Combination of high resolution mass spectrometry and a halogen extraction code to identify chlorinated disinfection byproducts formed from aromatic amino acids

Effects of solid phase extraction conditions on molecular composition of unknown disinfection byproducts in chlorinated municipal wastewater based on FT-ICR-MS analysis

Disinfection byproducts (DBPs) have been extensively investigated during the chlorination of water and wastewater. Although over 700 DBPs have been identified, more than 50% of the total organic halogen remains unknown. Solid phase extraction (SPE) has been emerged as a popular pretreatment approach for enrichment and desalting of unknown DBPs prior to the mass spectrometry analysis. However, the effects of SPE conditions on unknown DBPs in real wastewater have not yet been reported. Herein, three factors (acid types, pH values, and sorbent types) influencing the composition of DBPs in chlorinated municipal wastewater were systematically investigated by Fourier transform ion cyclotron resonance mass spectrometry and statistical analysis. The results indicated that the number of DBPs in different SPE conditions ranged from 280 to 706, and the majority ones were Br-DBPs and CHOX compounds. Compared with H2SO4, more common DBPs were found when using HCl and HCOOH to adjust the pH values of samples. The unique DBPs extracted at pH 1.0 and 2.0 generally owned higher modified aromaticity index (AImod) value and C number than at pH 3.0. The effect of acid types on the extracted DBPs was pH dependent, and the total number of extracted DBPs increased with the increasing of pH value. In terms of sorbent types, the unique DBPs in C18 sorbent possessed low O/C ratios (O/C < 0.6), whereas the unique ones in HLB sorbent owned high O/C ratios (O/C > 0.6). Compared with C18 and HLB sorbents, the unique DBPs extracted in PPL sorbent were characterized by relatively high AImod and DBE values. Based on mass difference analysis, 1496 precursors-DBPs pairs were identified in all extracted samples, with the highest number of bromine substitution reaction. Overall, the effects of SPE conditions on the composition of unknown DBPs should not be overlooked, and the amount and diversity of DBPs may be underestimated under a single SPE condition. This study provides new methodological references for the accurate identification of unknown DBPs with different characteristics in real wastewater.

Nontarget analysis and characterization of p-phenylenediamine-quinones and -phenols in tire rubbers by LC-HRMS and chemical species-specific algorithm

BACKGROUND

N,N'-disubstituted p-phenylenediamine-quinones (PPDQs) are oxidization derivatives of p-phenylenediamines (PPDs) and have raised extensive concerns recently, due to their toxicities and prevalence in the environment, particularly in water environment. PPDQs are derived from tire rubbers, in which other PPD oxidization products besides reported PPDQs may also exist, e.g., unknown PPDQs and PPD-phenols (PPDPs).

RESULTS

This study implemented nontarget analysis and profiling for PPDQ/Ps in aged tire rubbers using liquid chromatography-high-resolution mass spectrometry and a species-specific algorithm. The algorithm took into account the ionization behaviors of PPDQ/Ps in both positive and negative electrospray ionization, and their specific carbon isotopologue distributions. A total of 47 formulas of PPDQ/Ps were found and elucidated with tentative or accurate structures, including 25 PPDQs, 18 PPDPs and 4 PPD-hydroxy-quinones (PPDHQs). The semiquantified total concentrations of PPDQ/Ps were 14.08-30.62 μg/g, and the concentrations followed the order as: PPDPs (6.48-17.39) > PPDQs (5.86-12.14) > PPDHQs (0.16-1.35 μg/g).

SIGNIFICANCE

The high concentrations and potential toxicities indicate that these PPDQ/Ps could seriously threaten the eco-environment, as they may finally enter the environment, accordingly requiring further investigation. The analysis strategy and data-processing algorithm can be extended to nontarget analysis for other zwitterionic pollutants, and the analysis results provide new understandings on the environmental occurrence of PPDQ/Ps from source and overall perspectives.

