Long-term natural remediation process in textile dye-polluted river sediment driven by bacterial community changes

Development of inorganic and mixed matrix membranes for application in toxic dyes-contaminated industrial effluents with in-situ treatments

Dyes are the most ubiquitous organic pollutants in industrial effluents. They are highly toxic to both plants and animals; thus, their removal is paramount to the sustainability of ecosystem. However, they have shown resistance to photolysis and various biological, physical, and chemical wastewater remediation processes. Membrane removal technology has been vital for the filtration/separation of the dyes. In comparison to polymeric membranes, inorganic and mixed matrix (MM) membranes have shown potentials to the removal of dyes. The inorganic and MM membranes are particularly effective due to their high porosity, enhanced stability, improved permeability, higher enhanced selectivity and good stability and resistance to harsh chemical and thermal conditions. They have shown prospects in filtration/separation, adsorption, and catalytic degradation of the dyes. This review highlighted the advantages of the inorganic and MM membranes for the various removal techniques for the treatments of the dyes. Methods for the membranes production have been reviewed. Their application for the filtration/separation and adsorption have been critically analyzed. Their application as support for advanced oxidation processes such as persulfate, photo-Fenton and photocatalytic degradations have been highlighted. The mechanisms underscoring the efficiency of the processes have been cited. Lastly, comments were given on the prospects and challenges of both inorganic and MM membranes towards removal of the dyes from industrial effluents.

Green synthesis of silver and iron nano composites using aqueous extract of zanthoxylum armatum seeds and their application for removal of acid black 234 dye

Green nanotechnology has gained attraction in recent years due to the growing awareness of the environmental and health risks associated with traditional methods of nanomaterial synthesis. In the present study, nanocomposite (NCs) of silver and Iron were prepared using Zanthoxylum Armatum seeds aqueous extract which acts as a reducing, stabilizing, and capping agent. The synthesized NCs were characterized using UV/Vis Spectroscopy, powder X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and EDX. The UV/Vis spectroscopy analysis of the NCs revealed the presence of a surface plasmonic resonance band occurring at 420 nm. Examination of the NCs through SEM demonstrated that they exhibited a nearly spherical morphology, with an average particle diameter measuring 54.8 nm. The crystalline nature of these NCs was verified through X-ray diffraction (XRD), and the calculation of crystallite size using the Scherrer-Debye equation yielded a value of 12.6 nm. The adsorption ability of newly synthesized nanocomposites was investigated against Acid Black 234 Dye. The results showed that a 0.5 g of NCs dose at pH 4 removed 99.3% of 10 mg/L of Acid Black 234 Dye within 60 min. Based on the findings of this research, it can be inferred that the that Ag-Fe NCs synthesized from Zanthoxylum Armatum seeds aqueous extract hold significant potential for addressing environmental pollution caused by Acid Black 234 Dye. The NCs were used as adsorbent for the removal of Acid Black 234 dye from the wastewater sample and showed 98% removal of dye from the commercial sample within 60 min. In this context, the research highlights that the environmentally friendly synthesis of Ag-Fe nanocrystals (Ag-Fe NCs) using Zanthoxylum Armatum as a mediator offers an efficient and cost-effective solution for mitigating environmental pollution.

Contamination of textile dyes in aquatic environment: Adverse impacts on aquatic ecosystem and human health, and its management using bioremediation

Textile dyes are the burgeoning environmental contaminants across the world. They might be directly disposed of from textile industries into the aquatic bodies, which act as the direct source for the entire ecosystem, ultimately impacting the human beings. Hence, it is essential to dissect the potential adverse outcomes of textile dye exposure on aquatic plants, aquatic fauna, terrestrial entities, and humans. Analysis of appropriate literature has revealed that textile dye effluents could affect the aquatic biota by disrupting their growth and reproduction. Various aquatic organisms are targeted by textile dye effluents. In such organisms, these chemicals affect their development, behavior, and induce oxidative stress. General populations of humans are exposed to textile dyes via the food chain and drinking contaminated water. In humans, textile dyes are biotransformed into electrophilic intermediates and aromatic amines by the enzymes of the cytochrome family. Textile dyes and their biotransformed products form the DNA and protein adducts at sub-cellular moiety. Moreover, these compounds catalyze the production of free radicals and oxidative stress, and trigger the apoptotic cascades to produce lesions in multiple organs. In addition, textile dyes modulate epigenetic factors like DNA methyltransferase and histone deacetylase to promote carcinogenesis. Several bioremediation approaches involving algae, fungi, bacteria, biomembrane filtration techniques, etc., have been tested and some other hybrid systems are currently under investigation to treat textile dye effluents. However, many such approaches are at the trial stage and require further research to develop more efficient, cost-effective, and easy-to-handle techniques.

Microbial communities drive flux of acid orange 7 and crystal violet dyes in water-sediment system

Unchecked dye effluent discharge poses escalating environmental and economic concerns, especially in developing nations. While dyes are well-recognized water pollutants, the mechanisms of their environmental spread are least understood. Therefore, the present study examines the partitioning of Acid Orange 7 (AO7) and Crystal Violet (CV) dyes using water-sediment microcosms and reports that native microbes significantly affect AO7 decolorization and transfer. Both dyes transition from infused to pristine matrices, reaching equilibrium in a fortnight. While microbes influence CV partitioning, their role in decolorization is minimal, emphasizing their varied impact on the environmental fate of dyes. Metagenomic analyses reveal contrasting microbial composition between control and AO7-infused samples. Control water samples displayed a dominance of Proteobacteria (62%), Firmicutes (24%), and Bacteroidetes (9%). However, AO7 exposure led to Proteobacteria reducing to 57% and Bacteroidetes to 3%, with Firmicutes increasing to 34%. Sediment samples, primarily comprising Firmicutes (47%) and Proteobacteria (39%), shifted post-AO7 exposure: Proteobacteria increased to 53%, and Firmicutes dropped to 38%. At the genus level, water samples dominated by Niveispirillum (34%) declined after AO7 exposure, while Bacillus and Pseudomonas increased. Notably, Serratia and Sphingomonas, known for azo dye degradation, rose post-exposure, hinting at their role in AO7 decolorization. Conversely, sediment samples showed a decrease in the growth of Bacillus and an increase in that of Pseudomonas and Serratia. These findings emphasize the significant role of microbial communities in determining the environmental fate of dyes, providing insights on its environmental implications and management.

