Coordination compounds in the entatic state

Electron transfer in biological systems

Examples of how metalloproteins feature in electron transfer processes in biological systems are reviewed. Attention is focused on the electron transport chains of cellular respiration and photosynthesis, and on metalloproteins that directly couple electron transfer to a chemical reaction. Brief mention is also made of extracellular electron transport. While covering highlights of the recent and the current literature, this review is aimed primarily at introducing the senior undergraduate and the novice postgraduate student to this important aspect of bioinorganic chemistry.

Position of substituents directs the electron transfer properties of entatic state complexes: new insights from guanidine-quinoline copper complexes

In a previous study, we showed that the properties and the ability as an entatic state model of copper guanidine quinoline complexes are significantly influenced by a methyl or methyl ester substituent in the 2-position. To prove the importance of the 2-position of the substituent, two novel guanidine quinoline ligands with a methyl or methyl ester substituent in the 4-position and the corresponding copper complexes were synthesized and characterized in this study. The influence of the substituent position on the copper complexes was investigated with various experimental and theoretical methods. The molecular structures of the copper complexes were examined in the solid state by single-crystal X-ray diffraction (SCXRD) and by density functional theory (DFT) calculations indicating a strong dependency on the substituent position compared to the systems substituted in the 2-position from the previous study. Further, the significantly different influence on the donor properties in dependency on the substituent position was analyzed with natural bond orbital (NBO) calculations. By the determination of the redox potentials, the impact on the electrochemical stabilization was examined. With regard to further previously analyzed guanidine quinoline copper complexes, the electrochemical stabilization was correlated with the charge-transfer energies calculated by NBO analysis and ground state energies, revealing the substituent influence and enabling a comparatively easy and accurate possibility for the theoretical calculation of the relative redox potential. Finally, the electron transfer properties were quantified by determining the electron self-exchange rates via the Marcus theory and by theoretical calculation of the reorganization energies via Nelsen's four-point method. The results gave important insights into the dependency between the ability of the copper complexes as entatic state model and the type and position of the substituent.

Redox processes in Cu-binding proteins: the "in-between" states in intrinsically disordered peptides

We report on a concept that some of us first described a decade ago for pure electron transfer [V. Balland, C. Hureau and J.-M. Savéant, Proc. Natl. Acad. Sci. U. S. A., 2010, 107, 17113]. In the present viewpoint, based on more recent results, we refine and extend this "in-between state" concept to explain the formation of reactive oxygen species by copper ions bound to the amyloid-β (Aβ) peptide involved in Alzheimer's disease. In such intrinsically disordered peptides, the Cu coordination is versatile due to the lack of stable folding and the presence of multiple possible binding anchors. Hence, the Cu(I) and Cu(II) ions do impose their favoured sites, with Cu(I) bound in a linear fashion between two His residues and Cu(II) in a square-based pyramid bound to Asp1 amine and carbonyl groups and two His residues in the equatorial plane. Hence a direct electron transfer is prevented and alternatively an in-between state (IBS) mechanism applies, whose description and analysis with respect to other electron transfer processes is the topic of the present viewpoint.

Rapid Electron Transfer Self-Exchange in Conformationally Dynamic Copper Coordination Complexes

We report the electron transfer (ET) self-exchange rate constants (k11) for a pair of CuII/I complexes utilizing dpaR (dpa = dipicolylaniline, R = OMe, SMe) ligands assessed by NMR line broadening experiments. These ligands afford copper complexes that are conformationally dynamic in one oxidation state. With R = OMe, the CuI complex is dynamic, while with R = SMe, the CuII complex is dynamic. Both complexes exhibit unexpectedly large k11 values of 2.48(6) × 105 and 2.21(9) × 106 M-1 s-1 for [CuCl(dpaOMe)]+/0 and [CuCl(dpaSMe)]+/0, respectively. Among the fastest reported molecular copper coordination complexes to date, that of [CuCl(dpaSMe)]+/0 exceeds all others by an order of magnitude and compares only with those observed in type 1 blue copper proteins. The dynamicity of these complexes establishes pre-steady-state conformational equilibria that minimize the inner-sphere reorganization energies to 0.71 and 0.62 eV for R = OMe and SMe, respectively. In contrast to the emphasis on rigidity in the formulation of entatic states applied to blue copper proteins, the success of these two systems highlights the relevance of conformational dynamicity in mediating rapid ET.

