Determination of estrogens in river water by gas chromatography-negative-ion chemical-ionization mass spectrometry

Reproductive drugs and environmental contamination: quantum, impact assessment and control strategies

Industrial and municipal solid wastes, noise, pesticides, fertilizers and vehicular emission are visible pollutants responsible for environmental contamination and ill-effects on health of all living systems. But, environmental contamination due to drugs or medicines used for different purposes in humans and animals goes unseen largely and can affect the health of living system severely. During the last few decades, the usage of drugs has increased drastically, resulting in increased drug load in soil and water. Contraceptive and fertility drugs are extensively and effectively used in humans as well as animals for different purposes. Usage of these reproductive drugs in humans is increased manifold to manage reproductive problems and/or for birth control with changing lifestyles. These drugs are excreted in urine and faeces as metabolite or conjugated forms, leading to contamination of water, milk and animal produce, which are consumed directly by humans as well as animals. These drugs are not eliminated even by water treatment plant. Consumption of such contaminated water, milk, meat and poultry products results in reproductive disorders such as fertility loss in men and increase risk of different types of cancers in humans. Therefore, assessment of impact of environmental contamination by these drugs on living system is of paramount importance. The purpose of this review article is to provide a comprehensive analysis of various research and review reports on different contraceptive and fertility drugs used in human and animals, their occurrence in the environment and their ill-effects on living systems. The approaches to control this invisible menace have also been proposed.

Estrogens determination in wastewater samples by automatic in-syringe dispersive liquid-liquid microextraction prior silylation and gas chromatography

A new procedure for the extraction, preconcentration and simultaneous determination of the estrogens most used in contraception pharmaceuticals (estrone, 17β-estradiol, estriol, and 17α-ethynylestradiol), cataloged as Contaminants of Emergent Concern by the Environmental Protection Agency of the United States (US-EPA), is proposed. The developed system performs an in-syringe magnetic stirring-assisted dispersive liquid-liquid microextraction (in-syringe-MSA-DLLME) prior derivatization and gas chromatography (GC-MS). Different extraction (carbon tetrachloride, ethyl acetate, chloroform and trichloroethylene) and disperser solvents (acetone, acetonitrile and methanol) were tested. Chloroform and acetone were chosen as extraction and disperser solvent, respectively, as they provided the best extraction efficiency. Then, a multivariate optimization of the extraction conditions was carried out. Derivatization conditions were also studied to ensure the conversion of the estrogens to their respective trimethylsilyl derivatives. Low LODs and LOQs were achieved, i.e. between 11 and 82ngL(-1), and 37 and 272ngL(-1), respectively. Good values for intra and inter-day precision were obtained (RSDs≤7.06% and RSD≤7.11%, respectively). The method was successfully applied to wastewater samples.

Quantification of Polyfunctional Thiols in Wine by HS-SPME-GC-MS Following Extractive Alkylation

Analyses of key odorous polyfunctional volatile thiols in wines (3-mercaptohexanol (3-MH), 3-mercaptohexylacetate (3-MHA), and 4-mercapto-4-methyl-2-pentanone (4-MMP)) are challenging due to their high reactivity and ultra-trace concentrations, especially when using conventional gas-chromatography electron impact mass spectrometry (GC-EI-MS). We describe a method in which thiols are converted to pentafluorobenzyl (PFB) derivatives by extractive alkylation and the organic layer is evaporated prior to headspace solid phase microextraction (HS-SPME) and GC-EI-MS analysis. Optimal parameters were determined by response surface area modeling. The addition of NaCl solution to the dried SPME vials prior to extraction resulted in up to less than fivefold improvement in detection limits. Using 40 mL wine samples, limits of detection for 4-MMP, 3-MH, and 3-MHA were 0.9 ng/L, 1 ng/L, and 17 ng/L, respectively. Good recovery (90%–109%) and precision (5%–11% RSD) were achieved in wine matrices. The new method was used to survey polyfunctional thiol concentrations in 61 commercial California and New York State wines produced from V. vinifera (Riesling, Gewürztraminer, Cabernet Sauvignon, Sauvignon blanc and non-varietal rosé wines), V. labruscana (Niagara), and Vitis spp. (Cayuga White). Mean 4-MMP concentrations in New York Niagara (17 ng/L) were not significantly different from concentrations in Sauvignon blanc, but were significantly higher than 4-MMP in other varietal wines.

