Oxidation of cellulose under controlled conditions

Preparation of highly stable immobilized Candida antarctica lipase B (CALB) through adjusting the surface properties of carrier: Preparation, characterization and performance evaluation

The stability of the immobilized lipase is the key factor that determines the economy and feasibility of its industrial application. Here, two robust immobilized Candida antarctica lipase B (CALB) were prepared through adjusting the surface properties of ECR1030 resin. Silane coupling agent (SCA) and dialdehyde cellulose (DAC) were employed to modify the carrier surface. Contact angle measurement showed that the hydrophobicity of the modified carrier increased first, and then decreased with the increase of the chain length of SCA. FTIR results showed that Si-O-Si bond and aldehyde group were attached to ECR1030, respectively, indicating that the ECR1030 resin was successfully modified. Meanwhile, the NH and CN bond were observed in the corresponding immobilized CALB, suggesting CALB was immobilized onto the modified carriers. The effects of immobilization conditions on CALB immobilization was further investigated, and the C8-ECR1030-CALB and DAC-ECR1030-CALB with the activity of 12,736 U/g and 11,962 U/g were obtained. Moreover, the stability of the immobilized lipases was evaluated and compared with the commercial Novozym 435. The C8-ECR1030-CALB and DAC-ECR1030-CALB exhibited comparable or superior stability to Novozym 435 and showed better deacidification effect than Novozym 435. This study paves road for further study involving preparation of highly stable immobilized lipase.

Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications

In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.

Schiff Base Functionalized Cellulose: Towards Strong Support-Cobalt Nanoparticles Interactions for High Catalytic Performances

A new hybrid catalyst consisting of cobalt nanoparticles immobilized onto cellulose was developed. The cellulosic matrix is derived from date palm biomass waste, which was oxidized by sodium periodate to yield dialdehyde and was further derivatized by grafting orthoaminophenol as a metal ion complexing agent. The new hybrid catalyst was characterized by FT-IR, solid-state NMR, XRD, SEM, TEM, ICP, and XPS. The catalytic potential of the nanocatalyst was then evaluated in the catalytic hydrogenation of 4-nitrophenol to 4-aminophenol under mild experimental conditions in aqueous medium in the presence of NaBH4 at room temperature. The reaction achieved complete conversion within a short period of 7 min. The rate constant was calculated to be K = 8.7 × 10-3 s-1. The catalyst was recycled for eight cycles. Furthermore, we explored the application of the same catalyst for the hydrogenation of cinnamaldehyde using dihydrogen under different reaction conditions. The results obtained were highly promising, exhibiting both high conversion and excellent selectivity in cinnamyl alcohol.

Kinetics of Periodate-Mediated Oxidation of Cellulose

The oxidation of cellulose to dialdehyde cellulose (DAC) is a process that has received increased interest during recent years. Herein, kinetic modeling of the reaction with sodium periodate as an oxidizing agent was performed to quantify rate-limiting steps and overall kinetics of the cellulose oxidation reaction. Considering a pseudo-first-order reaction, a general rate expression was derived to elucidate the impact of pH, periodate concentration, and temperature on the oxidation of cellulose and concurrent formation of cellulose degradation products. Experimental concentration profiles were utilized to determine the rate constants for the formation of DAC (k1), degradation constant of cellulose (k2), and degradation of DAC (k3), confirming that the oxidation follows a pseudo-first-order reaction. Notably, the increase in temperature has a more pronounced effect on k1 compared to the influence of IO4- concentration. In contrast, k2 and k3 display minimal changes in response to IO4- concentration but increase significantly with increasing temperature. The kinetic model developed may help with understanding the rate-limiting steps and overall kinetics of the cellulose oxidation reaction, providing valuable information for optimizing the process toward a faster reaction with higher yield of the target product.

