Microplastics discharged from urban drainage system: Prominent contribution of sewer overflow pollution

Revealing the size effect mechanisms of micro(nano)plastics on nitrogen removal performance of constructed wetland

Micro(nano)plastics (MPs) in aquatic environments can disrupt wastewater treatment, particularly nitrogen removal in constructed wetlands (CWs). However, their broader effects on microbial and plant nitrogen metabolism remain unclear. This study investigated the effects of different-sized MPs (4 mm, 100 µm, and 100 nm) on nitrogen transformation in CWs. Results revealed that 4 mm- and 100 µm-MPs did not significantly affect total nitrogen (TN) removal, although 100 µm-MPs significantly increased leaf antioxidant enzyme activities and reduced plant uptake of nitrogen by 12.95 % (p < 0.05). In contrast, 100 nm-MPs decreased the TN removal efficiency by 7.97 % via inhibiting both nitrification and denitrification, since 100 nm-MPs penetrated cell membranes, disrupted reactive oxygen species balance, and reduced bacterial viability, thus suppressing microbial nitrogen degradation by 8.07 % (p < 0.05). Additionally, 100 nm-MPs significantly inhibited plant growth and reduced plant nitrogen uptake by 16.05 % (p < 0.05). Furthermore, 100 µm-MPs increased the abundance of nitrifiers but reduced denitrifiers and functional genes, whereas 100 nm-MPs reduced the abundance of both nitrifiers and denitrifiers along with their functional genes (p < 0.05). These findings highlight the need to improve waste management to mitigate the adverse effects of MPs on nitrogen removal.

Microplastic occurrence and distribution in the Gulf of Guayaquil, Ecuador

Microplastics (MPs) were assessed in water and sediment samples along the Salado Estuary, an estuarine system composed of a complex river drainage network in Guayas, Ecuador. MPs were quantified and categorized according to shape, size, and composition. Pellet morphology (237,490 MP/L) and transparent color MPs (252,990 MP/L) were the most common in water, while fragments (27,330 MP/m3) and silver color MPs (25,310 MP/kg) were the most common in solid samples (river sediments, mangrove mud, and sand). MPs made of Polycarbonate, Polyestyrene, and Polypropylene were the most common in all samples. Giving MPs characteristics, likely mapped sources were wastewater from Guayaquil and surrounding towns, boats, and shrimp farms. The samples with the highest MPs were found near Guayaquil, and those with the least were found in the estuary mouth. Monitoring and managing plastic disposal in estuaries are fundamental, as we report a small part of an undocumented issue here.

Impact of Fenton aging on the incipient motion of microplastic particles in open-channel flow

Upon entering the environment, Microplastics (MPs) experience aging processes that modify their properties and integrity. Previous methods for predicting the incipient motion of MPs have been validated using pristine plastics, which do not account for the effects of aging. This can lead to uncertainties in both quantification and characterization. This study investigates the effect of aging on the incipient motion of MPs with different bed roughness (smooth and rough beds) and MP properties (e.g., grain sizes and densities) in an open-channel flow. Five types of MPs were subjected to four different degrees of aging using the Fenton reagent, and their incipient velocities were tested on beds with two distinct roughness. The results suggest that the incipient velocity of MPs increases linearly with aging. However, this increase is not uniform across different particles and bed roughness. Upon comparing various commonly employed sediment incipient velocity equations, experimental results are in agreement with Ruijin Zhang's equation as the most precise. The parameters in Ruijin Zhang's equation are modified to enhance its applicability for predicting the incipient velocity of aged MPs. This study provides novel insights into the incipient motion of aged MPs in an open-channel flow, highlighting the intricate interaction between aged MP characteristics and bed roughness.

