Characterizing risk assessments for the development of occupational exposure limits for engineered nanomaterials

The potential of Gol-e-Gohar iron ore mine airborne dust to induce toxicity in human lung A549 cells

Airborne particulates in iron ore mining are a risk factor for adverse human lung effects. In this study, fine particulates deposited on surfaces of about 1.5 m above the ground and 6 meters from a milling unit of the Gol-e-Gohar iron ore mine were collected through wipe sampling. Dust particles less than 5 µm in diameter were separated with an electronic sieve. Aliquots were prepared from the sieved iron ore dust estimated to be equivalent to respiratory exposure in the iron ore mill in the concentrations of 1, 5, 10, 50, 100, and 250 µg/mL, which were intended to represent equivalent inhaled doses from working one month to a working life (25 years) in the mine. The airborne concentration of respirable particles was about five times the threshold limit value given (TLV®) for iron oxide published by the American Conference of Governmental Industrial Hygienists. The in vitro toxicity range was estimated to be equivalent to an accumulated dose associated with working from one month to a working life in the mine. Treatment of the A549 cells resulted in decreased dehydrogenase activity and cell glutathione content and increased reactive oxygen species (ROS) generation, mitochondrial membrane permeability, and cell apoptosis-necrosis rates. The results of this study revealed the possibility of lung damage at cell doses for respirable airborne iron oxide particles estimated to be equivalent to accumulated lifetime exposures among Gol-e-Gohar miners. Further studies are recommended to investigate the effect of actual contaminants in the workplace on the occurrence of health effects on workers.

On the dose-response association of fine and ultrafine particles in an urban atmosphere: toxicological outcomes on bronchial cells at realistic doses of exposure at the Air Liquid Interface

Air pollution and particulate matter (PM) are the leading environmental cause of death worldwide. Exposure limits have lowered to increase the protection of human health; accordingly, it becomes increasingly important to understand the toxicological mechanisms on cellular models at low airborne PM concentrations which are relevant for actual human exposure. The use of air liquid interface (ALI) models, which mimic the interaction between airborne pollutants and lung epithelia, is also gaining importance in inhalation toxicological studies. This study reports the effects of ALI direct exposure of bronchial epithelial cells BEAS-2B to ambient PM1 (i.e. particles with aerodynamic diameter lower than 1 μm). Gene expression (HMOX, Cxcl-8, ATM, Gadd45-a and NQO1), interleukin (IL)-8 release, and DNA damage (Comet assay) were evaluated after 24 h of exposure. We report the dose-response curves of the selected toxicological outcomes, together with the concentration-response association and we show that the two curves differ for specific responses highlighting that concentration-response association may be not relevant for understanding toxicological outcomes. Noteworthy, we show that pro-oxidant effects may be driven by the deposition of freshly emitted particles, regardless of the airborne PM1 mass concentration. Furthermore, we show that reference airborne PM1 metrics, namely airborne mass concentration, may not always reflect the toxicological process triggered by the aerosol. These findings underscore the importance of considering different aerosol metrics to assess the toxicological potency of fine and ultrafine particles. To better protect human health additional metrics should be defined, than account for the properties of the entire aerosol mixture including specific as particle size (i.e. particles with aerodynamic diameter lower than 20 nm), the relevant aerosol sources (e.g., traffic combustion, secondary organic aerosol …) as well as their atmospheric processing (freshly emitted vs aged ones).

Inflammation related to inhalation of nano and micron sized iron oxides: a systematic review

Inhalation exposure to iron oxide occurs in many workplaces and respirable aerosols occur during thermal processes (e.g. welding, casting) or during abrasion of iron and steel products (e.g. cutting, grinding, machining, polishing, sanding) or during handling of iron oxide pigments. There is limited evidence of adverse effects in humans specifically linked to inhalation of iron oxides. This contrasts to oxides of other metals used to alloy or for coating of steel and iron of which several have been classified as being hazardous by international and national agencies. Such metal oxides are often present in the air at workplaces. In general, iron oxides might therefore be regarded as low-toxicity, low-solubility (LTLS) particles, and are often considered to be nontoxic even if very high and prolonged inhalation exposures might result in diseases. In animal studies, such exposures lead to cancer, fibrosis and other diseases. Our hypothesis was that pulmonary-workplace exposure during manufacture and handling of SPION preparations might be harmful. We therefore conducted a systematic review of the relevant literature to understand how iron oxides deposited in the lung are related to acute and subchronic pulmonary inflammation. We included one human and several in vivo animal studies published up to February 2023. We found 25 relevant studies that were useful for deriving occupational exposure limits (OEL) for iron oxides based on an inflammatory reaction. Our review of the scientific literature indicates that lowering of health-based occupational exposure limits might be considered.

