11 network training, we used the MSE loss function and cosine similarity to judge the merit of the model, and the MSE loss of the network training reached 4.6 × 10−4 (characterizing the variability of the training results and the actual results), and we used the cosine similarity as the accuracy criterion, and the cosine similarity of the training results reached 0.99 (comparison of the training results and the actual results). The network performance is excellent. The experiments demonstrate that the convolutional neural network has a great application in 3D fluorescence analysis.

Interaction of heavy metals and biocide/herbicide from stormwater runoff of buildings with dissolved organic matter

Stormwater runoff from roofs and façades can be contaminated by heavy metals and biocides/herbicides. High efficiency on-site treatment methods are now urgently needed to safeguard the ecosystem. The basis for developing such treatment facilities is an in-depth understanding of their interactions with dissolved organic matter (DOM), as this affects their migration in the environment. Hence, the interactions between copper (Cu), zinc (Zn), benzyl-dimethyl-tetradecylammonium chloride dihydrate (BAC), mecoprop-P (MCPP) and DOM at pH 5 to 9 were investigated separately in this study. The evaluation of the interaction processes was achieved by applying excitation emission matrix and parallel factor analysis (EEM-PARAFAC) to titration samples; obtained data were fitted by two different models. Mechanisms involved in BAC/MCPP-DOM interactions were revealed by Fourier-transform infrared spectroscopy (FTIR) and two-dimensional correlation spectrum (2D-COS) analysis. Results showed that the applied DOM was composed of the two different fluorescent components C1 and C2. More interaction with C1 than with C2 was observed for both Cu/Zn and BAC/MCPP. Increasing the pH enhanced the interactions between Cu/Zn and DOM. At pH 5 with a maximum quencher addition, the remaining fluorescence of CuC1 and ZnC1 were 15.7% and 87.1%, respectively. Corresponding data at pH 9 decreased to 3% and 69.5%. Contrarily, interactions between BAC/MCPP and DOM were impaired by high pH conditions. The increase of pH from 5 to 9 with maximum BAC and MCPP added raised the remaining fluorescence of BAC-C1 and MCPP-C1 by 15.9% and 21.3% separately. The fitting outcomes from the Ryan-Weber equation (Cu/Zn titration) and the Stern-Volmer equation (BAC/MCPP titration) corresponded well with the titration studies. FTIR coupled with 2D-COS analysis revealed that mechanisms involved in BAC/MCPP titration include hydrogen bonding, π-π interaction, and electrostatic effect. The order of mechanisms taking effect during the interaction with DOM is affected by the molecular structure of BAC and MCPP.

Enhanced adsorption of humic/fulvic acids onto urea-derived graphitic carbon nitride

Since humic substances (HSs) can cause environmental problems, their elimination has been attracting more and more concerns. In this study, we investigated HSs adsorption onto urea-derived graphitic carbon nitride (CNU) and elucidated adsorption mechanisms (i.e. heterogeneity, interface rearrangement, and multiple interactions). The adsorption capacity of CNUs was enhanced as increasing calcination temperature and time. Among CNUs, CNU-575-3 showed the highest adsorption capacity; the maximum adsorption capacities for humic acid (HA) and fulvic acid (FA) were 164.06 mg C/g, 14.61 L/cm·g, 91.12 mg C/g, and 5.34 L/cm·g, respectively. The adsorption affinity of CNUs mainly correlated with the amount of amino groups, and that of HSs components was dependent on aromaticity due to π-π interactions. More specifically, terrestrial humic-like and fulvic-like components within HA and FA showed the greatest adsorption affinity, respectively. HSs adsorption was remarkably affected by pH, alkali metals, and alkali earth metals via electrostatic interactions, H-bonding, cation bridge, and configurational effect. In addition, the adsorption of Elliott soil HA (ESHA) and the landfill leachate concentrate by CNUs was also highly efficient. This study shows the great promise of CNUs for HSs adsorption in waters and wastewaters.