High biosorption of cationic dye onto a novel material based on paper mill sludge

The valorization of paper mill sludge (PMS) is the main goal of this study. The emissions of PMS continue to increase at global scale, especially from packaging paper and board sectors. The raw sludge was used to prepare an adsorbent to remove toxic pollutants from wastewater, the methylene blue (MB), an organic dye. Firstly, the physico-chemical characterization of PMS was done determining the crystalline phases of PMS fibers, the content of main elements, and the pH zero point charge, which was determined at around pH 7. The adsorption of MB on PMS powder was studied at 18 °C with an agitation of 200 rpm, being the best operating conditions 30 min of contact time, 250 mg L-1 of initial MB concentration and 0.05 g in 25 mL of adsorbent dose. Experimental data of MB adsorption was fitted to Langmuir and Freundlich isotherm equations. The Langmuir model was more accurate for the equilibrium data of MB adsorption at pH 5.1. The PFOM and PSOM were adjusted to experimental adsorption kinetics data, being PSOM, which describes better the MB adsorption by PMS powder. This was confirmed by calculating the maximum adsorption capacity with PSOM, which was 42.7 mg g-1, being nearly similar of the experimental value of 43.5 mg g-1. The analysis of adsorption thermodynamics showed that the MB was adsorbed exothermically with a ΔH0 = - 20.78 kJ mol-1, and spontaneously with ΔG0 from - 0.99 to - 6.38 kJ mol-1 in the range of temperature from 291 to 363 K, respectively. These results confirm that the sludge from paper industry can be used as biosorbent with remarkable adsorption capacity and low cost for the treatment of wastewater. PMS can be applied in the future for the depollution of the effluents from the textile industry, which are highly charged with dyes.

Revolutionizing fuel production through biologically synthesized zero-dimensional nanoparticles

The sustainable management of wastewater and the production of clean fuel with a reduced carbon footprint require innovative methods, including photocatalytic degradation of pollutants and hydrogen generation. To achieve this, biosynthesized photocatalysts are necessary, with carbon quantum dots (CQDs) being a promising candidate for achieving this goal. In this study, CQDs were prepared from water caltrop peels and a composite of greenly synthesized CQDs with copper selenide (CuSe) was used for the photocatalytic degradation of pollutants and production of fuel. Thymol blue (TB) and Congo red (CR) were chosen as model dyes for degradation studies, with optimized reaction conditions being determined by varying the dose, pH, intensity, and concentration of dyes. The composite (CuSe@CQDs) showed a degradation rate of 99.4% and 97.8% for TB and CR, respectively, within 60 minutes, with a corresponding hydrogen production rate of 2360 and 1875 μmol g-1 h-1. The yield of hydrogen production using the composite was 35.7 and 29 times greater than that of CuSe alone for TB and CR, respectively. Spectroscopic techniques such as XRD, UV-Vis, FESEM, HRTEM, XPS, FTIR, BET, and TGA were used to characterize the composite, and the results revealed that the composite had superior degradation rates compared to CuSe alone, with the degradation rate being enhanced by about three times. GCMS analysis was used to investigate the intermediate and possible degradation pathways. Overall, this study highlights the potential of biosynthesized CQDs as effective photocatalysts for the sustainable management of wastewater and production of fuel.

EfectroH2O: Development and evaluation of a novel treatment technology for high-brine industrial wastewater

Textile production is one of the main sources of freshwater consumption by industries worldwide. In addition, according to the world bank, 20 % of the wastewater generated globally is caused by textile wet-processing. Textile wet-processing includes the processes in textile production where garments are dyed or given the final functions like water-repellency. Several thousand chemicals were used in this process, some of which are highly toxic. Discharging untreated or insufficiently treated wastewater in water bodies results in high pollution levels, severely impacting the environment and human health. Especially in textile-producing countries like India, environmental pollution and water consumption from textile wet-processing have severe impacts. Next to the high volume of chemicals used in textile production, the high salt concentration in textile wastewater also poses a challenge and is critical for freshwater systems. Moreover, textile wastewater is one of the most difficult to treat wastewater. Currently, used treatment technologies do not meet the requirements to treat textile wastewater. Therefore, the further development of efficient treatment technologies for textile wastewater is critically important. Hence, in the interdisciplinary project, effect-based monitoring demonstrates the efficiency of electrically-driven water treatment processes to remove salts and micropollutants from process water (EfectroH₂O), a low-energy Zero Liquid Discharge (ZLD) textile wastewater treatment technology is being developed consisting of a combination of capacitive deionization (CDI) and advanced oxidation processes (AOP). In addition to treatment technology development, methods for evaluating the efficiency of treatment technologies also need to be improved. Currently, mainly physicochemical parameters such as pH, biochemical oxygen demand (BOD) and chemical oxygen demand (COD) are tested worldwide to check water quality. However, these methods are insufficient to make a statement about the toxic potential of such complex mixtures as textile wastewater. Therefore, also next to chemical analyses, effect-based methods (EBM) are used to verify the treated wastewater.

Microbial biosorbent for remediation of dyes and heavy metals pollution: A green strategy for sustainable environment

Toxic wastes like heavy metals and dyes are released into the environment as a direct result of industrialization and technological progress. The biosorption of contaminants utilizes a variety of biomaterials. Biosorbents can adsorb toxic pollutants on their surface through various mechanisms like complexation, precipitation, etc. The quantity of sorption sites that are accessible on the surface of the biosorbent affects its effectiveness. Biosorption’s low cost, high efficiency, lack of nutrient requirements, and ability to regenerate the biosorbent are its main advantages over other treatment methods. Optimization of environmental conditions like temperature, pH, nutrient availability, and other factors is a prerequisite to achieving optimal biosorbent performance. Recent strategies include nanomaterials, genetic engineering, and biofilm-based remediation for various types of pollutants. The removal of hazardous dyes and heavy metals from wastewater using biosorbents is a strategy that is both efficient and sustainable. This review provides a perspective on the existing literature and brings it up-to-date by including the latest research and findings in the field.

