Novel modes of capillary electrophoresis for the determination of endocrine disrupting chemicals

Laser-Induced Electrochemical Biosensor Modified with Graphene-Based Ink for Label-Free Detection of Alpha-Fetoprotein and 17β-Estradiol

In this research, a novel electrochemical biosensor is proposed based on inducing graphene formation on polyimide substrate via laser engraving. Graphene polyaniline (G-PANI) conductive ink was synthesized by planetary mixing and applied to the working zone of the developed sensor to effectively enhance the electrical signals. The laser-induced graphene (LIG) sensor was used to detect alpha-fetoprotein (AFP) and 17β-Estradiol (E2) in the phosphate buffer saline (PBS) buffer and human serum. The electrochemical performance of the biosensor in determining these biomarkers was investigated by differential pulse voltammetry (DPV) and chronoamperometry (CA). In a buffer environment, alpha-fetoprotein (AFP) and 17β-Estradiol detection range were 4-400 ng/mL and 20-400 pg/mL respectively. The experimental results showed a limit of detection (LOD) of 1.15 ng/mL and 0.96 pg/mL for AFP and estrogen, respectively, with an excellent linear range (R2 = 0.98 and 0.99). In addition, the designed sensor was able to detect these two types of biomarkers in human serum successfully. The proposed sensor exhibited excellent reproducibility, repeatability, and good stability (relative standard deviation, RSD = 0.96%, 1.12%, 2.92%, respectively). The electrochemical biosensor proposed herein is easy to prepare and can be successfully used for low-cost, rapid detection of AFP and E2. This approach provides a promising platform for clinical detection and is advantageous to healthcare applications.

Carboxyl functionalized sorbent based solid-phase extraction for sensitive determination of endocrine disrupting chemicals in bottled water, juice and milk

Endocrine disrupting chemicals (EDCs) pose a serious threat to human health even at extremely low concentration. Three carboxyl functionalized porous polymers (PDA-DPBP, PTCDA-DPBP and ODPA-DPBP) were synthesized for the first time and employed as solid-phase extraction sorbent to enrich phenolic EDCs at trace level. Compared with PTCDA-DPBP, ODPA-DPBP and corresponding carboxyl-free counterpart (PC-DPBP), PDA-DPBP delivered superior enrichment efficiency for the phenolic EDCs, which can be ascribed to the strong hydrogen bonding, pore filling, hydrophobic interaction and π-π interaction between PDA-DPBP and phenolic EDCs. Coupled with high performance liquid chromatography, phenolic EDC residues in bottled water, juice and milk samples were enriched and determined. At the optimum conditions, the PDA-DPBP based method provided a good linear response in the range of 0.04-100ng mL-1 for bottled water, 0.07-100ng mL-1 for juice and 0.15-500ng mL-1 for milk samples. The detection limits (S/N=3) were 0.01-0.04, 0.02-0.06 and 0.05-0.10ng mL-1 for bottled water, juice and milk, respectively. The method recoveries were in the range from 81.6% to 116%, with RSDs ≤ 7.7%. This work provides an attractive and reliable alternative method for sensitive determination of phenolic EDCs.

Design and fabrication of electrochemical sensor based on molecularly imprinted polymer loaded onto silver nanoparticles for the detection of 17-β-Estradiol

In this research report, we prepared an electrochemical sensor based on the molecularly imprinted poly(p-aminophenol) supported by silver nanoparticles capped with 2-mercaptobenzoxazole (AgNP) for the selective and sensitive detection of endocrine disrupting 17β-estradiol (E2). The electropolymerization of the functional monomer prepared the proposed MIP composite-based sensor in the presence of E2 as a template. The recognition materials were characterized using Fourier transform infrared, cyclic voltammetry (CV), square wave voltammetry (SWV), scanning electron microscopy, energy-dispersive X-ray spectroscopy and x-ray powder diffraction techniques. The electrochemical measurements were performed by employing both CV and SWV methods. We did the optimization of critical parameters affecting the sensor performances through the experimental design and verification. The developed sensor showed a linear range from 10 pM to 100 nM with the calculated quantification and detection limits of 1.86 pM and 6.19 pM, respectively. The incorporation of AgNP with high electrical conductivity into the MIP matrix enhanced the sensor's performance. Furthermore, the sensor was applied to determine E2 in real water samples without any sample preconcentration steps to achieve the percent recovery of 91.87-98.36% and acceptable reusability and storage stability performances. This article is protected by copyright. All rights reserved.