Tracing dissolved organic matter in inflowing rivers of Nansi Lake as a storage reservoir: Implications for water-quality control

Quantitative characterization of dissolved organic matter (DOM) in various aquatic ecosystems has become of increasing importance as its transformation plays a key role in inland water carbon, yet few studies have quantified water DOM inputs to storage lakes for water quality control and safety assurance. This study assessed the quantity and quality of DOM in 21 inflow rivers of Nansi Lake as the important storage lake of large-scale water transfer projects by using excitation-emission matrix spectroscopy coupled with parallel factor analysis (EEM-PARAFAC) and ultraviolet-visible (UV-Vis) spectroscopy. The results showed that DOM contents varied significantly with an average value of 5.8 mg L^-1 in different inflow rivers, and three fluorescence substances (including UVC humic-like, UVA humic-like and tyrosine-like components) were identified by EEM-PARAFAC. The distribution of the DOM components was distinctively different among sampling sites, and UVA humic-like component mainly dominated in Nansi Lake. Meanwhile, DOM components with higher aromaticity and molecular weight were found in the west side of lake. Fluorescence spectral indexes manifested that the source of DOM was mainly from allochthonous or terrestrial input. Moreover, significant correlations between water quality and DOM characteristics were observed in Nansi Lake. These findings would be beneficial to understand the biogeochemical role and impact of DOM in inflowing rivers in the water-quality monitoring and control of storage lakes.

Exploring applicability of end member mixing approach for predicting environmental reactivity of dissolved organic matter

Despite the wide applications of end member mixing analysis (EMMA) for assigning the sources of dissolved organic matter (DOM) in aquatic environment, there was no study attempting to test the applicability of EMMA for predicting environmental reactivity of DOM. This study aimed to explore the feasibility of EMMA, or the concept of ideal mixing behavior of end members, for describing several well-known DOM reactivities using two DOM end member sources (i.e., soil and algae) at varying mixing ratios. The selected DOM reactivities were trihalomethane formation potential (THMFP), mineral adsorption amount, pyrene binding, membrane resistance, and biodegradation potential. Among the tested DOM functions, all were found to follow the ideal mixing behavior, presenting the linear relationships between the source mixing ratios and the tested reactivity with the R² value of >0.80. The ideal mixing behavior of the DOM functions was more pronounced than that based on several spectroscopic indicators derived from UV absorption and fluorescence spectroscopy. This study provided insight into potential applicability and limitation of EMMA approach in monitoring and predicting environmental functions of DOM in aquatic systems where identified DOM sources are mixed and vary dynamically with the mixing ratios.

Identification of groundwater pollution from livestock farming using fluorescence spectroscopy coupled with multivariate statistical methods

Extensive livestock farming has highly threatened groundwater quality, thereby necessitating a rapid and effective method to identify groundwater quality in such areas. Fluorescence spectroscopy has been recognized as an interpretable method for tracking anthropogenic influences on water quality, but its applicability in identifying the groundwater pollution from livestock farming remains unknown. In this study, the fluorescence characteristics of dissolved organic matter (DOM) in groundwater from a typical livestock farming area were investigated by using fluorescence excitation emission matrix (EEM)-parallel factor analysis (PARAFAC) coupled with multivariate statistical methods. The results showed that livestock farming significantly altered the content and composition of DOM in groundwater, and these effects were mainly observed in shallow groundwater in the study area. Hierarchical cluster analysis based on fluorescence parameters divided the groundwater samples into three clusters with significantly different pollution degrees: Cluster A, unpolluted; Cluster B, highly polluted; Cluster C, moderately polluted. In particular, the intensity of tryptophan-like fluorescence was high in the polluted groundwater but was almost undetectable in the unpolluted groundwater, suggesting that it is a potential indicator of groundwater quality. Principal component analysis based on the fluorescence parameters explained 91.5% of the variance with the first two principal components, and revealed that the degree of pollution dominated the fluorescence characteristics of groundwater in the study area. In addition, NO₃^- was abundant in Clusters B and C, while it was low in Cluster A, validating the analysis results of fluorescence spectroscopy. These findings indicated that DOM fluorescence was sensitive to livestock farming pollution and could be applied to identify, monitor, and assess groundwater pollution from livestock farming.

Impacts of aeration and biochar on physiological characteristics of plants and microbial communities and metabolites in constructed wetland microcosms for treating swine wastewater

Constructed wetlands (CWs) by modifying operation strategies or substrates have grown in popularity in recent years for improving the treatment capacity. However, few studies focused on the responses of wetland vegetation and associated microorganisms in CWs for treating high-strength wastewaters. This study evaluated the long-term responses of plants and microbes in CWs with biochar and intermittent aeration for treating real swine wastewater. The results showed that intermittent aeration or combined with biochar could decrease the stress response of wetland plants against the swine wastewater. Biochar addition promoted the production of extracellular polymeric substances (EPS, total 516.27 mg L^-1) mainly including protein-like, humic-like and tryptophan-like components. However, intermittent aeration resulted in the EPS reduction (99.24 mg L^-1). As for microbial communities, biochar addition supported rich and diverse microbial communities (652 OTUs), while the combination with biochar and aeration could not improve diversity of microbes (597 OTUs). Additionally, the combination altered the microbial community structures and changed microbial composition correlated with environmental factors.

