Literature review--efficacy of various disinfectants against Legionella in water systems

Two-year evaluation of Legionella in an aging residential building: Assessment of multiple potable water remediation approaches

Legionella is an opportunistic waterborne pathogen that is difficult to eradicate in colonized drinking water pipes. Legionella control is further challenged by aging water infrastructure and lack of evidence-based guidance for building treatment. This study assessed multiple premise water remediation approaches designed to reduce Legionella pneumophila within a residential building located in an aging, urban drinking water system over a two-year period. Samples (n = 745) were collected from hot and cold-water lines and quantified via most probable number culture. Building-level treatment approaches included three single heat shocks, three single chemical shocks, and continuous low-level chemical disinfection in the potable water system. The building was highly colonized with L. pneumophila with 71 % L. pneumophila positivity. Single heat shocks had a statistically significant L. pneumophila reduction one day post treatment but no significant L. pneumophila reduction at one week, two weeks, and four weeks post treatment. The first two chemical shocks resulted in statistically significant L. pneumophila reduction at two days and four weeks post treatment, but there was a significant L. pneumophila increase at four weeks following the third chemical shock. Continuous low-level chemical disinfection resulted in statistically significant L. pneumophila reduction at ten weeks post treatment implementation. This demonstrates that in a building highly colonized with L. pneumophila, sustained remediation is best achieved using continuous low-level chemical treatment.

Residual disinfectant effectively suppresses Legionella species in drinking water distribution systems supplied by surface water in Minnesota, USA

Seven public water systems in Minnesota, USA were analyzed from one to five times over a two-year period to assess temporal changes in the concentrations of total bacteria, Legionella spp., and Legionella pneumophila from source (i.e., raw water) through the water treatment process to the end water user. Bacterial biomass was collected by filtering large volumes of raw water (12 to 425 L, median: 38 L) or finished and tap water (27 to 1205 L, median: 448 L) using ultrafiltration membrane modules. Quantitative PCR (qPCR) was then used to enumerate all bacteria (16S rRNA gene fragments), all Legionella spp. (ssrA), and Legionella pneumophila (mip). Total coliforms, Escherichia coli, and L. pneumophila also were quantified in the water samples via cultivation. Median concentrations of total bacteria and Legionella spp. (ssrA) in raw water (8.5 and 4.3 log copies/L, respectively) decreased by about 2 log units during water treatment. The concentration of Legionella spp. (ssrA) in water collected from distribution systems inversely correlated with the total chlorine concentration for chloraminated systems significantly (p = 0.03). Although only 8 samples were collected from drinking water distribution systems using free chlorine as a residual disinfectant, these samples had significantly lower concentrations of Legionella spp. (ssrA) than samples collected from the chloraminated systems (p = 5 × 10-4). There was considerable incongruity between the results obtained via cultivation-independent (qPCR) and cultivation-dependent assays. Numerous samples were positive for L. pneumophila via cultivation, none of which tested positive for L. pneumophilia (mip) via qPCR. Conversely, a single sample tested positive for L. pneumophilia (mip) via qPCR, but this sample tested negative for L. pneumophilia via cultivation. Overall, the results suggest that conventional treatment is effective at reducing, but not eliminating, Legionella spp. from surface water supplies and that residual disinfection is effective at suppressing these organisms within drinking water distribution systems.

Host-bacteria interactions: ecological and evolutionary insights from ancient, professional endosymbionts

Interactions between eukaryotic hosts and their bacterial symbionts drive key ecological and evolutionary processes, from regulating ecosystems to the evolution of complex molecular machines and processes. Over time, endosymbionts generally evolve reduced genomes, and their relationship with their host tends to stabilize. However, host-bacteria relationships may be heavily influenced by environmental changes. Here, we review these effects on one of the most ancient and diverse endosymbiotic groups, formed by-among others-Legionellales, Francisellaceae, and Piscirickettsiaceae. This group is referred to as Deep-branching Intracellular Gammaproteobacteria (DIG), whose last common ancestor presumably emerged about 2 Ga ago. We show that DIGs are globally distributed, but generally at very low abundance, and are mainly identified in aquatic biomes. Most DIGs harbour a type IVB secretion system, critical for host-adaptation, but its structure and composition vary. Finally, we review the different types of microbial interactions that can occur in diverse environments, with direct or indirect effects on DIG populations. The increased use of omics technologies on environmental samples will allow a better understanding of host-bacterial interactions and help unravel the definition of DIGs as a group from an ecological, molecular, and evolutionary perspective.

Increased flushing frequency of a model plumbing system initially promoted the formation of viable but non culturable cells but ultimately reduced the concentration of culturable and total Legionella DNA

Legionella is the causative agent of Legionnaires' disease, and its prevalence in potable water is a significant public health issue. Water stagnation within buildings increases the risk of Legionella. However, there are limited studies investigating how stagnation arising through intermittent usage affects Legionella proliferation and the studies that are available do not consider viable but non culturable (VBNC) Legionella. This study used a model plumbing system to examine how intermittent water stagnation affects both VBNC and culturable Legionella. The model plumbing system contained a water tank supplying two biofilm reactors. The model was initially left stagnant for ≈5 months (147 days), after which one reactor was flushed daily, and the other weekly. Biofilm coupons, and water samples were collected for analysis at days 0, 14 and 28. These samples were analysed for culturable and VBNC Legionella, free-living amoebae, and heterotrophic bacteria. After 28 days, once-a-day flushing significantly (p < 0.001) reduced the amount of biofilm-associated culturable Legionella (1.5 log10 reduction) compared with weekly flushing. However, higher counts of biofilm-associated VBNC Legionella (1 log10 higher) were recovered from the reactor with once-a-day flushing compared with weekly flushing. Likewise, once-a-day flushing increased the population of biofilm-associated Vermamoeba vermiformis (approximately 3 log10 higher) compared with weekly flushing, which indicated a positive relationship between VBNC Legionella and V. vermiformis. This is the first study to investigate the influence of stagnation on VBNC Legionella under environmental conditions. Overall, this study showed that a reduction in water stagnation decreased culturable Legionella but not VBNC Legionella.

Adherence to Legionella control regulations and guidelines in Norwegian nursing homes: a cross-sectional survey

BACKGROUND

Infection by Legionella bacteria is a risk to elderly individuals in health care facilities and should be managed by preventing bacterial proliferation in internal water systems. Norwegian legislation calls for a mandatory Legionella-specific risk assessment with the subsequent introduction of an adapted water management programme. The present study investigates adherence to legislation and guidelines on Legionella control and prevention in Norwegian nursing homes.

METHODS

A cross-sectional survey was distributed to Norwegian municipalities to investigate the status of Legionella specific risk assessments of internal water distribution systems and the introduction of water management programmes in nursing homes.

RESULTS

A total of 55.1% (n = 228) of the participating nursing homes had performed Legionella-specific risk assessments, of which 55.3% (n = 126) stated that they had updated the risk assessment within the last year. 96.5% introduced a water management programme following a risk assessment, whereas 59.6% of the ones without a risk assessment did the same. Nursing homes with risk assessments were more likely to monitor Legionella levels than those without (61.2% vs 38.8%), to remove dead legs (44.7% vs 16.5%), and to select biocidal preventive treatment over hot water flushing (35.5% vs 4.6%).

CONCLUSIONS

This study presents novel insight into Legionella control in Norway, suggesting that adherence to mandatory risk assessment in nursing homes is moderate-low. Once performed, the risk assessment seems to be advantageous as an introduction to future Legionella prevention in terms of the scope and contents of the water management programme.

