Fragrance chemistry

Diastereoselective Hydrogenation of Tetrasubstituted Olefins using a Heterogeneous Pt-Ni Alloy Catalyst

Stereoselective hydrogenation of tetrasubstituted olefins is an attractive method to access compounds with two contiguous stereocenters. However, homogeneous catalysts for enantio- and diastereoselective hydrogenation exhibit low reactivity toward tetrasubstituted olefins due to steric crowding between the ligand scaffold and the substrate. Monometallic heterogeneous catalysts, on the other hand, provide accessible surface active sites for hindered olefins but exhibit unpredictable and inconsistent stereoinduction. In this work, we develop a Pt-Ni bimetallic alloy catalyst that can diastereoselectively hydrogenate unactivated, sterically-bulky tetrasubstituted olefins, utilizing the more oxophilic Ni atoms to adsorb a hydroxyl directing group and direct facially-selective hydrogen addition to the olefin via the Pt atoms. Structure-activity studies on several Pt-Ni compositions underscore the importance of exposing a uniform PtNi alloy surface to achieve high diastereoselectivity and minimize side reactions. The optimized Pt-Ni/SiO2 catalyst exhibits good functional group tolerance and broad scope for tetrasubstituted olefins in a cyclopentene scaffold, generating cyclopentanol products with three contiguous stereocenters. The synthetic utility of the method is demonstrated in a four-step synthesis of (1R,2S)-(+)-cis-methyldihydrojasmonate with high yield and enantiopurity.

Sniffing Out the Sustainable Future: The Renewability Revolution in Fragrance Chemistry

In this review, the impact of the transition from today's resource-wasting petrochemical economy towards a 100/100 renewable and biodegradable future is discussed with respect to the fragrance families: "citrus", "green", "fruity", "floral", "floriental", "oriental", "woody", "chypre" and "fougère". After benchmark data on ingredients usage, definitions on biodegradation and sustainability are given. Celebrating the 150th anniversary of synthetic vanillin, its historic synthesis from renewable starting materials serves as introduction. In the grand scheme of things, citrus scents upcycled from the beverages industry, are already an ideal case for 100/100 with new opportunities for artificial essential oils. In the fruity domain, transparent and lactonic ingredients are available in a sustainable manner. However, in the domain of green odorants, there is a lack of green chemistry for important key materials. In the floral family, renewability is more critical than biodegradability, but cost is an issue. Thanks to Ambrox and maltol, florientals and orientals will persist, while woody notes severely lack an Iso E Super replacer. In the chypre genre, patchouli became the new moss, but more musks are increasingly in demand. With their high percentage of linalool and dihydromyrcenol, the construction of fougères could well become a precedent for other families, despite challenges in vetiver and salicylates. Still, the challenges exemplified here create immense opportunities for new perfumery materials.

Chemical and Redox Noninnocence of Pentane-2,4-dione Bis(S-methylisothiosemicarbazone) in Cobalt Complexes and Their Application in Wacker-Type Oxidation

Cobalt complexes with multiproton- and multielectron-responsive ligands are of interest for challenging catalytic transformations. The chemical and redox noninnocence of pentane-2,4-dione bis(S-methylisothiosemicarbazone) (PBIT) in a series of cobalt complexes has been studied by a range of methods, including spectroscopy [UV-vis, NMR, electron paramagnetic resonance (EPR), X-ray absorption spectroscopy (XAS)], cyclic voltammetry, X-ray diffraction, and density functional theory (DFT) calculations. Two complexes [CoIII(H2LSMe)I]I and [CoIII(LSMe)I2] were found to act as precatalysts in a Wacker-type oxidation of olefins using phenylsilane, the role of which was elucidated through isotopic labeling. Insights into the mechanism of the catalytic transformation as well as the substrate scope of this selective reaction are described, and the essential role of phenylsilane and the noninnocence of PBIT are disclosed. Among the several relevant species characterized was an unprecedented Co(III) complex with a dianionic diradical PBIT ligand ([CoIII(LSMe••)I]).

