Immobilization of Cd in river sediments by sodium alginate modified nanoscale zero-valent iron: Impact on enzyme activities and microbial community diversity

Two decades of research trends in microbial-induced carbonate precipitation for heavy metal removal: a bibliometric review and literature review

Amidst the increasing significance of innovative solutions for bioremediation of heavy metal removal, this paper offers a thorough bibliometric analysis of microbial-induced carbonate precipitation (MICP) for heavy metal removal, as a promising technology to tackle this urgent environmental issue. This study focused on articles published from 1999 to 2022 in the Scopus database. It assesses trends, participation, and key players within the MICP for heavy metal sequestration. Among the 930 identified articles, 74 countries participated in the field, with China being the most productive. Varenyam Achal, the Chinese Academy of Sciences, and Chemosphere are leaders in the research landscape. Using VOSviewer and R-Studio, keyword hotspots like "MICP", "urease", and "heavy metals" underscore the interdisciplinary nature of MICP research and its focus on addressing a wide array of environmental and soil-related challenges. VOSviewer emphasises essential terms like "calcium carbonate crystal", while R-Studio highlights ongoing themes such as "soil" and "organic" aspects. These analyses further showcase the interdisciplinary nature of MICP research, addressing a wide range of environmental challenges and indicating evolving trends in the field. This review also discusses the literature concerning the potential of MICP to immobilise contaminants, the evolution of the research outcome in the last two decades, MICP treatment techniques for heavy metal removal, and critical challenges when scaling from laboratory to field. Readers will find this analysis beneficial in gaining valuable insights into the evolving field and providing a solid foundation for future research and practical implementation.

How does the biochar-supported sulfidized nanoscale zero-valent iron affect the soil environment and microorganisms while remediating cadmium contaminated paddy soil?

In previous studies, iron-based nanomaterials, especially biochar (BC)-supported sulfidized nanoscale zero-valent iron (S-nZVI/BC), have been widely used for the remediation of soil contaminants. However, its potential risks to the soil ecological environment are still unknown. This study aims to explore the effects of 3% added S-nZVI/BC on soil environment and microorganisms during the remediation of Cd contaminated yellow-brown soil of paddy field. The results showed that after 49 d of incubation, S-nZVI/BC significantly reduced physiologically based extraction test (PBET) extractable Cd concentration (P < 0.05), and increased the immobilization efficiency of Cd by 16.51% and 17.43% compared with S-nZVI and nZVI/BC alone, respectively. Meanwhile, the application of S-nZVI/BC significantly increased soil urease and sucrase activities by 0.153 and 0.446 times, respectively (P < 0.05), improving the soil environmental quality and promoting the soil nitrogen cycle and carbon cycle. The results from the analysis of the 16S rRNA genes indicated that S-nZVI/BC treatment had a minimal effect on the bacterial community and did not appreciably alter the species of the original dominant bacterial phylum. Importantly, compared to other iron-based nanomaterials, incorporating S-nZVI/BC significantly increased the soil organic carbon (OC) content and decreased the excessive release of iron (P < 0.05). This study also found a significant negative correlation between OC content and Fe(II) content (P < 0.05). It might originate from the reducing effect of Fe-reducing bacteria, which consumed OC to promote the reduction of Fe(III). Accompanying this process, the redistribution of Cd and Fe mineral phases in the soil as well as the generation of secondary Fe(II) minerals facilitated Cd immobilization. Overall, S-nZVI/BC could effectively reduce the bioavailability of Cd, increase soil nutrients and enzyme activities, with less toxic impacts on the soil microorganisms.

UHPM dominance in driving the formation of petroleum-contaminated soil aggregate, the bacterial communities succession, and phytoremediation

This study focused on the effects of urea humate-based porous materials (UHPM) on soil aggregates, plant physiological characteristics, and microbial diversity to explore the effects of UHPM on the phytoremediation of petroleum-contaminated soil. The compositions of soil aggregates, ryegrass (Lolium perenne) biomass, plant petroleum enrichment capacity, and bacterial communities in soils with and without UHPM were investigated. The results showed that UHPM significantly increased soil aggregate content by 0.25 mm-5 mm, resulting in higher fertilizer holding capacity, erosion resistance capacity, and plant biomass and microbial number than the soil without UHPM mixed. In addition, UHPM decreased the absorption of petroleum by plants in the soil while increasing the abundance of degrading bacteria and petroleum-degrading-related genes in the soil, thereby promoting the removal of hard-to-degrade petroleum components. RDA showed that, compared with the unimproved soil, each soil indicator was positively correlated with a high abundance of degrading bacteria in the improved soil and was significant. UHPM can be regarded as a petroleum-contaminated soil remediation agent that combines slow nutrient release with soil improvement effects.

Zeolite facilitates sequestration of heavy metals via lagged Fe(II) oxidation during sediment aeration

Aeration of sediments could induce the release of endogenous heavy metals (HMs) into overlying water. In this study, experiments involving FeS oxygenation and contaminated sediment aeration were conducted to explore the sequestering role of zeolite in the released HMs during sediment aeration. The results reveal that the dynamic processes of Fe(II) oxidation play a crucial role in regulating HMs migration during both FeS oxygenation and sediment aeration in the absence of zeolite. Based on the release of HMs, Fe(II) oxidation can be delineated into two stages: stage I, where HMs (Mn2+, Zn2+, Cd2+, Ni2+, Cu2+) are released from minerals or sediments into suspension, and stage II, released HMs are partially re-sequestered back to mineral phases or sediments due to the generation of Fe-(oxyhydr) oxide. In contrast, the addition of zeolite inhibits the increase of HMs concentration in suspension during stage I. Subsequently, the redistribution of HMs between zeolite and the newly formed Fe-(oxyhydr) oxide occurs during stage II. This redistribution of HMs generates new sorption sites in zeolite, making them available for resorbing a new load of HMs. The outcomes of this study provide potential solutions for sequestering HMs during the sediment aeration.

Microbial Remediation of Crude Oil in Saline Conditions by Oil-Degrading Bacterium Priestia megaterium FDU301

Salinity greatly affects the microbial degradation process of crude oil; thus, the isolation and identification of halotolerant microbes is essential. Limited studies explored how microbes respond to increased salinity. In this study, an oil-degrading bacterium Priestia megaterium FDU301 was isolated from the Dagang oil field, which can tolerate a salinity of 6%. Compared to the non-saline condition, oil degradation ratios by P. megaterium FDU301 increased by 15.27% and 11.26% in 0.5% and 3.5% salinity media, respectively. Meanwhile, bacteria degraded various components of crude oil more thoroughly in saline environments, especially mid-chain hydrocarbons (C11-C18). Surface tension under salt stress was lower than that in the non-saline medium, indicating that the amount of biosurfactants produced by bacteria was increased. The microbial activity enhanced markedly in response to increased salinity, which was the main factor for the high degradation ability. As a vital component of biofilms, the production of polysaccharides was accelerated with P. megaterium FDU301 inoculation in saline environments. These results indicate that P. megaterium FDU301 has great potential application in oil bioremediation in saline environments.

Fe-CGS Effectively Inhibits the Dynamic Migration and Transformation of Cadmium and Arsenic in Soil

The iron-modified coal gasification slag (Fe-CGS) material has excellent performance in purifying heavy-metal-contaminated water due to its good surface properties and adsorption capacities. However, it is unclear whether it can provide long-term simultaneous stabilization of Cd and As in composite-contaminated soils in extreme environments. This study investigated the long-term stabilization of Cd and As in acidic (JLG) and alkaline (QD) soils by simulating prolonged heavy rainfall with the addition of Fe-CGS. Multiple extraction methods were used to analyze the immobilization mechanisms of Cd and As in soil and their effects on bioavailability. The results indicate that the stabilization efficiency was related to the dosage of Fe-CGS. The concentrations of Cd and As in the JLG soil leachate were reduced by 77.6% (2.0 wt%) and 87.8% (1.0 wt%), respectively. Additionally, the availability of Cd and As decreased by 46.7% (2.0 wt%) and 53.0% (1.0 wt%), respectively. In the QD soil leachate, the concentration of Cd did not significantly change, while the concentration of As decreased by 92.3% (2.0 wt%). Furthermore, the availability of Cd and As decreased by 22.1% (2.0 wt%) and 40.2% (1.0 wt%), respectively. Continuous extraction revealed that Fe-CGS facilitated the conversion of unstable, acid-soluble Cd into oxidizable Cd and acid-soluble Cd. Additionally, it promoted the transformation of both non-specifically and specifically adsorbed As into amorphous iron oxide-bound and residual As. Fe-CGS effectively improved the soil pH, reduced the bioavailability of Cd and As, and blocked the migration of Cd and As under extreme rainfall leaching conditions. It also promoted the transformation of Cd and As into more stable forms, exhibiting satisfactory long-term stabilization performance for Cd and As.