Microbial community assembly, theory and rare functions

Views of community assembly have traditionally been based on the contrasting perspectives of the deterministic niche paradigm and stochastic neutral models. This study sought to determine if we could use empirical interventions conceived from a niche and neutral perspective to change the diversity and evenness of the microbial community within a reactor treating wastewater and to see if there was any associated change in the removal of endocrine disrupting compounds (EDCs). The systematic removal of EDCs and micropollutants from biological treatment systems is a major challenge for environmental engineers. We manipulated pairs of bioreactors in an experiment in which “niche” (temporal variation in resource concentration and resource complexity) and “neutral” (community size and immigration) attributes were changed and the effect on the detectable diversity and the removal of steroidal estrogens was evaluated. The effects of manipulations on diversity suggested that both niche and neutral processes are important in community assembly. We found that temporal variation in environmental conditions increased diversity but resource complexity did not. Larger communities had greater diversity but attempting to increase immigration by adding soil had the opposite effect. The effects of the manipulations on EDC removal efficiency were complex. Decreases in diversity, which were associated with a decrease in evenness, were associated with an increase in EDC removal. A simple generalized neutral model (calibrated with parameters typical of wastewater treatment plants) showed that decreases in diversity should lead to the increase in abundance of some ostensibly taxa rare. We conclude that neither niche and neutral perspectives nor the effect of diversity on putative rare functions can be properly understood by naïve qualitative observations. Instead, the relative importance of the key microbial mechanisms must be determined and, ideally, expressed mathematically.

Estrogens in streams associated with a concentrated animal feeding operation in upstate New York, USA

Estrogens (estrone, 17 alpha-estradiol, 17beta-estradiol, and estriol) in three headwater streams within a concentrated animal feed operation (CAFO) site were monitored on a monthly base for a year (November 2006-October 2007). This CAFO is certified as organic (no growth promoters are administrated) and uses many Whole Farm Planning practices (e.g., 12-month-capacity waste storage lagoons). In general, estrogen concentrations in the streams are low (<1 ng L(-1)), and appeared to increase in spring, likely due to the mobilization of estrogens from soils upon snow melting/precipitation. Estrogens were detected in the streams during dry periods, indicating the contribution of estrogens from groundwater. The low concentrations of estrogens in stream water were probably the result of the long residence time (approximately 8 months) of the manure in the lagoons where most of the estrogens were degraded during storage. An analysis of liquid manure at the beginning of manure application season (after approximately 8 months storage) showed that over 99.8% of the estrogens potentially excreted by the cows were degraded. Moreover, about 90% of the estrogens in the liquid manure were associated with particulates larger than 0.7 microm. Batch experiments with spiked deuterium-labeled 17beta-estradiol-16,16,17-d(3) (d(3)-E2 beta) in the liquid manure demonstrated sorption of d(3)-E2 beta onto particulates in the liquid manure, and rapid degradation of d(3)-E2 beta in the aqueous phase and on particulates of the liquid manure under aerobic conditions.

Study on the migration of bisphenol-A from baby bottles by stir bar sorptive extraction-thermal desorption-capillary GC-MS

Migration of bisphenol-A (BPA), the principal monomer of polycarbonate (PC) baby bottles, was investigated using an aqueous migration simulant. BPA was determined in 200 mL water samples using stir bar sorptive extraction (SBSE) after in situ derivatization with acetic acid anhydride followed by thermal desorption (TD)-capillary GC-MS. The concentration of BPA was calculated using the deuterated internal standard d6-BPA. Calibration for BPA was shown to be linear in a concentration range from 1 ng/L to 10 microg/L with a correlation coefficient >0.99. The LOD for BPA (as acetate) was 0.12 ng/L and LOQ 0.40 ng/L (ppt). PC bottles were heated in a water bath and in a microwave oven at four different temperatures (37, 53, 65, and 85 degrees C). The higher the temperature, the more the BPA was released, and after a few heating cycles, the released concentrations became constant. At normal use, i.e. at 37 degrees C, concentrations are ca. 10 ng/L. No significant difference was noted between water bath and microwave heating illustrating that migration of BPA is mainly temperature dependent.

Analysis for estrogens as environmental pollutants--a review

The approaches to the analysis for estrogen compounds as environmental pollutants are critically reviewed and evaluated on the basis of significant, recent original publications. The importance of sample pretreatment and analyte preconcentration techniques is pointed out, with an emphasis on SPE and on the use of highly selective interactions such as molecular recognition. The hyphenated systems of high-performance gas or liquid chromatography and mass spectrometric techniques are discussed as the basic methods of determination of estrogens in environmental samples. Immunochemical procedures are shown to be useful in semiquantitative screening of estrogen pollutants (e.g. ELISA kits). Classical HPLC and GC with common UV/Vis, fluorescence and electrochemical detection are useful in routine checking on higher pollutant concentrations.

Determination of phenolic endocrine disrupting chemicals and acidic pharmaceuticals in surface water of the Pearl Rivers in South China by gas chromatography-negative chemical ionization-mass spectrometry

