Surface modified TiO2 floating photocatalyst with PDDA for efficient adsorption and photocatalytic inactivation of Microcystis aeruginosa

Recent advances in visible light driven inactivation of bloom forming blue-green algae using novel nano-composites: Mechanism, efficiency and fabrication approaches

Over the years, algae have proved to be a water pollutant due to global warming, climate change, and the unregulated addition of organic compounds in water bodies from diffused resources. Harmful algal blooms (HABs) are severely affecting the health of humans and aquatic ecosystems. Among available anti-blooming technologies, semiconductor photocatalysis has come forth as an effective alternative. In the recent past, literature has been modified extensively with a decisive knowledge regarding algal invasion, desired preparation of nanomaterials with enhanced visible light absorption capacity and mechanisms for algal cell denaturation. The motivation behind this review article was to gather algal inactivation data in a systematic way based on various research studies, including the construction of nanoparticles and purposely to test their anti-algal activities under visible irradiation. Additionally, this article mentions variety of starting materials employed for preparation of various nano-powders with focus on their synthesis routes, analytical techniques as well as proposed mechanisms for lost cellular integrity in context of reduced chlorophyll' a' level, cell rapture, cell leakage and damages to other physiological constituents; credited to oxidative damage initiated by reactive oxidation species (ROS). Various floating and recyclable composited catalysts Ag2CO3-N: GO, Ag/AgCl@ZIF-8, Ag2CrO4-g-C3N4-TiO2/mEP proved to be game-changers owing to their enhanced VL absorption, adsorption, stability, separation and reusability. An outlook for the generalized limitations of published reports, cost estimations for practical implementation, issues and challenges faced by nano-photocatalysts and possible opportunities for future studies are also proposed. This review will be able to provide vast insights for coherent fabrication of catalysts, breakthroughs in experimental methodologies and help in elaboration of damage mechanisms.

Floating photocatalysts as promising materials for environmental detoxification and energy production: A review

The oxygenation process of the catalyst surface, the incident-light harvesting capability, and facile recycling of utilized photocatalysts play key role in the outstanding photocatalytic performances. The typical existing photocatalysts in powder form have many drawbacks, such as difficult separation from the treated water, insufficient surface oxygenation, poor active surface area, low incident-light harvesting ability, and secondary pollution of the environment. A great number of scientific works introduced novel and fresh ideas related to designing floating photocatalytic systems by immobilizing highly active photocatalysts onto a floatable substrate. Thanks to direct contact with the illuminated light and oxygen molecules in the interface of water/air, the photocatalytic performance is maximized through production of more reactive species, employed in the photocatalytic reactions. Furthermore, facile recovering of the utilized photocatalysts for next processes avoids secondary pollution as well as diminishes the process's price. This review highlights the performance of developed floating photocatalysts for diverse applications. Furthermore, different floating substrates and possible mechanisms in floating photocatalysts are briefly mentioned. In addition, several emerging self-floating photocatalytic systems are taken attention and discussed. Specially, coupling photo-thermal and photocatalytic effects seems to be a good strategy for introducing a new class of floating photocatalyst to utilize the free, abundant, and green sunlight energy for the aims of water desalination and purification. Despite of a large number of attempts about the floating photocatalysts, there are still plenty of rooms for more in-depth research to be carried out for attaining the required characteristics of the large scale utilizations of these materials.

Recent progress and prospect of graphitic carbon nitride-based photocatalytic materials for inactivation of Microcystis aeruginosa

The proliferation of harmful algal blooms is a global concern due to the risk they pose to the environment and human health. Algal toxins which are hazardous compounds produced by dangerous algae, can potentially kill humans. Researchers have been drawn to photocatalysis because of its clean and energy-saving properties. Graphite carbon nitride (g-C3N4) photocatalysts have been extensively studied for their ability to eliminate algae. These photocatalysts have attracted notice because of their cost-effectiveness, appropriate electronic structure, and exceptional chemical stability. This paper reviews the progress of photocatalytic inactivation of harmful algae by g-C3N4-based materials in recent years. A brief overview is given of a number of the modification techniques on g-C3N4-based photocatalytic materials, as well as the process of inactivating algal cells and destroying their toxins. Additionally, it provides a theoretical framework for future research on the eradication of algae using g-C3N4-based photocatalytic materials.

Antibacterial and sunlight-driven photocatalytic activity of graphene oxide conjugated CeO2 nanoparticles

This work focuses on the structural, morphological, optical, photocatalytic, antibacterial properties of pure CeO2 nanoparticles (NPs) and graphene oxide (GO) based CeO2 nanocomposites (GO-1/CeO2, GO-5/CeO2, GO-10/CeO2, GO-15/CeO2), synthesized using the sol-gel auto-combustion and subsequent sonication method, respectively. The single-phase cubic structure of CeO2 NPs was confirmed by Rietveld refined XRD, HRTEM, FTIR and Raman spectroscopy. The average crystallite size was calculated using Debye Scherrer formula and found to increase from 20 to 25 nm for CeO2 to GO-15/CeO2 samples, respectively. The related functional groups were observed from Fourier transform infrared (FTIR) spectroscopy, consistent with the outcomes of Raman spectroscopy. The optical band gap of each sample was calculated by using a Tauc plot, which was observed to decrease from 2.8 to 1.68 eV. The valence state of Ce (Ce3+ and Ce4+) was verified using X-ray photoelectron spectroscopy (XPS) for CeO2 and GO-10/CeO2. The poisonous methylene blue (MB) dye was used to evaluate the photocatalytic activity of each sample in direct sunlight. The GO-15/CeO2 nanocomposite showed the highest photocatalytic activity with rate constant (0.01633 min-1), and it degraded the MB dye molecules by 100% within 120 min. The high photocatalytic activity of this material for degrading MB dye establishes it as an outstanding candidate for wastewater treatment. Further, these nanocomposites also demonstrated excellent antimicrobial activity against Pseudomonas aeruginosa PAO1.