Efficient and recyclable degradation of organic dye pollutants by CeO2@ZIF-8 nanozyme-based non-photocatalytic system

Advanced oxidation processes-based catalysis system as the most typical pollutant degradation technology always suffer from poor durability and photo-dependent. Inspired by the fact that some nanomaterials exhibit catalytic properties closer to natural enzymes, a high peroxidase-like activity and stability CeO₂@ZIF-8 nanozyme was synthesized in this study for non-photodegradation of dyes pollution. Multiple characterization techniques were applied to prove the successful synthesis of the nanozyme. The influence of different parameters on the catalytic degradation of organic dye by nanozyme was investigated. This nanozyme achieved a maximum degradation efficiency of 99.81% for methyl orange and maintained its catalytic performance in repeated experiments. Possible degradation intermediates and pathways for methyl orange were then proposed. In addition, the CeO₂@ZIF-8 loaded starch/agarose films were prepared for the portable and recyclable remediation of real dye wastewater, which maintained more than 80% degradation efficiency after 5 successive cycles. These results suggested that nanozyme based non-photocatalytic system is a potential catalyst for dye degradation and it opens a new avenue to develop high-performance and recyclable catalysts for pollutant remediation.

Performance and mechanism of azo dyes degradation and greenhouse gases reduction in single-chamber electroactive constructed wetland system

A single-chamber microbial fuel cell-microbial electrolytic cell with a novel constructed wetland system was proposed for synergistic degradation of congo red and reduction in emissions of greenhouse gases. The closed-circuit system showed higher chemical oxygen demand and congo red removal efficiencies by 98 % and 96 % on average, respectively, than traditional constructed wetland. It could also significantly reduce the emissions of CH₄ and N₂O (about 52 % CO₂-equivalents) by increasing the electron transfer. Microbial community analysis demonstrated that the progressive enrichment of dye-degrading microorganisms (Comamonas), electroactive bacteria (Tolumonas, Trichococcus) and denitrifying microorganisms (Dechloromonas) promoted pollutant removal and electron transfer. Based on gene abundance of xenobiotics biodegradation, the congo red biodegradation pathway was described as congo red → naphthalene and alcohols → CO₂ and H₂O. In summary, the single-chamber closed-circuit system could significantly improve the degradation of congo red and reduce the emissions of greenhouse gases by influencing electron transfer and microbial activity.

Pulsed-Laser Induced Photolysis of Synthesizing Magnetic Fe3O4 Nanoparticles for Visible-Light Photocatalysis

Our report is the first example describing the successful synthesis of magnetic Fe3O4 nanoparticles (NPs), for which we used pulsed-laser induced photolysis (PLIP). Compared with the previous method of using pulsed-laser ablation of a target, or strong energy of pulsed-laser light to decompose precursors in generating a solvated-ion reaction, the PLIP method used here is dependent on hydrogen peroxide (H2O2) to generate a hydrolysis reaction. Energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) were used to demonstrate the Fe3O4 crystalline structure of the synthesized NPs. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images revealed that the average size of the NPs was about 20–50 nm. Regarding their magnetic characteristics, the synthesized NPs exhibited a saturation magnetization of 5.62 emu/g, remanence of 3.82 emu/g, and coercive force of 49.8 Oe. The photocatalytic experiments confirmed that the synthesized magnetic Fe3O4 NPs have visible light-degradation effects based on their ability to photocatalytically degrade methylene blue (MB). The MB degradation efficiency was 60–80% under white-light exposure for 180 min. This study presents a new route for synthesizing magnetic Fe3O4 NPs for their potential use in photocatalysis.

A microcosm approach for evaluating the microbial nonylphenol and butyltin biodegradation and bacterial community shifts in co-contaminated bottom sediments from the Gulf of Finland, the Baltic Sea

Pollution of aquatic ecosystems with nonylphenol (NP) and butyltins (BuTs) is of great concern due to their effects on endocrine activity, toxicity to aquatic organisms, and extended persistence in sediments. The impact of contamination with NP and/or BuTs on the microbial community structure in marine sediments was investigated using microcosms and high-throughput sequencing. Sediment microcosms with NP (300 mg/kg) and/or BuTs (95 mg/kg) were constructed. Complete removal of monobutyltin (MBT) occurred in the microcosms after 240 days of incubation, while a residual NP rate was 40%. The content of toxic tributyltin (TBT) and dibutyltin (DBT) in the sediments did not change notably. Co-contamination of the sediments with NP and BuTs did not affect the processes of their degradation. The pollutants in the microcosms could have been biodegraded by autochthonous microorganisms. Significantly different and less diverse bacterial communities were observed in the contaminated sediments compared to non-contaminated control. Firmicutes and Gammaproteobacteria dominated in the NP treatment, Actinobacteria and Alphaproteobacteria in the BuT treatment, and Gammaproteobacteria, Alphaproteobacteria, Firmicutes, and Acidobacteria in the NP-BuT mixture treatment. The prevalence of microorganisms from the bacterial genera Halothiobacillus, Geothrix, Methanosarcina, Dyella, Parvibaculum, Pseudomonas, Proteiniclasticum, and bacteria affiliated with the order Rhizobiales may indicate their role in biodegradation of NP and BuTs in the co-contaminated sediments. This study can provide some new insights towards NP and BuT biodegradation and microbial ecology in NP-BuT co-contaminated environment.

A Minority Population of Non-dye-decolorizing Bacillus subtilis enhances the Azo Dye-decolorizing Activity of Enterococcus faecalis

Microbes live in communities in biological wastewater treatment plants and in the intestines. However, limited information is currently available on the mechanisms by which minority bacterial populations assist other bacteria besides syntrophic relationships as well as on the microbial food web. Therefore, the present study investigated the effects of non-dye-decolorizing Bacillus subtilis strain S4ga at population levels ranging between 0.04 and 4% on the activity of dye-decolorizing Enterococcus faecalis strain T6a1 using a dye decolorization assay. The results obtained revealed that the minority population of B. subtilis S4ga enhanced the dye-decolorizing activity of E. faecalis T6a1, resulting in a shorter lag time and longer active time of dye decolorization. These effects were related to redox potential values rather than O₂ concentrations. Comparisons of the extracellular metabolites in individual incubations of E. faecalis T6a1 and B. subtilis S4ga and a co-incubation suggested a mutual relationship through the cross-feeding of specific amino acids (tyrosine, methionine, tryptophan, phenylalanine, valine, and leucine from B. subtilis S4ga to E. faecalis T6a1; glutamine, histidine, aspartic acid, and proline from E. faecalis T6a1 to B. subtilis S4ga). An ana­lysis of intracellular primary metabolites indicated that the arginine deiminase (ADI) pathway, an ATP-producing energy-generating process, was more strongly activated in co-incubated E. faecalis T6a1 than in E. faecalis T6a1 incubated alone. These results suggest that a co-incubation with B. subtilis S4ga promoted ATP production by E. faecalis T6a1 cells and enhanced its dye-decolorizing activity.

