Catalyst-free activation of permanganate under visible light irradiation for sulfamethazine degradation: Experiments and theoretical calculation

pH-modulated oxidation of organic pollutants for water decontamination: A deep insight into reactivity and oxidation pathway

Solution pH is one of the primary factors affecting the efficiency of water decontamination. Although the influence of pH on oxidants activation, catalyst activity, and reactive oxygen species have been widely explored, there is still a scarcity of systemic studies on the changes in the oxidation behavior of organic pollutants at different pH levels. Herein, we report the influence laws of pH on the forms, reactivities, active sites, degradation pathways, and products toxicities of organic pollutants. Changes in pH cause the protonation or deprotonation of organic pollutants and further affect their forms and chemistry (e.g., electrostatic force, hydrophobicity, and oxidation potential). The oxidation potential of organic pollutants follows the order: protonated form > pristine form > deprotonated form. Moreover, protonation or deprotonation can modify the active sites and degradation pathways of organic pollutants, wherein deprotonation renders them more susceptible to electrophilic attack, while protonation reduces their activity against electrophilic and nucleophilic attacks. Additionally, pH adjustments can modify the degradation pathway and the toxicity of transformation products. Overall, pH changes can affect the oxidation fate of organic pollutants by altering their structure, which distinguishes it from the effect of pH on oxidants or oxidant activation processes.

Production of activated carbon from agave residues and its synergistic application in a hybrid adsorption-AOPs system for effective removal of sulfamethazine from aqueous solutions

Tequila production in Mexico generates large quantities of agave bagasse (AB), a waste that could be used more efficiently. AB has a high cellulose, hemicellulose, and lignin content, which allows its use as a precursor for synthesizing carbonaceous materials. In the present work, the synthesis of activated carbon impregnated with Fe2+ (AG-Fe-II) and Fe3+ (AG-Fe-III) was carried out and evaluated in a hybrid adsorption-AOP (advanced oxidation process) methodology for sulfamethazine removal (SMT). The materials were characterized before and after the process to determine their morphological, textural, and physicochemical properties. Subsequently, the effect of the main operational variables (pH, initial SMT concentration, mass, and activator dosage) on the hybrid adsorption-degradation process was studied. The Fenton-like reaction was selected as the AOP for the degradation step, and potassium persulfate (K2S2O8) was used as an activating agent. The main iron crystallographic phases in AG-Fe-II were FeS, with a uniform distribution of iron particles over the material's surface. The main crystallographic phase for AG-Fe-III was Fe3O4. The hybrid process achieved 61% and 78% removal efficiency using AG-Fe-II and AG-Fe-III samples, respectively. The pH and initial SMT concentration were the most critical factors for removing SMT from an aqueous phase. Finally, the material was successfully tested in repeated adsorption-degradation cycles.

Kinetics and mechanism analysis of advanced oxidation degradation of PFOA/PFOS by UV/Fe3+ and persulfate: A DFT study

UV/Fe3+ and persulfate are two promising advanced oxidative degradation systems for in situ remediation of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), yet a lack of comprehensive understanding of the degradation mechanisms. For the first time, we used density functional theory (DFT) to calculate the entire reaction pathways of the degradation of PFOA/PFOS in water by UV/Fe3+ and persulfate. In addition, we have deeply explored the different attack pathways driven by •OH and SO4-•, and found that SO4-• determines PFOA/PFOS to obtain PFOA/PFOS free radicals through single electron transfer to initiate the degradation reaction, while •OH determines the speed of PFOA/PFOS degradation reaction. Both degradation reactions were thermodynamically advantageous and kinetically feasible under calculated conditions. Based on the thermodynamic data, persulfate was found to be more favorable for the advanced oxidative degradation of Perfluorinated compounds (PFCs). Moreover, for SO4-• and •OH co-existing in the persulfate system, pH will affect the presence and concentration of these two types of free radicals, and low pH is not necessary for the degradation of PFOA/PFOS in the persulfate system. These results can considerably advance our understanding of the PFOA/PFOS degradation process in advanced oxidation processes (AOPs), which is driven by •OH and SO4-•. This study provides a DFT calculation process for the mechanism calculation of advanced oxidation degradation of other types of PFCs pollutants, hoping to elucidate the future development of PFCs removal. Further research should focus on determining the advanced oxidation degradation pathways of other types of PFCs, to support the development of computational studies on the advanced oxidation degradation of PFCs.

Tunable schiff-based networks with different bonding sites for enhanced photocatalytic activity under visible-light irradiation: The effects of steric hindrance

Organic polymers hold great potential in photocatalysis considering their low cost, structural tailorability, and well-controlled degree of conjugation for efficient electron transfer. Among the polymers, Schiff base networks (SNWs) with high nitrogen content have been noticed. Herein, a series of SNWs is synthesized based on the melamine units and dialdehydes with different bonding sites. The chemical and structural variation caused by steric hindrance as well as the related photoelectric properties of the SNW samples are investigated, along with the application exploration on photocatalytic degradation and energy production. The results demonstrate that only SNW-o based on o-phthalaldehyde responds to visible light, which extends to over 550 nm. SNW-o shows the highest tetracycline degradation rate of 0.02516 min-1, under 60-min visible light irradiation. Moreover, the H2O2 production of SNW-o is 2.14 times higher than that of g-C3N4. The enhanced photocatalytic activity could be ascribed to the enlarged visible light adsorption and intramolecular electron transfer. This study indicates the possibility to regulate the optical and electrical properties of organic photocatalysts on a molecular level, providing an effective strategy for rational supramolecular engineering to the applications of organic materials in photocatalysis.

AI-enhanced chemical paradigm: From molecular graphs to accurate prediction and mechanism

The development of accurate and interpretable models for predicting reaction constants of organic compounds with hydroxyl radicals is vital for advancing quantitative structure-activity relationships (QSAR) in pollutant degradation. Methods like molecular descriptors, molecular fingerprinting, and group contribution methods have limitations, as traditional machine learning struggles to capture all intramolecular information simultaneously. To address this, we established an integrated graph neural network (GNN) with approximately 12 million learnable parameters. GNN represents atoms as nodes and chemical bonds as edges, thus transforming molecules into a graph structures, effectively capturing microscopic properties while depicting atom connectivity in non-Euclidean space. Our datasets comprise 1401 pollutants to develop an integrated GNN model with Bayesian optimization, the model achieves root mean square errors of 0.165, 0.172, and 0.189 on the training, validation, and test datasets, respectively. Furthermore, we assess molecular structure similarity using molecular fingerprint to enhance the model's applicability. Afterwards, we propose a gradient weight mapping method for model explainability, uncovering the key functional groups in chemical reactions in artificial intelligence perspective, which would boost chemistry through artificial intelligence extreme arithmetic power.