Cd immobilization efficacy of biogenic Mn oxide formed by Cladosporium sp. XM01 and its biological response in sediment

Biogenic Mn oxides (BMOs), the main component of natural Mn oxides, closely relate to Cd in sediment. However, the immobilization behavior of Cd in sediments by BMOs is currently unclear. This study explores the role of BMO produced by the Mn-oxidizing fungus Cladosporium sp. XM01 in mediating the Cd immobilization and its biological response in sediment. A comparison is made with those of a chemical Mn oxide (CMO, triclinic birnessite). After 45 d of remediation, the results showed that the application of BMO reduced the extractable Cd by 32.20-64.40% based on the TCLP (toxicity characteristic leaching procedure) and by 26.16-51.43% based on the PBET (physiologically based extraction test). Additionally, BMO was more effective at immobilizing Cd than CMO in sediments. The BCR (Community Bureau of Reference) extraction results suggested that BMO converted some acid-soluble components (20.63-33.23%) of Cd into residual components (9.40-20.68%). Moreover, the urease and catalase activity gradually increased within the first 25 days and then stabilized after applying BMO. Microbial community analysis revealed that the addition of a high-dose BMO was more conducive to increasing microbial abundance and biodiversity. This study verifies that BMO is a low-cost, high-efficiency, and eco-friendly material for immobilizing Cd in sediment.

Preparation of landscape gardening soil using undersized fraction from aged MSW by EDTA or citric acid coupled with humic acid: Effect assessment, properties, and optimization

Undersized fraction from aged municipal solid waste (UFAMSW), as a kind of soil-like material, has been proved effective in providing a large amount of organic matter and nutrients for soil and plants. The characteristics and effectiveness of heavy metal pollution removal in UFAMSW attracted tremendous research interest from scientists recently. In this study, the heavy metal removal efficiencies and bioavailability of washing on contaminated UFAMSW were evaluated with three washing reagents including ethylene diamine tetra acetic acid (EDTA), citric acid (CA), and humic acid (HA). The effects of chelating agent concentration, pH, and washing time on metal removal were investigated and response surface methodology (RSM) was employed to optimize the washing conditions. The results indicated that the removal efficiencies of Cu, Zn, and Mn could be 53.68%, 52.12%, and 30.63% by EDTA/HA washing and 42.36%, 39.67% and 28.49% by CA/HA washing, respectively. The European Community Bureau of Reference (BCR) sequential extraction was applied to analyze the fraction change of heavy metals in UFAMSW before and after washing, and it was found that chelating agent combined with HA could contribute to the removal of the exchangeable fraction. Physical and chemical properties of UFAMSW were improved to some extent after washing with mixed HA and chelating agent and could achieve the quality standard of landscape gardening soil. Accordingly, the mixture of HA and other chelating agents could be a promising washing process for preparation of landscape gardening soil using UFAMSW.Implications: Our manuscript studies the removal of heavy metals from the contaminated undersized fraction from aged municipal solid waste (UFAMSW). UFAMSW, as a kind of soil-like material, has been proved effective in providing a large amount of organic matter and nutrients for soil and plants however often limited by heavy metal pollution. The UFAMSW used in this experiment was collected after the excavation and screening-sorting of aged refuse from Changshankou Domestic Waste Sanitary Landfill in Wuhan City, Hubei Province, Southern China. This study investigated the effects of EDTA, CA, HA, mixed EDTA/HA, and mixed CA/HA washing on heavy metal removal (Cu, Zn, and Mn), bioavailability of residual heavy metal and properties. The effects of chelating agent concentration, pH, and washing time on metal removal were investigated and then response surface methodology was employed to optimize the washing conditions. The results showed that washing by CA/HA and EDTA/HA, had a higher removal efficiency of heavy metals (Cu, Zn, and Mn) in UFAMSW compared to single HA. Meanwhile, HA has a higher removal for exchangeable fraction of heavy metals, the exchangeable concentration of Cu, Zn, and Mn in CA/HA and EDTA/HA washed UFAMSW were lower compared with UFAMSW washed by single CA and EDTA. Thus, mixing HA with EDTA or CA makes a less risk to environmental and the removal efficiency is acceptable. Additionally, CA/HA and EDTA/HA washing tend to improve soil physicochemical properties and soil fertility. Thus, mixing HA with different washing agent are potential methods for preparation of landscape gardening soil using UFAMSW.

Application and development of zero-valent iron (ZVI)-based materials for environmental remediation: A scientometric and visualization analysis

Zero-valent iron (ZVI)-based materials are among the most widely used engineered particles in the field of environmental remediation. To provide a comprehensive overview of the status and trend of the research on them, this study conducted a quantitative and visual analysis of 6296 relevant publications obtained from Web of Science between 1994 and 2022 using CiteSpace software. By using the bibliometric method, this work systematically analyzed the knowledge structure, research hotspots and trends of ZVI-based materials in this field. The results show that the research on ZVI-based materials in this field developed rapidly over the past 28 years. China is the greatest contributor with the most published articles and collaborations. Still, the USA has the most academic influence with the highest average citations per article. Chinese Academy of Sciences and Tongji University are the primary establishments that produced the greatest number of publications and had the highest h-index. Keyword cluster analysis indicates that the primary research topics are related to reductive dechlorination, sulfate radical, arsenic removal, graphene oxide, porous media, peroxymonosulfate, groundwater remediation, and permeable reactive barrier. Meanwhile, keyword burst analysis reveals that the primary research hotspots and frontiers of ZVI focus on its modification, the refractory and emerging contaminants treatment, persulfate activation, and electron transfer. However, no keywords or topics related to the environmental impact and toxicity of ZVI-based materials are available in the keyword clustering and burst analysis results, indicating this direction deserves more attention in future research. Through a comprehensive and in-depth bibliometric analysis, this paper provides new insight into the research hotspots and development trends of the research on ZVI-based materials in environmental remediation.

Sodium carbonate/biochar-supported sodium alginate-modified nano zero-valent iron for complete adsorption and degradation of tetracycline in aqueous solution

The aggregation of nanoscale zero-valent iron (NZVI) is one of the biggest challenges for its application when treating contaminants in aquatic environment. We report a study on synthesis of sodium carbonate-modified biochar (BC-600) combined with sodium alginate (SA)-modified NZVI (SA/NZVI@BC-600) for the removal of tetracycline (TC). When the initial concentration of TC was 20 mg/L, 100% TC was removed by SA/NZVI@BC-600 at an initial pH of 7 under room temperature of 25 °C within 90 min. In addition, the reactivity of the SA/NZVI@BC-600 composites toward TC removal was not obviously declined after 4 cycles. SA/NZVI@BC-600 shows high reactivity, stability, and reusability. This excellent performance of SA/NZVI@BC-600 was related to the addition of SA and BC-600. The best performance of the SA/NZVI@BC-600 system was observed under weakly acidic and neutral conditions. Increasing the initial concentration and lowering the reaction temperature had a slight negative effect on the removal of TC by SA/NZVI@BC-600. In addition, the presence of CO32- and HCO3- had a significant negative effect on the degradation of TC. Meanwhile, ·OH and ·O2- played the leading role in TC degradation. This study not only reported a novel strategy of synthesizing an excellent BC modified NZVI based catalyst but also evaluated its promising application for antibiotic degradation in aqueous solution.