Opportunistic Pathogens in Drinking Water Distribution Systems-A Review

In contrast to "frank" pathogens, like Salmonella entrocolitica, Shigella dysenteriae, and Vibrio cholerae, that always have a probability of disease, "opportunistic" pathogens are organisms that cause an infectious disease in a host with a weakened immune system and rarely in a healthy host. Historically, drinking water treatment has focused on control of frank pathogens, particularly those from human or animal sources (like Giardia lamblia, Cryptosporidium parvum, or Hepatitis A virus), but in recent years outbreaks from drinking water have increasingly been due to opportunistic pathogens. Characteristics of opportunistic pathogens that make them problematic for water treatment include: (1) they are normally present in aquatic environments, (2) they grow in biofilms that protect the bacteria from disinfectants, and (3) under appropriate conditions in drinking water systems (e.g., warm water, stagnation, low disinfectant levels, etc.), these bacteria can amplify to levels that can pose a public health risk. The three most common opportunistic pathogens in drinking water systems are Legionella pneumophila, Mycobacterium avium, and Pseudomonas aeruginosa. This report focuses on these organisms to provide information on their public health risk, occurrence in drinking water systems, susceptibility to various disinfectants, and other operational practices (like flushing and cleaning of pipes and storage tanks). In addition, information is provided on a group of nine other opportunistic pathogens that are less commonly found in drinking water systems, including Aeromonas hydrophila, Klebsiella pneumoniae, Serratia marcescens, Burkholderia pseudomallei, Acinetobacter baumannii, Stenotrophomonas maltophilia, Arcobacter butzleri, and several free-living amoebae including Naegleria fowleri and species of Acanthamoeba. The public health risk for these microbes in drinking water is still unclear, but in most cases, efforts to manage Legionella, mycobacteria, and Pseudomonas risks will also be effective for these other opportunistic pathogens. The approach to managing opportunistic pathogens in drinking water supplies focuses on controlling the growth of these organisms. Many of these microbes are normal inhabitants in biofilms in water, so the attention is less on eliminating these organisms from entering the system and more on managing their occurrence and concentrations in the pipe network. With anticipated warming trends associated with climate change, the factors that drive the growth of opportunistic pathogens in drinking water systems will likely increase. It is important, therefore, to evaluate treatment barriers and management activities for control of opportunistic pathogen risks. Controls for primary treatment, particularly for turbidity management and disinfection, should be reviewed to ensure adequacy for opportunistic pathogen control. However, the major focus for the utility's opportunistic pathogen risk reduction plan is the management of biological activity and biofilms in the distribution system. Factors that influence the growth of microbes (primarily in biofilms) in the distribution system include, temperature, disinfectant type and concentration, nutrient levels (measured as AOC or BDOC), stagnation, flushing of pipes and cleaning of storage tank sediments, and corrosion control. Pressure management and distribution system integrity are also important to the microbial quality of water but are related more to the intrusion of contaminants into the distribution system rather than directly related to microbial growth. Summarizing the identified risk from drinking water, the availability and quality of disinfection data for treatment, and guidelines or standards for control showed that adequate information is best available for management of L. pneumophila. For L. pneumophila, the risk for this organism has been clearly established from drinking water, cases have increased worldwide, and it is one of the most identified causes of drinking water outbreaks. Water management best practices (e.g., maintenance of a disinfectant residual throughout the distribution system, flushing and cleaning of sediments in pipelines and storage tanks, among others) have been shown to be effective for control of L. pneumophila in water supplies. In addition, there are well documented management guidelines available for the control of the organism in drinking water distribution systems. By comparison, management of risks for Mycobacteria from water are less clear than for L. pneumophila. Treatment of M. avium is difficult due to its resistance to disinfection, the tendency to form clumps, and attachment to surfaces in biofilms. Additionally, there are no guidelines for management of M. avium in drinking water, and one risk assessment study suggested a low risk of infection. The role of tap water in the transmission of the other opportunistic pathogens is less clear and, in many cases, actions to manage L. pneumophila (e.g., maintenance of a disinfectant residual, flushing, cleaning of storage tanks, etc.) will also be beneficial in helping to manage these organisms as well.

Inactivation efficacy and mechanisms of wavelength-specific UV sources for various strains of Legionella pneumophila serogroup 1

Infections of Legionnaires' disease in the United States caused by Legionella have increased ninefold between the years 2000-2018. Legionella harbored in biofilms or inside amoeba within premise plumbing can be more resistant to disinfectants, thus causing treatment challenges. Ultraviolet-light emitting diodes (UV-LEDs) are an emerging water disinfection technology with several advantages over conventional UV lamps. In this study, we evaluated the effects of UV-LEDs (255, 265, and 285 nm), a low-pressure (LP) mercury UV lamp (254 nm), and a bandpass filtered medium-pressure (MP) mercury UV lamp (220 nm) on properties and inactivation of three strains of L. pneumophila serogroup 1. The UV-LEDs emitting at 255 and 265 nm showed greater inactivation performance against all the strains compared to the UV-LED at 285 nm and the LP UV lamp at 254 nm. Our results showed that strains of the same serogroup exhibited different UV sensitivities. Analyses of DNA and protein damage revealed that UV exposure using 254, 255, and 265 nm predominantly causes DNA damage, while protein damage is predominant at 220 nm. Both DNA and protein damage were observed at 285 nm, but the extent of DNA damage was relatively less significant compared to the other wavelengths. Electric energy consumption analysis showed that water treatment using UV-LEDs is currently unsatisfactory compared to conventional LP UV lamps due to the mediocre wall plug efficiency (WPE) of UV-LEDs. However, recent studies indicate that the WPE of UV-LEDs is continuously improving. Overall, our study highlights that UV-LEDs are a promising technology for inactivating waterborne pathogens and have the potential to replace existing UV mercury lamps for water disinfection applications.

Bromine and Chlorine Disinfection of Cryptosporidium parvum Oocysts, Bacillus atrophaeus Spores, and MS2 Coliphage in Water

Conventional water treatment practices utilizing chemical disinfection, especially chlorination, are considered generally effective in producing microbiologically safe drinking water. However, protozoan pathogens such as oocysts of Cryptosporidium parvum are very resistant to chlorine, which has led to consideration of alternative disinfectants for their control. Free bromine, HOBr, has not been evaluated extensively as an alternative halogen disinfectant for inactivation of Cryptosporidium parvum in drinking water or reclaimed water for non-potable uses. Bromine is a versatile disinfectant consisting of different chemical forms with persistent microbicidal efficacy under varied water quality conditions and is effective against a range of waterborne microbes of health concern. The objectives of this study are to (1) compare the efficacy of free bromine to free chlorine at similar concentrations (as milligrams per liter) for disinfection of Cryptosporidium parvum oocysts, Bacillus atrophaeus spores, and MS2 coliphage in a model buffered water and (2) evaluate the kinetics of inactivation of these microorganisms using appropriate disinfection models. Overall, at a target concentration of ∼5 mg/L, bromine averaged 0.6 log (73.8%) reductions of C. parvum oocyst infectivity after 300 min (CT: 1166 min·mg/L) and produced up to a 0.8 log reduction disinfectant activity. An ∼5.0 mg/L chlorine dose increased oocyst infectivity by only 0.4 log (64%) after 300 min (CT: 895 min·mg/L). Bacillus atrophaeus spores and MS2 coliphage treated with bromine and chlorine were reduced by 4 log10 (99.99%) for both disinfectants over the duration of the experiments.

Synthesis of Mesoporous Lanthanum-Doped SnO2 Spheres for Sensitive and Selective Detection of the Glutaraldehyde Disinfectant

Glutaraldehyde disinfectant has been widely applied in aquaculture, farming, and medical treatment. Excessive concentrations of glutaraldehyde in the environment can lead to serious health hazards. Therefore, it is extremely important to develop high-performance glutaraldehyde sensors with low cost, high sensitivity, rapid response, fabulous selectivity, and low limit of detection. Herein, mesoporous lanthanum (La) doped SnO2 spheres with high specific surface area (52-59 m2 g-1), uniform mesopores (with a pore size concentrated at 5.7 nm), and highly crystalline frameworks are designed to fabricate highly sensitive gas sensors toward gaseous glutaraldehyde. The mesoporous lanthanum-doped SnO2 spheres exhibit excellent glutaraldehyde-sensing performance, including high response (13.5@10 ppm), rapid response time (28 s), and extremely low detection limit of 0.16 ppm. The excellent sensing performance is ascribed to the high specific surface area, high contents of chemisorbed oxygen species, and lanthanum doping. DFT calculations suggest that lanthanum doping in the SnO2 lattice can effectively improve the adsorption energy toward glutaraldehyde compared to pure SnO2 materials. Moreover, the fabricated gas sensors can effectively detect commercial glutaraldehyde disinfectants, indicating a potential application in aquaculture, farming, and medical treatment.