Thermo-activated periodate oxidation process for tetracycline degradation: Kinetics and byproducts transformation pathways

Periodate-based advanced oxidation processes have been diffusely practiced for pollutant decontamination. However, the thermo-activation of periodate process (heat/PI), an effective water pollution removal process, has been rarely discussed, and the degradation pathway of this heat/PI system requires investigation. In this work, tetracycline antibiotics were selected as the model micropollutant for the comprehensive evaluation of the heat/PI system. The heat/PI system exhibited good performance for tetracycline (TC) remediation with temperature increases. The principal reactive oxidative species in the heat/PI system was confirmed using quenching experiments and electron paramagnetic resonance experiments. Further, the potential reactive sites in the TC were identified based on the density functional theory calculation. Based on the detection results of intermediates, there was no significant difference in byproducts generated during TC degradation under various temperatures in the heat/PI system. The Toxicity Estimation Software Tool (T.E.S.T.) method was applied to calculate the individual toxicity of the byproducts. This study contributes to a comprehensive explanation of the process of the thermal activation of periodate, and in particular, it explains the source of oxidation power, the transformation of byproducts, and the toxicity of reaction systems.

Debugging periodate oxidation of cellulose: Why following the common protocol of quenching excess periodate with glycol is a bad idea

Periodate oxidation of cellulose to produce "dialdehyde cellulose" (DAC) has lately received increasing attention in sustainable materials development. Despite the longstanding research interest and numerous reported studies, there is still an enormous variation in the proposed preparation and work-up protocols. This apparently reduces comparability and causes reproducibility problems in DAC research. Two simple but prevalent work-up protocols, namely glycol quenching and filtration/washing, were critically examined and compared, resulting in this cautionary note. Various analytical techniques were applied to quantify residual iodine species and organic contaminations from quenching side reactions. The commonly practiced glycol addition cannot remove all oxidising iodine compounds. Both glycol and the formed formaldehyde are incorporated into DAC's polymeric structure. Quenching of excess periodate with glycol can thus clearly be discouraged. Instead, simple washing protocols are recommended which do not bear the risk of side reactions with organic contaminants. While simple washing was sufficient for mildly oxidised celluloses, higher oxidised samples were more likely to trap residual (per)iodate, as determined by thiosulfate titration. For work-up, simple washing with water is proposed while determining potential iodine contaminations after washing with a simple colorimetric test and, if needed, removal of residual periodate by washing with an aqueous sodium thiosulfate solution.

The effect of periodate oxidation of basil seed gum and its addition on protein binding

This study attempted to determine the best point of basil seed oxidation by applying response surface methodology (RSM) with 3 factors of temperature (35-45 °C), pH (3-7) as well as time (3-7 h), at 3 levels. The produced dialdehyde basil seed gum (DBSG) was collected and its physicochemical properties were determined. Fitting of quadratic, linear polynomial equations was subsequently done by considering the insignificant lack of fit, as well as highly considerable R², in order to probe the probable relationship existing between these considered variables as well as the obtained responses. So the considered optimal related test conditions, which included pH = 3, T = 45 °C as well as Time = 3 h, were specified to produce the highest percentage of aldehyde (DBSG32), optimal (DBSG34) and the (DBSG74) samples with the highest viscosity. The results obtained by FTIR and aldehyde content determination provided the indication that dialdehyde groups were formed in a way that was in equilibrium with the considered the hemiacetal form which was dominant. Furthermore, AFM investigation related to the considered DBSG34 sample displayed over-oxidation as well as depolymerization; this might be due to the enhanced hydrophobic qualities, as well as the decreased viscosity. While the DBSG34 sample had the most dialdehyde factor group with a particular tendency for the combination having the proteins' amino group, DBSG32 and DBSG74 samples could be desirable for industrial uses owing to no overoxidation.

Construction of a cellulose-based high-performance adhesive with a crosslinking structure bridged by Schiff base and ureido groups