Potassium permanganate oxidation enhanced by infrared light and its application to natural water

Photocoupled permanganate (PM) is an effective way to enhance the oxidation efficiency of PM, however, the activation of PM by infrared has received little attention. This study aimed to investigate the ability of infrared light to activate PM. When coupled with infrared, the degradation rate of 4-chlorophenol (4-CP) is increased to 3.54 times of PM oxidation alone. The accelerated reaction was due to the formation of vibrationally excited PM by absorbing 3.1 kJ mol-1 infrared energy, which also leads to the primary reactive intermediates Mn(V/IV) in the reaction system. The infrared coupled PM system also showed 1.14-2.34 times promotion effect on other organic pollutants. Furthermore, solar composed of 45% infrared, coupled PM system showed excellent degradation performance, where the degradation of 4-CP in 10 L of tap water and river water was 68 and 23 times faster than in ultrapure water, respectively. The faster-increased degradation rate in natural waters is mainly due to the abundant inorganic ions, which can stabilize the manganese species, and then has a positive effect on 4-CP degradation. In summary, this work develops a energy-efficient photoactivated PM technology that utilizes infrared and provides new insights into the design of novel sunlight-powered oxidation processes for water treatment.

Degradation of sulfonamide antibiotic via UV/MgO2 system: kinetic, application, and mechanism

In response to antibiotic residues in the water, a novel advanced oxidation technology based on MgO2 was used to remediate sulfamethazine (SMTZ) pollution in aquatic environments. Upon appropriate regulation, the remarkable removal efficiency of SMTZ was observed in a UV/MgO2 system, and the pseudo-first-order reaction constant reached 0.4074 min-1. In addition, the better performance of the UV/MgO2 system in a weak acid environment was discovered. During the removal of SMTZ, the pathways of SMTZ degradation were deduced, including nitration, ring opening, and group loss. In the mineralization exploration, the further removal of residual products of SMTZ by the UV/MgO2 system was visually demonstrated. The qualitative and quantitative researches as well as the roles of reactive species were valuated, which revealed the important role of ·O2-. Common co-existing substances in actual wastewater such as NO3- HA, Cl-, Fe2+, Co2+, and Mn2+ can slightly inhibit the degradation of SMTZ in the UV/MgO2 system. Finally, the capacity of efficient degradation of SMTZ in actual wastewater by the UV/MgO2 system was proved. The results indicated that the innovative UV/MgO2 system was of great practical application prospect in antibiotic residue wastewater remediation.

Enhanced photolysis of tetracycline by Zn(II): Role of complexation

Zn(II) is a necessary additive during antibiotic production and aquaculture, leading to the coexistence of Zn(II) and antibiotics in aquatic environment, especially in receiving waters of pharmaceutical and aquaculture wastewater. However, the roles of Zn(II) in the photochemical behavior of antibiotics are still not clear, which limits the understanding of the fate of antibiotic in nature. In this study, tetracycline (TC) was selected as typical antibiotic to evaluate the effect of Zn(II) on antibiotic photolysis. The removal of TC was accelerated by 22.75 % with TC:Zn(II) molar ratio at 1:5. The mechanism of Zn(II)-induced TC photolysis was explored via reactive oxygen species (ROS) analysis and density functional theory (DFT) calculation for the first time. Zn(II) could enhance the formation of TC excited states and further produce more singlet oxygen (12.54 % higher than control group) to promote indirect photolysis. Besides, Zn(II) could react with TC via complexation, and the complex was more vulnerable to attack by reactive oxygen species due to more active sites. Furthermore, the structure and toxicity of intermediates were identified with mass spectrometer, T.E.S.T. and ECOSAR software. Zn(II) hardly changed the degradation path of TC, and TC was mainly degraded via ring opening, demethylation, deamidation, and hydrogen abstraction with more toxic intermediates than the parent molecule. This work is significant to better understand the environmental fate of antibiotics, and also provides new insight into wastewater treatment in the pharmaceutical and aquaculture industry.

Review on impacts of micro- and nano-plastic on aquatic ecosystems and mitigation strategies

The rapid proliferation of microplastics (MPs) and nanoplastics (NPs) in our environment presents a formidable hazard to both biotic and abiotic components. These pollutants originate from various sources, including commercial production and the breakdown of larger plastic particles. Widespread contamination of the human body, agroecosystems, and animals occurs through ingestion, entry into the food chain, and inhalation. Consequently, the imperative to devise innovative methods for MPs and NPs remediation has become increasingly apparent. This review explores the current landscape of strategies proposed to mitigate the escalating threats associated with plastic waste. Among the array of methods in use, microbial remediation emerges as a promising avenue for the decomposition and reclamation of MPs and NPs. In response to the growing concern, numerous nations have already implemented or are in the process of adopting regulations to curtail MPs and NPs in aquatic habitats. This paper aims to address this gap by delving into the environmental fate, behaviour, transport, ecotoxicity, and management of MPs and NPs particles within the context of nanoscience, microbial ecology, and remediation technologies. Key findings of this review encompass the intricate interdependencies between MPs and NPs and their ecosystems. The ecological impact, from fate to ecotoxicity, is scrutinized in light of the burgeoning environmental imperative. As a result, this review not only provides an encompassing understanding of the ecological ramifications of MPs and NPs but also highlights the pressing need for further research, innovation, and informed interventions.

Green polyaspartic acid as a novel permanganate activator for enhanced degradation of organic contaminants: Role of reactive Mn(III) species

Attention has been long focused on enhancing permanganate (Mn(VII)) oxidation capacity for eliminating organic contaminants via generating active manganese intermediates (AMnIs). Nevertheless, limited consideration has been given to the unnecessary consumption of Mn(VII) due to the spontaneous disproportionation of AMnIs during their formation. In this work, we innovatively introduced green polyaspartic acid (PASP) as both reducing and chelating agents to activate Mn(VII) to enhance the oxidation capacity and utilization efficiency of Mn(VII). Multiple lines of evidence suggest that Mn(III), existing as Mn(III)-PASP complex, was generated and dominated the degradation of bisphenol A (BPA) in the Mn(VII)/PASP system. The stabilized Mn(III) species enabled Mn(VII) utilization efficiency in the Mn(VII)/PASP system to be higher than that in Mn(VII) alone. Moreover, the electrophilic Mn(III) species was verified to mainly attack the inclusive benzene ring and isopropyl group to realize BPA oxidation and its toxicity reduction in the Mn(VII)/PASP system. In addition, the Mn(VII)/PASP system showed the potential for selectively oxidizing organic contaminants bearing phenol and aniline moieties in real waters without interference from most of coexisting water matrices. This work brightens an overlooked route to both high oxidation capacity and efficient Mn(VII) utilization in the Mn(VII)-based oxidation processes.

