Collagen-chitosan polymeric scaffolds for the in vitro culture of human epidermoid carcinoma cells

Marine collagen bio-composites materials: Interactions with small active molecules and their application in food industry

Collagen, the primary fibrillar protein found in marine organisms has gained significant attention due to its nutritional and functional properties. It plays a crucial role in food quality and textural attributes, making it a valuable ingredient in various food applications. This study focuses on the interactions of marine-derived collagen and its gelatin derivatives with small bioactive molecules, including phenolic compounds, polysaccharides, and others, which are briefly discussed. These interactions are governed by mechanisms such as hydrogen bonding, electrostatic forces, hydrophobic interactions, and van der Waals contacts, resulting in the formation of bio-composites with enhanced stability, bioavailability, and functionality. This article also highlights recent advancements in extraction methods, physicochemical characterization, and the role of collagen-based composites in food applications, such as emulsification, stabilization, and microencapsulation. Furthermore, this review also summarizes the challenges related to the lower thermal stability of marine collagen compared to mammalian sources, along with potential solutions through innovative processing techniques. Finally, the article briefly discusses how marine collagen-based bio-composites offer promising prospects for developing functional and sustainable food products.

Cell-adhesive double network self-healing hydrogel capable of cell and drug encapsulation: New platform to construct biomimetic environment with bottom-up approach

This study presents the development and characterization of a novel double-network self-healing hydrogel based on N-carboxyethyl chitosan (CEC) and oxidized dextran (OD) with the incorporation of crosslinked collagen (CEC-OD/COL-GP) to enhance its biological and physicochemical properties. The hydrogel formed via dynamic imine bond formation exhibited efficient self-healing within 30 min, and a compressive modulus recovery of 92 % within 2 h. In addition to its self-healing ability, CEC-OD/COL-GP possesses unique physicochemical characteristics including transparency, injectability, and adhesiveness to various substrates and tissues. Cell encapsulation studies confirmed the biocompatibility and suitability of the hydrogel as a cell-culture scaffold, with the presence of a collagen network that enhances cell adhesion, spreading, long-term cell viability, and proliferation. Leveraging their unique properties, we engineered assemblies of self-healing hydrogel modules for controlled spatiotemporal drug delivery and constructed co-culture models that simulate angiogenesis in tumor microenvironments. Overall, the CEC-OD/COL-GP hydrogel is a versatile and promising material for biomedical applications, offering a bottom-up approach for constructing complex structures with self-healing capabilities, controlled drug release, and support for diverse cell types in 3D environments. This hydrogel platform has considerable potential for advancements in tissue engineering and therapeutic interventions.

Turning Portunus pelagicus Shells into Biocompatible Scaffolds for Bone Regeneration

Bone tissue engineering (BTE) provides an alternative for addressing bone defects by integrating cells, a scaffold, and bioactive growth factors to stimulate tissue regeneration and repair, resulting in effective bioengineered tissue. This study focuses on repurposing chitosan from blue swimming crab (Portunus pelagicus) shell waste as a composite scaffold combined with HAP and COL I to improve biocompatibility, porosity, swelling, and mechanical properties. The composite scaffold demonstrated nearly 60% porosity with diameters ranging from 100-200 μm with an interconnected network that structurally mimics the extracellular matrix. The swelling ratio of the scaffold was measured at 208.43 ± 14.05%, 248.93 ± 4.32%, 280.01 ± 1.26%, 305.44 ± 20.71%, and 310.03 ± 17.94% at 1, 3, 6, 12, and 24 h, respectively. Thus, the Portunus pelagicus scaffold showed significantly lower degradation ratios of 5.64 ± 1.89%, 14.34 ± 8.59%, 19.57 ± 14.23%, and 29.13 ± 9.87% for 1 to 4 weeks, respectively. The scaffold supports osteoblast attachment and proliferation for 7 days. Waste from Portunus pelagicus shells has emerged as a prospective source of chitosan with potential application in tissue engineering.

Development of alginate/chitosan hydrogel loaded with obestatin and evaluation of collagen type I, III, VEGF and TGF-β1 gene expression for skin repair in a rat model (in vitro and in vitro study)

BACKGROUND

Skin injuries have long been recognized as a prevalent type of physical injury. As a result, numerous research studies have been performed to discover an effective mechanism for wound healing. Therefore, tissue engineering of skin has developed as a potential solution for traditional methods of treating skin injuries.

METHODS AND MATERIALS

Alginate/Chitosan hydrogel was mixed with 1, 10, 100, and 150 µM Obestatin, and evaluated the morphology, cumulative release, hemocompatibility and cytocompatibility, water absorption, cell viability, weight loss, and antibacterial characteristics of three-dimensional (3D) alginate (Alg) and chitosan (Cs) hydrogels during the process of wound curing. Various concentrations of Obestatin (Obes) were utilized for this purpose. Finally, the hydrogels that were made were tested on a full-thickness dermal wound in a Wistar rat model. The curative effects were determined by analyzing RNA expression and examining tissue stained with Masson's trichrome (MT) and hematoxylin-eosin (H&E).