Fully Delocalized Mixed-Valent Cu1.5 Cu1.5 Complex: Strong Cu-Cu interaction and Fast Electron Self-Exchange Rate Despite Large Structural Changes

A flexible macrocyclic ligand with two tridentate {CNC} compartments can host two Cu ions in reversibly interconvertible states, Cu^I Cu^I (1) and mixed-valent Cu^1.5 Cu^1.5 (2). They were characterized by XRD and multiple spectroscopic methods, including EPR, UV/Vis absorption and MCD, in combination with TD-DFT and CASSCF calculations. 2 features a short Cu⋅⋅⋅Cu distance (≈2.5 Å; compared to ≈4.0 Å in 1) and a very high delocalization energy of 13 000 cm^-1 , comparable to the mixed-valent state of the biological Cu_A site. Electron self-exchange between 1 and 2 is rapid despite large structural reorganization, and is proposed to proceed via a sequential mechanism involving an active conformer of 1, viz. 1'; the latter has been characterized by XRD. Such electron transfer (ET) process is reminiscent of the conformationally gated ET proposed for biological systems. This redox couple is a unique pair of flexible dicopper complexes, achieving fast electron self-exchange closely related to the function of the Cu_A site.

Geometrical benchmarking and analysis of redox potentials of copper(I/II) guanidine-quinoline complexes: Comparison of semi-empirical tight-binding and DFT methods and the challenge of describing the entatic state (part III)

Copper guanidine-quinoline complexes are an important class of bioinorganic complexes that find utilization in electron and atom transfer processes. By substitution of functional groups on the quinoline moiety the electron transfer abilities of these complexes can be tuned. In order to explore the full substitution space by simulations, the accurate theoretical description of the effect of functional groups is essential. In this study, we compare three different methods for the theoretical description of the structures. We use the semi-empirical tight-binding method GFN2-xTB, the density functional TPSSh and the double-hybrid functional B2PLYP. We evaluate the methods on five different complex pairs (Cu(I) and Cu(II) complexes), and compare how well calculated energies can predict the redox potentials. We find even though B2PLYP and TPSSh yield better accordance with the experimental structures. GFN2-xTB performs surprisingly well in the geometry optimization at a fraction of the computational cost. TPSSh offers a good compromise between computational cost and accuracy of the redox potential for real-life complexes.

A complete biomimetic iron-sulfur cubane redox series

Synthetic iron-sulfur cubanes are models for biological cofactors, which are essential to delineate oxidation states in the more complex enzymatic systems. However, a complete series of [Fe₄S₄]ⁿ complexes spanning all redox states accessible by 1-electron transformations of the individual iron atoms (n = 0-4+) has never been prepared, deterring the methodical comparison of structure and spectroscopic signature. Here, we demonstrate that the use of a bulky arylthiolate ligand promoting the encapsulation of alkali-metal cations in the vicinity of the cubane enables the synthesis of such a series. Characterization by EPR, ⁵⁷Fe Mössbauer spectroscopy, UV-visible electronic absorption, variable-temperature X-ray diffraction analysis, and cyclic voltammetry reveals key trends for the geometry of the Fe₄S₄ core as well as for the Mössbauer isomer shift, which both correlate systematically with oxidation state. Furthermore, we confirm the S = 4 electronic ground state of the most reduced member of the series, [Fe₄S₄]⁰, and provide electrochemical evidence that it is accessible within 0.82 V from the [Fe₄S₄]²⁺ state, highlighting its relevance as a mimic of the nitrogenase iron protein cluster.

Manipulating electron transfer - the influence of substituents on novel copper guanidine quinolinyl complexes

Copper guanidine quinolinyl complexes act as good entatic state models due to their distorted structures leading to a high similarity between Cu(i) and Cu(ii) complexes. For a better understanding of the entatic state principle regarding electron transfer a series of guanidine quinolinyl ligands with different substituents in the 2- and 4-position were synthesized to examine the influence on the electron transfer properties of the corresponding copper complexes. Substituents with different steric or electronic influences were chosen. The effects on the properties of the copper complexes were studied applying different experimental and theoretical methods. The molecular structures of the bis(chelate) copper complexes were examined in the solid state by single-crystal X-ray diffraction and in solution by X-ray absorption spectroscopy and density functional theory (DFT) calculations revealing a significant impact of the substituents on the complex structures. For a better insight natural bond orbital (NBO) calculations of the ligands and copper complexes were performed. The electron transfer was analysed by the determination of the electron self-exchange rates following Marcus theory. The obtained results were correlated with the results of the structural analysis of the complexes and of the NBO calculations. Nelsen's four-point method calculations give a deeper understanding of the thermodynamic properties of the electron transfer. These studies reveal a significant impact of the substituents on the properties of the copper complexes.