Identifying initial transformation products during chlorination of the indole moiety and unveiling their formation mechanisms

To identify toxicity drivers within poorly characterized high-molar-weight disinfection by-products (DBPs), relatively stable high-yield initial transformation products generated from aromatic amino acids and peptides and humic substances have drawn much attention. In this study, initial transformation products in chlorination of the indole moiety in tryptophan (Trp) are proposed and their formation mechanisms were investigated using a quantum chemical computational method. The results indicate that 3-Cl-Trp+ is initially formed after the Cl+ of HOCl attacks the indole moiety, and nucleophilic addition with nucleophilic agents (H2O and OCl-) is thermodynamically preferred over deprotonation to generate 2-X-3-Cl-indoline moiety (X = OH and OCl), which is in contrast to indole. Over 25 types of initial transformation products are proposed from the 2-X-3-Cl-indoline moiety and two ring opening pathways were found at N1-C2 and C2-C3 bonds. Significantly, most structures of initial transformation products proposed based on experimental detection m/z values were confirmed using quantum chemical calculations and some new products are proposed in this work. The results are helpful to expand our understanding of the intrinsic reactivity of aromatic ring towards chlorination by hypochlorous acid.

Revisiting the chloramination of phenolic compounds: Formation of novel high-molecular-weight nitrogenous disinfection byproducts

Disinfection is critical for ensuring water safety; however, the potential risks posed by disinfection byproducts (DBPs) have raised public concern. Previous studies have largely focused on low-molecular-weight DBPs with one or two carbon atoms, leaving the formation of high-molecular-weight DBPs (HMW DBPs, with more than two carbon atoms) less understood. This study explores the formation of HMW DBPs during the chloramination of phenolic compounds using a novel approach that combines high-resolution mass spectrometry with density functional theory (DFT) calculations. For the first time, we identified nearly 100 previously unreported HMW nitrogenous DBPs (N-DBPs), with nearly half of those being halogenated N-DBPs. These N-DBPs were tentatively identified as heterocyclic (e.g., pyrrole and pyridine analogs) and coupling heterocyclic N-DBPs. Through detailed structure analysis and DFT calculations, the key formation steps of heterocyclic N-DBPs (monochloramine-mediated ring-opening reactions of halobenzoquinones) and new bonding mechanisms (C-N, C-O, and C-C bonding) of the coupling heterocyclic N-DBPs were elucidated. The selective formation of these novel N-DBPs was significantly influenced by factors such as contact time, monochloramine dosage, pH, and bromide concentration. Our findings emphasize the occurrence of diverse HMW heterocyclic N-DBPs, which are likely toxicologically significant, underscoring the need for further research to evaluate and mitigate their potential health risks in water disinfection.

Computational-aided analysis of the pathway and mechanism of dichloroacetonitrile formation from phenylalanine upon chloramination

Dichloroacetonitrile (DCAN) is an emerging disinfection by-product (DBP) that is widespread in drinking water. However, the pathway for DCAN formation from aromatic amino acids remains unclear, leading to a lack of an understanding of its explicit fate during chloramination. In this study, we investigated the specific formation mechanism of DCAN during the chloramination of phenylalanine based on reaction kinetics and chemical thermodynamics. The reason for differences between aldehyde and decarboxylation pathways was explained, and kinetic parameters of the pathways were obtained through quantum chemistry calculations. The results showed that the reaction rate constant of the rate-limiting step of the aldehyde pathway with 1.9 × 10-11 s-1 was significantly higher than that of decarboxylation (3.6 × 10-16 s-1 M-1), suggesting that the aldehyde pathway is the main reaction pathway for DCAN formation during the chloramination of phenylalanine to produce DCAN. Subsequently, theoretical calculations were performed to elucidate the effect of pH on the formation mechanism, which aligned well with the experimental results. Dehydrohalogenation was found to be the rate-limiting step under acidic conditions with reaction rate constants higher than those of the rate-limiting step (expulsion of amines) under neutral conditions, increasing the rate of DCAN formation. This study highlights the differences in DCAN formation between the decarboxylation and aldehyde pathways during the chloramination of precursors at both molecular and kinetic levels, contributing to a comprehensive understanding of the reaction mechanisms by which aromatic free amino acids generate DCAN.