RESULTS

The biodegradability of this hydrogel was verified using weight loss testing, which demonstrated a reduction of around 90% after a period of 3 days. Furthermore, the MTT assay demonstrated that hydrogels have a beneficial effect on cell proliferation without inducing any harmful effects. Furthermore, the hydrogels produced demonstrated higher wound closure in vivo compared to the wounds treated with gauze (negative control group). Among the hydrogel groups, the chitosan/alginate/obestatin 100 µM group exhibited the apical percentage of wound closure, gene expression, and secondary epithelialization, but in 150 µM concentrations, we saw a lower rate of cell growth and proliferation and increase in hemolysis. In addition, RT-PCR analysis demonstrated that a concentration of 100 µM obestatin resulted in an upregulation in the expression of mRNA for vascular endothelial growth factor (VEGF), collagen type I & type III, and transforming growth factor-beta (TGF-β).

CONCLUSION

The present study suggests that 3D Alg/Cs hydrogels with a concentration of 100 µM obestatin have the potential for clinical application in the treatment of skin injuries.

Chitosan Scaffolds from Crustacean and Fungal Sources: A Comparative Study for Bone-Tissue-Engineering Applications

Chitosan (CS), a biopolymer, holds significant potential in bone regeneration due to its biocompatibility and biodegradability attributes. While crustacean-derived CS is conventionally used in research, there is growing interest in fungal-derived CS for its equally potent properties in bone regenerative applications. Here, we investigated the physicochemical and biological characteristics of fungal (MDC) and crustacean (ADC)-derived CS scaffolds embedded with different concentrations of tricalcium phosphate minerals (TCP), i.e., 0(wt)%: ADC/MDC-1, 10(wt)%: ADC/MDC-2, 20(wt)%: ADC/MDC-3 and 30(wt)%: ADC/MDC-4. ADC-1 and MDC-1 lyophilised scaffolds lacking TCP minerals presented the highest zeta potentials of 47.3 ± 1.2 mV and 55.1 ± 1.6 mV, respectively. Scanning electron microscopy revealed prominent distinctions whereby MDC scaffolds exhibited striation-like structural microarchitecture in contrast to the porous morphology exhibited by ADC scaffold types. With regard to the 4-week scaffold mass reductions, MDC-1, MDC-2, MDC-3, and MDC-4 indicated declines of 55.98 ± 4.2%, 40.16 ± 3.6%, 27.05 ± 4.7%, and 19.16 ± 5.3%, respectively. Conversely, ADC-1, ADC-2, ADC-3, and ADC-4 presented mass reductions of 35.78 ± 5.1%, 25.19 ± 4.2%, 20.23 ± 6.3%, and 13.68 ± 5.4%, respectively. The biological performance of the scaffolds was assessed through in vitro bone marrow mesenchymal stromal cell (BMMSCs) attachment via indirect and direct cytotoxicity studies, where all scaffold types presented no cytotoxic behaviours. MDC scaffolds indicated results comparable to ADC, where both CS types exhibited similar physiochemical properties. Our data suggest that MDC scaffolds could be a potent alternative to ADC-derived scaffolds for bone regeneration applications, particularly for 10(wt)% TCP concentrations.

Design, clinical applications and post-surgical assessment of bioresorbable 3D-printed craniofacial composite implants

This study details the design, fabrication, clinical trials' evaluation, and analysis after the clinical application of 3D-printed bone reconstruction implants made of nHAp@PLDLLA [nanohydroxyapatite@poly(L-lactide-co-D,L-lactide)] biomaterial. The 3D-printed formulations have been tested as bone reconstruction Cranioimplants in 3 different medical cases, including frontal lobe, mandibular bone, and cleft palate reconstructions. Replacing one of the implants after 6 months provided a unique opportunity to evaluate the post-surgical implant obtained from a human patient. This allowed us to quantify physicochemical changes and develop a spatial map of osseointegration and material degradation kinetics as a function of specific locations. To the best of our knowledge, hydrolytic degradation and variability in the physicochemical and mechanical properties of the biomimetic, 3D-printed implants have not been quantified in the literature after permanent placement in the human body. Such analysis has revealed the constantly changing properties of the implant, which should be considered to optimize the design of patient-specific bone substitutes. Moreover, it has been proven that the obtained composition can produce biomimetic, bioresorbable and bone-forming alloplastic substitutes tailored to each patient, allowing for shorter surgery times and faster patient recovery than currently available methods.

Collagen/gelatin and polysaccharide complexes enhance gastric retention and mucoadhesive properties

This article has focused on collagen-gelatin, the gelation process, as well as blend interaction between collagen/gelatin with various polysaccharides to boost mucoadhesion and gastric retention. The interaction between mucoadhesive materials and mucin layers is of significant interest in the development of drug delivery systems and biomedical applications for effective targeting and prolonged time in the gastrointestinal tract. This paper reviews the current advancement and mucoadhesive properties of collagen/gelatin and different polysaccharide complexes concerning the mucin layer and interactions are briefly highlighted. Collagen/gelatin and polysaccharide blends biocompatible and biodegradable, the complex biomolecules have shown encouraging mucoadhesive properties due to their cationic nature and ability to form hydrogen bonds with mucin glycoproteins. The mucoadhesion mechanism was attributed to the electrostatic interactions between the positively charged amino (NH2) groups of blend biopolymers and the negatively charged sialic acid residues present in mucin glycoprotein. At the end of this article, the encouraging prospect of collagen/polysaccharide complex and mucin glycoprotein is highlighted.