Effects of photochlorination on the physicochemical transformation of polystyrene nanoplastics: Mechanism and environmental fate

With the increasingly severe plastic pollution, the environmental behavior and effects of nanoplastics (NPs) have attracted much attention. The transformation of NPs in natural and engineered environments (e.g., photooxidation, disinfection) can significantly alter the physicochemical properties and thus affect the fate and toxicity of NPs. However, how solar irradiation with free chlorine, an inevitable process once NPs enter the environment from wastewater treatment plants, affects the physicochemical properties of NPs is still unclear. In this study, the behavior and mechanism of polystyrene (PS) NPs transformation in the solar/chlorine process were evaluated. The results demonstrated that solar irradiation significantly enhanced the physicochemical transformation of PS NPs during chlorination, including chain scission, surface oxidation, and organic release. In addition, two-dimensional correlation spectroscopy analysis using Fourier transform infrared spectroscopy and reactive species quenching experiments showed that chain scission and surface oxidation of PS NPs were primarily caused by direct oxidation of hydroxyl radicals and ozone, while reactive chlorine species played an indirect role. Moreover, photochlorination-induced changes in the properties of PS NPs enhanced the colloidal stability in synthetic wastewater solution and toxicity to Caenorhabditis elegans. These findings reveal an important transformation behavior of nanoplastics in the environment and emphasize the importance of accounting for photochlorination to accurately assess the ecological risk of nanoplastics.

Listeria Occurrence in Conventional and Alternative Egg Production Systems

Listeria continues to be a persistent foodborne pathogen that is responsible for human cases of listeriosis when contaminated food products are consumed. Human subjects considered to be most susceptible include the elderly, immunocompromised, and pregnant women. Listeria is characterized as a saprophytic organism with the capability of responding and adapting to constantly changing environments because it possesses multiple stress response mechanisms to overcome varying temperatures, salt concentrations, and pH, among others. Primary foods and food products associated with listeriosis include dairy products and ready-to-eat meats such as turkey products. Historically, chicken eggs have not been identified as a primary source of Listeria, but the potential for contamination during egg production and processing does exist. Listeria species have been isolated from egg-processing plant equipment and are presumed to occur in egg-processing plant environments. Whether Listeria is consistently disseminated onto eggs beyond the egg-processing plant is a risk factor that remains to be determined. However, research has been conducted over the years to develop egg wash solutions that generate combinations of pH and other properties that would be considered inhibitory to Listeria. Even less is known regarding the association of Listeria with alternative egg production systems, but Listeria has been isolated from pasture flock broilers, so it is conceivable, given the nature of the outdoor environments, that layer birds under these conditions would also be exposed to Listeria and their eggs become contaminated. This review focuses on the possibility of Listeria occurring in conventional and alternative egg-laying production and processing systems.

Two-Year Evaluation of Legionella in an Aging Residential Building: Assessment of Multiple Potable Water Remediation Approaches

Legionella is an opportunistic waterborne pathogen that is difficult to eradicate in colonized drinking water pipes. Legionella control is further challenged by aging water infrastructure and lack of evidence-based guidance for building treatment. This study assessed multiple premise water remediation approaches designed to reduce Legionella pneumophila (Lp) within a residential building located in an aging, urban drinking water system over a two-year period. Samples (n=745) were collected from hot and cold-water lines and quantified via most probable number culture. Building-level treatment approaches included three single heat shocks (HS), three single chemical shocks (CS), and continuous low-level chemical disinfection (CCD) in the potable water system. The building was highly colonized with Lp with 71% Lp positivity. Single HS had a statistically significant Lp reduction one day post treatment but no significant Lp reduction one, two, and four weeks post treatment. The first two CS resulted in statistically significant Lp reduction at two days and four weeks post treatment, but there was a significant Lp increase at four weeks following the third CS. CCD resulted in statistically significant Lp reduction ten weeks post treatment implementation. This demonstrates that in a building highly colonized with Lp, sustained remediation is best achieved using CCD.

Evaluation of a novel porous antimicrobial media for industrial and HVAC water biocontrol

A novel treatment method, consisting of pea-gravel with a marine coating supplemented with alkyldimethylbenzylammonium chloride (ADBAC or benzalkonium chloride), has been examined for its antimicrobial performance and coating stability in aqueous environments. Initial column studies examining the porous media's ability to reduce bacterial loads in heating, ventilation, and air conditioning (HVAC) water found average reductions of 94% from pre-flush levels (10⁶ colony forming unit (CFU)/mL) when assessed with R2A spread plates and 83% reductions with SimPlates. There was no observed statistical difference between the average of pre- and post-flush waters from four tests of the media without ADBAC. Taxonomic identification, by 16S rRNA gene sequencing, of colonies drawn from pre- and post-ABDAC R2A plates showed similarities with taxa observed in high frequency from prior cultivation-independent surveys of other cooling tower systems. With this proof of concept, two versions of the media were evaluated for potential coating components released during aqueous exposure. Neither released measurable volatile organic compounds (VOC) components, but one did release bisphenol A and ABDAC compounds. Subsequent column tests of the more durable coating were conducted using cultures of interest in industrial water and demonstrated significant reductions in neutralized post-column Enterococcus faecalis samples and near complete loss of Legionella pneumophila in non-neutralized fluids, but lower reductions in Pseudomonas aeruginosa.

Transcriptome and computational approaches highlighting the molecular regulation of Zacco platypus induced by mesocosm exposure to common disinfectant chlorine

Chlorine (Cl₂) is a disinfectant often used in swimming pools and water treatment facilities. However, it is released into aquatic ecosystems, where it may harm non-targeted organisms. Here, we performed a mesocosm experiment exposing Zacco platypus (Z. platypus) to biocide Cl₂ for 30 days (30 d) at two days' time points 15 days (15 d) and 30 d samples were collected. Here, Z. platypus was exposed to a sublethal concentration (0.1 mg/L) of Cl₂, and comparative transcriptomics analyses were performed to determine their response mechanisms at the molecular level. According to RNA sequencing of the whole-body transcriptome, 860 and 1189 differentially expressed genes (DEGs) were identified from the 15 d and 30 d responses to Cl₂, respectively. After enrichment analysis of GO (Gene Ontology) functions and KEGG (Kyoto Encyclopedia of Genes and Genomes) pathways, identified DEGs were demonstrated to be associated with a variety of functions, including "ion binding and transmembrane transporters". Cl₂ also induced oxidative stress in Z. platypus by increasing the levels of reactive oxygen species (ROS) while decreasing the catalase (CAT) content and the levels of solute carrier family 22 member 11 (slc22a11), Caspase-8 (casp-8), inducible nitric oxide synthase (NOS2), cytosolic phospholipase A2 gamma (PLA2G4). However, Z. platypus still allows recovery during stress suspension by increasing the expression levels of solute carrier family proteins. The GO and KEGG annotation results revealed that the expression of DEGs were related to the detoxification process, immune response, and antioxidant mechanism. Additionally, protein-protein interaction networks (PPI) and cytoHubba analyses identified sixteen hub genes and their interaction. These findings elucidate the regulation of various DEGs and signaling pathways in response to Cl₂ exposure, which will improve our knowledge and laid foundation for further investigation of the toxicity of Cl₂ to Z. platypus.

The fate and behavior mechanism of antibiotic resistance genes and microbial communities in flocs, aerobic granular and biofilm sludge under chloroxylenol pressure

Chloroxylenol (PCMX), an antibacterial agent, has been widely detected in water environment and has toxic effects on biology and ecology. During 270 d, the influence of PCMX on the performance of three nitrification systems was investigated, including floc-based sequencing batch reactor (FSBR), aerobic granule-based SBR (AGSBR) and biofilm SBR (BSBR). The nitrification capability of three systems was inhibited by PCMX, but recovered after domestication, and PCMX made three systems realize partial nitrification for 10, 100 and 35 days, respectively. The extracellular polymeric substances of three systems increased first and then decreased with the increment of PCMX. The granular structure of AGSBR may be conducive to the enrichment of antibiotic resistance genes (ARGs), and almost all ARGs of BSBR were reduced during the addition of 5.0 mg/L PCMX. The microbial community results showed that Rhodococcus as potential degrading bacteria was continuously enriched in three systems. Piscinibacter was regarded as the potential antibiotic resistant bacteria, which was positively associated with multiple ARGs in three systems. Additionally, quaternary ammonium compounds resistance genes had a variety of positive correlations with bacteria in three systems. This study provided a new perspective for the usage and treatment of PCMX.

