Surface properties of activated sludge-derived biochar determine the facilitating effects on Geobacter co-cultures

Geobatteries in environmental biogeochemistry: Electron transfer and utilization

The efficiency of direct electron flow from electron donors to electron acceptors in redox reactions is significantly influenced by the spatial separation of these components. Geobatteries, a class of redox-active substances naturally present in soil-water systems, act as electron reservoirs, reversibly donating, storing, and accepting electrons. This capability allows the temporal and spatial decoupling of redox half-reactions, providing a flexible electron transfer mechanism. In this review, we systematically examine the critical role of geobatteries in influencing electron transfer and utilization in environmental biogeochemical processes. Typical redox-active centers within geobatteries, such as quinone-like moieties, nitrogen- and sulfur-containing groups, and variable-valent metals, possess the potential to repeatedly charge and discharge. Various characterization techniques, ranging from qualitative methods like elemental analysis, imaging, and spectroscopy, to quantitative techniques such as chemical, spectroscopic, and electrochemical methods, have been developed to evaluate this reversible electron transfer capacity. Additionally, current research on the ecological and environmental significance of geobatteries extends beyond natural soil-water systems (e.g., soil carbon cycle) to engineered systems such as water treatment (e.g., nitrogen removal) and waste management (e.g., anaerobic digestion). Despite these advancements, challenges such as the complexity of environmental systems, difficulties in accurately quantifying electron exchange capacity, and scaling-up issues must be addressed to fully unlock their potential. This review underscores both the promise and challenges associated with geobatteries in responding to environmental issues, such as climate change and pollutant transformation.

AQDS-functionalized biochar enhances the bioreduction of Cr(VI) by Shewanella putrefaciens CN32

The bioreduction of toxic chromium(VI) to sparingly soluble chromium(III) represents an environmentally friendly and cost-effective method for remediating Cr contamination. Usually, this bioreduction process is slow and requires the addition of quinone compounds as electron shuttles to enhance the reaction rate. However, the dissolved quinone compounds are susceptible to loss with water flow, thereby limiting their effectiveness. To address this challenge, this study loaded anthraquinone-2,6-disulfonate (AQDS), a typical quinone compound, onto biochar (BC) to create a novel solid-phase electron mediator (BC-AQDS) that can sustainably promote Cr(VI) bioreduction. The experimental results demonstrated that BC-AQDS significantly promoted the bioreduction of Cr(VI), where the reaction rate constant increased by 4.81 times, and the reduction extent increased by 38.31%. X-ray photoelectron spectroscopy and Fourier-Transform Infrared Spectroscopy analysis revealed that AQDS replaced the -OH functional groups on the BC surface to form BC-AQDS. Upon receiving electrons from Shewanella putrefaciens CN32, BC-AQDS was reduced to BC-AH2DS, which subsequently facilitated the reduction of Cr(VI) to Cr(III). This redox cycle between BC-AQDS and BC-AH2DS effectively enhanced the bioreduction rate of Cr(VI). Our study also found that a lower carbonization temperature of BC resulted in a higher surface -OH functional group content, enabling a greater load of AQDS and a more pronounced enhancement effect on the bioreduction of Cr(VI). Additionally, a smaller particle size of BC and a higher dosage of BC-AQDS further contributed to the enhancement of Cr(VI) bioreduction. The preparation of BC-AQDS in this study effectively improve the utilization of quinone compounds and offer a promising approach for enhancing the bioreduction of Cr(VI). It provides a more comprehensive reference for understanding and solving the problem of Cr pollution in groundwater.

Enhancing reductive dechlorination of trichloroethylene in bioelectrochemical systems with conductive materials

The incorporation of conductive materials to enhance electron transfer in bioelectrochemical systems (BES) is considered a promising approach. However, the specific effects and mechanisms of these materials on trichloroethylene (TCE) reductive dechlorination in BES remains are not fully understood. This study investigated the use of magnetite nanoparticles (MNP) and biochars (BC) as coatings on biocathodes for TCE reduction. Results demonstrated that the average dechlorination rates of MNP-Biocathode (122.89 μM Cl·d-1) and BC-Biocathode (102.88 μM Cl·d-1) were greatly higher than that of Biocathode (78.17 μM Cl·d-1). Based on MATLAB calculation, the dechlorination rate exhibited a more significantly increase in TCE-to-DCE step than the other dechlorination steps. Microbial community analyses revealed an increase in the relative abundance of electroactive and dechlorinating populations (e.g., Pseudomonas, Geobacter, and Desulfovibrio) in MNP-Biocathode and BC-Biocathode. Functional gene analysis via RT-qPCR showed the expression of dehalogenase (RDase) and direct electron transfer (DET) related genes was upregulated with the addition of MNP and BC. These findings suggest that conductive materials might accelerate reductive dechlorination by enhancing DET. The difference of physicochemical characteristics (e.g. particle size and specific surface area), electron transfer enhancement mechanism between MNP and BC as well as the reduction of Fe(III) by hydrogen may explain the superior dechlorination rate observed with MNP-Biocathode.

Enhancing CH4 production in microbial electrolysis cells: Optimizing electric field via carbon cathode resistivity

Microbial electrolysis cells (MECs) are increasingly recognized as a promising technology for converting CO2 to CH4, offering the dual benefits of energy recovery from organic wastewater and CO2 emission reduction. A critical aspect of this technology is the enhancement of the electron-accepting capacity of the methanogenic biocathode to improve CH4 production efficiency. This study demonstrates that adjusting the cathode resistivity is an effective way to control the electric field intensity, thereby enhancing the electron accepting capacity and CH4 production. By maintaining the electric field intensity within approximately 8.50-10.83 mV·cm-1, the CH4 yield was observed to increase by up to two-fold. The improvement in CH4 production under optimized electric field conditions was attributed to the enhancement of the direct accepting capacity of the biocathode. This enhancement was primarily due to an increase in the relative abundance of Methanosaeta by approximately 10 % and an up to 83.78 % rise in the electron-accepting capacity of the extracellular polymeric substance. These insights offer a new perspective on the operation of methanogenic biocathodes and propose a novel biocathode construction methodology based on these findings, thus contributing to the enhancement of MEC efficiency.

Enhancing methane production and interspecies electron transfer of anaerobic granular sludge by the immobilization of magnetic biochar

Supplementation of conductive materials has been proved to be a promising approach for enhancing microbial interspecies electron transfer (IET) in anaerobic digestion systems. In this study, magnetic bamboo-based biochar was prepared at temperatures of 400-800 °C via a ball milling/carbonization method, and it immobilized in mature anaerobic granular sludge (AGS) aimed to enhance methane production by improving the IET process between syntrophic microbial communities in the AGS. Results showed that the AGS with magnetic biochar immobilization demonstrated increased glucotrophic and acetotrophic methane production by 69.54-77.56 % and 39.96-54.92 %, respectively. Magnetic biochar prepared at 800 °C with a relatively higher Fe content (0.37 g/g magnetic biochar) displayed a stronger electron charge/discharge capacity (36.66 F/g), and its immobilization into AGS promoted methane production most. The conductivity of AGS increased by 52.13-87.32 % after incorporating magnetic biochar. Furthermore, the extracellular polymeric substance (EPS) of AGS showed an increased capacitance and decreased electron transfer resistance possibly due to the binding of magnetic biochar and more riboflavin secretion in EPS, which could contribute to the accelerated IET process in the inner AGS. In addition, the immobilization of magnetic biochar could promote the production of volatile fatty acids by 15.36-22.50 %. All these improvements may jointly lead to the enhanced methane production capacity of AGS. This study provided a fundamental understanding of the role of incorporated magnetic biochar in AGS in promoting anaerobic digestion performance.

