Fast isotropic banding-free bSSFP imaging using 3D dynamically phase-cycled radial bSSFP (3D DYPR-SSFP)

Fast T2 mapping of short-T2 tissues in knee using 3D radial dual-echo balanced steady-state free precession

BACKGROUND

T2 mapping of short-T2 tissues in the knee (meniscus, tendon, and ligament) is needed to aid the clinical MRI knee diagnosis, which is hard to realize using traditional clinical methods.

PURPOSE

To accelerate the acquisition of T2 values for short-T2 tissues in the knee by analyzing the signal equation of balanced steady-state free precession (bSSFP) sequence in MRI.

METHODS

Effect of half-radial acquisition on pixel bandwidth was analyzed mathematically. A modified 3D radial dual-echo bSSFP sequence was proposed for 0.53 mm isotropic resolution knee imaging with 2 different TEs at 3 T, which alleviated the problem of off-resonance artifacts caused by traditional half-radial acquisition scheme. A novel pixel-based optimization method was proposed for efficient T2 mapping of short-T2 tissues in the knee given off-resonance values. Simulation was conducted to evaluate the sensitivity of the proposed method to other parameters. Phantom results were compared with 2D spin-echo (SE), and in vivo results were compared with SE and previously studies.

RESULTS

Simulation showed that the proposed method is insensitive to T1 and B1 variations (estimation error < 1% for T1/B1 error of ±90%), avoiding the need for separated T1 and B1 scans. High isotropic resolution knee imaging was achieved using the modified dual-echo bSSFP. The total scan time was within 3.5 min, including a separate off-resonance scan for T2 measurement. Measured mean T2 values for phantoms correlated well with SE (R2 = 0.99), and no significant difference was observed (P = 0.45). In vivo meniscus T2 measurements and ligament T2 measurements agreed with the literature, while tendon T2 measurements were much lower (31.7% lower for patellar tendon, and 13.5% lower for quadriceps tendon), which might result in its bi-component property.

CONCLUSIONS

The proposed method provides an efficient way for fast, robust, high-resolution imaging and T2 mapping of short-T2 tissues in the knee.

Noninvasive liver iron quantification by MRI using refocused gradient-echo (bSSFP): preliminary results

PURPOSE

To evaluate the feasibility of using a balanced steady-state free precession sequence (bSSFP) to determine liver iron content (LIC).

METHOD

Thirty-five consecutive patients with liver iron overload were examined with bSSFP. Signal intensity ratios of liver parenchyma to paraspinal muscles were retrospectively correlated with LIC values obtained by FerriScan, which was used as the reference method. Combinations of bSSFP protocols were also evaluated. The best combination was utilized to calculate LIC from bSSFP data. The sensitivity and specificity for the therapeutically relevant LIC threshold of 80 µmol/g (4.5 mg/g) were determined.

RESULTS

LIC values ranged from 24 to 756 µmol/g. The best SIR-to-LIC correlation of a single protocol was obtained with a 3.5-ms repetition time (TR) and 17° excitation flip angle (FA). A combination of protocols with TRs of 3.5, 5, and 6.5 ms, each at 17° FA, yielded a superior correlation. LIC values calculated using this combination resulted in a sensitivity/specificity of 0.91/0.85.

CONCLUSION

bSSFP is basically suitable to determine LIC. Its advantages are high SNR efficiency and the ability to acquire the entire liver in a breath hold without acceleration techniques.

KEY POINTS

· The bSSFP sequence is suited to quantify liver iron overload.. · bSSFP has a high scanning efficiency and potential for LIC screening.. · Despite susceptibility artifacts, the LIC determined from bSSFP data showed high accuracy..

CITATION FORMAT

· Wunderlich AP, Cario H, Götz M et al. Noninvasive liver iron quantification by MRI using refocused gradient-echo (bSSFP): preliminary results. Fortschr Röntgenstr 2023; 195: 804 - 808.

Rapid high-resolution volumetric T1 mapping using a highly accelerated stack-of-stars Look Locker technique

PURPOSE

To develop a fast volumetric T1 mapping technique.

MATERIALS AND METHODS

A stack-of-stars (SOS) Look Locker technique based on the acquisition of undersampled radial data (>30× relative to Nyquist) and an efficient multi-slab excitation scheme is presented. A principal-component based reconstruction is used to reconstruct T1 maps. Computer simulations were performed to determine the best choice of partitions per slab and degree of undersampling. The technique was validated in phantoms against reference T1 values measured with a 2D Cartesian inversion-recovery spin-echo technique. The SOS Look Locker technique was tested in brain (n = 4) and prostate (n = 5). Brain T1 mapping was carried out with and without kz acceleration and results between the two approaches were compared. Prostate T1 mapping was compared to standard techniques. A reproducibility study was conducted in brain and prostate. Statistical analyses were performed using linear regression and Bland Altman analysis.