Microplastic removal and risk assessment framework in a constructed wetland for the treatment of combined sewer overflows

Combined sewer overflows (CSOs) release a significant amount of pollutants, including microplastics (MPs), due to the discharge of untreated water into receiving water bodies. Constructed Wetlands (CWs) offer a promising strategy for CSO treatment and have recently attracted attention as a potential solution for MP mitigation. Nevertheless, limited research on MP dynamics within CSO events and MP removal performance in full-scale CW systems poses a barrier to this frontier of application. This research aims to address both these knowledge gaps, representing the first investigation of a multi-stage CSO-CW for MP removal. The study presents one year of seasonal data from the CSO-CW upstream of the WWTP in Carimate (Italy), evaluating the correlation of MP abundance with different water quality/quantity parameters and associated ecological risks. The results show a clear trend in MP abundance, which increases with rainfall intensity. The strong correlation between MP concentration, flow rate, and total suspended solids (TSS) validates the first flush phenomenon hypothesis and its impact on MP release during CSOs. Chemical characterization identifies acrylonitrile-butadiene-styrene (ABS), polyethylene (PE), and polypropylene (PP) as predominant polymers. The first vertical subsurface flow (VF) stage showed removal rates ranging from 40 % to 77 %. However, the unexpected increase in MP concentrations after the second free water surface (FWS) stage suggests the stochasticity of CSO events and the different hydraulic characteristics of the CW units have diverse effects on MP retention. These data confirm filtration as the main retention mechanism for MP within CW systems. The MP ecological risk assessment indicates a high-risk category for most of the water samples, mainly related to the frequent presence of ABS fragments. The results contribute to the current understanding of MPs released by CSOs and provide insights into the performance of different treatment units within a large-scale CSO-CW system, suggesting the requirement for further attention.

Assessing the abundance, sources, and potential ecological risk assessment of microplastics using their particle and mass units in Uiam Lake, South Korea

Microplastics (MPs) enter lakes through various pathways, including effluents from wastewater treatment plants (WWTPs), surface runoff, and improperly disposed of plastic waste. In this study, the extent of MPs pollution in Uiam Lake in fall of 2022 and spring of 2023 was assessed by determining both the number (n/m3) and mass concentrations (μg/m3) of MPs. Moreover, the correlation between water quality parameters and MP properties was analyzed, and an ecological risk assessment was conducted. MPs abundance was higher in spring than in fall, probably due to the lifting of coronavirus disease-19 restrictions, melting of ice, higher rainfall, and faster wind speed. Fragment was the dominant shape of the MPs collected, while polyvinyl chloride (PVC) and polyester/polyethylene terephthalate were the frequently detected polymer types of MPs in fall and spring, respectively. There was a moderate positive correlation between the number concentration of MPs and the total nitrogen, total phosphorus (T-P), and total organic carbon levels; in contrast, there was no significant relationship between the mass concentration of MPs and all water quality parameters. However, the abundance (μg/m3) of PVC and polymethyl methacrylate MPs were positively correlated with T-P and electrical conductivity. The pollution load index, polymer hazard index, and potential ecological risk index (PERI) were generally higher when the mass unit of MPs was used due to the presence of large-sized MPs composed of highly hazardous polymers (e.g., polyurethane, PVC, and alkyd). For instance, the PERI value of the WWTP effluent was at the very high level (>1200) in both seasons, regardless of the abundance unit of MPs. Therefore, WWTP effluents may have increased the ecological toxicity of MPs pollution in Uiam Lake.

A comprehensive review of urban microplastic pollution sources, environment and human health impacts, and regulatory efforts

Microplastic (MP) pollution in urban environments is a pervasive and complex problem with significant environmental and human health implications. Although studies have been conducted on MP pollution in urban environments, there are still research gaps in understanding the exact sources, regulation, and impact of urban MP on the environment and public health. Therefore, the goal of this study is to provide a comprehensive overview of the complex pathways, harmful effects, and regulatory efforts of urban MP pollution. It discusses the research challenges and suggests future directions for addressing MPs related to environmental issues in urban settings. In this study, original research papers published from 2010 to 2024 across ten database categories, including PubMed, Google Scholar, Scopus, and Web of Science, were selected and reviewed to improve our understanding of urban MP pollution. The analysis revealed multifaceted sources of MPs, including surface runoff, wastewater discharge, atmospheric deposition, and biological interactions, which contribute to the contamination of aquatic and terrestrial ecosystems. MPs pose a threat to marine and terrestrial life, freshwater organisms, soil health, plant communities, and human health through ingestion, inhalation, and dermal exposure. Current regulatory measures for MP pollution include improved waste management, upgraded wastewater treatment, stormwater management, product innovation, public awareness campaigns, and community engagement. Despite these regulatory measures, several challenges such as; the absence of standardized MPs testing methods, MPs enter into the environment through a multitude of sources and pathways, countries struggle in balancing trade interests with environmental concerns have hindered effective policy implementation and enforcement. Addressing MP pollution in urban environments is essential for preserving ecosystems, safeguarding public health, and advancing sustainable development. Interdisciplinary collaboration, innovative research, stringent regulations, and public participation are vital for mitigating this critical issue and ensuring a cleaner and healthier future for urban environments and the planet.