"Needle" hidden in silk floss: Inactivation effect and mechanism of melamine sponge loaded bismuth oxide composite copper-metal organic framework (MS/Bi2O3@Cu-MOF) as floating photocatalyst on Microcystis aeruginosa

Photocatalytic technology showed significant potential for addressing the issue of cyanobacterial blooms resulting from eutrophication in bodies of water. However, the traditional powder materials were easy to agglomerate and settle, which led to the decrease of photocatalytic activity. The emergence of floating photocatalyst was important for the practical application of controlling harmful algal blooms. This study was based on the efficient powder photocatalyst bismuth oxide composite copper-metal organic framework (Bi2O3 @Cu-MOF), which was successfully loaded onto melamine sponge (MS) by sodium alginate immobilization to prepare a floating photocatalyst MS/Bi2O3 @Cu-MOF for the inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. When the capacity was 0.4 g (CA0.4), MS/Bi2O3 @Cu-MOF showed good photocatalytic activity, and the inactivation rate of M. aeruginosa reached 74.462% after 120 h. MS/Bi2O3 @Cu-MOF-CA0.4 showed a large specific surface area of 30.490 m2/g and an average pore size of 22.862 nm, belonging to mesoporous materials. After 120 h of treatment, the content of soluble protein in the MS/Bi2O3 @Cu-MOF-CA0.4 treatment group decreased to 0.365 mg/L, the content of chlorophyll a (chla) was 0.023 mg/L, the content of malondialdehyde (MDA) increased to 3.168 nmol/mgprot, and the contents of various antioxidant enzymes experienced drastic changes, first increasing and then decreasing. The photocatalytic process generated·OH and·O2-, which played key role in inactivating the algae cells. Additionally, the release of Cu2+ and adsorption of the material also contributed to the process.

Improving bioelectrochemical performance by sulfur-doped titanium dioxide cooperated with Zirconium based metal-organic framework (S-TiO2@MOF-808) as cathode in microbial fuel cells

The sulfur-doped titanium dioxide (S-TiO2) cooperated with Zirconium based on a kind of metal-organic framework (MOF-808) was successfully prepared as cathode catalyst (S-TiO2@MOF-808) of microbial fuel cell (MFC) by two-step hydrothermal reaction. The particle size was approximately 5 μm, and the spherical S-TiO2 particle was attached to the surface of MOF-808 as irregular block solid. Zr-O, C-O and O-H bond were indicated to exist in S-TiO2@MOF-808. When n (Zr4+): n(Ti4+) was 1: 5, S-TiO2@MOF-808 showed better oxygen reduction reaction (ORR). The introduction of S-TiO2 restrained the framework collapse of MOF-808, S-TiO2@MOF-808 showed much higher catalytic stability in reaction. The recombination of sulfur and TiO2 reduced the charge transfer resistance, accelerated the electron transfer rate, and improved ORR greatly. The maximum power density of S-TiO2@MOF-808-MFC was 84.05 mW/m2, about 2.17 times of S-TiO2-MFC (38.64 mW/m2). The maximum voltage of S-TiO2@MOF-808-MFC was 205 mV, and the stability was maintained for 6 d.

Magnetically recyclable Cu2+ doped Fe3O4@biochar for in-situ inactivation of Microcystis aeruginosa: Performance and reusability

Harmful cyanobacterial blooms in eutrophic water bodies have frequently occurred worldwide and become a major environmental concern. Therefore, it is imperative to develop a stable and efficient algaecide to solve this issue. In this study, our purpose was to investigate the efficacy and mechanism of a newly developed Cu2+ doped Fe3O4@Biochar magnetic composite (Cu-Mag-BC) in in-situ inactivation of Microcystis aeruginosa (M. aeruginosa). We successfully synthesized the Cu-Mag-BC by coating Cu2+ onto Fe3O4@Biochar. Cu-Mag-BC exhibited superparamagnetic behavior and was uniformly impregnated by Cu2+. Cu-Mag-BC (5 mg/L), rapidly inactivated chlorophyll-a (Chl-a) in M. aeruginosa with low Fe and Cu leaching, during which time the OD264 value and malondialdehyde (MDA) content increased, while the activities of superoxide dismutase (SOD) and catalase (CAT) first increased and then decreased, due to oxidative stress induced by over-generated reactive oxygen species (ROS). Quantitative results showed that ·O2- and ·OH were the main ROS species produced from Cu-Mag-BC. Inactivation efficiency was maintained at approximately 80 % after three consecutive runs and total Chl-a removal efficiency reached 2.84 g/g, indicating good reusability and stability. A possible inactivation mechanism is proposed; amino groups and adipose chain were the primary oxidation sites. Thus, Cu-Mag-BC shows potential as a candidate for simultaneously inactivating harmful cyanobacteria and preventing secondary pollution.

The selection of floating photocatalyst carrier and algae inhibition effect of Karenia mikimotoi based on SNP-TiO2@Cu-MOF under visible light

Photocatalytic technology for inactivating harmful algae has shown great research potential, in previous work, a kind of non-noble metal modified TiO2 loading onto copper metal organic framework (SNP-TiO2@Cu-MOF) was proved to show high removal efficiency against Karenia mikimotoi (K. mikimotoi). However, the recovery problem of powdered photocatalysts and its potential ecological hazards were still existed. In order to solve this, this study selected four macro-floating carriers and loaded photocatalyst on their surface. The floating photocatalyst with luffa sponge and expanded perlite as carriers were prepared by hydrothermal synthesis, and the floating photocatalyst with melamine sponge and polyurethane sponge as carriers were prepared by sodium alginate fixation method. The photocatalyst was firmly supported on the carriers, and the octahedral structure of SNP-TiO2@Cu-MOF photocatalyst could be well retained by hydrothermal synthesis. The advantages of sodium alginate fixation method were simple preparation process and low cost. The specific surface area of melamine foam photocatalyst (MF-P) was the highest, 28.47 m2/g, and the algae inactivation rate was also the best, which was 98.68% in 6 h. The MF-P group showed a decrease of 81.8% in soluble protein content and 81.4% in chlorophyll-a content of K. mikimotoi after 1 h of photocatalysis, respectively. The four photocatalysts showed good recyclability, and especially in MF-P group. The inactivation efficiency was still as high as 94.12% after four experiments. The floating photocatalyst would lay the foundation for further application of photocatalytic materials for algae removal.

Developing self-floating N-defective graphitic carbon nitride photocatalyst for efficient photodegradation of Microcystin-LR under visible light

The frequent occurrence of algal blooms in water bodies leads to a significant accumulation of microcystin-LR (MC-LR). In this study, we developed a porous foam-like self-floating N-deficient g-C3N4 (SFGN) photocatalyst for efficient photocatalytic degradation of MC-LR. Both the characterization results and DFT calculations indicate that the surface defects and floating state of SFGN synergistically enhance light harvesting and photogenerated carrier migration rate. The photocatalytic process achieved a nearly 100 % removal rate of MC-LR within 90 min, while the self-floating state of SFGN maintained good mechanical strength. ESR and radical capture experiments revealed that the primary active species responsible for the photocatalytic process was OH. This finding confirmed that the fragmentation of MC-LR occurs as a result of OH attacking the MC-LR ring. LC-MS analysis indicated that majority of the MC-LR molecules were mineralized into small molecules, allowing us to infer possible degradation pathways. Furthermore, after four consecutive cycles, SFGN exhibited remarkable reusability and stability, highlighting the potential of floating photocatalysis as a promising technique for MC-LR degradation.