Recent advances in catalytic and non-catalytic epoxidation of terpenes: a pathway to bio-based polymers from waste biomass

Epoxides derived from waste biomass are a promising avenue for the production of bio-based polymers, including polyamides, polyesters, polyurethanes, and polycarbonates. This review article explores recent efforts to develop both catalytic and non-catalytic processes for the epoxidation of terpene, employing a variety of oxidizing agents and techniques for process intensification. Experimental investigations into the epoxidation of limonene have shown that these methods can be extended to other terpenes. To optimize the epoxidation of bio-based terpene, there is a need to develop continuous processes that address limitations in mass and heat transfer. This review discusses flow chemistry and innovative reactor designs as part of a multi-scale approach aimed at industrial transformation. These methods facilitate continuous processing, improve mixing, and either eliminate or reduce the need for solvents by enhancing heat transfer capabilities. Overall, the objective of this review is to contribute to the development of commercially viable processes for producing bio-based epoxides from waste biomass.

Thermal and (Thermo-Reversible) Photochemical Cycloisomerization of 1H-2-Benzo[c]oxocins: From Synthetic Applications to the Development of a New T-Type Molecular Photoswitch

A novel T-type molecular photoswitch based on the reversible cyclization of 1H-2-benzo[c]oxocins to dihydro-4H-cyclobuta[c]isochromenes has been developed. The switching mechanism involves a light-triggered ring-contraction of 8-membered 1H-2-benzo[c]oxocins to 4,6-fused O-heterocyclic dihydro-4H-cyclobuta[c]isochromene ring systems, with reversion back to the 1H-2-benzo[c]oxocin state accessible through heating. Both processes are unidirectional and proceed with good efficiency, with switching properties─including reversibility and half-life time─easily adjusted via structural functionalization. Our new molecular-switching platform exhibits independence from solvent polarity, originating from its neutral-charge switching mechanism, a property highly sought-after for biological applications. The photoinduced ring-contraction involves a [2+2] conjugated-diene cyclization that obeys the Woodward-Hoffmann rules. In contrast, the reverse process initiates via a thermal ring-opening (T > 60 °C) to produce the original 8-membered 1H-2-benzo[c]oxocins, which is thermally forbidden according to the Woodward-Hoffmann rules. The thermal ring-opening is likely to proceed via an ortho-quinodimethane (o-QDM) intermediate, and the corresponding switching mechanisms are supported by experimental observations and density functional theory calculations. Other transformations of 1H-2-benzo[c]oxocins were found upon altering reaction conditions: prolonged heating of the 1H-2-benzo[c]oxocins at a significantly elevated temperature (72 h at 120 °C), with the resulting dihydronaphthalenes formed via the o-QDM intermediate. These reactions also proceed with good chemoselectivities, providing new synthetic protocols for motifs found in several bioactive molecules, but are otherwise difficult to access.

Highly Regio- and Stereoselective Intramolecular Rearrangement of Glycidol Acetal to Alkoxy Cyclic Acetals

A new class of highly regio- and stereoselective intramolecular rearrangements of glycidol acetals to produce alkoxylated 1,3-dioxolane/1,3-dioxane is demonstrated. Selective Lewis acid activation of acetal generates an oxocarbenium ion that initiates the epoxide ring-opening event, giving the bicyclic [3,1,0]epoxonium ion intermediate that undergoes exo/endo-selective opening by a tethered alkoxide. Mechanistic insights into preferential acetal activation over the epoxide were obtained by crossover experiments. The method was applied in the total synthesis of parvistone B and its 8-ethoxy analogue.

