Fe(III)/Fe(II) forwarding a new anammox-like process to remove high-concentration ammonium using nitrate as terminal electron acceptor

A critical review of Mnammox coupled with the NDMO for innovative nitrogen removal

In the context of increasing global nitrogen pollution, traditional biological nitrogen removal technologies like nitrification and denitrification are hindered by high energy consumption. Additionally, the deployment of anaerobic ammonium oxidation (Anammox) technology is constrained due to the slow growth rate of Anammox bacteria and there is a bottleneck in nitrogen removal efficiency. To overcome these technical bottlenecks, researchers have discovered a revolutionary nitrogen removal technology that cleverly combines the redox cycling of manganese with nitrification and denitrification reactions. In this new process, manganese dependent anaerobic ammonium oxidation (Mnammox) bacteria can convert NH4+ to N2 under anaerobic conditions, while nitrate/nitrite dependent manganese oxidation (NDMO) bacteria use NO3-/NO2- as electron acceptors to oxidize Mn2+ to Mn4+. Mn4+ acts as an electron acceptor in Mnammox reaction, thereby realizing the autotrophic nitrogen removal process. This innovative method not only simplifies the steps of biological denitrification, but also significantly reduces the consumption of oxygen and organic carbon, providing a more efficient and environmentally friendly solution to the problem of nitrogen pollution. The article initially provides a concise overview of prevalent nitrogen removal technologies and the application of manganese in these processes, and discusses the role of manganese in biogeochemical cycles, including its discovery, mechanism of action, microbial communities involved, and its impact on these key factors in the process. Subsequently, metabolic principles, benefits, advantages, and environmental considerations of Mnammox coupled with the NDMO process are analyzed in detail. Finally, this article summarizes the shortcomings of current research and looks forward to future research directions. The goal of this article is to provide a valuable reference for researchers to fully understand the application of manganese in nitrogen removal processes.

Novel insights into Feammox coupled with the NDFO: A critical review

Ammonium oxidation coupled with Fe(III) reduction, known as Feammox, and nitrate-dependent ferrous oxidation (NDFO) are two processes that can be synergistically achieved through the Fe(III)/Fe(II) cycle. This integrated approach enables the simultaneous removal of ammonia nitrogen (NH4+-N) and nitrate nitrogen (NO3--N) from wastewater, representing a novel method for complete nitrogen removal. This study presents a systematic and exhaustive examination of the Feammox-NDFO coupled process. An initial thorough exploration of the underlying mechanisms behind the coupling process is conducted, highlighting how the Fe(III)/Fe(II) cycle enables the concurrent occurrence of these reactions. Further, the functional microorganisms associated with and playing a crucial role in the Feammox-NDFO process are summarized. Next, the key influencing factors that govern the efficiency of the Feammox-NDFO process are explored. These include parameters such as pH, temperature, carbon source, iron source, nitrogen source, and various electron shuttles that may mediate electron transfer. Understanding the impact of these factors is essential for optimizing the process. The most recent trends and endeavors on the Feammox-NDFO coupling technology in wastewater treatment applications are also examined. This includes examining both laboratory-scale studies and field trials, highlighting their successes and challenges. Finally, an outlook is presented regarding the future advancement of the Feammox-NDFO technology. Areas of improvement and novel strategies that could further enhance the efficiency of simultaneous nitrogen removal from the iron cycle are discussed. In summary, this study aspires to offer a thorough comprehension of the Feammox-NDFO coupled process, with a focus on its mechanisms, influencing factors, applications, and prospects. It is anticipated to yield invaluable insights for the advancement of process optimization, thus sparking fresh ideas and strategies aimed at accomplishing the thorough elimination of nitrogen from wastewater via the iron cycle.

Magnetite addition reduces nitrite requirement for efficient anaerobic ammonium oxidation by facilitating mutualism of ANAMMOX and FEAMMOX bacteria

Partial nitrification (PN) is crucial for anaerobic ammonium oxidation (ANAMMOX), but faces challenges such as high energy demands and process control. Recent research has highlighted additives like magnetite as potential alternatives to conventional electron acceptors (O₂ and NO₂-) for enhancing ammonium (NH4+) oxidation with lower energy consumption. This study investigated the effect of adding 50 mg/L of magnetite to ANAMMOX reactors, resulting in improved nitrogen (N) removal efficiency. The magnetite-added ANAMMOX (M-ANA) reactor yielded N removal efficiencies of 71 %, 66 %, and 57 % for NH4+:NO2- molar ratios of 1:1.3, 1:0.8, and 1:0.5, respectively. The M-ANA reactor operated under a 0.5 mol lower NO2- concentration achieved similar performance to the control ANAMMOX (C-ANA) reactor operated with a theoretical amount of NO2-. Moreover, the M-ANA reactor showed the potential to remove NH4+ by 56 % without any NO2- supplementation. Metagenomic analysis showed that the addition of magnetite significantly improved the relative abundance of microorganisms involved in the FEAMMOX reaction, such as Fimbriimonas ginsengisoli and Pseudomonas stutzeri. It also facilitated positive mutualism between ANAMMOX and FEAMMOX reactions. In addition, M-ANA granules exhibited a dense and compact structure compared with C-ANA, and the presence of magnetite facilitated the formation of resilient granules. Notably, the useful protein (Heme C) concentration and specific microbial activity in the M-ANA reactor were 1.3 and 2.2 times higher than those in the C-ANA reactor. Overall, the results demonstrate that an appropriate amount of magnetite can enhance the N removal efficiency while reducing the energy input requirements and associated carbon emissions. These findings can guide the future development of carbon- and energy-neutral N removal processes.

New insights and enhancement mechanisms of activated carbon in autotrophic denitrification system utilizing zero-valent iron as indirect electron donors

Zero-valent iron acts as an indirect electron donor, supplying ferrous iron for the nitrate-dependent ferrous oxidation (NDFO) process. The addition of activated carbon (AC) increased the specific NDFO activity in situ and ex situ by 0.4 mg-N/(d·g VSS) and 2.2 mg-N/(d·g VSS), respectively, due to the enrichment of NDFO bacteria. Furthermore, AC reduced the nitrous oxide emission potential of the sludge, a mechanism that metagenomic analysis suggests may act as a cellular energy storage strategy. During a 196-day experiment, a total nitrogen removal efficiency of 53.7 % was achieved, which may be attributed to the upregulation of key genes involved in iron oxidation and denitrification. Based on these findings, a model involving pilin, 'nanowires,' and a cyc2/?→/(FoxE→FoxY)/?→cymA/Complex III/?-mediated pathway for extracellular electron uptake was proposed. Overall, this work provides a feasible strategy for enhancing the nitrogen removal performance of the ZVI-NDFO process.

Enhancing total nitrogen removal in constructed wetlands: A Comparative study of iron ore and biochar amendments

Efficient nitrogen removal in constructed wetlands (CWs) remains challenging when treating agricultural runoff with a low carbon-to-nitrogen ratio (C/N). However, using biochar, iron ore, and FeCl3-modified biochar (Fe-BC) as amendments could potentially improve total nitrogen (TN) removal efficiency in CWs, but the underlying mechanisms associated with adding these substrates are unclear. In this study, five CWs: quartz sand constructed wetland (Control), biochar constructed wetland, Fe-BC constructed wetland, iron ore constructed wetland, and iron ore + biochar constructed wetland, were built to compare their treatment performance. The rhizosphere microbial community compositions and their co-occurrence networks were analyzed to reveal the underlying mechanisms driving their treatment performance. The results showed that iron ore was the most efficient amendment, although all treatments increased TN removal efficiency in the CWs. Ammonia-oxidizing, heterotrophic denitrifying, nitrate-dependent anaerobic ferrous oxidizing (NAFO), and Feammox bacteria abundance was higher in the iron ore system and led to the simultaneous removal of NH4+-N, NO3--N, and NO2--N. Visual representations of the co-occurrence networks further revealed that there was an increase in cooperative mutualism (the high proportion of positive links) and more complex interactions among genera related to the nitrogen and iron cycle (especially ammonia-oxidizing bacteria, heterotrophic denitrifying bacteria, NAFO bacteria, and Feammox bacteria) in the iron ore system, which ultimately contributed to the highest TN removal efficiency. This study provides critical insights into how different iron ore or biochar substrates could be used to treat agricultural runoff in CWs.