Biomass-based adhesives are considered to be the preferred alternative to formaldehyde-type wood adhesives due to their wide range of sources, low cost, and sustainability. Herein, an environmentally friendly Schiff base cross-linked compact three-dimensional network structure bio-adhesive (DAC-PEI-U) derived from polyethyleneimine (PEI), urea, and cellulose was successfully prepared, verifying by detailed FTIR, NMR, and XPS analysis. Schiff base bridging between aldehyde groups in dialdehyde cellulose (DAC) and amino groups in polyurea (PEIU) not only constructed crosslinking networks but also endowed adhesives with good adhesion property. The dry bond strength of DAC-PEI-U adhesive reached 2.71 MPa, and the wet shear strength was 1.51 MPa (hot water) and 1.34 MPa (boiling water), respectively. It not only improves the water resistance and bonding process, but also displays simple synthesis and low cost. The improved performance of DAC-PEI-U adhesive is attributed to the generation of hyperbranched cross-linking structure in the adhesive system, which results in increased cross-linking density and promotes the formation of dense cross-sections in the curing adhesive. This work paves a solid way for developing cellulose-based wood adhesives with wet bonding properties, thus holding great potential as an alternative to formaldehyde-type adhesives in wood-based panel and indoor panel bonding industries.

Printing Structurally Anisotropic Biocompatible Fibrillar Hydrogel for Guided Cell Alignment

Many fibrous biological tissues exhibit structural anisotropy due to the alignment of fibers in the extracellular matrix. To study the impact of such anisotropy on cell proliferation, orientation, and mobility, it is important to recapitulate and achieve control over the structure of man-made hydrogel scaffolds for cell culture. Here, we report a chemically crosslinked fibrous hydrogel due to the reaction between aldehyde-modified cellulose nanofibers and gelatin. We explored two ways to induce structural anisotropy in this gel by extruding the hydrogel precursor through two different printheads. The cellulose nanofibers in the hydrogel ink underwent shear-induced alignment during extrusion and retained it in the chemically crosslinked hydrogel. The degree of anisotropy was controlled by the ink composition and extrusion flow rate. The structural anisotropy of the hydrogel extruded through a nozzle affected the orientation of human dermal fibroblasts that were either seeded on the hydrogel surface or encapsulated in the extruded hydrogel. The reported straightforward approach to constructing fibrillar hydrogel scaffolds with structural anisotropy can be used in studies of the biological impact of tissue anisotropy.

Immobilization of Interfacial Activated Candida rugosa Lipase Onto Magnetic Chitosan Using Dialdehyde Cellulose as Cross-Linking Agent

Candidarugosa lipase (CRL) was activated with surfactants (sodium dodecyl sulfate [SDS]) and covalently immobilized onto a nanocomposite (Fe₃O₄-CS-DAC) fabricated by combining magnetic nanoparticles Fe₃O₄ with chitosan (CS) using polysaccharide macromolecule dialdehyde cellulose (DAC) as the cross-linking agent. Fourier transform infrared spectroscopy, transmission electron microscope, thermogravimetric analysis, and X-ray diffraction characterizations confirmed that the organic–inorganic nanocomposite support modified by DAC was successfully prepared. Enzymology experiments confirmed that high enzyme loading (60.9 mg/g) and 1.7 times specific enzyme activity could be obtained under the optimal immobilization conditions. The stability and reusability of immobilized CRL (Fe₃O₄-CS-DAC-SDS-CRL) were significantly improved simultaneously. Circular dichroism analysis revealed that the active conformation of immobilized CRL was maintained well. Results demonstrated that the inorganic–organic nanocomposite modified by carbohydrate polymer derivatives could be used as an ideal support for enzyme immobilization.

Bacterial cellulose-based biomaterials: From fabrication to application

Driven by its excellent physical and chemical properties, BC (bacterial cellulose) has achieved significant progress in the last decade, rendering with many novel applications. Due to its resemblance to the structure of extracellular matrix, BC-based biomaterials have been widely explored for biomedical applications such as tissue engineering and drug delivery. The recent advances in nanotechnology endow further modifications on BC and generate BC-based composites for different applications. This article presents a review on the research advancement on BC-based biomaterials from fabrication methods to biomedical applications, including wound dressing, artificial skin, vascular tissue engineering, bone tissue regeneration, drug delivery, and other applications. The preparation of these materials and their potential applications are reviewed and summarized. Important factors for the applications of BC in biomedical applications including degradation and pore structure characteristic are discussed in detail. Finally, the challenges in future development and potential advances of these materials are also discussed.