A novel synthesis method of cyclopentadecanone and cyclopentadecanolide from vegetable oil

Malania oleifera Chum is a unique renewable plant resource in China, its fruit oil has a high content of 15-tetracosenic acid, and it is a good raw material for the synthesis of cyclopentadecanone and cyclopentadecanolide. A Novel synthesis method of cyclopentadecanone and cyclopentadecanolide from vegetable oil was designed, and the synthesis yields of c cyclopentadecanone and cyclopentadecanolide were 38.5% and 63.0%, respectively. The effect of different ester groups on cyclization of α,ω-difatty acid alkyl ester in cyclopentadecanone synthesis, and effect of catalysts on cyclization ofω-hydroxycarboxylic acid triglyceride in cyclopentadecanolide synthesis were investigated. The designed synthesis strategy has the characteristics of less synthesis steps and high utilization efficiency of 15-tetracosenic acid, which has simple and economic.

Stereo- and Site-Selective Conversion of Primary Alcohols to Allylic Alcohols via Ruthenium-Catalyzed Hydrogen Auto-Transfer Mediated by 2-Butyne

The first enantioselective ruthenium-catalyzed carbonyl vinylations via hydrogen autotransfer are described. Using a ruthenium-JOSIPHOS catalyst, primary alcohols 2a-2m and 2-butyne 1a are converted to chiral allylic alcohols 3a-3m with excellent levels of absolute stereocontrol. Notably, 1°,2°-1,3-diols participate in site-selective C-C coupling, enabling asymmetric carbonyl vinylation beyond premetalated reagents, exogenous reductants, or hydroxyl protecting groups. Using 2-propanol as a reductant, aldehydes dehydro-2a, 2l participate in highly enantioselective 2-butyne-mediated vinylation under otherwise identical reaction conditions. Regio-, stereo-, and site-selective vinylations mediated by 2-pentyne 1b to form adducts 3n, 3o, and epi-3o also are described. The tiglyl alcohol motif obtained upon butyne-mediated vinylation, which is itself found in diverse secondary metabolites, may be converted to commonly encountered polyketide stereodiads, -triads, and -tetrads, as demonstrated by the formation of adducts 4a-4d. The collective mechanistic studies, including deuterium labeling experiments, corroborate a catalytic cycle involving alcohol dehydrogenation to form a transient aldehyde and a ruthenium hydride, which engages in alkyne hydrometalation to form a nucleophilic vinylruthenium species that enacts carbonyl addition. A stereochemical model for carbonyl addition invoking formyl CH···I[Ru] and CH···O≡C[Ru] hydrogen bonds is proposed based on prior calculations and crystallographic data.

Facile anchoring mussel adhesive mimic tentacles on biodegradable polymer cargo carriers via self-assembly for microplastic-free cosmetics

Enhancing the deposition of fragrance delivery systems contained in personal care products on target surfaces is crucial for increasing the longevity of scent, efficiently utilizing expensive functional compounds and limiting the generation of microplastics in domestic waste water. In this work, we designed and synthesized a new type of biomimetic macromolecules, chitosan-graft-L-lysine-L-DOPA (C-L-D), as a versatile biodegradable adhesion promoter to facilitate the deposition of biodegradable fragrance carriers on diverse surfaces including hair, cotton and skin. The C-L-D has hyperbranched chain architecture with many oligopeptide adhesive tentacles, each being a simple mimic of mussel adhesive proteins. It also exhibits unique amphiphilic characteristic. As a result, it could be facilely anchored on cargo-loaded poly(lactic-co-glycolic acid) nanoparticle surface via self-assembly in the particle preparation process. The C-L-D-modified nanoparticles show significantly higher deposition efficiencies than polyvinyl alcohol- and chitosan-coated particles when deposited on the target surfaces in different aqueous media as the lysine and DOPA units are capable of providing multi-noncovalent interactions, including electrostatic, polar, hydrophobic interactions, and bidentate hydrogen bonds, with the target surfaces, and possibly also inducing oxidative cross-linking. A much higher retention rate of the C-L-D-modified nanoparticles on cotton surface is also observed after washing with a soap solution, which could be attributed to the significant role played by bidentate hydrogen bonds. These findings suggest that C-L-D is a versatile biodegradable adhesion promoter and has the potential to be applied for various personal care applications and beyond.