Stabilization of Ni by rhamnolipid modified nano zero-valent iron in soil: Effect of simulated acid rain and microbial response

Nickel (Ni), as one of the essential micronutrients, exists widely in nature, but high concentration of Ni in soil can pose certain biological toxicity. Nano zero-valent iron (nZVI) and rhamnolipid modified nZVI (RL@nZVI) can effectively stabilize Ni in soil. In this study, the stabilization effect of nZVI and RL@nZVI on the Ni-polluted soil under simulated acid rain and the microbial community response during the soil remediation under different Ni levels (200, 600, and 1800 mg/kg) were investigated. The results show that the addition of nZVI and RL@nZVI increased the pH of leachate to neutral and decreased the amount of Ni in leachate (23.33%-47.06% by nZVI and 50.01%-70.47% by RL@nZVI), indicating that nZVI and RL@nZVI could reduce the potential radial migration risk of Ni in soil under simulated acid rain. The addition of RL@nZVI was beneficial to recover the soil bacterial community diversity, which was inhibited by Ni pollution, and rhamnolipid coating could reduce the toxicity of nZVI. The dominant bacteria in RL@nZVI-treated soil with low, medium, and high Ni pollution were Firmicutes, Proteobacteria and Actinobacteria, respectively. Soil potential, total organic carbon, and pH were the main driving factors affecting the bacterial community structure, while Ni stress only caused changes in the relative abundance of some tolerant bacteria.

Immobilization of cadmium in river sediments by different modified nanoscale zero-valent iron: performance, mechanisms, and Fe dissolution

Modified nanoscale zero-valent iron (NZVI) exhibited great potential for the remediation of heavy metal contaminated river sediments, but its mechanisms and environmental risks are still unclear. This study systematically discussed the performance and the mechanisms of modified NZVI materials, i.e., sodium alginate-coated NZVI (SNZVI), rhamnolipid-coated NZVI (RNZVI), and graphene oxide-loaded NZVI (GNZVI), for the stabilization of Cd in sediment, with the exploration of their stability to Cd at various pH values and Fe dissolution rate. Compared with the control, the toxicity characteristic leaching procedure (TCLP) leachable Cd decreased by 52.66-96.28%, and the physiologically based extraction test (PBET) extractable Cd decreased by 44.68-70.21% after 56 days of incubation with the immobilization efficiency varying according to GNZVI > RNZVI > SNZVI > NZVI. Besides, the adsorption behavior of Cd on materials was fitted with the Freundlich model and classified as an endothermic, spontaneous, and chemical adsorption process. SEM-EDX, XRD, and FTIR results verified that the stabilization mechanisms of Cd were principally based on the adsorption, complexation of Cd2+ with secondary Fe minerals (including Fe2O3, γ-Fe2O3, and γ-FeOOH) and precipitation (Cd(OH)2). From the risk assessment results, it was observed that the materials were favorable for Cd stabilization at a pH range from 7 to 11, meanwhile, the leaching concentration of Fe in the overlying water was detected below the limit value. These findings pave the way to developing an effective strategy to remediate Cd contaminated river sediments.

Unveiling the impact and mechanisms of Cd-driven ecological assembly and coexistence of bacterial communities in coastal sediments of Yellow Sea

The microbial community assembly processes and underlying mechanisms in response to heavy metal accumulation in coastal sediments remain underexplored. In this study, the heavy metal concentration in samples were found below the marine sediment quality standards. Through partial Mantel tests and linear regression analysis, Cd was identified as the major influencing factor, displaying strongest correlation with the bacterial community in the sediments. The class Desulfuromonadia was identified as a biomarker which showed enrichment in the sediments with high Cd content. Additionally, the results of null model and the neutral community model demonstrated the prominent role of stochastic processes in the assembly of bacterial community. However, with the increase in Cd concentration, the influence of selection processes intensified, resulting in a decline in species migration rate and subsequent reduction in ecological niche width. Furthermore, the intensified competition and an increase in keystone species among bacterial populations further enhanced the stability of the microbial co-occurrence network in response to high Cd concentration. This study offers an insight into the effects of heavy metal on microbial assembly and coexistence, which are conducive to marine ecosystem management and conservation.

Recent advances in sulfidized nanoscale zero-valent iron materials for environmental remediation and challenges

Over the past decade, sulfidized nanoscale zero-valent iron (S-nZVI) has been developed as a promising tool for the remediation of contaminated soil, sediment, and water. Although most studies have focused on applying S-nZVI for clean-up purposes, there is still a lack of systematic summary and discussion from its synthesis, application, to toxicity assessment. This review firstly summarized and compared the properties of S-nZVI synthesized from one-step and two-step synthesis methods, and the modification protocols for obtaining better stability and reactivity. In the context of environmental remediation, this review outlined an update on the latest development of S-nZVI for removal of heavy metals, organic pollutants, antibiotic resistance genes (ARGs), and antibiotic resistant bacteria (ARB) and also discussed the underlying removal mechanisms. Environmental factors affecting the remediation performance of S-nZVI (e.g., humic acid, coexisting ions, S/Fe molar ratio, pH, and oxygen condition) were highlighted. Besides, the application potential of S-nZVI in advanced oxidation processes (AOP), especially in activating persulfate, was also evaluated. The toxicity impacts of S-nZVI on the environmental microorganism were described. Finally, the future challenges and remaining restrains to be resolved for better applicability of S-nZVI are also proposed. This review could provide guidance for the environmental remediation with S-nZVI-based technology from theoretical basis and practical perspectives.

Biochar Derived from Post-Adsorbent for Immobilizing Cu and Cd in Sediment: The Effect on Heavy Metal Species and the Microbial Community Composition

Many biomass wastes or their modified forms have been investigated as heavy metal adsorbents. However, less emphasis has been placed on post-adsorbent management or possible further utilization. In this study, biochar (BC) derived from modified bamboo adsorbent after the adsorption of Cu from an aqueous solution was used for the in situ remediation of lake sediment contaminated with Cd and Cu. The results indicated that the Cu concentration was extremely low (≤0.015 mg/L), while Cd was not detected in the overlying water or the interstitial water after the 90-day BC treatment. The pH value (7.5-8.1) slightly increased, and the toxicity characteristic leaching procedure (TCLP) leachability of the Cu and Cd in the sediment decreased overall. Cu and Cd were preferentially transformed into more stable species. The findings highlighted the potential possibility of BC derived from post-adsorbent being used for sediment remediation. However, the BC addition produced significant effects on the sediment microbial activity and community structure. In general, with an increase in BC, the urease activity increased, while the alkaline phosphatase and invertase activity decreased, which could be attributed to the BC itself. In addition, significant changes in both bacterial and fungal genera were observed. Hence, a cautious approach should be taken in the practical application of BC.

Risk assessment and binding mechanisms of potentially toxic metals in sediments from different water levels in a coastal wetland

The excessive accumulation of potentially toxic metals (Pb and Cd) in coastal wetlands is among the main factors threatening wetland ecosystems. However, the effects of water table depth (WTD) on the risk and binding mechanisms of potentially toxic metals in sediments remain unclear. Here, sediments from different WTD obtained from a typical coastal wetland were evaluated using a newly developed strategy based on chemical extraction methods coupled with high-resolution spectroscopy. Our findings indicated that the WTD of the coastal wetland fluctuates frequently and the average enrichment factor for Pb was categorized as minor, whereas Cd enrichment was categorized as moderate. High-resolution spectroscopy techniques also demonstrated that organic functional groups and partly inorganic compounds (e.g., Fe-O/Si-O) played a vital role in the binding of Pb and Cd to surface sediments. Additionally, mineral components rather than organic groups were mainly bound to these metals in the bottom sediments. Collectively, our findings provide key insights into the potential health effects and binding characteristics of potentially toxic metals in sediments, as well as their dynamic behavior under varying sediment depths at a microscale.

Attapulgite amendment favors the utilization of high cadmium-contaminated soil for Erigeron breviscapus cultivation

A practical measure of soil pollution can effectively control the utilization of contaminated soil during the remediation process. In this study, Erigeron breviscapus was used as the experimental material. Soil polluted with high concentrations of cadmium (Cd) was used to study the effects of different doses of attapulgite (AP) (0, 10, 20, and 40 kg^-1 for AP0, AP10, AP20, and AP40, respectively) on the yield and quality of E. breviscapus (as measured by scutellarin), as well as soil remediation. The results showed that the yield and scutellarin content of E. breviscapus decreased by 33.4% and 78.9%, respectively, in soil contaminated with high concentrations of Cd (AP0) compared with the control soil (without Cd added). Moreover, the yield increased by 48.0% and 10.6% in AP20 and AP40, respectively, compared with AP0, and the scutellarin content increased by a factor of 2.35-2.41 in AP10, AP20, and AP40. Compared with AP0, the soil Cd content decreased by 22.5-26.2% in AP10, AP20, and AP40 and the available Cd content and acid-extractable Cd fraction in the soil also decreased. The catalase, peroxidase, superoxide dismutase activities, chlorophyll, and Fe²⁺ content were increased in AP10, AP20, and AP40, leading to an increased yield and scutellarin content. Overall, AP20 had the best effect on the yield, quality of E. breviscapus, and soil remediation. This study provides a practical measure to consider for concurrent benefits of pollution remediation and utilization of Cd-contaminated soil.