An analytical method for phenolic endocrine disrupting chemicals and acidic pharmaceuticals in river water was developed using gas chromatography mass spectrometry (GC-MS) coupled with negative chemical ionization (NCI) technique, and used for the determination of these compounds in the Pearl Rivers (Liuxi, Zhujiang and Shijing Rivers). Derivatization using pentafluorobenzoyl chloride (PFBOCl) and pentafluorobenzyl bromide (PFBBr) before GC-MS analysis were applied and optimized for phenolic compounds and acidic compounds, respectively. The target compounds were analyzed for river waters from the upstream to downstream of the Pearl Rivers. Phenolic compounds 4-tert-octylphenol (4-t-OP), 4-nonylphenol (4-NP), bisphenol-A (BPA), estrone (E1), estradiol (E2) and triclosan (TCS) were detected at trace or low levels in the water samples from Liuxi River and Zhujiang River. Diethylstilbestrol (DES) was not detected in the Pearl Rivers. The highest concentrations of the phenolic compounds were found in Shijing River, and they were 3150 ng/L for 4-t-OP, 11,300 ng/L for 4-NP, 1040 ng/L for BPA, 79 ng/L for E1, 7.7 ng/L for E2 and 355 ng/L for TCS, respectively. Only a few acidic pharmaceuticals were detected at low concentrations in water from Liuxi River and Zhujiang River, but the highest concentrations for the acidic pharmaceuticals were also found in Shijing River. The highest concentrations detected for clofibric acid, ibuprofen, gemfibrozil, naproxen, mefenamic acid and diclofenac were 17 ng/L, 685 ng/L, 19.8 ng/L, 125 ng/L, 24.6 ng/l and 150 ng/L, respectively. The results suggest Liuxi and Zhujiang Rivers are only slightly contaminated and can be used as drinking water sources, but Shijing River is heavily polluted by the wastewater from nearby towns.

Fate of estrogens during the biological treatment of synthetic wastewater in a nitrite-accumulating sequencing batch reactor

The fate of estrone (El), 17beta-estradiol (E2), and 17alpha-ethynylestradiol (EE2) was investigated in two nitrite-accumulating sequencing batch reactors operating under strictly aerobic (SBR1) conditions at different sludge ages (SRT, 1.7 to 17.1 d) and anoxic/anaerobic/aerobic (SBR2) conditions with different phases and durations of redox conditions, using a modified GC-MS analytical method for estrogen detection to ng/L concentrations. In SBR1, > or =98% of E2 was removed (specific E2 removal rate ranged from 0.375 (at SRT 17.1 d) to 2.625 (at SRT 1.7 d) microg E2 x g MLVSS(-1) x d(-1)) regardless of SRT or DO (<1.0 to >5.0 mg/L). Removal of E1 and, to a greater extent, EE2 was adversely affected when this reactor was operated at SRT shorterthan 5.7 d. However, whereas E1 was removed efficiently as long as SRT was long enough for AOB to bring about nitritation, EE2 removal efficiency was significantly lower when SBR1 was operated at SRT longer than 7.5 d. This reduced removal of EE2 may have been caused by the inhibition and toxicity of nitrite, both to the ammonium monooxygenase (AMO) and to the microbial population generally. In SBR2, less removal of E2 was found at the lower MLVSS concentrations, and E1 was not removed by sludge with poor settling qualities. The removal of EE2 observed in SBR2 was considered to be mainly a result of sorption. However, the binding of estrogens to the sludge in this reactor was apparently not as strong as the binding observed in the sludge of the strictly aerobic SBR1, since desorption was observed during the aeration phase in SBR2.

Multiresponse optimization and parallel factor analysis, useful tools in the determination of estrogens by gas chromatography–mass spectrometry

This paper reports an experimental design optimization of a recently proposed silylation procedure that avoids the introduction of false positives and false negatives in the simultaneous determination of steroid hormone estrone (E1) and 17-alpha-ethinylestradiol (EE2) by gas chromatography-mass spectrometry (GC/MS). The figures of merit for several calibration procedures were evaluated under optimum conditions in the silylation step. Internal standardization strategies were applied and global models were constructed by gathering signals recorded on three non-consecutive days. Three calibration models were examined: a univariate model with a sum of six monitorized ions and a three-way PARAFAC-based model (the analyte scores were standardized on the basis of the scores of the internal standard). The global PARAFAC-based calibration model showed the best performance with detection capabilities of 4.3 microg l(-1) and 7.0 microg l(-1) for E1 and EE2, respectively, when the probability of false positives was fixed at 1% and that of false negatives at 5%. Mean relative error in absolute terms for E1 and for EE2 was 11.1% and 8.5%, respectively, and trueness was likewise confirmed. The proposed optimized derivatization procedure using a three-way calibration function was also applied in the determination of E1, 17-beta-estradiol (E2) and EE2 in bovine urine samples: recovery values were 68.5%, 40.4% and 43.4%, respectively, and the detection capability was 18.4, 19.3 and 18.6 microg l(-1) when the probability of false positives was fixed at 1% and that of false negatives at 5%. Mean relative error in absolute terms for E1, E2 and EE2 was 7.4%, 9.4% and 8.6%, respectively, and trueness was likewise confirmed.