Advances from conventional to biochar enhanced biotreatment of dyeing wastewater: A critical review

DW (Dyeing wastewater) contains a large amount of dye organic compounds. A considerable proportion of dye itself or its intermediate products generated during wastewater treatment process exhibits CMR (Carcinogenic/Mutagenic/Toxic to Reproduction) toxicity. Compared with physicochemical methods, biological treatment is advantageous in terms of operating costs and greenhouse gas emissions, and has become the indispensable mainstream technology for DW treatment. This article reviews the adsorption and degradation mechanisms of dye organic compounds in wastewater and analyzed different biological processes, ranging from traditional methods to processes enhanced by biochar (BC). For traditional biological processes, microbial characteristics and communities were discussed, as well as the removal efficiency of different bioreactors. BC has adsorption and redox electron mediated effects, and coupling with biological treatment can further enhance the process of biosorption and degradation. Although BC coupled biological treatment shows promising dye removal, further research is still needed to optimize the treatment process, especially in terms of technical and economic competitiveness.

Functional biochar in enhanced anaerobic digestion: Synthesis, performances, and mechanisms

Anaerobic digestion technology is crucial in bioenergy recovery and organic waste management. At the same time, it often encounters challenges such as low organic digestibility and inhibition of toxic substances, resulting in low biomethane yields. Biochar has recently been used in anaerobic digestion to alleviate toxicity inhibition, improve the stability of anaerobic digestion processes, and increase methane yields. However, the practical application of biochar is limited, for the properties of pristine biochar significantly affect its application in anaerobic digestion. Although much research focuses on understanding original biochar's fundamental properties and functionalization, there are few reviews on the applications of functional biochar and the effects of critical properties of pristine biochar on anaerobic digestion. This review systematically reviewed functionalization strategies, key performances, and applications of functional biochar in anaerobic digestion. The properties determining the role of biochar were reviewed, the synthesis methods of functional biochar were summarized and compared, the mechanism of functional biochar was discussed, and the factors affecting the function of functional biochar were reviewed. This review provided a comprehensive understanding of functional biochar in anaerobic digestion processes, which would be helpful for the development and applications of engineered biochar.

Pyrolyzed sediment accelerates electron transfer and regulates rhodamine B biodegradation

Electron transfer efficiency is a key factor that determined the removal of environmental pollution through biodegradation. Electron shuttles exogenously addition is one of the measures to improve the electron transfer efficiency. In this study, the sediment was pyrolyzed at different temperature to investigate its properties of mediating electron transfer and removing of rhodamine B (RhB) in microbial electrochemical systems (MESs). Sediments pyrolyzed at 300 °C (PS300) and 600 °C (PS600) have promoted electron transfer which led to 16 % enhancement of power generation while the result is reversed at 900 °C (PS900). Although power output of PS300 and PS600 are similar, the removal efficiency of RhB is not consistent, which may be caused by the biofilm structure difference. Microbial community analysis revealed that the abundance of EAB and toxicity-degrading bacteria (TDB) in PS600 was 6 % higher than that in PS300. The differentiation of microbial community also affected the metabolic pathway, the amino synthesis and tricarboxylic acid cycle were primarily upregulated with PS600 addition, which enhanced the intracellular metabolism. However, a more active cellular anabolism occurred with PS300, which may have been triggered by RhB toxicity. This study showed that pyrolytic sediment exhibits an excellent ability to mediate electron transport and promote pollutant removal at 600 °C, which provides a techno-economically feasible scenario for the utilization of low-carbon-containing solid wastes.

Three-dimensional graphene aerogel mitigated the toxic impact of chloramphenicol wastewater on microorganisms in an EGSB reactor

Anaerobic treatment of chloramphenicol wastewater holds significant promise due to its potential for bioenergy generation. However, the high concentration of organic matter and residual toxic substances in the wastewater severely inhibit the activity of microorganisms. In this study, a three-dimensional graphene aerogel (GA), as a conductive material with high specific surface area (114.942 m2 g-1) and pore volume (0.352 cm3 g-1), was synthesized and its role in the efficiency and related mechanism for EGSB reactor to treat chloramphenicol wastewater was verified. The results indicated that synergy effects of GA for Chemical Oxygen Demand (COD) removal (increased by 8.17 %), chloramphenicol (CAP) removal (increased by 4.43 %) and methane production (increased by 70.29 %). Furthermore, GA increased the average particle size of anaerobic granular sludge (AGS) and promoted AGS to secrete more redox active substances. Microbial community analysis revealed that GA increased the relative abundance of functional bacteria and archaea, specifically Syntrophomonas, Geobacter, Methanothrix, and Methanolinea. These microbial species can participate in direct interspecific electron transfer (DIET). This research serves as a theoretical foundation for the application of GA in mitigating the toxic impact of refractory organic substances, such as antibiotics, on microorganisms during anaerobic treatment processes.

Application of biochar in microbial fuel cells: Characteristic performances, electron-transfer mechanism, and environmental and economic assessments

Biochar is a by-product of thermochemical conversion of biomass or other carbonaceous materials. Recently, it has garnered extensive attention for its high application potential in microbial fuel cell (MFC) systems owing to its high conductivity and low cost. However, the effects of biochar on MFC system performance have not been comprehensively reviewed, thereby necessitating the evaluation of the efficacy of biochar application in MFCs. In this review, biochar characteristics were outlined based on recent publications. Subsequently, various applications of biochar in the MFC systems and their probable processes were summarized. Finally, proposals for future applications of biochar in MFCs were explored along with its perspectives and an environmental evaluation in the context of a circular economy. The purpose of this review is to gain comprehensive insights into the application of biochar in the MFC systems, offering important viewpoints on the effective and steady utilization of biochar in MFCs for practical application.

Enhanced Anaerobic Wastewater Treatment by a Binary Electroactive Material: Pseudocapacitance/Conductance-Mediated Microbial Interspecies Electron Transfer

Anaerobic digestion (AD) is a promising method to treat organic matter. However, AD performance was limited by the inefficient electron transfer and metabolism imbalance between acid-producing bacteria and methanogens. In this study, a novel binary electroactive material (Fe3O4@biochar) with pseudocapacitance (1.4 F/g) and conductance (10.2 μS/cm) was exploited to store-release electrons as well as enhance the direct electron transfer between acid-producing bacteria and methanogens during the AD process. The mechanism of pseudocapacitance/conductance on mediating interspecies electron transfer was deeply studied at each stage of AD. In the hydrolysis acidification stage, the pseudocapacitance of Fe3O4@biochar acting as electron acceptors proceeded NADH/NAD+ transformation of bacteria to promote ATP synthesis by 21% which supported energy for organics decomposition. In the methanogenesis stage, the conductance of Fe3O4@biochar helped the microbes establish direct interspecies electron transfer (DIET) to increase the coenzyme F420 content by 66% and then improve methane production by 13%. In the complete AD experiment, electrons generated from acid-producing bacteria were rapidly transported to methanogens via conductors. Excess electrons were buffered by the pseudocapacitor and then gradually released to methanogens which alleviated the drastic drop in pH. These findings provided a strategy to enhance the electron transfer in anaerobic treatment as well as guided the design of electroactive materials.