Screening Disinfection Byproducts in Arid-Coastal Wastewater: A Workflow Using GC×GC-TOFMS, Passive Sampling, and NMF Deconvolution Algorithm

Disinfection during tertiary municipal wastewater treatment is a necessary step to control the spread of pathogens; unfortunately, it also gives rise to numerous disinfection byproducts (DBPs), only a few of which are regulated because of the analytical challenges associated with the vast number of potential DBPs. This study utilized polydimethylsiloxane (PDMS) passive samplers, comprehensive two-dimensional gas chromatography (GC×GC) coupled with time-of-flight mass spectrometry (TOFMS), and non-negative matrix factorization (NMF) spectral deconvolution for suspect screening of DBPs in treated wastewater. PDMS samplers were deployed upstream and downstream of the chlorination unit in a municipal wastewater treatment plant located in Abu Dhabi, and their extracts were analyzed using GC×GC-TOFMS. A workflow incorporating a multi-tiered, eight-filter screening process was developed, which successfully enabled the reliable isolation of 22 candidate DBPs from thousands of peaks. The NMF spectral deconvolution improved the match factor score of unknown mass spectra to the reference mass spectra available in the NIST library by 17% and facilitated the identification of seven additional DBPs. The close match of the first-dimension retention index data and the GC×GC elution patterns of DBPs, both predicted using the Abraham solvation model, with their respective experimental counterparts-with the measured data available in the NIST WebBook and the GC×GC elution patterns being those observed for the candidate peaks-significantly enhanced the accuracy of peak assignment. Isotopic pattern analysis revealed a close correspondence for 11 DBPs with clearly visible isotopologues in reference spectra, thereby further strengthening the confidence in the peak assignment of these DBPs. Brominated analogues were prevalent among the detected DBPs, possibly due to seawater intrusion. The fate, behavior, persistence, and toxicity of tentatively identified DBPs were assessed using EPI Suite™ and the CompTox Chemicals Dashboard. This revealed their significant toxicity to aquatic organisms, including developmental, mutagenic, and endocrine-disrupting effects in certain DBPs. Some DBPs also showed activity in various CompTox bioassays, implicating them in adverse molecular pathways. Additionally, 11 DBPs demonstrated high environmental persistence and resistance to biodegradation. This combined approach offers a powerful tool for future research and environmental monitoring, enabling accurate identification and assessment of DBPs and their potential risks.

Nontargeted Analysis of Coumarins in Source Water and Their Formation of Chlorinated Coumarins as DBPs in Drinking Water

Coumarin was detected as one of the most abundant compounds by nontargeted analysis of natural product components in actual water samples prior to disinfection. More importantly, prechlorination of humic acid generated 3-hydroxycoumarin and monohydroxy-monomethyl-substituted coumarin with a total yield of ≤10.1%, which suggested the humic substance in raw water is an important source of coumarins. 7-Hydroxycoumarin, 6-hydroxy-4-methylcoumarin, 6,7-dihydroxycoumarin, and 7-methoxy-4-methylcoumarin were identified in raw water by high-performance liquid chromatography-tandem high-resolution mass spectrometry because only some coumarin standards were commercially available. Their chlorination generated monochlorinated and polychlorinated coumarins, and their structures were confirmed by the synthesized standards. These products could form at various dosages of chlorine and pH levels, and some with a concentration of 600 ng/L can be stable in tap water for days. 3,6,8-Trichloro-7-hydroxycoumarin, 3-chloro-7-methoxy-4-methylcoumarin, and 3,6-dichloro-7-methoxy-4-methylcoumarin were first identified in finished water with concentrations of 0.0670, 78.1, and 14.7 ng/L, respectively, but not in source water, suggesting that they are new DBPs formed during disinfection. The cytotoxicity of 3-chloro-7-methoxy-4-methylcoumarin in CHO-K1 cells was comparable to those of 2,6-dibromo-1,4-benzoquinone and 2,6-dichloro-1,4-benzoquinone in TIC-Tox analyses, suggesting that further investigation of their occurrence and control in drinking water systems is warranted.

Chlorination of antiviral drug ribavirin: Kinetics, nontargeted identification, and concomitant toxicity evolution

Residual antiviral drugs in wastewater may increase the risk of generating transformation products (TPs) during wastewater treatment. Therefore, chlorination behavior and toxicity evolution are essential to understand the secondary ecological risk associated with their TPs. Herein, chlorination kinetics, transformation pathways, and secondary risks of ribavirin (RBV), one of the most commonly used broad-spectrum antivirals, were investigated. The pH-dependent second-order rate constants k increased from 0.18 M-1·s-1 (pH 5.8) to 1.53 M-1·s-1 (pH 8.0) due to neutral RBV and ClO- as dominant species. 12 TPs were identified using high-resolution mass spectrometry in a nontargeted approach, of which 6 TPs were reported for the first time, and their chlorination pathways were elucidated. The luminescence inhibition rate of Vibrio fischeri exposed to chlorinated RBV solution was positively correlated with initial free active chlorine, probably due to the accumulation of toxic TPs. Quantitative structure-activity relationship prediction identified 7 TPs with elevated toxicity, concentrating on developmental toxicity and bioconcentration factors, which explained the increased toxicity of chlorinated RBV. Overall, this study highlights the urgent need to minimize the discharge of toxic chlorinated TPs into aquatic environments and contributes to environmental risk control in future pandemics and regions with high consumption of antivirals.