Sequential Oxidation on Wood and Its Application in Pb2+ Removal from Contaminated Water

Raw wood was subjected to sequential oxidation to produce 2,3,6-tricarboxycellulose (TCC) nanofibers with a high surficial charge of 1.14 mmol/g in the form of carboxylate groups. Three oxidation steps, including nitro-oxidation, periodate, and sodium chlorite oxidation, were successfully applied to generate TCC nanofibers from raw wood. The morphology of extracted TCC nanofibers measured using TEM and AFM indicated the average length, width, and thickness were in the range of 750 ± 110, 4.5 ± 1.8, and 1.23 nm, respectively. Due to high negative surficial charges on TCC, it was studied for its absorption capabilities against Pb2+ ions. The remediation results indicated that a low concentration of TCC nanofibers (0.02 wt%) was able to remove a wide range of Pb2+ ion impurities from 5–250 ppm with an efficiency between 709–99%, whereby the maximum adsorption capacity (Qm) was 1569 mg/g with R2 0.69531 calculated from Langmuir fitting. It was observed that the high adsorption capacity of TCC nanofibers was due to the collective effect of adsorption and precipitation confirmed by the FTIR and SEM/EDS analysis. The high carboxylate content and fiber morphology of TCC has enabled it as an excellent substrate to remove Pb2+ ions impurities.

Toward Biodegradable Electronics: Ionic Diodes Based on a Cellulose Nanocrystal-Agarose Hydrogel

Bioderived cellulose nanocrystals (CNCs) are used to create light, flexible, biocompatible, and biodegradable electronic devices. Herein, surface modification of cellulose nanocrystals was employed to fabricate cationic and anionic CNCs. Subsequently, we demonstrated rectification behavior from a fixed junction between two agarose hydrogels doped with cationic and anionic cellulose nanocrystals. The current rectification ratio reaches 70 reproducibly, which is significantly higher than that for analogous diodes generated with microfibrillated cellulose (∼15) and the first polyelectrolyte gel diode (∼40). The current-voltage characteristics of the CNC-hydrogel diode are influenced by concentration, gel thickness, scanning frequency, and applied voltage. The high surface area of CNC resulted in high charge density after surface modification, which in turn resulted in good rectification behavior from only small amounts of dopant material.

Optimizing the properties of Zodo gum and examining its potential for amino acid binding by periodate oxidation

In this study, the Zodo gum exudated by Amygdalus scoparia spach underwent the periodate oxidation process for chemical modification and the formation of dialdehyde groups. Modification of the Zodo gum properties was done using the periodate oxidation method, response surface methodology (RSM) and central composite design (CCD), with 4 factors of sodium periodate volume (6.4-19.2 mL), temperature (35-55 °C), pH (3-5) and time (2-4 h). Dialdehyde Zodo gum (DZG) was produced by controlling test variables and measuring some responses including dialdehyde content and efficacy, in addition to evaluating the rheological parameters. Quadratic, linear polynomial equations were then fitted with the insignificant Lack of fit and high R² to address the relationship between the mentioned variables and responses. Optimal test conditions, including pH = 3.9, T = 43 °C and Time = 3.5 h, were also determined for the production of DZG₁₀, DZG₂₀ and DZG₃₀ samples. The results of ¹H-¹³C NMR, FTIR and determination of the aldehyde content indicated the formation of dialdehyde groups in equilibrium with the dominant hemiacetal form. The AFM study of the DZG₃₀ sample also showed over-oxidation and depolymerization, which could be associated with increased hydrophobic properties and the reduced viscosity. Although the DZG₃₀ sample had the highest amount of the dialdehyde factor group with the tendency to combine with the amino group of proteins, DZG₁₀ and DZG₂₀ samples could be recommended for industrial applications due to the nonoccurrence of overoxidation.

Review: Periodate oxidation of wood polysaccharides-Modulation of hierarchies

Periodate oxidation of polysaccharides has transitioned from structural analysis into a modification method for engineered materials. This review summarizes the research on this topic. Fibers, fibrils, crystals, and molecules originating from forests that have been subjected to periodate oxidation can be crosslinked with other entities via the generated aldehyde functionality, that can also be oxidized or reduced to carboxyl or alcohol functionality or used as a starting point for further modification. Periodate-oxidized materials can be subjected to thermal transitions that differ from the native cellulose. Oxidation of polysaccharides originating from forests often features oxidation of structures rather than liberated molecules. This leads to changes in macro, micro, and supramolecular assemblies and consequently to alterations in physical properties. This review focuses on these aspects of the modulation of structural hierarchies due to periodate oxidation.