Peroxidase enzymes as green catalysts for bioremediation and biotechnological applications: A review

The fast-growing consumer demand drives industrial process intensification, which subsequently creates a significant amount of waste. These products are discharged into the environment and can affect the quality of air, degrade water streams, and alter soil characteristics. Waste materials may contain polluting agents that are especially harmful to human health and the ecosystem, such as the synthetic dyes, phenolic agents, polycyclic aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, pesticides and drug substances. Peroxidases are a class oxidoreductases capable of performing a wide variety of oxidation reactions, ranging from reactions driven by radical mechanisms, to oxygen insertion into CH bonds, and two-electron substrate oxidation. This versatility in the mode of action presents peroxidases as an interesting alternative in cleaning the environment. Herein, an effort has been made to describe mechanisms governing biochemical process of peroxidase enzymes while referring to H₂O₂/substrate stoichiometry and metabolite products. Plant peroxidases including horseradish peroxidase (HRP), soybean peroxidase (SBP), turnip and bitter gourd peroxidases have revealed notable biocatalytic potentialities in the degradation of toxic products. On the other hand, an introduction on the role played by ligninolytic enzymes such as manganese peroxidase (MnP) and lignin peroxidase (LiP) in the valorization of lignocellulosic materials is addressed. Moreover, sensitivity and selectivity of peroxidase-based biosensors found use in the quantitation of constituents and the development of diagnostic kits. The general merits of peroxidases and some key prospective applications have been outlined as concluding remarks.

A comprehensive review on the removal of noxious pollutants using carrageenan based advanced adsorbents

Rapid industrial development is associated with high discharge of toxic pollutants into the environment. The industries discharge their wastewater containing organic pollutants directly into the water system without treating them that has posed many serious threats to environmental protection. The use of bioadsorbents for the removal of such toxic pollutants from the waste water due to its simple synthesis, easy operation, effectiveness, and economic viability have emerged a new dimension in the wastewater treatment approaches. Various adsorbents have been prepared to examine their adsorption capacity against different adsorbates, but, to attain sustainability, biocompatibility, and biodegradation, bio-adsorbents have been found to won the battle. Seaweed derived polysaccharide; Carrageenan (CR) has been proven to be an excellent adsorbent for the wastewater treatment. It has been successfully modified with various components to form CR based-magnetic composites, hydrogels, nanoparticle modified CR composites and many others to enrich and diversify its properties. In this review, we have explained the adsorption behaviour of various carrageenan based adsorbents for the removal of different dyes. The influence of various parameters such as the effect of initial concentration, adsorbent dosage, contact time, pH, temperature, and ion concentration on dye adsorption is well explained. This paper also summarizes the structure, morphology, swelling ability, and thermal stability of carrageenan. The data also expounds on the adsorption capacity, kinetic model, isotherm model, and nature of the adsorption process. Different types of solvents are used for the regeneration and reusability of carrageenan adsorbents and their regeneration studies and desorption efficiency is well-explained. The adsorption mechanism of dyes onto carrageenan based adsorbents has been well described in this review. This review provides a deep insight about the use of carrageenan based adsorbents for the wastewater treatment.

Degradation of Azo Dyes: Bacterial Potential for Bioremediation

The use of dyes dates to ancient times and has increased due to population and industrial growth, leading to the rise of synthetic dyes. These pollutants are of great environmental impact and azo dyes deserve special attention due their widespread use and challenging degradation. Among the biological solutions developed to mitigate this issue, bacteria are highlighted for being versatile organisms, which can be applied as single organism cultures, microbial consortia, in bioreactors, acting in the detoxification of azo dyes breakage by-products and have the potential to combine biodegradation with the production of products of economic interest. These characteristics go hand in hand with the ability of various strains to act under various chemical and physical parameters, such as a wide range of pH, salinity, and temperature, with good performance under industry, and environmental, relevant conditions. This review encompasses studies with promising results related to the use of bacteria in the bioremediation of environments contaminated with azo dyes in the most diverse techniques and parameters, both in environmental and laboratory samples, also addressing their mechanisms and the legislation involving these dyes around the world, showcasing the importance of bacterial bioremediation, specialty in a scenario in an ever-increasing pursuit for sustainable production.

Synthesis of two tetra-azolium salts and the recognition performance for guests

Two tetra-azolium salts 1 and 2 were synthesized and characterized, and their selective recognition of guests (o-phenylenediamine and F−) was investigated.

Challenges and Recent Advances in Enzyme-Mediated Wastewater Remediation-A Review

Different classes of artificial pollutants, collectively called emerging pollutants, are detected in various water bodies, including lakes, rivers, and seas. Multiple studies have shown the devastating effects these emerging pollutants can have on human and aquatic life. The main reason for these emerging pollutants in the aquatic environment is their incomplete removal in the existing wastewater treatment plants (WWTPs). Several additional treatments that could potentially supplement existing WWTPs to eliminate these pollutants include a range of physicochemical and biological methods. The use of enzymes, specifically, oxidoreductases, are increasingly being studied for their ability to degrade different classes of organic compounds. These enzymes have been immobilized on different supports to promote their adoption as a cost-effective and recyclable remediation approach. Unfortunately, some of these techniques have shown a negative effect on the enzyme, including denaturation and loss of catalytic activity. This review focuses on the major challenges facing researchers working on the immobilization of peroxidases and the recent progress that has been made in this area. It focuses on four major areas: (1) stability of enzymes upon immobilization, enzyme engineering, and evolution; (2) recyclability and reusability, including immobilization on membranes and solid supports; (3) cost associated with enzyme-based remediation; and (4) scaling-up and bioreactors.

Decolourisation and Biodegradation of Textile Di-azo Dye Congo Red by Chryseobacterium geocarposphaerae DD3

In the present study, Chryseobacterium geocarposphaerae DD3 isolated from textile industry dye effluent in West Bengal, India, displayed significant tolerance to sulfonated di-azo dye Congo red (CR), up to 500 ppm. The optimum decolourisation revealed that C. geocarposphaerae DD3 was capable of 96.52% decolourisation of 0.2 g L−1 CR within 12 h of treatment in the presence of 5 g L−1 glucose as supplementary carbon source. Biodegradation analysis of decolourised CR containing water was investigated by FTIR, MS and 1H NMR, which confirmed the absence of azo bond as well as the toxic aromatic amines. Further, phytotoxicity analysis was performed to assess the toxicity of CR before and after bacterial treatment. Growth indexes of Vigna radiata L. seed confirmed that the biodegraded water was non-phytotoxic in comparison to the control CR solution. Multivariate analyses confirmed the same, showing significant differences between measured plant health indicators for CR solutions, whereas no significant differences were found between distilled and treated water. This study is novel as it is the first report of dye degradation by C. geocarposphaerae and may lead to a sustainable way of treating dye-contaminated water in the near future.