Photochemical Transformation of Dissolved Organic Matter in Surface Water Augmented the Formation of Disinfection Byproducts

Sunlight may lead to changes in disinfection byproducts (DBPs) formation potentials of source water via transforming dissolved organic matter (DOM); however, the underlying mechanisms behind these changes remain unclear. This work systematically investigated the effect of photochemical transformation of DOM from reservoir water (DOMRe) and micropolluted river water (DOMRi) after 36 h of simulated sunlight irradiation (equivalent to one month under natural sunlight) on DBPs formation. Upon irradiation, high molecular weight (MW) and aromatic molecules tended to be mineralized or converted into low-MW and highly oxidized (O/C > 0.5) ones which might react with chlorine to generate high levels of DBPs, resulting in an elevation in the yields (μg DBP/mg C) of almost all the measured DBPs and the quantities of unknown DBPs in both DOM samples after chlorination. Additionally, DOMRi contained more aromatic molecules susceptible to photooxidation than DOMRe. Consequently, irradiated DOMRi exhibited a greater increase in the formation potentials of haloacetonitriles, halonitromethanes, and specific regulated DBPs, with nitrogenous DBPs being responsible for the overall rise in the calculated cytotoxicity following chlorination. This work emphasized the importance of a comprehensive removal of phototransformation products that may serve as DBPs precursors from source waters, especially from micropolluted source waters.

ChloroDBPFinder: Machine Learning-Guided Recognition of Chlorinated Disinfection Byproducts from Nontargeted LC-HRMS Analysis

High-resolution mass spectrometry (HRMS) is a prominent analytical tool that characterizes chlorinated disinfection byproducts (Cl-DBPs) in an unbiased manner. Due to the diversity of chemicals, complex background signals, and the inherent analytical fluctuations of HRMS, conventional isotopic pattern (37Cl/35Cl), mass defect, and direct molecular formula (MF) prediction are insufficient for accurate recognition of the diverse Cl-DBPs in real environmental samples. This work proposes a novel strategy to recognize Cl-containing chemicals based on machine learning. Our hierarchical machine learning framework has two random forest-based models: the first layer is a binary classifier to recognize Cl-containing chemicals, and the second layer is a multiclass classifier to annotate the number of Cl present. This model was trained using ∼1.4 million distinctive MFs from PubChem. Evaluated on over 14,000 unique MFs from NIST20, this machine learning model achieved 93.3% accuracy in recognizing Cl-containing MFs (Cl-MFs) and 92.9% accuracy in annotating the number of Cl for Cl-MFs. Furthermore, the trained model was integrated into ChloroDBPFinder, a standalone R package for the streamlined processing of LC-HRMS data and annotating both known and unknown Cl-containing compounds. Tested on existing Cl-DBP data sets related to aspartame chlorination in tap water, our ChloroDBPFinder efficiently extracted 159 Cl-containing DBP features and tentatively annotated the structures of 10 Cl-DBPs via molecular networking. In another application of a chlorinated humic substance, ChloroDBPFinder extracted 79 high-quality Cl-DBPs and tentatively annotated six compounds. In summary, our proposed machine learning strategy and the developed ChloroDBPFinder provide an advanced solution to identifying Cl-containing compounds in nontargeted analysis of water samples. It is freely available on GitHub (https://github.com/HuanLab/ChloroDBPFinder).

Recent progress in identification of water disinfection byproducts and opportunities for future research

Numerous disinfection by-products (DBPs) are formed from reactions between disinfectants and organic/inorganic matter during water disinfection. More than seven hundred DBPs that have been identified in disinfected water, only a fraction of which are regulated by drinking water guidelines, including trihalomethanes, haloacetic acids, bromate, and chlorite. Toxicity assessments have demonstrated that the identified DBPs cannot fully explain the overall toxicity of disinfected water; therefore, the identification of unknown DBPs is an important prerequisite to obtain insights for understanding the adverse effects of drinking water disinfection. Herein, we review the progress in identification of unknown DBPs in the recent five years with classifications of halogenated or nonhalogenated, aliphatic or aromatic, followed by specific halogen groups. The concentration and toxicity data of newly identified DBPs are also included. According to the current advances and existing shortcomings, we envisioned future perspectives in this field.