Remediation of copper and lead contaminated sediments using iron-based granule biochar: mechanisms and enzyme activity

In recent years, there has been a growing concern about heavy metal contamination in sediments. In this study, iron-based granular biochar (MGB) is prepared to remediate Cu and Pb contaminated sediments. Characterizations via scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) show that the rough surface of MGB with abundant pore structures and a large number of oxygen-containing functional groups that facilitate stabilization of Cu and Pb in sediments. Potential mobility and bioavailability of Cu and Pb are investigated using BCR sequential extraction in the 35 day remediation experiment. The XPS results indicate that FeOOH and C-OH play a crucial part in stabilizing heavy metals. Large affinity of FeOOH for Pb allows it to occupy a proportion in F₂ while C-OH is attractive to Cu. Changes of pH, organic matter (OM), and available phosphorus (AP) in sediments after adding MGB as well as the relationship between changes and the stable solidification of Cu and Pb are explored. The stable solidification of heavy metals effectively reduces the available phosphorus in sediments. Magnetic and particle properties of the material are used to reduce the impact of MGB aging on sediment environment and separate it from the remediated sediment. Finally, 3% of MGB significantly enhanced the sediment catalase activity in the biological enzyme activity experiment. All findings indicate that MGB is a green and environmentally friendly sediment remediation material with satisfactory potential in synergistically stabilizing heavy metals and phosphorus.Highlights The complexation of FeOOH with Pb on the surface of MGB fixes it to the reduced stateThe C-OH on the surface of MGB is more attractive to Cu than PbMGB effectively mitigates the release of bioavailable phosphorus from sediments to overlying water.

Preparation of sludge-based micro-electrolysis filler and its application in pharmaceutical wastewater treatment by an up-flow aerated filter

Sewage sludge (SS) and raw pharmaceutical wastewater (RPW) are both toxic and harmful wastes, which are a menace to human and animal health and the ecosystem. A sludge-base micro-electrolysis filler (SMEF) was gained by SS and Fe powder as the primary raw materials. The preparation process of the SMEF was achieved based on the tetracycline hydrochloride (TCH) removal efficiency. The physicochemical characteristics (e.g., surface area, morphology features, function groups, and valence state of Fe) of the obtained SMEF were decided. With an Fe/SS ratio of 1/2, a sintering temperature of 1050 °C, a sintering time of 30 min, an initial pH of 3, and a filler dosage of 100 g/L, the SMEF demonstrated a high degradation ability for TCH with a removal rate reached 95.62% in 24 h. Kinetic analysis showed that the adsorption process of TCH was consistent with the pseudo-first-order Lagergren kinetic model. Moreover, degradation mechanism analysis showed that TCH was gradually degraded through dehydroxylation, demethylation, ring opening, oxidation, and reduction in solution. The SMEF had a good continuous removal performance for contaminants in RPW in an up-flow aerated filter. The removal efficiency of TOC and TN reached 46.60 and 42.27% within 24 h, respectively. The treated pharmaceutical wastewater was considered non-biotoxic after 24-h treatment with the SMEF. This study presents a innovative Fe-C micro-electrolysis filler based on SS and is important to the environmental-friendly recycling of SS and sustainable treatment of RPW, achieving the purpose of waste disposal.

The Difference between Rhizosphere and Endophytic Bacteria on the Safe Cultivation of Lettuce in Cr-Contaminated Farmland

Chromium (Cr) is a major pollutant affecting the environment and human health and microbial remediation is considered to be the most promising technology for the restoration of the heavily metal-polluted soil. However, the difference between rhizosphere and endophytic bacteria on the potential of crop safety production in Cr-contaminated farmland is not clearly elucidated. Therefore, eight Cr-tolerant endophytic strains of three species: Serratia (SR-1~2), Lysinebacillus (LB-1~5) and Pseudomonas (PA-1) were isolated from rice and maize. Additionally, one Cr-tolerant strain of Alcaligenes faecalis (AF-1) was isolated from the rhizosphere of maize. A randomized group pot experiment with heavily Cr-contaminated (a total Cr concentration of 1020.18 mg kg^-1) paddy clay soil was conducted and the effects of different bacteria on plant growth, absorption and accumulation of Cr in lettuce (Lactuca sativa var. Hort) were compared. The results show that: (i) the addition of SR-2, PA-1 and LB-5 could promote the accumulation of plant fresh weight by 10.3%, 13.5% and 14.2%, respectively; (ii) most of the bacteria could significantly increase the activities of rhizosphere soil catalase and sucrase, among which LB-1 promotes catalase activity by 224.60% and PA-1 increases sucrase activity by 247%; (iii) AF-1, SR-1, LB-1, SR-2, LB-2, LB-3, LB-4 and LB-5 strains could significantly decrease shoot the Cr concentration by 19.2-83.6%. The results reveal that Cr-tolerant bacteria have good potential to reduce shoot Cr concentration at the heavily contaminated soil and endophytic bacteria have the same or even better effects than rhizosphere bacteria; this suggests that bacteria in plants are more ecological friendly than bacteria in soil, thus aiming to safely produce crops in Cr-polluted farmland and alleviate Cr contamination from the food chain.

High performance self-assembled nano-chlorapatite in the presence of lactonic sophorolipid for the immobilization of cadmium in polluted sediment

A novel lactonic sophorolipid (LS) self-assembled nano-chlorapatite (LS-nClAP) was prepared for the immobilization of severe cadmium (Cd) in sediment. The experimental results indicated that the introduction of LS not only improved the dispersed performance of chlorapatite, but also brought massive hydroxyl and carboxyl groups, which significantly improved the immobilization efficiency of Cd and reduced its eco-toxicity in sediment. LS can significantly increase the effective utilization rate of phosphorus in chlorapatite, and reduce the content of available phosphorus (AP) by half after remediation compared with ClAP. Additionally, the participation of LS possessed a significant impact on the enzyme activities in the sediment, especially for urease, which was closely related to the effective stability of Cd and the introduction of LS. All experimental results of this study provided new insights into the possible effects of Cd immobilization by chlorapatite in contaminated sediments, demonstrating great application potential for sediment remediation in the future.

Immobilizing of lead and copper using chitosan-assisted enzyme-induced carbonate precipitation

Enzyme-induced carbonate precipitation (EICP) is considered as an environmentally friendly method for immobilizing heavy metals (HMs). The fundamental of the EICP method is to catalyze urea hydrolysis using the urease, discharging CO₃^2- and NH₄⁺. CO₃^2- helps to form carbonates that immobilize HMs afterwards. However, HMs can depress urease activity and reduce the degree of urea hydrolysis. Herein, the potential of applying the chitosan-assisted EICP method to Pb and Cu immobilization was explored. The chitosan addition elevated the degree of urea hydrolysis when subjected to the effect of Cu²⁺ toxicity where the protective effect, flocculation and adsorption, and the formation of precipitation, play parts in improving the Cu immobilization efficiency. The use of chitosan addition, however, also causes the side effect (copper-ammonia complex formation). Two calcium source additions, CaCl₂ and Ca(CH₃COO)₂, intervened in the test tube experiments not only to prevent pH from raising to values where Cu²⁺ complexes with NH₃ but also to separate the urease enzyme and Cu²⁺ from each other with the repulsion of charges. The FTIR spectra indicate that the chitosan addition adsorbs Cu²⁺ through its surface hydroxyl and carboxyl groups, while the SEM images distinguish who the mineral are nucleating with. The findings shed light on the potential of applying the chitosan-assisted EICP method to remedy lead- and copper-rich water bodies.