Effective photodegradation of antibiotics by guest-host synergy between photosensitizer and bismuth vanadate: Underlying mechanism and toxicity assessment

The removal of antibiotics in wastewater has attracted increasing attention. Herein, a superior photosensitized photocatalytic system was developed with acetophenone (ACP) as the guest photosensitizer, bismuth vanadate (BiVO₄) as the host catalyst and poly dimethyl diallyl ammonium chloride (PDDA) as the bridging complex, and used for the removal of sulfamerazine (SMR), sulfadiazine (SDZ) and sulfamethazine (SMZ) in water under simulated visible light (λ > 420 nm). The obtained ACP-PDDA-BiVO₄ nanoplates attained a removal efficiency of 88.9%-98.2% for SMR, SDZ and SMZ after 60 min reaction and achieved kinetic rate constant approximately 10, 4.7 and 13 times of BiVO₄, PDDA-BiVO₄ and ACP-BiVO₄, respectively, for SMZ degradation. In the guest-host photocatalytic system, ACP photosensitizer was found to have a great superiority in enhancing the light absorption, promoting the surface charge separation-transfer and efficient generation of holes (h⁺) and superoxide radical (·O₂^-), greatly contributing to the photoactivity. The SMZ degradation pathways were proposed based on the identified degradation intermediates, involving three main pathways of rearrangement, desulfonation and oxidation. The toxicity of intermediates was evaluated and the results demonstrated that the overall toxicity was reduced compared with parent SMZ. This catalyst maintained 92% photocatalytic oxidation performance after five cyclic experiments and displayed a co-photodegradation ability to others antibiotics (e.g., roxithromycin, ciprofloxacin et al.) in effluent water. Therefore, this work provides a facile photosensitized strategy for developing guest-host photocatalysts, which enabling the simultaneous antibiotics removal and effectively reduce the ecological risks in wastewater.

Self-Immolative Polythiophene for Sunlight Inactivation of Harmful Cyanobacteria

Harmful cyanobacterial blooms and the released microcystins (MCs) caused serious environmental and public health concerns to drinking water safety. Photo-oxidation is an appealing treatment option and alternative to conventional flocculation and microbial antagonists, but the performances of current photosensitizers (either inorganic or organic) are unsatisfactory. Here, a polythiophene photosensitizer (PT10) with both high yield of reactive oxygen species (ROS) production (mainly ¹O₂, Φ_Δ = 0.51, > 8 h continuous generation) and moderate photostability was used as a powerful algaecide to inhibit Microcystis aeruginosa. Due to the positive charge of PT10, the algal cells were quickly flocculated, followed by efficient inactivation in 4 h under white light irradiation (96.7%, 10 mW/cm²). Meanwhile, PT10 was self-immolated in about 6 h. Upon biosafety evaluation with adult zebrafish, the low toxicity of PT10 and the degradation products of PT10 and algae (early logarithmic growth stage) were confirmed. In addition, microcystin-LR (MC-LR), a toxic microcystin that will be released during the destruction of the algal cells, was also degraded. Therefore, PT10-based photoinactivation of M. aeruginosa featured both high performance and low secondary pollution. In real-world aquatic systems, PT10 was confirmed to be capable of sunlight-assisted inactivation of M. aeruginosa and prevent algal blooms, thus making it appealing for environmental remediation.

Inactivation of algae by visible-light-driven modified photocatalysts: A review

Harmful algal blooms have raised great concerns due to their adverse effects on aquatic ecosystems and human health. Recently, visible light-driven (VLD) photocatalysis has attracted attention for algae inactivation owing to its unique characteristics of low cost, mechanical stability, and excellent removal efficiency. However, the low utilization of visible light and the high complexation rate of electron-hole (e^--h⁺) pairs are essential drawbacks of conventional photocatalysts. Scientific efforts have been devoted to modifying VLD photocatalysts to enhance their antialgal activity. This review concisely summarizes the anti-algae performance of the latest modified VLD photocatalysts. The summary of the mechanisms in VLD photocatalytic inactivation demonstrates that reactive oxygen species (ROS) can induce oxidative damage to algal cells and photocatalytic degradation of released organic matter. In addition, the factors, such as photocatalyst dosage, algal concentration and species, and the physicochemical properties of different water matrices, such as pH, natural organic matter, and inorganic ions, affecting the efficacy of VLD catalytic oxidation for algae removal are briefly outlined. Thereafter, this review compiles perspectives on the emerging field of VLD photocatalytic inactivation.

Photocatalytic degradation effect and mechanism of Karenia mikimotoi by non-noble metal modified TiO2 loading onto copper metal organic framework (SNP-TiO2@Cu-MOF) under visible light

In this study, the SNP-TiO₂@Cu-MOF composite was prepared successfully by loading non-noble metal modified TiO₂ (SNP-TiO₂) on the surface of copper metal organic skeleton (Cu-MOF), and compared the inactivation efficiency of different photocatalysts to Karenia mikimotoi (K. mikimotoi) under visible light. The obtained photocatalyst had the characteristic crystal faces of Cu-MOF and SNP- TiO₂, and contained functional groups such as Cu-O, -COOH, N-O, P-O, etc., which indicated the structural stability of the photocatalyst. The band gap of SNP-TiO₂@Cu-MOF composite was 2.82 eV, and it had great light absorption ability in visible light region. It was proved to be a mesoporous adsorption material, which had a huge specific surface area (245 m²/g). Compared with other photocatalysts, SNP-TiO₂@Cu-MOF composite showed the strongest photocatalytic activity. When the concentration of composite material was set to 100 mg/L and the exposure time was 6 h, the visible light photocatalytic inactivation efficiency of K. mikimotoi was 93.75 %. By measuring various metabolic indexes of K. mikimotoi under the action of different photocatalysts for 1 h, it was confirmed that cell inactivation was due to the increased membrane permeability and degradation of photosynthetic pigments and main life proteins. This research showed that SNP-TiO₂@Cu-MOF composite material was full of great potential and application prospect in controlling the outbreak of eutrophication.