Occurrence of Marine Ingredients in Fragrance: Update on the State of Knowledge

The fragrance field of perfumes has attracted considerable scientific, industrial, cultural, and civilizational interest. The marine odor is characterized by the specific smell of sea breeze, seashore, algae, and oyster, among others. Marine odor is a more recent fragrance and is considered as one of the green and modern fragrances. The smells reproducing the marine environment are described due to their content of Calone 1951 (7-methyl-2H-1,5-benzodioxepin-3(4H)-one), which is a synthetic compound. In addition to the synthetic group of benzodioxepanes, such as Calone 51 and its derivatives, three other groups of chemical compounds seem to represent the marine smell. The first group includes the polyunsaturated cyclic ((+)-Dictyopterene A) and acyclic (giffordene) hydrocarbons, acting as pheromones. The second group corresponds to polyunsaturated aldehydes, such as the (Z,Z)-3,6-nonadienal, (E,Z)-2,6-nonadienal, which are most likely derived from the degradation of polyunsaturated fatty acids. The third group is represented by small molecules such as sulfur compounds and halogenated phenols which are regarded as the main flavor compounds of many types of seafood. This review exposes, most notably, the knowledge state on the occurrence of marine ingredients in fragrance. We also provide a detailed discussion on several aspects of essential oils, which are the most natural ingredients from various marine sources used in fragrance and cosmetics, including synthetic and natural marine ingredients.

Labdane Diterpenoids from Salvia tingitana Etl. Synergize with Clindamycin against Methicillin-Resistant Staphylococcus aureus

Quorum-sensing (QS) is a regulatory mechanism in bacterial communication, important for pathogenesis control. The search for small molecules active as quorum-sensing inhibitors (QSI) that can synergize with antibiotics is considered a good strategy to counteract the problem of antibiotic resistance. Here the antimicrobial labdane diterpenoids sclareol (1) and manool (2) extracted from Salvia tingitana were considered as potential QSI against methicillin-resistant Staphylococcus aureus. Only sclareol showed synergistic activity with clindamycin. The quantification of these compounds by LC-MS analysis in the organs and in the calli of S. tingitana showed that sclareol is most abundant in the flower spikes and is produced by calli, while manool is the major labdane of the roots, and is abundant also in the leaves. Other metabolites of the roots were abietane diterpenoids, common in Salvia species, and pentacyclic triterpenoids, bearing a γ-lactone moiety, previously undescribed in Salvia. Docking simulations suggested that 1 and 2 bind to key residues, involved in direct interactions with DNA. They may prevent accessory gene regulator A (AgrA) binding to DNA or AgrA activation upon phosphorylation, to suppress virulence factor expression. The antimicrobial activity of these two compounds probably achieves preventing upregulation of the accessory gene regulator (agr)-regulated genes.

Development of rapid and selective epoxidation of α-pinene using single-step addition of H2O2 in an organic solvent-free process

This study reports substantial improvement in the process for oxidising α-pinene, using environmentally friendly H₂O₂ at high atom economy (∼93%) and selectivity to α-pinene oxide (100%). The epoxidation of α-pinene with H₂O₂ was catalysed by tungsten-based polyoxometalates without any solvent. The variables in the screening parameters were temperatures (30–70 °C), oxidant amount (100–200 mol%), acid concentrations (0.02–0.09 M) and solvent types (i.e., 1,2-dichloroethane, toluene, p-cymene and acetonitrile). Screening the process parameters revealed that almost 100% selective epoxidation of α-pinene to α-pinene oxide was possible with negligible side product formation within a short reaction time (∼20 min), using process conditions of a 50 °C temperature in the absence of solvent and α-pinene/H₂O₂/catalyst molar ratio of 5 : 1 : 0.01. A kinetic investigation showed that the reaction was first-order for α-pinene and catalyst concentration, and a fractional order (∼0.5) for H₂O₂ concentration. The activation energy (E_a) for the epoxidation of α-pinene was ∼35 kJ mol⁻¹. The advantages of the epoxidation reported here are that the reaction could be performed isothermally in an organic solvent-free environment to enhance the reaction rate, achieving nearly 100% selectivity to α-pinene oxide.