Enhanced Cd(II) immobilization in sediment with zero-valent iron induced by hydrogenotrophic denitrification

In this study, an integrated system of Fe⁰ and hydrogenotrophic microbes mediated by nitrate (nitrate-mediated bio-Fe⁰, NMB-Fe⁰) was established to remediate Cd(II)-contaminated sediment. Solid phase characterization confirmed that aqueous Cd(II) (Cd(II)_aq) was successfully immobilized and enriched on iron surface due to promoted iron corrosion driven by hydrogenotrophic denitrification and subsequent greater biomineral production such as magnetite, lepidocrocite and green rust. Compared to a Cd(II)_aq removal of 21.1% in overlying water of the nitrate-mediated Fe⁰ (NM-Fe⁰) system, the NMB-Fe⁰ system obtained a much higher Cd(II)_aq removal of 83.1% after 7 d remediation. The leaching test and sequential extraction results also showed that the leachability of Cd(II) decreased by 75.9% while the residual fraction of Cd(II) increased by 185.7% in comparison with untreated sediment. Besides, the Cd(II)_aq removal raised with the increase of nitrate concentration and Fe⁰ dosage, further revealing the promotion effect of nitrate on Cd(II) removal by bio-Fe⁰. This study highlighted the involvement of bio-denitrification in the remediation of Cd(II)-contaminated sediment by Fe⁰ and provided a new insight to enhance its reactivity and applicability for Cd(II) immobilization.

Effects of Trichoderma harzianum biofertilizer on growth, yield, and quality of Bupleurum chinense

The use of chemical fertilizers and pesticides led to a decline in the quality and yield of Bupleurum chinense. The aim of this study was to determine the effects of Trichoderma harzianum biofertilizer on the growth, yield, and quality of radix bupleuri and microbial responses. The results showed that T. harzianum biofertilizer promoted the growth of B. chinense and increased the yield and quality of radix bupleuri. In addition, it increased the contents of NH₄ ⁺-N, NO₃ ^--N, available K, and available P and increased the activities of sucrase and catalase in the rhizosphere soil. High-throughput analysis showed that the dominant bacteria in the rhizosphere were Proteobacteria (28%), Acidobacteria (23%), and Actinobacteria (17%), whereas the dominant fungi were Ascomycota (49%), Zygomycota (30%), and Basidiomycota (6%). After the application of T. harzianum biofertilizer, the abundance of Proteobacteria and Actinobacteria (relative to total bacteria) and Ascomycota and Basidiomycota (relative to total fungi) increased, but the relative abundance of Acidobacteria decreased. Canonical correlation analysis (CCA) showed that the relative abundance of Pseudarthrobacter, Streptomyces, Rhizobium, Nocardioides, Minimedusa, and Chaetomium were positively correlated with NO₃ ^--N, NH₄ ⁺-N, available K, available P, sucrase, and catalase in microbial communities, whereas Aeromicrobium and Mortierella were positively correlated with soil organic matter and urease. These results suggest that T. harzianum biofertilizer could significantly improve the yield and quality of radix bupleuri by changing the structure of soil microbial flora and soil enzyme activity. Therefore, it could be recommended for commercial scale production of Bupleurum.

Insights into the mechanisms of aqueous Cd(II) reduction and adsorption by nanoscale zerovalent iron under different atmosphere conditions

Nanoscale zero-valent iron (NZVI) can effectively remove and recover Cd(II) from aqueous solutions. However, the oxygen effects on Cd(II) removal by NZVI have been overlooked and not well studied. In this research, the Cd MNN auger lines obtained by X-ray photoelectron spectroscopy (XPS) revealed that Cd(II) adsorbed on the NZVI surface could be reduced to Cd(0) by the Fe(0) core under anaerobic conditions. With coexisting oxygen, the Cd(II) removal efficiency declined significantly, and Cd(II) reduction was inhibited by the thickened surface γ-FeOOH layer. Furthermore, the post-oxygen intrusion corroded the generated Cd(0) and led to the dramatic leaching of Cd(II) ions. According to the density functional theory (DFT) simulation, the adsorbed Cd(II) was preferably coordinated via a monodentate model on the surface of Fe₃O₄ and γ-FeOOH, which are the dominant surface species of NZVI under anaerobic and aerobic conditions, respectively. Thus, γ-FeOOH with doubly coordinated hydroxyl groups provided fewer adsorption sites than Fe₃O₄ for Cd(II) ions. Overall, the atmospheric conditions of subsurface remediation and wastewater treatment should be considered when applying NZVI for Cd(II) removal. Favorable atmospheric conditions would improve the efficiency and cost-effectiveness of NZVI-based technologies for the practical remediation of Cd(II) pollution.

Carbon and N conservation during composting: A review

Composting, as a conventional solid waste treatment method, plays an essential role in carbon and nitrogen conservation, thereby reducing the loss of nutrients and energy. However, some carbon- and nitrogen-containing gases are inevitably released during the process of composting due to the different operating conditions, resulting in carbon and nitrogen losses. To overcome this obstacle, many researchers have been trying to optimize the adjustment parameters and add some amendments (i.e., pHysical amendments, chemical amendments and microbial amendments) to reduce the losses and enhance carbon and nitrogen conservation. However, investigation regarding mechanisms for the conservation of carbon and nitrogen are limited. Therefore, this review summarizes the studies on physical amendments, chemical amendments and microbial amendments and proposes underlying mechanisms for the enhancement of carbon and nitrogen conservation: adsorption or conversion, and also evaluates their contribution to the mitigation of the greenhouse effect, providing a theoretical basis for subsequent composting-related researchers to better improve carbon and nitrogen conservation measures. This paper also suggests that: assessing the contribution of composting as a process to global greenhouse gas mitigation requires a complete life cycle evaluation of composting. The current lack of compost clinker impact on carbon and nitrogen sequestration capacity of the application site needs to be explored by more research workers.

Characterization of soil microbial community activity and structure for reducing available Cd by rice straw biochar and Bacillus cereus RC-1

The combination of biochar and specific bacteria has been widely applied to remediate Cadmium-contaminated soil. But little is known about how such composites affect the dynamic distribution of metal fractions. This process is accompanied by the alternations of soil properties and microbial community structures. Composite of rice straw biochar and Bacillus cereus RC-1 were applied to investigate its impacts on Cd alleviation and soil microbial diversity and structure. The bacterial/biochar composite treatment decreased the fraction of HOAc-extractable Cd by 38.82%, and increased residual Cd by 23.95% compared to the untreated control. Moreover, compared with the untreated control, the composite treatment significantly increased the soil pH by about 1.5 units, and the activities of catalase, urease and invertase enzymes were increased by 42.39%, 30.50% and 31.20%, respectively. Composite treatment increased soil bacterial and fungal alpha diversity, the relative abundance of Bacillus, Streptomyces, Arthrobacter, and Aspergillus species were also increased. Mantel test and correlation analysis indicated that the effects associated with fungal communities in influencing soil properties were lower than that those of bacterial communities by different treatment. Aggregated boosted tree (ABT) models analysis showed that soil chemical proprieties (as determined by SOM, CEC, AN, etc.,) contributed over 50% of the changes in bacterial and fungal communities by the composite treatment. The co-occurrence network results showed that all treatments enhanced the correlation between OUT groups and improved the possible relationships in the bacterial and fungal communities, especially the interrelationships between bacteria and fungi after the Cd fractions stabilized. These findings provide a new insight to optimal strategies for the remediation of Cd-contaminated soil.

Cadmium resistance, microbial biosorptive performance and mechanisms of a novel biocontrol bacterium Paenibacillus sp. LYX-1

In this study, a novel biocontrol bacterium was isolated and identified as Paenibacillus sp. LYX-1 from soils in the peach orchard. Both Cd²⁺ resistance and biosorption behavior of strain LYX-1 was explored. Meanwhile, the Cd²⁺ resistance and biosorption mechanisms were further identified by Cd-resistant genes, SEM-EDS, FTIR, XPS, and TEM analysis. The results showed that strain LYX-1 could resist 50 mg/L Cd²⁺ and had the CzcD gene responsible for Cd²⁺ efflux. Under pH 8.0 and at a dose of 1.0 g/L sorbent dose, the removal efficiencies of living and dead cells were as high as 90.39% and 75.67% at 20 mg/L Cd²⁺, respectively. For the adsorption isotherm test, results revealed that both Langmuir (R² = 0.9704) and Freundlich (R² = 0.9915) model could describe the Cd²⁺ biosorption well for living strain LYX-1. The maximum equilibrium biosorption capacities of living and dead biomass were 30.6790 and 24.3752 mg/g, respectively. In the adsorption kinetic test, the adsorption process of both living and dead strain LYX-1 all satisfied the pseudo-second kinetic equation. A desorption study showed that strain LYX-1 sorbents could be recycled and regenerated by eluents efficiently. SEM-EDS analysis reflected that Cd²⁺ was bound to the cell wall. Besides, the biosorption process was controlled by chemisorption with the participation of the -OH, -NH, -C = O, O = C-O, C-N, S^2-, and phosphate functional groups on the cell surface of strain LYX-1, which were identified by FTIR and XPS. Bioaccumulation also made a contribution to the Cd²⁺ removal during the biosorption process of living sorbent. The above results indicated that strain LYX-1 had higher Cd²⁺ tolerance and Cd²⁺ removal capacity. This strain exhibits promising application to the removal of Cd²⁺ in the Cd-contaminated environment.