Degradation of synthetic dyes using nanoparticles: a mini-review

The industrial revolution has marked a strong impact on financial upgradation of several countries, and increase in the industrial establishment globally has direct impact on environment because of the release of unwanted product in air and inside the water bodies. The use of dyes has increased tremendously in various industries ranging from food, leather, textile, paper, cosmetic, pharmaceuticals, etc. The problem has emerged due to disposing of the dyes in the open environment, and mostly it is disposed along with the industrial wastes into the water bodies, which becomes harmful for animals, aquatic life and human health. This review highlights the role of the nanoparticles particularly biosynthesized nanoparticles for eliminating the dyes from the industrial wastewater. There are several methods for the synthesis of nanoparticle including physical, chemical and green synthesis of nanoparticles commonly known as biological method. Among all, the biological method is considered as the rapid, easy, eco-friendly and is being performed at mild conditions. The uses of nanoparticles for removal of dyes from water minimize the hazardous impact and thus considered to be the best approach as far as water quality and safety of environment is concerned.

Recent advances in the biodegradation of azo dyes

As dye demand continues to rapidly increase in the food, pharmaceutical, cosmetic, paper, textile, and leather industries, an industrialization increase is occurring. Meanwhile, the degradation and removal of azo dyes have raised broad concern regarding the hazards posed by these dyes to the ecological environment and human health. Physicochemical treatments have been applied but are hindered by high energy and economic costs, high sludge production, and chemicals handling. Comparatively, the bioremediation technique is an eco-friendly, removal-efficient, and cost-competitive method to resolve the problem. This paper provides scientific and technical information about recent advances in the biodegradation of azo dyes. It expands the biodegradation efficiency, characteristics, and mechanisms of various microorganisms containing bacteria, fungi, microalgae, and microbial consortia, which have been reported to biodegrade azo dyes. In addition, information about physicochemical factors affecting dye biodegradation has been compiled. Furthermore, this paper also sketches the recent development and characteristics of advanced bioreactors.

Subcritical and supercritical water oxidation for dye decomposition

The total annual output of synthetic dyes exceeds 7 × 10⁵ tons. About 1,000 tons of non-biodegradable synthetic dyes are released every year into the natural streams and water sources from textile wastes. The release of these colored wastewater exerts negative impact on aquatic ecology and human beings because of the poisonous and carcinogenic repercussions of dyes involved in coloration production. Therefore, with a growing interest in the environment, efficient technologies need to be developed to eliminate dyes from local and industrial wastewater. Supercritical water oxidation as a promising wastewater treatment technology has many advantages, such as a rapid reaction and pollution-free products. However, due to corrosion, salt precipitation and operational problems, supercritical water oxidation process did not gain expected industrial development. These technical difficulties can be overcome by application of non-corrosive subcritical water as a reaction medium. This work summarizes the negative impacts of dyes and role of subcritical and supercritical water and their efficiencies in dye oxidation processes.

Diversity of Synthetic Dyes from Textile Industries, Discharge Impacts and Treatment Methods

Natural dyes have been used from ancient times for multiple purposes, most importantly in the field of textile dying. The increasing demand and excessive costs of natural dye extraction engendered the discovery of synthetic dyes from petrochemical compounds. Nowadays, they are dominating the textile market, with nearly 8 × 105 tons produced per year due to their wide range of color pigments and consistent coloration. Textile industries consume huge amounts of water in the dyeing processes, making it hard to treat the enormous quantities of this hazardous wastewater. Thus, they have harmful impacts when discharged in non-treated or partially treated forms in the environment (air, soil, plants and water), causing several human diseases. In the present work we focused on synthetic dyes. We started by studying their classification which depended on the nature of the manufactured fiber (cellulose, protein and synthetic fiber dyes). Then, we mentioned the characteristics of synthetic dyes, however, we focused more on their negative impacts on the ecosystem (soil, plants, water and air) and on humans. Lastly, we discussed the applied physical, chemical and biological strategies solely or in combination for textile dye wastewater treatments. Additionally, we described the newly established nanotechnology which achieves complete discharge decontamination.

An azine-based polymer derived hierarchically porous N-doped carbon for hydrophilic dyes removal

In this study, a novel hierarchically porous N-doped carbon (HPNC) material was successfully prepared by soft-templating method. The commercial triblock copolymer of Pluronic F127 and a polyazine derived from hydrazine hydrate & glyoxal were used as soft template and precursor, respectively. The obtained materials were fully characterized and tested as a sorbent for the removal of hydrophilic dyes of Methylene blue (MB), Basic Fuchsin (BF), Eosin Y (EY) and Rhodamine B (RB) from their aqueous effluents. According to the characterization results, the synthesized material of HPNC-1000 presented thick fibrous morphology with micron size in diameter, hierarchically porous structure with surface area of 1853 m²/g, pore volume of 1.59 cm³/g and nitrogen content of 4.5 wt%. Adsorption-desorption investigation reveals that synergistic effect of hydrophobic interaction and hydrogen-bonding formation of the dye molecules with the sorbent was most pronounced in the adsorptions. The maximum adsorption capacities for MB, BF, EY and RB reached 0.83, 0.92, 1.23 and 1.83 mmol g^-1, respectively. The adsorption processes well fitted by the pseudo first-order kinetic model and the Liu's isotherm. The sorbent can be regenerated by above 90% of the initial adsorption efficiency after six regeneration cycles.

Enhanced degradation of 4-aminobenzenesulfonate by a co-culture of Afipia sp. 624S and Diaphorobacter sp. 624L

Two strains, Afipia sp. 624S and Diaphorobacter sp. 624L, were isolated from an enrichment culture with 4-aminobenzenesulfonate (4-ABS) as the only carbon source. Strain 624S utilized 4-ABS as the only source of carbon and energy and degraded 3.8 mM 4-ABS in 2 weeks, releasing a small amount of sulfate ions. On the other hand, strain 624L did not utilize 4-ABS. Additionally, a co-culture of strains 624S and 624L resulted in the enhanced degradation of 4-ABS, and no sulfite was accumulated in the degradation of 4-ABS. When incubated in 50 mM Tris-HCl buffer (pH 8.0) containing 2.2 mM sodium sulfite, strain 624S exhibited no sulfite oxidation; however, strain 624L completely oxidized the sulfite after 2 days. Furthermore, when manganase, which has the ability to oxidize sulfite, was added to the medium, the degradation rate of 4-ABS was increased in comparison with the non-addition control. These results indicate that the sulfite oxidation might stimulate the degradation of 4-ABS by strain 624S, suggesting syntrophic interaction between strains 624S and 624L based on sulfite oxidation.