Nanofibrous electrospun scaffold doped with hydroxyapatite derived from sand lobster shell (Panulirus homarus) for bone tissue engineering

Healing of significant segmental bone defects remains a challenge, and various studies attempt to make materials that mimic bone structures and have biocompatibility, bioactivity, biodegradability, and osteoconductivity to native bone tissues. In this work, a nanofiber scaffold membrane of polyvinyl alcohol (PVA)/polyvinylpyrrolidone (PVP)/chitosan (CS) combined with hydroxyapatite (HAp) from sand lobster (SL; Panulirus homarus) shells, as a calcium source, was successfully synthesized to mimic the nanoscale extracellular matrix (ECM) in the native bone. The HAp from SL shells was synthesized by co-precipitation method with Ca/P of 1.67 and incorporated into the nanofiber membrane PVA/PVP/CS synthesized by the electrospinning method with varying concentrations, i.e. 0, 1, 3, and 5% (w/v). Based on the morphological and physicochemical analysis, the addition of HAp into the nanofiber successfully showed incorporation into the nanofiber with small agglomeration at HAp concentrations of 1, 3, and 5% (w/v). This led to a smaller fiber diameter with higher concentration of Hap, and incorporating HAp into the nanofiber could improve the mechanical properties of the nanofiber closer to the trabecula bone. Moreover, in general, swelling due to water absorption increases due to higher hydrophilicity at higher HAp concentrations and leads to the improvement of the degradation process and protein adsorption of the nanofiber. Biomineralization in a simulated body fluid (SBF) solution confirms that the HAp in the nanofiber increases bioactivity, and it can be seen that more apatite is formed during longer immersion in the SBF solution. The nanofiber PVA/PVP/CS HAp 5% has the most potential for osteoblast (MC3T3E1) cell viability after being incubated for 24 h, and it allowed the cell to attach and proliferate. Additionally, the higher HAp concentration in the nanofiber scaffold membrane can significantly promote the osteogenic differentiation of MC3T3E1 cells. Overall, the PVA/PVP/CS/HAp 5% nanofiber scaffold membrane has the most potential for bone tissue engineering.

Comparison of the differentiation of ovine fetal bone-marrow mesenchymal stem cells towards osteocytes on chitosan/alginate/CuO-NPs and chitosan/alginate/FeO-NPs scaffolds

In the current study, the creation of a chitosan/alginate scaffold hydrogel with and without FeO-NPs or CuO-NPs was studied. From fetal ovine bone marrow mesenchymal stem cells (BM-MSCs) were isolated and cultivated. Their differentiation into osteocyte and adipose cells was investigated. Also, on the scaffolds, cytotoxicity and apoptosis were studied. To investigate the differentiation, treatment groups include: (1) BM-MSCs were plated in DMEM culture medium with high glucose containing 10% FBS and antibiotics (negative control); (2) BM-MSCs were plated in osteogenic differentiation medium (positive control); (3) positive control group + FeO-NPs, (4) positive control group + CuO-NPs; (5) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate scaffold; (6) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/FeO-NPs scaffold; and (7) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/CuO-NPs scaffold. Alkaline phosphatase enzyme concentrations, mineralization rate using a calcium kit, and mineralization measurement by alizarin staining quantification were evaluated after 21 days of culture. In addition, qRT-PCR was used to assess the expression of the ALP, ColA, and Runx2 genes. When compared to other treatment groups, the addition of CuO-NPs in the chitosan/alginate hydrogel significantly increased the expression of the ColA and Runx2 genes (p < 0.05). However, there was no significant difference between the chitosan/alginate hydrogel groups containing FeO-NPs and CuO-NPs in the expression of the ALP gene. It appears that the addition of nanoparticles, in particular CuO-NPs, has made the chitosan/alginate scaffold more effective in supporting osteocyte differentiation.

Chitosan/alginate scaffold enhanced with Berberis vulgaris extract for osteocyte differentiation of ovine fetal stem cells

Designing biocompatible polymers using plant derivatives can be extremely useful in tissue engineering, nanomedicine, and many other fields of medicine. In this study, it was first looked into how chitosan/alginate scaffolds were made and characterized in the presence of berberine and barberry fruit extract. Second, the process of proliferation and differentiation of ovine fetal BM-MSCs (bone marrow-mesenchymal stem cells) was assessed on these scaffolds after BM-MSCs were extracted and confirmed by developing into osteocyte and adipose cells. To investigate the differentiation, treatment groups include (1) ovine fetal BM-MSCs were plated in Dulbecco's modified eagle medium culture medium with high glucose containing 10% fetal bovine serum and antibiotics (negative control), (2) ovine fetal BM-MSCs were plated in osteogenic differentiation medium (positive control group), (3) positive control group + barberry fruit extract, (4) positive control group + berberine, (5) ovine fetal BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate scaffold (hydrogel group), (6) ovine fetal BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/barberry fruit extract scaffold (hydrogel group containing barberry fruit extract), and (7) ovine fetal BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/berberine scaffold (hydrogel group containing berberine). Alkaline phosphatase (ALP) enzyme concentrations, mineralization rate using a calcium kit, and mineralization measurement by alizarin staining quantification were all found after 21 days of culture. In addition, real-time quantitative reverse transcription polymerase chain reaction was used to assess the expression of the ALP, COL1A2, and Runx2 genes. Days 5 and 7 had the lowest water absorption by the hydrogel scaffold containing barberry extract, which was significant in comparison to other groups (p < .05). Among the hydrogel scaffolds under study, the one containing barberry extract exhibited the lowest tensile strength, and this difference was statistically significant (p < .05). The chitosan/alginate hydrogel has the highest tensile strength of all of them. In comparison to the control and other treatment groups, the inclusion of berberine in the chitosan/alginate hydrogel significantly increased the expression of the ALP, Runx2, and COL1A2 genes (p < .05). The osteocyte differentiation of mesenchymal stem cells in in vitro settings appears to have been enhanced by the inclusion of berberine in the chitosan/alginate scaffold.