Nontarget Analysis and Comprehensive Characterization of Iodinated Polyfluoroalkyl Acids in Wastewater and River Water by LC-HRMS with Cascade Precursor-Ion Exclusions and Algorithmic Approach

Poly- and perfluoroalkyl acids (PFAAs) are a large family of widespread contaminants of worldwide concern and well-known as "forever chemicals". Direct emission of PFAAs from the fluorochemical industry is a crucial source of PFAA pollutants in the environment. This study implemented nontarget analysis and comprehensive characterization for a category of new PFAA contaminants, i.e., iodinated PFAAs (IPFAAs), in fluorochemical industry wastewater and relevant contaminated river water by liquid chromatography-high-resolution mass spectrometry with a cascade precursor ion exclusion (PIE) strategy and in-house developed data extraction and processing algorithms. A total of 26 IPFAAs (including 2 isomers of an IPFAA) were found and identified with tentative molecular structures. Semiquantification of the IPFAAs was implemented, and the total concentrations of IPFAAs were 0.16-285.52 and 0.15-0.17 μg/L in wastewater and river water, respectively. The high concentrations in association with the predicted ecotoxicities and environmental behaviors demonstrate that these IPFAAs are worthy of more concern and further in-depth research. The cascade PIE strategy along with the data extraction and processing algorithms can be extended to nontarget analysis for other pollutants beyond IPFAAs. The nontarget identification and characterization outcomes provide new understanding on the environmental occurrence and pollution status of IPFAAs from a comprehensive perspective.

Effects of dissolved organic matter removal and molecular transformation in different water treatment processes on formation of disinfection byproducts

Alterations in molecular composition of dissolved organic matter (DOM) during water treatments can influence the composition and toxicity of disinfection by-products (DBPs) in subsequent chlorination disinfection process. In this study, the impacts of DOM composition after various water treatment techniques (coagulation, adsorption, nanofiltration, biological aerated filter (BAF), and their integrated processes) on the generation mechanisms of DBPs were comprehensively explored by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) in combination with GC-MS and LC-MS analysis. The results indicated that coagulation preferentially removed unsaturated (low H/C) and oxidized (high O/C) compounds, whereas adsorption was prone to remove the reduced (low O/C) component that was more reactive with chlorine, leading to lower yields (μg DBP/mg DOC) of trihalomethanes (THMs) and haloacetic acids (HAAs) during subsequent chlorination. The coagulation-adsorption technique exhibited a relatively high removal of both known and unknown DBPs, demonstrating that coagulation and adsorption were complementary for DOM removal at the molecular level. Nanofiltration selectively removed molecules with relatively high O/C, however, those with very low O/C that were more reactive with chlorine could pass through the nanofiltration membrane, resulting in the highest yields of THMs and HAAs. Although BAF was inefficient in removing DBPs precursors, it could convert molecules with low degree of oxidation and unsaturation into highly oxidized and unsaturated ones, thereby significantly enhancing the removal of DBPs precursors in the subsequent coagulation-adsorption process. These findings are instrumental in developing and selecting more effective techniques to minimize the formation of DBPs in water treatment.

UV/chlorine and chlorination of effluent organic matter fractions: Tracing nitrogenous DBPs using FT-ICR mass spectrometry