Partially Oxidized Cellulose grafted with Polyethylene Glycol mono-Methyl Ether (m-PEG) as Electrolyte Material for Lithium Polymer Battery

Herein, a novel cellulose derivative has been synthesized and investigated as a nature-derived solid polymer electrolyte for lithium batteries. Cellulose is oxidized in a two-step process to dicarboxylic acid cellulose to allow for grafting low molecular weight poly(ethylene glycol) monomethyl ether (550 g mol^-1) via Fischer-Speier esterification at the thus obtained carboxyl groups. The chemical structure of the synthesized materials is confirmed by Fourier-transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy as well as X-ray diffraction. Incorporating lithium bis(trifluoromethane-sulfonyl)imide (LiTFSI) as conducting salt and N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr₁₄TFSI) ionic liquid as plasticizer results in the realization of an amorphous and solvent-free solid polymer electrolyte. These electrolyte membranes are characterized by high thermal and electrochemical stability and ionic conductivities of about 1×10^-5 S cm^-1 at 20 °C and 2.5×10^-4 S cm^-1 at 80 °C, which enables very stable lithium stripping and plating for more than 800 h.

Selective Isolation Methods for Cellulose and Chitin Nanocrystals

This Minireview focuses on the selective isolation methods for the preparation of cellulose nanocrystals (CNCs) and chitin nanocrystals (ChNCs). Various selective preparation strategies with specific preparation conditions and reaction mechanisms are summarized. In particular, these selective reaction routes include controlled acid hydrolysis and selective oxidations at specific positions of cellulose or chitin fibers as well as particular reaction sites of the repeating monosaccharide building blocks of their main chains. These lead to selective cleavage of the ordered and non-ordered regions of cellulose and chitin and result in efficient production of CNCs and ChNCs.

pH-responsive polymeric nanoparticles with tunable sizes for targeted drug delivery

Biodegradable nanoparticles (NPs) have shown great promise as intracellular imaging probes, nanocarriers and drug delivery vehicles. In this study, we designed and prepared amphiphilic cellulose derivatives via Schiff base reactions between 2,3-dialdehyde cellulose (DAC) and amino compounds. Polymeric NPs were facilely fabricated via the self-assembly of the as-synthesized amphiphilic macromolecules. The size distribution of the obtained NPs can be tuned by changing the amount and length of the grafted hydrophobic side-chains. Anticancer drugs (DOX) were encapsulated in the NPs and the drug-loaded NPs based on cellulose derivatives were stable in neutral and alkaline environments for at least a month. They rapidly decomposed with the efficient release of the drug in acidic tumor microenvironments. These drug-loaded NPs have the potential for application in cancer treatment.

Controlling the degradation of cellulose scaffolds with Malaprade oxidation for tissue engineering

Cellulose scaffolds, whose biodegradation can be controlled through the reaction with amine compounds in the human body, were developed for tissue engineering applications.

Potential of di-aldehyde cellulose for sustained release of oxytetracycline: A pharmacokinetic study

This study focused on the in-vivo sustained release of oxytetracycline (OTC) loaded on di-aldehyde cellulose (DAC). The periodate oxidation method was used for the synthesis of DAC. The prepared DAC-OTC material was characterized by different techniques such as Scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Transmission electron microscopy (TEM) and particle size analyzer. The pharmacokinetic studies were performed on DAC-OTC composite system and commercial tablet (COTA). The results of pharmacokinetic studies demonstrated that DAC-OTC exhibited higher area under the curve (AUC) (482.8 μghmL^-1) as compared to COTA (90.72 μghmL^-1). DAC-OTC composite system has double compartment pattern with improvement in mean residing time (MRT) and area under moment curve (AUMC_0-∞) than the commercial tablet (2.8 and 15.13 folds higher, respectively). Swelling index of DAC-OTC at different pH and pKa of OTC release imply that controlled in-vivo release in DAC-OTC composite system could be due to the simultaneous occurrence of the covalent and hydrogen bond between OTC and di-aldehyde cellulose. These results indicate that di-aldehyde cellulose may improve the in-vivo bioavailability of OTC.