A comprehensive review on the photocatalytic inactivation of Microcystis aeruginosa: Performance, development, and mechanisms

Harmful algae blooms (HABs), caused by severe eutrophication and extreme weather, have spread all over the world, posing adverse effects on eco-environment and human health. Microcystis aeruginosa is the dominant harmful cyanobacterial species when HABs occur, and the toxic metabolites produced by it, microcystins, are even fatal to humans. Photocatalytic technology has received wide attention from researchers for its clean and energy-efficient features, while the basic mechanisms and modification methods of photocatalysts have also been widely reported. In recent years, photocatalytic technology has shown great promise in the inhibition of HABs. In this article, we systematically reviewed the progress in photocatalytic performance and algae removal efficiency, discuss the damage mechanisms of photocatalysts for algae removal, including physical damage and various oxidative stresses, and also explore the degradation rates and possible pathways of microcystins. It can be concluded that during the photocatalytic process, the cytoarchitectural integrity of algae cells was damaged, a variety of important protein and enzyme systems were disrupted, and the antioxidant systems collapsed due to the continuous attack of ROS, which adversely affected the normal physiological activities and growth, resulting in the inactivation of algae cells. Moreover, photocatalysts have a degrading effect on microcystins, thus reducing the adverse effects of HAB. Finally, a brief summary of future research priorities regarding the photocatalytic degradation of algae cells is presented. This study helps to enhance the understanding of the destruction mechanism of Microcystis aeruginosa during the photocatalytic process, and provides a reference for the photodegradation of HAB in water bodies.

Hydrogen peroxide modified and bismuth vanadate decorated titanium dioxide nanocomposite (BiVO4@HMT) for enhanced visible light photocatalytic growth inhibition of harmful cyanobacteria in water

The persistence of harmful cyanobacterial algal blooms in aquatic ecosystems leads to health damage for various life forms. In this study, a photocatalyst active in the visible light range was prepared by combining BiVO₄ with hydrogen peroxide modified titanium dioxide (BiVO₄@HMT; for short), using an impregnation method. The catalyst was used to photocatalytically inhibit the growth of cyanobacteria collected from a bloom site. To infer the optimum pH for cyanobacterial growth, the effect of pH was studied. The growth of cyanobacteria was favoured in an alkaline environment at pH values in the range of 8-9.5 when analysed on the 20^th day of incubation. Structural and chemical analysis of pristine and composite nano-powders was performed using XRD, SEM, TEM and XPS, confirming the heterojunction formation, while optical and band gap analysis revealed increased visible light absorption and reduced band gap of the composite. A small strawberry seed-like assembly of BiVO₄ particles increased the light absorption in the 15%BiVO₄@HMT composite and increased the inhibition efficiency up to 2.56 times compared to pristine HMT at an exposure time of 6 h and cell concentration at 0.1 g L^-1 with an optimum catalyst dose of 1 g L^-1. The amount of chlorophyll 'a' decreased due to the generation of catalytically reactive species, especially holes (h⁺), which caused oxidative damage to the cell wall, cell membrane and antioxidants in algal cells. This study reports that visible light active nanocatalysts can be used as a promising method for reducing algal blooms in water bodies.

Removal of harmful algae in natural water by semiconductor photocatalysis- A critical review

Harmful Algal Blooms (HABs) have turned out to be a global occurrence owing to the detrimental phenomenon like eutrophication and global climate change caused by human activities. This newly emergent threat imposes a severe hazardous to public health, ecosystems and fishery-based economies. Rapid and exponential growth of certain delirious and toxic algal species shall be held causative to the formation of HABs. The potential disadvantages they pose, make it necessary the identification of efficient treatment methodologies. Photocatalysis has been identified as the most promising solution amongst all the identified and investigated methods, for the environmental and economic benefits beheld. Different treatment methodologies were evaluated and light has been thrown on the advantages beheld by photocatalysis over the other methods. Focus has been given to the different photocatalysts that have been so far put to use towards photocatalytic disinfection of HABs and algal toxins. This present study provides useful information on the application of the traditional and photocatalysis process for removal of HABs in water bodies. Moreover, the results revealed that photocatalysis method could cause potent inhibitory effect on growth of algae species and disrupted algal cells membranes to some extent. Finally, the conventional treatment techniques have been recognized to be insufficient for removal of HABs. However, the photocatalyst technology have been utilized mostly for the mineralization and neutralization of the algal pollutants without any harmful secondary pollutants.

Research progress of photocatalysis for algae killing and inhibition: a review

The healthy development of biodiversity has been threatened frequent water eutrophication. In recent years, photocatalytic technology, which has attracted researchers' attention, not only showed increasing potential in the field of organic pollutant degradation, but also many kinds of photocatalysts were used in the field of red tide pollution control at present, which showed superior ability to inactivate harmful algae and degrade algal toxins. Researches have also explored the mechanisms of photocatalytic algae inhibition. In this study, the current research progress in the field of photocatalytic algae inhibition was systematically discussed from several aspects, such as common types of photocatalysts, modification methods of photocatalysts, types of tested algae for photocatalytic algae inhibition, and action mechanism of inactivated algae cells, so as to provide a certain theoretical basis for further application research of photocatalysts in the field of algae removal in the later period.

The effect of graphene photocatalysis on microbial communities in Lake Xingyun, southwestern China

Graphene photocatalysis is a new method for harmful algae and water pollution control. However, microbial communities undergoing graphene photocatalysis treatment in freshwater lakes have been poorly studied. Here, using 16S rRNA and 18S rRNA gene high-throughput sequencing, the responses of microbial communities to graphene photocatalysis were analyzed in the eutrophic lake, Lake Xinyun, southwestern China. For microeukaryotes, we found that Arthropoda was dominant in summer, while its abundant level declined in spring under natural conditions. The evident reduction of Arthropods was observed after graphene photocatalysis treatment in summer and then reached a relatively stable level. For bacteria, Cyanobacteria decreased in summer due to the graphene photocatalysis-mediated inactivation. However, Cyanobacteria was higher in the treated group in spring with a genera group-shift. Functional analysis revealed that microeukaryotes showed higher potential for fatty acid oxidation and TCA cycle in the treated group in summer, but they were more abundant in control in spring. Pathways of starch and sucrose metabolism and galactose metabolism were more abundant in control in summer, while they were enriched in the treated group in spring for bacteria. This study offers insights into the effects of graphene photocatalysis on microbial communities and their functional potential in eutrophic lake.