Phosphorus recovery via struvite crystallization in batch and fluidized-bed reactors: Roles of microplastics and dissolved organic matter

Struvite crystallization, a promising technology for nutrient recovery from wastewater, is facing considerable challenges due to the presence of emerging contaminants such as microplastics (MPs) ubiquitously found in wastewater. Here, we investigate the roles of MPs and humic acid (HA) in struvite crystallization in batch and fluidized-bed reactors (FBRs) using synthetic and real wastewater with a Mg:N:P molar ratio of 1:3:(1-1.3) at an initial pH of 11. Batch reactor (BR) experiment results show that MPs expedited the nucleation and growth rates of struvite (e.g., the rate of crystal growth in the presence of 30 mg L-1 of polyethylene terephthalate (PET) was 1.43 times higher than that in the blank system), while HA hindered the formation of struvite. X-ray diffraction and the Rietveld refinement analysis revealed that the presence of MPs and HA can result in significant changes in phase compositions of the reclaimed precipitates, with over 80 % purity of struvite found in the precipitates from suspensions in the presence of 30 mg L-1 of MPs. Further characterizations demonstrated that MPs act as seeds of struvite nucleation, spurring the formation of well-defined struvite, while HA favors the formation of newberyite rather than struvite in both reactors. These findings highlight the need for a more comprehensive understanding of the interactions between emerging contaminants and struvite crystallization processes to optimize nutrient recovery strategies for mitigating their adverse impact on the quality and yield of struvite-based fertilizers. ENVIRONMENTAL IMPLICATION: The presence of microplastics in wastewater poses a significant challenge to struvite crystallization for nutrient recovery, as it accelerates nucleation and growth rates of struvite crystals. This can lead to changes in the phase compositions of the reclaimed precipitates, with implications for the quality and yield of struvite-based fertilizers. Additionally, the presence of humic acid hinders the formation of struvite, favoring the formation of other minerals like newberyite. Understanding the interactions between emerging contaminants and struvite crystallization processes is crucial for optimizing nutrient recovery strategies and mitigating the environmental impact of these contaminants on water quality and struvite-based fertilizers.

Microplastics in marine ecosystems: A comprehensive review of biological and ecological implications and its mitigation approach using nanotechnology for the sustainable environment

Microplastic contamination has rapidly become a serious environmental issue, threatening marine ecosystems and human health. This review aims to not only understand the distribution, impacts, and transfer mechanisms of microplastic contamination but also to explore potential solutions for mitigating its widespread impact. This review encompasses the categorisation, origins, and worldwide prevalence of microplastics and methodically navigates the complicated structure of microplastics. Understanding the sources of minute plastic particles infiltrating water bodies worldwide is critical for successful removal. The presence and accumulation of microplastics has far reaching negative impacts on various marine creatures, eventually extending its implications to human health. Microplastics are known to affect the metabolic activities and the survival of microbial communities, phytoplankton, zooplankton, and fauna present in marine environments. Moreover, these microplastics cause developmental abnormalities, endocrine disruption, and several metabolic disorders in humans. These microplastics accumulates in aquatic environments through trophic transfer mechanisms and biomagnification, thereby disrupting the delicate balance of these ecosystems. The review also addresses the tactics for minimising the widespread impact of microplastics by suggesting practical alternatives. These include increasing public awareness, fostering international cooperation, developing novel cleanup solutions, and encouraging the use of environment-friendly materials. In conclusion, this review examines the sources and prevalence of microplastic contamination in marine environment, its impacts on living organisms and ecosystems. It also proposes various sustainable strategies to mitigate the problem of microplastics pollution. Also, the current challenges associated with the mitigation of these pollutants have been discussed and addressing these challenges require immediate and collective action for restoring the balance in marine ecosystems.