Toward Improved Charge Separation through Conformational Control in Copper Coordination Complexes

The continued development of solar energy as a renewable resource necessitates new approaches to sustaining photodriven charge separation (CS). We present a bioinspired approach in which photoinduced conformational rearrangements at a ligand are translated into changes in coordination geometry and environment about a bound metal ion. Taking advantage of the differential coordination properties of Cu^I and Cu^II, these dynamics aim to facilitate intramolecular electron transfer (ET) from Cu^I to the ligand to create a CS state. The synthesis and photophysical characterization of CuCl(dpaa^R) (dpaa = dipicolylaminoacetophenone, with R = H and OMe) are presented. These ligands incorporate a fluorophore that gives rise to a twisted intramolecular charge transfer (TICT) excited state. Excited-state ligand twisting provides a tetragonal coordination geometry capable of capturing Cu^II when an internal ortho-OMe binding site is present. NMR, IR, electron paramagnetic resonance (EPR), and optical spectroscopies, X-ray diffraction, and electrochemical methods establish the ground-state properties of these Cu^I and Cu^II complexes. The photophysical dynamics of the Cu^I complexes are explored by time-resolved photoluminescence and optical transient absorption spectroscopies. Relative to control complexes lacking a TICT-active ligand, the lifetimes of CS states are enhanced ∼1000-fold. Further, the presence of the ortho-OMe substituent greatly enhances the lifetime of the TICT* state and biases the coordination environment toward Cu^II. The presence of Cu^I decreases photoinduced degradation from 14 to <2% but does not result in significant quenching via ET. Factors affecting CS in these systems are discussed, laying the groundwork for our strategy toward solar energy conversion.

An Iron-Mesoionic Carbene Complex for Catalytic Intramolecular C-H Amination Utilizing Organic Azides

The synthesis of N-heterocycles is of paramount importance for the pharmaceutical industry. They are often synthesized through atom economic and environmentally unfriendly methods, generating significant waste. A less explored, but greener, alternative is the synthesis through the direct intramolecular C-H amination utilizing organic azides. Few examples exist by using this method, but many are limited due to the required use of stoichiometric amounts of Boc₂O. Herein, we report a homoleptic C,O-chelating mesoionic carbene-iron complex, which is the first iron-based complex that does not require the addition of any protecting groups for this transformation and that is active also in strong donor solvents such as THF or even DMSO. The achieved turnover number is an order of magnitude higher than any other reported catalytic system. A variety of C-H bonds were activated, including benzylic, primary, secondary, and tertiary. By following the reaction over time, we determined the presence of an initiation period. Kinetic studies showed a first-order dependence on substrate concentration and half-order dependence on catalyst concentration. Intermolecular competition reactions with deuterated substrate showed no KIE, while separate reactions with deuterium-labeled substrate resulted in a KIE of 2.0. Moreover, utilizing deuterated substrate significantly decreased the initiation period of the catalysis. Preliminary mechanistic studies suggest a unique mechanism involving a dimeric iron species as the catalyst resting state.

Symmetry Breaking in Solution-Phase [Cu(tsc)2(H2O)2]2+: Emergent Asymmetry in Cu-S Distances and in Covalence

The structure of aqueous Cu(II)-bis-thiosemicarbazide, [Cu(tsc)₂]²⁺, is reported following EXAFS and MXAN analyses of the copper K-edge X-ray absorption (XAS) spectrum. The rising K-edge feature at 8987.1 eV is higher energy than those of crystalline models, implying unique electronic and structural solution states. EXAFS analysis (k = 2-13 Å^-1; 2 × Cu-N = 2.02 ± 0.01 Å; 2 × Cu-S = 2.27 ± 0.01 Å; Cu-O_ax = 2.41 ± 0.04 Å) could not resolve 5- versus 6-coordinate models. However, MXAN fits converged to an asymmetric broken symmetry 6-coordinate model with cis-disposed TSC ligands (Cu-O_ax = 2.07 and 2.54 Å; Cu-N = 1.94 Å, 1.98 Å; Cu-S = 2.20 Å, 2.41 Å). Transition dipole integral evaluation of the sulfur K-edge XAS 1s → 3p valence transition feature at 2470.7 eV yielded a Cu-S covalence of 0.66 e^-, indicating Cu^1.34+. The high Cu-S covalence and short Cu-S bond in aqueous [Cu(tsc)₂(H₂O)₂]²⁺ again contradict the need for a protein rack to explain the unique structure of the blue copper active site. MXAN models of dissolved Cu(II) complex ions have invariably featured broken centrosymmetry. The potential energy ground state for dissolved Cu(II) evidently includes the extended solvation field, providing a target for improved physical theory. A revised solvation model for aqueous Cu(II), |[Cu(H₂O)₅]·14H₂O|²⁺, is presented.