UV/chlorine process is a promising advanced treatment to eliminate pathogen and remove refractory micropollutants for reclamation of municipal secondary effluent. However, effluent organic matter (EfOM) featuring high organic nitrogen content serves as a potential precursor for nitrogenous disinfection byproducts (N-DBPs) of health concern. The molecular-level alteration of a hydrophobic (HPO) EfOM fraction and a transphilic (TPI) EfOM fraction isolated from the same municipal effluent and the formation of N-DBPs in the UV/chlorine were tracked by ultrahigh-resolution mass spectrometry. Compared with chlorination, UV/chlorine induced a significantly greater modification on the molecular composition of EfOM and resulted in formation of unique formulae and chlorinated molecules with higher degree of oxidation, lower aromaticity, and less carbon number due to the involvement of reactive radical species. For both EfOM fractions, UV/chlorine formed more diverse DBPs with higher intensity and Cl-incorporation than chlorination. The TPI fraction of EfOM characterized by higher O/C and N/C ratios generated more N-DBPs with higher intensity clustered in the high O/C region than the HPO fraction of EfOM by both UV/chlorine and chlorination. Totally, 207 and 117 nitrogen-containing chlorinated formulae were recorded after UV/chlorine treatment of TPI and HPO, respectively. Precursor tracking found a greater number of DBPs were originated from raw EfOM through electrophilic substitution pathway rather than chlorine addition. Toxicity bioassays demonstrated that DBPs can trigger oxidative stress-induced DNA damage, while HPO fraction of EfOM dominated the induction of cytotoxicity. However, no correlation could be established between the diversity/abundance of N-DBPs and the level of DNA damage. A total of 22 DBPs with a significant rank correlation with DNA damage were identified, while C₈H₆O₅NCl was found as the N-DBP with the strongest correlation. The potential toxic chlorine-containing formula with the most abundant intensity was assigned to C₅HO₃Cl₃. This study suggests that the character and transformation of EfOM and associated toxicity is critical to evaluate the UV/chlorine process toward practical application.

First Discovery of Iodinated Polyfluoroalkyl Acids by Nontarget Mass-Spectrometric Analysis and Iodine-Specific Screening Algorithm

Per- and polyfluoroalkyl acids (PFAAs) including polyfluoroalkyl carboxylic acids and polyfluoroalkyl sulfonic acids are a large category of crucial environmental pollutants of global concern. Besides known PFAAs, numerous unknown species may exist in the environment, urgently needing discovery and characterization. This study implemented nontarget analysis for a group of novel PFAA pollutants, viz., iodinated PFAAs (I-PFAAs) in wastewater from a fluorochemical manufacturing park by liquid chromatography-high-resolution mass spectrometry in combination with an iodine-specific data-processing algorithm. The algorithm took into account the diagnostic fragment iodine ion (I-) together with carbon and sulfur isotopologue distributions. In total, 18 I-PFAA formulas involving 21 congeners were identified. Semiquantification was conducted, and the total concentrations of I-PFAAs were 1.9-274.7 μg/L, indicating severe pollution of I-PFAAs in the wastewater. The determined concentrations along with predicted environmental behaviors and toxicities demonstrate that I-PFAAs merit further in-depth investigation. The analytical method including the instrumental analysis and data-processing algorithm can be extended to screening and identification of I-PFAAs in other matrices. Furthermore, the analysis results for the first time provide recognition on the occurrence, distribution features, and pollution status of I-PFAAs in the environment.

Halohydroxybenzonitriles as a new group of halogenated aromatic DBPs in drinking water: Are they of comparable risk to halonitrophenols?

Halogenated aromatic disinfection byproducts (DBPs) exhibited similar total organic halogen levels in chlorinated drinking water samples as compared with aliphatic ones, and they predominantly accounted for the overall toxicity of the samples. Among the reported halogenated aromatic DBPs, halonitrophenols (HNPs) have received particular attention in recent years due to the relatively high risk in drinking water. In this study, a new group of halogenated aromatic DBPs were detected and then proposed to be halohydroxybenzonitriles (HHBNs) by employing the ultra-performance liquid chromatography/tandem mass spectrometers. Thereafter, the specific HHBN species in drinking water were theoretically speculated and then thoroughly identified with standard compounds. Their occurrence in drinking water was investigated, their cytotoxicity was evaluated, and their stability in the presence of chlorine was assessed. Seven newly identified HHBNs, including 3,5-dichloro-4-hydroxybenzonitrile, 3,5-dichloro-2-hydroxybenzonitrile, 5-bromo-3-chloro-4-hydroxybenzonitrile, 5-bromo-3-chloro-2-hydroxybenzonitrile, 3,5-dibromo-4-hydroxybenzonitrile, 3,5-dibromo-2-hydroxybenzonitrile, and 3,5-diiodo-4-hydroxybenzonitrile, showed 100% detection frequency in the collected drinking water samples with concentrations up to 36 ng/L. HHBNs exhibited significantly higher cytotoxicity in Chinese hamster ovary cells than regulated DBPs (e.g., trihalomethanes and haloacetic acids), which might be contributed by their cellular uptake efficiency and nucleophilicity. The seven HHBNs were proved to undergo transformation during chlorination following pseudo-first-order decay with half-lives in the range of 9-63 h. More importantly, in comparison to HNPs, which showed relatively high toxicity and strong stability among the halogenated aromatic DBPs, HHBNs presented comparable concentration-cytotoxicity contribution (50%) and slightly weaker stability (43%), suggesting that HHBNs should be a new group of DBPs of concern in drinking water.