Advances in the Interaction between Food-Derived Nanoparticles and the Intestinal Barrier

The maintenance of the intestinal barrier is crucial for the overall balance of the gut and the organism. Dysfunction of the intestinal barrier is closely associated with intestinal diseases. In recent years, due to the increased presence of nanoparticles (NPs) in the human diet, there has been a growing concern regarding the safety and potential impact of these NPs on gastrointestinal health. The interactions between food-derived NPs and the intestinal barrier are numerous. This review provides an introduction to the structure and function of the intestinal barrier along with a comprehensive summary of the interactions between food NPs and the intestinal barrier. Additionally, we highlight the potential connection between the food NPs-induced dysfunction of the intestinal barrier and inflammatory bowel disease. Finally, we discuss the enhancement of food NPs on the repair of the intestinal barrier damage and the nutrients absorption. This review holds significant importance in furthering our understanding of the regulatory mechanisms of food-derived NPs on the intestinal barrier.

Nanoparticles and neurodegeneration: Insights on multiple pathways of programmed cell death regulated by nanoparticles

Currently, nanoparticles (NPs) are extensively applied in the diagnosis and treatment of neurodegenerative diseases (NDs). With the rapid development and increasing exposure to the public, the potential neurotoxicity associated with NDs caused by NPs has attracted the researchers' attentions but their biosafety assessments are still far behind relevant application studies. Based on recent research, this review aims to conduct a comprehensive and systematic analysis of neurotoxicity induced by NPs. The 191 studies selected according to inclusion and exclusion criteria were imported into the software, and the co-citations and keywords of the included literatures were analyzed to find the breakthrough point of previous studies. According to the available studies, the routes of NPs entering into the normal and injured brain were various, and then to be distributed and accumulated in living bodies. When analyzing the adverse effects induced by NPs, we focused on multiple programmed cell deaths (PCDs), especially ferroptosis triggered by NPs and their tight connection and crosstalk that have been found playing critical roles in the pathogenesis of NDs and their underlying toxic mechanisms. The activation of multiple PCD pathways by NPs provides a scientific basis for the occurrence and development of NDs. Furthermore, the adoption of new methodologies for evaluating the biosafety of NPs would benefit the next generation risk assessment (NGRA) of NPs and their toxic interventions. This would help ensure their safe application and sustainable development in the field of medical neurobiology.

Carbon nanotube pathogenicity conforms to a unified theory for mesothelioma causation by elongate materials and fibers

The purpose of this review is to elucidate how dimensional and durability characteristics of high aspect ratio nanomaterials (HARN), including carbon nanotubes (CNT) and metal nanowires (MeNW), contribute to understanding the fiber pathogenicity paradigm (FPP), including by explaining the structure-activity relationships (SAR) of a diverse range of natural and synthetic elongate materials that may or may not contribute to mesothelioma development in the lung. While the FPP was originally developed to explain the critical importance of asbestos and synthetic vitreous fiber length, width, aspect ratio and biopersistence in mesothelioma development, there are a vast number of additional inhalable materials that need to be considered in terms of pathogenic features that may contribute to mesothelioma or lack thereof. Not only does the ability to exert more exact control over the length and biopersistence of HARNs confirm the tenets of the FPP, but could be studied by implementating more appropriate toxicological tools for SAR analysis. This includes experimentation with carefully assembled libraries of CNTs and MeNWs, helping to establish more precise dimensional features for interfering in lymphatic drainage from the parietal pleura, triggering of lysosomal damage, frustrated phagocytosis and generation of chronic inflammation. The evidence includes data that long and rigid, but not short and flexible multi-wall CNTs are capable of generating mesotheliomas in rodents based on an adverse outcome pathway requiring access to pleural cavity, obstruction of pleural stomata, chronic inflammation and transformation of mesothelial cells. In addition to durability and dimensional characteristics, bending stiffness of CNTs is a critical factor in determining the shape and rigidity of pathogenic MWCNTs. While no evidence has been obtained in humans that CNT exposure leads to a mesothelioma outcome, it is important to monitor exposure levels and health effect impacts in workers to prevent adverse health outcomes in humans.

Risk Assessment of Nanomaterials Toxicity

The increasing use of nanomaterials in almost every area of our daily life renders toxicological risk assessment a major requirement for their safe handling [...].