Water-mediated reduction of [Cu(dmp)2(CH3CN)]2+: implications of the structure of a classical complex on its activity as an anticancer drug

[Cu(dmp)₂(CH₃CN)]²⁺ can be reduced in acetonitrile containing water due to steric constraints of the ligands. Hydroxyl radicals are produced from water oxidation. We take advantage of this reaction to evaluate the anticancer activity of the complex.

Biological concepts for catalysis and reactivity: empowering bioinspiration

Biological systems provide attractive reactivity blueprints for the design of challenging chemical transformations. Emulating the operating mode of natural systems may however not be so easy and direct translation of structural observations does not always afford the anticipated efficiency. Metalloenzymes rely on earth-abundant metals to perform an incredibly wide range of chemical transformations. To do so, enzymes in general have evolved tools and tricks to enable control of such reactivity. The underlying concepts related to these tools are usually well-known to enzymologists and bio(inorganic) chemists but may be a little less familiar to organometallic chemists. So far, the field of bioinspired catalysis has greatly focused on the coordination sphere and electronic effects for the design of functional enzyme models but might benefit from a paradigm shift related to recent findings in biological systems. The goal of this review is to bring these fields closer together as this could likely result in the development of a new generation of highly efficient bioinspired systems. This contribution covers the fields of redox-active ligands, entatic state reactivity, energy conservation through electron bifurcation, and quantum tunneling for C-H activation.

Reactivity of CuIN4 Flattened Complexes: Interplay between Coordination Geometry and Ligand Flexibility

The relation between redox activity and coordination geometry in Cu^IN₄ complexes indicates that more flattened structures tend to be more reactive. Such a preorganization of the ligand confers to the complex geometries closer to a transition state, which has been termed the "entatic" state in metalloproteins, more recently extending this concept for copper complexes. However, many aspects of the redox chemistry of Cu^I complexes cannot be explained only by flattening. For instance, the role of ligand flexibility in this context is an open debate nowadays. To analyze this point, we studied oxidation properties of a series of five monometallic Cu^I Schiff-base complexes, [Cu^I(L_n)]⁺, which span a range of geometries from a distorted square planar (n = 3) to a distorted tetrahedron (n = 6, 7). This stepped control of the structure around the Cu^I atom allows us to explore the effect of the flattening distortion on both the electronic and redox properties through the series. Experimental studies were complemented by a theoretical analysis based on density functional theory calculations. As expected, oxidation was favored in the flattened structures, spanning a broad potential window of 370 mV for the complete series. This orderly behavior was tested in the reductive dehalogenation reaction of tetrachloroethane (TCE). Kinetic studies show that Cu^I oxidation by TCE is faster as the flattening distortion is higher and the oxidation potentials of the metal are lower. However, the most reactive complex was not the more planar, contradicting the trend expected from oxidation potentials. The origin of this irregularity is related to ligand flexibility and its connection with the atom/electron transfer reaction path, highlighting the need to consider effects beyond flattening distortion to better understand the reactivity of this important class of complexes.