Toxicity evolution and control for the UV/H2O2 degradation of nitrogen-containing heterocyclic compounds: SDZ and PMM

This study aimed to achieve toxicity control of sulfadiazine (SDZ) and pirimiphos-methyl (PMM) via the UV/H2O2 process by optimizing the reaction parameters. The results show that both drugs had a good degradation effect under the following parameters: a H2O2 molar ratio of 1:200, and neutral conditions. SDZ and PMM could be degraded by more than 99% within 3 min, respectively. In the Daphnia magna acute toxicity assay and Vibrio fischeri inhibition assay, both SDZ and PMM exhibited a phenomenon of increasing toxicity. Additionally, through the use of density functional theory (DFT) calculation and HPLC-QTOF-MS, 21 transformation products (TPs) were identified, and the principal degradation pathways were proposed. The toxicity of the TPs was determined by comparing the QSAR prediction results with toxicity test data. As a result, under the higher UV light intensity (2300 μW/cm2) and neutral conditions, SDZ showed highest toxicity, whereas PMM showed lowest toxicity under the lowest UV light intensity (450 μW/cm2) and neutral conditions. Four main toxic TPs were identified, and their yields could be reduced by adjusting the reaction parameters. Therefore, the selection of appropriate reaction parameters could reduce the production of toxic TPs and ensure the safety of water environment.

Degradation of Sulfamethoxazole by Manganese(IV) Oxide in the Presence of Humic Acid: Role of Stabilized Semiquinone Radicals

In this work, we demonstrate for the first time the abatement of sulfamethoxazole (SMX) induced by stabilized ortho-semiquinone radicals (o-SQ•-) in the MnO2-mediated system in the presence of humic acid. To evaluate the performance of different MnO2/mediator systems, 16 mediators are examined for their effects on MnO2 reactions with SMX. The key role of the bidentate Mn(II)-o-SQ• complex and MnO2 surface in stabilizing SQ•- is revealed. To illustrate the formation of the Mn(II)-o-SQ• complex, electron spin resonance, cyclic voltammetry, and mass spectra were used. To demonstrate the presence of o-SQ• on the MnO2 surface, EDTA was used to quench Mn(II)-o-SQ•. The high stability of o-SQ•- on the MnO2 surface is attributed to the higher potential of o-SQ•- (0.9643 V) than the MnO2 surface (0.8598 V) at pH 7.0. The SMX removal rate constant by different stabilized o-SQ• at pH 7.0 ranges from 0.0098 to 0.2252 min-1. The favorable model is the rate constant ln (kobs, 7.0) = 6.002EHOMO(o-Qred) + 33.744(ELUMO(o-Q) - EHOMO(o-Qred)) - 32.800, whose parameters represent the generation and reactivity of o-SQ•, respectively. Moreover, aniline and cystine are competitive substrates for SMX in coupling o-SQ•-. Due to the abundance of humic constituents in aquatic environments, this finding sheds light on the low-oxidant-demand, low-carbon, and highly selective removal of sulfonamide antibiotics.

Insights into the carbon nanotubes-mediated activation of permanganate for decontamination under high salinity

Radical-based advanced oxidation process (AOPs) has attracted great interests in wastewater treatment field. However, by the traditional radical-based method, the degradation of organic pollution is greatly suppressed when radicals react with the co-existing anions in the solution. Herein, an efficient method for degrading of contaminant under high salinity conditions is discussed through a non-radical pathway. Carbon nanotubes (CNTs) was employed as an electron transfer medium to facilitate the electron conversion from contaminants to potassium permanganate (PM). Based the results of quenching experiments, probe experiments, and galvanic oxidation process experiments, the degradation mechanism of CNTs/PM process was demonstrated to be electron transfer, rather than reactive intermediate Mn species. As a result, typical influencing factors including salt concentration, cations, and humic acid have less of an impact on degradation during CNTs/PM processes. In addition, the CNTs/PM system exhibits superior reusability and universality of pollutants, which has the potential to be applied as a non-radical pathway for the purification of contaminant in the large-scale high salinity wastewater treatment.

Pd/MIL-100(Fe) as hydrogen activator for FeIII/FeII cycle: Fenton removal of sulfamethazine

Masses of iron sludge generated from engineering practice of classic Fenton reaction constraints its further promotion. Accelerating the FeIII/FeII cycle may be conducive to reducing the initial ferrous slat dosage and the final iron sludge. Based on the reduction of Pd/MIL-100(Fe)-activated hydrogen, an improved Fenton system named MHACF-MIL-100(Fe) was developed at ambient temperature and pressure. 97.8% of sulfamethazine, the target pollutant in this work, could be degraded in 5 min under the conditions of 20 mM H2O2, 25 μM ferrous chloride, initial pH 3.0, 2 g·L-1 composite catalyst Pd/MIL-100(Fe) and hydrogen gas 60 mL·min-1. Combining density functional theory (DFT) calculation and intermediate detection, the degradation of this antibiotic was inferred to start from the cleavage of N-S bond. The catalytic of Pd/MIL-100(Fe), demonstrated by the removal efficiency of SMT and the catalyst morphology, remained intact after six reaction cycles. The present study provides an insight into the promotion of Fenton reaction.

Permanganate activation with Mn oxides at different oxidation states: Insight into the surface-promoted electron transfer mechanism

The development of new strategies to improve the removal of organic pollutants with permanganate (KMnO₄) is a hot topic in water treatment. While Mn oxides have been extensively used in Advanced Oxidation Processes through an electron transfer mechanism, the field of KMnO₄ activation remains relatively unexplored. Interestingly, this study has discovered that Mn oxides with high oxidation states including γ-MnOOH, α-Mn₂O₃ and α-MnO₂, exhibited excellent performance to degrade phenols and antibiotics in the presence of KMnO₄. The MnO₄^- species initially formed stable complexes with the surface Mn(III/IV) species and showed an increased oxidation potential and electron transfer reactivity, caused by the electron-withdrawing capacity of the Mn species acting as Lewis acids. Conversely, for MnO and γ-Mn₃O₄ with Mn(II) species, they reacted with KMnO₄ to produce cMnO₂ with very low activity for phenol degradation. The direct electron transfer mechanism in α-MnO₂/KMnO₄ system was further confirmed through the inhibiting effect of acetonitrile and the galvanic oxidation process. Moreover, the adaptability and reusability of α-MnO₂ in complicated waters indicated its potential for application in water treatment. Overall, the findings shed light on the development of Mn-based catalysts for organic pollutants degradation via KMnO₄ activation and understanding of the surface-promoted mechanism.