Floating microplastic pollution in the vicinity of a marine protected area and semi-enclosed bay of Peru

A baseline survey for floating microplastics (MPs) in the vicinity of a marine protected area and semi-enclosed bay of northern Peru was carried out. An average concentration of 0.22 MPs/L was estimated, primarily dominated by blue polyethylene terephthalate fibers. The distribution of floating MPs suggests that they tend to accumulate within the semi-enclosed Sechura Bay regardless of the sampling season. This behavior may be explained by local surface currents in the bay, which flow inwards and exhibit vorticities that could entrap MPs. Future studies are suggested to investigate the trajectory and fate of floating MPs within semi-enclosed areas. On the other hand, the impact of floating MPs on the trophic chain of coastal marine protected areas requires further research.

Analysis of microplastics in the reuse of compost in three agricultural sites (Cádiz, Spain) as a circular economy strategy: detection of micropollutants and incidence of plastic ingestion levels by annelids

The system of fertilizing agricultural soils with sludge or compost from wastewater treatment processes, as one of the principles of the circular economy, can lead to microplastic (MP) contamination. The existing technical standards for fertilization are very recent and do not consider this problem, although there is scientific evidence of their existence. Therefore, this study, on the one hand, evaluates the presence of MPs in agricultural soils, previously treated with sludge or compost from wastewater treatment plants for fertilization, and on the second hand, it studies the effect of these MPs on earthworms in three different locations in the south of Spain. For the study, selected composts deriving from the different stages of the composting process and three fertilized soils with increasing MP doses were followed. Samples were taken from different sections in depth (0-5, 5-10, and 10-20 cm) to study the shape, size, type, and abundance of MPs using infrared spectroscopy (FTIR). The results showed that the most abundant shape was fiber, followed by fragment and finally bulk, for both composts and soils. Regarding size distribution, 100 µm was the predominant size in composts (64.3% ± 9.8), while in the case of soils, the predominant range was from 100 to 500 µm. The prevalent polymers in both, composts and soils, were PTFE, TPE, PP, and PET, with four times higher amounts in composts than in soils. Ingestion of common MPs were also verified in two earthworm species, which ingested concentrations higher than 2.1% w/w. PP was the most ingested MP and Eisenia fetida was more voracious compared with Lumbricus terrestris. Therefore, it can be considered a suitable bioindicator for monitoring microplastic contamination in agricultural soil.

Removal and fate of microplastics in permeable pavements: An experimental layer-by-layer analysis

The increasing prevalence of microplastics (MP) in urban environments has raised concerns over their negative effects on ecosystems and human health. Stormwater runoff, and road dust and sediment, act as major vectors of these pollutants into natural water bodies. Sustainable urban drainage systems, such as permeable pavements, are considered as potential tools to retain particulate pollutants. This research evaluates at laboratory scale the efficiency of permeable interlocking concrete pavements (PICP) and porous concrete pavements (PCP) for controlling microplastics, including tire wear particles (TWP) which constitute a large fraction of microplastics in urban environments, simulating surface pollution accumulation and Mediterranean rainfall conditions. Microplastic levels in road dust and sediments and stormwater runoff inputs were 4762 ± 974 MP/kg (dry weight) and 23.90 ± 17.40 MP/L. In infiltrated effluents, microplastic levels ranged from 2.20 ± 0.61 to 5.17 ± 1.05 MP/L; while tire wear particle levels ranged between 0.28 ± 0.28 and 3.30 ± 0.89 TWP/L. Distribution of microplastics within the layers of PICP and PCP were also studied and quantified. Microplastics tend to accumulate on the pavements surface and in geotextile layers, allowing microplastic retention efficiencies from 89 % to 99.6 %. Small sized (< 0.1 mm) fragment shaped microplastics are the most common in effluent samples. The results indicate that permeable pavements are a powerful tool to capture microplastics and tire wear particles, especially by surface and geotextile layers. The study aims to shed light on the complex mobilisation mechanisms of microplastics, providing valuable insights for addressing the growing environmental concern of microplastic pollution in urban areas.