Investigation into the Adsorption of Methylene Blue and Methyl Orange by UiO-66-NO2 Nanoparticles

In this work, the adsorptive removal of methylene blue and methyl orange by UiO-66-NO₂ nanoparticles was studied. The influence of pH on the adsorption capacity was assessed. The kinetics of the adsorption process were investigated and compared with pseudo-first-order, pseudo-second-order, Elovich, and intraparticle models. The kinetics of the adsorption fits moderately with the pseudo-first-order, but perfectly fits with pseudo-second-order models, and has a very good fit with the Elovich and intraparticle models. The adsorption isotherms were measured and compared with the Langmuir and Freundlich models. The adsorption capacity of methyl orange (MO) on UiO-66-NO₂ nanoparticles (142.9 mg/g) was over three times higher than that of methylene blue (MB) on the nanoparticles (41.7 mg/g). The discrepancy between these capacities was attributed to the presence of the -NO₂ functional group, which caused a strong negative mesomeric effect in the metal-organic framework structure.

Factors Determining the Removal Efficiency of Procion MX in Waters Using Titanate Nanotubes Catalyzed by UV Irradiation

The treatment of wastewater from the textile industry containing organic dyes faces many challenges since these compounds resist the biodegradation process in conventional treatment units. Among the physicochemical processes, photocatalysis is considered a facile, cheap, and environmental-friendly technology for treating persistent organic pollutants in waters at low concentrations. This study investigated several physicochemical factors determining the photocatalytic activity of titanate nanotubes (TNTs) to remove Procion MX 032 (PMX), an azo dye, in waters. Degradation of PMX by photocatalytic oxidation process at room temperature (30°C) was set up with the UV irradiation in the presence of different types of photocatalyst such as ST-01 (100% anatase), industrial TiO2, TNTs calcined at 120°C and 500°C. Effect of reaction time, catalyst amount, pH, light wavelength and intensity, and oxidants was investigated. Consequently, TNTs calcined at 500°C provided the highest removal efficiency. The photocatalytic oxidation of PMX by TNT calcined at 500°C was affected by pH variation, getting the highest removal at pH of 8, and inhibited with the presence of H2O2 and O2. Particularly, the PMX degradation using titanate nanotubes was optimized under the UV-A intensity of 100 W/m2. The dye was degraded by more than 95% at the TNTs concentration of 75 mg/L and pH 8.0 after 90 min. The results suggest that photocatalysis using TNTs can be a simple but efficient treatment method to remove PMX and potentially be applied for the treatment of wastewaters containing dyes.

Production of bioelectricity may play an important role for the survival of Xanthomonas campestris pv. campestris (Xcc) under anaerobic conditions

The plant pathogen Xanthomonas is commonly found in biocontaminated bioreactors; however, few studies have evaluated the growth and impacts of this microorganism on bioreactors. In this study, we examined the characteristics of Xanthomonas campestris pv. campestris (Xcc). Our results showed that Xcc could reduce metal Fe (III) and decolorise methyl orange in vitro. Moreover, I-t and cyclic voltammetry curves showed that Xcc could generate bioelectricity and had two extracellular electron transfer pathways, similar to that of Shewanella. Based on the spectral analysis of intact cells and scanning electron microscopy analysis, one pathway was speculated to involve cytochrome C by direct contact with the pili or cell surface. The other pathway may involve indirect mediators, such as redox substrates, among extracellular polymeric substances. For the direct extracellular electron transfer process, the charge transfer coefficient α, electron number n, and the electron transfer rate constant k_s were determined to be 0.49, 2.6, and 2.2 × 10^-3 s^-1, respectively. In the indirect extracellular electron transfer processes, the values of α, n, and k_s were 0.52, 4, and 1.21 s^-1, respectively. Of these two transfer methods, indirect electron transfer is dominant and faster than direct electron transfer. Moreover, after mutation of the dsbD gene, which is important for indirect electron transfer, the electrochemical parameters α, n, and k_s decreased. Our findings reveal a new anaerobic mechanism mediating the survival of Xcc during wastewater treatment, and may help develop new strategies for preventing Xcc growth during wastewater treatment.

Efficient and Rapid Photocatalytic Degradation of Methyl Orange Dye Using Al/ZnO Nanoparticles

ZnO and Aluminum doped ZnO nanoparticles (Al/ZnO NPs) were successfully synthesized by the sol-gel method. Together with the effect of calcination temperatures (200, 300 and 400 °C) and Al dosage (1%, 3%, 5% and 10%) on structural, morphological and optical properties of Al/ZnO NPs, their photocatalytic degradation of methyl orange (MO) dye was investigated. The calcination temperatures at 200, 300 and 400 °C in forming structure of ZnO NPs led to spherical nanoparticle, nanorod and nanoflake structures with a well-crystalline hexagonal wurtzite, respectively. The ZnO NPs calcined at 200 °C exhibited the highest specific surface area and light absorption property, leading to the MO removal efficiency of 80% after 4 h under the Ultraviolet (UV) light irradiation. The MO removal efficiency was approximately two times higher than the nanoparticles calcined at 400 °C. Furthermore, the 5% Al/ZnO NPs exhibited superior MO removal efficiency of 99% in only 40 min which was approximately 20 times enhancement in photocatalytic activity compared to pristine ZnO under the visible light irradiation. This high degradation performance was attributed to the extended light absorption, narrowed band gap and effective suppression of electron-hole recombination through an addition of Al metal.

Membrane Surface Functionalization with Imidazole Derivatives to Benefit Dye Removal and Fouling Resistance in Forward Osmosis

Water contaminated with low concentrations of pollutants is more difficult to clean up than that with high pollutant content levels. Membrane separation provides a solution for removing low pollutant content from water. However, membranes are prone to fouling, losing separation performances over time. Here we synthesized neutral (IM-NH₂) and positively charged (IL-NH₂) imidazole derivatives to chemically functionalize membranes. With distinct properties, these imidazole grafts could tailor membrane physicochemical properties and structures to benefit forward osmosis (FO) processes for the removal of 20-100 ppm of Safranin O dye-a common dye employed in the textile industry. The water fluxes produced by IM-NH₂- and IL-NH₂-modified membranes increased by 67% and 122%, respectively, with DI water as the feed compared to that with the nascent membrane. A 39% flux increment with complete dye retention (∼100%) was achieved for the IL-NH₂-modified membrane against 100 ppm of Safranin O dye. Regardless of the dye concentration, the IL-NH₂-modified membrane exhibited steadily higher permeation performance than the original membrane in long-term experiments. Reproducible experimental results were obtained with the IL-NH₂-modified membrane after cleaning with DI water, demonstrating the good antifouling properties and renewability of the newly developed membrane.