Tailor-made material characteristics of bacterial cellulose for drug delivery applications in dentistry

Bacterial cellulose (BC) has shown high potential as innovative wound dressing and drug delivery system. Bringing both together, drug-loaded BC was investigated for applications in dental therapies such as dental extraction or mucosal transplantation. Both applications would benefit from a material which degrades under physiological conditions, and from an antibiotic environment. Consequently, periodate-oxidation of BC was investigated to facilitate modified degradation behaviour. A periodate concentration of 0.14 mol/L at ϑ = 25 °C and t = 8 h resulted in a material loss of <10%, but at the same time a sufficient degree of degradation. Additionally, native and oxidised BC loaded with doxycycline was tested for prophylaxis against infection. An in vitro-toxicity test (MTT assay) provided a first confirmation of biocompatibility, whereas agar diffusion tests proved antibiotic efficiency against pathogenic oral bacteria. Release studies of the drug from native and oxidised BC confirmed a comparative biphasic release behaviour.

Transparent, Flexible, and Strong 2,3-Dialdehyde Cellulose Films with High Oxygen Barrier Properties

2,3-Dialdehyde cellulose (DAC) of a high degree of oxidation (92% relative to AGU units) prepared by oxidation of microcrystalline cellulose with sodium periodate (48 °C, 19 h) is soluble in hot water. Solution casting, slow air drying, hot pressing, and reinforcement by cellulose nanocrystals afforded films (∼100 μm thickness) that feature intriguing properties: they have very smooth surfaces (SEM), are highly flexible, and have good light transmittance for both the visible and near-infrared range (89–91%), high tensile strength (81–122 MPa), and modulus of elasticity (3.4–4.0 GPa) depending on hydration state and respective water content. The extraordinarily low oxygen permeation of <0.005 cm³ μm m^–2 day^–1 kPa^–1 (50% RH) and <0.03 cm³ μm m^–2 day^–1 kPa^–1 (80% RH) can be regarded as a particularly interesting feature of DAC films. The unusually high initial contact angle of about 67° revealed a rather low hydrophilicity compared to other oxidatively modified or unmodified cellulosic materials which is most likely the result of inter- and intramolecular hemiacetal and hemialdal formation during drying and pressing.

The Preparation of Nano-SiO₂/Dialdehyde Cellulose Hybrid Materials as a Novel Cross-Linking Agent for Collagen Solutions

Nano-SiO₂ was immobilized onto dialdehyde cellulose (DAC) to prepare SiO₂/DAC hybrid materials. Fourier transform infrared spectra (FTIR), thermogravimetric analysis and field emission scanning electron microscopy of SiO₂/DAC indicated that nano-SiO₂ had been successfully hybridized with DAC. X-ray diffraction suggested that the structure of DAC was influenced by the nano-SiO₂. SiO₂/DAC was then used as the cross-linker of collagen solutions. Gel electrophoresis patterns and FTIR reflected that cross-linking occurred between DAC and collagen, but that collagen retained the native triple-helix, respectively. Differential scanning calorimetry indicated that the thermal stability of collagen could be effectively improved by SiO₂/DAC. Dynamic rheology tests revealed that the flowability of collagens cross-linked by SiO₂/DAC was superior to that of those cross-linked by DAC; meanwhile, collagens cross-linked by SiO₂/DAC possessed a more homogeneous morphology compared to those cross-linked by DAC. The hybridization of SiO₂/DAC as a cross-linker for collagen could effectively prevent the gelation caused by excessive cross-linking, and significantly improve the thermostability of collagen, which could be helpful for collagen being applied in fields including biomaterials, cosmetics, etc.