Release of particulate matter from nano-enabled building materials (NEBMs) across their lifecycle: Potential occupational health and safety implications

The present study investigates potential nanomaterial releases and occupational health risks across the lifecycle of nano-enabled building materials (NEBMs), namely, insulations and coatings. We utilized real-world degradation scenarios of a) sanding (mechanical), b) incineration (thermal), and c) accelerated UV-aging (environmental) followed by incineration. Extensive physicochemical characterization of the released lifecycle particulate matter (LCPM) was performed. The LCPM2.5 aerosol size fraction was used to assess the acute biological, cytotoxic and inflammatory effects on Calu-3 human lung epithelial cells. RNA-Seq analysis of exposed cells was performed to assess potential for systemic disease. Findings indicated that release dynamics and characteristics of LCPM depended on both the NEBM composition and the degradation scenario(s). Incineration emitted a much higher nanoparticle number concentration than sanding (nearly 4 orders of magnitude), which did not change with prior UV-aging. Released nanofillers during sanding were largely part of the matrix fragments, whereas those during incineration were likely physicochemically transformed. The LCPM from incineration showed higher bioactivity and inflammogenicity compared to sanding or sequential UV-aging and incineration, and more so when metallic nanofillers were present (such as Fe2O3). Overall, the study highlights the need for considering real-world exposure and toxicological data across the NEBM lifecycle to perform adequate risk assessments and to ensure workplace health and safety.

Plant-derived nanotherapeutic systems to counter the overgrowing threat of resistant microbes and biofilms

Since antiquity, the survival of human civilization has always been threatened by the microbial infections. An alarming surge in the resistant microbial strains against the conventional drugs is quite evident in the preceding years. Furthermore, failure of currently available regimens of antibiotics has been highlighted by the emerging threat of biofilms in the community and hospital settings. Biofilms are complex dynamic composites rich in extracellular polysaccharides and DNA, supporting plethora of symbiotic microbial life forms, that can grow on both living and non-living surfaces. These enforced structures are impervious to the drugs and lead to spread of recurrent and non-treatable infections. There is a strong realization among the scientists and healthcare providers to work out alternative strategies to combat the issue of drug resistance and biofilms. Plants are a traditional but rich source of effective antimicrobials with wider spectrum due to presence of multiple constituents in perfect synergy. Other than the biocompatibility and the safety profile, these phytochemicals have been repeatedly proven to overcome the non-responsiveness of resistant microbes and films via multiple pathways such as blocking the efflux pumps, better penetration across the cell membranes or biofilms, and anti-adhesive properties. However, the unfavorable physicochemical attributes and stability issues of these phytochemicals have hampered their commercialization. These issues of the phytochemicals can be solved by designing suitably constructed nanoscaled structures. Nanosized systems can not only improve the physicochemical features of the encapsulated payloads but can also enhance their pharmacokinetic and therapeutic profile. This review encompasses why and how various types of phytochemicals and their nanosized preparations counter the microbial resistance and the biofouling. We believe that phytochemical in tandem with nanotechnological innovations can be employed to defeat the microbial resistance and biofilms. This review will help in better understanding of the challenges associated with developing such platforms and their future prospects.

NanoSafe III: A User Friendly Safety Management System for Nanomaterials in Laboratories and Small Facilities

Research in nanoscience continues to bring forward a steady stream of new nanomaterials and processes that are being developed and marketed. While scientific committees and expert groups deal with the harmonization of terminology and legal challenges, risk assessors in research labs continue to have to deal with the gap between regulations and rapidly developing information. The risk assessment of nanomaterial processes is currently slow and tedious because it is performed on a material-by-material basis. Safety data sheets are rarely available for (new) nanomaterials, and even when they are, they often lack nano-specific information. Exposure estimations or measurements are difficult to perform and require sophisticated and expensive equipment and personal expertise. The use of banding-based risk assessment tools for laboratory environments is an efficient way to evaluate the occupational risks associated with nanomaterials. Herein, we present an updated version of our risk assessment tool for working with nanomaterials based on a three-step control banding approach and the precautionary principle. The first step is to determine the hazard band of the nanomaterial. A decision tree allows the assignment of the material to one of three bands based on known or expected effects on human health. In the second step, the work exposure is evaluated and the processes are classified into three "nano" levels for each specific hazard band. The work exposure is estimated using a laboratory exposure model. The result of this calculation in combination with recommended occupational exposure limits (rOEL) for nanomaterials and an additional safety factor gives the final "nano" level. Finally, we update the technical, organizational, and personal protective measures to allow nanomaterial processes to be established in research environments.