Insight into mechanochemical destruction of PFOA by BaTiO3: An electron-dominated reduction process

Perfluorooctanoic acid (PFOA) is a representative persistent organic pollutant and its disposal by mechanochemical (MC) technology emerges in recent years. However, degradation mechanism of PFOA especially rupture of C-F bonds during MC process is still unclear. Therefore, we innovatively employed barium titanate as co-milling reagent in MC system to disclose an electron-dominated reduction process. By stimulating piezoelectric effect of BaTiO₃ under MC impact, free electrons were generated. The results implied more than 95.00% degradation and 60.00% defluorination efficiency were obtained after 6 h' ball milling. DPPH• was used as probe to confirm the existence of piezo-excited electrons, which were further verified to be major reactive species by atmosphere experiments. Thus, PFOA destruction was dominated by reduction process, characterizing by breakage of C-F bonds induced by electrons. Accordingly, the fate of organic fluorides was explored and BaF₂ was identified as final product. The cleavage of carboxyl group initiated PFOA decomposition, following by successive removal of CF₂ groups and elimination of F^-. Moreover, the practical experiments and reusable trials implied promising application of this method. Overall, this paper provides a novel perspective for reductive decomposition of PFOA by MC technology and reveals the major role of electrons during reaction process.

Fulvic acid enhanced peroxymonosulfate activation over Co-Fe binary metals for efficient degradation of emerging bisphenols

Bisphenol F (BPF) and bisphenol S (BPS) are emerging bisphenols, which have become the main substitutes for bisphenol A (BPA) in industrial production and are also considered as new environmental pollution challenges. Thus, the necessity for an effective approach to remove BPF and BPS is essential. In this study, fulvic acid (FA) was used to modify Co-Fe binary metals (CFO) for peroxymonosulfate (PMS) activation. The characterization results demonstrated that CFO changed significantly in morphology after compounding with FA, with smaller particle size and 5.6 times larger specific surface area, greatly increasing the active sites of catalyst; Moreover, humic acid-like compounds increased the surface functional groups of CFO, especially phenolic hydroxyl, which could effectively prolong the PMS activation. The concentration of all reactive species, such as SO₄•^-, •OH, O₂•^-, and ¹O₂ increased in FA@CFO/PMS system. As a result, the degradation efficiency of CFO for both BPF and BPS was significantly improved after compounding FA, which also had a wide range of pH applications. The degradation pathways of both BPF and BPS were proposed based on liquid chromatography-mass spectrometry (LC-MS) analysis and the density functional theory (DFT) calculations. Our findings are expected to provide new strategies and methods for remediation of environmental pollution caused by emerging bisphenols.

Unveiling different antibiotic degradation mechanisms on dual reaction center catalysts with nitrogen vacancies via peroxymonosulfate activation

Metal-nitrogen-site catalysts are widely recognized as effective heterogeneous catalysts in peroxymonosulfate (PMS)-based advanced oxidation processes. However, the selective oxidation mechanism for organic pollutants is still contradictory. In this work, manganese-nitrogen active centers and tunable nitrogen vacancies were synchronously constructed on graphitic carbon nitride (LMCN) through l-cysteine-assisted thermal polymerization to reveal different antibiotic degradation mechanisms. Benefiting from the synergism of manganese-nitrogen bond and nitrogen vacancies, the LMCN catalyst exhibited excellent catalytic activity for the degradation of tetracycline (TC) and sulfamethoxazole (SMX) antibiotics with first-order kinetic rate constants of 0.136 min^-1 and 0.047 min^-1, which were higher than those of other catalysts. Electron transfer dominated TC degradation at low redox potentials, while electron transfer and high-valent manganese (Mn (V)) were responsible for SMX degradation at high redox potentials. Further experimental studies unveiled that the pivotal role of nitrogen vacancies is to promote electron transfer pathway and Mn(V) generation, while nitrogen-coordinated manganese as the primary catalytic active site determines Mn(V) generation. In addition, the antibiotic degradation pathways were proposed and the toxicity of byproducts was analyzed. This work provides an inspiring idea for the controlled generation of reactive oxygen species by targeted activation of PMS.

Effects of activated carbon, biochar, and carbon nanotubes on the heterogeneous Fenton oxidation catalyzed by pyrite for ciprofloxacin degradation

Pyrite and engineering carbon materials have received increasing attention for their catalytic potential in Fenton reactions due to their extensive sources and low cost. However, effects of carbon materials on the degradation of pollutants by pyrite-catalyzed heterogeneous Fenton oxidation have not been fully understood. In this study, the performance of pyrite-catalyzed heterogeneous Fenton system on the degradation of ciprofloxacin (CIP) was investigated in the presence of activated carbon (AC), biochar (BC), and carbon nanotubes (CNTs). Synchronous and asynchronous experiments (adsorption and catalysis) were conducted to elucidate the roles of the carbon materials in pyrite-catalyzed Fenton reactions. The results demonstrated that all the three carbon materials accelerated the pyrite-catalyzed Fenton oxidation of CIP. Under the experimental conditions, the reaction rates, which were obtained by fitting the synchronous experimental results with the pseudo-first-order kinetic model, of pyrite/AC, pyrite/BC and pyrite/CNTs with H₂O₂ for the removal of CIP were 8.28, 3.40 and 3.37 times faster than that of pyrite alone. Adsorption experiments and characterization analysis showed that AC had a higher adsorption capacity than BC and CNTs for CIP, which enabled it to distinguish itself in assisting the pyrite-catalyzed Fenton oxidation. In the presence of the carbon materials, the adsorption effect should not be neglected when studying the catalytic performance of pyrite. Free radical quenching experiments and electron spin-resonance spectroscopy (ESR) were used to detect and identify free radical species in the reactions. The results showed that hydroxyl radicals (•OH) contributed significantly to the degradation of CIP. The addition of carbon materials promoted the production of •OH, which favored the degradation of CIP. The results of this study suggested that the synergistic effect of oxidation and adsorption promoted the removal of CIP in pyrite/carbon materials/H₂O₂ systems, and coupling pyrite and carbon materials shows great potential in treating antibiotic wastewater.