Rapid degradation of Congo red wastewater by Rhodopseudomonas palustris intimately coupled carbon nanotube - Silver modified titanium dioxide photocatalytic composite with sodium alginate

With a large number of Congo red used in textiles, Congo red wastewater was not easily degraded, resulting in environmental and health-related problems. In order to improve the degradation efficiency of Congo red wastewater, A novel intimately coupled photocatalysis and biodegradation (ICPB) system was prepared by coupling Rhodopseudomonas palustris (R. Palustris), carbon nanotube - silver modified titanium dioxide photocatalytic composite (CNT-Ag -TiO₂, CAT) and sodium alginate (SA) (R. palustris/CAT@SA). Compared with immobilized CAT and R. palustris, the R. palustris/CAT@SA improved the degradation and removal rates of Congo red by 14.3% and 42.1%, and the COD removal rates by 76% and 44.6%, respectively. The mechanism of the degradation of Congo red by the new ICPB was that the Congo red on the surface of the support was degraded into long-chain alkanes by the superoxide and hydroxyl radicals of CAT product, and then the long-chain alkanes were completely mineralization by R. Palustris, which reduced the accumulation of intermediates in the photocatalysis. Most of the Congo red was adsorbed to the interior of the carrier was degraded into aromatic hydrocarbons by R. Palustris, and then oxidized and degraded by CAT, and a small part of the Congo red would be directly mineralized by R. Palustris. A novel technical solution of R. palustris/CAT@SA provided a potential application to the degradation of dye wastewater.

Activation of peroxymonosulfate by a floating oxygen vacancies - CuFe2O4 photocatalyst under visible light for efficient degradation of sulfamethazine

In this study, expanded perlite supported oxygen vacancies-CuFe₂O₄ (OVs-CFEp) was synthesized via a simple method and utilized as floating catalyst to activate peroxymonosulfate (PMS) for the removal of sulfamethazine (SMT) under visible light irradiation. OVs-CFEp/Vis/PMS synergy presents much superior performance than that of OVs-CFEp/Vis system and OVs-CFEp/PMS system. PMS was efficiently activated by OVs-CFEp at a wide range of pH values, while the degrading rate of SMT was up to 95% in OVs-CFEp/Vis/PMS system. Oxygen vacancies and ·O₂^- accelerated the conversion of Fe(III)/Fe(II) and Cu(I)/Cu(II). The combination of the floating loader boosted light absorption capacity and sufficiently prevented metal ions leaching, which was all beneficial to enhance catalytic performance and recyclability. Besides, the reactive oxygen species were investigated systematically, proving that visible light and OVs-CFEp could activate PMS to produce ·SO₄^-, ·OH, O₂·^-, and ¹O₂ reactive species. Furthermore, based on intermediates identification and Density Functional Theory (DFT) calculation, three types and seven main degradation pathways involving cleavage of bond, SMT molecular rearrangement, and hydroxylation reaction were proposed. So this high photo-absorbing catalyst coupling with advanced oxidation progress was promising for extensive environmental remediation.

Cercosporin-bioinspired photoinactivation of harmful cyanobacteria under natural sunlight via bifunctional mechanisms

Harmful cyanobacterial blooms (HCBs), mainly caused by eutrophication, have deleterious impacts on water resources and pose a great threat to human health and natural ecosystems. Thus, an environmentally-friendly method to inhibit HCBs is urgently needed. Learning from nature, herein, natural product cercosporin, produced by the fungi Cercospora to damage plant cells under natural sunlight, was developed as a powerful photosensitive algicidal reagent to inhibit HCBs. Microcystis aeruginosa could be severely inactivated by 20 μM cercosporin in 36 h with 95% inhibition ratio under 23 W compact fluorescent light irradiation. Further mechanism investigation showed that algal cell walls and membranes along with the antioxidant and photosynthetic systems were damaged via two mechanisms, those being, reactive oxygen species generation and cell adsorption. More importantly, the practical applicability of cercosporin was demonstrated by its effectiveness in a 2 L-scale photoinactivation experiment using cyanobacterial blooms from Taihu Lake, China under natural sunlight with a lower dosage of cercosporin (7.5 μM). This study established the bifunctional mechanisms by which cercosporin inactivates HCBs, opening design possibilities for the development of novel photosensitive algicidal reagents to control HCBs.

The inactivation effects and mechanisms of Karenia mikimotoi by non-metallic elements modified TiO2 (SNP-TiO2) under visible light

As an advanced oxidation technology, photocatalytic treatment of red tide algae pollution was potential of great research prospects. However, the most commonly used photocatalyst TiO₂ can only use ultraviolet light with short wavelength because of its wide band gap. In this study, the non-metallic elements S, N and P were added into the TiO₂ (SNP-TiO₂) lattice by hydrothermal synthesis, and the inactivation effects and mechanisms of Karenia mikimotoi were studied under visible light. The particle size of the obtained photocatalyst was about 10 nm. There were obvious characteristic peaks at the (101) (004) (200) (105) (211) (204) interface and included NO bond, PO bond and SO bond. The incorporation of S, N and P reduced the band gap of TiO₂ from 3.2 eV to 3.08 eV, which showed the integrity of the doping process. S_0.7N_1.4P_0.05-TiO₂ was full of excellent photocatalytic activity, the continuous inhibition effect was the most obvious. When exposed to 200 mg/L for 96 h, the growth inhibition rate (IR) was 81.8%. Photocatalytic process led to membrane damage of algal cells and collapse of photosynthetic system, caused oxidative stress response and accelerated algal cell inactivation. The study indicated that non-metallic elements modified TiO₂ (SNP-TiO₂) was full of potential of in treating red tide outbreak pollution under visible light.

Enhanced visible light photo-Fenton-like degradation of tetracyclines by expanded perlite supported FeMo3Ox/g-C3N4 floating Z-scheme catalyst

In the conventional Fenton system, the relatively low efficiency of Fe (II) regeneration is a significant drawback. To address this shortcoming, a novel floating Z-scheme photo-Fenton catalyst FeMo₃O_x/g-C₃N₄/EP was prepared by a facile dip-calcination method, in which iron and molybdenum oxides with mixed valence states (FeMo₃O_x) and graphitic carbon nitride (g-C₃N₄) were loaded on the expanded perlite. The removal efficiencies reached the maximum at 98.0%, 93.1% and 97.1% for tetracycline, oxytetracycline and chlortetracycline, respectively, after 60 min dark adsorption and 60 min photo-Fenton process. The aid of dual ion (Fe and Mo) synergy system and photoreduction by Z-scheme photocatalyst enhanced the Fe (II) regeneration, resulting in the excellent performance. Radical scavenger experiment, electron spin resonance spectra (ESR) and X-ray photoelectron spectra (XPS) were used to confirm the mechanism of free radicals' formation and Fe/Mo redox cycling. ·OH, ·O₂^- and ¹O₂ played important roles in the pollutant's degradation, while the generation of ·O₂^- was enhanced due to the floatability in this system. The possible degradation pathways of TC were put forward according to the results of mass spectrum and Orbital-Weighted Fukui Function. Overall, this work provides new insights on the cooperation between iron-based mix oxides and semiconductor in the photo-Fenton system.