Graphitic carbon nitride and APTES modified advanced electrochemical biosensor for detection of 17β-estradiol in spiked food samples

This work demonstrates a simple and inexpensive electrochemical biosensing pathway for selective and sensitive recognition of 17β-estradiol (E2) in environmental and food samples. The biosensing system is based on graphitic carbon nitride (g-C₃N₄) and a conductive polymer 3-aminopropyltriethoxysilane (APTES). The proposed biosensor shows the ability to detect E2 in attomolar levels within a wide linear logarithm concentration range of 1 × 10⁻⁶ to 1 × 10⁻¹⁸ mol L⁻¹ with a limit of detection (LOD) of 9.9 × 10⁻¹⁹ mol L⁻¹. The selectivity of the developed biosensor was confirmed by conducting the DPV of similarly structured hormones and naturally occurring substances. The proposed biosensor is highly stable and applicable to detect E2 in the presence of spiked food and environmental samples with satisfactory recoveries ranging from 95.1 to 104.8%. So, the designed electrochemical biosensor might be an effective alternative tool for the detection of E2 and other endogenous substances to attain food safety.

This work demonstrates a simple and inexpensive electrochemical biosensing pathway for selective and sensitive recognition of 17β-estradiol (E2) in environmental and food samples.

Electrochemical biosensor for detection of 17β-estradiol using semi-conducting polymer and horseradish peroxidase

A convenient electrochemical sensing pathway for 17β-estradiol detection was investigated. The system is based on a conducting polymer and horseradish peroxidase (HRP) modified platinum (Pt) electrode. The miniature estradiol biosensor was developed and constructed through the immobilization of HRP in an electroactive surface of the electrode covered with electroconducting polymer – poly(4,7-bis(5-(3,4-ethylenedioxythiophene)thiophen-2-yl)benzothiadiazole). The detection strategy is based on the fact that 17β-estradiol (E2) and pyrocatechol (H₂Q) are co-substrates for the HRP enzyme. HRP, which does not react with E2, in the presence of H₂O₂ catalyses the oxidation of H₂Q to o-benzoquinone (Q). With the optimized conditions, such constructed biosensing system demonstrated a convenient level of sensitivity, selectivity in a broad linear range – 0.1 to 200 μM with a detection limit of 105 nM. Furthermore, the method was successfully applied for hormone detection in the presence of potential interfering compounds (ascorbic acid, estriol, estrone, uric acid and cholesterol).

A convenient electrochemical sensing pathway for 17β-estradiol detection was investigated.

A novel molecularly imprinted electrochemical sensor based on double sensitization by MOF/CNTs and Prussian blue for detection of 17β-estradiol

In this paper, we constructed MIL-53 (AlOHbdc, bdc = benzene-1,4-dicarboxylate) /CNTs and Prussian blue (PB) as the double sensitization material of the sensing platform, in which the MIL-53/CNTs hybrid can not only increase the specific surface area but also increase the conductivity of the sensor and PB can play a role in amplifying electrical signals and accelerating electron transmission. Pyrrole was used as monomer and E2 was used as template for electropolymerization to form conductive film. Moreover, the overoxidation/dedoping elution method were used to simplify the experimental process. Under optimal conditions, the MIECS exhibited an excellent sensitivity and high selectivity with a wide linear response range between 10^-14 to 10^-9 mol L^-1 and an estimated detection limit of 6.19 × 10^-15 mol L^-1.