Products obtained from the oxidation of α-pinene with hydrogen peroxide (H₂O₂) in the presence of tungsten-based polyoxometalates (α-pinene 1, α-pinene oxide 2, pinanediol 3, campholenic aldehyde 4, sobrerol 5, verbenol 6 and verbenone 7).

Catalytic Synthesis of 8-Membered Ring Compounds via Cobalt(III)-Carbene Radicals

The metalloradical activation of o-aryl aldehydes with tosylhydrazide and a cobalt(II) porphyrin catalyst produces cobalt(III)-carbene radical intermediates, providing a new and powerful strategy for the synthesis of medium-sized ring structures. Herein we make use of the intrinsic radical-type reactivity of cobalt(III)-carbene radical intermediates in the [CoII (TPP)]-catalyzed (TPP=tetraphenylporphyrin) synthesis of two types of 8-membered ring compounds; novel dibenzocyclooctenes and unprecedented monobenzocyclooctadienes. The method was successfully applied to afford a variety of 8-membered ring compounds in good yields and with excellent substituent tolerance. Density functional theory (DFT) calculations and experimental results suggest that the reactions proceed via hydrogen atom transfer from the bis-allylic/benzallylic C-H bond to the carbene radical, followed by two divergent processes for ring-closure to the two different types of 8-membered ring products. While the dibenzocyclooctenes are most likely formed by dissociation of o-quinodimethanes (o-QDMs) which undergo a non-catalyzed 8π-cyclization, DFT calculations suggest that ring-closure to the monobenzocyclooctadienes involves a radical-rebound step in the coordination sphere of cobalt. The latter mechanism implies that unprecedented enantioselective ring-closure reactions to chiral monobenzocyclooctadienes should be possible, as was confirmed for reactions mediated by a chiral cobalt-porphyrin catalyst.

When Gold Meets Perfumes: Synthesis of Olfactive Compounds via Gold-Catalyzed Cycloisomerization Reactions

An efficient, and mild synthetic route for the preparation of functionalized volatile oxa-bicyclo[4.1.0]-hept-4-ene (29 compounds, 44-98% isolated yields) has been developed relying on the association of IPrAuCl with NaBArF. The remarkable selectivity was demonstrated on a 1 g and 25 g scale with low catalyst loadings. The synthetic utility of these low-molecular-weight enols was further demonstrated by the derivatization of some adducts and by the unprecedented olfactory evaluation of all bicyclic derivatives.

Enzymatic cascade biosynthesis reaction of musky macrolactones from fatty acids

Musky macrolactones are an important group of compounds used in high-valued perfumery. An enzymatic cascade reaction including cytochrome P450 hydroxylase and lipase was explored to biosynthesize musky macrolactones. Firstly, fatty acids were hydroxylated by P450 hydroxylase to produce the corresponding ω-hydroxy fatty acids. Then ω-hydroxy fatty acids were lactonized by lipase. ω-Hydroxy fatty acids can difficultly be synthesized by traditional chemical methods, and the production of these compounds were key constraint factors during the whole reaction. To obtain enough precursors of macrolactones, an efficient production of ω-hydroxy fatty acids was explored. A mutant of P450 BM3 from Bacillus megaterium was used as terminal hydroxylases. To improve the yield of ω-hydroxy fatty acids, the coenzyme regeneration system and auxiliary organic solvent were optimized. The conversion using the P450 BM3 mutant under the biphase system was up to 42% towards ω-hydroxy pentadecanoic acid and 98% towards ω-hydroxy palmitic acid. The results reveal that the musky macrolactones, exaltolide and silvanone supra, could be synthesized in the hydroxylation-lactonization cascade reaction. Finally, 81 mg of exaltolide was obtained from 242 mg pentadecanoic acid, and 199 mg of silvanone supra from 256 mg palmitic acid.