Feasibility of simultaneous optimization of Anammox start-up and nitrogen removal performance by intermittent dosing of nanoscale zero-valent iron

The long acclimation period and sensitivity to environmental conditions of Anammox are the bottlenecks for its promotion and application. An innovative strategy was adopted to accelerate functional microbial enhancement and improve nitrogen removal performance by inoculating cryopreserved Anammox sludge and activated sludge with intermittent dosing of nanoscale zero-valent iron (nZVI). The acclimation time was shortened by 76 days with nitrogen removal efficiency (NRE) reaching up to 91.07 %. Anammox, NDFO (nitrate/nitrite-dependent Fe(II) oxidation), Feammox (Fe(III) reduction coupled with anaerobic ammonium oxidation) and abiotic reactions were coupled in the system with nZVI, contributing to 69.79 %, 15.14 %, 9.84 % and 0.25 % of nitrogen removal, respectively. Further microbial analysis demonstrated significant enrichment of functional microorganisms, such as Candidatus Jettenia, Acidovorax and Comamonas. High-efficient nitrogen removal was attribute to the increase of functional genes involved in Anammox, electronic transfer, heme C synthesis and iron metabolism. This work provides an inspiring idea for the mainstream Anammox application.

Potential electron acceptors for ammonium oxidation in wastewater treatment system under anoxic condition: A review

Anaerobic ammonium oxidation has been considered as an environmental-friendly and energy-efficient biological nitrogen removal (BNR) technology. Recently, new reaction pathway for ammonium oxidation under anaerobic condition had been discovered. In addition to nitrite, iron trivalent, sulfate, manganese and electrons from electrode might be potential electron acceptors for ammonium oxidation, which can be coupled to traditional BNR process for wastewater treatment. In this paper, the pathway and mechanism for ammonium oxidation with various electron acceptors under anaerobic condition is studied comprehensively, and the research progress of potentially functional microbes is summarized. The potential application of various electron acceptors for ammonium oxidation in wastewater is addressed, and the N2O emission during nitrogen removal is also discussed, which was important greenhouse gas for global climate change. The problems remained unclear for ammonium oxidation by multi-electron acceptors and potential interactions are also discussed in this review.

Feammox bacterial biofilm formation in HFMB

Nitrogen pollution has been increasing with the development of industrialization. Consequently, the excessive deposition of reactive nitrogen in the environment has generated the loss of biodiversity and eutrophication of different ecosystems. In 2005, a Feammox process was discovered that anaerobically metabolizes ammonium. Feammox with the use of hollow fiber membrane bioreactors (HFMB), based on the formation of biofilms of bacterial communities, has emerged as a possible efficient and sustainable method for ammonium removal in environments with high iron concentrations. This work sought to study the possibility of implementing, at laboratory scale, an efficient method by evaluating the use of HFMB. Samples from an internal circulation reactor (IC) incubated in culture media for Feammox bacteria. The cultures were enriched in a batch reactor to evaluate growth conditions. Next, HFMB assembly was performed, and Feammox parameters were monitored. Also, conventional PCR and scanning electron microscopy (SEM) analysis were performed to characterize the bacterial communities associated with biofilm formation. The use of sodium acetate presented the best performance for Feammox activity. The HFMB operation showed an ammonium (NH4+) removal of 50%. SEM analysis of the fibers illustrated the formation of biofilm networks formed by bacteria, which were identified as Albidiferax ferrireducens, Geobacter spp, Ferrovum myxofaciens, Shewanella spp., and Anammox. Functional genes Archaea/Bacteria ammonia monooxygenase, nrxA, hzsB, nirS and nosZ were also identified. The implementation of HFMB Feammox could be used as a sustainable tool for the removal of ammonium from wastewater produced because of anthropogenic activities.

Effect of sludge redistribution strategy on stability of partial nitrification-anammox process: Further exploration of the potential value of sludge

The stability of the two-stage partial nitrification-anammox (PN/A) system was compromised by the inappropriate conversion of insoluble organic matter. In response, a sludge redistribution strategy was implemented. Through the redistribution of PN sludge and anammox sludge in the two-stage PN/A system, a transition was made to the Anammox-single stage PN/A (A-PN/A) system. This specific functional reorganization, facilitated by the rapid reorganization of microbial communities, has the potential to significantly decrease the current risk of suppression. The results of the study showed that implementing the sludge redistribution strategy led to a substantial enhancement in the total nitrogen removal rate (TNRR) by 87.51%, accompanied by a significant improvement of 34.78% in the chemical oxygen demand removal rate (CRR). Additionally, this approach resulted in a remarkable two-thirds reduction in the aeration requirements. High-throughput sequencing revealed that the strategy enriched anammox and ammonia-oxidizing bacteria while limiting denitrifying bacteria, as confirmed by quantitative polymerase chain reaction analysis. Furthermore, the principal component analysis revealed that the location and duration of aeration had direct and indirect effects on functional gene expression and the evolution of microbial communities. This study emphasizes the potential benefits of restructuring microbial communities through a sludge redistribution strategy, especially in integrated systems that encounter challenges with suppression.

Biochar and zero-valent iron alleviated sulfamethoxazole and tetracycline co-stress on the long-term system performance of bioretention cells: Insights into microbial community, antibiotic resistance genes and functional genes

Antibiotics and antibiotic resistance genes (ARGs), known as emerging contaminants, have raised widespread concern due to their potential environmental and human health risks. In this study, a conventional bioretention cell (C-BRC) and three modified bioretention cells with biochar (BC-BRC), microbial fuel cell coupled/biochar (EBC-BRC) and zero-valent iron/biochar (Fe/BC-BRC) were established and two antibiotics, namely sulfamethoxazole (SMX) and tetracycline (TC), were introduced into the systems in order to thoroughly investigate the co-stress associated with the long-term removal of pollutants, dynamics of microbial community, ARGs and functional genes in wastewater treatment. The results demonstrated that the SMX and TC co-stress significantly inhibited the removal of total nitrogen (TN) (C-BRC: 37.46%; BC-BRC: 41.64%; EBC-BRC: 55.60%) and total phosphorous (TP) (C-BRC: 53.11%; BC-BRC: 55.36%; EBC-BRC: 62.87%) in C-BRC, BC-BRC and EBC-BRC, respectively, while Fe/BC-BRC exhibited profoundly stable and high removal efficiencies (TN: 89.33%; TP: 98.36%). Remarkably, greater than 99% removals of SMX and TC were achieved in three modified BRCs compared with C-BRC (SMX: 30.86 %; TC: 59.29%). The decreasing absolute abundances of denitrifying bacteria and the low denitrification functional genes (nirK: 2.80 × 105-5.97 × 105 copies/g; nirS: 7.22 × 105-1.69 × 106 copies/g) were responsible for the lower TN removals in C-BRC, BC-BRC and EBC-BRC. The amendment of Fe/BC successfully detoxified SMX and TC to functional bacteria. Furthermore, the co-stress of antibiotics stimulated the propagation of ARGs (sulI, sulII, tetA and tetC) in substrates of all BRCs and only Fe/BC-BRC effectively reduced all the ARGs in effluent by an order of magnitude. The findings contribute to developing robust ecological wastewater treatment technologies to simultaneously remove nutrients and multiple antibiotics.

Use of nitrate, sulphate, and iron (III) as electron acceptors to improve the anaerobic degradation of linear alkylbenzene sulfonate: effects on removal potential and microbiota diversification

Linear alkylbenzene sulfonate (LAS) is a synthetic anionic surfactant that is found in certain amounts in wastewaters and even in water bodies, despite its known biodegradability. This study aimed to assess the influence of nitrate, sulphate, and iron (III) on LAS anaerobic degradation and biomass microbial diversity. Batch reactors were inoculated with anaerobic biomass, nutrients, LAS (20 mg L-1), one of the three electron acceptors, and ethanol (40 mg L-1) as a co-substrate. The control treatments, with and without co-substrate, showed limited LAS biodegradation efficiencies of 10 ± 2% and 0%, respectively. However, when nitrate and iron (III) were present without co-substrate, biodegradation efficiencies of 53 ± 4% and 75 ± 3% were achieved, respectively, which were the highest levels observed. Clostridium spp. was prominent in all treatments, while Alkaliphilus spp. and Bacillus spp. thrived in the presence of iron, which had the most significant effect on LAS biodegradation. Those microorganisms were identified as crucial in affecting the LAS anaerobic degradation. The experiments revealed that the presence of electron acceptors fostered the development of a more specialised microbiota, especially those involved in the LAS biodegradation. A mutual interaction between the processes of degradation and adsorption was also shown.