RESULTS

Phantom T1 values showed excellent correlations between SOS Look Locker and the inversion-recovery spin-echo reference (r2 = 0.9965; p < 0.0001) and between SOS Look Locker with slab-selective and non-slab selective inversion pulses (r2 = 0.9999; p < 0.0001). In vivo results showed that full brain T1 mapping (1 mm3) with kz acceleration is achieved in 4 min 21 s. Full prostate T1 mapping (0.9 × 0.9 × 4 mm3) is achieved in 2 min 43 s. T1 values for brain and prostate were in agreement with literature values. A reproducibility study showed coefficients of variation in the range of 0.18-0.2% (brain) and 0.15-0.18% (prostate).

CONCLUSION

A rapid volumetric T1 mapping technique was developed. The technique enables high-resolution T1 mapping with adequate anatomical coverage in a clinically acceptable time.

Interleaved, undersampled radial multiple-acquisition steady-state free precession for improved left atrial cine imaging

PURPOSE

Balanced steady-state free precession (bSSFP) left atrial (LA) cine suffers from off-resonance artifacts, particularly in the pulmonary veins (PVs). Linear combination or multiple-acquisition SSFP (MA-SSFP) effectively removes banding but greatly increases scan time. We hypothesized that MA-SSFP with interleaved radial undersampling, where each phase-cycling is acquired with an interleaved set of radial projections, would improve image quality of LA cine with a small increase of scan time and streak artefacts.

METHODS

Undersampled radial MA-SSFP with and without interleaving was compared with fully sampled radial bSSFP by means of simulations, phantoms, and in vivo imaging. Ten healthy subjects were imaged on a 3T scanner, with bSSFP and MA-SSFP cine of the left atrium, and B0-mapping. Images were assessed (1 = worst, 5 = best) by 2 independent readers, with respect to 5 qualitative criteria and apparent signal-to-noise ratio.

RESULTS

In healthy subjects, off-resonance differed from the right inferior PVs to the LA cavity by 163 Hz ± 73 Hz at 3T. Compared with fully sampled radial bSSFP, interleaved radial MA-SSFP significantly improved image quality with respect to off-resonance artifacts (3.8 ± 0.6 versus 2.3 ± 1.0; P = 0.005), PV conspicuity (2.8 ± 1.0 versus 4.3 ± 0.5; P = 0.005), and the number of visualized PVs (1.7 ± 0.4 versus 0.9 ± 0.7; P = 0.008), although with greater streak artifacts (3.4 ± 0.4 versus 4.9 ± 0.2; P = 0.004) and lower measured apparent signal-to-noise ratio (24 ± 9 versus 69 ± 36; P = 0.002). Flow artifacts were similar. Interleaved radial MA-SSFP reduced streaking artifacts and increased apparent signal-to-noise ratio versus noninterleaved radial.

CONCLUSIONS

Interleaved radial MA-SSFP cine reduces banding artifacts with an acceptable increase of scan time and streak artifacts. The proposed technique improves the LA and PV visualization in bSSFP cine imaging.

Multi-slice passband bSSFP for human and rodent fMRI at ultra-high field

Balanced steady-state free precession (bSSFP) can be used as an alternative to gradient-echo (GE) EPI for BOLD functional MRI when image distortions and signal drop-outs are severe such as at ultra-high field. However, 3D-bSSFP acquisitions have distinct drawbacks on either human or animal MR systems. On clinical scanners, 3D imaging is suboptimal for localized fMRI applications. It can also display distortions when acceleration methods such as spiral read-outs are used, and, compared to multi-slice acquisitions, suffers from increased sensitivity to motion or physiological noise which further results in blurring. On pre-clinical systems, 3D acquisitions have low temporal resolution due to limited acceleration options, while single slice often results in insufficient coverage. The aim of the present study was to implement a multi-slice bSSFP acquisition with Cartesian read-out to obtain non-distorted BOLD fMRI activation maps in the human and rat brain at ultra-high field. We show that, when using a new pseudo-steady-state, the bSSFP signal characteristics are preserved. In the human brain at 7 T, we demonstrate that both task- and resting-state fMRI can be performed with multi-slice bSSFP, with a temporal SNR that matches that of 3D-bSSFP, resulting in - at least - equal performance. In the rat brain at 14 T, we show that the multi-slice bSSFP protocol has similar sensitivity to gradient-echo EPI for task fMRI, while benefitting from much reduced distortions and drop-outs. The advantages of passband bSSFP at 14 T in comparison with GE-EPI are expected to be even more marked for mouse brain.