Quantifying annual microplastic emissions of an urban catchment: Surface runoff vs wastewater sources

Urban clusters are recognized as hotspots of microplastic pollution, and the associated urban rivers convey microplastics into the global oceans. Despite this knowledge, the relative contributions of various sources to the annual microplastic emissions from urban catchments remain scarcely quantified. Here, we quantified microplastic emissions from a riverine urban catchment in Japan. The total microplastics (size range: 10-5000 μm) released from the catchment amounted to 269.1 tons/annum, of which 78.1% is contributed by surface runoff and other uncontrolled emissions (UCE), and 21.1% emerges from the regulated wastewater (controlled emissions; CE), implying that approximately one-fifth is intercepted and removed by the wastewater treatment plants (WWTPs). This further indicated higher microplastic pollution by unmanaged surface runoff compared to untreated wastewater. In the dry season, WWTPs contributed significantly to the reduction of total microplastic emissions (95%) compared to wet periods (8%). On an annual scale, the treated effluent occupies only 0.1% of the total microplastics released to the river network (212.4 tons/annum), while the remaining portion is dominated by UCE, i.e., primarily surface runoff emissions (98.9%), and trivially by the background microplastic inputs that are potentially derived through atmospheric depositions in dry days (1.0%). It was shown that moderate and heavy rainfall events which occur during 18% of the year (within the context of Japan), leading to 95% of the annual microplastic emissions, are crucial for pollution control of urban rivers. Furthermore, our study demonstrated that surface area-normalized microplastic emissions from an urban catchment (∼0.8 tons/km2/annum) is globally relevant, especially for planning microplastic interventions for developed cities.

Occurrence characteristics and potential risk of microplastics under different land conditions

Microplastics (MPs) pollution has caused widespread concern, more researchers have focused on MPs in farmland soil. However, the distribution of MPs in different land use types, land restoration years and crop types remained largely unexplored. Therefore, the study investigated the distribution characteristics and evaluated ecological risk of MPs in soil of northern Shaanxi Province, China. The abundance, particle size, morphology and polymer types of MPs in soil were analyzed by sample collection, Raman spectroscopy and laser direct infrared spectroscopy (LDIR). The ecological risk index (H) and pollution load index (PLI) were employed to assess the risks posed by MPs in the soil. It was shown that the concentration of MPs in farmland soil was the highest (4483 items·kg-1) among the different land use types. The average abundance of microplastics in farmland soil was 1.98 times than that in industrial park soil. An increase in restoration years corresponded with a decrease in MPs abundance and an increase in smaller-sized MPs. In addition, the content of MPs in the soil of perennial crops was more stable, with fluctuations less than 25%, and the size of MPs was smaller than that of the annual crops. The main types of MPs in the soil of the study area were PP (28.5%) and PET (24.1%), MPs with size between 20 and 40 μm were dominated. Based on the pollution load index (PLI), 51.9% of the sampling sites were categorized as moderately polluted, and the MPs pollution risk of farmland soil was the highest. Mild and moderate pollution caused fewer adverse impact, while extremely strong pollution was detrimental to ecosystems and human health. In general, the study would provide a foundational understanding of MPs pollution levels and environment risk associated with different land use types, land restoration years and crop types.

Quantitative analysis of microplastics in water environments based on Raman spectroscopy and convolutional neural network

With the increasing interest in microplastics (MPs) pollutants, quantitative analysis of MPs in water environment is an important issue. Vibrational spectroscopy, represented by Raman spectroscopy, is widely used in MP detection because they can provide unique fingerprint characteristics of chemical components of MPs, but it is difficult to provide quantitative information. In this paper, an ingenious method for quantitative analysis of MPs in water environment by combining Raman spectroscopy and convolutional neural network (CNN) is proposed. It is innovatively proposed to collect the average mapping spectra (AMS) of the samples to improve the uniformity of Raman spectroscopy detection, and to increase the effective detection range of concentration by filtering different volumes of the same MP solutions. In order to verify the universality and effectiveness of the proposed method, 6 different sizes of Polyethylene (PE) MPs were used as detection objects and mixed into 5 different actual water environments. The R2 and RMSE of CNN for identifying the concentration of PE solutions could reach 0.9972 and 0.033, respectively. Meanwhile, by comparing machine learning models such as Random Forest (RF) and Support Vector Machine (SVM) were compared, and CNN combined with Raman spectroscopy has significant advantages in identifying the concentration of MPs.