Formation of chlorinated halobenzoquinones during chlorination of free aromatic amino acids

Chlorinated halobenzoquinones (HBQs) widely exist in drinking water as emerging disinfection byproducts (DBPs), which have attracted significant attention due to their wide occurrence and high toxicity. In this study, the formation of chlorinated HBQs from the three free aromatic amino acids, tryptophan (Trp), tyrosine (Tyr) and phenylalanine (Phe), during chlorination was investigated, the formation pathways of chlorinated HBQs were explained based on the detected intermediates and influence factors. The results revealed that four chlorinated HBQs, including 2,6-dichloro-1,4-benzoquinone (2,6-DCBQ), 2,3,5-trichloro-1,4-benzoquinone, 2,3,5,6-tetrachloro-1,4-benzoquinone and 2,6-dichloro-3-methyl-1,4-benzonquinone, were formed in chlorination of the three free aromatic amino acids, and 2,6-DCBQ was the dominant species among the formed chlorinated HBQs. Of the three free aromatic amino acids, Trp and Tyr presented relatively high yields of chlorinated HBQs than Phe. Moreover, ten intermediates were successfully detected (e.g., N,2-dichloroaniline from Trp, 2,4,6-trichlorophenol from Tyr) according to the isotope and fragment information obtained using high resolution mass spectrometry. The formation pathways of chlorinated HBQs from Trp and Tyr were proposed to include electrophilic addition, electrophilic substitution, oxidation, deacidification and dehydration reaction, and further validated using theoretical calculation. The yields of chlorinated HBQs during chlorination of the free aromatic amino acids were significantly affected by free chlorine dosage, pH and temperature.

Effects of chlorine dose on the composition and characteristics of chlorinated disinfection byproducts in reclaimed water

During chlorination of reclaimed water, the dose of chlorine used can influence the formation of chlorinated disinfection by-products (Cl-DBPs). We used non-targeted screening by Orbitrap mass spectrometry to identify Cl-DBPs in samples of chlorinated reclaimed water, and found that chlorination was likely to form slightly oxidized unsaturated aliphatic compounds and polycyclic aromatic compounds. Increasing the chlorine dose increased the proportion of polycyclic aromatic Cl-DBPs containing one chlorine atom (Cl₁-DBPs) and highly oxidized unsaturated aliphatic Cl-DBPs containing two chlorine atoms (Cl₂-DBPs). In addition, increasing the chlorine dose first decreased and then increased the proportion of Cl₁-DBPs with aromatic index values >0.5 and increased the proportion of Cl₂-DBPs with aromatic index values <0.5. Increasing the chlorine dose increased double bond equivalent minus oxygen values of Cl₁-DBPs and decreased the double bond equivalent minus oxygen values of Cl₂-DBPs, while the nominal oxidant state of carbon decreased for Cl₁-DBPs and increased for Cl₂-DBPs. In considering the possible precursors of Cl-DBPs and their reaction pathways, substitution reactions occurred more readily with aliphatic compounds and addition reactions occurred more readily with aromatic precursors. When the chlorine dose is increased, more Cl₂-DBPs may be formed by substitution. Overall, the chlorine dose influences Cl-DBP formation and composition and should be taken into account during water treatment.

Novel chlorinated disinfection byproducts from tannic acid: nontargeted identification, formation pathways, and computationally predicted toxicity

Tannic acid is ubiquitously present in various simulated and real water sources and in wastewater. Various chlorinated disinfection byproducts (Cl-DBPs) are generated via reactions with tannic acid during disinfection with chlorine. We used high-resolution mass spectrometry in combination with our self-developed halogen extraction code to selectively identify Cl-DBPs. Our strategy enabled successful detection of 35 Cl-DBP formulas formed by chlorination of tannic acid, and we identified 26 of these structures. The structures of 17 novel Cl-DBPs are firstly reported here. The reaction pathways of these Cl-DBPs were tentatively proposed. These Cl-DBPs are likely to be generated during chlorination at various chlorine doses, from 0.0 to 10.0 mg-Cl₂/L, and 14 of the 26 Cl-DBPs were detected in simulated drinking water, which implies a relatively high probability of incidence. Quantitative structure-activity relationship toxicity analyses predicted that most of these Cl-DBPs would exhibit much higher acute toxicity than the common DBPs trichloromethane and monochloroacetic acid and that some of these compounds would induce developmental toxicity and be mutagenic, which further emphasizes that these Cl-DBPs should raise concerns. This study broadens our understanding of the Cl-DBPs formed from tannic acid and should prompt wider application of our analytical strategy in environmental matrices.