Qualitative and quantitative analysis for Cd2+ removal mechanisms by biochar composites from co-pyrolysis of corn straw and fly ash

Removal of heavy metals (e.g., Cd) from contaminated water using waste-converted adsorbents is promising, but the efficiency still needs to be improved. Here, we prepared a functional biochar composite as novel Cd adsorbents by co-pyrolysis of two typical solid wastes, i.e., agricultural corn straw and industrial fly ash. The adsorption behavior and mechanism were investigated using batch and column adsorption experiments and modern characterization techniques. Results showed that alkali-modified fly ash (AMFA) was loaded onto the surface of the corn straw biochar as some fine particle forms, with quartz (SiO₂) and silicate being the main mineral phases on the surface. The maximum sorption capacity fitted by Langmuir model for functionalized biochar composite (FBC700) was up to 137.1 mg g^-1, which was 7.7 times higher than that of the original corn straw biochar (BC700). Spectroscopic analysis revealed that adsorption mechanisms of Cd onto the FBC700 included mainly precipitation and ion exchange, with complexation and Cd-π interaction also contributing. The AMFA could effectively improve the mineral precipitation with Cd. The adsorption columns filled with FBC700 exhibited a longer breakthrough time than that filled with BC700. The adsorption capacity calculated by Thomas model for FBC700 was also approximately 6.0 times higher than that for BC700, showing that FBC700 was more suited to practical applications. This study provided a novel perspective for recycling solid wastes and treating Cd-contaminated water.

Enhanced anaerobic degradation of azo dyes by biofilms supported by novel functionalized carriers

Azo dyes are significant organic pollutants known for their adverse effects on humans and aquatic life. In this study, anthraquinone-2-sulfonate (AQS) immobilized on biochar (BC) was employed as a novel carrier in up-flow anaerobic fixed-bed reactors to induce specific biofilm formation and promote the biotransformation efficiency of azo dyes. Novel carrier-packed reactor 1 (R1) and BC-packed reactor 2 (R2) were used to treat red reactive 2 (RR2) under continuous operation for 175 days. The decolorization rates of R1 and R2 were 96-83% and 91-73%, respectively. The physicochemical characteristics and extracellular polymeric substances (EPS) of the biofilm revealed a more stable structure in R1. Furthermore, the microbial community in R1 interacted more closely with each other and contained more keystone genera. Overall, this study provides a feasible method for improving the biotransformation of azo dyes, thus providing support for practical applications in wastewater treatment projects.

Characteristics of digested sludge-derived biochar for promoting methane production during anaerobic digestion of waste activated sludge

This study investigated a novel method for enhancing methane production during anaerobic digestion of waste activated sludge with digested sludge-derived biochar (DSBC). Using response surface methodology, the following process conditions for DSBC synthesis were optimized: heating rate = 13.23 °C/min, pyrolysis temperature = 516 °C, and heating time = 192 min. DSBC significantly enhanced the methane production by 48 % and improved key coenzyme activity that accelerated the bioconversion of organic matter while promoting the decomposition and transformation of volatile fatty acids. Consequently, the lag period of methane production was shortened to 4.89 days, while the average proportion of methane greatly increased to 73.22%. Thus, DSBC could facilitate efficient methanogenesis in the anaerobic system by promoting electron transfer between syntrophic partners through the charge-discharge cycle of surface oxygen-containing functional groups. The study provides a reference for the resource utilization of anaerobic sludge residues and efficient anaerobic methanogenesis from sludge.

In Situ Enhanced Yields of Microbial Nanowires: The Key Role of Environmental Stress

The conductive microbial nanowires of Geobacter sulfurreducens serve as a model for long-range extracellular electron transfer (EET), which is considered a revolutionary "green" nanomaterial in the fields of bioelectronics, renewable energy, and bioremediation. However, there is no efficient pathway to induce microorganisms to express a large amount of microbial nanowires. Here, several strategies have been used to successfully induce the expression of microbial nanowires. Microbial nanowire expression was closely related to the concentration of electron acceptors. The microbial nanowire was around 17.02 μm in length, more than 3 times compared to its own length. The graphite electrode was used as an alternative electron acceptor by G. sulfurreducens, which obtained a fast start-up time of 44 h in microbial fuel cells (MFCs). Meanwhile, Fe(III) citrate-coated sugarcane carbon and biochar were prepared to test the applicability of these strategies in the actual microbial community. The unsatisfied EET efficiency between c-type cytochrome and extracellular insoluble electron receptors promoted the expression of microbial nanowires. Hence, microbial nanowires were proposed to be an effective survival strategy for G. sulfurreducens to cope with various environmental stresses. Based on this top-down strategy of artificially constructed microbial environmental stress, this study is of great significance for exploring more efficient methods to induce microbial nanowires expression.

Biochar Facilitated Direct Interspecies Electron Transfer in Anaerobic Digestion to Alleviate Antibiotics Inhibition and Enhance Methanogenesis: A Review

Efficient conversion of organic waste into low-carbon biofuels such as methane through anaerobic digestion (AD) is a promising technology to alleviate energy shortages. However, issues such as inefficient methane production and poor system stability remain for AD technology. Biochar-facilitated direct interspecies electron transfer (DIET) has recently been recognized as an important strategy to improve AD performance. Nonetheless, the underlying mechanisms of biochar-facilitated DIET are still largely unknown. For this reason, this review evaluated the role of biochar-facilitated DIET mechanism in enhancing AD performance. First, the evolution of DIET was introduced. Then, applications of biochar-facilitated DIET for alleviating antibiotic inhibition and enhancing methanogenesis were summarized. Next, the electrochemical mechanism of biochar-facilitated DIET including electrical conductivity, redox-active characteristics, and electron transfer system activity was discussed. It can be concluded that biochar increased the abundance of potential DIET microorganisms, facilitated microbial aggregation, and regulated DIET-associated gene expression as a microbial mechanism. Finally, we also discussed the challenges of biochar in practical application. This review elucidated the role of DIET facilitated by biochar in the AD system, which would advance our understanding of the DIET mechanism underpinning the interaction of biochar and anaerobic microorganisms. However, direct evidence for the occurrence of biochar-facilitated DIET still requires further investigation.

Varied promotion effects and mechanisms of biochar on anaerobic digestion (AD) under distinct food-to-microorganism (F/M) ratios and biochar dosages

Biochar (BC) promotes the performance of anaerobic digestion (AD) through different routes, such as enriching microbes, buffering pH and promoting electron transfer. However, the mechanisms and processes of AD that enhanced by BC under various food to microorganism (F/M) ratios are still unclear. The organic transformations, bioelectrochemical characteristics and microbial consortia under the different BC dosages and F/M ratios were studied to reveal the role of BC in an AD process. The electron transfer system (ETS) was proportional to BC dosage and considered to be a key for AD promotion. At the F/M ratios of 0.5 and 1.0, BC accelerated methane production mainly by promoting ETS. The most enhanced specific methanation activities (SMAs) were obtained with 10.0 g/L BC, and the promotion efficiency under the F/M ratio of 1.0 was significantly higher (P < 0.05) than that under the F/M ratio of 0.5. Under the higher F/M ratio of 2.0, BC shortened the entire AD duration for 5.0 ∼ 13.0 days and guaranteed the resilience of AD by expanding the thermodynamic window of syntrophic methanogenesis via direct interspecies electron transfer (DIET). The COD balance analysis and the ecological functional profiles of microbes demonstrated that BC promoted both the anabolism and catabolism of anaerobes, and enhanced the DIET by converting hydrotrophic methanogenesis into acetolastic methanogenesis pathway. Besides, excessive BC enhanced SMA and simultaneously triggered superfluous biomass growth and thus decreased CH₄ yield. This study provided an important reference for further application of BC under various F/M ratios and dosages in AD.