Effects of different oxidants on the behaviour of microplastic hetero-aggregates

Microplastic hetero-aggregates are stable forms of microplastics in the aqueous environment. However, when disinfecting water containing microplastic hetero-aggregates, the response of them in water to different oxidizing agents and the effect on water quality have not been reported. Our results showed that Ca(ClO)2, K2S2O8, and sodium percarbonate (SPC) treatment could lead to the disaggregation of microplastic hetero-aggregates as well as a rise in cell membrane permeability, which caused a large amount of organic matter to be released. When the amount of oxidant dosing is insufficient, the oxidant cannot completely degrade the released organic matter, resulting in DOC, DTN, DTP and other indicators being higher than before oxidation, thus causing secondary pollution of the water body. In comparison, K2FeO4 can purify the water body stably without destroying the microplastic hetero-aggregates, but it only weakly inhibits the toxic cyanobacteria Microcystis and Pseudanabaena, which may cause cyanobacterial bloom as well as algal toxin and odorant contamination in practical application. Compared with the other oxidizers, K2S2O8 provides better inhibition of toxic cyanobacteria and has better ecological safety. Therefore, when treating microplastic-containing water bodies, we should consider both water purification and ecological safety, and select appropriate oxidant types and dosages to optimize the water treatment.

Environmental fate of microplastics in alpine and canyon-type river-cascade reservoir systems: Large-scale investigation of the Yalong River in the eastern Qinghai-Tibet Plateau

Reservoirs are regarded as potential collection sites for microplastics (MPs), and ample water resources in plateau regions provide favorable natural conditions for hydroelectric power generation. However, research on the impact of cascade reservoir construction in the plateau region on the fate of MPs within the watershed is limited. In this study, the Yalong River, an alpine canyon river in the eastern Qinghai-Tibet Plateau, was selected as the research area. This study explored the distribution of MPs at various depths in water, sediment, and riverbank soil as well as the formation of "MP communities" within the river-cascade reservoir system. Furthermore, the effects of dam construction on MPs' migration in different environments were analyzed. The results revealed that the abundance of MPs in the water and sediment within the cascade reservoir area (CRA) was significantly higher than that in the river area (RA) (P < 0.001). Additionally, the trend of increasing MPs in water with decreasing altitude was notably slower in CRA. Regarding shape, the proportion of fibers in the water within the CRA was significantly lower than that in the RA, with a smaller vertical migration rate in the water than in the sediment. The proportion of MPs < 500 μm in the water within the CRA was significantly higher than that in the RA. High-density MPs were notably deposited in the reservoir sediments. The analysis of the MP communities revealed that the construction of cascade dams led to relative geographical isolation between different sampling sites, reducing the similarity of MP communities in the CRA. This study established a theoretical foundation for understanding the impact of cascade dam construction on the fate characteristics of MPs and their potential risks in plateau areas.

Probabilistic risk assessment of microplastics on aquatic biota in coastal sediments

As an emerging form of pollution, microplastic contamination of the coastal ecosystems is one of the world's most pressing environmental concerns. Coastal sediments have been polluted to varying degrees by microplastics, and their ubiquitous presence in sediments poses a threat to marine organisms. However, there is currently no ecological risk assessment of microplastics on aquatic biota in sediments. This study, for the first time, established a new procedure to evaluate the toxicity of microplastics on aquatic biota in sediments, based on the probabilistic risk assessment (PRA) concept. The choice of Zhelin Bay as the case study site was based on its severe pollution status. The average content of microplastics in the sediments of Zhelin Bay was 2054.17 items kg-1 dry weight, and these microplastics consisted of 46 different species. Microplastics in sediments exist in five different forms, with the film form being the main composition, and the majority of microplastics have particle sizes ranging from 100 to 500 μm. Correlation analysis (CA) reveals significant negative correlations between microplastic abundance, and Al2O3 and SiO2. The toxicity of microplastics, based on the PRA concept, suggests that Zhelin Bay surface sediments had a low probability (3.43%) of toxic effects on aquatic biota.