Catalytic properties of the metal ion variants of mandelate racemase reveal alterations in the apparent electrophilicity of the metal cofactor

Mandalate racemase (MR) from Pseudomonas putida requires a divalent metal cation, usually Mg2+, to catalyse the interconversion of the enantiomers of mandelate. Although the active site Mg2+ may be replaced by Mn2+, Co2+, or Ni2+, substitution by these metal ions does not markedly (<10-fold) alter the kinetic parameters Kappm, kappcat, and (kcat/Km)app for the substrates (R)- and (S)-mandelate, and the alternative substrate (S)-trifluorolactate. Viscosity variation experiments with Mn2+-MR showed that the metal ion plays a role in the uniform binding of the transition states for enzyme-substrate association, the chemical step, and enzyme-product dissociation. Surprisingly, the competitive inhibition constants (Ki) for inhibition of each metalloenzyme variant by benzohydroxamate did not vary significantly with the identity of the metal ion unlike the marked variation of the stability constants (K1) observed for M2+·BzH complex formation in solution. A similar trend was observed for the inhibition of the metalloenzyme variants by F-, except for Mg2+-MR, which bound F- tighter than would be predicted based on the stability constants for formation of M2+·F- complexes in solution. Thus, the enzyme modifies the enatic state of the bound metal ion cofactor so that the apparent electrophilicity of Mg2+ is enhanced, while that of Ni2+ is attenuated, resulting in a levelling effect relative to the trends observed for the free metals in solution.

Optimizing Group Transfer Catalysis by Copper Complex with Redox-Active Ligand in an Entatic State

Metalloenzymes use earth-abundant non-noble metals to perform high-fidelity transformations in the biological world. To ensure chemical efficiency, metalloenzymes have acquired evolutionary reactivity-enhancing tools. Among these, the entatic state model states that a strongly distorted geometry induced by ligands around a metal center gives rise to an energized structure called entatic state, strongly improving the reactivity. However, the original definition refers both to the transfer of electrons or chemical groups, whereas the chemical application of this concept in synthetic systems has mostly focused on electron transfer, therefore eluding chemical transformations. Here we report that a highly strained redox-active ligand enables a copper complex to perform catalytic nitrogen- and carbon-group transfer in as fast as 2 min, thus exhibiting a strong increase in reactivity compared with its unstrained analogue. This report combines two reactivity-enhancing features from metalloenzymes, entasis and redox cofactors, applied to group-transfer catalysis.

•

We design a catalyst interfacing two reactivity-enhancing tools from metalloenzymes

•

This work merges redox-active cofactors and entatic state reactivity

•

The modifications in the coordination sphere lead to enhanced catalytic behavior

•

These results open perspectives in bioinspired catalysis and group-transfer reactions

Copper(I) Phosphinooxazoline Complexes: Impact of the Ligand Substitution and Steric Demand on the Electrochemical and Photophysical Properties

A series of seven homoleptic Cu^I complexes based on hetero-bidentate P^N ligands was synthesized and comprehensively characterized. In order to study structure-property relationships, the type, size, number and configuration of substituents at the phosphinooxazoline (phox) ligands were systematically varied. To this end, a combination of X-ray diffraction, NMR spectroscopy, steady-state absorption and emission spectroscopy, time-resolved emission spectroscopy, quenching experiments and cyclic voltammetry was used to assess the photophysical and electrochemical properties. Furthermore, time-dependent density functional theory calculations were applied to also analyze the excited state structures and characteristics. Surprisingly, a strong dependency on the chirality of the respective P^N ligand was found, whereas the specific kind and size of the different substituents has only a minor impact on the properties in solution. Most importantly, all complexes except C3 are photostable in solution and show fully reversible redox processes. Sacrificial reductants were applied to demonstrate a successful electron transfer upon light irradiation. These properties render this class of photosensitizers as potential candidates for solar energy conversion issues.

Rotaxane PtII-complexes: mechanical bonding for chemically robust luminophores and stimuli responsive behaviour

We report an approach to rotaxanes in which the metal ion of a cyclometallated Pt^II luminophore is embedded in the space created by the mechanical bond. Our results show that the interlocked ligand environment stabilises a normally labile Pt^II–triazole bond against displacement by competing ligands and that the crowded environment of the mechanical bond retards oxidation of the Pt^II centre, without perturbing the photophysical properties of the complex. When an additional pyridyl binding site is included in the axle, the luminescence of the Pt^II centre is quenched, an effect that can be selectively reversed by the binding of Ag^I. Our results suggest that readily available interlocked metal-based phosphors can be designed to be stimuli responsive and have advantages as stabilised triplet harvesting dopants for device applications.

We report an approach to interlocked Pt^II luminophores in which the mechanical bond stabilises the coordination environment of the embedded metal ion.