Electron-pool promotes interfacial electron transfer efficiency between pyrogenic carbon and anodic microbes

Relying on surface functional groups and graphitized structure, pyrogenic carbon (PC) was reported to facilitate microbial extracellular electron transfer (EET), which plays a crucial role in diverse biogeochemical reactions. However, little is known about the role of electrical capacitance on EET between microbes and PCs. Here, PCs were obtained from fermented steam bread after carbonization at different temperatures from 700 °C to 1100 °C. PC-900 exhibited the lowest charge transfer resistance and highest electrical capacitance, ascribed to combined effects of graphitic structure and hierarchical porous structure. The interfacial EET was further investigated by enriching electroactive biofilms on PC surface. Faster interfacial EET was demonstrated in PC-900. Maximum power density was proportional to electrical capacitance rather than conductivity. PC-900 enriched the most Geobacter sp., which was positively correlated with electrical capacitance according to the distance-based redundancy analysis. Electrical capacitance was suggested to act as electron pool to facilitate interfacial EET efficiency.

Effects of modified biochars on the shifts of short-chain fatty acid profile, iron reduction, and bacterial community in paddy soil

Biochar is well known as an effective means for soil amendment, and modification on biochar with different methods could improve the benefits for environmental remediation. In this study, two modified biochars were generated with nitric acid (NBC) and hydrogen peroxide (OBC) pretreatment, and a control biochar was produced after washing with deionized water (WBC). The dynamics of short-chain fatty acids (SCFAs), iron concentration and bacterial community in rice paddy soil amended with different biochars or without adding biochar (CK) were studied during 70 days of anaerobic incubation. Compared to CK treatment, the accumulation of SCFAs was largely inhibited by the amendment of biochars. Besides, OBC and WBC increased the accumulation of Fe(II) at the initial stage of incubation. Via 16S rRNA gene sequencing, modified biochars caused significant response of bacterial community in comparison to WBC at Day 0-1, and three biochars favored bacterial α-diversity in the paddy soil at the end of the incubation. Interestingly, positive and negative correlations between NBC and several bacteria taxa (e.g. Geobacter, Fonticella and Clostridium) were observed. The study revealed that modified biochars had significant effects on the shifts of SCFAs, Fe(III) reduction and bacterial diversity, which provides fundamental information for future application of modified biochars in rice cropping ecosystem.

Excess sludge biochar facilitates persulfate activation for highly efficient tetracycline removal

This study proposed a novel advanced oxidation system to treat metal and antibiotic pollution in water simultaneously. Meanwhile, the enhancement effect of absorbed metal pollution on the activation of persulfate in the system was also investigated. As the most widely used and polluting material, tetracycline (TC) and metal Fe were used as the pollutant models. In this study, a carbonaceous material (BC) was prepared from excess sludge and then combined with the persulfate system (Fe/BC/PS). It was found that the best biochar was obtained when the pyrolysis temperature reached 500 °C (BC500), with the specific surface area of 39.712 m²/g. Combining it with 300 mg/L PS, the removal rate of 120 mg/L TC reached 70.6%. Moreover, the sludge biochar itself possessed numerous reaction sites and good defective structure, which provided a perfect reaction site for the variable metals absorbed by BC. They accelerated electron conduction greatly, which led to the activation of PS very active and generating far more active radicals than normal. In addition, it also proposed the rational pathway and potential mechanism of TC degradation based on the degradation intermediates. This study has a high reference value for resource utilization of sewage sludge and antibiotics removal from water.

A sustainable reuse strategy of converting waste activated sludge into biochar for contaminants removal from water: Modifications, applications and perspectives

Conversion of sewage sludge to biochar for contaminants removal from water achieves the dual purpose of solid waste reuse and pollution elimination, in line with the concept of circular economy and carbon neutrality. However, the current understanding of sludge-derived biochar (SDB) for wastewater treatment is still limited, with a lack of summary regarding the effect of modification on the mechanism of SDB adsorption/catalytic removal aqueous contaminants. To advance knowledge in this aspect, this paper systematically reviews the recent studies on the use of (modified) SDB as adsorbents and in persulfate-based advanced oxidation processes (PS-AOPs) as catalysts for the contaminants removal from water over the past five years. Unmodified SDB not only exhibits stronger cation exchange and surface precipitation for heavy metals due to its nitrogen/mineral-rich properties, but also can provide abundant catalytic active sites for PS. An emphatic summary of how certain adsorption removal mechanisms of SDB or its catalytic performance in PS-AOPs can be enhanced by targeted regulation/modification such as increasing the specific surface area, functional groups, graphitization degree, N-doping or transition metal loading is presented. The interference of inorganic ions/natural organic matter is one of the unavoidable challenges that SDB is used for adsorption/catalytic removal of contaminants in real wastewater. Finally, this paper presents the future perspectives of SDB in the field of wastewater treatment. This review can contribute forefront knowledge and new ideas for advancing sludge treatment toward sustainable green circular economy.

Pyrogenic carbon facilitated microbial extracellular electron transfer in electrogenic granular sludge via geobattery mechanism

Electroactive pyrogenic carbon (PC) is an intriguing candidate for realizing the ambitious goals of large-scale applications of microbial electrochemical technologies (METs). In this study, PC was employed to promote the extracellular electron transfer (EET) within the electrogenic granular sludge (EGS) by acting as an electron conduit. The pecan shell-derived PC prepared at three temperatures (600, 800, and 1000 ˚C) contained rich oxygenated-functional moieties (mainly quinone) on the surface, endowing a good electron transfer capacity (EEC). The maximum current density (J_max) of EGS with PC amendment outperformed the control EGS without PC amendment, i.e., 100-132 times higher than J_amx of EGS in the absence of PC. Among various pyrolysis temperatures, the PC derived from 600 ˚C produced the highest J_max (0.40 A/ m²), 0.67-times, and 0.33-times higher than that of PC derived from 800 and 1000 ˚C, respectively. Furthermore, more polysaccharides were secreted in extracellular polymeric substance with PC amendments. The microbial community analysis demonstrated that the PC favored the growth of electroactive bacteria over methanogens. The metabolic pathway revealed that PC induced more functional enzymes in the quinone biosynthesis and cytochrome c and heme synthesis, resulting in an enhanced EET. The EEC of PC was responsible for the EET enhancement effect via PC acting as a geobattery to wire up the EGS and electrodes. Overall, this study pinpoints the finding of PC role in a mixed electroactive biofilm and provides a wide scenario of the PC applications in MET at large scales.

Sustainable restoration of anoxic freshwater using environmentally-compatible oxygen-carrying biochar: Performance and mechanisms

The long-term decline in dissolved oxygen (DO) levels in freshwater systems including rivers and lakes has become a worldwide concern, which can threaten biodiversity, nutrient biogeochemistry, water quality and ultimately human health. Herein, we report a sustainable restoration strategy for anoxic freshwater using local sediment-based biochar as novel oxygen nanobubble carriers. Column incubation experiments were conducted with water and sediment samples from an urban tributary of the Yangtze River. The oxygen-carrying sediment-based biochar (O-SBC) showed long-lasting re-oxygenation performance for anoxic river waters during 28-day period, in which DO was rapidly elevated from ∼0.14 to ∼7.87 mg/L and gradually maintained at ∼4.78 mg/L until the end. O-SBC with multiple functions switched the sediments from a source to a sink of nutrients, and its release of oxygen nanobubbles contributed further decrements of 66.3% NH4+-N and 142.9% PO43--P except for physical blocking and physicochemical adsorption. Notably, a comprehensive focus on restoration mechanism was explored in view of microbial community response. The re-oxygenation was followed by a ∼5.05% increase of bacterial diversity (Shannon index) in water, but a ∼2.40% decrease in sediments. A proliferation of some specific aerobic populations was observed, of which the nitrifying Nitrospira abundances were ∼10-fold higher in the water from O-SBC than the control. Additionally, functional genes involved in nitrous oxide reduction, polyphosphate synthesis/degradation, and thiosulfate oxidation were also enriched. Taken together, our findings can not only expand the promising candidates for oxygen nanobubble carriers based on sediment recycling, but also highlight the microbial molecular mechanisms for anoxic freshwater restoration based on nutrient cycle regulation.