Current characterization methods for cellulose nanomaterials

A new family of materials comprised of cellulose, cellulose nanomaterials (CNMs), having properties and functionalities distinct from molecular cellulose and wood pulp, is being developed for applications that were once thought impossible for cellulosic materials. Commercialization, paralleled by research in this field, is fueled by the unique combination of characteristics, such as high on-axis stiffness, sustainability, scalability, and mechanical reinforcement of a wide variety of materials, leading to their utility across a broad spectrum of high-performance material applications. However, with this exponential growth in interest/activity, the development of measurement protocols necessary for consistent, reliable and accurate materials characterization has been outpaced. These protocols, developed in the broader research community, are critical for the advancement in understanding, process optimization, and utilization of CNMs in materials development. This review establishes detailed best practices, methods and techniques for characterizing CNM particle morphology, surface chemistry, surface charge, purity, crystallinity, rheological properties, mechanical properties, and toxicity for two distinct forms of CNMs: cellulose nanocrystals and cellulose nanofibrils.

A Simple Approach to Prepare Carboxycellulose Nanofibers from Untreated Biomass

A simple approach was developed to prepare carboxycellulose nanofibers directly from untreated biomass using nitric acid or nitric acid-sodium nitrite mixtures. Experiments indicated that this approach greatly reduced the need for multichemicals, and offered significant benefits in lowering the consumption of water and electric energy, when compared with conventional multiple-step processes at bench scale (e.g., TEMPO oxidation). Additionally, the effluent produced by this approach could be efficaciously neutralized using base to produce nitrogen-rich salts as fertilizers. TEM measurements of resulting nanofibers from different biomasses, possessed dimensions in the range of 190-370 and 4-5 nm, having PDI = 0.29-0.38. These nanofibers exhibited lower crystallinity than untreated jute fibers as determined by TEM diffraction, WAXD and ¹³C CPMAS NMR (e.g., WAXD crystallinity index was ∼35% for nanofibers vs 62% for jute). Nanofibers with low crystallinity were found to be effective for removal of heavy metal ions for drinking water purification.

2,3-Dialdehyde nanofibrillated cellulose as a potential material for the treatment of MRSA infection

Nanocellulose materials have undergone rapid development in recent years as promising biomedical materials due to their excellent physical and biological properties, in particular their biocompatibility, biodegradability, and low cytotoxicity.

Mechanical and moisture sensitivity of fully bio-based dialdehyde carboxymethyl cellulose cross-linked soy protein isolate films

Dialdehyde carboxymethyl cellulose (DCMC) crosslinked soy protein isolate (SPI) films were prepared by solvent casting method. Effect of DCMC treatment on mechanical properties, water sensitivity, light barrier properties and thermal stability were investigated. Significant increase in tensile strength (TS) was observed (up to 218%), suggesting occurrence of highly effective crosslinking between SPI and DCMC. Significant improvement in TS compared to other dialdehyde polysaccharide crosslinking agents such as dialdehyde starch is likely due to higher compatibility of DCMC with SPI, as was further confirmed by SEM images. Crosslinking also led to reduction in water vapor permeability and moisture content along with an increase of insoluble mass percentage, indicating improvement in water resistance of these bio-based protein films. Thermal stability of protein films also showed improvement post crosslinking of DCMC.

Aldehyde-functionalized porous nanocellulose for effective removal of heavy metal ions from aqueous solutions

Nanoscale sorption is a promising strategy for catalyst and purification system design.

One-step green synthesis of non-hazardous dicarboxyl cellulose flocculant and its flocculation activity evaluation

The waste management of used flocculants is a thorny issue in the field of wastewater treatment. To natural cellulose based flocculants, utilization of hazardous cellulose solvent and simplification of synthetic procedure are the two urgent problems needing to be further improved. In this work, a series of natural dicarboxyl cellulose flocculants (DCCs) were one-step synthesized via Schiff-base route. The cellulose solvent (NaOH/Urea solution) was utilized during the synthesis process. The full-biodegradable flocculants avoid causing secondary pollution to environment. The chemical structure and solution property of the DCC products were characterized by FT-IR, (1)H NMR, (13)C NMR, TGA, FESEM, charge density and ζ-potential. Kaolin suspension and effluent from paper mill were selected to evaluate the flocculation activity of the DCCs. Their flocculation performance was compared with that of commercial cationic polyacrylamide and poly aluminium chloride flocculants. The positive results showed that the NaOH/Urea solvent effectively promoted the dialdehyde cellulose (DAC) conversion to DCC in the one-step synthesis reaction. The DCCs with the carboxylate content more than 1 mmol/g exhibited steady flocculation performance to kaolin suspension in the broad pH range from 4 to 10. Its flocculation capacity to the effluent from paper mill also showed excellent.