Polythiophene for Near Full pH Photo-antimicrobial

Microbial infections are currently one of the world’s major public health cares, the evolution of which has resulted in the development of multiple tolerances (not just the drug or antibiotic...

Bifunctional PDDA-stabilized β-Fe2O3 nanoclusters for improved photoelectrocatalytic and magnetic field enhanced photocatalytic applications

Bifunctional β-Fe2O3@PDDA nanoclusters applied for the efficient photoelectrocatalytic oxygen evolution reaction and magnetic field enhanced photocatalytic degradation of pollutants.

Self-floating photocatalytic hydrogel for efficient removal of Microcystis aeruginosa and degradation of microcystins-LR

Cyanobacterial harmful algal blooms (CyanoHABs) and the release of cyanotoxins have posed adverse impacts to aquatic system and human health. In this study, a novel self-floating Ag/AgCl@LaFeO₃ (ALFO) photocatalytic hydrogel was prepared via freeze-thaw method for removal of Microcystis aeruginosa (M. aeruginosa). The ALFO hydrogel performed an excellent photocatalytic activity with a 99.4% removal efficiency of chlorophyll a within 4 h. It can still remove above 95% chlorophyll a after six consecutive recycles. Besides it has also shown excellent mechanical strength and elasticity, which can ensure its use in practical applications. The mechanisms of M. aeruginosa inactivation are attributed to •O₂^- and •OH generated by the ALFO hydrogel under visible light radiation. In addition, •O₂^- and •OH can further oxidative degrade and even mineralize the leaked algae organic matter, avoiding the recurrence of CyanoHABs. What's more, the ALFO hydrogel owns good photocatalytic degradation performance for microcystins-LR (MC-LR) with a 97% removal efficiency within 90 min. A possible photocatalytic degradation pathway of MC-LR was proposed through the identification of the intermediate products during the photocatalytic reaction, which confirmed the reduction of MC-LR toxicity. This work develops recyclable a self-floating ALFO hydrogel to simultaneously inactivate M. aeruginosa and degrade MC-LR, providing a prospective method for governing and controlling CyanoHABs in practical application.

Comparison of UV-A photolytic and UV/TiO2 photocatalytic effects on Microcystis aeruginosa PCC7813 and four microcystin analogues: A pilot scale study

To date, the high cost of supplying UV irradiation has prevented the widespread application of UV photolysis and titanium dioxide based photocatalysis in removing undesirable organics in the water treatment sector. To overcome this problem, the use of UV-LEDs (365 nm) for photolysis and heterogeneous photocatalysis applying TiO₂ coated glass beads under UV-LED illumination (365 nm) in a pilot scale reactor for the elimination of Microcystis aeruginosa PCC7813 and four microcystin analogues (MC-LR, -LY, -LW, -LF) with a view to deployment in drinking water reservoirs was investigated. UV-A (365 nm) photolysis was shown to be more effective than the UV/TiO₂ photocatalytic system for the removal of Microcystis aeruginosa cells and microcystins. During photolysis, cell density significantly decreased over 5 days from an initial concentration of 5.8 × 10⁶ cells mL^-1 until few cells were left. Both intra- and extracellular microcystin concentrations were significantly reduced by 100 and 92 %, respectively, by day 5 of the UV treatment for all microcystin analogues. During UV/TiO₂ treatment, there was great variability between replicates, making prediction of the effect on cyanobacterial cell and toxin behavior difficult.

Efficient elimination of the pollutants in eutrophicated water with carbon strengthened expanded graphite based photocatalysts: Unveiling the synergistic role of metal sites

Metal sites (Ni, Bi or Ag) were introduced into carbon strengthened expanded graphite (CEG) based photocatalysts, and performed as a novel strategy to enhance the elimination of Microcystis aeruginosa and microcystin-LR from water. Results show that metal doping can efficiently improve the adsorption of harmful algae and enhance the photocatalytic activities in inactivation of harmful algae and degradation of MC-LR. Among the CEG catalysts, Ni-CEG can achieve the highest removal rate up to 90.6% for algal cells with 5 h visible light irradiation, while Bi-CEG catalyst provides the best performance for MC-LR degradation with the removal rate of 80.9% in 6 h visible light irradiation. In general, considering the coexistence of algal cells and microcystin-LR, Bi-CEG is proved to be an excellent candidate for the remediation of eutrophicated waters since it can achieve the efficient removal of both harmful algae and MC-LR. DFT calculations indicate that metal doping can transform the photocatalysts into n-type semiconductor, and provide the mid-gap state. In addition, the partial charge density distribution near Fermi level was mainly composed by the metal dopants, which can enhance the interaction with harmful algae and MC-LR.

Visible light photocatalytic bismuth oxide coatings are effective at suppressing aquatic cyanobacteria and degrading free-floating genomic DNA

Access to safe drinking water free from microbial pollution is an issue of global concern. The use of photocatalytic thin films in water treatment has focused on titanium dioxide, which requires UV-activation, proving a potential barrier to upscaling and implementation in the real world. Visible-light-activated photocatalytic thin films, such as bismuth oxide, have recently been shown to have antimicrobial properties. However, more understanding of the photocatalytic effect on the microbial population in water is required. Glass beads coated with bismuth oxide were incubated with either Microcystis aeruginosa, Anabaena sp. or free-floating genomic DNA. The presence of bismuth oxide-coated glass beads was able to rapidly stop a population of cyanobacteria from increasing. The coated beads were also able to degrade genomic DNA. Leachate from the beads showed no increase in toxicity against human liver cells. This data demonstrates the efficacy of bismuth oxide-coated glass beads for controlling potentially dangerous cyanobacterial populations, whilst potentially reducing the amount of free-floating genomic DNA (an essential issue in the face of antimicrobial resistance) - all of which should be essential considerations in emerging water treatment technologies.

Anti-algal activity of a fluorine-doped titanium oxide photocatalyst against Microcystis aeruginosa and its photocatalytic degradation

Fluorine-doped TiO2 was successfully synthesised and applied as algaecide. Studies on algae removal efficiencies and mechanisms illustrated that F-TiO2 was suitable for algae elimination in natural water bodies.