Oxidation of sulfamethazine by peracetic acid activated with biochar: Reactive oxygen species contribution and toxicity change

Peracetic acid (PAA) as an emerging oxidative has been concerned increasingly due to its high oxidation capacity and low byproducts formation potential. This study was to investigate the oxidation of sulfamethazine (SMZ) by PAA activated with activated biochar (ABC) after thermal modification. The results demonstrated that PAA could be effectively activated by ABC to degrade SMZ in a wide pH range (3-9), which followed the pseudo-second-order kinetics (R² > 0.99). Both non-radicals (singlet oxygen) and free radicals (alkoxy radicals, hydroxyl radicals) existed in the ABC/PAA system, and the degradation of SMZ was dominated by singlet oxygen. Humic acid (HA), SO₄^2- and HCO₃^- slightly inhibited the degradation of SMZ in the ABC/PAA process, while Cl^- and Br^- promoted the degradation of SMZ. The cleavage of S-N, S-C bond, and SO₂ extraction reaction rearrangement was the main oxidation process of SMZ. Meanwhile, the results of the ECOSAR program showed that the acute toxicity of most by-products was significantly reduced compared to SMZ, which revealed the potential applicability of the ABC/PAA process in the treatment of antibiotics pollution and their detoxification.

The fate of diclofenac in anaerobic fermentation of waste activated sludge

Diclofenac (DCF), a nonsteroidal anti-inflammatory drug, is one of the most commonly detected pharmaceuticals in wastewater treatment plants. However, the fate of DCF in waste activated sludge (WAS) anaerobic fermentation has not been well-understood so far. This work therefore aims to comprehensively reveal whether and how DCF is transformed in WAS mesophilic anaerobic fermentation through both experimental investigation and density functional theory (DFT) calculation. Experimental results showed that ∼28.8% and 45.8% of DCF were respectively degraded during the batch and long-term fermentation processes. Based on the detected intermediates and DFT-predicted active sites, three metabolic pathways, i.e., chlorination, hydroxylation, and dichlorination, responsible for DCF transformation were proposed. DFT calculation also showed that the Gibbs free energy (ΔG) of the three transformation pathways was respectively 19.0, -4.3, and -19.3 kcal/mol, suggesting that the latter two reactions (i.e., hydroxylation and dichlorination) were thermodynamically favorable. Illumina MiSeq sequencing analyses revealed that DCF improved the populations of complex organic degradation microbes such as Proteiniclasticum and Tissierellales, which was in accord with the chemical analyses above. This work updates the fundamental understanding of the degradation of DCF in WAS anaerobic fermentation process and enlightens engineers to apply theoretical calculation to the field of sludge treatment or other complex microbial ecosystems.

Corncob biocarriers with available carbon release for Chlamydopodium sp. microalgae towards enhanced nitrogen removal from low C/N rare earth element tailings (REEs) wastewater

Low nitrogen (N) removal efficiency limits the potential of microalgae technology for the treatment of high nitrogen and low carbon rare earth tailings (REEs) wastewater. In this study, waste corncob was utilized as a biocarrier immobilizing Chlamydopodium sp. microalgae to realize high-efficient treatment of the REEs wastewater. In only 2.5 d, corncob-immobilized microalgae allowed the residual concentrations of N lower than the emission standards, and ammonia nitrogen (NH4+-N) removal rate is 83.3 mg L-1·d-1, total inorganic nitrogen (TIN) removal rate is 86.7 mg L-1·d-1, which was 18.5 times that of the previously-reported microalgae (4.68 mg L-1·d-1). Compared with other microalgae immobilization carriers, corncob possesses the ability to release available carbon sources for microalgae. Composition analysis and sugar verification experiments showed that the main content of TOC released by corncob was monosaccharide, and in a certain range, the removal rate of N was positively correlated with the TOC concentration. The utilization of biomass wastes with dual functions as biological carriers has great potential to improve the performance of microalgae, and is conducive to the development of engineering applications.

Enhanced oxidation of organic contaminants by Mn(VII) in water

Studies that promote chemical oxidation by permanganate (MnO₄^-; Mn(VII)) as a viable technology for water treatment and environmental purification have been quickly accumulating over the past decades. Various methods to activate Mn(VII) have been proposed and their efficacy in destructing a wide range of emerging organic contaminants has been demonstrated. This article aims to present a state-of-art review on the development of Mn(VII) activation methods, including photoactivation, electrical activation, the addition of redox mediators, carbonaceous materials, and other chemical agents, with a particular focus on the potential activation mechanism and critical influencing factors. Different reaction mechanisms are involved in activated Mn(VII) oxidation processes, including the generation of reactive intermediates derived from Mn(VII) (e.g., Mn(III), Mn(V), and Mn(VI)) or activators (e.g., intermediates of redox mediators and Ru catalysts), reactive oxygen species (ROS) (e.g., •OH, O₂^•-, and ¹O₂), as well as electron transfer from organics to Mn(VII) via catalysts as the electron mediator. Except •OH that is generated as one of co-oxidants in UV/Mn(VII) process, other reactive species are relatively mild oxidants, which are more selective toward organic substrates and highly tolerant toward various water matrices (e.g., inorganic ions and natural organic matter) compared to strongly oxidizing radical species. Therefore, activated Mn(VII) oxidation processes show a good prospect for efficient removal of target contaminants in natural and complex environmental matrices. However, there are some disputes about the dominant reactive species generated in these processes, and their identification methods may be not appropriate, causing serious confusion in the mechanistic understanding. So, further efforts are still needed to fill the knowledge gap and also to address the application challenges of these technologies.

Past, present, and future perspectives of biodegradable films for soil: A 30-year systematic review

Based on the Web of Science Core Collection (WOSCC) database, the academic works published in the past 30 years on biodegradable films for soil were analyzed. In order to ensure the rigor of this experiment, this paper is based on the mathematical double matrix model VOS Viewer software and CiteSpace software. This work shows that publications of biodegradable films for soil are increasing year by year; polymer science is the hottest subject in the field of biodegradable films for soil; China and the United States are the countries with the most significant number of publications in this field, has an important position; Washington State University is the most published institution. This study further identifies and reveals the essential characteristics, research strength, knowledge structure, main research fields, and research hotspots in the late stage of the field of biodegradable films for soil and introduces the Activity Index (AI) and the Attractive Index (AAI), thereby assessing trends and performance in different countries. The paper also further illustrates the importance of biodegradable films by presenting field trials using biodegradable films on different plants. The research in the field of biodegradable films for soil is divided into four categories: “The research field of degradation,” “The effect of biodegradable film on soil,” “Performance and mechanism of the biodegradable film,” and “Effects of biodegradable film on crop growth and development.”. The study can be seen as a microcosm of the development of biodegradable films for soils, which will help researchers quickly identify their general patterns. Readers can better understand the changes and development trends in this field in the past 30 years and provide references for future research.