Capillary Electrophoretic Analysis of Classical Organic Pollutants

The synthesis and usage of a wide range of organic compounds have shown a considerable increase in the past few decades. Many of these compounds are potential pollutants for the environment. They differ from each other in their chemical structure and properties. Correspondingly different separation strategies are required for their separation. There is need to assess the human exposure to these chemicals and to identify and develop analytical methods for their identification. In this chapter we have presented some methods for the separation and the analysis of the organic pollutants like dyes, phenolic pollutants, phthalates, endocrine disrupting chemicals, polycyclic aromatic hydrocarbon, explosives, agricultural pesticides, and toxins.

Assessment of aptamer-steroid binding using stacking-enhanced capillary electrophoresis

The binding affinity of 17β-estradiol with an immobilized DNA aptamer was measured using capillary electrophoresis. Estradiol captured by the immobilized DNA was injected into the separation capillary using pH-mediated sample stacking. Stacked 17β-estradiol was then separated using micellar electrokinetic capillary chromatography and detected with UV-visible absorbance. Standard addition was used to quantify the concentration of estradiol bound to the aptamer. Following incubation with immobilized DNA, analysis of free and bound estradiol yielded a dissociation constant of 70 ± 10 μM. The method was also used to screen binding affinity of the aptamer for estrone and testosterone. This study demonstrates the effectiveness of capillary electrophoresis to assess the binding affinity of DNA aptamers.

Mixture-designed electrolytes for the MEKC separation of natural and synthetic steroids

In this work, the separation of 11 natural and synthetic steroids was studied using MEKC electrolytes modified by property-selected organic solvents: ethanol, ACN, and THF. The interplay between electrophoretic behavior and structural features was disclosed and the effects of organic modifiers to modulate retention and to alter selectivity were discussed in terms of system linear solvation energy relationships (LSER). The LSER indicated the total organic solvent percentage in the electrolyte as a major parameter to control retention and as a minor contribution, the hydrogen bond acidity. By evaluating the electropherograms obtained from mixture-designed electrolytes, a favorable separation condition for all solutes was achieved in ca. 25 min with an electrolyte composed of 20 mmol/L sodium tetraborate at pH 9.4, 20 mmol/L SDS and 20% EtOH (0.80% CV for migration time and 2.5% CV for peak area, n = five consecutive injections). The applicability of the proposed separation condition was demonstrated by the inspection of estrogens in urine sample (puberty stage).

Capillary electrophoretic analysis of organic pollutants

Environmental pollutants comprise a variety of compounds from inorganic anions, cations, ionizable organic compounds and moderately hydrophobic organic compounds to highly hydrophobic organic compounds. Correspondingly different separation strategies are required for their separation. In this chapter, we have presented some methods for the separation and the analysis of the organic pollutants such as polycyclic aromatic hydrocarbons, phenoxy acids, dithiocarbamates, paraquat and diquat, endocrine disruptors, toxins and explosives.

Recent advances in capillary electrophoresis and capillary electrochromatography of pollutants

Recent advances in the CE and CEC separation, detection, and sample preparation methodologies applied to the determination of a variety of compounds having current or potential environmental relevance have been overviewed. The reviewed literature has illustrated the wide range of CE applications, indicating the continuing interest in CE and CEC in the environmental field.

On-chip micellar electrokinetic chromatographic separation of phenolic chemicals in waters

This paper describes on-chip micellar electrokinetic chromatography (MEKC) separation of bisphenol A and 3 kinds of alkylphenols, which have been recently recognized as endocrine disrupting chemicals for fish by the Japanese government, using microchip capillary electrophoresis with UV detection. We successfully obtained high-speed separation of the phenolic chemicals within 15 s as optimizing in microfluidic controls and MEKC separation conditions. We obtained fairly good linearity with correlation coefficient of over 0.98 from 0 to 50 mg/l phenolic chemicals except for 4-nonylphenol, which sample is the mixture of many geometrical isomers (r = 0.86). The values of the relative standard deviation for peak height in 50 mg/l phenolic chemicals were less than 8% except for bisphenol A (11.0%). The limits of detection obtained at a signal-to-noise ratio of 3 were from 5.6 to 20.0 mg/l. To realize on-site monitoring, we described strategy for on-chip MEKC analysis of the phenolic chemicals in waters using a portable analyzer based on microfluidic devices.