Extraction of Natural Fragrance Ingredients: History Overview and Future Trends

For centuries, perfumes consisted in a combination of natural ingredients, mainly of plant origin. From the 19th century on, the advent of organic synthesis enabled the deployment of multiple synthetic olfactory notes, enriching significantly the perfumers' portfolio. Chemistry is ever since the foundation of modern perfumery. However, sustainable-minded consumers, massively rejecting synthetics for safety and ecological issues, engaged a global return to nature in numerous sectors, and the fragrance industry is not outdone. Sustainable extraction of natural products, making use of innovative technologies, process intensification and agro-based solvents, constitutes the answer to develop eco-conceived fragrant ingredients covering every olfactory family without endangering biodiversity any further. The objective of this review is to draw a clear picture of where those technological advances are today and to assess the ones that may be effectively transposed at the industrial scale tomorrow.

Regio- and Diastereoselective Iron-Catalyzed [4+4]-Cycloaddition of 1,3-Dienes

A family of single-component iron precatalysts for the [4+4]-cyclodimerization and intermolecular cross-[4+4]-cycloaddition of monosubstituted 1,3-dienes is described. Cyclooctadiene products were obtained with high regioselectivity, and catalyst-controlled access to either cis- or trans-diastereomers was achieved using 4-substituted diene substrates. Reactions conducted either with single-component precatalysts or with iron dihalide complexes activated in situ proved compatible with common organic functional groups and were applied on multigram scale (up to >100 g). Catalytically relevant, S = 1 iron complexes bearing 2-(imino)pyridine ligands, (^RPI)FeL₂ (^RPI = [2-(2,6-R₂-C₆H₃-N═CMe)-C₅H₄N] where R = ⁱPr or Me, L₂ = bis-olefin), were characterized by single-crystal X-ray diffraction, Mößbauer spectroscopy, magnetic measurements, and DFT calculations. The structural and spectroscopic parameters are consistent with an electronic structure description comprised of a high spin iron(I) center ( S_Fe = 3/2) engaged in antiferromagnetically coupling with a ligand radical anion ( S_PI = -1/2). Mechanistic studies conducted with these single-component precatalysts, including kinetic analyses, ¹²C/¹³C isotope effect measurements, and in situ Mößbauer spectroscopy, support a mechanism involving oxidative cyclization of two dienes that determines regio- and diastereoselectivity. Topographic steric maps derived from crystallographic data provided insights into the basis for the catalyst control through stereoselective oxidative cyclization and subsequent, stereospecific allyl-isomerization and C-C bond-forming reductive elimination.

Characterization of Eocene fossil resin from Moravia, Czech Republic: Insights into macromolecular structure

Two pieces of studlovite - Eocene amber from Študlov (Southeast Moravia, Czech Republic) were investigated. To arrive at a more detailed description, attenuated total reflection Fourier transform infrared spectroscopy, Raman spectroscopy, pyrolysis-gas chromatography/mass spectrometry, and gas chromatography-mass spectrometry were used. Both studlovite samples revealed signs of the same plant source, with higher polymerisation and a higher degree of maturation of the fossilized matter. Despite their close spectral resemblance, they differed in their detailed chemical composition, and in structure. Layering of one of the pieces studied showed how the resin was built and what impact the process had on the chemical composition of the amber. Characterization of the organic matter was completed with an analysis of trace elements in amber samples using scanning electron microscope combined with elemental distribution analysis (SEM/EDAX). The results demonstrated the paleoenvironmental conditions that occurred in the plant during resin exudation following wounding.

Synthesis, bioactivity and mode of action of 5A 5B 6C tricyclic spirolactones as novel antiviral lead compounds

BACKGROUND

Plant viral diseases cause tremendous decreases in yield and quality. Natural polycyclic compounds such as those containing carbocycles are often very important lead compounds for drug and pesticide development. Tricyclic spiranoid lactones with 5_A 5_B 6_C -ring fusion topologies possess various bioactivities. In this study, 33 new 5_A 5_B 6_C tricyclic spirolactones were rationally designed, synthesized, characterized and evaluated for antiviral activities.