A sequential utilization of the UV-A (365 nm) fluence rate for disinfection of water, contaminated with Legionella pneumophila and Legionelladumoffii

Legionella species are the etiological agent of Legionnaires' disease, a pathology easily contracted from water circuits and by the inhalation of aerosol droplets. This bacterium mainly proliferates in water: Legionella pneumophila is the most commonly isolated specie in water environments and consequently in water system, although further Legionella species have frequently been isolated, including Legionella dumoffii. The simultaneous presence of the two species in the water system can therefore lead to the simultaneous infection of several people, giving rise to harmful outbreaks. Ultraviolet inactivation of waterborne microorganisms offers a rapid and effective treatment technique and recently is getting more attention mostly to eliminate unsafe level of contamination. To tackle the issue, the inactivation of the two species of Legionella spp., namely L. pneumophila and L. dumoffii, by means of UV-A light emitting diodes (UV-A LED) system is explored. We used a commercially available UV-A LED at 365 nm wavelength, and the UV-A dose is given incrementally to the Legionellae with a concentration of 106 CFU/mL in 0.9% NaCl (aq) solution. In this study, with a UV-A-dose of 1700 mJ/cm2, the log-reduction of 3-log (99.9% inactivation) for L. pneumophila and 2.1-log (99.1% inactivation) for L. dumoffii of the contaminated water are achieved. The Electrical Energy per Order (EEO) is evaluated and showed this system is more economic and efficient in comparison with UV-C and UV-B LEDs. Following the support of this preliminary study with additional tests, aiming to validate the technology, we expect this device may be installed in water plants such as cooling systems or any water purification station in either industrial or home scales to reduce the risk of this infectious disease, preventing consumers' health.

Potential environmental and health risk when returning to normal amidst COVID-19 vaccination

Due to the SARS-CoV-2 pandemic and restricted occupancy in work and school settings, there is a heightened risk for Legionella infection. An increase of stagnation in water pipe systems with limited water usage stimulates biofilm build-up, further facilitating Legionella proliferation. Individuals can inhale infected water aerosols and develop Legionellosis that can progress into mild flu-like symptoms or severe pneumonia. While SARS-CoV-2 vaccinations have been introduced globally, there is a concern for bacterial coinfections as individuals resume normal activities. Even with new SARS-CoV-2 variants circulating, Legionella persists as a public health threat as vulnerable communities' restrictions fluctuate. Proper water monitoring and management are critical while reopening communities. This article features Legionella characteristics and novel case reports amidst the pandemic. This article encourages greater awareness for building managers to minimize water stagnancy by disinfecting water distribution systems and promotes healthcare professionals to properly diagnose other illnesses during the ongoing pandemic to reduce morbidity and mortality.

Knowledge to Predict Pathogens: Legionella pneumophila Lifecycle Systematic Review Part II Growth within and Egress from a Host Cell

Legionella pneumophila (L. pneumophila) is a pathogenic bacterium of increasing concern, due to its ability to cause a severe pneumonia, Legionnaires' Disease (LD), and the challenges in controlling the bacteria within premise plumbing systems. L. pneumophila can thrive within the biofilm of premise plumbing systems, utilizing protozoan hosts for protection from environmental stressors and to increase its growth rate, which increases the bacteria's infectivity to human host cells. Typical disinfectant techniques have proven to be inadequate in controlling L. pneumophila in the premise plumbing system, exposing users to LD risks. As the bacteria have limited infectivity to human macrophages without replicating within a host protozoan cell, the replication within, and egress from, a protozoan host cell is an integral part of the bacteria's lifecycle. While there is a great deal of information regarding how L. pneumophila interacts with protozoa, the ability to use this data in a model to attempt to predict a concentration of L. pneumophila in a water system is not known. This systematic review summarizes the information in the literature regarding L. pneumophila's growth within and egress from the host cell, summarizes the genes which affect these processes, and calculates how oxidative stress can downregulate those genes.

A review of legionnaires' disease and public water systems - Scientific considerations, uncertainties and recommendations

Legionella is an opportunistic premise plumbing pathogen and causative agent of a severe pneumonia called Legionnaires' Disease (LD). Cases of LD have been on the rise in the U.S. and globally. Although Legionella was first identified 45 years ago, it remains an 'emerging pathogen." Legionella is part of the normal ecology of a public water system and is frequently detected in regulatory-compliant drinking water. Drinking water utilities, regulators and public health alike are increasingly required to have a productive understanding of the evolving issues and complex discussions of the contribution of the public water utility to Legionella exposure and LD risk. This review provides a brief overview of scientific considerations important for understanding this complex topic, a review of findings from investigations of public water and LD, including data gaps, and recommendations for professionals interested in investigating public water utilities. Although the current literature is inconclusive in identifying a public water utility as a sole source of an LD outbreak, the evidence is clear that minimizing growth of Legionella in public water utilities through proper maintenance and sustained disinfectant residuals, throughout all sections of the water utility, will lead to a less conducive environment for growth of the bacteria in the system and the buildings they serve.

Legionella: A Promising Supplementary Indicator of Microbial Drinking Water Quality in Municipal Engineered Water Systems

Opportunistic pathogens (OPs) are natural inhabitants and the predominant disease causative biotic agents in municipal engineered water systems (EWSs). In EWSs, OPs occur at high frequencies and concentrations, cause drinking-water-related disease outbreaks, and are a major factor threatening public health. Therefore, the prevalence of OPs in EWSs represents microbial drinking water quality. Closely or routinely monitoring the dynamics of OPs in municipal EWSs is thus critical to ensuring drinking water quality and protecting public health. Monitoring the dynamics of conventional (fecal) indicators (e.g., total coliforms, fecal coliforms, and Escherichia coli) is the customary or even exclusive means of assessing microbial drinking water quality. However, those indicators infer only fecal contamination due to treatment (e.g., disinfection within water utilities) failure and EWS infrastructure issues (e.g., water main breaks and infiltration), whereas OPs are not contaminants in drinking water. In addition, those indicators appear in EWSs at low concentrations (often absent in well-maintained EWSs) and are uncorrelated with OPs. For instance, conventional indicators decay, while OPs regrow with increasing hydraulic residence time. As a result, conventional indicators are poor indicators of OPs (the major aspect of microbial drinking water quality) in EWSs. An additional or supplementary indicator that can well infer the prevalence of OPs in EWSs is highly needed. This systematic review argues that Legionella as a dominant OP-containing genus and natural inhabitant in EWSs is a promising candidate for such a supplementary indicator. Through comprehensively comparing the behavior (i.e., occurrence, growth and regrowth, spatiotemporal variations in concentrations, resistance to disinfectant residuals, and responses to physicochemical water quality parameters) of major OPs (e.g., Legionella especially L. pneumophila, Mycobacterium, and Pseudomonas especially P. aeruginosa), this review proves that Legionella is a promising supplementary indicator for the prevalence of OPs in EWSs while other OPs lack this indication feature. Legionella as a dominant natural inhabitant in EWSs occurs frequently, has a high concentration, and correlates with more microbial and physicochemical water quality parameters than other common OPs. Legionella and OPs in EWSs share multiple key features such as high disinfectant resistance, biofilm formation, proliferation within amoebae, and significant spatiotemporal variations in concentrations. Therefore, the presence and concentration of Legionella well indicate the presence and concentrations of OPs (especially L. pneumophila) and microbial drinking water quality in EWSs. In addition, Legionella concentration indicates the efficacies of disinfectant residuals in EWSs. Furthermore, with the development of modern Legionella quantification methods (especially quantitative polymerase chain reactions), monitoring Legionella in ESWs is becoming easier, more affordable, and less labor-intensive. Those features make Legionella a proper supplementary indicator for microbial drinking water quality (especially the prevalence of OPs) in EWSs. Water authorities may use Legionella and conventional indicators in combination to more comprehensively assess microbial drinking water quality in municipal EWSs. Future work should further explore the indication role of Legionella in EWSs and propose drinking water Legionella concentration limits that indicate serious public health effects and require enhanced treatment (e.g., booster disinfection).