Theoretical study of aromatic hydroxylation of the [Cu2(H-XYL)O2]2+ complex mediated by a side-on peroxo dicopper core and Cu-ligand effects

In this work, the aromatic hydroxylation mechanism of the [Cu₂(H-XYL)O₂]²⁺ complex mediated by a peroxo dicopper core and Cu-ligand effects are investigated by using hybrid density functional theory (DFT) and the broken symmetry B3LYP method. Based on the calculated free-energy profiles, we proposed two available mechanisms. The first reaction steps of both mechanisms involve concerted O-O bond cleavage and C-O bond formation and the second step involves the Wagner-Meerwein rearrangement of the substrate by a [1,2] H shift (H_A shift from C_A to C_C) or (H_A shift from C_A to O_A) across the phenyl ring to form stable dienone intermediates, and this is followed by the protonation of bridging oxygen atoms to produce the final hydroxylated dicopper(ii) product. The H_A shift from C_A to C_C mechanism is the energetically most favorable, in which the first reaction step is the rate-limiting reaction, with a calculated free-energy barrier of 19.0 kcal mol^-1 and a deuterium kinetic isotope effect of 1.0, in agreement with experimental observations. The calculation also shows that the reaction started from the P-type species of [Cu₂(H-XYL)O₂]²⁺ which is capable of mediating the direct hydroxylation of aromatic substrates without the intermediacy of an O-type species. Finally, we designed some new complexes with different Cu-ligands and found the complex that computationally possesses a higher activity in mediating the hydroxylation of the ligand based aromatic substrate; here, Cu loses a pyridyl ligand donor by dissociation, compared to the [Cu₂(H-XYL)O₂]²⁺ complex.

Low Reorganization Energy for Electron Self-Exchange by a Formally Copper(III,II) Redox Couple

The rate constant for electron self-exchange (k₁₁) between LCuOH and [LCuOH]^- (L = bis-2,6-(2,6-diisopropylphenyl)carboximidopyridine) was determined using the Marcus cross relation. This work involved measurement of the rate of the cross-reaction between [Bu₄N][LCuOH] and [Fc][BAr₄^F] (Fc⁺ = ferrocenium; BAr₄^F = tetrakis[3,5-bis(trifluoromethyl)phenyl]borate)) by stopped-flow methods at -88 °C in CH₂Cl₂ and measurement of the equilibrium constant for the redox process by UV-vis titrations under the same conditions. A value of k₁₁ = 3 × 10⁴ M^-1 s^-1 (-88 °C) led to estimation of a value 9 × 10⁶ M^-1 s^-1 at 25 °C, which is among the highest values known for copper redox couples. Further Marcus analysis enabled determination of a low reorganization energy, λ = 0.95 ± 0.17 eV, attributed to minimal structural variation between the redox partners. In addition, the reaction entropy (ΔS°) associated with the LCuOH/[LCuOH]^- self-exchange was determined from the temperature dependence of the redox potentials, and found to be dependent upon ionic strength. Comparisons to other Cu redox systems and potential new applications for the formally Cu^III,II system are discussed.

Hypothesis: entaticversusecstatic states in metalloproteins

Biological metal sites are optimized for function by conformational properties of the protein macroligand.

Engineering a bifunctional copper site in the cupredoxin fold by loop-directed mutagenesis

Copper sites in proteins are designed to perform either electron transfer or redox catalysis. Type 1 and CuA sites are electron transfer hubs bound to a rigid protein fold that prevents binding of exogenous ligands and side reactions. Here we report the engineering of two Type 1 sites by loop-directed mutagenesis within a CuA scaffold with unique electronic structures and functional features. A copper-thioether axial bond shorter than the copper-thiolate bond is responsible for the electronic structure features, in contrast to all other natural or chimeric sites where the copper thiolate bond is short. These sites display highly unusual features, such as: (1) a high reduction potential despite a strong interaction with the axial ligand, which we attribute to changes in the hydrogen bond network and (2) the ability to bind exogenous ligands such as imidazole and azide. This strategy widens the possibility of using natural protein scaffolds with functional features not present in nature.