Boosting the denitrification efficiency of iron-based constructed wetlands in-situ via plant biomass-derived biochar: Intensified iron redox cycle and microbial responses

Considering the unsatisfied denitrification performance of carbon-limited wastewater in iron-based constructed wetlands (ICWs) caused by low electron transfer efficiency of iron substrates, utilization of plant-based conductive materials in-situ for improving the long-term reactivity of iron substrates was proposed to boost the Fe (III)/Fe (II) redox cycle thus enhance the nitrogen elimination. Here, we investigated the effects of withered Iris Pseudacorus biomass and its derived biochar on nitrogen removal for 165 days in ICWs. Results revealed that accumulate TN removal capacity in biochar-added ICW (BC-ICW) increased by 14.7 % compared to biomass-added ICW (BM-ICW), which was mainly attributed to the synergistic strengthening of iron scraps and biochar. The denitrification efficiency of BM-ICW improved by 11.6 % compared to ICWs, while its removal capacity declined with biomass consumption. Autotrophic and heterotrophic denitrifiers were enriched in BM-ICW and BC-ICW, especially biochar increased the abundance of electroactive species (Geobacter and Shewanella, etc.). An active iron cycle exhibited in BC-ICW, which can be confirmed by the presence of more liable iron minerals on iron scraps surface, the lowest Fe (III)/Fe (II) ratio (0.51), and the improved proportions of iron cycling genes (feoABC, korB, fhuF, TC.FEV.OM, etc.). The nitrate removal efficiency was positively correlated with the nitrogen, iron metabolism functional genes and the electron transfer capacity (ETC) of carbon materials (P < 0.05), indicating that redox-active carbon materials addition improved the iron scraps bioavailability by promoting electron transfer, thus enhancing the autotrophic nitrogen removal. Our findings provided a green perspective to better understand the redox properties of plant-based carbon materials in ICWs for deep bioremediation in-situ.

Partial nitrification-denitrification and enrichment of paracoccus induced by iron-chitosan beads addition in an intermittently-aerated activated sludge system

Insufficient carbon source has become the main limiting factor for efficient nitrogen removal in wastewater treatment. In this study, an intermittently-aerated activated sludge system with iron-chitosan (Fe-CS) beads addition was proposed for nitrogen removal from low C/N wastewater. By adding Fe-CS beads, partial nitrification-denitrification (PND) process and significant enrichment of Paracoccus (with ability of iron reduction/ammonium oxidation/aerobic denitrification) were observed in the reactor. The accumulation rate of NO2--N reached 81.9 %, and the total nitrogen removal efficiency was improved to 93.9 % by shortening the aeration time. The higher activity of ammonium oxidizing bacteria and inhibited activity of nitrite-oxidizing bacteria in Fe-CS assisted system mediated the occurrence of PND. In contrast, the traditional nitrification and denitrification process occurred in the control group. The high-throughput sequencing analysis and metagenomic results confirmed that the addition of Fe-CS induced 77.8 % and 54.9 % enrichment of Paracoccus in sludge and Fe-CS beads, respectively, while almost no enrichment was observed in control group. Furthermore, with the addition of Fe-CS beads, the expression of genes related to outer membrane porin, cytochrome c, and TCA was strengthened, thereby enhancing the electron transport of Fe(Ⅱ) (electron donor) and Fe(Ⅲ) (electron acceptor) with pollutants in the periplasm. This study provides new insights into the direct enrichment of iron-reducing bacteria and its PND performance induced by the Fe-CS bead addition. It therefore offers an appealing strategy for low C/N wastewater treatment.

Iron cycle-enhanced anaerobic ammonium oxidation in microaerobic granular sludge

Granule-based partial nitritation and anaerobic ammonium oxidation (PN/A) is an energy-efficient approach for treating ammonia wastewater. When treating low-strength ammonia wastewater, the stable synergy between PN and anammox is however difficult to establish due to unstable dissolved oxygen control. Here, we proposed, the PN/A granular sludge formed by a micro-oxygen-driven iron redox cycle with continuous aeration (0.42 ± 0.10 mg-O2/L) as a novel strategy to achieve stable and efficient nitrogen (N) removal. 240-day bioreactor operation showed that the iron-involved reactor had 37 % higher N removal efficiency than the iron-free reactor. Due to the formation of the microaerobic granular sludge (MGS), the bio(chemistry)-driven iron cycle could be formed with the support of anaerobic ammonium oxidation coupled to Fe3+ reduction. Both ammonia-oxidizing bacteria and generated Fe2+ could scavenge the oxygen as a defensive shield for oxygen-sensitive anammox bacteria in the MGS. Moreover, the iron minerals derived from iron oxidation and Fe-P precipitates were also deposited on the MGS surface and/or embedded in the internal channels, thus reducing the size of the channels that could limit oxygen mass transfer inside the MGS. The spatiotemporal assembly of diverse functional microorganisms in the MGS for the realization of stable PN/A could be achieved with the support of the iron redox cycle. In contrast, the iron-free MGS could not optimize oxygen mass transfer, which led to an unstable and inefficient PN/A. This work provides an alternative iron-related autotrophic N removal for low-strength ammonia wastewater.

Synergistic effect and mechanism of nZVI/LDH composites adsorption coupled reduction of nitrate in micro-polluted water

In this study, nZVI/LDH composites were prepared by loading nano zero-valent iron (nZVI) on layered double hydroxide (LDH) surface for adsorption coupled reduction of nitrate (NO3--N). The results showed that the removal of NO3--N and total nitrogen (TN) by the nZVI/LDH composites was 88.64% and 77.63%, respectively, with a selectivity of 55.21% for N2 and only 1.86% for ammonia nitrogen (NH4+-N) within 180 min. The valence states of various N forms during the adsorption-reduction process were investigated. The mechanism of synergistic adsorption-reduction degradation of NO3--N was proposed by measuring the contents of NO3--N, nitrite (NO2--N), and NH4+-N in the aqueous and adsorbed phases in the reaction process, including rapid adsorption of initial NO3--N, chemical reduction of adsorbed NO3--N and resorption of the final product. The nZVI/LDH also maintained up to 82.56% NO3--N removal in natural water, with aging experiments proved that the composites maintained 60.48% NO3--N removal after 15 days. Therefore, the composites may have great application prospects for NO3--N removal in micro-polluted water.

Microbially driven Fe-N cycle: Intrinsic mechanisms, enhancement, and perspectives

The iron‑nitrogen (FeN) cycle driven by microbes has great potential for treating wastewater. Fe is a metal that is frequently present in the environment and one of the crucial trace elements needed by microbes. Due to its synergistic role in the microbial N removal process, Fe goes much beyond the essential nutritional needs of microorganisms. Investigating the mechanisms behind the linked Fe-N cycle driven by microbes is crucial. The Fe-N cycle is frequently connected with anaerobic ammonia oxidation (anammox), nitrification, denitrification, dissimilatory nitrate reduction to ammonium (DNRA), Feammox, and simultaneous nitrification denitrification (SND), etc. Although the main mechanisms of Fe-mediated biological N removal may vary depending on the valence state of the Fe, their similar transformation pathways may provide information on the study of certain element-microbial interactions. This review offers a thorough analysis of the facilitation effect and influence of Fe on the removal of nitrogenous pollutants in various biological N removal processes and summarizes the ideal Fe dosing. Additionally, the synergistic mechanisms of Fe and microbial synergistic N removal process are elaborated, covering four aspects: enzyme activity, electron transfer, microbial extracellular polymeric substances (EPS) secretion, and microbial community interactions. The methods to improve biological N removal based on the intrinsic mechanism were also discussed, with the aim of thoroughly understanding the biological mechanisms of Fe in the microbial N removal process and providing a reference and thinking for employing Fe to promote microbial N removal in practical applications.

Bimolecular versus Trimolecular Reaction Pathways for H2O2 with Hypochlorous Species and Implications for Wastewater Reclamation

The benchmark advanced oxidation technology (AOT) that uses UV/H2O2 integrated with hypochlorous species exhibits great potential in removing micropollutants and enhancing wastewater treatability for reclamation purposes. Although efforts have been made to study the reactions of H2O2 with hypochlorous species, there exist great discrepancies in the order of reaction kinetics, the rate constants, and the molecule-level mechanisms. This results in an excessive use of hypochlorous reagents and system underperformance during treatment processes. Herein, the titled reaction was investigated systematically through complementary experimental and theoretical approaches. Stopped-flow spectroscopic measurements revealed a combination of bi- and trimolecular reaction kinetics. The bimolecular pathway dominates at low H2O2 concentrations, while the trimolecular pathway dominates at high H2O2 concentrations. Both reactions were simulated using direct dynamics trajectories, and the pathways identified in the trajectories were further validated by high-level quantum chemistry calculations. The theoretical results not only supported the spectroscopic data but also elucidated the molecule-level mechanisms and helped to address the origin of the discrepancies. In addition, the impact of the environmental matrix was evaluated by using two waters with discrete characteristics, namely municipal wastewater and ammonium-rich wastewater. Municipal wastewater had a negligible matrix effect on the reaction kinetics of H2O2 and the hypochlorous species, making it a highly suitable candidate for this integration technique. The obtained in-depth reaction mechanistic insights will enable the development of a viable and economical technology for safe water reuse.