Role of biofilms in the survival of Legionella pneumophila to sodium chloride treatment

Background and Objectives

Legionnaires' disease continues to be a public health concern. Colonized water distribution systems are often implicated in Legionella transmission, despite the use of various disinfection strategies, the bacterium is capable to persist and survive in water systems. The aim of this study was to investigate the persistence of Legionella pneumophila to sodium chloride over time at different temperatures and analysing the role of biofilms in the survival of this bacteria.

Materials and Methods

L. pneumophila serogroup 1 and L. pneumophila serogroup 2-15 were used to study the effect of sodium chloride on planktonic and sessile cells. The tested concentrations were: 0.5%, 1%, 2%, 3%, 4%, 6% and 8% (W/V) NaCl. Biofilms were grown on 24-well microplates.

Results

At 20°C, L. pneumophila planktonic cells were able to survive in sodium chloride concentrations up to 2%. However, at 37°C, a sodium chloride concentration over 1.5%, reduced systematically the numbers of bacterial cells. Biofilms were grown for 20 days in the absence and presence of sodium chloride. The results show that bacterial strains were able to survive and regrow after the sodium chloride shock (2-3%). Moreover, it seems that this effect is less expressed with the age of the biofilm; old biofilms were more persistent than the young ones.

Conclusion

Results from this study demonstrate that the sodium chloride disinfection strategy was effective on Legionella pneumophila planktonic cells but not on biofilms, which demonstrate the role of biofilms in the persistence and recolonization of L. pneumophila in water distribution systems.

Polyguanidine-modified adsorbent to enhance marine applicability for uranium recovery from seawater

The marine applicability of adsorbents intended for recovering uranium from seawater is crucial. For such applicability, the materials must exhibit anti-biofouling properties, seawater pH adaptability (pH~8), and salt tolerance. Extracting uranium from seawater is a long-term project; hence, biofouling, high salt concentrations, and weak alkaline environments negatively affect the adsorption of uranium and damage the recovered materials. Most studies on the extraction of uranium from seawater focus on increasing the adsorption capacity of the employed adsorbent, while its marine applicability is neglected. In the present study, three types of guanidine polymer (GP)-modified acrylic fibers were prepared to investigate the impact of the introduced structure on the marine applicability of the fibers. After screening, the introduction of polyhexamethylene biguanidine (PHMB) is observed to produce PAO-PHMB-A, characterized by excellent marine applicability. The enhanced properties include high antimicrobial activity (10⁹ CFU/mL, 99.71%), good salt tolerance, and optimal adsorption at a pH of 8. Owing to the synergistic effect of its functional groups, the PAO-PHMB-A material exhibits excellent adsorption performance (525.89 mg/g), as well as high selectivity and durability. More importantly, long-term marine tests revealed that PAO-PHMB-A shows a remarkable uranium adsorption capacity (30 d, 3.19 mg/g) and excellent antibacterial activity. Considering its excellent marine applicability and good adsorption performance, the PAO-PHMB-A material developed in this work could serve as a potential adsorbent for engineering applications associated with uranium recovery from seawater.

A study to investigate the impact of two commonly used neutralizing agents in water sampling bottles on legionella & pseudomonas bacteria recovery

BACKGROUND

Microbiological monitoring may be indicated by the local risk assessment of hospital water systems. When water sampling is carried out, it is imperative the activity of any residual biocide is completely neutralised. Sodium thiosulphate pentahydrate (Na₂S₂O₃·5H₂O) is commonly used to neutralize oxidizing biocides in water samples for microbiological testing. Ethylenediaminetetraacetic acid dihydrate (Na₂EDTA.2H₂O) is recommended to neutralize silver copper ionisation treated water samples. However, there are inconsistencies in the recommended effective concentration. Furthermore, sampling bottles dosed with Na₂EDTA.2H₂O are not commercially available.

AIM

To investigate the efficacy of Na₂EDTA.2H₂O as a neutralising agent compared with sodium thiosulphate (Na₂S₂O₃·5H₂O) on water samples treated with silver and copper ions and to assess the biocidal activity in water samples.

METHOD

An interlaboratory investigation was carried out using simulated water samples spiked with Legionella pneumophila or Pseudomonas aeruginosa with and without silver and copper ions. Bacterial recovery was determined in sterile sampling bottles dosed with either 50 mg/L Na₂EDTA.2H₂O or 180 mg/L Na₂S₂O₃·5H₂O as the chemical biocide neutralizing agent.

FINDINGS

Na₂S₂O₃·5H₂O effectively complexed both silver and copper ions and inhibited biocidal activity. The 50 mg/L of Na₂EDTA.2H₂O continued to demonstrate significant biocidal activity in the spiked samples.

CONCLUSION

This study demonstrated that Na₂EDTA.2H₂O is not an efficacious neutralising agent on water samples treated with silver and copper ions. Sample bottles dosed with 180 mg/L Na₂S₂O₃·5H₂O was more effective in neutralising silver and copper ions generated in water that has been treated by silver/copper ionisation systems.

Inactivation of waterborne fungal spores by 1-bromo-3-chloro-5,5-dimethylhydantoin: Kinetics, influencing factors and mechanisms

Fungal contamination in drinking water source has become a problem worth studying, as waterborne fungi may cause deterioration of water quality and outbreak of diseases. Various disinfection methods have been explored to control fungal spores in drinking water, such as chlor(am)ination, ozonation, chlorine dioxide treatment, but these methods are not appropriate for remote areas, owing to the difficulties in preparation, carriage and storage. In this study, a powdery disinfectant of 1-bromo-3-chloro-5,5-dimethylhydantoin (BCDMH), which facilitated transportation and preservation, was firstly chosen to inactivate opportunistic pathogens of Aspergillus niger (A. niger) and Penicillium polonicum (P. polonicum). The results revealed that the inactivation kinetics of fungal spores by BCDMH fitted to Chick-Watson model well, with the inactivation rate constant of 0.011 and 0.034 L mg^-1 min^-1 for A. niger and P. polonicum, respectively. Acidic condition and high temperature promoted the inactivation by BCDMH. Compared with chlorine, BCDMH showed relative weaker ability on inactivation of fungal spores. However, it was demonstrated that the inactivation efficiency of BCDMH was obviously enhanced by adding halide ions, with 11 or 36 folds for A. niger and 4 or 15 folds for P. polonicum by adding 40 μM Br^- or I^-. The inactivation mechanisms were detected by flow cytometry and scanning electron microscope. Fungal spores lost their culturability firstly, then membrane integrity was damaged. Meanwhile, the esterase activity and intracellular reactive oxygen species level changed, and finally intracellular adenosine triphosphate released.

Enhancement of UV disinfection of urine matrixes by electrochemical oxidation

This work focuses on the removal of antibiotic-resistant bacteria (ARB) contained in hospital urines by UV disinfection enhanced by electrochemical oxidation to overcome the limitations of both single processes in the disinfection of this type of effluents. UV disinfection, electrolysis, and photoelectrolysis of synthetic hospital urine intensified with K. pneumoniae were studied. The influence of the current density and the anode material was assessed on the disinfection performance of combined processes and the resulting synergies and/or antagonisms of coupling both technologies were also evaluated. Results show that the population of bacteria contained in hospital urine is only reduced by 3 orders of magnitude during UV disinfection. Electrolysis leads to complete disinfection of hospital urine when working at 50 A m^-2 using Boron Doped Diamond (BDD) and Mixed Metal Oxides (MMO) as anodes. The coupling of electrolysis to the UV disinfection process leads to the highest disinfection rates, attaining a complete removal of ARB for all the current densities and anode materials tested. The use of MMO anodes leads to higher synergies than BDD electrodes. Results confirm that UV disinfection can be enhanced by electrolysis for the removal of ARB in urine, considering both technical and economic aspects.