Synthesis, structure, and excited state kinetics of heteroleptic Cu(i) complexes with a new sterically demanding phenanthroline ligand

In this report we describe the synthesis of a new phenanthroline ligand, 2,9-di(2,4,6-tri-isopropyl-phenyl)-1,10-phenanthroline (bL2) and its use as the blocking ligand in the preparation of two new heteroleptic Cu(i)diimine complexes. Analysis of the CuHETPHEN single crystal structures shows a distinct distortion from an ideal tetrahedral geometry around the Cu(i) center, forced by the secondary phenanthroline ligand rotating to accommodate the isopropyl groups of bL2. The increased steric bulk of bL2 as compared to the more commonly used 2,9-dimesityl-1,10-phenanthroline blocking ligand prohibits intramolecular ligand-ligand interaction, which is unique among CuHETPHEN complexes. The ground state optical and redox properties of CuHETPHEN complexes are responsive to the substitution on the blocking ligand even though the differences in structure are far removed from the Cu(i) center. Transient optical spectroscopy was used to understand the excited state kinetics in both coordinating and non-coordinating solvents following visible excitation. Substitution of the blocking phenanthroline ligand has a significant impact on the ³MLCT decay and can be used to increase the excited state lifetime by 50%. Electronic structure calculations established relationships between ground and excited state properties, and general entatic state concepts are discussed for copper photosensitizers. This work contributes to the growing library of CuHETPHEN complexes and broadens the fundamental understanding of their ground and excited state properties.

Inter- and Intramolecular Electron Transfer in Copper Complexes: Electronic Entatic State with Redox-Active Guanidine Ligands

Fast and efficient electron transfer in blue copper proteins is realized by a structural harmonization between the Cu^I and Cu^II complex pair ("entatic state" model). Herein, we present now a Cu^I /Cu^II complex pair with redox-active guanidine ligands showing almost perfect match between both redox states. By modifying the ligand electron donor strength, the redox chemistry of the copper complex can be controlled to be either metal-centered or to cross the borderline to ligand-centered. This work is the first systematic study of complexes with redox-active ligands within the concept of the entatic state.

A Bispidine Iron(IV)-Oxo Complex in the Entatic State

For a series of Fe(IV) =O complexes with tetra- and pentadentate bispidine ligands, the correlation of their redox potentials with reactivity, involving a variety of substrates for alkane hydroxylation (HAT), alkene epoxidation, and phosphine and thioether oxidation (OAT) are reported. The redox potentials span approximately 350 mV and the reaction rates over 8 orders of magnitude. From the experimental data and in comparison with published studies it emerges that electron transfer and the driving force are of major importance, and this is also supported by the DFT-based computational analysis. The striking difference of reactivity of two isomeric systems with pentadentate bispidines is found to be due to a destabilization of the S=1 ground state of one of the ferryl isomers, and this is supported by the experimentally determined redox potentials and published stability constants with a series of first-row transition metal ions with these two isomeric ligands.

Hydrogen Bonds Dictate the Coordination Geometry of Copper: Characterization of a Square-Planar Copper(I) Complex

6,6''-Bis(2,4,6-trimethylanilido)terpyridine (H2Tpy(NMes)) was prepared as a rigid, tridentate pincer ligand containing pendent anilines as hydrogen bond donor groups in the secondary coordination sphere. The coordination geometry of (H2 Tpy(NMes))copper(I)-halide (Cl, Br and I) complexes is dictated by the strength of the NH-halide hydrogen bond. The Cu(I)Cl and Cu(II)Cl complexes are nearly isostructural, the former presenting a highly unusual square-planar geometry about Cu(I) . The geometric constraints provided by secondary interactions are reminiscent of blue copper proteins where a constrained geometry, or entatic state, allows for extremely rapid Cu(I)/Cu(II) electron-transfer self-exchange rates. Cu(H2 Tpy(NMes))Cl shows similar fast electron transfer (≈10(5)  m(-1)  s(-1)) which is the same order of magnitude as biological systems.

Controlled ligand distortion and its consequences for structure, symmetry, conformation and spin-state preferences of iron(II) complexes