Fabrication and evaluation of vitamin doped Zno/AgNPs nanocomposite based wheat gluten films: a promising findings for burn wound treatment

Burn wound treatment remains a significant issue in wound care management especially when multidrug resistant bacterial infection and accumulation are present. Delayed wound healing is mostly due to ineffectiveness of commercially available wound dressings that protects the wound but less efficient in healing perspective. Therefore, nano-based wound dressing might be efficient solution for wound healing management. The present study reports the fabrication and evaluation of zinc oxide (ZnO) or silver nanoparticles (Ag NPs) capped with vitamin A or E nanocomposite that were incorporated in wheat gluten (WG) films. The chemical structure, phase purity, and morphological features confirmed the successful coating of NPs by vitamins A and E and their interaction with WG during film casting. The maximum swelling response was observed by NPs vitamin composite WG films than control films while slow release of vitamins and NPs from films was observed up to 24 h. WG films either carrying ZnO or Ag NPs, and vitamin A or E demonstrated significant antioxidant and antibacterial potential. The NPs-vitamin composite loaded WG films showed wound contraction within 14 days during in vivo burn wound healing experiments on mice model. The rates of wound healing, re-epithelialization, collagen deposition with fibroblast regeneration, adipocytes, and hair follicle development were observed through visual and histopathological examination. The study reveals that vitamin A or E doped ZnO or Ag NPs fabricated in WG can be efficiently used against burn wounds due to their physiochemical and biological properties. Furthermore the biocompatible nature and biodegradable potential make the films more prone to mankind maneuver for initial protection and healing remedy.

Sciatic nerve injury regeneration in adult male rats using gelatin methacrylate (GelMA)/poly(2-ethy-2-oxazoline) (PEtOx) hydrogel containing 4-aminopyridine (4-AP)

One of the most important parts of the body is the peripheral nervous system, and any injuries in this system may result in potentially lethal consequences or severe side effects. The peripheral nervous system may not rehabilitate the harmed regions following disabling disorders, which reduce the quality of life of patients. Fortunately, in recent years, hydrogels have been proposed as exogenous alternatives to bridge damaged nerve stumps to create a useful microenvironment for advancing nerve recovery. However, hydrogel-based medicine in the therapy of peripheral nerve injury still needs a lot of improvement. In this study, GelMA/PEtOx hydrogel was used for the first time to deliver 4-Aminopyridine (4-AP) small molecules. 4-AP is a broad-spectrum potassium channel blocker, which has been demonstrated to increase neuromuscular function in patients with various demyelinating disorders. The prepared hydrogel showed a porosity of 92.2 ± 2.6% after 20 min, swelling ratio of 456.01 ± 2.0% after 180 min, weight loss of 81.7 ± 3.1% after 2 weeks, and good blood compatibility as well as sustainable drug release. MTT analysis was performed to assess the cell viability of the hydrogel and proved that the hydrogel is an appropriate substrate for the survival of cells. In vivo studies were performed for functional analysis and the sciatic functional index (SFI) as well as hot plate latency results showed that the use of GelMA/PEtOx+4-AP hydrogel enhances the regeneration compared to the GelMA/PEtOx hydrogel and the control group.

Fibrous PVA Matrix Containing Strontium-Substituted Hydroxyapatite Nanoparticles from Golden Apple Snail (Pomacea canaliculata L.) Shells for Bone Tissue Engineering

A scaffold that replicates the physicochemical composition of bone at the nanoscale level is a promising replacement for conventional bone grafts such as autograft, allograft, or xenograft. However, its creation is still a major challenge in bone tissue engineering. The fabrication of a fibrous PVA-HA/Sr matrix made of strontium (Sr)-substituted hydroxyapatite from the shell of Pomecea canaliculate L. (golden apple snail) is reported in this work. Since the fabrication of HAp from biogenic resources such as the shell of golden apple snail (GASs) should be conducted at very high temperature and results in high crystalline HAp, Sr substitution to Ca was applied to reduce crystallinity during HAp synthesis. The resulted HAp and HA/Sr nanoparticles were then combined with PVA to create fibrous PVA-HAp or PVA-HA/Sr matrices in 2 or 4 mol % Sr ions substitution by electrospinning. The nanofiber diameter increased gradually by the addition of HAp, HA/Sr 2 mol %, and HA/Sr 4 mol %, respectively, into PVA. The percentage of the swelling ratio increased and reached the maximum value in PVA-HA/Sr-4 mol %, as well as in its protein adsorption. Furthermore, the matrices with HAp or HA/Sr incorporation exhibited good bioactivity, increased cell viability and proliferation. Therefore, the fibrous matrices generated in this study are considered potential candidates for bone tissue engineering scaffolds. Further in vivo studies become an urgency to valorize these results into real clinical application.