Ovarian toxicity of nanoparticles

The ovary is a highly important organ for female reproduction. The main functions include sex steroid hormone synthesis, follicular development, and achievement of oocyte meiotic and development competence for proper fertilization. Nanoparticle (NP) exposure is becoming unavoidable because of its wide use in different products, including cosmetics, food, health, and personal care products. Studies examining different nonreproductive tissues or systems have shown that characteristics such as the size, shape, core material, agglomeration, and dissolution influence the effects of NPs. However, most studies evaluating NP-mediated reproductive toxicity have paid little or no attention to the influence of the physicochemical characteristics of NP on the observed effects. As accumulating evidence indicates that NP may reach the ovary to impair proper functions, this review summarizes the available data on NP accumulation in ovarian tissue, as well as data describing toxicity to ovarian functions, including sex steroid hormone production, follicular development, oocyte quality, and fertility. Due to their toxicological relevance, this review also describes the main physicochemical characteristics involved in NP toxicity and the importance of considering NP physicochemical characteristics as factors influencing the ovarian toxicity of NPs. Finally, this review summarizes the main mechanisms of toxicity described in ovarian cells.

Can nanomaterials induce reproductive toxicity in male mammals? A historical and critical review

The nanotechnology enabled the development of nanomaterials (NMs) with a variety of industrial, biomedical, and consumer applications. However, the mechanism of action (MoA) and toxicity of NMs remain unclear, especially in the male reproductive system. Thus, this study aimed to perform a bibliometric and systematic review of the literature on the toxic effects of different types of NMs on the male reproductive system and function in mammalian models. A series of 236 articles related to the in vitro and in vivo reproductive toxicity of NMs in mammalian models were analyzed. The data concerning the bioaccumulation, experimental conditions (types of NMs, species, cell lines, exposure period, and routes of exposure), and the MoA and toxicity of NMs were summarized and discussed. Results showed that this field of research began in 2005 and has experienced an exponential increase since 2012. Revised data confirmed that the NMs have the ability to cross the blood-testis barrier and bioaccumulate in several organs of the male reproductive system, such as testis, prostate, epididymis, and seminal vesicle. A similar MoA and toxicity were observed after in vitro and in vivo exposure to NMs. The NM reproductive toxicity was mainly related to ROS production, oxidative stress, DNA damage and apoptosis. In conclusion, the NM exposure induces bioaccumulation and toxic effects on male reproductive system of mammal models, confirming its potential risk to human and environmental health. The knowledge concerning the NM reproductive toxicity contributes to safety and sustainable use of nanotechnology.

Toxicological Consequences of Titanium Dioxide Nanoparticles (TiO2NPs) and Their Jeopardy to Human Population

Titanium dioxide nanoparticles (TiO2 NPs) are the most produced nanomaterial for food additives, pigments, photocatalysis, and personal care products. These nanomaterials are at the forefront of rapidly developing indispensable nanotechnology. In all these nanomaterials, titanium dioxide (TiO2) is the most common nanomaterial which is being synthesized for many years. These nanoparticles of TiO2 are widely used at the commercial level, especially in cosmetic industries. High usage in such a way has increased the toxicological consequences of the human population. Several studies have shown that TiO2 NPs accumulated after oral exposure or inhalation in the alimentary canal, lungs, heart, liver, spleen, cardiac muscle, and kidneys. Additionally, in mice and rats, they disturb glucose and lipid homeostasis. Moreover, TiO2 nanoparticles primarily cause adverse reactions by inducing oxidative stress that leads to cell damage, inflammation, genotoxicity, and adverse immune responses. The form and level of destruction are strongly based on the physical and chemical properties of TiO2 nanoparticles, which administer their reactivity and bioavailability. Studies give indications that TiO2 NPs cause both DNA strand breaks and chromosomal damages. The effects of genotoxicity do not depend only on particle surface changes, size, and exposure route, but also relies on the duration of exposure. Most of these effects may be because of a very high dose of TiO2 NPs. Despite increased production and use, epidemiological data for TiO2 NPs is still missing. This review discusses previous research regarding the impact of TiO2 NP toxicity on human health and highlights areas that require further understanding in concern of jeopardy to the human population. This review is important to point out areas where extensive research is needed; thus, their possible impact on individual health should be investigated in more details.

Untargeted metabolomics for Achilles heel of engineered nanomaterials' risk assessment

Owing to the superlative properties, engineered nanomaterials (ENM) are being used in food, cosmetics, medicine, and electronics. Therefore, exogenous ENM can be housed into humans through a multitude of exposure routes, leading to compromise of the biomolecules' functionalities through structural deformations, and even at the metabolic level. Consequently, it is of great importance to understand the perturbations introduced at the metabolic level for the timely risk assessment (RA) of ENM. Current technological advancements in metabolomics empower us to visualize the metabolic dysregulations in biological cells, tissues, and living objects, instigated by the ENM. Given the fact, we propose multitiered untargeted metabolomics for the risk assessment of ENM. We propose largely validated experimental design principles that enable the well-organized and authentic identification of metabolic dysregulation connected with a newly engineered nanomaterial. Our scheme could participate in the enhanced transparency of the RA course of rapidly emerging ENM.