Role and significance of water and acid washing on biochar for regulating methane production from waste activated sludge

Methane recovered from anaerobic digestion of waste activated sludge (WAS) can be used as the energy supplement of the wastewater treatment plant, benefiting to its carbon-neutral operation. In order to enhance methane production, biochar (BC) has been widely selected as conductive material to build direct interspecies electron transfer (DIET) in anaerobic digestion of WAS. However, the role and significance of washing strategies, including water and acid washing, on BCs for regulating methane production have not been reported. This study selected the frequently used woody- (W) and straw (S)-BCs as mode. Compared to raw W-BC, water and acid washing W-BC increased the methane yields by 19.1% and 15.7%, respectively. Differently, the methane yields among raw, water and acid washing S-BCs were similar. Mechanism study showed that both the two washing strategies optimized the properties of raw W-BC for promoting methane production. Water and acid washing W-BCs increased the electron transfer functional groups, such as ketones and quinones, which were not observed in S-BCs. Moreover, the electron-active microorganisms were enriched with the presence of water and acid washing W-BCs, and the predominant pathway for methane production shifted from hydrogentrophic to acetotrophic and DIET methanogenesis, while the microbial communities, including bacteria and archaea, were similar with the presence of raw, water and acid washing S-BCs. These findings of this work provide some new insights for production improvement regulation of methane from anaerobic digestion of wastes induced by BCs.

The removal of uranium (VI) from aqueous solution by the anaerobically digested sewage sludge with hydrothermal pretreatment

Anaerobic digestion (AD) with hydrothermal (HT) pretreatment (sequential HT-AD treatment) is a novel technology for sludge management. HT-AD sludge is rich in functional groups and its applications as pollutant sorbents might be a win-win strategy. This study investigated the removal of uranium (VI) from water using HT-AD sludge as affected by solution pH, temperature, and ion strength. The reusability and heavy metal risk of HT-AD sludge were also assessed. The batch sorption experiments demonstrated that even at an acidic initial pH of 3.2, the maximum adsorption of HT-AD sludge for uranium (VI) reached 117.13 mg/g, higher than that of most carbon-based materials. The inner-sphere and out-sphere complexation between uranium (VI) and the HT-AD sludge dominated the adsorption when pH was in the range of 2-6 and 6-11, respectively. The FTIR and XPS analysis indicated that the primary mechanisms of uranium (VI) adsorption by the HT-AD sludge were the surface complexation and the electric attraction between uranium (VI) and the functional groups (e.g. -COO-) on HT-AD sludge. The removal rate of uranium (VI) by HT-AD sludge only decreased by ∼7% after 3 consecutive adsorption cycles. Leaching experiment showed that less than 5% of the total heavy metal were released from HT-AD sludge. Our research proved that HT-AD sludge can be used as an efficient uranium (VI) adsorbent with good reusability and environmental safety.

Biochar as environmental armour and its diverse role towards protecting soil, water and air

Biochar has been of considerable importance for various environmental applications in recent years. It has exhibited substantial advantages like favourable structural and surface properties, easy process of preparation and widely available feedstocks. These set of exceptional properties make it an efficient, cost-effective and environment friendly source for diversified elimination of pollutants. The heterogeneity of physico-chemical properties offers a possibility for biochar to optimize its efficacy for targeted applications. This review aims to highlight the critical role that biochar plays in various environmental applications, be it in soil, water or air. In particular the article offers a comprehensive review of the recent research findings and updates related to the diversified role of biochar. Also, the interaction of pollutants with biochar functional groups and the impact of variation of parameters on biochar attribute relevant to specific pollutant removal, modifications, mechanisms involved and competence for such removal has been discussed. Different technologies for production of biochar have also been summarized with an emphasis on post treatment of biochar, such as modification and doping. In addition to this, the underlying gaps in the studies carried out so far and recommendations for future research areas in biochar have also been deliberated.

Coupling direct voltage and granular activated carbon modified nanoscale zero valent iron for enhancing anaerobic methane production

Anaerobic digestion technology has been widely used because it has a unique advantage of producing biogas as a renewable energy source. Therefore, several methods were studied to facilitate anaerobic methane production process. Coupling direct voltage and single conductive particles was an effective method to improve anaerobic wastewater treatment efficiency and methane production. However, the enhancement method was limited in this process due to the current of direct voltage or the toxicity of nanoparticles. Therefore, the granular activated carbon loaded with nanoscale zero valent iron (GAC-NZVI) particles prepared by co-precipitation method were added to the anaerobic synthetic wastewater system with direct voltage (0.10 V) to improve the treatment efficiency in this study. GAC-NZVI particles were added into anaerobic system with 0.10 V direct voltage to enhance CH₄ production process. The COD removal and total CH₄ production were enhanced by 4.22 % and 10.83 % with GAC-NZVI particles. The measurement results of EPS and Fe concentration showed that GAC-NZVI particles promoted the secretion of EPS by microorganisms, which could improve the floc strength of granular sludge. The measurements of conductivity and cyclic voltammetry (CV) showed that particles accelerated the metabolism of microorganism and promoted the electron transfer process. The increasing of Methanothrix and Methanobacterium could strengthen the methanogenesis. The abundances of bacteria and archaea using indirect interspecies electron exchange form (such as H₂ or formate transfer microorganisms) were decreased after adding the particles. The results indicated that anaerobic treatment efficiency could be enhanced under the combined action of direct voltage and particles.

Facial fabricated biocompatible homogeneous biocarriers involving biochar to enhance denitrification performance in an anoxic moving bed biofilm reactor

Biochar prepared from pineapple peel was facially combined with polyurethane sponges for the first time to form homogeneous biocompatible biocarriers, which can enhance denitrification performance in an anoxic MBBR. The experiments showed that a higher NO₃^--N removal efficiency (96.24 ± 1.3%) and kinetic constant (0.26 h^-1) were obtained in the MBBR employing these new biocarriers (B-MBBR), compared with a control MBBR with polyurethane sponges (C-MBBR). The attached and suspended biomass of the B-MBBR was increased by 47% and 26%, respectively. Biochar significantly enhanced the abundance of functional bacteria in terms of promoting biofilm (i.e., Leptonema), denitrifying bacteria (i.e., Thauera, Enterobacter and Pseudomonas) and electroactive bacteria (i.e., Geobacter) in the B-MBBR. Meanwhile, based on the content of coenzyme I (NADH) and denitrifying enzymes, biochar would also enhance electron transport activity for denitrification. Consequently, these facial prepared biocarriers are effective to enhance denitrification performance in MBBR with application significance.

The conductivity and redox properties of pyrolyzed carbon mediate methanogenesis in paddy soils with ethanol as substrate

Pyrolyzed carbon such as biochar and activated carbon could influence the methanogenesis in paddy soil, which is an important process controlling methane emission. Different electrochemical properties of pyrolyzed carbon may be involved in methanogenesis, such as conductivity and redox activity. However, their different roles have not been thoroughly illustrated before. In this study, we identified the roles of pyrolyzed carbon redox property and electron conductivity in methanogenesis with ethanol as a substrate, by comparing pyrolyzed carbon samples with sequential change of electrochemical properties. Right after the addition, pyrolyzed carbon with highest electron donating capacity (0.85 mmol/g) promoted the methane generation by 33.3%; while, other pyrolyzed carbon with higher electron accepting capacity and lower electron donating capacity than B4 inhibited the methane generation. The relative abundance of electroactive bacteria and certain methanogens increased with the pyrolysis temperature. The strict linear relationship between electroactive bacteria/certain methanogens and cyclic voltammetry peak currents of paddy soil implied that microbial structure was altered due to the improved the electron transfer situation by the electron shuttle ability of pyrolyzed carbon. This study could deepen our understanding about the effect of pyrolyzed carbon on methanogenesis process.