3D printing of 'green' thermo-sensitive chitosan-hydroxyapatite bone scaffold based on lyophilized platelet-rich fibrin

The critical bone defect is still an urgent problem in the field of bone repair. Here, we reported a new type of chitosan (CS)-hydroxyapatite (HAP) scaffolds based on lyophilized platelet-rich fibrin (L-PRF) for releasing abundant growth factors to realize their respective functions. It also has strong mechanical properties to maintain the stability of the bone repair environment. However, acid-soluble CS hydrogels often contain toxic and organic solvents. Moreover, chemical agents may be used for cross-linking for better mechanical properties, further increasing cytotoxicity. In this study, we used an alkali/urea dissolution system to dissolve CS, which improved its mechanical properties and made it thermo-sensitive. Finally, the L-PRF-CS-HAP (P-C-H) composite scaffold was constructed by extrusion-based printing. The results showed that the printing ink had desirable printability and temperature sensitivity. The compressive properties of the scaffolds exhibited a trend of decline with L-PRF content increasing, but all of them could meet the strength of cancellous bone. Meanwhile, the scaffolds had high hydrophilicity, porosity, and could be degraded stablyin vitro. The antibacterial properties of the scaffolds were also verified, greatly reducing the risk of infection during bone repair. It was also demonstrated that the release time of growth factor from L-PRF was significantly prolonged, and growth factor could still be detected after 35 d of sustained release. The capacity of cells to proliferate increased as the number of L-PRF components increased, indicating that L-PRF still exhibited biological activity after 3D printing.

Novel fabrication of bioengineered injectable chitosan hydrogel loaded with conductive nanoparticles to improve therapeutic potential of mesenchymal stem cells in functional recovery after ischemic myocardial infarction

In recent decades, myocardial regeneration through stem cell transplantation and tissue engineering has been viewed as a promising technique for treating myocardial infarction. As a result, the researcher attempts to see whether co-culturing modified mesenchymal stem cells with Au@Ch-SF macro-hydrogel and H9C2 may help with tissue regeneration and cardiac function recovery. The gold nanoparticles (Au) incorporated into the chitosan-silk fibroin hydrogel (Au@Ch-SF) were validated using spectral and microscopic examinations. The most essential elements of hydrogel groups were investigated in detail, including weight loss, mechanical strength, and drug release rate. Initially, the cardioblast cells (H9C2 cells) was incubated with Au@Ch-SF macro-hydrogel, followed by mesenchymal stem cells (2 × 10⁵) were transplanted into the Au@Ch-SF macro-hydrogel+H9C2 culture at the ratio of 2:1. Further, cardiac phenotype development, cytokines expression and tissue regenerative performance of modified mesenchymal stem cells treatment were studied through various in vitro and in vivo analyses. The Au@Ch-SF macro-hydrogel gelation time was much faster than that of Ch and Ch-SF hydrogels, showing that Ch and SF exhibited greater intermolecular interactions. The obtained Au@Ch-SF macro-hydrogel has no toxicity on mesenchymal stem cells (MS) or cardiac myoblast (H9C2) cells, according to the biocompatibility investigation. MS cells co-cultured with Au@Ch-SF macro-hydrogel and H9C2 cells also stimulated cardiomyocyte fiber restoration, which has been confirmed in myocardial infarction rats using -MHC and Cx43 myocardial indicators. We developed a novel method of co-cultured therapy using MS cells, Au@Ch-SF macro-hydrogel, and H9C2 cells which could promote the regenerative activities in myocardial ischemia cells. These study findings show that co-cultured MS therapy might be effective for the treatment of myocardial injury.

Dicalcium Phosphate Dihydrate Mineral Loaded Freeze-Dried Scaffolds for Potential Synthetic Bone Applications

Dicalcium Phosphate Dihydrate (DCPD) mineral scaffolds alone do not possess the mechanical flexibility, ease of physicochemical properties' tuneability or suitable porosity required for regenerative bone scaffolds. Herein, we fabricated highly porous freeze-dried chitosan scaffolds embedded with different concentrations of Dicalcium Phosphate Dihydrate (DCPD) minerals, i.e., 0, 20, 30, 40 and 50 (wt)%. Increasing DCPD mineral concentration led to increased scaffold crystallinity, where the % crystallinity for CH, 20, 30, 40, and 50-DCPD scaffolds was determined to be 0.1, 20.6, 29.4, 38.8 and 69.9%, respectively. Reduction in scaffold pore size distributions was observed with increasing DCPD concentrations of 0 to 40 (wt)%; coalescence and close-ended pore formation were observed for 50-DCPD scaffolds. 50-DCPD scaffolds presented five times greater mechanical strength than the DCPD mineral-free scaffolds (CH). DCPD mineral enhanced cell proliferation for the 20, 30 and 40-DCPD scaffolds. 50-DCPD scaffolds presented reduced pore interconnectivity due to the coalescence of many pores in addition to the creation of closed-ended pores, which were found to hinder osteoblast cell proliferation.

Surface Functionalization of Ureteral Stents-Based Polyurethane: Engineering Antibacterial Coatings

Bacterial colonization of polyurethane (PU) ureteral stents usually leads to severe and challenging clinical complications. As such, there is an increasing demand for an effective response to this unmet medical challenge. In this study, we offer a strategy based on the functionalization of PU stents with chitosan-fatty acid (CS-FA) derivatives to prevent bacterial colonization. Three different fatty acids (FAs), namely stearic acid (SA), oleic acid (OA), and linoleic acid (LinA), were successfully grafted onto chitosan (CS) polymeric chains. Afterwards, CS-FA derivatives-based solutions were coated on the surface of PU stents. The biological performance of the modified PU stents was evaluated against the L929 cell line, confirming negligible cytotoxicity of the developed coating formulations. The antibacterial potential of coated PU stents was also evaluated against several microorganisms. The obtained data indicate that the base material already presents an adequate performance against Staphylococcus aureus, which slightly improved with the coating. However, the performance of the PU stents against Gram-negative bacteria was markedly increased with the surface functionalization approach herein used. As a result, this study reveals the potential use of CS-FA derivatives for surface functionalization of ureteral PU stents and allows for conjecture on its successful application in other biomedical devices.