Silver Nanoparticles Induce DNA Hypomethylation through Proteasome-Mediated Degradation of DNA Methyltransferase 1

Nanoparticles are used in many fields and in everyday products. Silver nanoparticles are the most frequently used nanoparticles; for example, in food-related products, owing to their antibacterial activity. However, it has been pointed out that they might have unexpected biological effects, and evaluation of their effects is underway. Although there is a growing body of evidence that nanoparticles can also induce epigenetic changes, there is still little information on the underlying mechanisms. Here, we evaluated changes in DNA methylation induced by silver nanoparticles and attempted to elucidate the induction mechanism. Immunofluorescence staining analysis revealed that silver nanoparticles with a diameter of 10, 50, or 100 nm (nAg10, nAg50, and nAg100, respectively) decreased the content of methylated DNA in A549 alveolar epithelial cells. The level of DNA methyltransferase 1 (Dnmt1) protein, which is involved in maintaining methylation during DNA replication, was significantly decreased, whereas that of Dnmt3b, which is responsible for de novo DNA methylation, was significantly increased by nAg10 treatment. Co-treatment with nAg10 and cycloheximide, which inhibits translation by inhibiting the translocation step of protein synthesis, decreased the level of Dnmt1 in comparison with nAg10-treated A549 cells, indicating a post-translational effect of nAg10. Furthermore, pretreatment with the proteasome inhibitor lactacystin restored the levels of Dnmt1 protein and DNA methylation in nAg10-treated cells. Collectively, these results suggest that nAg10 induced DNA hypomethylation through a proteasome-mediated degradation of Dnmt1.

Oxidative stress induced by occupational exposure to nanomaterials: a systematic review

The rapid growth of nanotechnology has increased the occupational exposure to nanomaterials. On the other hand, a growing body of evidence considers exposure to these materials to be hazardous. Therefore, it is necessary to examine the effects of occupational exposure to these materials by different methods. Biological monitoring, especially the investigation of oxidative stress induced by exposure to nanomaterials, can provide useful information for researchers. This study systematically reviews studies that have investigated oxidative stress caused by occupational exposure to nanomaterials. The search was conducted on the PubMed, Scopus and Web of Science databases. Of the 266 studies we obtained in our initial search, eventually 11 were included in our study. There is currently no specific biomarker for investigating oxidative stress induced by exposure to nanomaterials. Therefore, the reviewed studies have used different biomarkers in different biological fluids for this purpose. Also, the methods of assessing occupational exposure to nanomaterials in the investigated studies were very diverse. Given the approach of the investigated studies to biomarkers and exposure assessment methods, finding a specific biomarker for investigating exposure to nanomaterials seems unattainable. But reaching a group of biomarkers, to assess exposure to nanomaterials seems more applicable and achievable.

Recent Developments in the Application of Nanomaterials in Agroecosystems

Nanotechnology implies the scientific research, development, and manufacture, along with processing, of materials and structures on a nano scale. Presently, the contamination of metalloids and metals in the soil has gained substantial attention. The consolidation of nanomaterials and plants in ecological management has received considerable research attention because certain nanomaterials could enhance plant seed germination and entire plant growth. Conversely, when the nanomaterial concentration is not properly controlled, toxicity will definitely develop. This paper discusses the role of nanomaterials as: (1) nano-pesticides (for improving the plant resistance against the biotic stress); and (2) nano-fertilizers (for promoting the plant growth by providing vital nutrients). This review analyzes the potential usages of nanomaterials in agroecosystem. In addition, the adverse effects of nanomaterials on soil organisms are discussed. We mostly examine the beneficial effects of nanomaterials such as nano-zerovalent iron, iron oxide, titanium dioxide, nano-hydroxyapatite, carbon nanotubes, and silver- and copper-based nanomaterials. Some nanomaterials can affect the growth, survival, and reproduction of soil organisms. A change from testing/using nanomaterials in plants for developing nanomaterials depending on agricultural requirements would be an important phase in the utilization of nanomaterials in sustainable agriculture. Conversely, the transport as well as ecological toxicity of nanomaterials should be seriously examined for guaranteeing its benign usage in agriculture.

Sustainable Use of Nanomaterials in Textiles and Their Environmental Impact

At present, nanotechnology is a priority in research in several nations due to its massive capability and financial impact. However, due to the uncertainties and abnormalities in shape, size, and chemical compositions, the existence of certain nanomaterials may lead to dangerous effects on the human health and environment. The present review includes the different advanced applications of nanomaterials in textiles industries, as well as their associated environmental and health risks. The four main textile industry fields using nanomaterials, nanofinishing, nanocoatings, nanofibers, and nanocomposites, are analyzed. Different functional textiles with nanomaterials are also briefly reviewed. Most textile materials are in direct and prolonged contact with our skin. Hence, the influence of carcinogenic and toxic substances that are available in textiles must be comprehensively examined. Proper recognition of the conceivable benefits and accidental hazards of nanomaterials to our surroundings is significant for pursuing its development in the forthcoming years. The conclusions of the current paper are anticipated to increase awareness on the possible influence of nanomaterial-containing textile wastes and the significance of better regulations in regards to the ultimate disposal of these wastes.