Mechanism of magnetite-assisted aerobic composting on the nitrogen cycle in pig manure

Magnetite affects nitrogen cycle of pig manure (PM) biostabilisation was investigated. Various doses of magnetite (0 % (T1); 2.5 % (T2); 5 % (T3); 7.5 % (T4)) were homogeneously added into PM and wolfberry branch fillings (BF) mixture for a 50-day composting. Compared to T1, total nitrogen (TN) loss in gaseous form increased remarkably by 17.51 %, 56.31 %, and 24.91 %, respectively, in T2-T4. In particular, T3 dramatically increased the cumulative N2O emission but decreased NH3 emissions. However, T2 and T3 enhanced the total nitrogen contents by 7.24 % and 3.09 %. Structural equation models (SEM) analysis indicated that magnetite addition increased the direct and indirect pathways of N2O emission. Further analysis revealed that Ruminofilibacter and N2O emission were significantly correlated, and Pseudomonas played a vital role in nitrogen preservation. Although using 2 % magnetite as an additive could increase the TN content, the obvious increase of N2O emission should be considered in engineering practice.

Applying sheet iron to enhance the treatment efficiency of digested effluent with continuous flow and the corresponding mechanism

Because of the unstable wastewater quantity and quality, the biological treatment efficiency of digested effluent was not as expected. A convenient and effective way was eagerly required to improve the efficiency of biological treatment. By sheet iron addition (R1), the COD and TN removal efficiencies under continuous flow condition increased by 59% and 37% respectively. The bulk pH maintained at around 7.5 which benefited most bacteria, while in the control (R0, without sheet iron addition) the pH decreased to 5.0. Both chemical and bio-removal of COD existed in R1, but the chemical removal dominated (63.71%). The enhanced COD removal efficiency came from the chemical oxidation by Fe3+ (47.43%) and Fe0 (10.86%). For the TN removal, the enhancement mainly came from the improvement of anammox activity by Fe3+ (14.87%), the bio-oxidation of ammonium with Fe3+ as electron acceptor (8.78%), and the bio-reduction of nitrate/nitrite with Fe2+ and H2 as electron donor (35.76%). By the first-order kinetic fitting analysis, the COD and TN removal rate in R1 was higher than that in R0. Thus, for a quick and high COD and TN removal from digested effluent, the addition of Fe0/Fe2+/Fe3+ was suggested, and the best form should be Fe0 (e.g., sheet iron). The addition of sheet iron reduces the cost of nitrogen removal and improves the efficiency of COD and TN removal. Comparing with the combined processes, this novel approach has potential advantages with simple operation and high efficiency. It endows the biological process much broader application in digested effluent treatment.

Hydrogel bioreactor drives Feammox and synergistically removes composite pollutants: Performance optimization, microbial communities and functional genetic differences

Mixed pollutant wastewater has been a difficult problem due to the high toxicity of water bodies and the difficulty of treatment. Rice husk biochar modified with nano-iron tetroxide (RBC-nFe3O4) by polyvinyl alcohol cross-linking internal doping was used to introduce iron-reducing bacteria Klebsiella sp. FC61 to construct a bioreactor. The results of the long-term operation of the bioreactor showed that the removal efficiency of ammonia nitrogen (NH4+-N) and chemical oxygen demand best reached 90.18 and 98.49%, respectively. In addition, in the co-presence of Ni2+, Cd2+, and ciprofloxacin, the bioreactor was still able to remove pollutants efficiently by RBC-nFe3O4 and bio-iron precipitation inside the biocarrier. During the long-term operation, Klebsiella was always the dominant species in the bioreactor. And the sequencing data for functional prediction showed that the biocarrier contained a variety of enzymes and proteins involved in Feammox-related activities to ensure the stable and efficient operation of the bioreactor.

Study of the key biotic and abiotic parameters influencing ammonium removal from wastewaters by Fe3+-mediated anaerobic ammonium oxidation (Feammox)

The release of ammonia (as NH4+) into water bodies causes serious environmental problems. Therefore, the removal of ammonia from wastewater effluents has become a worldwide concern. New autotrophic biological alternatives for ammonia removal could reduce the limitations of conventional organic carbon-dependent nitrification-denitrification methods. Here, the potential of anaerobic ammonium oxidation coupled to Fe3+ reduction (a process known as Feammox) is studied in wastewater treatment plants of the yeast and beer production industry, not related to ammonium or iron treatment. This process is presented as a viable option to improve the efficiency of ammonia removal from wastewater. The results of this study show that enrichments under Feammox conditions achieved removals of 28.19-32.25% of the total NH4+. The highest rates of ammonium removal and Fe3+ reduction were achieved using FeCl3 as iron source and pH = 7.0. Different environmental conditions for the enrichments were studied and it was found that the use of sodium acetate as a carbon source and an incubation temperature of 35 °C presented higher rates of iron reduction and higher increase in nitrate concentration, related to ammonium oxidative processes. Likewise, the presence of relevant species of the iron and nitrogen cycles as Ferrovum myxofaciens, Geobacter spp, Shewanella spp, Albidiferax ferrireducens and Anammox was verified, supporting the findings of this study. These results provide information that may be relevant to the potential applicability of Feammox to treat wastewater with high ammonia load and could help develop cost-effective and environmentally friendly methods for ammonium removal in wastewater treatment plants.

The biochar/Fe-modified biocarrier driven simultaneous NDFO and Feammox to remove nitrogen from eutrophic water

Novelty techniques of Fe(III) reduction coupled to anaerobic ammonium oxidation (i.e. Feammox) and nitrate-dependent Fe(II) oxidation (i.e. NDFO) provide new insights into autotrophic nitrogen removal from eutrophic waters. Given that Feammox and NDFO can theoretically complete the simultaneous NH+ 4-N and NO- 3-N removal via Fe(III)/Fe(II) cycle, this study introduces iron powder to the surface of the biocarrier as a solid-phase source of Fe, and biochar was used as an electron shuttle to mix with the iron powder to improve the bioavailability of iron. Batch experiments was carried out for 70 days using simulated eutrophic water as the medium to investigate the effects of the modified biocarrier for enhanced nitrogen removal. The results showed that BC1 (Fe:BC=1:1) with the highest relative Fe content exhibited the highest nitrogen removal efficiency of 66.74%. XPS and XRD results showed both Fe(III) and Fe(II) compounds on the biocarrier surface, confirming the occurrence of Fe(III)/Fe(II) cycle. The ex-situ activity test indicated that functional activity was positively correlated with the iron content of the biocarrier. The in-situ experiments with different substrates showed the occurrence of Feammox and NDFO. NDFO bacteria (Gallionellaceae), Feammox bacteria (Alicycliphilus), denitrifying and digesting bacteria were enriched, suggesting that the coupled nitrogen removal of NDFO and Feammox is the result of cooperation between different functional microorganisms. Thus, the Fe-modified biocarrier showed superior performance and application potential in catalyzing autotrophic nitrogen removal from eutrophic water by functional microorganisms.

Nano iron tetroxide-modified rice husk biochar promoted Feammox performance of Klebsiella sp. FC61 and synergistically removed Ni2+ and ciprofloxacin

The iron reduction coupled with ammonia oxidation process (Feammox) is a biological reaction process associated with the nitrogen cycle that has been discovered in recent years. In this study, the iron-reducing bacterium Klebsiella sp. FC61 was attached by synthesizing nano-loadings of iron tetroxide (nFe₃O₄) onto rice husk biochar (RBC), and the RBC-nFe₃O₄ was used as an electron shuttle to participate in the biological iron reduction process of soluble and insoluble Fe³⁺ to improve the ammonia oxidation efficiency to 81.82%. This acceleration of electron transfer increased the carbon consumption rate and further tuned up the COD removal efficiency to 98.00%. The Feammox could be coupled with iron denitrification for internal nitrogen/iron cycling to reduce the accumulation of nitrate by-products and achieve the recycling of iron. In addition, pollutants such as Ni²⁺, ciprofloxacin, and formed chelates could be removed by pore adsorption and π-π interactions using bio-iron precipitates produced by iron-reducing bacteria.