Cartilage tissue engineering by co-transplantation of chondrocyte extracellular vesicles and mesenchymal stem cells, entrapped in chitosan-hyaluronic acid hydrogel

Mesenchymal stem cells (MSCs) on injectable hydrogels are mostly used to regenerate articular cartilage, which would have a variety of outcomes. Chondrocyte extracellular vesicles (EVs) have attracted many attentions for their chondrogenic differentiation capacity; however, the roles of EVs in both chondrogenic differentiation of MSCs and cartilage regeneration are poorly understood yet. In the current study, to investigate the differentiation effects of human articular chondrocyte EVs on adipose-derived MSCs, they were cultured in injectable chitosan-hyaluronic acid (CS-HA) hydrogel and then treated with chondrocyte EVs for 21 days. The continuous treatment of EVs performed on MSCs increased chondrogenic genes' expressions ofSOX9andCOL2A1and induced expression of Col II protein. In addition, glycosaminoglycans secretion was detected in the EV-treated MSCs after about 14 days. The therapeutic efficiency of this hydrogel and EVs was studied in a rabbit osteochondral defect model. MRI results revealed that the cartilage regeneration capacity of EV-treated MSCs with CS-HA hydrogel was greater than the untreated MSCs or the EV-treated MSCs without hydrogel. Moreover, histological results showed hyaline-like cartilage in the CS-HA/MSC and CS-HA/EV/MSC groups in the cartilage defect sites. These findings suggested that the chondrocyte-EVs and CS-HA hydrogel could provide the preferable niche for chondrogenic differentiation of MSCs and cartilage regeneration in osteoarthritis cartilage injuries.

Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application

Hydroxyapatite (HA) and HA-based nanocomposites have been recognized as ideal biomaterials in hard tissue engineering because of their compositional similarity to bioapatite. However, the traditional HA-based nanocomposites fabrication techniques still limit the utilization of HA in bone, cartilage, dental, applications, and other fields. In recent years, three-dimensional (3D) printing has been shown to provide a fast, precise, controllable, and scalable fabrication approach for the synthesis of HA-based scaffolds. This review therefore explores available 3D printing technologies for the preparation of porous HA-based nanocomposites. In the present review, different 3D printed HA-based scaffolds composited with natural polymers and/or synthetic polymers are discussed. Furthermore, the desired properties of HA-based composites via 3D printing such as porosity, mechanical properties, biodegradability, and antibacterial properties are extensively explored. Lastly, the applications and the next generation of HA-based nanocomposites for tissue engineering are discussed.

The Effects of Crosslinking on the Rheology and Cellular Behavior of Polymer-Based 3D-Multilayered Scaffolds for Restoring Articular Cartilage

Polymer-based tri-layered (bone, intermediate and top layers) scaffolds used for the restoration of articular cartilage were prepared and characterized in this study to emulate the concentration gradient of cartilage. The scaffolds were physically or chemically crosslinked. In order to obtain adequate scaffolds for the intended application, the impact of the type of calcium phosphate used in the bone layer, the polymer used in the intermediate layer and the interlayer crosslinking process were analyzed. The correlation among SEM micrographs, physical-chemical characterization, swelling behavior, rheological measurements and cell studies were examined. Storage moduli at 1 Hz were 0.3-1.7 kPa for physically crosslinked scaffolds, and 4-5 kPa (EDC/NHS system) and 15-20 kPa (glutaraldehyde) for chemically crosslinked scaffolds. Intrinsic viscoelasticity and poroelasticity were considered in discussing the physical mechanism dominating in different time/frequency scales. Cell evaluation showed that all samples are available as alternatives to repair and/or substitute cartilage in articular osteoarthritis.

Nanofiber Scaffolds by Electrospinning for Rotator Cuff Tissue Engineering

Rotator cuff tears continue to be at risk of retear or failure to heal after surgical repair, despite the use of various surgical techniques, which stimulate development of novel scaffolding strategies. They should be able to address the known causes of failure after the conventional rotator cuff repair: (1) failure to reproduce the normal tendon healing process, (2) resultant failure to reproduce four zones of the enthesis, and (3) failure to attain sufficient mechanical strength after repair. Nanofiber scaffolds are suited for this application because they can be engineered to mimic the ultrastructure and properties of the native rotator cuff tendon. Among various methods for tissue-engineered nanofibers, electrospinning has recently been highlighted in the rotator cuff field. Electrospinning can create fibrous and porous structures that resemble natural tendon's extracellular matrix. Other advantages include the ability to create relatively large surface-to-volume ratios, the ability to control fiber size from the micro to the nano scale, and the flexibility of material choices. In this review, we will discuss the anatomical and mechanical features of the rotator cuff tendon, their potential impacts on improper healing after repair, and the current knowledge of the use of electrospinning for rotator cuff tissue engineering.