Experimental Application of Semi-Quantitative Methods for the Assessment of Occupational Exposure to Hazardous Chemicals in Research Laboratories

Purpose

The aim of this study was to evaluate the application of some chemical risk assessment semi-quantitative methods and also to identify potential bias or differences originated by applying different methods to the same activities.

Methods

We collected the data related to the chemical agents used in three different activities of three laboratories of an Italian university; the methods we compared were: MoVaRisCh, COSHH Essentials, LaboRisCh and Datarisch.

Results

The input parameters requested by each method are shown for each activity and for each used chemical. We collected the results obtained since the application of the four different tools in three tables. The use of some chemicals (especially of the activity n° three) shows a not irrelevant risk for the users.

Conclusion

Our findings show that COSHH Essentials, MoVaRisCh and Datarisch tools are consistent in the identification of a risk level; the small differences are related to risk rating, to be considered in relation with the specific structure of the method applied. The differences detected in the risk rating may be overcome by applying, for each working activity we want to assess, two or more different semi-quantitative tools. This strategy can allow to reduce the exposure to chemicals of the workers.

Impaired mitochondrial function of alveolar macrophages in carbon nanotube-induced chronic pulmonary granulomatous disease

Human exposure to carbon nanotubes (CNT) has been associated with the development of pulmonary sarcoid-like granulomatous disease. Our previous studies demonstrated that multi-walled carbon nanotubes (MWCNT) induced chronic pulmonary granulomatous inflammation in mice. Granuloma formation was accompanied by decreased peroxisome proliferator-activated receptor gamma (PPARγ) and disrupted intracellular lipid homeostasis in alveolar macrophages. Others have shown that PPARγ activation increases mitochondrial fatty acid oxidation (FAO) to reduce free fatty acid accumulation. Hence, we hypothesized that the disrupted lipid metabolism suppresses mitochondrial FAO. To test our hypothesis, C57BL/6 J mice were instilled by an oropharyngeal route with 100 μg MWCNT freshly suspended in 35 % Infasurf. Control sham mice received vehicle alone. Sixty days following instillation, mitochondrial FAO was measured in permeabilized bronchoalveolar lavage (BAL) cells. MWCNT instillation reduced the mitochondrial oxygen consumption rate of BAL cells in the presence of palmitoyl-carnitine as mitochondrial fuel. MWCNT also reduced mRNA expression of mitochondrial genes regulating FAO, carnitine palmitoyl transferase-1 (CPT1), carnitine palmitoyl transferase-2 (CPT2), hydroxyacyl-CoA dehydrogenase subunit beta (HADHB), and PPARγ coactivator 1 alpha (PPARGC1A). Importantly, both oxidative stress and apoptosis in alveolar macrophages and lung tissues of MWCNT-instilled mice were increased. Because macrophage PPARγ expression has been reported to be controlled by miR-27b which is known to induce oxidative stress and apoptosis, we measured the expression of miR-27b. Results indicated elevated levels in alveolar macrophages from MWCNT-instilled mice compared to controls. Given that inhibition of FAO and apoptosis are linked to M1 and M2 macrophage activation, respectively, the expression of both M1 and M2 key indicator genes were measured. Interestingly, results showed that both M1 and M2 phenotypes of alveolar macrophages were activated in MWCNT-instilled mice. In conclusion, alveolar macrophages of MWCNT-instilled mice had increased miR-27b expression, which may reduce the expression of PPARγ resulting in attenuation of FAO. This reduction in FAO may lead to activation of M1 macrophages. The upregulation of miR-27b may also induce apoptosis, which in turn can cause M2 activation of alveolar macrophages. These observations indicate a possible role of miR-27b in impaired mitochondrial function in the chronic activation of alveolar macrophages by MWCNT and the development of chronic pulmonary granulomatous inflammation.

PBPK Modeling of Slightly Soluble Silver Nanomaterials and Regulatory Acceptance

International efforts to promote predictive toxicology incorporate some form of modeling based on the regularities, insights, and hypotheses gained from analyzing laboratory studies compiled in databases. While there has been a broad commentary on definitions, metadata, and test methodologies, all necessary to establishing data repositories, there has been less on translating the resulting insights into computational models. The recent use of a computational model to support a recommended exposure limit for nanoparticulate silver is an opportunity to examine physiologically based toxicokinetics in terms of data availability, model verification and validation, and regulatory acceptance. The resulting suggestions align with findings from the EU-US Roadmap Nanoinformatics 2030 and the 2018 acceptance of a computational model by the European Food Safety Authority.