Long-term nitrogen and phosphorus removal, shifts of functional bacteria and fate of resistance genes in bioretention systems under sulfamethoxazole stress

To understand the long-term performance of bioretention systems under sulfamethoxazole (SMX) stress, an unplanted bioretention system (BRS) and two modified BRSs with coconut-shell activated carbon (CAC) and CAC/zero-valent-iron (Fe⁰) granules (CAC-BRS and Fe/CAC-BRS) were established. Both CAC-BRS and Fe/CAC-BRS significantly outperformed BRS in removing total nitrogen (TN) (CAC-BRS: 82.48%; Fe/CAC-BRS: 78.08%; BRS: 47.51%), total phosphorous (TP) (CAC-BRS: 79.36%; Fe/CAC-BRS: 98.26%; BRS: 41.99%), and SMX (CAC-BRS: 99.74%, Fe/CAC-BRS: 99.80%; BRS: 23.05%) under the long-term SMX exposure (0.8 mg/L, 205 days). High-throughput sequencing revealed that the microbial community structures of the three BRSs shifted greatly in upper zones after SMX exposure. Key functional genera, dominantly Nitrospira, Rhodoplanes, Desulfomicrobium, Geobacter, were identified by combining the functional prediction by the FAPROTAX database with the dominant genera. The higher abundance of nitrogen functional genes (nirK, nirS and nosZ) in CAC-BRS and Fe/CAC-BRS might explain the more efficient TN removal in these two systems. Furthermore, the relative abundance of antibiotic-resistant genes (ARGs) sulI and sulII increased in all BRSs along with SMX exposure, suggesting the selection of bacteria containing sul genes. Substrates tended to become reservoirs of sul genes. Also, co-occurrence network analysis revealed distinct potential host genera of ARGs between upper and lower zones. Notably, Fe/CAC-BRS succeeded to reduce the effluent sul genes by 1-2 orders of magnitude, followed by CAC-BRS after 205-day exposure. This study demonstrated that substrate modification was crucial to maintain highly efficient nutrients and SMX removals, and ultimately extend the service life of BRSs in treating SMX wastewater.

Effects of reducing, stabilizing, and antibiotic agents on "Candidatus Kuenenia stuttgartiensis"

Anaerobic ammon ium oxidizing (anammox) bacteria oxidize ammonium and reduce nitrite, producing N₂, and could play a major role in energy-optimized wastewater treatment. However, sensitivity to various environmental conditions and slow growth currently hinder their wide application. Here, we attempted to determine online the effect of environmental stresses on anammox bacteria by using an overnight batch activity test with whole cells, in which anammox activity was calculated by quantifying N₂ production via headspace-pressure monitoring. A planktonic mixed culture dominated by "Candidatus Kuenenia stuttgartiensis" strain CSTR1 was cultivated in a 30-L semi-continuous stirring tank reactor. In overnight resting-cell anammox activity tests, oxygen caused strong inhibition of anammox activity, which was reversed by sodium sulfite (30 µM). The tested antibiotics sulfamethoxazole, kanamycin, and ciprofloxacin elicited their effect on a dose-dependent manner; however, strain CSTR1 was highly resistant to sulfamethoxazole. Anammox activity was improved by activated carbon and Fe₂O₃. Protein expression analysis from resting cells after anammox activity stimulation revealed that NapC/NirT family cytochrome c (KsCSTR_12840), hydrazine synthase, hydrazine dehydrogenase, hydroxylamine oxidase, and nitrate:nitrite oxidoreductase were upregulated, while a putative hydroxylamine oxidoreductase HAO (KsCSTR_49490) was downregulated. These findings contribute to the growing knowledge on anammox bacteria physiology, eventually leading to the control of anammox bacteria growth and activity in real-world application. KEY POINTS: • Sulfite additions can reverse oxygen inhibition of the anammox process • Anammox activity was improved by activated carbon and ferric oxide • Sulfamethoxazole marginally affected anammox activity.

Autotrophic denitrification using Fe(II) as an electron donor: A novel prospective denitrification process

As a newly identified nitrogen loss pathway, the nitrate-dependent ferrous oxidation (NDFO) process is emerging as a research hotspot in the field of low carbon to nitrogen ratio (C/N) wastewater treatment. This review article provides an overview of the NDFO process and summarizes the functional microorganisms associated with NDFO from different perspectives. The potential mechanisms by which external factors such as influent pH, influent Fe(II)/N (mol), organic carbon, and chelating agents affect NDFO performance are also thoroughly discussed. As the electron-transfer mechanism of the NDFO process is still largely unknown, the extensive chemical Fe(II)-oxidizing nitrite-reducing pathway (NDFO_chem) of the NDFO process is described here, and the potential enzymatic electron transfer mechanisms involved are summarized. On this basis, a three-stage electron transfer pathway applicable to low C/N wastewater is proposed. Furthermore, the impact of Fe(III) mineral products on the NDFO process is revisited, and existing crusting prevention strategies are summarized. Finally, future challenges facing the NDFO process and new research directions are discussed, with the aim of further promoting the development and application of the NDFO process in the field of nitrogen removal.

Enhancement and mechanisms of iron-assisted anammox process

Anaerobic ammonium oxidation (anammox) is a sustainable biological nitrogen removal technology that has limited large-scale applications owing to the low cell yield and high sensitivity of anammox bacteria (AnAOB). Fortunately, iron-assisted anammox, being a highly practical method could be an effective solution. This review focused on the iron-assisted anammox process, especially on its performance and mechanisms. In this review, the effects of iron in three different forms (ionic iron, zero-valent iron and iron-containing minerals) on the performance of the anammox process were systematically reviewed and summarized, and the strengthening effects of Fe (II) seem to be more prominent. Moreover, the detailed mechanisms of iron-assisted anammox in previous researches were discussed from macro to micro perspectives. Additionally, applicable iron-assisted methods and unified strengthening mechanisms for improving the stability of nitrogen removal and shortening the start-up time of the system in anammox processes were suggested to explore in future studies. This review was intended to provide helpful information for scientific research and engineering applications of iron-assisted anammox.

Simultaneous removal of COD and NH4+-N from domestic sewage by a single-stage up-flow anaerobic biological filter based on Feammox

In recent years, Feammox has made it possible to remove NH₄⁺-N under anaerobic conditions; however, its application in practical wastewater treatment processes has not been extensively reported. In this study, an up-flow anaerobic biological filter based on limonite (Lim-UAF) was developed to facilitate long-term and stable treatment of domestic sewage. Lim-UAF achieved the highest removal efficiency of chemical oxygen demand (COD) and NH₄⁺-N at a hydraulic retention time (HRT) of 24 h (Stage II). Specifically, the COD and NH₄⁺-N content decreased from 240.8 and 30.0 mg/L to about 7.5 and 0.35 mg/L, respectively. To analyze the potential nitrogen removal mechanism, the Lim-UAF was divided into three layers according to the height of the reactor. The results showed that COD and NH₄⁺-N removal had remarkable characteristics in Lim-UAF. More than 55.0% of influent COD was removed in the lower layer (0-30 cm) of Lim-UAF, while 60.2% of NH₄⁺-N was removed in the middle layer (30-60 cm). Microbial community analysis showed that the community structure in the middle and upper layers (60-90 cm) was relatively similar, but quite different from that of the lower layer. Heterotrophic bacteria were dominant in the lower layer, whereas iron-reducing and iron-oxidizing bacteria were enriched in the upper and middle layers. The formation of secondary minerals (siderite and Fe(OH)₃) indicated that the Fe(III)/Fe(II) redox cycle occurred in Lim-UAF, which was triggered by the Feammox and NDFO processes. In summary, limonite was used to develop a single-stage wastewater treatment process for simultaneously removing organic matter and NH₄⁺-N, which has excellent application prospects in domestic sewage treatment.

Anaerobic ammonium oxidation driven by dissimilatory iron reduction in autotrophic Anammox consortia

Feammox has been applied to wastewater biological nitrogen removal. However, few studies have reported that Fe(III)(hydr)oxides induced Anammox consortia to remove NH4+ via the Feammox pathway. In this study, Fe(OH)3 was added to Anammox systems to investigate its effect on nitrogen removal via Feammox. The specific Anammox activity increased by 39 % by Fe(OH)3. Ammonia oxidation was observed to occur along with Fe(III) reduction and Fe(II) generation, which was further confirmed by the isotope test with feeding 15NH4+-N to detect 30N2. The cyclic voltammetry test showed that electron-storage capacity of Anammox sludge increased with Fe(OH)3. In situ Fourier transform infrared spectroscopy suggested that Fe(OH)3 enhanced the polarization of functional groups of outer membrane cytochrome of Anammox consortia to benefit extracellular electron transfer. This study demonstrated that Fe(OH)3 could induce Anammox consortia to perform extracellular respiration to enhance NH4+-N removal in the Anammox sludge system.