Self-Powered Active Sensing Based on Triboelectric Generators

The demand for portable and wearable chemical or biosensors and their expeditious development in recent years has created a scientific challenge in terms of their continuous powering. As a result, mechanical energy harvesters such as piezoelectric and triboelectric generators (TEGs) have been explored recently either as sensors or harvesters to store charge in small, but long-life, energy-storage devices to power the sensors. The use of energy harvesters as sensors is particularly interesting, as with such multifunctional operations it is possible to reduce the number devices needed in a system, which also helps overcome the integration complexities. In this regard, TEGs are promising, particularly for energy autonomous chemical and biological sensors, as they can be developed with a wide variety of materials, and their mechanical energy to electricity conversion can be modulated by various analytes. This review focuses on this interesting dimension of TEGs and presents various self-powered active chemical and biological sensors. A brief discussion about the development of TEG-based physical, magnetic, and optical sensors is also included. The influence of environmental factors, various figures of merit, and the significance of TEG design are explained in context with the active sensing. Finally, the key applications, challenges, and future perspective of chemical and biological detection via TEGs are discussed with a view to drive further advances in the field of self-powered sensors.

From residue to resource: new insights into the synthesis of functionalized lignin micro/nanospheres by self-assembly technology for waste resource utilization

Among the most abundant biopolymers in the biosphere, lignin is a renewable aromatic compound that represents an untapped opportunity to create new biological products. However, the complex interlacing structures of cellulose, hemicellulose and lignin, as well as the unique properties of lignin, limit the utilization of value-added lignin. Lignin-based nanomaterials open the door for lignin applications in environmental pollutant remediation, biofuel production, biomedicine, and other fields. Herein, we present various factors influencing the formation of micro-nanospheres by self-assembly techniques through a review of previous literature, and emphasize the simple and green synthesis of lignin micro/nanospheres (LMNPs) under non-modified conditions. More importantly, we discuss the mechanism of the formation of nanospheres. Considering the heterogeneity of lignin and the polarity of different solvents, we propose that self-assembly techniques should focus more on the influence brought by lignin itself or the solvent, so that the external conditions can be controlled to prepare LMNPs, which can be used in specific fields. A brief overview of the contribution of lignin-based nanomaterials in various fields is also presented. This review could provide insight for the development of lignin-based nanomaterials.

Pivotal roles of nanoscale zerovalent iron supported on metal-organic framework material in cadmium (II) migration and transformation in soil

Cadmium (Cd) contamination in soils is of great concern, and therefore the development of effective remediation technologies for cadmium contamination is urgent. In our study, nano zero-valent iron (NZVI) supported by metal-organic framework (MOF) materials (MOF-NZVI) were prepared using NaBH₄ and FeCl₃ to try to solve the soil Cd remediation problem. Herein, the effects and the mechanism of MOF-NZVI for the immobilization of Cd in contaminated soil was investigated. The results showed that MOF-NZVI was capable of converting Cd in soil from weak acid extractable and reducible fractions to oxidizable and residual states, thus effectively reducing the toxicity of Cd in soil. FTIR and XRD analysis confirmed that the dominant reaction mechanism between MOF-NVZI and Cd is adsorption with complexation, and the stabilization of Cd is achieved by the formation of compounds such as FeOCdOH.

Microwave-assisted iron oxide process for efficient removal of tetracycline

Excess tetracycline produced by livestock and poultry breeding industry not only pollute the environment, but also enter the human body with the spread of the food chain, which will produce drug-resistant genes and threaten human health. In this paper, the adsoption of tetracycline from wastewater using iron oxide under microwave oxidation condition was explored. The effect of initial pollutant concentrations, the dosage of iron oxide, pH value, and temperature on the hybrid treatment process was investigated. Under the normal iron oxide and microwave oxidation conditions, when the dosage of iron oxide was 40 g/L and 30 g/L, pH was 10 and the temperature was 318 K, the removal rate of tetracycline was significantly improved. The adsorption of tetracycline by iron oxide under the two conditions conformed to the Freundlich isotherm model and pseudo-second-order dynamics model. In addition, the associated adsorption mechanism was unveiled. Under the microwave oxidation condition, the hot spot effect generated by the microwave oxidation effect would rapidly increase its surface temperature to form the active center and the electrostatic gravity to promote the reaction. The results indicated that microwave oxidation could promote the removal of antibiotics by iron oxide in livestock and poultry breeding wastewater.

Research progress of microplastics in soil-plant system: Ecological effects and potential risks

The effect of microplastics on soil ecosystem is a hot topic in recent years. It is increasingly recognized that soil is also an important sink for microplastics in addition to the aquatic environment. This review aims to discuss the direct and indirect effects of microplastics on the soil-plant system, focusing on the effects of microplastics on soil aggregates and soil nutrient cycling as well as the combined effects of microplastics and other pollutants on soil-plant systems. Microplastics have been shown to affect the rooting ability of plants by altering soil bulk density and water-holding capacity, as well as reducing photosynthetic rate by directly interfering with the balance of plant chlorophyll a/chlorophyll b ratios. In addition, microplastics affect the stability of aggregates by interfering with abiotic factors (e.g., sesquioxide and exchangeable cations) or biotic factors (e.g., soil organic matter and organism activities in the soil). Moreover, microplastics may affect soil nutrient cycling by altering the dominant bacteria phyla in the soil or genes and enzymes associated with the carbon, nitrogen, and phosphorus cycle. When microplastics and other pollutants have combined effects on plants, microplastics attached onto the root surface physically hamper the contact of the pollutants with the roots but are more likely to exacerbate the damage of pollutants to plants. Different types, sizes and concentrations of microplastics have different effects on the soil-plant system. Microplastics with similar shape and size to soil particles have less significant effects, while microfibers, small-sized microplastics and biodegradable plastic particles have more significant effects. Finally, this review also provides an outlook for future research.

Mechanistic insights into soil heavy metals desorption by biodegradable polyelectrolyte under electric field

In this study, we firstly used alginate to enhance an electrokinetic technology to remediate soil contaminated with divalent heavy metals (Pb²⁺, Cu²⁺, Zn²⁺). The mechanisms of alginate-associated migration of metal ions in electric field were confirmed. Alginate resulted in a high electrical current during electrokinetic process, and soil conductivity also increased after remediation. Obvious changes in both electroosmotic flow and soil pH were observed. Moreover, these factors were affected by increasing alginate dosage. The highest Cu (95.82%) and Zn (97.33%) removal efficiencies were obtained by introducing 1 wt% alginate. Alginate can desorb Cu²⁺ and Zn²⁺ ions from soil by forming unstable gels, which could be dissociated through electrolysis. However, Pb²⁺ ions did not easily migrate out of the contaminated soil. The density functional theory (DFT) calculations show Pb²⁺ ions could form a more stable coordination sphere in metal complexes than Cu²⁺ and Zn²⁺ ions. The metal removal efficiency was decreased by increasing alginate dosage at a high level. More alginate could provide more carboxyl ligands for divalent metal ions to stabilize gels, which were difficult to dissociate by electrolysis. In summary, the results indicate it is potential for introducing alginate into an electrokinetic system to remediate Cu- and Zn- contaminated soil.