The evolution of stable nanohybrids to complex heteroaggregates between nZVI and soil nanoparticles: The influence of ionic strength and soil components

The heteroaggregation mechanism of nZVI with four types of natural soil nanoparticles (SNPs) extracted from representative soils in northern and southern China was investigated. Heteroaggregation rates between nZVI and SNPs were quantified by dynamic light scattering and evaluated as a function of ionic strength at pH 7. The nZVI-SNPs heteroaggregates were stable with hydrodynamic diameters (D_h) ranging from 400 to 600 nm in 0.1 mM solution. Based on the extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, nZVI underwent heteroaggregation with SNPs to form stable nZVI-SNPs nanohybrid due to the attachment of nZVI on the SNPs. However, with enhanced ionic strength, SNPs accelerated the aggregation of nZVI and formed large heteroaggregates with D_h in the range from 1200 to 2000 nm, owing to insignificant electrostatic repulsions and oppositely charged patches. In addition, the differences in the heteroaggregation rates of nZVI with four SNPs were negligible, caused by the negligible impacts of SNPs components such as soil organic matter and Fe/Al oxyhydroxides on the heteroaggregation of nZVI in the 10 mM NaCl solution. These findings are helpful for understanding the interaction between nZVI and SNPs and of significance to groundwater remediation using nZVI.

Degradation of Organic Contaminants by Reactive Iron/Manganese Species: Progress and Challenges

Many iron(II, III, VI)- and manganese(II, IV, VII)-based oxidation processes can generate reactive iron/manganese species (RFeS/RMnS, i.e., Fe(IV)/Fe(V) and Mn(III)/Mn(V)/Mn(VI)), which have mild and selective reactivity toward a wide range of organic contaminants, and thus have drawn significant attention. The reaction mechanisms of these processes are rather complicated due to the simultaneous involvement of multiple radical and/or nonradical species. As a result, the ambiguity in the occurrence of RFeS/RMnS and divergence in the degradation mechanisms of trace organic contaminants in the presence of RFeS/RMnS exist in literature. In order to improve the critical understanding of the RFeS/RMnS-mediated oxidation processes, the detection methods of RFeS/RMnS and their roles in the destruction of trace organic contaminants are reviewed with special attention to some specific problems related to the scavenger and probe selection and experimental results analysis potentially resulting in some questionable conclusions. Moreover, the influence of background constituents, such as organic matter and halides, on oxidation efficiency of RFeS/RMnS-mediated oxidation processes and formation of byproducts are discussed through their comparison with those in free radicals-dominated oxidation processes. Finally, the prospects of the RFeS/RMnS-mediated oxidation processes and the challenges for future applications are presented.

Comparative study on heterogeneous activation of peroxydisulfate and peroxymonosulfate with black carbon derived from coal tar residues: Contribution of free radical, 1O2 and surface-bound radicals

Carbon materials draw increasing attention as metal-free catalysts for persulfates activation. Herein, the potential of black carbon (BC) derived from coal tar residues on heterogeneous activation of peroxydisulfate (PDS) and peroxymonosulfate (PMS) to eliminate organic pollutants was investigated. Compared with UV/persulfates systems, persulfates/BC systems degraded 3 selected phenolic compounds (i.e. phenol, 4-chlorophenol (4-CP) and bisphenol A (BPA)) with an order of magnitude higher oxidation rates, and removed dissolved organics (DOC) with over 27% higher efficiency. In the PDS/BC system, ¹O₂ and surface-bound radicals were proved to be the dominant active species, while free radicals, ¹O₂, and surface-bound radicals were responsible for organics oxidation in the PMS/BC system. Relative contribution of different reactive species in persulfates/BC systems was pH-dependent. Surface oxygen functionalities of BC were involved in ¹O₂ generation, and its structural defects played a critical role in forming free radicals and surface-bound radicals. This study provided an in-depth insight into carbon-driven persulfates activation processes.

In suit constructing S-scheme FeOOH/MgIn2S4 heterojunction with boosted interfacial charge separation and redox activity for efficiently eliminating antibiotic pollutant

Photocatalytic elimination of antibiotic pollutant is an appealing avenue in response to the water contamination, but it still suffers from sluggish charge detachment, limited redox capacity as well as poor visible light utilization. Herein, a particular S-scheme FeOOH/MgIn₂S₄ heterojunction with wide visible light absorption was triumphantly constructed by in-situ growth of MgIn₂S₄ nanoparticles onto the surface of FeOOH nanorods, and employed as a high-efficiency visible light driven photocatalyst for removing tetracycline (TC). Conspicuously, the as-obtained FeOOH(15 wt%)/MgIn₂S₄ elucidated the optimal TC removal rate of 0.01258 min^-1 after 100 min of visible light illumination, which was almost 33.1 and 6.6 times larger than those of neat FeOOH and MgIn₂S₄, separately. The exceptional degradation performance was principally put down to the establishment of S-scheme heterojunction between FeOOH and MgIn₂S₄, which could not merely accelerate the detachment of photogenerated carriers, but also retain the powerful reducing ability of photoinduced electrons for MgIn₂S₄ and high oxidizing capacity of photoexcited holes for FeOOH, strongly driving the generation of plentiful active species including holes, superoxide and hydroxyl radicals. Additionally, the possible degradation mechanism and pathways of TC were also speculated. This work offers a valuable perspective for constructing high-efficiency S-scheme heterojunction photocatalysts for eradicating antibiotics.