Exposure assessment of prepubertal children to steroid endocrine disrupters

Global concern has been raised in recent years over adverse effects that may result from exposure to chemicals that may interfere with the endocrine system. A specific question is related to low-dose effects and long-term exposure consequences, especially for critical populations (foetus, new born, prepubertal children). In this context, we decided to focus our attention on steroid hormones as they are the most potent endocrine disrupters. Our general goal is to investigate whether the steroid intake through food may represent a risk for prepubertal children, from an endocrine disruption point of view, especially with regard to the corresponding endogenous production level in this target population. As a starting point, it was estimated that a (re)-evaluation of the endogenous production of natural estrogens for this population was necessary, on the basis of a very sensitive and specific confirmatory measurement technique (gas chromatography-tandem mass spectrometry or gas chromatography-high resolution mass spectrometry). Thus, a new ultra-sensitive approach for steroid trace measurement in biological samples was developed, which was mainly based on a specific derivatisation (pentafluorobenzyl derivative) and negative chemical ionisation (NCI). Preliminary results obtained by applying this method on plasma samples from healthy prepubertal children demonstrated that estradiol endogenous level in prepubertal children is unsurprisingly very low. Estrone was determined in almost all samples at concentration in the 2-70 ng L(-1) range while 17alpha and 17beta estradiol were quantified in only few samples at concentrations ranging from 2 to 6 ng L(-1). Exogenous contributions of estrogens will therefore constitute a relatively higher proportion of sex hormone activity in the immature child.

Alkylphenol retention indices

A novel type of retention indices for alkylphenols and related compounds are proposed. The alkylphenol retention indices (APRI) use para-substituted n-alkylphenols as reference series. APRI for para-n-alkylphenols are per definition equal to the number of carbon atoms in the alkyl substituent; the value for phenol is zero. Application of the APRI system with different types of derivatisation of the phenolic hydroxy group showed that the derivatisation has limited influence on these indices. Especially para-substituted alkylphenols gave APRI values that could be transferred with high accuracy from one type of derivative to another. By comparing results obtained with different gradients in temperature-programmed GC, it was also shown that APRI is less affected by chromatographic conditions than retention indices based on n-alkanes.

Sensitive gas chromatographic–mass spectrometric method for the determination of phthalate esters, alkylphenols, bisphenol A and their chlorinated derivatives in wastewater samples

Phthalate esters, alkylphenols, bisphenol A and their chlorinated derivatives are the suspected endocrine disrupters or mutagens. These compounds, commonly called endocrine disrupter chemicals (EDCs), are widely used as plastic additives, lacquers, resins, or surfactants and can be usually found in environmental samples, namely wastewaters. An accurate and reproducible gas chromatographic-mass spectrometric (GC-MS) method is proposed to measure these compounds in wastewater samples of Granada city (Spain). A solid-phase extraction with LiChrolut RP-18 cartridges was carried out and the elution was performed with a diethyl ether/methanol mixture. After isolation, solvent was removed and a silylation step was carried out using N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA). Phthalate esters and silylated compounds were identified and quantified by GC-MS using a ZB-5 MS column. Bisphenol F was used as a surrogate. Quantification limits found were between 20 ng L(-1) for 4-nonylphenol and 400 ng L(-1) for benzylbutyl phthalate while inter and intra-day variability was under 5% in all cases. Recoveries for spiked samples were over 95% and under 105%. The method was validated using standard addition calibration and recovery assays.

Determination of steroid sex hormones in water and urine matrices by stir bar sorptive extraction and liquid chromatography with diode array detection

In this study, stir bar sorptive extraction and liquid desorption followed by high performance liquid chromatography with diode array detection (SBSE-LD-HPLC/DAD) were combined for the simultaneous determination of nine steroid sex hormones (estrone, 17alpha-estradiol, 17beta-estradiol, 17alpha-ethynylestradiol, diethylstilbestrol, mestranol, progesterone, 19-norethisterone and norgestrel) in water and urine matrices. During the method development, it has been demonstrated that equilibrium time, ionic strength and back extraction solvents are the most important parameters to control, for determining the nine-hormones in water matrices, in which stir bars coated with 126 microl of polydimethylsiloxane were used. Assays performed on 30 ml water samples spiked at 10 microg/l levels under optimised experimental conditions, yielded recoveries ranging from 11.1+/-4.9% (17beta-estradiol) to 100.2+/-10.4% (mestranol), showed that the methodology is well described by the octanol-water partition coefficients (K(PDMS/W) approximately K(O/W)) for the latter, while pronounced deviations to the theoretical efficiency (K(PDMS/W) not equal K(O/W)) were observed for the remaining hormones. From calibration studies, a good analytical performance for all hormones was attained, including a suitable precision (2.1-17.1%), low limits of detection (0.3-1.0 microg/l) and an excellent linear dynamic range (1.25-50.0 microg/l). Assays on environmental water and urine matrices showed recovery yields in worthy good agreement with the spiking level (10 microg/l), and suitability for profiling low microg/l levels of natural hormones in urine samples taken from pregnant women. The present methodology is easy, reliable and sensitive at the trace level, only requiring a low sample volume, showing to be a good analytical alternative to routine quality control for environmental and biomedical laboratories.