Effective inactivation of Microcystis aeruginosa by a novel Z-scheme composite photocatalyst under visible light irradiation

Microcystis aeruginosa is one of the most famous harmful algae. In this work, Z-scheme g-C₃N₄-MoO₃ (Mo-CN) composite photocatalysts were successfully synthesized to alleviate the algae pollution. The obtained composites exhibited excellent performance for the inactivation of M. aeruginosa. The optimal photocatalysts (15Mo-CN) achieved a removal efficiency of 97% for the algal cells after 3 h visible light irradiation, which was attributed to their remarkable surface properties and ingenious structure design. The physiological status of Microcystis aeruginosa were evaluated by the chlorophyll a (chla), relative electron transport rate (rETR) and maximum photochemical efficiency (Fv/Fm), and all of them decreased in different degrees. Furthermore, the as-prepared photocatalysts also show a certain activity for the removal of leaked macromolecule organic compounds during the process of algal cells inactivation. Finally, a possible mechanism on the photocatalytic inactivation of algal cells by the Z-scheme photocatalysts was deduced based on the experimental and characterization results. We believe this study would provide new insights into the development of promising technology and basic theory for remediation of algae pollution.

Photocatalytic degradation of microcystin-LR by modified TiO2 photocatalysis: A review

Microcystin-LR (MC-LR), the most toxic and commonly encountered cyanotoxin, is produced by harmful cyanobacterial blooms and potentially threatens human and ecosystems health. Titanium dioxide (TiO₂) photocatalysis is attracting growing attention and has been considered as an efficient, environmentally friendly and promising solution to eliminate MC-LR in the aquatic ecosystems. Over recent decades, scientific efforts have been directed towards the understanding of fundamentals, modification strategies, and application potentials of TiO₂ photocatalysis in degrading MC-LR. In this article, recent reports have been reviewed and progress has been summarized in the development of heterogeneous TiO₂-based photocatalysts for MC-LR photodegradation under visible, UV, or solar light. The proposed photocatalytic principles of TiO₂ and destruction of MC-LR have been thoroughly discussed. Specifically, some main modification methods for improving the drawbacks and performance of TiO₂ nanoparticle were highlighted, including element doping, semiconductor coupling, immobilization, floatability amelioration and magnetic separation. Moreover, the performance evaluation metrics quantum yield (QY) and figure of merit (FOM) were used to compare different photocatalysts in MC-LR degradation. The best performance was seen in N-TiO₂ with QY and FOM values of 2.20E-07 molecules/photon and 1.00E-11 mol·L/(g·J·h). N-TiO₂ or N-TiO₂-based materials may be excellent options for photocatalyst design in terms of MC-LR degradation. Finally, a summary of the remaining challenges and perspectives on new tendencies in this exciting frontier and still an emerging area of research were addressed accordingly. Overall, the present review will offer a deep insight for understanding the photodegradation of MC-LR with modified TiO₂ to further inspire researchers that work in associated fields.

Simultaneous removal of harmful algal cells and toxins by a Ag2CO3-N:GO photocatalyst coating under visible light

The frequent harmful algae blooms (HABs) in eutrophic waters pose serious threats to the water environment and health of human beings and animals. In this study, a new type of photocatalytic coating was prepared by loading Ag₂CO₃-N:GO (AGON) on the polyurethane sponge modified by silica sol via a dip coating method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) and degradation of Microcystin-LR (MC-LR). The factors including photocatalyst loading dosage, natural organic matter (NOM), and alkalinity were studied. The effects on the physiological characteristics of M. aeruginosa and reactive oxygen species (ROS) were also investigated to reveal the photocatalytic inactivation mechanisms. The results showed that the AGON coating-4 (the initial concentration of AGON suspension used for loading is 4 g/L) exhibited the optimum photocatalytic performance under visible light, which can completely remove chlorophyll a after 5 h of irradiation. And the NOM and alkalinity in water have relatively negative effects on the photocatalytic inactivation of algae. The prepared AGON coating also exhibited excellent photocatalytic performance in the degradation of MC-LR under visible light. It only needed 20, 60 and 120 min to completely degrade 0.1, 0.3 and 0.5 mg/L MC-LR, respectively. However, the mixed systems of algae and MC-LR required a longer time to achieve photocatalytic degradation. The O₂^- were the predominant reactive oxygen species, causing the damage of cell membranes and walls and the leakage of cellular content, which eventually led to the irreversible damage to algal cells. What's more, the coating can be reused several times due to its good cyclability and stability. Therefore, the AGON coating has promising prospects for the treatment of algal blooms in eutrophic waters.

Transparent floatable magnetic alginate sphere used as photocatalysts carrier for improving photocatalytic efficiency and recycling convenience

Practical application of powder photocatalysts is far from satisfying due to their low photon utilization, inconvenient recovery and potential environmental risk. In this study, an easily recoverable, environmentally friendly and highly transparent floatable magnetic photocatalyst carrier was prepared based on biopolymer alginate and Fe₃O₄ particles. Further, three different types of photocatalysts were chosen as model semiconductor photocatalysts and loaded on the shell of the carriers. The freeze process facilitated the formation of internal cavities that enhanced floating ability and transparency of the spheres. Meanwhile, the excellent floating performance offered massive reaction sites for pollutants reacting with photocatalysts, O₂ and photons on the air/water interface. Photodegradation results showed all three floatable hybrid photocatalysts exhibited enhanced photocatalytic efficiencies compared to the virgin photocatalysts. In short, the carrier can integrate excellent floating ability, environmental friendliness and full recycling with good stability, and it can greatly improve the photocatalytic efficiency of various powder semiconductor photocatalysts.

An approach to the photocatalytic mechanism in the TiO2-nanomaterials microorganism interface for the control of infectious processes

The approach of this timely review considers the current literature that is focused on the interface nanostructure/cell-wall microorganism to understand the annihilation mechanism. Morphological studies use optical and electronic microscopes to determine the physical damage on the cell-wall and the possible cell lysis that confirms the viability and microorganism death. The key parameters of the tailoring the surface of the photoactive nanostructures such as the metal functionalization with bacteriostatic properties, hydrophilicity, textural porosity, morphology and the formation of heterojunction systems, can achieve the effective eradication of the microorganisms under natural conditions, ranging from practical to applications in environment, agriculture, and so on. However, to our knowledge, a comprehensive review of the microorganism/nanomaterial interface approach has rarely been conducted. The final remarks point the ideal photocatalytic way for the effective prevention/eradication of microorganisms, considering the resistance that the microorganism could develop without the appropriate regulatory aspects for human and ecosystem safety.