Acute toxicity of textile dye Methylene blue on growth and metabolism of selected freshwater microalgae

Microalgae are ecologically important species in aquatic ecosystems due to their role as primary producers. The inhibition of growth of microalgae due to dye pollution results in an upheaval in the trophic transfer of nutrients and energy in aquatic ecosystems. Therefore, this investigation aimed to evaluate the toxicity of a textile dye Methylene blue (MB) on two microalgae viz. Chlorella vulgaris and Spirulina platensis. An exposure of the unialgal populations of both the microalgae towards graded concentrations of the dye showed a concentration-dependent decrease in specific growth rate, pigment and protein content. In the toxicity study of 24 -96-h, following the OECD guidelines 201, the EC₅₀ values of C. vulgaris and S. platensis ranged from 61.81 to 5.43 mg/L and 5.83 to 1.08 mg/L respectively revealing that S. platensis exhibited a higher level of susceptibility towards the dye as compared to C. vulgaris and the latter is more tolerant to the dye toxicity even at higher concentrations. The findings indicate that the response to dye is a species-specific phenomenon. Given the differences in the cell structure and enzymatic pathways in Spirulina platensis (a prokaryote) and Chlorella vulgaris (an eukaryote), the tolerance levels can differ. After 96-h exposure of C. vulgaris to MB (100 mg/L), the chlorophyll-a, b and carotenoid content were reduced 2.5, 5.96 and 3.57 times in comparison to control whereas in S. platensis exposure to MB (10 mg/L), the chlorophyll-a and carotenoid content were reduced 3.59 and 5.08 times in comparison to control. After 96-h exposure of C. vulgaris and S. platensis to the dye (20 mg/L), the protein content was found to be 4.34 and 2.75 times lower than the control. The protein content has decreased in accordance with the increase in dye concentration.

A spot test for direct quantification of acid green 16 adsorbed on a molecularly imprinted polymer through diffuse reflectance measurements

This work describes a novel technique for the direct quantification of Acid Green 16 (AG16) adsorbed on a molecularly imprinted polymer (MIP) through the application of diffuse reflectance spectrophotometry (DRS) directly in a solid material. The MIP was synthesized by a bulk method using 1-vinylimidazole as the functional monomer. To conduct DRS analysis, adsorption assays were performed through the application of the MIP in a solution containing different concentrations of AG16 for 120 minutes; subsequently, the MIP was left to dry and a certain quantity of the polymer was analyzed. Under optimized conditions, a linear concentration range of 1.0 μmol L^-1 to 10.0 μmol L^-1 and limits of detection and quantification of 0.3 μmol L^-1 and 1.0 μmol L^-1, respectively, were obtained. The repeatability and reproducibility of the method were evaluated and RSD values lower than 4% were obtained. Selectivity studies allowed finding imprinting factor values of 1.9, 2.6, 1.1, and 1.1 for AG16, Direct yellow 50, Acid Blue 1, and Brilliant Green, respectively. The proposed method was applied toward the analysis of river water and textile industry effluents. The advantage and novelty of the technique lie in the fact that the amount of the analyte adsorbed on the selective polymer is directly measured on the solid material for AG16 and not indirectly via the remaining solution as it has always been carried out in previous studies reported in the literature. The findings show that the proposed technique is relatively simple, novel and highly versatile for the quantification of analytes adsorbed on MIPs, as well as for the analysis of the material of interest and quantification of diverse analytes in different matrices.

A comprehensive review on the integration of advanced oxidation processes with biodegradation for the treatment of textile wastewater containing azo dyes

The threat of dye contamination has achieved an unsurpassed abnormal state lately due to their massive consumption in several enterprises including textile, leather, cosmetic, plastic, and paper industries. This review focuses on the integrations of various advanced oxidation processes (AOPs), such as Fenton, photocatalysis, and ozonation, with biodegradation for the treatment of textile azo dyes. Such integrations have been explored lately by researchers to bring down the processing cost and improve the degree of mineralization of the treated dyeing wastewater. The review refers to the basic mechanisms, the influence of various process parameters, outcomes of recent works, and future research directions. All the three AOPs, independently, demonstrated substantial color reduction of 54–100%. The ozonation process, stand-alone, showed the most efficient decolorization (of 88–100%) consistently in all reviewed research works. In contrast, all three AOPs independently offered varied and inadequate COD reduction in the range of 16–80%. The AOPs, after getting integrated with biodegradation, yielded an additional reduction (of 11–70%) in the COD-levels and (of 16–80%) in the TOC-levels. Further, the integration of AOPs with biodegradation has potential to significantly reduce the treatment costs. The review suggests further research efforts in the direction of sequencing chemical and biological routes such that their synergistic utilization yield complete detoxification of the textile azo dyes economically at large-scale.

Self-Assembled Biomimetic Capsules for Self-Preservation

The inorganic semiconductor is an attractive material in sewage disposal and solar power generation. The main challenges associated with environment-sensitive semiconductors are structural degradation and deactivation caused by the unfavorable environment. Here, inspired by the pomegranate, a self-protection strategy based on the self-assembly of silver chloride (AgCl) particles is reported. The distributed photosensitive AgCl particles can be encapsulated by themselves through mixing aqueous silver nitrate and protic ionic liquids (PILs). A probable assembling mechanism is proposed based on the electrostatic potential investigation of PILs cations. The AgCl particles inside the shell maintain their morphology and structure well after 6 months light-treatment. Moreover, they exhibit excellent photocatalytic activity, same as newly prepared AgCl particles, for degradation of methyl orange (MO), neutral red (NR), bromocresol green (BG), rhodamine B (RhB), Congo red (CR), and crystal violet (CV).