Separation and determination of phthalates by micellar electrokinetic chromatography

A method has been developed for the separation and determination of dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), di-(2-ethylhexyl) phthalate (DEHP) and di-n-octyl phthalate (DnOP) by micellar electrokinetic chromatography (MEKC). The baseline separation of phthalates was achieved by using a buffer of 100 mM sodium cholate, 50 mM borate and 15% methanol (pH 8.5). The optimized MEKC method was used to quantify the concentrations of phthalates in 11 soil samples from different regions of China. The contents of DEP, DBP and DEHP in soils were ranged 0-0.42, 0-1.43, and 0.24-2.35 mg/kg, respectively, and no DMP and DnOP was detected. The limits of detection for DMP, DEP, DBP, DEHP, and DnOP were found to be 0.050, 0.051, 0.052, 0.054, and 0.063 mg/kg, respectively. The results obtained by the MEKC method were compared with those obtained by gas chromatography with flame ionization detector (GC-FID), and a good agreement was achieved.

Determination of organic contaminants in food by capillary electrophoresis

This review addresses recent advances in the analysis of organic contaminants, such as antibiotics, pesticides, biological toxins, and food-borne pathogens, in foods by capillary electrophoresis (CE). Special attention is paid to those aspects that increase sensitivity and/or selectivity, such as sample extraction and concentration, on-line preconcentration techniques (stacking), affinity capillaries or/and specific detectors (laser induced fluorescence (LIF), mass spectrometry (MS)). The various CE modes used to separate the compounds and the quantification strategies are also examined. As a result, this work presents an updated overview on the principal applications of CE, together with a discussion of their main advantages and drawbacks, and an outline of future trends in the analysis of organic contaminants in food.

Recent advances in micellar electrokinetic chromatography

This review contains nearly 200 reference citations, and covers advances in electrokinetic capillary chromatography based on micelles, including stabilized micelle complexes, polymeric and mixed micelles from 2003-2004. Detection strategies, analyte determinations, and applications in micellar electrokinetic capillary chromatography (MEKC) are discussed. Information regarding methods of analyte concentration, analyte specific analyses, and nonstandard micelles has been summarized in tabular form to provide a means of rapid access to information pertinent to the reader.

Development of a biosensor for endocrine disrupting compounds based on tyrosinase entrapped within a poly(thionine) film

Preparation of semiconducting films by electropolymerisation of a monomer which is itself a redox mediator is an attractive and simple method for biosensor fabrication. A polymeric film of the redox dye thionine (phenothiazine) enables the stable immobilisation of polyphenol oxidase (tyrosinase) while acting as mediator for the enzymatic process. The immobilisation method is based on an inner crosslinked tyrosinase layer which contains thionine with an electropolymerised film of poly(thionine) on top. This method gave the most stable redox couple for poly(thionine) and exhibited the greatest response stability. The sensor was tested using a range of synthetic oestrogens and phenolic compounds, which are suspected endocrine disruptors/oestrogen mimics. The device responded well to all compounds tested with limits of detection ranging from 1 to 23 microM (based on three times S/N ratio). The tyrosinase/poly(thionine) electrode response to phenol was 3 orders of magnitude greater than the unmediated response in the absence of poly(thionine).

Pesticide analysis by capillary electrophoresis

In this work, a critical and updated revision of the current situation of the analysis of pesticides by Capillary Electrophoresis (CE) is presented. The review has been written in two main sections. The first one presents a thorough revision of the various offline and on-line sample preconcentration procedures that have been used in conjunction with CE to analyze these compounds. The second part reviews the various detection strategies (i.e., UV, LIF, MS, and electrochemical) and CE modes that have been applied to the analysis of pesticides. Future trends that can be expected from this hot research area are also discussed.