The release inhibition of organic substances from microplastics in the presence of algal derived organic matters: Influence of the molecular weight-dependent inhibition heterogeneities

As the emerging contaminants, the behavior and fate of microplastics (MPs) were highly related to the interactions with surrounding organic matters. However, information on the effects of molecular sizes of organic matters on the interaction is still lacking. In this study, the bulk algal-derived organic matter (AOM) samples were obtained and further fractionated into high molecular weight (HMW-, 1kDa-0.45 μm) and low molecular weight (LMW-, < 1 kDa) fractions. The interaction between MPs [polyethylene (PE) and polystyrene (PS)] and these MW-fractionated AOMs were characterized by dissolved organic carbon, fluorescence and absorbance spectroscopy, and fourier transform infrared (FTIR) analysis. Results showed that presence of AOM could effectively inhibit the release of additives from MPs. Further analysis found that the inhibition extents decreased in the order of HMW- > bulk > LMW-AOM. The absorbance and fluorescence spectroscopy showed that aromatic protein-like substances in HMW fraction exhibited higher adsorption affinity to MPs than the bulk and LMW counterparts. The strong sorption of aromatic substances may offer more binding sites for additives to inhibit the release of organic substances. Moreover, two dimensional FTIR correlation spectroscopy revealed that the HMW non-aromatic substances were preferentially adsorbed onto PS, which led to an enhanced adsorption capacity to additives by forming H-bonding. Therefore, the MW- and component-dependent heterogeneities of AOM samples must be fully considered in evaluating the environmental behavior of MPs.

Treatment of iodine-containing water by the UV/NH2Cl process: Dissolved organic matters transformation, iodinated trihalomethane formation and toxicity variation

UV/NH₂Cl process is becoming increasingly important for water treatment, while its impact on iodine-containing water remains unknown. In this study, the structure transformation of dissolved organic matters (DOMs), generation of iodinated trihalomethanes (I-THMs), and variation of acute toxicity were evaulated during the UV/NH₂Cl treatment of iodine-containing water. The combination of exciation emission matrix-parallel factor analysis and two-dimensional correlation spectroscopy integrated with synchronous fluorescence and infrared absorption spectroscopy showed that fulvic-like fraction of DOM was more susceptible to UV/NH₂Cl process and particularly iodo and polysaccharide groups gave the fastest resopnses. Consequently, UV fluence lower than 60 mJ/cm² promoted the production of I-THMs, while excessive UV exhausted NH₂Cl and reactive iodine species and subsequently reduced I-THM generation. Moreover, DOM concentration and source, NH₂Cl dosage, and I^- concentration had significant impacts on I-THM formation in the UV/NH₂Cl process. Additionally, a positive correlation was found between acute toxicity variation and I-THM formation when treating iodine-containing waters with UV/NH₂Cl. These results together provide a comprehensive understanding on UV/NH₂Cl treatment of iodine-containing water.

Insights into Adsorption of Humic Substances on Graphitic Carbon Nitride

Graphitic carbon nitride (CN) has been widely used in environmental pollution remediation. However, the adsorption of organic compounds on CNs, which has practical significance for the environmental application of CNs, is poorly understood. For the first time, this study systematically investigated the adsorption behaviors and mechanisms of humic substances (HSs), i.e., humic acid (HA) and fulvic acid (FA), on CNs derived from four typical precursors. Intriguingly, CN derived from urea (CN-U) showed a great capacity for HS adsorption due to its porous structure and large surface area, with maximum adsorption amounts of 73.24 and 51.62 mgC/g for HA and FA, respectively. The formation, influencing factors, and relative contributions of multiple interactions to HS adsorption on CNs were thoroughly elucidated. HS adsorption on CNs was mainly mediated by electrostatic interactions, π-π interactions, and H-bonding. The dominance of electrostatic interactions resulted in HS adsorption being highly dependent on pH and ionic strength. HS components with high aromaticity and high molecular weight were preferentially adsorbed due to π-π interactions. These multiple interactions were largely affected by amino groups and tri-s-triazine units of CNs, as well as the moieties of aromatic rings and oxygen-containing groups of HSs.