Bibliometric analysis of global performance and trends of research on combined sewer overflows (CSOs) from 1990 to 2022

Combined sewer overflows (CSOs) are one of the main sources of pollution in urban water systems and significantly impede the restoration of water body functionalities within urban rivers and lakes. To understand the research and frontier trends of CSOs comprehensively and systematically, a visual statistical analysis of the literature related to CSOs in the Web of Science core database from 1990 to 2022 was conducted using the bibliometric method using HistCite Pro and VOSviewer. The results reveal a total of 1,209 pertinent publications related to CSOs from 1990 to 2022, and the quantity of CSOs-related publications indicated an increasing trend. Investigations of the distribution and fate of typical pollutants in CSOs and their ecological effects on receiving waters and studies on pollution control technologies (source reduction, process control, and end-of-pipe treatment) are the current focus of CSOs research. CSOs pollution control technologies based on source reduction and the monitoring and control of emerging contaminants are at the forefront of scientific investigations on CSOs. This study systematically and comprehensively summarized current research topics and future research directions of CSOs, thus providing a reference for CSOs control and water environment management research.

Long-term presence of microplastics in aerobic and anaerobic sequential batch reactors: Effect on treatment, microbial diversity, and microplastics morphology

Sewage treatment plants (STPs) are identified as the significant sink and source of microplastics (MPs) in aquatic bodies and terrestrial systems. A major fraction of MPs gets retained in STPs for a longer duration, and their potentiality for secondary MPs generation and additives leaching remain under investigated. Therefore, this study focussed on the effect of long-term exposure of aerobic and anaerobic biological sewage treatment units on MPs, along with the effect of MPs on treatment efficiency and microbial consortium. A mixture of polyvinyl chloride, polystyrene, and nylon MPs at 262 MPs/L was spiked in the aerobic and anaerobic sequential batch reactors (SBRs) for 120 days at the start of study. The study revealed a release of noteworthy fraction of secondary MPs into the reactors from spiked MPs. At the end of 120th day, the presence of secondary generated MPs was estimated as 1000 ± 71 MPs/L and 650±141 MPs/L in aerobic and anaerobic SBRs respectively. Most of the observed secondary MPs were of size < 300 µm. Leaching of additives, i.e. cyclohexylamine, cyclotetradecane, octadecanol, pipericine etc., into the SBR effluents were also observed. The depuration capacities of the reactors were not affected with the presence of MPs during the study. While the microbial diversity and abundance were negatively impacted in aerobic SBRs, no such impacts were observed in anaerobic SBRs due to MPs. These results do suggest such exposures to potentially cause secondary MPs and chemical pollution in receiving matrices for the treated effluent, as well as effect on the native microbial community.

Emerging isolation and degradation technology of microplastics and nanoplastics in the environment

Microplastics (MPs, less than 5 mm in size) are widely distributed in surroundings in various forms and ways, and threaten ecosystems security and human health. Its environmental behavior as pollutants carrier and the after-effects exposed to MPs has been extensively exploited; whereas, current knowledge on technologies for the separation and degradation of MPs is relatively limited. It is essential to isolate MPs from surroundings and/or degrade to safe levels. This in-depth review details the origin and distribution of MPs. Provides a comprehensive summary of currently available MPs separation and degradation technologies, and discusses the mechanisms, challenges, and application prospects of these technologies. Comparison of the contribution of various separation methods to the separation of NPs and MPs. Furthermore, the latest research trends and direction in bio-degradation technology are outlooked.

Efficient and accurate microplastics identification and segmentation in urban waters using convolutional neural networks

Microplastics (MPs), measuring less than 5 mm, pose threats to ecological security and human health in urban waters. Additionally, they act as carriers, transporting pollutants from terrestrial systems into oceanic circulation, contributing to global pollution. Recognizing the significance of identifying MPs in urban waters, one potential solution to the time-consuming and labor-intensive manual identification process is the application of a convolutional neural network (CNN). Therefore, having a reliable CNN model that efficiently and accurately identifies MPs is essential for extensive research on MPs pollution in urban waters. In this work, an MPs dataset with complex background was acquired from urban waters in southern China. The dataset was used to train and validate CNN models, including UNet, UNet2plus, and UNet3plus. Subsequently, the computational and inference performance of the three models was evaluated using a newly collected MPs dataset. The results showed that UNet, UNet2plus, UNet3plus, after being trained for 120 epochs, provided efficient inferences within less than 1 s, 2 s, and 3 s for 100 MPs images, respectively. Accurate segmentation with mIoU of 91.45 ± 5.93 % and 91.08 ± 6.18 % was achieved using UNet and UNet2plus, respectively, while UNet3plus exhibited a lower performance with only 82.21 ± 10.33 % mIoU. This work demonstrated that UNet and UNet2plus deliver efficient and accurate identification of MPs in urban waters. Developing CNN models that efficiently and accurately identify MPs is crucial for reducing manual time, especially in large-scale investigations of MPs pollution in urban waters.