Causes, Factors, and Control Measures of Opportunistic Premise Plumbing Pathogens—A Critical Review

This review critically analyses the chemical and physical parameters that influence the occurrence of opportunistic pathogens in the drinking water distribution system, specifically in premise plumbing. A comprehensive literature review reveals significant impacts of water age, disinfectant residual (type and concentration), temperature, pH, and pipe materials. Evidence suggests that there is substantial interplay between these parameters; however, the dynamics of such relationships is yet to be elucidated. There is a correlation between premise plumbing system characteristics, including those featuring water and energy conservation measures, and increased water quality issues and public health concerns. Other interconnected issues exacerbated by high water age, such as disinfectant decay and reduced corrosion control efficiency, deserve closer attention. Some common features and trends in the occurrence of opportunistic pathogens have been identified through a thorough analysis of the available literature. It is proposed that the efforts to reduce or eliminate their incidence might best focus on these common features.

Disinfection characteristics of an advanced rotational hydrodynamic cavitation reactor in pilot scale

Hydrodynamic cavitation is a promising technique for water disinfection. In the present paper, the disinfection characteristics of an advanced hydrodynamic cavitation reactor (ARHCR) in pilot scale were studied. The effects of various flow rates (1.4-2.6 m³/h) and rotational speeds (2600-4200 rpm) on the removal of Escherichia coli (E. coli) were revealed and analyzed. The variation regularities of the log reduction and reaction rate constant at various cavitation numbers were established. A disinfection rate of 100% was achieved in only 4 min for 15 L of simulated effluent under 4200 rpm and 1.4 m³/h, with energy efficiency at 0.0499 kWh/L. A comprehensive comparison with previously introduced HCRs demonstrates the superior performance of the presented ARHCR system. The morphological changes in E. coli were studied by scanning electron microscopy. The results indicate that the ARHCR can lead to serious cleavage and surface damages to E. coli, which cannot be obtained by conventional HCRs. Finally, a possible damage mechanism of the ARHCR, including both the hydrodynamical and sonochemical effects, was proposed. The findings of the present study can provide strong support to the fundamental understanding and applications of ARHCRs for water disinfection.

Dynamic modelling of Legionella pneumophila thermal inactivation in water

A predictive mathematical model describing the effect of temperature on the inactivation of Legionella pneumophila in water was developed. Thermal inactivation of L. pneumophila was monitored under isothermal conditions (51 - 61°C). A primary log-linear model was fitted to the inactivation data and the estimated D values ranged from 0.23 to 25.31 min for water temperatures from 61 to 51°C, respectively. The effect of temperature on L. pneumophila inactivation was described using a secondary model, and the model parameters z value and D_ref (D-value at 55°C) were estimated at 5.54°C and 3.47 min, respectively. The developed model was further validated under dynamic temperature conditions mimicking various conditions of water thermal disinfection in plumbing systems. The results indicated that the model can satisfactorily predict thermal inactivation of the pathogen at dynamic temperature environments and effectively translate water temperature profiles to cell number reduction. The application of the model in combination with effective temperature monitoring could provide the basis of an integrated preventive approach for the effective control of L. pneumophila in plumbing systems.

Biosafety during a pandemic: shared resource laboratories rise to the challenge

Biosafety has always been an important aspect of daily work in any research institution, particularly for cytometry Shared Resources Laboratories (SRLs). SRLs are common‐use spaces that facilitate the sharing of knowledge, expertise, and ideas. This sharing inescapably involves contact and interaction of all those within this working environment on a daily basis. The current pandemic caused by SARS‐CoV‐2 has prompted the re‐evaluation of many policies governing the operations of SRLs. Here we identify and review the unique challenges SRLs face in maintaining biosafety standards, highlighting the potential risks associated with not only cytometry instrumentation and samples, but also the people working with them. We propose possible solutions to safety issues raised by the COVID‐19 pandemic and provide tools for facilities to adapt to evolving guidelines and future challenges.

The Impact of Storms on Legionella pneumophila in Cooling Tower Water, Implications for Human Health

At the U.S. Department of Energy’s Savannah River Site (SRS) in Aiken, SC, cooling tower water is routinely monitored for Legionella pneumophila concentrations using a direct fluorescent antibody (DFA) technique. Historically, 25–30 operating SRS cooling towers have varying concentrations of Legionella in all seasons of the year, with patterns that are unpredictable. Legionellosis, or Legionnaires’ disease (LD), is a pneumonia caused by Legionella bacteria that thrive both in man-made water distribution systems and natural surface waters including lakes, streams, and wet soil. Legionnaires’ disease is typically contracted by inhaling L. pneumophila, most often in aerosolized mists that contain the bacteria. At the SRS, L. pneumophila is typically found in cooling towers ranging from non-detectable up to 10⁸ cells/L in cooling tower water systems. Extreme weather conditions contributed to elevations in L. pneumophila to 10⁷–10⁸ cells/L in SRS cooling tower water systems in July–August 2017. L. pneumophila concentrations in Cooling Tower 785-A/2A located in SRS A-Area, stayed in the 10⁸ cells/L range despite biocide addition. During this time, other SRS cooling towers did not demonstrate this L. pneumophila increase. No significant difference was observed in the mean L. pneumophila mean concentrations for the towers (p < 0.05). There was a significant variance observed in the 285-2A/A Tower L. pneumophila results (p < 0.05). Looking to see if we could find “effects” led to model development by analyzing 13 months of water chemistry and microbial data for the main factors influencing the L. pneumophila concentrations in five cooling towers for this year. It indicated chlorine and dissolved oxygen had a significant impact (p < 0.0002) on cooling tower 785A/2A. Thus, while the variation in the log count data for the A-area tower is statistically greater than that of the other four towers, the average of the log count data for the A-Area tower was in line with that of the other towers. It was also observed that the location of 785A/2A and basin resulted in more debris entering the system during storm events. Our results suggest that future analyses should evaluate the impact of environmental conditions and cooling tower design on L. pneumophila water concentrations and human health.

Critical Review: Propensity of Premise Plumbing Pipe Materials to Enhance or Diminish Growth of Legionella and Other Opportunistic Pathogens

Growth of Legionella pneumophila and other opportunistic pathogens (OPs) in drinking water premise plumbing poses an increasing public health concern. Premise plumbing is constructed of a variety of materials, creating complex environments that vary chemically, microbiologically, spatially, and temporally in a manner likely to influence survival and growth of OPs. Here we systematically review the literature to critically examine the varied effects of common metallic (copper, iron) and plastic (PVC, cross-linked polyethylene (PEX)) pipe materials on factors influencing OP growth in drinking water, including nutrient availability, disinfectant levels, and the composition of the broader microbiome. Plastic pipes can leach organic carbon, but demonstrate a lower disinfectant demand and fewer water chemistry interactions. Iron pipes may provide OPs with nutrients directly or indirectly, exhibiting a high disinfectant demand and potential to form scales with high surface areas suitable for biofilm colonization. While copper pipes are known for their antimicrobial properties, evidence of their efficacy for OP control is inconsistent. Under some circumstances, copper's interactions with premise plumbing water chemistry and resident microbes can encourage growth of OPs. Plumbing design, configuration, and operation can be manipulated to control such interactions and health outcomes. Influences of pipe materials on OP physiology should also be considered, including the possibility of influencing virulence and antibiotic resistance. In conclusion, all known pipe materials have a potential to either stimulate or inhibit OP growth, depending on the circumstances. This review delineates some of these circumstances and informs future research and guidance towards effective deployment of pipe materials for control of OPs.

Roadblocks to Low Temperature District Heating

Energy usage in buildings is coming increasingly under the spotlight as carbon policy focus shifts towards the utilization of thermal energy. In the UK, heating and hot water accounts for around 40% of energy consumption and 20% of greenhouse gas emissions. Heating is typically produced onsite, making widescale carbon or energetic improvements challenging. District heating networks (DHNs) can offer significant carbon reduction for many users but can only be implemented if the end user buildings have good thermal energy efficiency. This greatly limits the ability to implement advancing 4th and 5th generation DHNs, which are the most advanced systems available. We elucidate the current state of thermal efficiency in buildings in the UK and provide recommendations for necessary building requirements and modifications in order to accommodate 4th and 5th generation district heating. We conclude that key sectors must be addressed including creating a skilled workforce, producing relevant metrics and benchmarks, and providing financial support for early stage design exploration.