Stabilization of cadmium in contaminated sediment based on a nanoremediation strategy: Environmental impacts and mechanisms

Nanomaterials have great application potential for the remediation of heavy metal contaminated sediments, but their environmental impacts are still limited. Herein, graphene oxide-supported nanoscale zero-valent iron (GNZVI) was synthesized to explore its role in mediating the immobilization of cadmium (Cd) from contaminated river sediments, with the consideration of the potential impacts on sediment enzyme activities and bacterial community. Compared to NZVI and GO, GNZVI could more effectively promote the transformation of mobile Cd into stable speciation with a maximum residual percentage increasing by 64.82% after 56 days of treatment. The activities of urease, catalase and sucrase were gradually increased and stabilized with the prolongation of treatment time, indicating that the metabolic function of sediments was recovered. 16 S rRNA gene sequencing results confirmed that the application of GNZVI increased the abundance of some Fe(III)-reducing bacteria, further stimulating the bioavailability of organic matter. Additionally, the properties of GO were gradually changed via microbial reduction and finally showed similar properties to rGO. The critical role of rGO as an electrical conductor was to promote the electron transfer process of microbial Fe(III) mineral reduction, which redistributes part of the Fe(III) mineral-associated Cd to more stable secondary iron minerals, thereby further improving the stabilization efficiency of r-GNZVI for Cd.

Enhanced cadmium immobilization by sulfate-mediated microbial zero-valent iron corrosion

A biotic iron (Fe⁰) treatment system combined with mixed microorganisms was applied to remediate cadmium (Cd)-contaminated groundwater under the intervention of sulfate. Due to hydrogenotrophic desulfuration effect, severe iron corrosion was observed in this microbe-collaborative Fe⁰ system according to surface morphology analysis as lots of secondary minerals (e.g. magnetite, green rust and lepidocrocite) were generated, which was essential for Cd(II) adsorption and immobilization. The sulfate-mediated biotic Fe⁰ system thereafter achieved a significantly enhanced Cd(II) removal efficiency of 86.1%, over 3.3 times than that in the abiotic Fe⁰ system. Increasing initial sulfate concentration could improve the removal of cadmium, which further proved that hydrogenotrophic desulfuration played a key role for enhanced Cd removal. According to the experimental results and current reports, the mechanism of Cd(II) removal was revealed into three pathways including adsorption to secondary iron minerals, co-precipitation with iron (hydr)oxides and formation of cadmium sulfide precipitation. Increasing Fe⁰ dosages showed positive correlation to Cd(II) removal and neutral pH was preferred to sulfate-mediated biotic Fe⁰ corrosion. These results indicated that sulfate-mediated biotic Fe⁰ corrosion could greatly relieve the limitation of Fe⁰ in Cd(II) immobilization, which could be a promising method to eliminate Cd(II) pollution from groundwater.

Superior elimination of Cr(VI) using polydopamine functionalized attapulgite supported nZVI composite: Behavior and mechanism

In this study, a polydopamine (PDA) modified attapulgite (ATP) supported nano sized zero-valent iron (nZVI) composite (PDA/ATP-nZVI) was rapidly synthesized under acidic conditions, and employed to alleviate Cr(VI) toxicity from an aqueous solution. Kinetic studies revealed that Cr(VI) adsorption process followed the pseudo-second order model, suggesting chemisorption was the dominant adsorption mechanism. Liu isotherm adsorption model was able to better describe the Cr(VI) adsorption isotherm with the maximum adsorption capacity of 134.05 mg/g. The thermodynamic study demonstrated that the adsorption process occurred spontaneously, accompanied by the increase in entropy and endothermic reaction. Low concentrations of coexisting ions had negligible effects on the removal of Cr(VI), while high concentrations of interfering ions were able to facilitate the removal of Cr(VI). Reactive species test revealed that Fe²⁺ played a key role in Cr(VI) reduction by PDA/ATP-nZVI. PDA enhanced the elimination of Cr(VI) via donation of electrons to Cr(VI) and acceleration of Fe³⁺ transformation to Fe²⁺. Furthermore, PDA was able to effectively inhibit the leaching of iron species and generation of ferric hydroxide sludge. Mechanistic study revealed that 72% of Cr(VI) elimination was attributed to reduction/precipitation, while 28% of Cr(VI) elimination was due to the surface adsorption.

Effect of dissolved organic matter on the phytoremediation of Cd-contaminated soil by cotton

Dissolved organic matter (DOM) assists in the phytoremediation of heavy-metal-contaminated soils, but the effect of synergistic remediation of DOM on plants is unclear. This study investigated the effect of two DOM sources (cotton straw (CM) DOM and farmyard manure (FM) DOM) on cadmium (Cd) accumulation in Cd-contaminated soil by cotton and evaluated the phytoremediation effect of DOM. The results showed that adding DOM reduced the available nitrogen and increased organic matter, available phosphorus and available potassium. Applying DOM increased the proportions of Cd acid soluble fractions and reduced the proportions of Cd residual fractions by 1-7%. DOM application increased root length, root surface area and root volume compared to the control and had a promoting or inhibiting effect on cotton biomass, depending on the soil Cd concentration. Furthermore, applying DOM improved the Cd content and bioconcentration factor of cotton. The lower the molecular weight, hydrophilic components and aromaticity of DOM, the more conducive to Cd accumulation is in cotton. The correlation and random forest analyses also showed that CM showed high remediation potential. According to our study, DOM can improve the phytoremediation efficiency of cotton, especially in low-concentration contaminated soils. This study provides a basis for applying DOM in the phytoremediation of Cd-contaminated soils.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Fast preparation of Fe3O4@polydopamine/Au for highly efficient degradation of tetracycline

This work reported the fast synthesis of magnetic polydopamine Au-Fenton catalyst (Fe₃O₄@PDA/Au) under UV irradiation at 365 nm. The microstructure of prepared nanocomposites was characterized by various techniques. The effects of several key factors (pH values, H₂O₂ content and TC concentration) of tetracycline (TC) degradation were evaluated. The results revealed that the TC and total organic carbon (TOC) removal rate reached up to 98.16% and 93.14% within 300 min under optimal conditions (pH 3, H₂O₂ 80 μL, TC concentration 20 mg/L). Besides, HO radicals were generated during the Fenton-like degradation process and the plausible degradation mechanism was discussed. Moreover, Fe₃O₄@PDA/Au catalyst retained excellent catalytic capacity (TC removal rate 96.94% and TOC removal rate 87.69%) and exhibited fantastic stability after six cycles. Moreover, metal ions leaching was evaluated (0.023 mg/L). Altogether, the novel Fe₃O₄@PDA/Au Fenton-like catalyst is highly promising for wastewater management.

Performance of biochar-supported nanoscale zero-valent iron for cadmium and arsenic co-contaminated soil remediation: Insights on availability, bioaccumulation and health risk

Simultaneous stabilization of cadmium (Cd) and arsenic (As) in co-contaminated soil is challenging in environmental remediation because of their opposite properties. In this study, biochar-supported nanoscale zero-valent iron (nZVI-BC) was designed for simultaneously decreasing the soil availability of Cd and As and their bioaccumulation in vegetables. It was found that nZVI-BC exhibited remarkable performance for the stabilization of Cd and As in soil, and their availability decreased by 34.93% and 32.64% compared to the control sample, respectively, under 1.00% nZVI-BC treatment. The increase of soil pH and complexation dominated the Cd remediation process, while the formation of precipitation together and surface complexes transformed labile As into stable forms. Pot experiments showed that nZVI-BC application inhibited the bioaccumulation of Cd and As in vegetables by 23.63-36.48% and 43.09-45.10%, respectively, and hence effectively decreased the cancer risks by 38.19-42.93% related with vegetable consumption (P < 0.05). This study revealed that nZVI-BC is a promising amendment for achieving the simultaneous remediation of Cd and As co-contaminated farmland soil.

A review of the new multifunctional nano zero-valent iron composites for wastewater treatment: Emergence, preparation, optimization and mechanism

Nano zero-valent iron (NZVI) with high chemical reactivity and environmental friendliness had recently become one of the most efficient technologies for wastewater restoration. However, the unitary NZVI system had not met practical requirements for wastewater treatments. Expectantly, the development of NZVI would prefer multifunctional NZVI-based composites, which could be prepared and optimized by the combined methods and technologies. Consequently, a systematic and comprehensive summary from the perspective of multifunctional NZVI-composite had been conducted. The results demonstrated that the advantages of various systems were integrated by multifunctional NZVI-composite systems with a more significant performance of pollutant removal than those of the bare NZVI and its composites. Simultaneously, characteristics of the product prepared by the incorporation of numerous methods were superior to those by a simple method, resulting in the increase of the entirety efficiency. By comparison with other preparation methods, the ball milling method with higher production and field application potential was worthy of attention. After combining multiple technologies, the effect of NZVI and its composite systems could be dramatically strengthened. Preparation technology parameters and treatment effect of contaminants could be further optimized using more comprehensive experimental designs and mathematical models. The mechanism of the multifunctional NZVI system for contaminants treatment was primarily focused on adsorption, oxidation, reduction and co-precipitation. Multiple techniques were combined to enhance the dispersion, alleviating passivation, accelerating electron transfer efficiency or mass transfer action for optimizing the effect of NZVI composites.