Microplastic pollution in urban rivers within China's Danxia landforms: Spatial distribution characteristics, migration, and risk assessment

The potential deleterious effects of microplastics on environmental integrity and human health have elicited global attention. Particularly vulnerable to microplastics are Danxia landforms, characterized by their unique topographical features and ecologically fragile milieu. Notwithstanding, empirical studies assessing the prevalence of microplastics in these unique landforms remain strikingly limited. The present investigation comprehensively examined the abundance of microplastics in surface water, sediment, and groundwater across six cities and six counties within the Danxia landforms. Comparative analysis revealed a moderate level of microplastic contamination in the urban rivers of the Danxia region relative to other freshwater rivers. Anthropogenic activities, notably urban wastewater treatment and tourism, emerged as principal contributors to microplastic pollution. Sedimentary microplastics exhibited an accumulative trend from upstream to downstream locations. The risk assessment revealed a high potential ecological risk in counties and a moderate risk in cities. Cluster analysis suggested that groundwater microplastics were a confluence of hydraulic interactions between surface and subsurface waters within the Danxia region. This investigation elucidates the microplastic contamination profile, origins, migratory patterns, and associated risks in Danxia's urban rivers, thereby furnishing scientific underpinning for health and ecological preservation strategies within urbanized Danxia landscapes.

Urban stormwater microplastic size distribution and impact of subsampling on polymer diversity

Understanding not only microplastic (MP) concentration but also size distribution, morphology, and polymer profiles is desirable for stormwater, which is an important pathway of entry for MP into the aquatic environment. A challenge is that subsampling is often required for analysis of environmental samples and the impact of subsampling on the stormwater MP concentration determined and the polymer types identified is poorly characterized. To address this, MP were extracted from urban and suburban stormwater, including from green infrastructure. Fourier Transform Infrared microscopy was performed to characterize MP. In addition, particle dimensions and morphology were recorded. Varying the number of 63-250 μm particles subsampled per sample demonstrated the coefficient of variation for concentration (standard deviation/mean) for most samples was <0.3 when 20 particles (0.8-15% of total particles) or <0.2 when 30 particles (1.2-24% of total particles) per sample were analyzed. MP concentrations in the 63-250 μm size class ranged from 15 to 303 MP/L, one to two orders of magnitude greater than observed in previously reported paired samples from the 250-500 or 500-2000 μm size classes. A total of 25 plastic polymer types were observed across samples, more than observed in the large size classes. Spectral signatures of surface oxidation indicative of weathering were observed on most polyethylene, polypropylene, and polystyrene particles, which were the most abundant polymer types. Fragments were the dominant morphology with an average maximum length of 158 ± 92 μm. Overall, these results may help inform subsampling methods and be useful in future exposure assessments for aquatic organisms or design of MP removal technologies for urban and suburban stormwater.

Occurrences, sources, fate and impacts of plastic on aquatic organisms and human health in global perspectives: What Bangladesh can do in future?

Bangladesh is not an exception to the growing global environmental problem of plastic pollution. Plastics have been deemed a blessing for today's world thanks to their inexpensive production costs, low weight, toughness, and flexibility, but poor biodegradability and massive misuse of plastics are to blame for widespread contamination of the environmental components. Plastic as well as microplastic pollution and its adverse consequences have attracted significant investigative attention all over the world. Plastic pollution is a rising concern in Bangladesh, but scientific studies, data, and related information are very scarce in numerous areas of the plastic pollution problem. The current study examined the effects of plastic and microplastic pollution on the environment and human health, and it examined Bangladesh's existing knowledge of plastic pollution in aquatic ecosystems in light of the rapidly expanding international research in this field. We also made an effort to investigate the current shortcomings in Bangladesh's assessment of plastic pollution. This study proposed several management approaches to the persistent plastic pollution problem by analyzing studies from industrialized and emerging countries. Finally, this work pushed investigators to investigate Bangladesh's plastic contamination thoroughly and develop guidelines and policies to address the issue.