Recent progress in applications of Feammox technology for nitrogen removal from wastewaters: A review

Feammox process is crucial for the global nitrogen cycle and has great potentials for the treatment of low COD/NH₄⁺-N wastewaters. This work provides a systematic and comprehensive overview of the Feammox process. Specifically, underlying mechanisms and functional microbes mediating the Feammox process are summarized in detail. And key influencing factors including pH, temperature, dissolved oxygen, organic carbon, source of Fe(III) as well as various electron shuttles are discussed. Additionally, recent development trends and attempts of the Feammox technology in wastewater treatment applications are reviewed, and perspectives for future development are presented. A thorough review of the recent progress in Feammox process is expected to provide valuable information for further process optimization, which is helpful to achieve a more economical operation and better nitrogen removal performance in future field applications.

Evidence for the occurrence of Feammox coupled with nitrate-dependent Fe(II) oxidation in natural enrichment cultures

Feammox is a newly discovered process of anaerobic ammonium oxidation driven by Fe(III) reduction. Nitrate-dependent Fe(II) oxidation (NDFO) is the coupling of Fe(II) oxidation and nitrate reduction to produce N₂ under anaerobic conditions. It has not been reported whether the coupling of the two reactions exists in natural enrichment. In this study, enrichment culture experiments were carrired out to prove the occurrence of Feammox with NDFO. The results indicated that the nitrogen and iron cycle were formed during natural enrichment cultures, including Fe(III) reduction and NH₄⁺-N was oxidation to NO₃^--N, NO₂^--N and N₂, Fe(III) and Fe(II) were cyclically formed, and Fe(II) was oxidized with NO₃^--N reduced to N₂. The removal efficiencies of ammonium nitrogen and total nitrogen in the incubation were about 92.9% and 20% respectively. Organic carbon experiments indicate that sodium acetate can promote the initial NO₃^--N removal and a low concentration of organic carbon limited the NDFO process because iron-oxidizing bacteria are mixotrophic microorganisms. The added 9,10-anthraquinone-2,6-disulfonate (AQDS) in the later stage can promote NDFO to remove nitrate, thereby increasing the TN removal efficiency to 50%. ¹⁵N-isotope tracer incubations provided direct evidence for the occurrence of Feammox coupled to NDFO, with rates producing ³⁰N₂ of Feammox (0.024-0.0288 mg N·L^-1·d^-1) and NDFO (0.0465-0.0833 mg N·L^-1·d^-1) in three groups (Wetland/Wheat soil/Sediment). 16S rRNA sequencing further demonstrated that Pseudomonas, Rhodanobacter, Acinetobacter and Thermomonas were the dominant generas among the enrichment cultures, and these bacteria belonged to FeOB and FeRB, which may further promote Feammox coupled to NDFO in the cultivation system.

Achieving Ammonium Removal Through Anammox-Derived Feammox With Low Demand of Fe(III)

Feammox-based nitrogen removal technology can reduce energy consumption by aeration and emission of carbon dioxide. However, the huge theoretical demand for Fe(III) becomes a challenge for the further development of Feammox. This study investigated an anammox-derived Feammox process with an intermittent dosage of Fe2O3 and proposed a novel approach to reduce the Fe(III) consumption. The results showed that anammox genera Candidatus Brocadia and Candidatus Kuenenia in the seed anammox sludge significantly decreased after cultivation. The formation of N2 was the dominating pathway in Feammox while that of nitrite and nitrate could be neglected. Batch tests showed that specific Feammox activity of ammonium oxidation was 1.14–9.98 mg N/(g VSS·d). The maximum removal efficiency of ammonium reached 52.3% in the bioreactor with a low dosage of Fe(III) which was only 5.8% of the theoretical demand in Feammox. The removal of ammonium was mainly achieved through Feammox, while partial nitrification/anammox also played a role due to the non-power and unintentional oxygen leakage. The super-low oxygen also responded to the low demand of Fe(III) in the bioreactor because it could trigger the cycle of Fe(III)/Fe(II) by coupling Feammox and chemical oxidation of Fe(II) to Fe(III). Therefore, anammox-derived Feammox can achieve the removal of ammonium with low Fe(III) demand at super-low oxygen.

Effect of Aquaculture Reclamation on Sediment Nitrates Reduction Processes in Mangrove Wetland

Sediment denitrification, anaerobic ammonium oxidation (anammox), and nitrate dissimilation to ammonium (DNRA) play an important role in controlling the dynamics of nitrates (NOx−) and their fate in estuarine and coastal ecosystems. However, the effects of land-use change on NOx− reduction processes in mangrove sediments are still unclear. Here, we used a mud experiment method combined with a 15N stable isotope tracer method to study the mechanism and ecological environment of the change of land use pattern on the sediment NOx− reduction processes in mangrove wetlands. Our study showed that most physicochemical parameters, NOx− reduction rates, and their gene abundances varied considerably. The denitrification, anammox, and DNRA rates in mangrove sediment cores were in a range of 1.04–4.24 nmol g−1 h−1, 0.14–0.36 nmol g−1 h−1, and 0–2.72 nmol g−1 h−1, respectively. The denitrification, anammox, and DNRA rates in aquaculture sediment cores were in a range of 1.06–10.96 nmol g−1 h−1, 0.13–0.37 nmol g−1 h−1, and 0–1.96 nmol g−1 h−1, respectively. The highest values of denitrification, anammox, DNRA, the contribution of denitrification and DNRA to total NOx− reduction (DEN% and DNRA%), gene abundances (nirS, Amx 16S rRNA, and nrfA), total organic carbon (TOC), total nitrogen (TN), and TOC/TN in sediments were generally found in the top layer (0–5 cm) and then decreased with depth, while the contribution of anammox to total NOx− reduction (ANA%), Fe2+, and Fe2+/Fe3+ were generally increased with sediment depth in both mangrove and aquaculture ecosystems. When mangrove wetlands are transformed into pools, some properties (including TOC, TN, and Fe3+), DNRA rates, DRNA%, and nrfA gene abundances were decreased, while some properties (including NH4+, TOC/TN, Fe2+, and Fe2+/Fe3+), denitrification rates, DEN%, nirS, and ANAMMOX 16S gene abundances were increased. Sediment organic matter (TOC and TN) content and Fe2+ both affected NO3− reduction rates, with organic matter the most prominent factor. Thus, aquaculture reclamation enhances N loss while reducing N retention in sediments of mangrove wetlands, which plays an important role in regulating the source and fate of reactive N in mangrove ecosystems.

New insight into ammonium oxidation processes and mechanisms mediated by manganese oxide in constructed wetlands

Manganese oxide (MnOx) mediated ammonium (NH₄⁺) oxidation in wetlands is receiving increased interest; however, the biochemical mechanisms of this process are vague due to only few studies have focused on terrestrial ecosystems. In this study, three subsurface flow constructed wetlands (CWs), high/low content of Mn-sand CW (HMn-CW/LMn-CW) and quartz sand CW (C-CWs), were set up to explore the extent of ammonium nitrogen (NH₄⁺-N) removal and underlying mechanisms. According to the surface characteristics of Mn-sand, MnOx nanospheres were loaded as birnessite on the sand, while changes of the Mn/N contents indicated involvement of Mn-sand in NH₄⁺-N removal. During the 120-day operation, higher extent of NH₄⁺-N removal with decreased nitrous oxide (N₂O) emission was achieved in the HMn-CW (76%) than in the LMn-CW (73%) and C-CW (67%). According to the distribution of nitrogen compounds and Mn²⁺, Mn-sand in the HMn-CW delayed oxidation of NH₄⁺ and production of nitrate and nitrite. High abundance of Zooloea and Psychrobacter was observed in the Mn-sand layer of HMn-CW, corresponding to a higher observed NH₄⁺-N removal. NH₄⁺ oxidation to hydroxylamine and then to nitrite was enhanced in HMn-CW due to ammonia monooxygenase genes being promoted. The decrease of N₂O emission was closely related to the genus TM7a, verified by Pearson correlation analysis. Our findings expand the knowledge of MnOx-mediated NH₄⁺ oxidation in wetlands and support the potential application of manganese oxide for effective nitrogen removal in CWs.