Study on the performance of HNO3-modified biochar for enhanced medium temperature anaerobic digestion of food waste

Biochar can help promote direct interspecies electron transfer (DIET) and increase methane production; the surface redox groups play a constructive role in these processes. This study attempted to improve the anaerobic digestion (AD) performance by modifying biochar with HNO₃ to increase its redox activity. A comparative experimental study, raw biochar (BC0) and biochar treated with HNO₃ for 6 h (BC6), were conducted to investigate the effect of HNO₃ treatment on the medium temperature AD performance of food waste. Both BC0 and BC6 can enhance CH₄ yield and facilitate the degradation of volatile fatty acids. The enhanced yield of CH₄ was 36% for BC0 and 90% for BC6, respectively. Biochar can also enhance methanogenesis, presumably owing to direct interspecific electron transfer (DIET). Compared with BC0, BC6 had a higher redox activity and a smaller conductivity. It was supposed that BC0 mediated DIET through its conductivity, whereas BC6 accelerated DIET by surface redox groups.

Effects of feedstock and pyrolysis temperature of biochar on promoting hydrogen production of ethanol-type fermentation

Biochar has been shown to benefit fermentative hydrogen production. However, the influencing factors and key characteristics of its promoting function remained to be elucidated. This study investigated the effects of two crucial factors, feedstock and pyrolysis temperature, on the hydrogen production-promoting function of biochar in ethanol-type fermentation. The physicochemical characteristics and promoting effects of biochars prepared with five biomass wastes (coffee ground, corn stalk, Ginkgo biloba leaf, mealworm frass, and sugarcane bagasse) were determined. Sugarcane bagasse-derived biochar (SBBC) showed the best hydrogen production-promoting effect in ethanol-type fermentation. The physicochemical properties of biochar, such as pH, element composition and surface features, were significantly affected by pyrolysis temperature, but the promoting effects were not significantly changed. The hydrogen production-promoting effect of biochar in ethanol-type fermentation was mainly affected by feedstock instead of pyrolysis temperature. A potential promoting mechanism was proposed that biochar prepared at low temperature boosted the hydrogen production with redox activity, while that at high temperature achieved the promotion via cell growth enhancement. This study revealed the key promoting factor of biochar in ethanol-type fermentative hydrogen production, and provided novel insights for the promoting mechanism of biochar.

Algae biochar enhanced methanogenesis by enriching specific methanogens at low inoculation ratio during sludge anaerobic digestion

Carbon materials are promising in improving the performance of anaerobic digestion, however, interactive mechanisms between the carbon-based enhancement and operating parameters remained unclear. Using anaerobic digested sludge as inoculum, the effects of Taihu blue algae biochar (ABC) on methanogenesis at different inoculation ratios were investigated during sludge anaerobic digestion. Results showed that ABC enhanced methane productions at the lower inoculation ratios (4% and 1%, v/v), but not at the higher ratio (10%, v/v). Mechanism analysis demonstrated methanogenic improvements at the lower inoculation ratios were not owing to initial organic loading rate increments. Otherwise, ABC addition at the lower inoculation ratios were more favorable for the enrichment of Methanosarcina than the higher ratio, which might be benefit for methanogenesis through directed interspecies electron transfer. Thus, for the improvement of sludge anaerobic digestion, the microbial enrichments at different inoculation ratios would be more important than the merely biochar addition.

Synergetic effects of biochars and denitrifier on nitrate removal

Nitrate is one of the most common water contaminants and has caused severe environmental problems. This work aimed to investigate the effects of integration of denitrifier with biochars on nitrate removal and understand the underlying mechanisms. The results showed that physiochemical properties of biochars varied according to different feedstocks, which influenced bacteria attachment and nitrate removal through adsorption. However, bacteria could colonize on biochars no matter biochars surface were favorable for bacteria attachment or not. Immobilization of denitrifier on biochars significantly improved nitrate removal efficiencies and reduced lag time. Underlying mechanisms investigation showed that the integration of denitrifier with biochars had synergetic effects on promoting nitrate removal, which improved not only the expression and activity of nitrate reductase, but also the electron transport system activity.

Highly efficient catalytic hydrogenation of nitrophenols by sewage sludge derived biochar

Finding a low cost and effective alternative to noble metal based catalyst has long been concerned in wastewater treatment and organic transformation. This work developed a highly efficient sewage sludge-based catalyst via a simple one-step pyrolysis method, and for the first time, applied it in the catalytic reduction of nitrophenols. Due to the higher content of graphitic nitrogen, abundant defect sites and low electron transfer resistance, sewage sludge derived biochar obtained at 800 °C (SSBC-800) exhibits the best catalytic performance, with the reaction rate of 0.48 min^-1 and turnover frequency for 4-nitrophenol calculated to be 1.25 × 10^-4 mmol•mg^-1 min^-1, which is comparable to or even superior than some reported noble metal-based catalyst. Moreover, SSBC-800 showed good recyclability of 90% 4-nitrophenol removal within 8 min after 4 runs, and maintained high catalytic activity in reduction of other substituent nitrophenols, such as 2-nitrophenol (0.54 min^-1), 3-nitrophenol (0.61 min^-1) and 2,4-dinitrophenol (0.18 min^-1), and in real water samples, indicating its practical applicability. The electron paramagnetic resonance spectra and electrochemical characterization demonstrate that SSBC-800 accelerates the dissociation of BH₄^- to form active hydrogen, which is the main species responsible for 4-nitrophenol reduction, while electron transfer reaction involving the surface bound hydride derived from the intimate contact between BH₄^- and SSBC-800 plays an important role in this process. This research not only provides a novel valorization pathway for sewage sludge, but also sheds new light on further designing of carbon-based catalyst for nitrophenol reduction.

Application of biochars in the remediation of chromium contamination: Fabrication, mechanisms, and interfering species

Chromium (Cr) is one of the most toxic pollutants that has accumulated in terrestrial and aqueous systems, posing serious risks towards living beings on a worldwide scale. The immobilization, removal, and detoxification of active Cr from natural environment can be accomplished using multiple advanced materials. Biochar, a carbonaceous pyrolytic product made from biomass waste, is considered as a promising material for the elimination of Cr contamination. The preparation and properties of biochar as well as its remediation process for Cr ions have been well investigated. However, the distinct correlation of the manufacturing, characteristics, and mechanisms involved in the remediation of Cr contamination by various designed biochars is not summarized. Herein, this review provides information about the production, modification, and characteristics of biochars along with their corresponding effects on Cr stabilization. Biochar could be modified via physical, hybrid, chemical, and biological methods. The remediating mechanisms of Cr contamination using biochars involve adsorption, reduction, electron shuttle, and photocatalysis. Moreover, the coexisting ions and organic pollutants change the pattern of the remediating process of biochar in actual Cr contaminated water and soil. Finally, the present limitations and future perspectives are proposed.