Identification of unknown disinfection byproducts in drinking water produced from Taihu Lake source water

Although disinfection byproducts (DBPs) in drinking water have been suggested as a cancer causing factor, the causative compounds have not yet been clarified. In this study, we used liquid chromatography quadrupole-time-of-flight spectrometry (LC-QTOF MS) to identify the unknown disinfection byproducts (DBPs) in drinking water produced from Taihu Lake source water, which is known as a convergence point for the anthropogenic pollutants discharged from intensive industrial activities in the surrounding regions. In total, 91 formulas of DBPs were discovered through LC-QTOF MS nontarget screen, 81 of which have not yet been reported. Among the 91 molecules, 56 only contain bromine, 15 only contain chlorine and 20 DBPs have both bromine and chlorine atoms. Finally, five DBPs including 2,4,6-tribromophenol, 2,6-dibromo-4-chlorophenol, 2,6-dichloro-4-bromophenol, 4-bromo-2,6-di-tert-butylphenol and 3,6-dibromocarbazole were confirmed using standards. The former three compounds mainly formed in the predisinfection step (maximum concentration, 0.2-2.6 µg/L), while the latter two formed in the disinfection step (maximum concentration, 18.2-33.6 ng/L). In addition, 19 possible precursors of the discovered DBPs were detected, with the aromatic compounds being a major group. 2,6-di-tert-butylphenol as the precursor of 4-bromo-2,6-di-tert-butylphenol was confirmed with standard, with a concentration of 20.3 µg/L in raw water. The results of this study show that brominated DBPs which are possibly formed from industrial pollutants are relevant DBP species in drinking water produced form Taihu source water, suggesting protection of Taihu Lake source water is important to control the DBP risks.

Combining high resolution mass spectrometry with a halogen extraction code to characterize and identify brominated disinfection byproducts formed during ozonation

Ozonation is widely used during water treatment but can generate a variety of toxic disinfection byproducts, especially in the presence of bromide. In the present study, our halogen extraction code was extended and modified to identify bromine isotopic patterns and combined with the R package MFAssignR in selectively identifying brominated disinfection byproducts (Br-DBPs) from high resolution mass spectra. In total, 127 Br-DBPs formed from a Suwannee River natural organic matter (SRNOM) solution were successfully detected from tens of thousands of mass spectrometry peaks. Kendrick mass defect analysis and structural characterization identified 17 structures, 15 of which were identified as brominated carboxylic acids and firstly reported here. Computational model predictions indicated that these brominated carboxylic acids may possess high toxic potencies and raise valid concerns. The adapted halogen extraction code described in this study is a powerful tool for a wider application of analyzing Br-DBPs in complex water matrices and provides an effective technique to characterize and identify these compounds in future studies.

Nontargeted identification of chlorinated disinfection byproducts formed from natural organic matter using Orbitrap mass spectrometry and a halogen extraction code

Natural organic matter is a major source of precursors of hazardous chlorinated disinfection byproducts (Cl-DBPs) formed during water treatment, but the majority of Cl-DBPs are still unidentified. In this study, we used a self-written halogen extraction code to identify halogen isotopic patterns in combination with the R package MFAssignR, to identify Cl-DBPs from Orbitrap mass spectra. One hundred and eighty-nine Cl-DBPs were detected during chlorination of a Suwannee River natural organic matter solution, and the structures of 20 of these compounds are reported for the first time. Kendrick mass defect analysis and structural identification confirmed that chlorinated carboxylic acids are common and likely to form during chlorination. A toxicity prediction using quantitative structure-activity relationship models indicated that most of the chlorinated carboxylic acids may be highly toxic. Our analytical strategy can identify Cl-DBPs accurately from complex mixtures and may also be applicable to the identification of other halogenated disinfection byproducts formed during water treatment.