Autotrophic Fe-Driven Biological Nitrogen Removal Technologies for Sustainable Wastewater Treatment

Fe-driven biological nitrogen removal (FeBNR) has become one of the main technologies in water pollution remediation due to its economy, safety and mild reaction conditions. This paper systematically summarizes abiotic and biotic reactions in the Fe and N cycles, including nitrate/nitrite-dependent anaerobic Fe(II) oxidation (NDAFO) and anaerobic ammonium oxidation coupled with Fe(III) reduction (Feammox). The biodiversity of iron-oxidizing microorganisms for nitrate/nitrite reduction and iron-reducing microorganisms for ammonium oxidation are reviewed. The effects of environmental factors, e.g., pH, redox potential, Fe species, extracellular electron shuttles and natural organic matter, on the FeBNR reaction rate are analyzed. Current application advances in natural and artificial wastewater treatment are introduced with some typical experimental and application cases. Autotrophic FeBNR can treat low-C/N wastewater and greatly benefit the sustainable development of environmentally friendly biotechnologies for advanced nitrogen control.

Anaerobic ammonium oxidation coupled to Fe(III) reduction: Discovery, mechanism and application prospects in wastewater treatment

Fe(III) reduction coupled with anaerobic ammonium oxidation is known as Feammox. Feammox, which was first discovered in wetland ecosystems, has the potential to be used in wastewater treatment systems due to its ability to remove ammonium. Feammox can produce N₂, NO₂^- or NO₃^- through the reduction of Fe(III) and oxidation of ammonium, which is a potential process to nitrogen loss from aquatic ecosystems and terrestrial ecosystems. The Acidimicrobiaceae sp. A6 was the first Feammox functional bacteria that was successfully isolated from wetlands. The nitrogen removal effect of Feammox can be influenced by many environmental factors, such as pH, organic matter, and different sources of Fe(III). Feammox has broad application prospects, but more exploration is needed to apply this principle to wastewater treatment. This review introduces the development, mechanism, functional microbes and factors affecting the Feammox process, and discusses its potential applications.

Adaptability of enhanced bioretention cell for nitrogen and phosphorus removal under two antibiotics stress

The overuse of antibiotics in the medical and aquaculture industries has led to the frequent detection of antibiotics in wastewater. Considering antibiotics would have an unknown impact on wastewater treatment in the future, the long-term effects of sulfamethoxazole (SMX) and tetracycline (TC) stress on the performance, functional genes and microbial community in three bioretention cells were investigated. The results showed that during the experiment, 0.8-1.2 mg/L of SMX would not destroy the water treatment capacity of the bioretention cells, and had a promoting effect on total nitrogen and ammonia nitrogen. 1.6 mg/L of SMX would cause the reduction of nitrogen removal efficiency and the phenomenon of phosphorus release, but it could be restored after a period of operation. TC of 0.8-1.2 mg/L did not have a significant impact on the removal of nutrients in AC-BRC (activated carbon-bioretention cell) and ACI-BRC (activated carbon and iron-bioretention cell), but TC of 1.2 mg/L caused the phenomenon of phosphorus release in BRC and the decrease of total nitrogen removal rate, 1.6 mg/L TC could make the bioretention cell lose its water treatment capacity. qPCR analysis of denitrification genes showed that the abundance of nirS, nirK, nosZ, and hzo had varying degrees of decrease before and after antibiotic stress, which meant the two antibiotics significantly inhibited the reduction of nitrite and nitrous oxide. But for the total number of bacteria, the relative abundance of the four genes has increased. The results of microbial community analysis also found that Proteobacteria, Bacteroidetes, Chloroflexi, and BIrii41, Denitratisoma, Ferritrophicum, Thiobacillus occupied the dominant species at the phylum level and the genus level respectively, which included most of the denitrifying bacteria. During the experiment, the nitrogen and phosphorus removal efficiency of AC-BRC and ACI-BRC were enhanced obviously, but ammonia nitrogen accumulated in ACI-BRC in the early stage of the reaction.

Insight of bacteria and archaea in Feammox community enriched from different soils

Anaerobic ammonium oxidation coupled to Fe(III) reduction, known as Feammox, is a newly discovered nitrogen-cycling process, which serves an important role in the pathways of nitrogen loss in the environment. However, the specific types of microorganisms involved in Feammox currently remain unclear. In this study, we selected two groups of soil samples (paddy and mine), from considerably different habitats in South China, to acclimate Feammox colonies. The Paddy Group had a shorter lag period than the Mine Group, while the ammonium transformation rate was nearly equal in both groups in the mature period. The emergence of the Feammox activity was found to be associated with the increased abundance of iron-reducing bacteria, especially Clostridium_sensu_stricto_12, Desulfitobacterium, Thermoanaerobaculum, Anaeromyxobacter and Geobacter. Ammonium oxidizing archaea and methanogens were dominant among the known archaea. These findings extend our knowledge of the microbial community composition of the potential Feammox microbes from soils under different environmental conditions, which broadens our understanding of this important Fe/N transformation process.

The effects of Fe(III) and Fe(II) on anammox process and the Fe-N metabolism

This study aims to compare the effects of different Fe stress on anammox (anaerobic ammonium oxidation) process, therefore seven identical reactors were operated under different Fe(II)/Fe(III) concentrations. After 38 days of operation, the anammox activity was highest (10.49 ± 0.41 mg-TN/(g-VSS·h)) under conditions of 5 mg/L-Fe(II), while under 30 mg/L-Fe(III) displayed severe inhibition. The results showed that continuous addition of 30 mg/L-Fe(III) would damage the composition of EPS (extracellular polymeric substances) and make anammox bacteria more sensitive to environmental stress. While high Fe(II) concentrations could result in precipitates encasing granular sludge, affecting substrate utilization. Moreover, the results of ΔNO₃^--N/ΔNH₄⁺-N indicated that Fe(II)-dependent nitrate reduction was induced in reactors added with Fe(II). OM27_clade and norank_f__Burkholderiaceae might be candidates for this process according to the correlation of genera and functional genes (based on the PICRUSt 2 functional prediction). Overall, this research is expected to provide new ideas to the effects of Fe(II)/Fe(III) on anammox and to the practical application of coupled system based on anammox in wastewater treatment.

Enhanced removal of sulfamethoxazole and tetracycline in bioretention cells amended with activated carbon and zero-valent iron: System performance and microbial community

Antibiotics, heavily used as medicine, enter the environment inevitably and raise concerns of the risk to the ecosystems. In this study, we explored the removal efficiency and mechanism of sulfamethoxazole (SMX) and tetracycline (TC) in activated carbon (AC) and AC-zero-valent iron amended bioretention cells (AC-BRC and AC-Fe-BRC) compared with a conventional bioretention cell (BRC). Moreover, the system performance of BRCs, the shifts of the microbial community, as well as the fate of corresponding antibiotic resistance genes (ARGs) were comprehensively investigated. The results showed that, exposed to antibiotics notwithstanding, AC-BRC and AC-Fe-BRC significantly outperformed BRC on total nitrogen (TN) removal (BRC: 70.36 ± 13.61%; AC-BRC: 91.43 ± 6.41%; AC-Fe-BRC: 83.44 ± 12.13%). Greater than 97% of the total phosphorous (TP) was removed in AC-Fe-BRC, remaining unimpacted despite of the selective pressure from SMX/TC. Excellent removals of antibiotics (above 99%) were achieved in AC-BRC and AC-Fe-BRC regardless of the types and initial concentrations (0.8 mg/L, 1.2 mg/L and 1.6 mg/L) of antibiotics, dwarfing the removal performance of BRC (12.2 ± 4.4%-64.2 ± 5.5%). The illumina high throughput sequencing analysis demonstrated the concomitant variations of microbial communities as SMX/TC was loaded. AC layers tended to alleviate the adverse effect of SMX/TC on microbial biodiversity. Proteobacteria (34.55-68.47%), Chloroflexi (7.13-33.54%), and Bacteroidetes (6.20-21.03%) were the top three dominant phyla in the anaerobic zone of the BRCs. The abundance of antibiotic resistance genes (ARGs) sulI, sulII and tetA genes were dramatically higher in AC-BRC and AC-Fe-BRC when exposed to 0.8 mg/L SMX/TC, which indicated that relatively low concentrations of SMX/TC induced the production of these three ARGs in the presence of AC. Although the amendment of AC led to highly efficient SMX/TC removals, further investigation is still required to improve the retention of ARGs in BRCs.