A review on hydrodynamic cavitation disinfection: The current state of knowledge

Disinfection, which aims to eliminate pathogenic microorganisms, is an essential step of water treatment. Hydrodynamic cavitation (HC) has emerged as a promising technology for large-scale disinfection without introducing new chemicals. HC, which can effectively induce sonochemistry by mechanical means, creates extraordinary conditions of pressures of ~1000 bar, local hotspots with ~5000 K, and high oxidation (hydroxyl radicals) in room environment. These conditions can produce highly destructive effects on microorganisms in water. In addition, the enhancements of chemical reactions and mass transfers by HC produce the synergism between HC and disinfectants or other physical treatment methods. HC is generated by hydrodynamic cavitation reactors (HCRs), therefore, their performance basically determines the effectiveness, economical efficiency, and applicability of HC disinfection. Therefore, developing high-performance HCRs and revealing the corresponding disinfection mechanisms are the most crucial issues today. In this review, we summarize the fundamental principles of HC and HCRs and recent development in HC disinfection. The energy release from cavitation phenomenon and corresponding mechanisms are elaborated. The performance (effectiveness, treatment ratio, and cost) of various HCRs, effects of treatment conditions on performance, and applicability of HC disinfection are evaluated and discussed. Finally, recommendations are provided for the future progress based on the analysis of previous studies.

Acute Toxicity of Hydrogel Polyhexamethylene Guanidine Hydrochloride

Background. Previously, we have shown that the polyhexamethylene guanidine hydrochloride hydrogel exhibits a pronounced wound healing. At the same time, no studies of the toxic effect of the hydrogel on animals have been conducted. Aim of the research. In the framework of this work, the acute toxicity of the hydrogel polyhexamethylene guanidine hydrochloride was studied in laboratory animals with intragastric administration. Materials and methods. The polyhexamethylene guanidine hydrochloride hydrogel was obtained by crosslinking the amino end groups with formaldehyde. An acute toxicity study was carried out (P 1.2.3156-13, GOST 32644-2014 and the Guidelines for conducting preclinical studies of drugs) in an experiment on outbred mice with a single addition of the test substance in different doses (1000, 3000, 5000, 8000 mg/kg) with fixing indicators (appearance, behavior, condition of the body hair coat, water and food consumption, excretion, body weight and its growth) during 14 days. After the animals were withdrawn from the experiment, autopsy, macroscopic evaluation and weighing of the internal organs were performed. The results showed that with the introduction of the test substance into the animal organism, death during the observation period (14 days) did not occur. It was not possible to determine the semi-lethal dose for the test compound. Conclusion. The conducted studies allow us to conclude that this substance is practically non-toxic and can be classified as hazard class V. Further research will be directed to the formation of hydrogel compositions with medicinal substances.

Interactive Effects of Copper Pipe, Stagnation, Corrosion Control, and Disinfectant Residual Influenced Reduction of Legionella pneumophila during Simulations of the Flint Water Crisis

Flint, MI experienced two outbreaks of Legionnaires' Disease (LD) during the summers of 2014 and 2015, coinciding with use of Flint River as a drinking water source without corrosion control. Using simulated distribution systems (SDSs) followed by stagnant simulated premise (i.e., building) plumbing reactors (SPPRs) containing cross-linked polyethylene (PEX) or copper pipe, we reproduced trends in water chemistry and Legionella proliferation observed in the field when Flint River versus Detroit water were used before, during, and after the outbreak. Specifically, due to high chlorine demand in the SDSs, SPPRs with treated Flint River water were chlorine deficient and had elevated L. pneumophila numbers in the PEX condition. SPPRs with Detroit water, which had lower chlorine demand and higher residual chlorine, lost all culturable L. pneumophila within two months. L. pneumophila also diminished more rapidly with time in Flint River SPPRs with copper pipe, presumably due to the bacteriostatic properties of elevated copper concentrations caused by lack of corrosion control and stagnation. This study confirms hypothesized mechanisms by which the switch in water chemistry, pipe materials, and different flow patterns in Flint premise plumbing may have contributed to observed LD outbreak patterns.

Properties of Polyhexamethylene Guanidine (PHMG) Associated with Fatal Lung Injury in Korea

The use of humidifier disinfectant (HD) has been determined to be associated with lung injuries (HDLI) in Korea. Although HD brands containing polyhexamethylene guanidine (PHMG) oligomers have been found to cause more HDLI compared to brands containing other disinfectants, the physicochemical properties of PHMG have been poorly defined. We aimed to quantify the PHMG dissolved in HD brands, characterize the number-average (Mn) and weight-average (Mw) molecular masses, and identify the polymerization degree of PHMG. Analysis of the PHMG oligomers was performed using a matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI-TOF MS) operated in positive-ion reflectron mode. Eight brands of HD containing PHMG were identified. The PHMG concentrations in these brands ranged from 160 to 37,200 ppm (mean = 3100.9 ppm). Concentration was a significant variable among and within HD brands. The degree of PHMG oligomerization fell within the range of two to four. The averages of Mn and Mw were 517.2 g/mol (range: 422-613 g/mol) and 537.3 g/mol (range: 441.0-678.0 g/mol), respectively. Based on the average molecular weight and the degree of polymerization, the PHMG examined here could be regarded as oligomers, which may be associated with the highest proportion of HDLI being caused by PHMG.

Effects of temperature and fluid velocity on beer pasteurization in open and closed loop heating systems: numerical modeling and simulation

A two-dimensional symmetric heat transfer model and a fluid rotation model were established to study beer pasteurization process through the COMSOL Multiphysics software. Two heating modes, including closed-loop heating (CLH) and open-loop heating (OLH), were considered. There was a significant natural convection phenomenon in both heating systems. However, the natural convection became weaker with a gradual increase in the heating temperature of the beer. The maximum fluid velocity (FV) in CLH and OLH modes was 69.34 and 43.74 mm/s, respectively. After heating at 333.13 K for 20 min, the minimum and maximum pasteurization unit (PU) values in CLH were 55 and 59, respectively, while the corresponding values for OLH were 30 and 55, respectively. The pasteurization effect under the CLH mode was better than the OLH one. The heat transfer was also affected by fluid flow (laminar and turbulence) patterns. The PU value was nonlinearly related to the FV. The optimal FV can be obtained at ∼50 mm/s.

Prevention of nosocomial legionellosis by best water management: comparison of three decontamination methods

BACKGROUND

Since 2000, the National Health System has adopted international guidelines for assessing Legionella spp. in hospital water systems. The control of water contamination by Legionella spp. is still a matter of research concerning the most effective method in preventing nosocomial infections.

AIM

To compare three different decontamination methods by monitoring colony-forming unit count and number of hospital-acquired legionellosis cases. A secondary objective was to evaluate the long-term effects of the preventive measures on the water pipes.

METHODS

A protocol was developed for the selection of high-risk sampling sites and for the testing of three disinfection methods over the course of 19 years: hyperchlorination and thermal shock (period A, 2000-2005); copper-silver ionization (period B, 2006-2010); and integration of pre-filtering, filtering, pipe-protecting products, and remote control with chlorine dioxide (ClO₂) (period C, 2011-2018).

FINDINGS

The use of shock disinfection and hyperchlorination led to a decrease in contamination level immediately after the procedure, but then it rose again to the previous level in two months. Both copper-silver ionization and ClO₂ disinfection showed a stable and durable decrease in contamination level. Throughout these three phases, six cases of Legionella spp. occurred during period A, six cases during period B, and three cases during period C. With regard to the damage of water pipes, effective copper-silver levels caused corrosion and calcification in water pipes.

CONCLUSION

Both copper-silver ionization and ClO₂ properly controlled Legionella spp. contamination. ClO₂ significantly reduced the number of positive sites (P < 0.001) without damaging the pipelines.