RESULT

These compounds showed no apparent toxicity against Italian honeybees up to 2.73 µg bee^-1 . Spirolactones 14, 16, 19, 23 and 28 at a concentration of 100 µg mL^-1 inactivated 90% of tobacco mosaic virus (TMV) infection, making these compounds much more potent than the positive controls. Significantly, compound 19 displayed the best inactivation activity causing inhibition of up to 98%.

CONCLUSION

The results of the bioassays and QSAR studies indicated that the carbon-containing cyclic moiety was the antiviral pharmacophore, and derivative 19, which showed the best inactivation activity, could emerge as a potential antiviral agent against TMV. In vitro capsid protein (CP) assembly and TMV assembly inhibition determinations indicated that these compounds induced crosslinking in the TMV and prevented its uncoating, which was a putative new mode of action for TMV inactivation. © 2018 Society of Chemical Industry.

Synthesis and biological activity of new derivatives with the preserved carane system

Terpenoid derivatives, which contain a preserved carane system in their structure, exhibit a broad spectrum of biological activities. Among them, we can distinguish insecticides, structures with pharmacological application etc. In the presented paper, the substrate - (-)-cis-caran-trans-4-ol was transformed using the reactions of typical organic synthesis to obtain novel derivatives. Most importantly, bromolactone ((-)-(1R,4R,6S)-2'-(bromomethyl)-4,7,7-trimethylspiro[bicyclo[4.1.0]heptan-3,3'-furan]-5'(4'H)-one) with the preserved carane system was synthesized. This bromolactone was tested for antifeedant activity against the lesser mealworm, Alphitobius diaperinus Panzer, and peach potato aphid (Myzus persicae). In addition, its moderate antibacterial activity was observed against the Bacillus subtilis strain (with Minimal Inhibitory Concentration of 200 µg/mL).

Preparation of Musk-Smelling Macrocyclic Lactones from Biomass: Looking for the Optimal Substrate Combination

Macrocyclic musk belongs to a well-known and valued class of the fragrance family. Originally, natural musks were obtained from rectal musk glands which often led to the death of the animals. Recently, a lot of effort was invested to obtain such macrocycles in a synthetic way. This research presents a study on the preparation of macrocyclic lactones with the musk scent by ring-closing metathesis (RCM) using biomass-derived starting materials: oleic and 9-decenoic acid. An experimental rule correlating the C-C double bond substitution pattern in the starting diene and the yield for the RCM macrocyclization was proposed.

Synthesis of cyclic ethers by cyclodehydration of 1,n-diols using heteropoly acids as catalysts

Heteropoly acids were used as catalysts for cyclodehydration of various 1,n-diols. Cyclodehydration of butane-1,4-diol, pentane-1,5-diol and hexane-1,6-diol catalysed by H3PW12O40 gave tetrahydrofuran, tetrahydropyran and oxepane, respectively. Cyclodehydration of diethylene glycol, triethylene glycol, diethylene glycol monomethyl ether and polyethylene glycol 200 catalysed by H3PW12O40 gave 1,4-dioxane. In particular, cyclodehydration of hexane-1,6-diol gave an excellent yield of oxepane (80%). The selectivity exhibited by the H3PW12O40 catalyst was even better than that exhibited by other reported catalyst systems for similar cyclodehydration reactions.