Effects of biochar-based materials on the bioavailability of soil organic pollutants and their biological impacts

Motivated by the unique structure and superior properties, biochar-based materials, including pristine biochar and composites of biochar with other functional materials, are considered as new generation materials for diverse multi-functional applications, which may be intentionally or unintentionally released to soil. The influencing mechanism of biochar-based material on soil organisms is a key aspect for quantifying and predicting its benefits and trade-offs. This work focuses on the effects of biochar-based materials on soil organisms within the past ten years. 206 sources are reviewed and available knowledge on biochar-based materials' impacts on soil organisms is summarized from a diverse perspective, including the pollutant bioavailability changes in soil, and potential effects of biochar-based materials on soil organisms. Herein, effects of biochar-based materials on the bioavailability of soil organic pollutants are detailed, from the perspective of plant, microorganism, and soil fauna. Potential biological effects of pristine biochar (PBC), metal/metal compounds-biochar composites (MBC), clay minerals-biochar composites (CMBC), and carbonaceous materials-biochar composites (CBC) on soil organisms are highlighted for the first time. And possible mechanisms are presented based on the different characters of biochar-based materials as well as various environmental interactions. Finally, the bottleneck and challenges of risk assessment of biochar-based materials as well as future prospects are proposed. This work not only promotes the development of risk assessment system of biochar-based materials, but broadens the strategy for the design and optimization of environmental-friendly biochar materials.

Activation of peroxymonosulfate by a floating oxygen vacancies - CuFe2O4 photocatalyst under visible light for efficient degradation of sulfamethazine

In this study, expanded perlite supported oxygen vacancies-CuFe₂O₄ (OVs-CFEp) was synthesized via a simple method and utilized as floating catalyst to activate peroxymonosulfate (PMS) for the removal of sulfamethazine (SMT) under visible light irradiation. OVs-CFEp/Vis/PMS synergy presents much superior performance than that of OVs-CFEp/Vis system and OVs-CFEp/PMS system. PMS was efficiently activated by OVs-CFEp at a wide range of pH values, while the degrading rate of SMT was up to 95% in OVs-CFEp/Vis/PMS system. Oxygen vacancies and ·O₂^- accelerated the conversion of Fe(III)/Fe(II) and Cu(I)/Cu(II). The combination of the floating loader boosted light absorption capacity and sufficiently prevented metal ions leaching, which was all beneficial to enhance catalytic performance and recyclability. Besides, the reactive oxygen species were investigated systematically, proving that visible light and OVs-CFEp could activate PMS to produce ·SO₄^-, ·OH, O₂·^-, and ¹O₂ reactive species. Furthermore, based on intermediates identification and Density Functional Theory (DFT) calculation, three types and seven main degradation pathways involving cleavage of bond, SMT molecular rearrangement, and hydroxylation reaction were proposed. So this high photo-absorbing catalyst coupling with advanced oxidation progress was promising for extensive environmental remediation.

The pH dependence and role of fluorinated substituent of enoxacin binding to ferrihydrite

The sorption of antibiotics on iron (hydr)oxides is an important process that influences their environmental fate. Ferrihydrite (Fh) nanosized iron hydroxide is omnipresent in nature. However, the sorption mechanism of fluoroquinolone (FQ) antibiotics on Fh is unclear. Here, a combined experimental and computational study was conducted to investigate the sorption of enoxacin (ENO) as one model of FQs on Fh. Pipemidic acid (PPA), as a structural analog of ENO, was selected to compare the effect of fluorinated substituent on the sorption mechanism. Results indicated that the average K_d values of ENO at pH = 7.0 and 8.0 were 1.72 and 2.75 times higher than those at pH in the ranges of 4.0-6.0 and 9.0-10.0, respectively. The main sorption mechanisms included electrostatic, hydrophobic interaction, and inner-sphere complexation. The fluorinated substituent of ENO facilitated its sorption on Fh through enhancing its hydrophobicity as well as modifying its dissociation constants and charge distribution. The findings give new insights into the significant influence of active fluorinated substituents on the environmental behaviors of fluorinated pharmaceuticals.

Periodate activated by manganese oxide/biochar composites for antibiotic degradation in aqueous system: Combined effects of active manganese species and biochar

Developing efficient catalysts for oxytetracycline (OTC) degradation is an ideal strategy to tackle environmental pollution, and advanced oxidation processes (AOPs) have been widely used for its degradation. However, the studies on the activation of periodate (PI) by biochar and its composites in recent years have been scarcely reported. In this study, we focused on the degradation of OTC by PI activation with manganese oxide/biochar composites (Mn_xO_y@BC). Experimental results showed that the OTC degradation rate of Mn_xO_y@BC/PI system reached almost 98%, and the TOC removal efficiency reached 75%. Various characteristic analysis proved that PI could be activated efficiently by surface functional groups and manganese-active species (Mn(II), Mn(III), and Mn(IV)) on biochar, and various reactive species such as singlet oxygen (¹O₂), hydroxyl radical (∙OH), and superoxide radical (O₂^∙-) can be observed via radical quenching experiments. Based on this, three degradation pathways were proposed. Furthermore, Mn_xO_y@BC and PI were combined to degrade environmental pollutants, which achieved excellent practical benefits and had great practical application potential. We hope that it can provide new ideas for advanced oxidation processes (AOPs) applying for wastewater treatment in the future.

Layered double hydroxides functionalized by carbonaceous materials: from preparation to energy and environmental applications

Along with the exponential demand for energy and pollution-free-environment, layered double hydroxides (LDHs) have gained extensive explorations because of their diverse nanostructures and tunable elemental compositions. However, the applications of LDHs are hindered by their poor activity, sluggish mass transfer, and aggregation. LDHs functionalized by carbonaceous materials (CMs) (LDH-CM) are expected to overcome the above disadvantages and even generate more excellent performance. This review first analyzes the research evolvement of LDH-CM composites during the past 25 years. Next, the advantages of LDH-CM composites are highlighted, such as morphology optimization, high electrical conductivity, more stable, good heat, and mass transfer performance. Following the synthetic strategies, including chemical assembly of LDHs and CMs, direct growth of LDH on CMs (two-step nucleation and growth and surface-confined growth) and direct CM formation on LDHs are fully discussed. Then, the recent progress achieved in LDH-CM composites for the application of energy storage and environmental protection is summarized in detail. In particular, the review illustrates the reasons why these constructing strategies can improve the performance of LDH-CM composites. Finally, challenges and future research prospects of LDH-CM composites are highlighted.

Biochar in the 21st century: A data-driven visualization of collaboration, frontier identification, and future trend

The massive amounts of publication data are highly valuable, because in addition to the advancement in science, technology, and policy, such data can provide critical information and guidance on what have been published, what topical changes have evolved, and what are the trending fields deserving more attention. In the 21st century, biochar has played an indispensable role in the long-term global development strategies in response to "Carbon neutralization", "Agricultural management", and "Environmental restoration", and accumulated many high-quality publications. Herein, this study provides a new data-driven bibliometric analysis strategy and framework for mining the core content of massive literature data, and aims at bringing unique insights for the research prospects as well as opportunities of biochar. The results show that biochar researches have made great progress from 1999 to 2020, but cross-disciplinary teamwork should be further emphasized. The research frontier identification reveals that sewage treatment, efficient removal, and functional composite materials will be the issues which must be paid continual attention at present and in the future. Furthermore, studies on global climate impact, biomass resource utilization, carbon sequestration, carbon cycle, and even the negative effects of biochar have gradually begun to be taken seriously.