A sensitive determination of estrogens with a Pt nano-clusters/multi-walled carbon nanotubes modified glassy carbon electrode

On the top of a multi-walled carbon nanotubes (MWNTs) modified glassy carbon electrode (MWNTs/GCE), Pt nanoclusters were electrochemically deposited, fabricating a Pt/MWNTs composite modified electrode, Pt/MWNTs/GCE. X-ray photoelectron spectroscopy, powder X-ray diffraction and field emission scanning electron microscope were used for the surface characterization of the electrode, and demonstrated the formation and distribution of Pt clusters of Pt nanoparticles of 8.4 nm in averaged size in the MWNTs matrix. The preliminary study found that this composite modified electrode has strong electrocatalytic activity toward the oxidation of estrogens involving estradiol, estrone and estriol. The voltammetric behavior of estrogens on this electrode was investigated by cyclic voltammetry, linear sweep voltammetry and square-wave voltammetry. In comparison with the MWNTs/GCE or a Pt nanoparticles modified GCE prepared in the similar way, this composite modified electrode exhibited much higher current sensitivity and catalytic activity. This electrode is also stable. The linear range of square-wave voltammetric determination was 5.0 x 10(-7)-1.5 x 10(-5)mol/L for estradiol, 2.0 x 10(-6)-5.0 x 10(-5)mol/L for estrone, and 1.0 x 10(-6)-7.5 x 10(-5)mol/L for estriol. Under an assumption that the concentration ratio of estradiol:estrone:estriol is 2:2:1, the real sample of blood serums was tested for the determination using this electrode. Satisfactory result was obtained with averaged recovery of 105%.

Dual derivatization–stir bar sorptive extraction–thermal desorption–gas chromatography–mass spectrometry for determination of 17β-estradiol in water sample

A novel method for the trace analysis of 17beta-estradiol (E2) in river water sample was developed, which involved stir bar sorptive extraction (SBSE) with in situ acylation (first derivatization) and thermal desorption (TD) with quartz wool assisted (QWA) in tube silylation (second derivatization), followed by gas chromatography-mass spectrometry (GC-MS), and is called the "dual derivatization method." The optimum conditions for SBSE with in situ acylation, such as the volume of acetic acid anhydride and the extraction time, were investigated. In addition, the optimum conditions for TD with QWA in tube silylation, such as the volume of N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) and the TD temperature and hold time, were investigated as well. The detection limit (S/N = 3) and the quantitation limit (S/N>10) of E2 in the river water sample were 0.5 and 2 pg ml(-1) (ppt), respectively, by the dual derivatization method. In addition, the detection limit was 0.1 pg ml(-1) by using dual derivatization method with multi-shot mode. The calibration curve for E2 was linear in the range of 0.002-10 ng ml(-1) with correlation coefficients >0.999. The average recoveries of E2 (n = 6) at the concentrations of 0.05 and 1.0 ng ml(-1) from the river water sample were 93.1 (RSD: 1.4%) and 98.4% (RSD: 0.8%), respectively, with correction using the added surrogate standard, 17beta-estradiol-(13)C(4). This simple, accurate, sensitive and selective analytical method may be applicable to the determination of trace amounts of E2 in water samples.

Hemimicelle-based solid-phase extraction of estrogens from environmental water samples

Hemimicelles and admicelles of sodium dodecyl sulfate (SDS) on alumina and cetyltrimethyl ammonium bromide (CTAB) on silica were evaluated for the concentration and purification of the priority estrogens estrone (E(1)), 17beta-estradiol (E(2)) and ethynylestradiol (EE(2)) from sewage and river samples. Retention was based on analyte-sorbent hydrophobic and cation-pi interactions. Parameters affecting the SPE of estrogens on both types of sorbents were comparatively investigated. Adsolubilization was quantitative for SDS hemimicelles/admicelles and CTAB admicelles. SDS hemimicelle-coated alumina was the sorbent selected on the basis of the lower elution volume required and the higher sample flow rate allowed. Combination of estrogen adsolubilization-based SPE with liquid chromatography-diode array/fluorescence detection permitted the quantification of the target compounds with detection limits ranging from 20 to 100 ng l(-1). The relative standard deviation ranged from 3 to 8%. The approach developed was applied to the determination of estrogens in raw and treated sewage and river samples. The recovery found for estrogens in these environmental matrices was between 85 and 105%.

Steroid estrogens in ocean sediments

This paper gives results from a study measuring the abundance of steroid hormones in ocean sediments in the proximity of a deep ocean sewage outfall. The outfall is discharge point for an enhanced primary sewage treatment plant and sediment samples were taken adjacent and 7 km from the outfall. All samples contained steroid estrogens at nanogram per gram levels with higher concentrations at the 7 km sampling site. The concentration of estrone ranged from (0.16-1.17 ng/g), 17beta-estradiol (0.22-2.48 ng/g) and the synthetic 17alpha-ethinylestradiol (<0.05-0.5 ng/g). The values detected correspond with estimates based on the proportion of estrogens sorbed to particles in the effluent and the expected proportion of particles originating from sewage in the ocean sediments. The results suggest that estrogens associated with the particulate fraction aggregate on contact with high ionic strength seawater and settle to the seafloor after discharge through deep ocean outfalls.