In Depth Analysis of Chiroptical Properties of Enones Derived from Abietic Acid

With the use of inexpensive commercially available abietic acid, a whole series of abietane enones were prepared in high yields. The structures of all the products obtained were determined by comprehensive spectroscopic analysis with particular emphasis on the use of advanced NMR techniques, comparison with previously reported data and, where possible, by single crystal X-ray diffraction. However, in cases where X-ray crystallography was not applicable or compounds tested were unstable, a final stereochemical assignment could be inferred only by electronic circular dichroism (ECD) supported by vibrational circular dichroism to increase credibility. To reveal the relationship between structure and chiroptical properties, we used combined experimental and theoretical analysis of geometries, structural parameters, and chiroptical properties of all enones synthesized. A thorough analysis of their conformational flexibility by examining the effect of solvent and temperature on the ECD spectra was also used to achieve desired objectives. As a result, the impact of substituents adjacent to the enone chromophore on the conformation was determined by demonstrating that even slight changes in the position of hydroxyl and isopropyl groups attached to carbon C13 may substantially affect ECD curves' pattern, leading in some cases to Cotton effects sign reversal.

Ruthenium(0)-Catalyzed Cycloaddition of 1,2-Diols, Ketols, or Diones via Alcohol-Mediated Hydrogen Transfer

Merging the characteristics of transfer hydrogenation and carbonyl addition, a broad new class of ruthenium(0)-catalyzed cycloadditions has been developed. As discussed in this Minireview, fused or bridged bicyclic ring systems are accessible in a redox-independent manner in C-C bond-forming hydrogen transfer reactions of diols, α-ketols, or 1,2-diones with diverse unsaturated reactants.

Chemometric modeling of odor threshold property of diverse aroma components of wine

We have modelled here odor threshold properties (OTP) of various aroma components present in different types of wine using quantitative structure–property relationship (QSPR) studies employing both two-dimensional and three-dimensional descriptors.

Diversity in the Syntheses of Muscone, Muscopyridine and Civetone

Syntheses of muscone, muscopyridine and civetone since 1997 have been reviewed.

Mild, Redox-Neutral Formylation of Aryl Chlorides through the Photocatalytic Generation of Chlorine Radicals

We report a redox-neutral formylation of aryl chlorides that proceeds through selective 2-functionalization of 1,3-dioxolane through nickel and photoredox catalysis. This scalable benchtop approach provides a distinct advantage over traditional reductive carbonylation in that no carbon monoxide, pressurized gas, or stoichiometric reductant is employed. The mild conditions give unprecedented scope from abundant and complex aryl chloride starting materials.

One-pot synthesis of (-)-Ambrox

(−)-Ambrox is recognised as the prototype of all ambergris odorants. Widely used in perfumery, (−)-Ambrox is an important ingredient due to its unique scent and excellent fixative function. An environmentally friendly and practical preparation of (−)-Ambrox is still unavailable at present although a lot of attention has been paid to this hot research topic for many years. A one-pot synthesis of (−)-Ambrox was studied starting from (−)-sclareol through oxidation with hydrogen peroxide in the presence of a quaternary ammonium phosphomolybdate catalyst {[C₅H₅NC₁₆H₃₃] [H₂PMo₁₂O₄₀]}, which gave the product a 20% overall yield.

Olfactory Sensitivity in Mammalian Species

Olfaction enables most mammalian species to detect and discriminate vast numbers of chemical structures called odorants and pheromones. The perception of such chemical compounds is mediated via two major olfactory systems, the main olfactory system and the vomeronasal system, as well as minor systems, such as the septal organ and the Grueneberg ganglion. Distinct differences exist not only among species but also among individuals in terms of their olfactory sensitivity; however, little is known about the mechanisms that determine these differences. In research on the olfactory sensitivity of mammals, scientists thus depend in most cases on behavioral testing. In this article, we reviewed scientific studies performed on various mammalian species using different methodologies and target chemical substances. Human and non-human primates as well as rodents and dogs are the most frequently studied species. Olfactory threshold studies on other species do not exist with the exception of domestic pigs. Olfactory testing performed on seals, elephants, and bats focused more on discriminative abilities than on sensitivity. An overview of olfactory sensitivity studies as well as olfactory detection ability in most studied mammalian species is presented here, focusing on comparable olfactory detection thresholds. The basics of olfactory perception and olfactory sensitivity factors are also described.