Solar light photocatalytic transformation of heptachlorobiphenyl (PCB 180) using g-C3N4 based magnetic porous photocatalyst

A novel porous core-shell magnetic β-cyclodextrin/graphitic carbon nitride photocatalyst (Mβ-CD/GCN) was synthesized and employed in a solar light driven catalytic system for the degradation of polychlorinated biphenyls (PCBs). The Mβ-CD/GCN display superior photocatalytic performance on account of porous structure and ultrathin GCN nanosheets design, the former improves the utilization of visible light by multiple scattering and reflection of incident light, and the latter accelerates electron transfer. The ultrahigh specific surface area (1255 m² g^-1) of Mβ-CD/GCN provided a large number of active sites for adsorption and degradation of the target pollution. The pseudo-first order reaction rate constant (k_obs) for the degradation of PCB180 by Mβ-CD/GCN was 0.021 min^-1, which improved 3.23 times than the bulk GCN. Additionally, the effects of various reaction parameters and water matrices were studied on the degradation of PCB180. Three possible degradation pathways and mechanism of PCB180 were speculated according to the identification of reaction intermediates and detection of reactive species. The solar light driven Mβ-CD/GCN catalytic technology is a promising method not only for the control of persistent organic pollutants (POPs), but also the catalyst could be recovered and reused through simple magnetic separation.

Insights into photocatalytic degradation of phthalate esters over MSnO3 perovskites (M = Mg, Ca): Experiments and density functional theory

In this study, the physicochemical and photocatalytic properties of two kinds of stannate perovskite oxides (MgSnO₃ and CaSnO₃) were investigated under simulated sunlight, where dimethyl phthalate (DMP) and diethyl phthalate (DEP) were selected as the probe pollutants. The results of photochemical characterization showed that MgSnO₃ perovskite exhibited better photocatalytic performance than CaSnO₃ perovskite. MgSnO₃ perovskite could effectively degrade 75% of DMP and 79% of DEP through pseudo-first-order reaction kinetics, which remained good in pH 3.0 to 9.0. Quenching experiments and electron paramagnetic resonance (EPR) characterization indicated that photogenerated holes (h⁺), superoxide (O₂^-), and hydroxyl radicals (OH) worked in the photo-degradation, while O₂^- played the most important role. Furthermore, intermediates identification and density functional theory (DFT) calculations were used to explore the degradation mechanism. For both DMP and DEP, the reactive oxygen species (ROS, including O₂^- and OH) were responsible for the hydroxylation of benzene ring and the breaking of the aliphatic chain, while h⁺ was prone to break the aliphatic chain. This work is expected to provide new insights on the photocatalytic mechanism of stannate perovskites for environmental remediation.

Research progress of metal organic frameworks and their derivatives for adsorption of anions in water: A review

Anion pollution in water has become a problem that cannot be ignored. The anion concentration should be controlled below the national emission standard to meet the demand for clean water. Among the methods for removing excess anions in water, the adsorption method has a unique removal performance, and the core of the adsorption method is the adsorbent. In recent years, the emerging metal-organic frameworks (MOFs) have the advantages of adjustable porosity, high specific surface area, diverse functions, and easy modification. They are very competitive in the field of adsorption of liquid anions. This article focuses on the adsorption of fluoride, arsenate, chromate, radioactive anions (ReO₄^-, TcO₄^-, SeO₄^2-/SeO₃^2-), phosphate ion, chloride ion, and other anions by MOFs and their derivatives. The preparation methods of MOFs are introduced in turn, the application of different types of metal-based MOFs to adsorb various anions were discussed in categories with their crystal structure and functional groups. The influence on the adsorption of anions is analyzed, including the more common and special adsorption mechanisms, adsorption kinetics and thermodynamics, and regeneration performance are briefly described. Finally, the current situation of MOFs adsorption of anions is summarized, and the outlook for future development is summarized to provide my own opinions for the practical application of MOFs.

Extensive solar light utilizing by ternary C-dots/Cu2O/SrTiO3: Highly enhanced photocatalytic degradation of antibiotics and inactivation of E. coli

Fabrication of a visible-light driven photocatalyst is of great vital for the elimination of antibiotics and microorganism in the wastewater and the construction of sustainable green energy systems. In this work, carbon quantum dots (C-dots) were integrated with Cu₂O/SrTiO₃ p-n heterojunction to optimize the photocatalytic activity. The excellent photocatalytic degradation efficiency of chlortetracycline hydrochloride (CTC·HCl) (92.6% within 90 min) and E. coli inactivation efficiency were observed over C-dots/Cu₂O/SrTiO₃ under visible light irradiation. It is the synergistic effect of p-n heterojunction and modification of C-dots that facilitates the separation and transfer of electron-holes. Meanwhile, the modification of C-dots improves the harvesting of long wavelength solar light of photocatalysts due to its unique up-conversion photoluminescence (UCPL) characteristics. Eventually, the possible photocatalytic degradation path of the catalyst was inferred by LC-MS spectra, and the degradation mechanism was analyzed. This study sheds light on new possibilities for the application of photocatalysts in various light sources and has broad application prospects in water treatment.

Tailoring biochar for persulfate-based environmental catalysis: Impact of biomass feedstocks

Biochar, a carbonaceous material with engineering potential, has gained attention as an efficient catalyst in persulfate-based advanced oxidation processes (PS-AOPs). Although biomass feedstocks are known as a critical factor for the performance of biochar, the relationship between the catalytic efficiency/mechanism and the types of biomass feedstocks is still unclear. Thus, according to recent advances in experimental and theoretical researches, this paper provides a systematic review of the properties of biochar, and the relationship between catalytic performance in PS-AOPs and biomass feedstocks, where the differences in physicochemical properties (surface properties, pore structure, etc.) and activation path of different sourced biochars, are introduced. In addition, how the tailoring of biochar (such as heteroatomic doping and co-pyrolysis of biomass) affects its activation efficiency and mechanism in PS-AOPs is summarized. Finally, the suitable application scenarios or systems of different sourced biochars, appropriate methods to improve the catalytic performance of different types of biochar and the prospects and challenges for the development of biochar in PS-AOPs are proposed.