Health and Safety Concerns Related to CNT and Graphene Products, and Related Composites

The use of Carbon Nanotubes (CNT) and Graphene increased in the last decade and it is likely to keep increasing in the near future. The attractiveness of their properties, particularly the possibility to enhance the composites performance using a tailor made methodology, brings new materials, processes and products for highly demanding industrial applications and to the market. However, there are quite a lot of health/safety issues, as well as lack of understanding and standards to evaluate their effects. This paper starts with a general description of materials, processes and products dealing with CNT and graphene. Then, an overview of concerns related to the health and safety when handling, researching, producing and using products that include these materials is presented. It follows a risk management approach with respect to simulation and evaluation tools, and considering the consensual limits already existing for research, industry and consumers. A general discussion integrating the relevant aspects of health and safety with respect to CNT and graphene is also presented. A proactive view is presented with the intention to contribute with some guidelines on installation, maintenance, evaluation, personal protection equipment (PPE) and personnel training to deal with these carbon-based nanomaterials in research, manufacture, and use with composite materials.

Multi-walled carbon nanotubes (MWCNTs) transformed THP-1 macrophages into foam cells: Impact of pulmonary surfactant component dipalmitoylphosphatidylcholine

Pulmonary surfactant or its components can function as barriers toward nanomaterials (NMs) entering pulmonary systems. However, since pulmonary surfactant mainly consists of lipids, it may be necessary to investigate the effects of co-exposure to NMs and pulmonary surfactant or its components on lipid metabolism and related signaling pathways. Recently we found that multi-walled carbon nanotubes (MWCNTs) transformed THP-1 macrophages into lipid-laden foam cells via ER stress pathway. Here this study further investigated the impact of pulmonary surfactant component dipalmitoylphosphatidylcholine (DPPC) on this process. Up to 64 μg/mL hydroxylated or carboxylated MWCNTs induced lipid accumulation and IL-6 release in THP-1 macrophages, accompanying with increased oxidative stress and p-chop proteins (biomarker for ER stress). Incubation with 100 μg/mL DPPC led to MWCNT surface coating but did not significantly alter MWCNT internalization, lipid burden or IL-6 release. However, lipidomics indicated that DPPC altered lipid profliles in MWCNT-exposed cells. DPPC also led to a higher level of de novo lipogenesis regulator FASN in cells exposed to hydroxylated MWCNTs, as well as a higher level of p-chop and scavenger receptor MSR1 in cells exposed to carboxylated MWCNTs. Combined, DPPC did not significantly affect MWCNT-induced lipid accumulation but altered lipid components and ER stress in macrophages.

Nanoparticles: An Experimental Study of Zinc Nanoparticles Toxicity on Marine Crustaceans. General Overview on the Health Implications in Humans

The presence of products containing nanoparticles or nanofibers is rapidly growing. Nanotechnology involves a wide spectrum of industrial fields. There is a lack of information regarding the toxicity of these nanoparticles in aqueous media. The potential acute toxicity of ZnO NPs using two marine crustacean species: the copepod Tigriopus fulvus and the amphypod Corophium insidiosum was evaluated. Acute tests were conducted on adults of T. Fulvus nauplii and C. insidiosum. Both test species were exposed for 96 h to 5 increasing concentrations of ZnO NPs and ZnSO4H2O, and the endpoint was mortality. Statistical analysis revealed that the mean LC50 values of both ZnO NPs and ZnSO4H2O (ZnO NPs: F = 59.42; P < 0.0015; ZnSO4H2O: F = 25.57; P < 0.0015) were significantly lower for Tigriopus fulvus than for Corophium insidiosum. This result confirms that the toxic effect could be mainly attributed to the Zn ions, confirming that the dissolution processes play a crucial role in the toxicity of the ZnO NPs.