Biochar and GAC intensify anaerobic phenol degradation via distinctive adsorption and conductive properties

The roles of biochar and granular activated carbon (GAC) in the enhancement of anaerobic phenol degradation were characterized through batch tests conducted at different phenol concentrations, coupled with adsorption kinetics, microbial community, and in-situ electrochemical analysis. Both biochar and GAC (15 g/L) led to markedly shorter lag times (t₀) by adsorbing dissolved phenol, and faster maximum CH₄ production rate (R_max) by triggering direct interspecies electron transfer (DIET) during a two-stage (adsorption then degradation) anaerobic phenol degradation. The high adsorption capacity of GAC helped achieve a shorter t₀, but less affected R_max of subsequent phenol degradation. Compared with GAC, which showed higher conductivity but no redox activity, biochar exhibited higher electron exchange capacity (6.57 μmol e^-/g). This higher electron exchange capacity stemmed from the diverse redox-active moieties, which resulted in a more efficient DIET. Meanwhile, the formation of wire-like appendages which linked the enriched DIET partners (such as Syntrophorhabdus and Methanosaeta) on biochar probably futher enhanced the electron transfer. However, hydrogenotrophic methanogenesis was still the main pathway for syntrophic phenol degradation in the suspended sludge. The in-situ analysis also confirmed that biochar and GAC acted as geobatteries and geoconductors, respectively, and that the stimulation of DIET was persistent.

The reduction of nitrobenzene by extracellular electron transfer facilitated by Fe-bearing biochar derived from sewage sludge

In this work, the incorporation of Fe-bearing sludge-derived biochar greatly enhanced both biotic and abiotic reduction of nitrobenzene (NB) to aniline, which was attributed to the concomitant microbial dissimilatory iron reduction. Biogenic Fe(II) produced by Geobacter sulfurreducens dominated the anaerobic reduction of NB following the pseudo-first-order kinetic. Besides, the increase of pyrolysis temperature from 600 to 900 ℃ to generate biochar resulted in an accelerated removal rate of NB in Geobacter-biochar combined system. The morphology and structural characterization of biochar with G. sulfurreducens confirmed the formation of conductive bacteria-biochar aggregates. Electrochemical measurements suggested the presence of graphitized domains and quinone-like moieties in biochar as redox-active centers, which might play an important role in accelerating electron transfer for microbial dissimilatory iron reduction and NB degradation. This study provides a feasible way of using Fe-bearing sludge as a valuable feedstock for biochar generation and its application with electrochemically active bacteria for the bioremediation of nitroaromatic compounds-polluted wastewater.

Magnetite-contained biochar derived from fenton sludge modulated electron transfer of microorganisms in anaerobic digestion

Biochar, with redox moieties or conjugated π-bond, can act as electron shuttle or conductor to facilitate electron transfer of syntrophic metabolism to enhance anaerobic digestion. High pyrolysis temperature (>500 ℃) is usually required to prepare conductive biochar, which however may cause biochar to loss redox moieties such as quinone/hydroquinone that are capable of serving as electron shuttle. Considering that magnetite is an excellent conductor which has been applied in improving syntrophic metabolism of anaerobic digestion, a novel magnetite-contained biochar was prepared using iron-rich Fenton sludge as raw material in this study. Amorphous iron oxides of Fenton sludge were transformed into magnetite at 400 ℃ of pyrolysis, while redox quinone/hydroquinone moieties of biochar were preserved well. Correspondingly, this magnetic biochar owned both high capacitance and excellent conductivity. When supplementing the biochar into an anaerobic digestion system, methane production was significantly enhanced. This study also offered a new approach to recycle Fenton sludge that is regarded as hazardous material.

Inhibition mitigation of methanogenesis processes by conductive materials: A critical review

Methanogenesis can be promoted by the addition of conductive materials. Although stimulating effects of conductive materials on methane (CH₄) production has been extensively reported, the crucial roles on recovering methanogenic activities under inhibitory conditions have not been systematically discussed. This critical review presents the current findings on the effects of conductive materials in methanogenic systems under volatile fatty acids (VFAs), ammonia, sulfate, and nano-cytotoxicity stressed conditions. Conductive materials induce fast VFAs degradation, avoiding VFAs accumulation during anaerobic digestion. Under high ammonia concentrations, conductive materials may ensure sufficient energy conservation for methanogens to maintain intracellular pH and proton balance. When encountering the competition of sulfate-reducing bacteria, conductive materials can benefit electron competitive capability of methanogens, recovering CH₄ production activity. Conductive nanomaterials stimulate the excretion of extracellular polymeric substances, which can prevent cells from nano-cytotoxicity. Future perspectives about unraveling mitigation mechanisms induced by conductive materials in methanogenesis processes are further discussed.

Biochar based sorptive remediation of steroidal estrogen contaminated aqueous systems: A critical review

Remediation of steroidal estrogens from aqueous ecosystems is of prevailing concern due to their potential impact on organisms even at trace concentrations. Biochar (BC) is capable of estrogen removal due to its rich porosity and surface functionality. The presented review emphasizes on the adsorption mechanisms, isotherms, kinetics, ionic strength and the effect of matrix components associated with the removal of steroidal estrogens. The dominant sorption mechanisms reported for estrogen were π-π electron donor-acceptor interactions and hydrogen bonding. Natural organic matter and ionic species were seen to influence the hydrophobicity of the estrogen in multiple ways. Zinc activation and magnetization of the BC increased the surface area and surface functionalities leading to high adsorption capacities. The contribution by persistent free radicals and the arene network of BC have promoted the catalytic degradation of adsorbates via electron transfer mechanisms. The presence of surface functional groups and the redox activity of BC facilitates the bacterial degradation of estrogens. The sorptive removal of estrogens from aqueous systems has been minimally reviewed as a part of a collective evaluation of micropollutants. However, to the best of our knowledge, a critique focusing specifically and comprehensively on BC-based removal of steroidal estrogens does not exist. The presented review is a critical assessment of the existing literature on BC based steroidal estrogen adsorption and attempts to converge the scattered knowledge regarding its mechanistic interpretations. Sorption studies using natural water matrices containing residue level concentrations, and dynamic sorption experiments can be identified as future research directions.

New applications of quinone redox mediators: Modifying nature-derived materials for anaerobic biotransformation process

Due to their wide-distribution, high-biocompatibility and low-cost, nature-derived quinone redox mediators (NDQRM) have shown great potential in bioremediation through mediating electron transfers between microorganisms and between microorganisms and contaminants in anaerobic biotransformation processes. It is obvious that their performance in bioremediation was limited by the availability of quinone-based groups in NDQRM. A sustainable solution is to enhance the electron transfer capacity and retention capacity by the modification of NDQRM. Therefore, this review comprehensively summarized the modification techniques of NDQRM according to their multiple roles in anaerobic biotransformation systems. In addition, their potential applications in greenhouse gas mitigation, contaminant degradation in anaerobic digestion, contaminant bioelectrochemical remediation and energy recovery were discussed. And the problems that need to be addressed in the future were pointed out. The obtained knowledge would promote the exploration of novel NDQRM, and provide suggestions for the design of anaerobic consortia in biotransformation systems.

A review on facilitating bio-wastes degradation and energy recovery efficiencies in anaerobic digestion systems with biochar amendment

In this review, progress in the potential mechanisms of biochar amendment for AD performance promotion was summarized. As adsorbents, biochar was beneficial for alleviating microbial toxicity, accelerating refractory substances degradation, and upgrading biogas quality. The buffering capacity of biochar balanced pH decreasing caused by volatile fatty acids accumulation. Moreover, biochar regulated microbial metabolism by boosting activities, mediating electron transfer between syntrophic partners, and enriching functional microbes. Recent studies also suggested biochar as potential useful additives for membrane fouling alleviation in anaerobic membrane bioreactors (AnMBR). By analyzing the reported performances based on different operation models or substrate types, debatable issues and associated research gaps of understanding the real role of biochar in AD were critically discussed. Accordingly, Future perspectives of developing biochar-amended AD technology for real-world applications were elucidated. Lastly, with biochar-amended AD as a core process, a novel integrated scheme was proposed towards high-efficient energy-resource recovery from various bio-wastes.