Oerskovia paurometabola can efficiently decolorize azo dye Acid Red 14 and remove its recalcitrant metabolite

The biodegradation of dyes remains one of the biggest challenges of textile wastewater. Azo dyes are one of the most commonly employed dye classes, and biological treatment processes tend to generate recalcitrant aromatic amines, which are more toxic than the parent dye molecule. This study aimed to isolate bacterial strains with the capacity to degrade both the azo dye and the resulting aromatic amines towards the development of a simple and reliable treatment approach for dye-laden wastewaters. A mixed bacterial enrichment was first developed in an anaerobic-aerobic lab-scale sequencing batch reactor (SBR) fed with a synthetic textile wastewater containing the model textile azo dye Acid Red 14 (AR14). Eighteen bacterial strains were isolated from the SBR, including members of the Acinetobacter, Pseudomonas and Oerskovia genera, Oerskovia paurometabola presenting the highest decolorization capacity (91% after 24 h in static anaerobic culture). Growth assays supported that this is a facultative bacterium, and decolorization batch tests with 20-100 mg AR14 L^-1 in a synthetic textile wastewater supplemented with yeast extract indicated that O. paurometabola has a high color removal capacity for a significant range of AR14 concentrations. In addition, a model typically used to describe biodegradation of xenobiotic compounds was adjusted to the results, to predict AR14 biodegradation time profiles at different initial concentrations. HPLC analysis confirmed that decolorization occurred through azo bond reduction under anaerobic conditions, the azo dye being completely reduced after 24 h of anaerobic incubation for the range of concentrations tested. Interestingly, partial (up to 63%) removal of one of the resulting aromatic amines (4-amino-naphthalene-1-sulfonic acid) was observed when subsequently subjected to aerobic conditions. Overall, this work showed the azo dye biodegradation potential of specific bacterial strains isolated from mixed culture bioreactors, reporting for the first time the decolorization capacity of an Oerskovia sp. with further biodegradation of a recalcitrant sulfonated aromatic amine metabolite.

Biotransformation and toxicity effect of monoanthraquinone dyes during Bjerkandera adusta CCBAS 930 cultures

The aim of this study was to evaluate of possibility of biotransformation and toxicity effect of monoanthraquinone dyes in cultures of Bjerkandera adusta CCBAS 930. Phenolic compounds, free radicals, phytotoxicity (Lepidium sativum L.), ecotoxicity (Vibrio fischeri) and cytotoxicity effect were evaluated to determine the toxicity of anthraquinone dyes before and after the treatment with B. adusta CCBAS 930. More than 80% of ABBB and AB129 was removed by biodegradation (decolorization) and biosorption, but biodegradation using oxidoreductases was the main dye removing mechanism. Secondary products toxic to plants and bacteria were formed in B. adusta strain CCBAS 930 cultures, despite efficient decolorization. ABBB and AB129 metabolites increased reactive oxygen species (ROS) production in human fibroblasts, but did not increase LDH release, did not affect the resazurine reduction assay and did not change caspase-9 or caspase-3 activity.

Metallic Active Sites on MoO2(110) Surface to Catalyze Advanced Oxidation Processes for Efficient Pollutant Removal

Advanced oxidation processes (AOPs) based on sulfate radicals (SO₄^⋅−) suffer from low conversion rate of Fe(III) to Fe(II) and produce a large amount of iron sludge as waste. Herein, we show that by using MoO₂ as a cocatalyst, the rate of Fe(III)/Fe(II) cycling in PMS system accelerated significantly, with a reaction rate constant 50 times that of PMS/Fe(II) system. Our results showed outstanding removal efficiency (96%) of L-RhB in 10 min with extremely low concentration of Fe(II) (0.036 mM), outperforming most reported SO₄^⋅−-based AOPs systems. Surface chemical analysis combined with density functional theory (DFT) calculation demonstrated that both Fe(III)/Fe(II) cycling and PMS activation occurred on the (110) crystal plane of MoO₂, whereas the exposed active sites of Mo(IV) on MoO₂ surface were responsible for accelerating PMS activation. Considering its performance, and non-toxicity, using MoO₂ as a cocatalyst is a promising technique for large-scale practical environmental remediation.

•

The degradation rate of PMS/Fe(II)/MoO₂ system is 50 times higher than that without MoO₂

•

Fe(III)/Fe(II) cycle on (110) surface of MoO₂ in PMS/Fe(II)/MoO₂ system was confirmed

•

The metal active sites exposed to MoO₂ (110) surface are responsible for PMS activation

•

Compared with MoS₂, MoO₂ co-catalytic system has less toxicity and no release of H₂S

The Shewanella genus: ubiquitous organisms sustaining and preserving aquatic ecosystems

The Gram-negative Shewanella bacterial genus currently includes about 70 species of mostly aquatic γ­-proteobacteria, which were isolated around the globe in a multitude of environments such as surface freshwater and the deepest marine trenches. Their survival in such a wide range of ecological niches is due to their impressive physiological and respiratory versatility. Some strains are among the organisms with the highest number of respiratory systems, depending on a complex and rich metabolic network. Implicated in the recycling of organic and inorganic matter, they are important components of organism-rich oxic/anoxic interfaces, but they also belong to the microflora of a broad group of eukaryotes from metazoans to green algae. Examples of long-term biological interactions like mutualism or pathogeny have been described, although molecular determinants of such symbioses are still poorly understood. Some of these bacteria are key organisms for various biotechnological applications, especially the bioremediation of hydrocarbons and metallic pollutants. The natural ability of these prokaryotes to thrive and detoxify deleterious compounds explains their use in wastewater treatment, their use in energy generation by microbial fuel cells and their importance for resilience of aquatic ecosystems.

Green polymeric nanomaterials for the photocatalytic degradation of dyes: a review

Pure and drinkable water will be rarer and more expensive as the result of pollution induced by industrialisation, urbanisation and population growth. Among the numerous sources of water pollution, the textile industry has become a major issue because effluents containing dyes are often released in natural water bodies. For instance, about two years are needed to biodegrade dye-derived, carcinogenic aromatic amines, in sediments. Classical remediation methods based upon physicochemical reactions are costly and still generate sludges that contain amine residues. Nonetheless, recent research shows that nanomaterials containing biopolymers are promising to degrade organic pollutants by photocatalysis. Here, we review the synthesis and applications of biopolymeric nanomaterials for photocatalytic degradation of azo dyes. We focus on conducting biopolymers incorporating metal, metal oxide, metal/metal oxide and metal sulphide for improved biodegradation. Biopolymers can be obtained from microorganisms, plants and animals. Unlike fossil-fuel-derived polymers, biopolymers are carbon neutral and thus sustainable in the context of global warming. Biopolymers are often biodegradable and biocompatible.