3D Cartesian fast interrupted steady-state (FISS) imaging

PURPOSE

To enable intrinsic and efficient fat suppression in 3D Cartesian fast interrupted steady-state (FISS) acquisitions.

METHODS

A periodic interruption of the balanced steady-state free precession (bSSFP) readout train (FISS) has been previously proposed for 2D radial imaging. FISS modulates the bSSFP frequency response pattern in terms of shape, width and location of stop band (attenuated transverse magnetization). Depending on the FISS interruption rate, the stop band characteristic can be exploited to suppress the fat spectrum at 3.5 ppm, thus yielding intrinsic fat suppression. For conventional 2D Cartesian sampling, ghosting/aliasing artifacts along phase-encoding direction have been reported. In this work, we propose to extend FISS to 3D Cartesian imaging and report countermeasures for the previously observed ghosting/aliasing artifacts. Key parameters (dummy prepulses, spatial resolution, and interruption rate) are investigated to optimize fat suppression and image quality. FISS behavior is examined using extended phase graph simulations to recommend parametrizations which are validated in phantom and in vivo measurements on a 1.5T MRI scanner for 3 applications: upper thigh angiography, abdominal imaging, and free-running 5D CINE.

RESULTS

Using optimized parameters, 3D Cartesian FISS provides homogeneous and consistent fat suppression for all 3 applications. In upper thigh angiography, vessel structures can be recovered in FISS that are obscured in bSSFP. Fat suppression in free-running cardiac CINE resulted in less fat-related motion aliasing and yielded better image quality.

CONCLUSION

3D Cartesian FISS is feasible and offers homogeneous intrinsic fat suppression for selected imaging parameters without the need for dedicated preparation pulses, making it a promising candidate for free-running fat-suppressed imaging.

Frequency-modulated SSFP with radial sampling and subspace reconstruction: A time-efficient alternative to phase-cycled bSSFP

PURPOSE

A novel subspace-based reconstruction method for frequency-modulated balanced steady-state free precession (fmSSFP) MRI is presented. In this work, suitable data acquisition schemes, subspace sizes, and efficiencies for banding removal are investigated.

THEORY AND METHODS

By combining a fmSSFP MRI sequence with a 3D stack-of-stars trajectory, scan efficiency is maximized as spectral information is obtained without intermediate preparation phases. A memory-efficient reconstruction routine is implemented by introducing the low-frequency Fourier transform as a subspace which allows for the formulation of a convex reconstruction problem. The removal of banding artifacts is investigated by comparing the proposed acquisition and reconstruction technique to phase-cycled bSSFP MRI. Aliasing properties of different undersampling schemes are analyzed and water/fat separation is demonstrated by reweighting the reconstructed subspace coefficients to generate virtual spectral responses in a post-processing step.

RESULTS

A simple root-of-sum-of-squares combination of the reconstructed subspace coefficients yields high-SNR images with the characteristic bSSFP contrast but without banding artifacts. Compared to Golden-Angle trajectories, turn-based sampling schemes were superior in minimizing aliasing across reconstructed subspace coefficients. Water/fat separated images of the human knee were obtained by reweighting subspace coefficients.

CONCLUSIONS

The novel subspace-based fmSSFP MRI technique emerges as a time-efficient alternative to phase-cycled bSFFP. The method does not need intermediate preparation phases, offers high SNR and avoids banding artifacts. Reweighting of the reconstructed subspace coefficients allows for generating virtual spectral responses with applications to water/fat separation.

Frequency-modulated bSSFP for phase-sensitive separation of water and fat

Our study proposes the use of a frequency-modulated acquisition which suppresses banding artefacts in combination with a phase-sensitive water-fat separation algorithm. The performance of the phase-sensitive separation for standard bSSFP, complex sum combination thereof, and frequency-modulated bSSFP were compared in in vivo measurements of the upper and lower legs at 1.5 and 3 T. It is shown, that the standard acquisition suffered from banding artefacts and major swaps between tissues. The dual-acquisition bSSFP could alleviate banding artefacts and only minor swaps occurred, but it comes at the expense of a doubled acquisition. In the frequency-modulated acquisitions all banding artefacts and the associated phase jumps were eliminated and no swaps between tissues occurred. It therefore provides a means to robustly separate water and fat, in one single radial bSSFP scan, using the phase-sensitive approach, even in the presence of high field inhomogeneities.