Surface modification of cellulose nanocrystals

Chemical modification of cellulose nanocrystals is an increasingly popular topic in the literature. This review analyses the type of cellulose nanocrystal modification reactions that have been published in the literature thus far and looks at the steps that have been taken towards analysing the products of the nanocrystal modifications. The main categories of reactions carried out on cellulose nanocrystals are oxidations, esterifications, amidations, carbamations and etherifications. More recently nucleophilic substitutions have been used to introduce more complex functionality to cellulose nanocrystals. Multi-step modifications are also considered. This review emphasizes quantification of modification at the nanocrystal surface in terms of degree of substitution and the validity of conclusions drawn from different analysis techniques in this area. The mechanisms of the modification reactions are presented and considered with respect to the effect on the outcome of the reactions. While great strides have been made in the quality of analytical data published in the field of cellulose nanocrystal modification, there is still vast scope for improvement, both in data quality and the quality of analysis of data. Given the difficulty of surface analysis, cross-checking of results from different analysis techniques is fundamental for the development of reliable cellulose nanocrystal modification techniques.

Pretreatment-dependent surface chemistry of wood nanocellulose for pH-sensitive hydrogels

Nanocellulose from wood is a promising material with potential in various technological areas. Within biomedical applications, nanocellulose has been proposed as a suitable nano-material for wound dressings. This is based on the capability of the material to self-assemble into 3D micro-porous structures, which among others have an excellent capacity of maintaining a moist environment. In addition, the surface chemistry of nanocellulose is suitable for various applications. First, OH-groups are abundant in nanocellulose materials, making the material strongly hydrophilic. Second, the surface chemistry can be modified, introducing aldehyde and carboxyl groups, which have major potential for surface functionalization. In this study, we demonstrate the production of nanocellulose with tailor-made surface chemistry, by pre-treating the raw cellulose fibres with carboxymethylation and periodate oxidation. The pre-treatments yielded a highly nanofibrillated material, with significant amounts of aldehyde and carboxyl groups. Importantly, the poly-anionic surface of the oxidized nanocellulose opens up for novel applications, i.e. micro-porous materials with pH-responsive characteristics. This is due to the swelling capacity of the 3D micro-porous structures, which have ionisable functional groups. In this study, we demonstrated that nanocellulose gels have a significantly higher swelling degree in neutral and alkaline conditions, compared to an acid environment (pH 3). Such a capability can potentially be applied in chronic wounds for controlled and intelligent release of antibacterial components into biofilms.

Effect of selective oxidation of bacterial cellulose on degradability in phosphate buffer solution and their affinity for epidermal cell attachment

Oxidized bacterial cellulose showed the 3D nano-fibrils structure of BC. The mass loss and degradation rate of OBC were much higher than those of BC. When immersed in PBS, OBC degraded gradually. Cell-adhesion and proliferation studies revealed that OBC had excellent cellular affinity.

A Novel Approach to Incorporation of Chitosan in Cotton for Improving Fabric Performance

Incorporation of chitosan in the molecular structure of a cotton surface was effected by two approaches. The first approach involved oxidation of cotton fabric with sodium periodate (NaIO4) and treatment of the fabric with chitosan in the subsequent step. The second approach formed the basis for devising a single-step process in which the fabric was treated in an aqueous solution containing both oxidants and chitosan. Appropriate conditions were established for a two-step process. The results of one step process were used to devise a novel one-step process in which cotton fabric containing chitosan could be achieved. This fabric exhibited significantly improved performances when compared with the untreated and processed fabric. It is assumed that NaIO4 oxidants and chitosan enhance the interaction of chitosan with cotton by modifying the molecular structure of both.