Biochar as electron donor for reduction of N2O by Paracoccus denitrificans

Biochar (BC) has been shown to influence microbial denitrification and mitigate soil N2O emissions. However, it is unclear if BC is able to directly stimulate the microbial reduction of N2O to N2. We hypothesized that the ability of BC to lower N2O emissions could be related not only to its ability to store electrons, but to donate them to bacteria that enzymatically reduce N2O. Therefore, we carried out anoxic incubations with Paracoccus denitrificans, known amounts of N2O, and nine contrasting BCs, in the absence of any other electron donor or acceptor. We found a strong and direct correlation between the extent and rates of N2O reduction with BC's EDC/EEC (electron donating capacity/electron exchange capacity). Apart from the redox capacity, other BC properties were found to regulate the BC's ability to increase N2O reduction by P. denitrificans. For this specific BC series, we found that a high H/C and ash content, low surface area and poor lignin feedstocks favored N2O reduction. This provides valuable information for producing tailored BCs with the potential to assist and promote the reduction of N2O in the pursuit of reducing this greenhouse gas emissions.

Activated biochar derived from Opuntia ficus-indica for the efficient adsorption of malachite green dye, Cu+2 and Ni+2 from water

Applicability of biochar in water treatment is gaining interest due to its sustainability and low production cost. Herein, the biochar (BC) and activated biochar (ABC) synthesized from the cladodes of Opuntia ficus-indica (OFI) cactus were evaluated as a renewable adsorbent for adsorption of organic as well as inorganic pollutants including malachite green (MG) dye, Cu⁺² and Ni⁺² heavy metals. The modification of biochar with NaOH resulted higher surface basicity regarding more oxygen containing functional groups on the surface. The maximum uptake of 1341 mg g^-1, 49 mg g^-1 and 44 mg g^-1 onto activated biochar for malachite green dye, Cu⁺² and Ni⁺² was acquired through the best fitted Langmuir isotherm model. Pseudo-second-order and Elovich models were found to provide a suitable fit indicating towards the chemisorption of all three components. Film diffusion and chemisorption are the main steps in adsorption of MG dye and heavy metals on activated biochar. The adsorption mechanisms were also hypothesized for adsorption of MG dye, Cu⁺² and Ni⁺². The remarkable adsorption capacities with higher reusability characteristics for adsorption of organic pollutants as well as inorganic heavy metals entrusts this activated biochar as a potential cost-effective adsorbent to mitigate water pollution issue.

Redox-based electron exchange capacity of biowaste-derived biochar accelerates syntrophic phenol oxidation for methanogenesis via direct interspecies electron transfer

In this study, six different types of biochar (based on two feedstocks and three pyrolytic temperatures) were prepared as individual additives for both syntrophic phenol degradation and methanogenesis promotion. The results showed that for phenol degradation, the addition of biochar (15 g/L) shortened the methanogenic lag time from 15.0 days to 1.1-3.2 days and accelerated the maximum CH₄ production rate from 4.0 mL/d to 10.4-13.9 mL/d. Microbial community analysis revealed that the electro-active Geobacter was enriched (from 3.8-7.7% to 11.1-23.1%), depending on the type of biochar that was added. This indicates a potential shift of syntrophic phenol metabolism from a thermodynamically unfavorable pathway with H₂ as the interspecies electron transfer mediator to direct interspecies electron transfer (DIET). Integrated analysis of methanogenesis dynamics and the electrochemical properties of biochar showed that compared with electrical conductivity, the electron exchange capacity of biochar was more likely to dominate the DIET process, which was due to the presence of redox-active organic functional groups in biochar. The removal of biochar from the anaerobic system generally prolonged the lag time, revealing the importance of adsorption capacity of biochar to mitigate bio-toxicity of phenol to microbial activity.

Mechanistic insights into the enhanced removal of roxsarsone and its metabolites by a sludge-based, biochar supported zerovalent iron nanocomposite: Adsorption and redox transformation

Roxarsone is a phenyl-substituted arsonic acid comprising both arsenate and benzene rings. Few adsorbents are designed for the effective capture of both the organic and inorganic moieties of ROX molecules. Herein, nano zerovalent iron (nZVI) particles were incorporated on the surface of sludge-based biochar (SBC) to fabricate a dual-affinity sorbent that attracts both the arsenate and benzene rings of ROX. The incorporation of nZVI particles significantly increased the binding affinity and sorption capacity for ROX molecules compared to pristine SBC and pure nZVI. The enhanced elimination of ROX molecules was ascribed to synergetic adsorption and degradation reactions, through π-π* electron donor/acceptor interactions, H-bonding, and As-O-Fe coordination. Among these, the predominate adsorption force was As-O-Fe coordination. During the sorption process, some ROX molecules were decomposed into inorganic arsenic and organic metabolites by the reactive oxygen species (ROS) generated during the early stages of the reaction. The degradation pathways of ROX were proposed according to the oxidation intermediates. This work provides a theoretical and experimental basis for the design of adsorbents according to the structure of the target pollutant.

Greenhouse Crop Residue and Its Derived Biochar: Potential as Adsorbent of Cobalt from Aqueous Solutions

This work is focused on the removal of cobalt from aqueous solutions using the greenhouse crop residue and biochars resulting from its pyrolysis at different temperatures, which have not been previously used for this purpose. This study aims to provide insights into the effect of pyrolysis temperature as a key parameter on the cobalt adsorption capacity of these materials. Firstly, the main physicochemical properties of greenhouse crop residue and its biochars prepared under different pyrolysis temperatures were characterized by elemental analysis and FT-IR, among others. Then, the cobalt adsorption capacity of materials was evaluated in batch systems. The best results were obtained for the biochar prepared by pyrolysis at 450 °C (adsorption capacity of 28 mg/g). Generally, the adsorption capacity of the materials increased with pyrolysis temperature. However, when the treatment temperature was increased up to 550 °C, a biochar with worse properties and behavior than cobalt adsorbent was produced. Rather than surface area and other physical properties, functional groups were found to influence cobalt adsorption onto the prepared materials. The adsorption kinetics showed that the adsorption followed pseudo-second-order kinetics model. The obtained equilibrium data were fitted better by the Langmuir model rather than the Freundlich model. Finally, decomposition of loaded-materials was analyzed to assess their possible recycling as fuel materials. The study suggested that greenhouse crop residue can be used as a low-cost alternative adsorbent for cobalt removal from aqueous solutions.

Enhancement of CO2 adsorption on biochar sorbent modified by metal incorporation

This work is scrutinizing the development of metallized biochar as a low-cost bio-sorbent for low temperature CO₂ capture with high adsorption capacity. Accordingly, single-step pyrolysis process was carried out in order to synthesize biochar from rambutan peel (RP) at different temperatures. The biochar product was then subjected to wet impregnation with several magnesium salts including magnesium nitrate, magnesium sulphate, magnesium chloride and magnesium acetate which then subsequently heat-treated with N₂. The impregnation of magnesium into the biochar structure improved the CO₂ capture performance in the sequence of magnesium nitrate > magnesium sulphate > magnesium chloride > magnesium acetate. There is an enhancement in CO₂ adsorption capacity of metallized biochar (76.80 mg g^-1) compare with pristine biochar (68.74 mg g^-1). It can be justified by the synergetic influences of physicochemical characteristics. Gas selectivity study verified the high affinity of biochar for CO₂ capture compared with other gases such as air, methane, and nitrogen. This investigation also revealed a stable performance of the metallized biochar in 25 cycles of CO₂ adsorption and desorption. Avrami kinetic model accurately predicted the dynamic CO₂ adsorption performance for pristine and metallized biochar.