Characterization of dissolved organic matter for understanding the adsorption on nanomaterials in aquatic environment: A review

Nanomaterials (NMs) have received tremendous attention as emerging adsorbents for environmental applications. The ever-increasing release into aquatic systems and the potential use in water treatment processes heighten the likelihood of the interactions of NMs with aquatic dissolved organic matter (DOM). Once DOM is adsorbed on NMs, it substantially modifies the surface properties, thus altering the fate and transport of NMs, as well as their toxic effects on (micro)organisms in natural and engineered systems. The environmental consequences of DOM-NMs interaction have been widely studied in the literature. In contrast, a comprehensive understanding of DOM-NM complexes, particularly regarding the controlling factors, is still lacking, and its significance has been largely overlooked. This gap in the knowledge mainly arises from the complex and heterogeneous structures of the DOM, which prompts the urgent need to further characterize the DOM properties to deepen the understanding associated with the adsorption processes on NMs. This review aims to provide in-depth insights into the complex DOM adsorption behavior onto NMs, whether they are metal- or carbon-based materials. First, we summarize the up-to-date analytical methods to characterize the DOM to unravel the underlying adsorption mechanisms. Second, the key DOM characteristics governing the adsorption processes are discussed. Next, the environmental factors, such as the nature of adsorbents and solution chemistry, affecting the DOM-NM interactions, are identified and discussed. Finally, future studies are recommended to fully understand the chemical traits of DOM upon its adsorption onto NMs.

Environmentally Induced Changes of Commercial Carbon Nanotubes in Aqueous Suspensions. Adaptive Behavior of Bacteria in Biofilms

The effects of environmental factors such as sunlight irradiation and the presence of humic acid (HA) on the physicochemical properties of commercial multiwall carbon nanotubes (MWCNT) suspended in a simulated inorganic matrix (SIM) and their impacts on bacteria growing in biofilms were evaluated. Both solar irradiation and the presence of HA lead to the dissolution of adsorbed metals on the MWCNT, which are residues of synthesis catalysts. Also, preferential adsorption of certain HA components on the MWCNT induces important modifications in the aliphatic/aromatic relationship of HA components in solution and the generation and release of new moieties. Results demonstrated that the variation of such physicochemical parameters strongly affects the interactions of MWCNT with Pseudomonas aeruginosa sessile bacteria. Thus, the number of attached bacteria increased, and stress responses such as decrease in bacterial size were found in the presence of sunlight-irradiated MWCNT with a particular distribution of extracellular polymeric substances (EPS) strands. A shielding effect was observed when HA was added. It was concluded that physicochemical alterations caused by environmental conditions (with/without irradiation, presence/absence of HA) on MWCNT-containing SIM trigger distinctive adaptive behavior of bacteria in biofilms. This information must be taken into account in the development of biologically assisted treatments for organic metal co-contamination of MWCNT-containing media since MWCNT discharge alters the physicochemical properties and composition of the aqueous environment and the response of the biofilms that interact with it.

Effect of ozone pretreatment on characteristics of dissolved organic matter formed in aerobic and anaerobic digestion of waste-activated sludge

The characteristics of dissolved organic matter (DOM) formed in aerobic and anaerobic digestion of waste-activated sludge (WAS) after ozone pretreatment were investigated with three ozone dosages (4.72, 10.96, and 13.8 mg O₃/min) and four ozonation times (0, 10, 20, and 30 min) using six aerobic and six anaerobic digestion reactors. High decreasing rate of volatile suspended solid/total suspended solid indicated enhanced destruction of volatile solids and efficient sludge reduction. The results of TOC and UV absorbance indicated that increasing ozone dosage and time significantly enhanced hydrolysis and degradation of DOM. Data analysis with a first-order sequential reaction model revealed that, for aerobic digestion, k_h increased in the range of 0.00049-0.00154 day^-1; and for anaerobic digestion of WAS, k_h increased in the range of 0.00302-0.00796 day^-1 and k_d increased in the range of 0.24910-0.54548 day^-1. Detailed analysis of the composition of DOM showed that ozone pretreatment increased irreversible membrane resistance (IMR) and enhanced the breakdown of large DOM molecules, the formation of aromatic proteins, and tryptophan- and tyrosine-aromatic amino acids, as well as the accumulation of humic acid- and fulvic acid-like substances.