The effects of chitosan-based materials on glioma: Recent advances in its applications for diagnosis and treatment

Glioma is known as the most common primary brain tumor occurring in adolescents and is considered as a lethal disease worldwide. Despite the advancements in presently available therapeutic approaches (i.e. radiation therapy and chemotherapy), the rate of amelioration in glioma patients is still low. In this regard, it seems that there is a need for reconsidering and enhancing current therapies and/or discovering novel therapeutic platforms. Chitosan is a natural polysaccharide with several beneficial characteristics, including biocompatibility, biodegradability, and low toxicity. Without causing toxic effects on healthy cells, chitosan nanoparticles are attractive targets in cancer therapy which lead to the sustained release and enhanced internalization of chemotherapeutic drugs as well as higher cytotoxicity for cancer cells. Hence, these properties turn it into a suitable candidate for the treatment of various cancers, including glioma. In the viewpoint of glioma, cancer inhibition is possible through targeting glioma-associated signaling pathways and molecules such as MMP-9, VEGF, TRAIL and nuclear factor-κB by chitosan and its derivatives. Moreover, it has been acknowledged that chitosan and its derivatives can be applied as a delivery system for carrying a diverse range of therapeutic agents to the tumor site. Besides the anti-glioma effects of chitosan and its derivatives, these molecules can be utilized for culturing glioma cancer cells; providing a better understanding of glioma pathogenesis. Furthermore, it is documented that 3D chitosan scaffolds are potential targets that offer advantageous drug screening platforms. Herein, we summarized the anti-glioma effects of chitosan and also its utilization as drug delivery systems in the treatment of glioma.

Characterization of Bacterial Cellulose-Based Wound Dressing in Different Order Impregnation of Chitosan and Collagen

Bacterial cellulose (BC), chitosan (Chi), and collagen (Col) are known as biopolymers which have met some properties that are required as wound dressing. This study focused on investigating the fabrication of BC-based wound dressing with chitosan and collagen, since chitosan has red blood cells binding and anti-bacterial properties, while collagen can support cell and tissue growth for skin wounds. The BC-based wound dressing was prepared by impregnating BC fibers in the chitosan and/or collagen solution for 24 h. FTIR was used to confirm the intermolecular interaction of amine and hydroxyl group of chitosan and/or collagen in BC-based wound dressing. Furthermore, the XRD diffractogram of the wound dressing show broader peaks at 14.2°, 16.6°, and 22.4° due to the presence of chitosan and collagen molecules in BC fibers. These results were then supported by SEM images which confirmed that chitosan and collagen were well penetrated into BC fibers. TGA curves revealed that BC/Chi/Col has better thermal properties based on the Tmax compare to BC/Col/Chi. Feasibility of the mats to be applied as wound dressing was also supported by other tests, i.e., water content, porosity, and hemocompatibility, which indicates that the wound dressing is classified as nonhemolytic materials. However, BC/Col/Chi was considered a more potential wound dressing to be applied compared to BC/Chi/Col since it has larger pores and showed better antibacterial properties (larger zones of inhibition) against S. aureus and E. coli via disk diffusion tests.

Development of osteogenic chitosan/alginate scaffolds reinforced with silicocarnotite containing apatitic fibers

Porous composite scaffolds of chitosan-alginate (CH-AL) reinforced by biphasic calcium phosphate fibers containing silicon (Si) were prepared using the freeze-drying method. The fibers were synthesized using a homogenous precipitation method with differing reaction times and were characterized by XRD, FTIR, SEM, and ICP-OES. Fibers produced with no Si incorporation using two different reaction times of 4 d and 8 d comprised two phases of hydroxyapatite (∼93-96 wt%) and β-tricalcium phosphate (β-TCP). No new phases were observed by adding 0.8 wt% of Si during 4 d of precipitation. However, the addition of Si to fibers synthesized within 8 d under reflux conditions produced biphasic fibers with 1.9 wt% Si which consisted of a new phase of silicocarnotite (∼94 wt%) associated with the β-TCP phase. The whisker-like fibers were 10-200 µm in length and 0.2-5 µm in width. The physicochemical, mechanical, and biological properties of composite scaffolds fabricated by adding different fiber contents and types were investigated. The scaffolds exhibited favorable microstructures with a high porosity (66-88%) and the interconnected pores varied in size between 40 and 250 µm. Scaffolds containing silicocarnotite showed a significant improvement in their mechanical properties and in vitro bioactivity (using SBF testing and characterization of the apatite layer by ATR-FTIR and SEM/EDS) as well as proliferation, mineralization and adhesion of MG63 cells, when evaluated by MTT assay, alkaline phosphatase, and SEM. Scaffolds reinforced with silicocarnotite fibers also exhibited better mechanical properties and water uptake, compared to ones containing incorporated fibers made of Si. Composite scaffolds reinforced by 50 wt% fibers precipitated after 8 d were superior in terms of their mechanical properties and achieved a compressive strength and modulus of 272 kPa and 4.9 MPa, respectively, which is 400% greater than CH-AL scaffolds. The results indicate that the addition of Si into biphasic fibers, leading to the formation of silicocarnotite, makes silicocarnotite a potential candidate for the bioactive reinforcement of composite scaffolds for bone tissue engineering.