Fully automated analysis of estrogens in environmental waters by in-tube solid-phase microextraction coupled with liquid chromatography–tandem mass spectrometry

A simple, rapid and sensitive method for the determination of five estrogens, estrone, 17beta-estradiol, estriol, ethynyl estradiol, and diethylstilbestrol, was developed using a fully automated method consisting of in-tube solid-phase microextraction (SPME) coupled with liquid chromatography-tandem mass spectrometry (LC/MS/MS). These estrogens were separated within 8 min by HPLC using an XDB-C8 column and 0.01% ammonia/acetonitrile (60/40, v/v) at a flow rate of 0.2 mL/min. Electrospray ionization conditions in the negative ion mode were optimized for MS/MS detection of the estrogens. The optimum in-tube SPME conditions were 20 draw/eject cycles of 40 microL of sample using a Supel-Q PLOT capillary column as an extraction device. The extracted compounds were easily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. Using the in-tube SPME LC/MS/MS method, good linearity of the calibration curve (r > or = 0.9996) was obtained in the concentration range from 10 to 200 pg/mL for all compounds examined. The limits of detection (S/N= 3) of the five estrogens examined ranged from 2.7 to 11.7 pg/mL. The in-tube SPME method showed 34-90-fold higher sensitivity than the direct injection method (5 microL injection). This method was applied successfully to the analysis of environmental water samples without any other pretreatment and interference peaks. Several surface water and wastewater samples were collected from the area around Asahi River, and estriol was detected at 35.7 pg/mL in the effluent of a sewage treatment plant. The recoveries of estrogens spiked into river waters were above 86%, except for estriol, and the relative standard deviations were below 0.9-8.8%.

Fate of steroid estrogens in Australian inland and coastal wastewater treatment plants

A comparison of estrone (E1), 17beta-estradiol (E2), and 17alpha-ethinylestradiol (EE2) removal at a coastal enhanced primary and inland advanced sewage treatment plant (STP) is reported. The average concentration of estrogens in the raw sewage is similar to that reported in other studies. The sequential batch reactor at the advanced STP removed on average 85% of the incoming E1 and 96% of the E2. Further removal was observed during later microfiltration with the estrogen concentration below detection (<0.1 ng x L(-1)) after reverse osmosis. Some 6% of the influent E1+E2 was removed in the waste activated sludge. The detection of EE2 in the waste activated sludge (0.42 ng x g(-1) solids dry weight), undetectable in the raw sewage, suggests that EE2 is resistant to biological treatment in the sequential batch reactor and is primarily removed due to sorption. Little estrogen removal was observed at the enhanced primary with only 7% of E1 and 0% of E2 removed. Low removal is expected based on the degree of estrogens partitioning in the organic fraction given the relatively low solids concentration, but surprisingly, some 43% of E2, 24% of E1, and 100% of EE2 remains associated with the solids fraction in the treated effluent. Further research is necessary to determine whether the low level of estrogen removal for the coastal treatment plant will adversely affect the receiving marine environment.

Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L(-1) in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS-MS) in electron-impact (EI) mode. The targeted estrogens included 17alpha- and 17beta-estradiol (aE2, bE2), estrone (E1), and 17alpha-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium - The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L(-1). aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.

Development and application of a multi-target immunoaffinity column for the selective extraction of natural estrogens from pregnant women's urine samples by capillary electrophoresis

In this paper, a methodology for the determination of three naturally occurring estrogens (estradiol, estrone and estriol) in pregnant women's urine has been described. The procedure included immunoaffinity column (IAC) extraction of 4 mL of urine sample and subsequent analysis of the extraction by micellar electrokinetic chromatography (MEKC). A multi-target polyclonal antibody that has high affinity to three estrogens was produced. Then the IAC was developed by coupling polyclonal antibody to CNBr-activated Sepharose 4B. The IAC showed high affinity for these estrogens. Recoveries of three estrogens from human serum matrix were greater than 92% with R.S.D. less than 4.5%. The final elute of urine sample was diluted with running buffer and then quantitated with MEKC. The experimental results demonstrated that IAC was a useful technique for extraction and concentration of estrogens from biological samples. Three estrogens levels in six pregnant women's urine were measured by both the present method and enzyme-linked immunoadsorbent assay (ELISA). The results of this method have been found to correlate well with those of ELISA.

Quantitative Analysis of 17 .BETA.-Estradiol in River Water by Fluorometric Enzyme Immunoassay Using Biotinylated Estradiol

A sensitive and simple immunoassay to determine 17beta-estradiol (E2) in fresh water was developed. The method is based on a solid-phase avidin-biotin binding assay and solid phase extraction. The binding event of E2 to the antibody is detected indirectly by the competitive reaction between E2 and biotinylated estradiol (BE) as a tracer for the limited binding sites of antibodies immobilized onto the wall of a microtiter plate. Namely, E2 concentrations are determined from the strong interaction between BE and avidin conjugated with horseradish peroxidase (avidin-HRP). In order to achieve a sensitive measurement for the binding of BE to the antibody immobilized on the microtiter plate substrate, QuantaBlu fluorogenic peroxidase substrate (QFPS) was employed. The detection limit and the linear range of E2 determination were 27 pM and 27 - 7480 pM, respectively. The relative standard deviations (RSD) for the E2 assay were between 0.3 and 12.0% (n = 3). The cross-reactivities of several other estrogens in this assay system were also investigated. No serious influences from any cross-reaction caused by other estrogens tested in this experiment were observed. The determination of E2 in water samples from eight rivers and a marsh in Hokkaido was performed by the immunoassay combined with solid phase extraction. It was found that the concentration of E2 was in the range between 0.06 and 67 pM.