A solar photo-thermochemical hybrid system using peroxydisulfate for organic matters removal and improving ultrafiltration membrane performance in surface water treatment

Solar energy is considered one of the most promising energy sources for the degradation of pollutants in the water treatments. An innovative solar photo-thermochemical system involving peroxydisulfate (PDS) as an oxidant and xenon lamp as a solar irradiation light source was applied with hopes to degrade organic matters and alleviate the ultrafiltration (UF) membrane fouling when treating the real surface water. Moreover, heat-activated PDS pretreatment was used as a comparison to explore the respective proportions of solar light and heating effects, finding that solar light effect dominated the activation of PDS to degrade natural organic matters (NOMs) when the reaction temperature was below 50 °C and they both contributed to the production of free radicals at the temperature of >50 °C. The results indicated that solar-activated PDS pretreatment significantly alleviated membrane fouling caused by Songhua River water with the highest transmembrane pressure (TMP) reduction of approximately 69.6% at 70 °C. Organic substances (characterized by DOC, UV₂₅₄ and the maximum florescent intensity) and micropollutant (atrazine) in the feed water were better degraded in the presence of solar light. Both total fouling index (TFI) and hydraulic irreversible fouling index (HIFI) were moderate correlated with the UV₂₅₄ and DOC, whereas remarkably correlated with the F_max of component 2 (C2) and component 3 (C3). In addition, no significant correlation was observed between fouling indexes (TFI and HIFI) and the F_max of component 1 (C1). The membrane irreversible fouling was attributed to the accumulation of cake layers mainly composed of protein-like substances on the membrane surface. Solar-activated PDS pretreatment would efficiently degrade the protein-like substances and terrestrially derived humic-like matters to control UF membrane fouling. The findings are beneficial to develop new strategies for membrane fouling alleviation based on the solar irradiation and PDS oxidation.

Adsorption and molecular weight fractionation of dissolved organic matters with different origins on colloidal surface

Dissolved organic matter (DOM) adsorption on colloid surface occurred ubiquitously in aquatic ecosystems, while variations in molecular weight (MW) distribution during adsorption remained poorly understood. In this study, the adsorption and MW fractionation of aquatic DOMs with different origins (e.g., macrophyte- and algae-derived, MDOM and ADOM, respectively) on colloid surface were examined using total organic carbon, absorption and fluorescence spectroscopy, and flow field flow fractionation (FlFFF) analysis. Both the total organic carbon and spectroscopic results showed the predominant adsorption of DOMs within the first 45 min, which behaved not synchronously with MW fractionation. Quantitative FlFFF analysis further indicated that the organic ligands with different MWs exhibited different adsorption affinities on colloid surface. It was found that 5-15 kDa and 50 kDã0.45 μm were preferential adsorption fraction for humic- and protein-like MDOM, respectively, while 0.3-2 kDa and 0.3-50 kDa were preferential adsorption fraction for humic- and protein-like ADOM, respectively. Therefore, the MW fractionation of DOMs upon adsorption was highly dependent on DOM origins as well as specific components. Results obtained herein can enlarge our insights into adsorption and the resultant behavior and fate of DOMs that were highly related with the MW fractionation in aquatic environments.

Dissolved organic matter and bacterial population changes during the treatment of solid potato waste in a microbial fuel cell

This study investigated the effect of mixed feeding of anaerobically cultured waste activated sludge (WAS) on the performance of microbial fuel cells (MFCs) in the treatment of solid potato waste. The maximum current densities of the four MFCs was estimated as 36, 5, 10 and 150 mA/m², with the columbic efficiencies of 6.1, 0.3, 0.9 and 31.1%, respectively. Composition changes of dissolved organic matter (DOM) coupled with its interrelation with electricity generation and total and viable bacterial population at the end of the operation were investigated. The experimental results demonstrated that mixing WAS into solid potato enhanced the presence of the tyrosine-like aromatic amino acids and aromatic protein-like substances from the beginning of the operation and promoted hydrolysis and humification of the solid potato. In the final solution of the anodic chamber, more viable bacteria were detected for the reactors treating solid potato alone and the mixed feedstock with the smaller amount of sludge, where distinct electricity generation was observed.