One-Step Synthesis of b-N-TiO2/C Nanocomposites with High Visible Light Photocatalytic Activity to Degrade Microcystis aeruginosa

Black TiO2 with doped nitrogen and modified carbon (b-N-TiO2/C) were successfully prepared by sol-gel method in the presence of urea as a source of nitrogen and carbon. The photocatalysts were characterized by field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman, electron paramagnetic resonance (EPR), and UV-vis diffuse reflectance spectra (DRS). The doped nitrogen, introduced defects, and modified carbon played a synergistic role in enhancing photocatalytic activity of b-N-TiO2/C for the degradation of chlorophyll-a in algae cells. The sample, with a proper amount of phase composition and oxygen vacancies, showed the highest efficiency to degrade chlorophyll-a, and the addition of H2O2 promoted this photocatalysis degradation. Based on the trapping experiments and electron spin resonance (ESR) signals, a photocatalytic mechanism of b-N-TiO2/C was proposed. In the photocatalytic degradation of chlorophyll-a, the major reactive species were identified as OH and O2−. This research may provide new insights into the photocatalytic inactivation of algae cells by composite photocatalysts.

Preparation of a thiols β-cyclodextrin/gold nanoparticles-coated open tubular column for capillary electrochromatography enantioseparations

Inspired by the distinct chemical and physical properties of nanoparticles, here a novel open-tubular capillary electrochromatography column was prepared by electrostatic assembly of poly(diallydimethylammonium chloride) onto the inner surface of a fused-silica capillary, followed by self-adsorption of negatively charged SH-β-cyclodextrin/gold nanoparticles. The formation of the SH-β-cyclodextrin/gold nanoparticles coated capillary was confirmed and characterized by scanning electron microscopy and energy dispersive spectrometry. The results of scanning electron microscopy and energy dispersive spectrometry studies indicated that SH-β-cyclodextrin/gold nanoparticles were successfully coated on the inner wall of the capillary column. The performance of the SH-β-cyclodextrin/gold nanoparticles coated capillary was validated by the analysis of six pairs of chiral drugs, namely zopiclone, carvedilol, salbutamol, terbutaline sulfate, phenoxybenzamine hydrochloride, and ibuprofen. Satisfactory enantioseparation results were achieved, confirming the use of gold nanoparticles as the support could enhance the phase ratio of the open-tubular capillary column. Additionally, the stability and reproducibility of the SH-β-cyclodextrin/gold nanoparticles coated capillary column were also investigated. Then, this proposed method was well validated with good linearity (≥0.999), recovery (90.0-93.5%) and repeatability, and was successfully used for enantioseparation of ibuprofen in spiked plasma samples, which indicated the new column's potential usage in biological analysis.

Anti-algal activity of Fe2O3-TiO2 photocatalyst on Chlorella vulgaris species under visible light irradiation

Many industries located in coastal areas use a large amount of seawater. Algal biofouling can be a major problem that hinders the efficiency of these industrial facilities. In most cases, seawater requires algal removal pre-treatment to avoid or mitigate biofilm formation. To remediate green microalgae, Fe₂O₃-TiO₂ nanoparticles with 2.5% w/w Fe₂O₃ were applied as a visible light driven photocatalyst. The anti-algal activity of the photocatalytic pre-treatment using green microalgae, Chlorella vulgaris was tested. The experiments were carried out in freshwater, artificial seawater, and real seawater. Effect of photocatalyst dosage, visible light intensity, and water salinity on the removal of microalgae was investigated. The highest inactivation efficiency of Chlorella vulgaris was achieved under 55 W/m² visible light irradiation when 0.25 g/L of Fe₂O₃-TiO₂ photocatalyst was used. The photocatalytic removal kinetics of Chlorella vulgaris followed the pseudo first order Langmuir-Hinshelwood model. The results revealed that the efficiency of photocatalytic removal of algae decreased with increasing of seawater salinity. The anti-algal activity of Fe₂O₃-TiO₂ nanoparticles was attributed to the generation of reactive oxygen species (ROS) through the photocatalytic process. H⁺ radical was shown to be the most important ROS that nanoparticles produced in the aqueous media. Using Fe₂O₃-TiO₂ nanoparticles in photocatalytic pre-treatment could be an efficient environmental-friendly method for micro-algal remediation in seawater under visible light.

Adsorption of gallic acid on nanoclay modified with poly(diallyldimethylammonium chloride)

In this work, particles of nanoclay modified with poly(diallyldimethylammonium), PDDA, namely PDDA/PGV, were obtained and characterized by infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), surface area measurement (BET surface area), measurement of zero charge point (pH_PCZ), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS). The PDDA/PGV particles were applied as adsorbent for the removal of gallic acid (GA) from aqueous solution. The effect of various parameters, such as solution pH, contact time, adsorbent mass, and temperature, was studied. The maximum adsorption capacity of PDDA/PGV (238.45 mg g^-1) was observed at pH 4 and 15 °C. The study of adsorption kinetics and isotherms revealed that the adsorption process was better fitted by pseudo-first order and Freundlich model, respectively. The obtained thermodynamic parameters indicate that the adsorption of GA is spontaneous and enthalpy-driven.

In-situ active formation of carbides coated with NPTiO2 nanoparticles for efficient adsorption-photocatalytic inactivation of harmful algae in eutrophic water

Harmful algae pollution in eutrophic waters represents one of the most serious problems in natural water environment. Adsorption assisted photocatalytic inactivation is often considered as a promising method to achieve the clean-up of harmful algae and the remediation of eutrophic water. Here, we synthesize the NPTiO₂ (nitrogen and phosphorous doped TiO₂)/C composites using a facile sol-gel method, and demonstrate successful achievement of efficient adsorption-photocatalytic performance via the in-situ formed carbides coated with NPTiO₂ nanoparticles. We find that the composites have rough surfaces with porous structure, which can be tuned by the calcination temperature, and that such composites can be served to efficiently capture the algal cells. The N and P are successfully doped into the TiO₂ crystal lattices, and the cooperation of carbides and NPTiO₂ particles enhances significantly light absorption, while inhibiting the recombination of the photogenerated charge carriers. Among all the NPTiO₂/C composites, the NPTiO₂/C system calcinated at 550 °C shows the best photocatalytic performance for the algal inactivation, presenting a removal rate of 92.6% following 6 h visible light irradiation. The destruction of cell structures is clearly observed in the photocatalytic process. Interestingly, the metabolic activities are also disturbed by the photogenerated radicals, which accelerates the death of algal cells. Moreover, the NPTiO₂/C composite can effectively remove the cytotoxins from water, rendering the composite and the doping strategy promising in the remediation practice for eutrophic waters.