Picogram per Liter Level Determination of Estrogens in Natural Waters and Waterworks by a Fully Automated On-Line Solid-Phase Extraction-Liquid Chromatography-Electrospray Tandem Mass Spectrometry Method

The present work describes a novel, fully automated method, based on on-line solid-phase extraction-liquid chromatography-electrospray tandem mass spectrometry (SPE-LC-ESI-MS-MS), which allows the unequivocal identification and quantification of the most environmentally relevant estrogens (estradiol, estrone, estriol, estradiol-17-glucuronide, estradiol-17-acetate, estrone-3-sulfate, ethynyl estradiol, diethylstilbestrol) in natural and treated waters at levels well below those of concern (limits of quantification between 0.02 and 1.02 ng/L). The method is highly precise, with relative standard deviations varying between 1.43 and 3.89%, and accurate (recovery percentages >74 %). This method was used to track the presence and fate of the target compounds in a waterworks and to evaluate the removal efficiency of the treatment processes applied. Only estrone and estrone-3-sulfate were detected in the river water used as source (at 0.68 and 0.33 ng/L, respectively). After progressive removal through the various treatment steps, none of them were detected in the finished drinking water. In addition to selectivity, sensitivity, repeatability, and automation (up to 15 samples plus 6 calibration solutions and 1 blank can be analyzed unattended), this technique offers fairly high throughput (analysis time per sample is 60 min), low time and solvent consumption, and ease of use.

Comparative study of analytical methods involving gas chromatography–mass spectrometry after derivatization and gas chromatography–tandem mass spectrometry for the determination of selected endocrine disrupting compounds in wastewaters

Two GC-MS methods, based on the application of N,O-bis(trimethylsilyl)trifluoroacetamide-derivatization-GC-MS (selected-ion monitoring) and GC-MS-MS without derivatization, respectively, were optimised and applied to the determination of a group of five selected endocrine disrupting compounds (EDCs) in wastewaters. Both methods included solid-phase extraction with Oasis HLB cartridges allowing an enrichment factor for wastewater samples of 100-fold. The investigated EDCs were estrone, 17beta-estradiol, 17alpha-ethynylestradiol, 4-tert-octylphenol and bisphenol A. Results obtained from the validation studies yielded comparable results in both cases. Recoveries in spiked wastewaters at 50 ng/l were higher than 90% for all the compounds, except for 4-tert-octylphenol (75%). Repeatability and reproducibility were adequate, varying from 1.6 to 14%, except for estrone which reproducibility was 28% when the derivatization-GC-MS method was applied. Limits of detection calculated ranged from 2.5 to 27.5 ng/l with differences between both methods from 1.1 (estrone) to 10.4 (bisphenol A) times. Both methods were successfully applied to the analysis of the target compounds in sewage treatment plant influents and effluents. Traces of bisphenol A, 4-tert-octylphenol, estrone and 17beta-estradiol were detected at concentration levels ranging from 13.3 to 1105.2 ng/l.

Quantitation of estrogens in ground water and swine lagoon samples using solid-phase extraction, pentafluorobenzyl/trimethylsilyl derivatizations and gas chromatography-negative ion chemical ionization tandem mass spectrometry

A method was developed for the confirmed identification and quantitation of 17beta-estradiol, estrone, 17alpha-ethynylestradiol and 16alpha-hydroxy-17beta-estradiol (estriol) in ground water and swine lagoon samples. Centrifuged and filtered samples were extracted using solid-phase extraction (SPE), and extracts were derivatized using pentafluorobenzy] bromide (PFBBR) and N-trimethylsilylimidazole (TMSI). Analysis was done using negative ion chemical ionization (NICI) gas chromatography-mass spectrometry-mass spectrometry (GC-MS-MS). Deuterated analogs of each of the estrogens were used as isotope dilution standards (IDS) and were added to the samples before extraction. A limit of quantitation of 1 ng/l in ground water was obtained using 500 ml of ground water sample, 1.0 ml of extract volume and the lowest calibration standard of 0.5 pg/microl. For a 25 ml swine lagoon sample, the limit of quantitation was 40 ng/l. The average recovery of the four estrogens spiked into 500 ml of distilled water and ground water samples (n = 16) at 2 ng/l was 103% (S.D. 14%). For 25 ml of swine lagoon samples spiked at 500, 1000 and 10,000 ng/l, the average recovery for the four estrogens was 103% (S.D. 15%). The method detection limits (MDLs) of the four estrogens spiked at 2 ng/l in a 500 ml of ground water sample ranged from 0.2 to 0.6 ng/l. In swine lagoon samples from three different types of swine operations, estrone was found at levels up to 25,000 ng/l, followed by estriol and estradiol up to levels at 10,000 and 3000 ng/l, respectively. It was found that pretreatment of swine lagoon samples with formaldehyde was necessary to prevent conversion of estradiol to estrone.