Exploring the relative changes in dissolved organic matter for assessing the water quality of full-scale drinking water treatment plants using a fluorescence ratio approach

This study aims to extend and demonstrate the application of fluorescence spectroscopy for monitoring the water quality of three differently operated full-scale drinking water treatment plants located in the Shenzhen city (China). A ratio of fluorescent dissolved organic matter (FDOM), which describes relative changes in humic-like to protein-like fluorescence, was used to explain mechanisms behind the physicochemical processes. The fluorescence components obtained through individual and combined parallel factor analysis (PARAFAC) modeling revealed the presence of humic-like (C1) and protein-like (C2) structures in the DOM. The C1/C2 ratio provided a direct relationship between the seasonal variations and DOM composition. Wet season generated DOM enriched with humic-like fluorescence, while dry season caused a higher release of protein-like fluorescence. The fluorescence ratio presented unique patterns of DOM in treatment trains. The chemical pretreatment and disinfection unit processes showed a higher tendency to remove the humic-like fluorescence. However, the C1/C2 ratio increased during physical treatment processes such as coagulation-precipitation and sand filtration, indicating preferential removal of protein-like fluorescence. The DOM composition in influent directly (R² = 0.77) influenced the relative intensities of fluorescence components in the treated water. Compared to the dry season, the wet season caused significant changes in DOM composition and produced treated water enriched with humic-like fluorescence. This fluorescence ratio offers an approach to explore the role of different treatment units and determine the factors affecting the composition of DOM in the surface water and drinking water treatment plants.

Degradation characteristics of dissolved organic matter in nanofiltration concentrated landfill leachate during electrocatalytic oxidation

Nanofiltration concentrated landfill leachate (NCLL) is produced during the integration process of biodegradation and nanofiltration, containing a large amount of recalcitrant dissolved organic matter (DOM). In this work, electrocatalytic oxidation technology was employed to degrade DOM in NCLL and spectroscopic technology was applied to explore the structural changes. The results showed that under the optimal experimental condition (pH = 2.0, NaCl concentration = 0.7%, Fe₂(SO₄)₃ concentration = 0.8%, the retention time = 6 h), the removal rates of COD, TOC, and UV₂₅₄ were 99.0%, 57.4%, 99.3% respectively. Ultraviolet-Visible (UV-Vis) spectral analysis showed that aromatic CC can be effectively degraded by electrocatalytic oxidation, resulting in decreases of aromaticity and molecular weight in NCLL. Two fluorescent components (terrestrial humic-like substances and fulvic-like substances) were identified in NCLL by parallel factor analysis, which can be effectively removed by electrocatalytic oxidation with removal rates of 99.9% and 90.5%, respectively. In addition, through two-dimensional correlation spectroscopic analysis, the sequence of structural changes of the DOM in NCLL was confirmed: unsaturated double bonds → fulvic-like components/aromatic structures → terrestrial humic-like components. These spectral characterization techniques can provide a deep understanding of the degradation pathways of DOM and provide new insights for the treatment of NCLL.

Effect of Adding Drinking Water Treatment Sludge on Excess Activated Sludge Digestion Process

Drinking water treatment sludge (DWTS) is a waste by-product from water treatment plants where aluminum and iron salts are the most commonly used coagulants. DWTS was reused to investigate the effects of DWTS on the digestion liquid quality and microorganism activity of excess activated sludge (EAS). DWTS with four suspended solid (SS) concentrations (0%, 2%, 5% and 10%) was added to EAS which was sampled during aerobic and anaerobic digestion processes, then batch tests were carried out which followed the coagulation-flocculation process. It was found that DWTS can improve total dissolved nitrogen (TDN) and dissolved phosphorus (DP) removal efficiencies for anaerobic EAS. The highest removal efficiency of TDN (29.97%) as well as DP (55.38%) was observed when DWTS dosage was SS = 10%. The release of dissolved organic matter (DOM) by DWTS could increase dissolved organic carbon (DOC) concentration and lead to the accumulation of non-biodegradable humic acid-like substance in aerobic and anaerobic digestion liquid. The dehydrogenase activity (DHA) values of anaerobic EAS were higher than aerobic EAS. DWTS could reduce DHA for both EAS. These results indicate that potential risk of release of DOM should be considered when reusing DWTS in future research.