In vitro and in vivo toxicological evaluation of transition metal-doped titanium dioxide nanoparticles: Nickel and platinum

Transition metal-doped titanium dioxide nanoparticles (M-TiO₂ NPs) have been studied to enhance the activity of TiO₂ NPs in biomedical applications. In this study, in vitro and in vivo toxicological aspects of M-TiO₂ NPs were reported to assess the safety of these materials. M-TiO₂ NPs were synthesized via a photo-deposition technique. Nickel (Ni) and platinum (Pt) were used as dopants. Physicochemical properties, cytotoxicity, phototoxicity, gene ontology (GO) and dermal toxicity of M-TiO₂ NPs were investigated. Ni-TiO₂ (Ni, 1.02%) and Pt-TiO₂ (Pt, 0.26%) NPs were sphere shape crystals with nanoscale size. ARPE-19 cells were more susceptible to Pt-TiO₂ NPs (EC50, 0.796 mg/mL) than Ni-TiO₂ NPs (EC50, 2.945 mg/mL). M-TiO₂ NPs were rated as probably phototoxic to phototoxic. GO suggested binding function and metabolic processes as a risk mechanism of M-TiO₂ NPs. In vivo toxicological effects of Ni-TiO₂ NPs were not observed on body weight, serum aspartate transaminase/alanine transaminase levels, and skin histology at 61.5-6150 mg/kg. Specifically, skin thickness was not significantly modified (max. 33.2 ± 8.7 μm) and inflammation grade was less than level 2 (max. 1.2 ± 0.4). From these results, Ni-TiO₂ and Pt-TiO₂ NPs show promise as enhanced photocatalysts for safe and sustainable usage.

International landscape of limits and recommendations for occupational exposure to engineered nanomaterials

The increasing concern of possible adverse effects on human health derived from occupational engineered nanomaterials (ENMs) exposure is an issue addressed by entities related to provide guidelines and/or protocols for ENMs regulation. Here we analysed 17 entities from America, Europe and Asia, and some of these entities provide limits of exposure extrapolated from the non-nanosized counterparts of ENMs. The international landscape shows that recommendations are mostly made for metal oxide based ENMs and tonnage is one of the main criteria for ENMs registration, however, sub-nanometric ENMs are emerging and perhaps a novel category of ENMs will appear soon. We identify that besides the lack of epidemiological evidence of ENMs toxicity in humans and difficulties in analysing the toxicological data derived from experimental models, the lack of information on airborne concentrations of ENMs in occupational settings is an important limitation to improve the experimental designs. The development of regulations related to ENMs exposure would lead to provide safer work places for ENMs production without delaying the nanotechnology progress but will also help to protect the environment by taking opportune and correct measures for nanowaste, considering that this could be a great environmental problem in the coming future.

An Exploratory Assessment of Applying Risk Management Practices to Engineered Nanomaterials

The widespread industrial application of nanotechnology has increased the number of workers exposed to engineered nanomaterials (ENMs), but it is not clear to what extent prevention guidance is practiced. Our aim was to explore the extent that companies manufacturing and/or using ENMs apply risk assessment and management measures. Thirty-four companies were surveyed with an international 35-item questionnaire investigating company and workforce features, types of ENM handled, and risk evaluation and preventive measures adopted. Among participating companies, 62% had a maximum of 10 employees. Metal-based nanomaterials were most frequently identified (73%). Environmental monitoring was performed by 41% of the companies, while engineering exposure controls were approximately reported by 50%. Information and training programs were indicated by 85% of the sample, only 9% performed specific health surveillance for ENM workers. Personal protective equipment primarily included gloves (100%) and eye/face protection (94%). This small-scale assessment can contribute to the limited amount of published literature on the topic. Future investigations should include a greater number of companies to better represent ENM workplaces and a direct access to industrial settings to collect information on site. Finally, deeper attention should be paid to define standardized frameworks for ENM risk assessment that may guide nano-specific preventive actions.

Risk Analysis of Cellulose Nanomaterials by Inhalation: Current State of Science

Cellulose nanomaterials (CNs) are emerging advanced materials with many unique properties and growing commercial significance. A life-cycle risk assessment and environmental health and safety roadmap identified potential risks from inhalation of powdered CNs in the workplace as a key gap in our understanding of safety and recommended addressing this data gap to advance the safe and successful commercialization of these materials. Here, we (i) summarize the currently available published literature for its contribution to our current understanding of CN inhalation hazard and (ii) evaluate the quality of the studies for risk assessment purposes using published study evaluation tools for nanomaterials to assess the weight of evidence provided. Our analysis found that the quality of the available studies is generally inadequate for risk assessment purposes but is improving over time. There have been some advances in knowledge about the effects of short-term inhalation exposures of CN. The most recent in vivo studies suggest that short-term exposure to CNs results in transient inflammation, similarly to other poorly soluble, low toxicity dusts such as conventional cellulose, but is markedly different from fibers with known toxicity such as certain types of multiwalled carbon nanotubes or asbestos. However, several data gaps remain, and there is still a lack of understanding of the effects from long-term, low-dose exposures that represent realistic workplace conditions, essential for a quantitative assessment of potential health risk. Therefore, taking precautions when handling dry forms of CNs to avoid dust inhalation exposure is warranted.