HPLC determination of estradiol, its degradation product, and preservatives in new topical formulation Estrogel HBF

This paper deals with the development of a novel method for simultaneous determination of estradiol, its degradation product estrone, and two preservatives, methylparaben and propylparaben, in the topical preparation Estradiol HBF. After optimization of the analytical conditions the method was validated and applied in studies of the stability of the topical preparation Estrogel HBF. Separation of all these compounds was performed on a Supelco Discovery C18 (250 mm x 3.0 mm, 5 microm) analytical column. A mixture of acetonitrile, methanol, and water (23:24:53 v/ v) was chosen as mobile phase. UV absorbance at 225 nm was used for detection and quantitation of analytes. The total analysis time was less than 12 min at a flow rate of 0.9 mL min(-1). All the compounds were isolated from the topical gel by simple extraction with an acetonitrile solution of hydrocortisone, as internal standard, and using sonication and centrifugation thereafter. The supernatant was injected directly on to the analytical column. The recovery of the procedure was from 96.9 to 100.4%. Validation of method according international guidelines was successfully performed.

Simultaneous determination of endocrine disrupting phenolic compounds and steroids in water by solid-phase extraction–gas chromatography–mass spectrometry

A solid-phase extraction (SPE)-gas chromatography (GC)-mass spectrometry (MS) analytical method for the simultaneous separation and determination of endocrine disrupting chemicals (EDCs) from water samples is described in detail. Important and contrasting EDCs including estrone, 17beta-estradiol, 17beta-ethynylestradiol, 16beta-hydroxyestrone, 4-nonylphenol, bisphenol A and 4-tert-octylphenol were selected as the target compounds. The SPE technique, followed by the derivatisation with bis (trimethylsilyl) trifluoroacetamide was used for the extraction recoveries of target compounds from water samples. A number of parameters that may affect the recovery of EDCs, such as the type of SPE cartridges, eluents, as well as water properties including pH value, and concentration of salts and humic substances were investigated. It is shown that the Oasis cartridges produced the best recoveries of target EDCs while ethyl acetate was efficient in eluting EDCs from SPE cartridges. The recovery of some EDCs was enhanced by the addition of salt, but reduced by the increase in pH value and humic acid concentration. The optimised method was further verified by performing spiking experiments in natural river water and seawater matrices, with good recovery and reproducibility for all the selected compounds. The established method was successfully applied to environmental water samples from East and West Sussex, UK, for the determination of the target EDCs.

Derivatization of Tributyltin with Sodium Tetrakis(4-fluorophenyl)-borate for Sensitivity Improvement of Tandem Mass Spectrometry

Derivatization of tributyltin for tandem mass spectrometry is described. Tributyltin (TBT) and triphenyltin (TPT) were derivatized with sodium tetrakis(4-fluorophenyl)borate. After optimization of their MS/MS conditions, derivatization conditions were examined. Under the optimum conditions using in-situ derivatization, the calibration curves for the TBT and TPT were linear in the ranges of 0.4 - 200 and 1.2 - 200 pg of Sn, respectively. The detection limits for TBT and TPT were 0.07 and 0.43 pg of Sn, respectively. In the case of TBT, the detection limit with 4-fluorophenylation was improved about five times compared with that with pentylation (0.35 pg). This improvement is ascribed to the bond-dissociation energy of Sn-aryl being stronger than that of Sn-alkyl. Namely, the selective fragmentation of 4-fluorophenyl TBT resulted in high sensitivity. The relative recoveries of TBT and TPT from seawater were 99 and 109%, respectively. The method was successfully applied to the seawater samples.

Measurement of endogenous estrogens: analytical challenges and recent advances

Recent developments in the analysis of endogenous estrogens (including both free and conjugated estrogens) are reviewed. Largely due to urging by some cancer researchers, new demands are now being placed on such measurements in terms of sensitivity, throughput, multi-analyte detection and accuracy. Especially high sensitivity is required for detecting estrogens in serum from postmenopausal women, children and men, where concentrations at the low pg/ml level are encountered, and one would prefer to test much less than 1 ml of serum. Aside from throughput, meeting all of these demands may be beyond the reach of immunoassay, the method that has created and continues to dominate this field. Both HPLC and GC versions of mass spectrometry are emerging that have some potential to improve the testing of physiological samples for endogenous estrogens. The following topics are covered in this review: related analyses (e.g. detection of estrogens in environmental samples such as water, where 1-1 samples can be collected to provide ng amounts of estrogens); structure and metabolism of estrogens; biological actions (with an emphasis on their role in cancer); immunoassays; HPLC with electrochemical detection; GC-ECD; and various forms of mass spectrometry.