Novel biotechnologies for nitrogen removal and their coupling with gas emissions abatement in wastewater treatment facilities

Wastewaters contaminated with nitrogenous pollutants, derived from anthropogenic activities, have exacerbated our ecosystems sparking environmental problems, such as eutrophication and acidification of water reservoirs, emission of greenhouse gases, death of aquatic organisms, among others. Wastewater treatment facilities (WWTF) combining nitrification and denitrification, and lately partial nitrification coupled to anaerobic ammonium oxidation (anammox), have traditionally been applied for the removal of nitrogen from wastewaters. The present work provides a comprehensive review of the recent biotechnologies developed in which nitrogen-removing processes are relevant for the treatment of both wastewaters and gas emissions. These novel processes include the anammox process with alternative electron acceptors, such as sulfate (sulfammox), ferric iron (feammox), and anodes in microbial electrolysis cells (anodic anammox). New technologies that couple nitrate/nitrite reduction with the oxidation of methane, H₂S, volatile methyl siloxanes, and other volatile organic compounds are also described. The potential of these processes for (i) minimizing greenhouse gas emissions from WWTF, (ii) biogas purification, and (iii) air pollution control is critically discussed considering the factors that might trigger N₂O release during nitrate/nitrite reduction. Moreover, this review provides a discussion on the main challenges to tackle towards the consolidation of these novel biotechnologies.

A promising destiny for Feammox: From biogeochemical ammonium oxidation to wastewater treatment

Ammonium is one of the most common forms of nitrogen that exists in wastewater, and it can cause severe pollution when it is discharged without treatment. New technologies must be developed to effectively remove ammonium because conventional nitrification-denitrification methods are limited by the lack of organic carbon. Anaerobic ammonium oxidation coupled to Fe(III) reduction is known as Feammox, and is a recently discovered nitrogen cycling process. Feammox can proceed under autotrophic or anaerobic conditions and effectively transforms ammonium to stable, innocuous dinitrogen gas, using the ferric iron as an electron acceptor. This method is cost-effective, environmentally friendly, and conducive to joint application with other nitrogen removal reactions in low-C/N municipal wastewater treatments. This review provides a comprehensive survey of Feammox mechanistic investigations and presents studies regarding the functional microorganism colonies. The potential for Feammox to be applied for the removal of nitrogen from various polluted water sources and the combination of the Feammox process with other frontier environmental technologies are also discussed. In addition, future perspectives for removing ammonium using Feammox are presented.

Enhanced adsorption and reduction performance of nitrate by Fe-Pd-Fe3O4 embedded multi-walled carbon nanotubes

Multi walled carbon nanotubes (MWCNTs) have attracted more and more attention as adsorbents due to their excellent adsorption properties. By loading metal particles on MWCNTs, the chemical reduction ability of adsorbed pollutants could be provided, so as to achieve the purpose of adsorption and degradation of pollutants. Therefore, the removal process of NO₃^--N by Fe-Pd-Fe₃O₄/MWCNTs was studied, including rapid adsorption of initial pollutants, gradual reduction of intermediate products and re-adsorption of final products. The results showed that Fe-Pd-Fe₃O₄/MWCNTs completely removed NO₃^--N within 2 h, 39% and 25% of which were converted into NO₂^--N and NH₄⁺-N. The adsorption efficiency, kinetics, capacity and adsorption energy all followed the order of NH₄⁺-N > NO₂^--N > NO₃^--N. With the recoverability and reusability of Fe-Pd-Fe₃O₄/MWCNTs having been confirmed in 5 consecutive cycles, the removal rate of NO₃^--N still reached 43%. It has been shown that MWCNTs prolonged the reducing power for NO₃^--N, due to avoiding the aggregation of metal particles. The rapid adsorption of initial pollutants, effective stepwise reduction and convenient recovery processes were of great value for the rehabilitation of polluted water.

Nitrogen removal from ammonium- and sulfate-rich wastewater in an upflow anaerobic sludge bed reactor: performance and microbial community structure

Autotrophic ammonium removal by sulfate-dependent anaerobic ammonium oxidation (S-Anammox) process was studied in an upflow anaerobic sludge bed reactor inoculated with Anammox sludge. Over an operation period of 371 days, the reactor with a hydraulic retention time of 16 h was fed with influent in which NH₄⁺ concentration was fixed at 70 mg N L^-1, and the molar ratio of NO₂^-:NO₃^-:SO₄^2- was 1:0.2:0.2, 0.5:0.1:0.3 and 0:0:0.5 in stages I, II and III, respectively. As the NO₂^- in influent was entirely replaced by SO₄^2-, the NH₄⁺ removal rate was 31.02 mg N L^-1 d^-1, and the conversion rate of SO₄^2- was 8.18 mg S L^-1 d^-1. On grounds of the high NH₄⁺:SO₄^2- removal ratio (8.67:1), the S^2- accumulation and pH drop in effluent, as well as the analysis results of microbial community structure, the S-Anammox process was speculated to play a dominant role in stage III. The NH₄⁺ over-transformation was presumably as a consequence of the cyclic regeneration of SO₄^2-. Concerning the microbial characteristics in the system, the Anammox bacteria (Candidatus Brocadia), sulfate-reducing bacteria (SRB) (Desulfatiglans and Desulfurivibrio) and sulfur-oxidizing bacteria (SOB) (Thiobacillus) in biomass was enriched in the case of without addition of NO₂^- in influent. Sulfate reduction driven ammonium anaerobic oxidation was probably attributed to the coordinated metabolism of nitrogen- and sulfur-utilizing bacteria consortium, in which Anammox bacteria dominates the nitrogen removal, and the SRB and SOB participates in the sulfur cycle as well as accepts required electrons from Anammox bacteria through a direct inter-species electron transfer (DIET) pathway.

Responses of anammox process to elevated Fe(III) stress: Reactor performance, microbial community and functional genes

The aim of present study was to re-evaluate the impacts of elevated Fe(III) stress on anaerobic ammonium oxidation (anammox) process. The results indicated that long-term low concentration Fe(III) (5 and 10 mg/L) exposure significantly improved the nitrogen removal efficiency of anammox process, while high concentration Fe(III) (50 and 100 mg/L) significantly deteriorated the reactor performance. Batch assays showed that the specific anammox activity, heme c content and hydrazine dehydrogenase activity were significantly increased and decreased under low and high concentration Fe(III) exposure, respectively, indicating an enhancement and inhibition of anammox activity. Moreover, the presence of high concentration Fe(III) significantly shifted the anammox community structure. Ca. Brocadia was the predominant anammox genus, whose abundance decreased from 14.26% to 8.13% as Fe(III) concentration increased from 0 to 100 mg/L. In comparison, the abundance of denitrifiers progressively increased from 3.70% to 6.68% with increasing Fe(III) concentration. These suggested that different functional bacteria differed in their responses to Fe(III) stress. Furthermore, long-term Fe(III) exposure significantly up-regulated the abundances of genes associated with nitrogen metabolism and Fe(III) reduction. Overall, the obtained findings are expected to advances our understanding of the responses of anammox process to elevated Fe(III) stress.

Anaerobic Ammonium Removal Pathway Driven by the Fe(II)/Fe(III) Cycle through Intermittent Aeration

Feammox, that is, Fe(III) reduction coupled to anaerobic ammonium oxidation, has been reported to play an important role in the nitrogen cycle in natural environments. However, the application of Feammox in wastewater treatment is limited because continuous Fe(III) supplementation is required for achieving continuous nitrogen removal, which is not feasible in practice. In this study, air was aerated intermittently into the Feammox system containing iron and high-content ammonium for oxidizing Fe(II) generated from Feammox to Fe(III), then, the produced Fe(III) participated in the next round of Feammox, leading to continuous nitrogen removal through the Fe(II)/Fe(III) cycle. The results showed that after each 10 min of aeration (150 mL/min), every 6-7 days, dissolved oxygen (DO) increased from 0 to about 0.4 mg/L, accompanied by a decrease in Fe(II) and an increase in Fe(III). One day after the aeration, DO was undetectable, and then, Fe(II) content increased and Fe(III) content decreased. On day 90, NH₄⁺-N content in the aerated reactor was only 10.2 mg/L, while it remained at around 288.3 mg/L in the aeration-free group. X-ray diffraction showed that the generated Fe(III) through air aeration was Fe(OH)₃. Microbial analysis showed that anammox and nitrification/denitrification could be excluded in the system. This NH₄⁺ removal process, driven by the Fe(II)/Fe(III) cycle with O₂ as the terminal electron acceptor, might be used as an in situ remediation method for treating high-content NH₄⁺.