Applications of Light-Emitting Diodes (LEDs) in Food Processing and Water Treatment

Light-emitting diode (LED) technology is an emerging nonthermal food processing technique that utilizes light energy with wavelengths ranging from 200 to 780 nm. Inactivation of bacteria, viruses, and fungi in water by LED treatment has been studied extensively. LED technology has also shown antimicrobial efficacy in food systems. This review provides an overview of recent studies of LED decontamination of water and food. LEDs produce an antibacterial effect by photodynamic inactivation due to photosensitization of light absorbing compounds in the presence of oxygen and DNA damage; however, such inactivation is dependent on the wavelength of light energy used. Commercial applications of LED treatment include air ventilation systems in office spaces, curing, medical applications, water treatment, and algaculture. As low penetration depth and high-intensity usage can challenge optimal LED treatment, optimization studies are required to select the right light wavelength for the application and to standardize measurements of light energy dosage.

Is It Possible to Measure Monobromamine Using Colorimetric Methods Based on the Berthelot Reaction, Like for Monochloramine?

Analytical methods based on the Berthelot reaction were recently adapted for determining monochloramine (MCA: NH2Cl) in freshwater. The specificity of the Berthelot reaction with regard to MCA is related to the need for two exchangeable hydrogen atoms to form indophenol blue. MCA can thus be distinguished from organic N-chloramines, which have only one exchangeable hydrogen atom. Monobromamine (MBA: NH2Br) may be formed during chlorination of seawater containing ammonium ions. Quantifying MBA is quite challenging and no method has been reported for its specific determination in seawater. As MBA also has two exchangeable hydrogen atoms, its reactivity might be analogous to that of MCA, but this hypothesis has never been investigated. The aim of this study was to examine the applicability of the so-called “indophenol method” for the determination of the MBA in freshwater and seawater samples. The reaction between MBA and Berthelot reagents was studied in both ultrapure water and artificial seawater. The reaction products were characterized by using gas chromatography coupled to mass spectrometry (GC–MS), Fourier transform-ion cyclotron resonance mass spectrometry (FT–ICR MS), and UV–vis spectroscopy. Results showed that colorimetric methods based on the Berthelot reaction were not suitable for measuring MBA in freshwater or seawater, since NH2Br reacts with alkaline phenol derivative via electrophilic substitution to form ortho- and para-brominated phenols instead of forming indophenol.

Legionella pneumophila and Protozoan Hosts: Implications for the Control of Hospital and Potable Water Systems

Legionella pneumophila is an opportunistic waterborne pathogen of public health concern. It is the causative agent of Legionnaires’ disease (LD) and Pontiac fever and is ubiquitous in manufactured water systems, where protozoan hosts and complex microbial communities provide protection from disinfection procedures. This review collates the literature describing interactions between L. pneumophila and protozoan hosts in hospital and municipal potable water distribution systems. The effectiveness of currently available water disinfection protocols to control L. pneumophila and its protozoan hosts is explored. The studies identified in this systematic literature review demonstrated the failure of common disinfection procedures to achieve long term elimination of L. pneumophila and protozoan hosts from potable water. It has been demonstrated that protozoan hosts facilitate the intracellular replication and packaging of viable L. pneumophila in infectious vesicles; whereas, cyst-forming protozoans provide protection from prolonged environmental stress. Disinfection procedures and protozoan hosts also facilitate biogenesis of viable but non-culturable (VBNC) L. pneumophila which have been shown to be highly resistant to many water disinfection protocols. In conclusion, a better understanding of L. pneumophila-protozoan interactions and the structure of complex microbial biofilms is required for the improved management of L. pneumophila and the prevention of LD.

Impact of temperature on Legionella pneumophila, its protozoan host cells, and the microbial diversity of the biofilm community of a pilot cooling tower

Legionella pneumophila is a waterborne bacterium known for causing Legionnaires' Disease, a severe pneumonia. Cooling towers are a major source of outbreaks, since they provide ideal conditions for L. pneumophila growth and produce aerosols. In such systems, L. pneumophila typically grow inside protozoan hosts. Several abiotic factors such as water temperature, pipe material and disinfection regime affect the colonization of cooling towers by L. pneumophila. The local physical and biological factors promoting the growth of L. pneumophila in water systems and its spatial distribution are not well understood. Therefore, we built a lab-scale cooling tower to study the dynamics of L. pneumophila colonization in relationship to the resident microbiota and spatial distribution. The pilot was filled with water from an operating cooling tower harboring low levels of L. pneumophila. It was seeded with Vermamoeba vermiformis, a natural host of L. pneumophila, and then inoculated with L. pneumophila. After 92 days of operation, the pilot was disassembled, the water was collected, and biofilm was extracted from the pipes. The microbiome was studied using 16S rRNA and 18S rRNA genes amplicon sequencing. The communities of the water and of the biofilm were highly dissimilar. The relative abundance of Legionella in water samples reached up to 11% whereas abundance in the biofilm was extremely low (≤0.5%). In contrast, the host cells were mainly present in the biofilm. This suggests that L. pneumophila grows in host cells associated with biofilm and is then released back into the water following host cell lysis. In addition, water temperature shaped the bacterial and eukaryotic community of the biofilm, indicating that different parts of the systems may have different effects on Legionella growth.

Bacteriophage treatment of carbapenemase-producing Klebsiella pneumoniae in a multispecies biofilm: a potential biocontrol strategy for healthcare facilities

The p-traps of hospital handwashing sinks represent a potential reservoir for antimicrobial-resistant organisms of major public health concern, such as carbapenemase-producing KPC+ Klebsiella pneumoniae (CPKP). Bacteriophages have reemerged as potential biocontrol agents, particularly against biofilm-associated, drug-resistant microorganisms. The primary objective of our study was to formulate a phage cocktail capable of targeting a CPKP strain (CAV1016) at different stages of colonization within polymicrobial drinking water biofilms using a CDC biofilm reactor (CBR) p-trap model. A cocktail of four CAV1016 phages, all exhibiting depolymerase activity, were isolated from untreated wastewater using standard methods. Biofilms containing Pseudomonas aeruginosa, Micrococcus luteus, Stenotrophomonas maltophilia, Elizabethkingia anophelis, Cupriavidus metallidurans, and Methylobacterium fujisawaense were established in the CBR p-trap model for a period of 28 d. Subsequently, CAV1016 was inoculated into the p-trap model and monitored over a period of 21 d. Biofilms were treated for 2 h at either 25 °C or 37 °C with the phage cocktail (109 PFU/ml) at 7, 14, and 21 d post-inoculation. The effect of phage treatment on the viability of biofilm-associated CAV1016 was determined by plate count on m-Endo LES agar. Biofilm heterotrophic plate counts (HPC) were determined using R2A agar. Phage titers were determined by plaque assay. Phage treatment reduced biofilm-associated CAV1016 viability by 1 log10 CFU/cm2 (p < 0.05) at 7 and 14 d (37 °C) and 1.4 log10 and 1.6 log10 CFU/cm2 (p < 0.05) at 7 and 14 d, respectively (25 °C). No significant reduction was observed at 21 d post-inoculation. Phage treatment had no significant effect on the biofilm HPCs (p > 0.05) at any time point or temperature. Supplementation with a non-ionic surfactant appears to enhance phage association within biofilms. The results of this study suggest the potential of phages to control CPKP and other carbapenemase-producing organisms associated with microbial biofilms in the healthcare environment.

Biological HRPs in wastewater

Biological high-risk pollutants (HRPs) have become a serious threat to human health worldwide, and wastewater is one of the major sources of them in a natural environment. Despite the long history of wastewater research, comprehensive understanding of the role and behavior of HRPs during wastewater treatment is still limited owing to the complexity of the community. In recent decades, the rapid development of molecular tools, especially the wide application of next generation sequencing technologies, helps to unravel the community composition, structure, and dynamic variation in wastewater. Overall, this chapter mainly focuses on biological HRPs, including bacteria, viruses, protozoa, helminth, biotoxins, antibiotic resistance genes and antibiotic resistant bacteria in wastewater. The characteristics, classification, fates, functions, and health implications of these HRPs are introduced in detail. Moreover, the biogeography of HRPs is a research hotspot in recent years, and available information is also summarized in this chapter. Finally, we also propose the future research needs of HRPs in wastewater after the comprehensive summary of the existing research reports. This chapter is wished to be helpful for beginners to quickly understand the biological HRPs in wastewater.