The ligand-field strength in metal complexes of polydentate ligands depends critically on how the ligand backbone places the donor atoms in three-dimensional space. Distortions from regular coordination geometries are often observed. In this work, we study the isolated effect of ligand-sphere distortion by means of two structurally related pentadentate ligands of identical donor set, in the solid state (X-ray diffraction, (57)Fe-Mössbauer spectroscopy), in solution (NMR spectroscopy, UV/Vis spectroscopy, conductometry), and with quantum-chemical methods. Crystal structures of hexacoordinate iron(II) and nickel(II) complexes derived from the cyclic ligand L(1) (6-methyl-6-(pyridin-2-yl)-1,4-bis(pyridin-2-ylmethyl)-1,4-diazepane) and its open-chain congener L(2) (N(1),N(3),2-trimethyl-2-(pyridine-2-yl)-N(1),N(3)-bis(pyridine-2-ylmethyl) propane-1,3-diamine) reveal distinctly different donor set distortions reflecting the differences in ligand topology. Distortion from regular octahedral geometry is minor for complexes of ligand L(2), but becomes significant in the complexes of the cyclic ligand L(1), where trans elongation of Fe-N bonds cannot be compensated by the rigid ligand backbone. This provokes trigonal twisting of the ligand field. This distortion causes the metal ion in complexes of L(1) to experience a significantly weaker ligand field than in the complexes of L(2), which are more regular. The reduced ligand-field strength in complexes of L(1) translates into a marked preference for the electronic high-spin state, the emergence of conformational isomers, and massively enhanced lability with respect to ligand exchange and oxidation of the central ion. Accordingly, oxoiron(IV) species derived from L(1) and L(2) differ in their spectroscopic properties and their chemical reactivity.

Nitrate and periplasmic nitrate reductases

The nitrate anion is a simple, abundant and relatively stable species, yet plays a significant role in global cycling of nitrogen, global climate change, and human health. Although it has been known for quite some time that nitrate is an important species environmentally, recent studies have identified potential medical applications. In this respect the nitrate anion remains an enigmatic species that promises to offer exciting science in years to come. Many bacteria readily reduce nitrate to nitrite via nitrate reductases. Classified into three distinct types--periplasmic nitrate reductase (Nap), respiratory nitrate reductase (Nar) and assimilatory nitrate reductase (Nas), they are defined by their cellular location, operon organization and active site structure. Of these, Nap proteins are the focus of this review. Despite similarities in the catalytic and spectroscopic properties Nap from different Proteobacteria are phylogenetically distinct. This review has two major sections: in the first section, nitrate in the nitrogen cycle and human health, taxonomy of nitrate reductases, assimilatory and dissimilatory nitrate reduction, cellular locations of nitrate reductases, structural and redox chemistry are discussed. The second section focuses on the features of periplasmic nitrate reductase where the catalytic subunit of the Nap and its kinetic properties, auxiliary Nap proteins, operon structure and phylogenetic relationships are discussed.

L-edge X-ray absorption spectroscopy and DFT calculations on Cu2O2 species: direct electrophilic aromatic attack by side-on peroxo bridged dicopper(II) complexes

The hydroxylation of aromatic substrates catalyzed by coupled binuclear copper enzymes has been observed with side-on-peroxo-dicopper(II) (P) and bis-μ-oxo-dicopper(III) (O) model complexes. The substrate-bound-O intermediate in [Cu(II)2(DBED)2(O)2](2+) (DBED = N,N'-di-tert-butyl-ethylenediamine) was shown to perform aromatic hydroxylation. For the [Cu(II)2(NO2-XYL)(O2)](2+) complex, only a P species was spectroscopically observed. However, it was not clear whether this O-O bond cleaves to proceed through an O-type structure along the reaction coordinate for hydroxylation of the aromatic xylyl linker. Accurate evaluation of these reaction coordinates requires reasonable quantitative descriptions of the electronic structures of the P and O species. We have performed Cu L-edge XAS on two well-characterized P and O species to experimentally quantify the Cu 3d character in their ground state wave functions. The lower per-hole Cu character (40 ± 6%) corresponding to higher covalency in the O species compared to the P species (52 ± 4%) reflects a stronger bonding interaction of the bis-μ-oxo core with the Cu(III) centers. DFT calculations show that 10-20% Hartree-Fock (HF) mixing for P and ~38% for O species are required to reproduce the Cu-O bonding; for the P species this HF mixing is also required for an antiferromagnetically coupled description of the two Cu(II) centers. B3LYP (with 20% HF) was, therefore, used to calculate the hydroxylation reaction coordinate of P in [Cu(II)2(NO2-XYL)(O2)](2+). These experimentally calibrated calculations indicate that the electrophilic attack on the aromatic ring does not involve formation of a Cu(III)2(O(2-))2 species. Rather, there is direct electron donation from the aromatic ring into the peroxo σ* orbital of the Cu(II)2(O2(2-)) species, leading to concerted C-O bond formation with O-O bond cleavage. Thus, species P is capable of direct hydroxylation of aromatic substrates without the intermediacy of an O-type species.