Effects of virgin microplastics on the transport of Cd (II) in Xiangjiang River sediment

River sediments are considered as sinks of microplastics (MPs). Although numerous studies have been conducted on MPs pollution in river sediments, the impact of MPs on the environmental behavior of Cd (II) in river sediments is still unknown. In this work, the effects of six MPs (polyethylene, polypropylene, polystyrene, polyvinyl chloride, polymethyl methacrylate and polylactic acid) on the adsorption of Cd (II) by Xiangjiang River sediment and the transport of Cd (II) in sediment were studied. The results showed that the adsorption ability of sediment to Cd (II) decreased with the increase of the content of MPs in sediment. When the content of MPs in sediment increased to 10%, polypropylene had the greatest effect on the adsorption affinity of sediments to Cd (II). Moreover, the addition of MPs accelerated transport of Cd (II) in sediment, and the transport of Cd (II) in sediment increased with the increase of the content of MPs. The reason may be that after adding MPs, the adsorption capacity of sediment to Cd (II) decreases, and the mass transfer resistance of Cd (II) to sediment reduces, which leads to faster transport of Cd (II) in sediment. Especially, when the content of MPs in sediment increased to 10% (w/w), the saturation point of the breakthrough curve decreased by about 70 pore volumes. This work hopes to provide helpful views on the environmental behavior and risk assessment of Cd (II) in the presence of MPs.

Boron nitride quantum dots decorated MIL-100(Fe) for boosting the photo-generated charge separation in photocatalytic refractory antibiotics removal

Metal organic frameworks (MOFs) have great potential for photocatalysis, but only possess moderate activity due to their slow charge transfer and low solar energy conversion. Herein, heterostructures photocatalysts constructed by boron nitride quantum dots (BNQDs) and MIL-100(Fe) (MNB) were successfully fabricated for overcoming these shortcomings. It was indicated that the composites possessed large surface area, mesoporous structure, and enhanced visible light absorption. The MNB photocatalysts exhibited excellent photocatalytic activity for tetracycline hydrochloride (TC-HCl) degradation under visible light irradiation. Compared with MIL-100(Fe), the photodegradation rate of TC-HCl by MNB-1 was 0.02383 min^-1, which was 5.3 times higher than that of pure MIL-100(Fe). The close contact of MIL-100(Fe) with BNQDs and the synergistic effect between them were the main reasons for the improved photodegradation performance. This study reveals that a rational combination of MIL-100(Fe) and BNQDs can improve photocatalytic activity to enhance molecular oxygen activation. Therefore, it is reasonable to believe that quantum dots/MOFs photocatalysts have great potential in environmental remediation.

Evaluating the metabolic functional profiles of the microbial community and alfalfa (Medicago sativa) traits affected by the presence of carbon nanotubes and antimony in drained and waterlogged sediments

Antimony (Sb) is the ubiquitous re-emerging contaminant greatly accumulated in sediments which has been revealed risky to ecological environment. However, the impacts of Sb (III/V) on microbes and plants in sediments, under different water management with presence of engineering materials are poorly understood. This study conducted sequential incubation of sediments (flooding, draining and planting) with presence of multiwall carbon nanotubes (MWCNTs) and Sb to explore the influence on microbial functional diversity, Sb accumulation and alfalfa traits. Results showed that water management and planting led to greater impacts of sediment enzyme activities and microbial community metabolic function and bioavailable Sb fractions (defined as sum of acid-soluble fraction and reducible fraction, F1 + F2). Available fractions of Sb (V) showed higher correlation to microbial metabolism (r = 0.933) than that of Sb (III) (r = -0.480) in planting stage. MWCNTs with increasing concentrations (0.011%, w/w) positively correlated to microbial community metabolic function in planting stage whereas resulted in decreasing of Sb (III/V) concentrations in alfalfa, although 0.01% MWCNT led to increase of Sb (V) and decrease of Sb (V) by 50.97% and 32.68% respectively. This study provided information for investigating combined ecological impacts of heavy metal and engineering materials under different water managing sediments.

"In-situ synthesized" iron-based bimetal promotes efficient removal of Cr(VI) in by zero-valent iron-loaded hydroxyapatite

Anionic Cr(VI) and cationic heavy metals generally co-exist in industrial effluents and threaten the public health. Zero-valent iron (ZVI) particles tent to passivate rapidly, which results in a gradual drop in its reactivity. In this work, a strategy of "in-situ synthesized" iron-based bimetal was first developed to stimulate the self-activation of passivated ZVI. During this process, ZVI-loaded hydroxyapatite (ZVI/HAP) was prepared to enhance the affinity for co-existing Cu²⁺, which promoted the in-situ Cu⁰ deposition on ZVI/HAP to form a Fe-Cu bimetal. The deposited Cu⁰ significantly decreased the activation energy (E_a) of Cr(VI) reduction by 24.9%, and its corresponding Cr(VI) removal (96.53%) was much higher that of single Cr(VI) system (68.67%) within 9 h. More importantly, the removal of Cr(VI) and Cu²⁺ were synchronously achieved. Systematical electrochemical characterizations were first introduced to explore the galvanic behaviors of iron-based bimetal. The charge transfer resistance and the negative open circuit potential of ZVI/HAP significantly decreased with the Cu⁰ deposition, thereby accelerating the electron transfer from Fe⁰ to Cu²⁺. The enhanced electron transfer further facilitated the Fe(II) release to promote Cr(VI) reduction. This "in-situ synthesized" iron-based bimetal strategy provides a novel pattern for ZVI activation and exhibits practical application in remediation of combined contaminant.

A functional peptide-mediated colorimetric assay for mercury ion based on dual-modified gold nanoparticles

In the work, a rapid and accurate biosensor for mercury ions (Hg²⁺) was constructed, with which aggregation of dual-modified (DGPFHR- and CALNN-) gold nanoparticles (D/C-AuNPs) could be triggered by the high specificity of peptides to Hg²⁺. The given peptide DGPFHR possesses great capability of capturing Hg²⁺, accompanied by the conformational folding. Under the circumstances, D/C-AuNPs were employed as the detection probes to accomplish the quantitative analysis of Hg²⁺. This is primarily because the specific Hg²⁺-induced folding of peptides reduces the electrostatic repulsion and steric hindrance, thus accelerating the AuNPs aggregation. The principle and application potential of this proposal was proved by evidence. And the results demonstrated that Hg²⁺ ions could be selectively detected as low as 28 nM with a linear range of 100-800 nM. In consideration of superior simplicity, selectivity, accuracy and stability, the protocol was advantageous over other projects in practical measurement of various water samples.

Phosphate functionalized iron based nanomaterials coupled with phosphate solubilizing bacteria as an efficient remediation system to enhance lead passivation in soil

Bioremediation technology has attracted increasing interest due to it efficient, economical and eco-friendly to apply to heavy metal contaminated soil. This study presents a new biological remediation system with phosphate functionalized iron-based nanomaterials and phosphate solubilizing bacterium strain Leclercia adecarboxylata. Different phosphate content functionalized iron-based nanomaterials were prepared, and nZVI@C/P1 (nP: nFe: nC=1:10:200) with high passivation efficiency was selected to combine with PSB for the remediation experiments. The change in lead fraction and microbial community under five conditions (CK, PSB, nZVI@C, nZVI@C/P1, nZVI@C/P1 + PSB) during 10 days incubation were investigate. The results indicated that nZVI@C/P1 + PSB increased the residual fraction of lead by 93.94% compared with the control group. Meanwhile, inoculation of Leclercia adecarboxylata became the dominant microflora in the soil microbial community during the remediation time, improving the utilization rate of phosphate in nZVI@C/P1 and enhancing the passivation efficiency of lead. Experimental findings demonstrated that combining nZVI@C/P1 with PSB could be considered as an efficient strategy for the lead contaminated soil remediation.