Electrochemical immunosensor with Cu(I)/Cu(II)-chitosan-graphene nanocomposite-based signal amplification for the detection of newcastle disease virus

An electrochemical immunoassay for the ultrasensitive detection of Newcastle disease virus (NDV) was developed using graphene and chitosan-conjugated Cu(I)/Cu(II) (Cu(I)/Cu(II)-Chi-Gra) for signal amplification. Graphene (Gra) was used for both the conjugation of an anti-Newcastle disease virus monoclonal antibody (MAb/NDV) and the immobilization of anti-Newcastle disease virus polyclonal antibodies (PAb/NDV). Cu(I)/Cu(II) was selected as an electroactive probe, immobilized on a chitosan-graphene (Chi-Gra) hybrid material, and detected by differential pulse voltammetry (DPV) after a sandwich-type immune response. Because Gra had a large surface area, many antibodies were loaded onto the electrochemical immunosensor to effectively increase the electrical signal. Additionally, the introduction of Gra significantly increased the loading amount of electroactive probes (Cu(I)/Cu(II)), and the electrical signal was further amplified. Cu(I)/Cu(II) and Cu(I)/Cu(II)-Chi-Gra were compared in detail to characterize the signal amplification ability of this platform. The results showed that this immunosensor exhibited excellent analytical performance in the detection of NDV in the concentration range of 10^0.13 to 10^5.13 EID₅₀/0.1 mL, and it had a detection limit of 10^0.68 EID₅₀/0.1 mL, which was calculated based on a signal-to-noise (S/N) ratio of 3. The resulting immunosensor also exhibited high sensitivity, good reproducibility and acceptable stability.

Biodegradable 131 Iodine-Labeled Microspheres: Potential Transarterial Radioembolization Biomaterial for Primary Hepatocellular Carcinoma Treatment

Transarterial radioembolization with radionuclide-labeled microspheres is successfully used in hepatocellular carcinoma (HCC) treatment, but the non-biodegradability and rapid settlement of the microsphere material are associated with unsatisfied distribution and unable for multiple administrations. In this study, a novel biodegradable chitosan-collagen composite microsphere (CCM) with ideal settlement rate is prepared. The Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) results indicate CCMs have desirable shapes with diameters around 10 µm, and considerable biodegradability within 12 weeks. These CCMs are successfully radiolabeled with ¹³¹ I and processed efficiency of 70.4 MBq mg^-1 of microspheres as well as favorable stability in vitro. Then, ¹³¹ I-CCMs are injected into rats with orthotopic HCC via the hepatic artery which effectively improves the median overall survival from 19 to 44 days (p < 0.05). Single photon emission computed tomography (SPECT/CT) imaging and immunohistochemical analysis indicate well-localized biodistribution and consistent stability of ¹³¹ I-CCMs in the liver over 28 days. Magnetic resonance imaging (MRI) and gross specimens monitoring confirm the inhibited tumor growth after ¹³¹ I-CCMs treatment. In conclusion, these biodegradable ¹³¹ I-CCMs exhibit optimal radiolabeling efficiency, stability, and favorably radioembolization effect for orthotopic HCC in a rodent model, suggesting potential for interventional cancer therapy.

Novel Self-Healing Hydrogel with Injectable, pH-Responsive, Strain-Sensitive, Promoting Wound-Healing, and Hemostatic Properties Based on Collagen and Chitosan

Collagen (COL)-chitosan (CS) composite hydrogels are attracting increasing attention because of their great potential for application as biomaterials. However, conventional COL-CS hydrogels were easily disabled for lack of fully reversible linking in their networks. In this work, we developed a kind of self-healing hydrogel for wound dressing, composed of COL, CS, and dibenzaldehyde-modified PEG₂₀₀₀ via dynamic imine bonds, and the COL/CS hydrogels showed good thermal stability, injectability, and pH sensitivity, ideally promoting wound-healing performance and hemostatic ability. Furthermore, the hydrogel could monitor multiple human motions, especially the facial expression via strain sensitivity. This work offers a new perspective for the biomass-based hydrogels applied in medical field as wound dressing.

Regulation of chondrocyte hypertrophy in an osteochondral interface mimicking gel matrix

Calcified cartilage extracellular matrix (ECM) is a critical interface at the osteochondral junction which plays an important role in maintaining the structural continuity between articular cartilage and subchondral bone. This mineralized network is primarily composed of glycosaminoglycans (GAGs) and collagen type II (col II) and hosts hypertrophic chondrocytes. This work aimed to investigate the effect of gel composition and collagen II content on the behavior and hypertrophic differentiation of ATDC5 cells for regeneration of calcified cartilage tissue. For this purpose, chitosan/collagen type II/nanohydroxyapatite (chi/col II/nHA) composite hydrogels were prepared to mimic the calcified cartilage ECM. ATDC5 cells were encapsulated within the composite gels and the viability, ECM production and hypertrophic gene expression were assessed during culture. All composites were favorable for ATDC5 viability and proliferation, whereas specific ECM production and hypertrophic differentiation were dependent on gel composition. Chitosan: collagen II ratio had an impact on ATDC5 cell fate. Hypertrophic differentiation was best pronounced in chi/col II/nHA 70:30 composition. The results obtained from this study offers a scaffold-based approach for calcified cartilage regeneration and provide an insight for biomimetic design and preparation of more complicated gradient osteochondral units.

Accelerating healing of excisional wound with alginate hydrogel containing naringenin in rat model

Wounds have always been considered as one of the most common physical damages. Therefore, various researches have been conducted to find an appropriate method to improve wound healing process. Among various materials, since hydrogels have appropriate properties for wound healing, they are widely used for this purpose. In this study, to develop a potential wound dressing, different concentrations of naringenin (0%, 1%, 10% and 20%) were incorporated in alginate hydrogel followed by evaluating its characters such as morphology, swelling properties, weight loss, antibacterial activity, releasing profile of the naringenin, hemo-, and cytocompatibility. Finally, to evaluate the effect of developed hydrogels on wound healing, the full-thickness dermal wound model in rat was used. Our results provided that the prepared hydrogels have appropriate porosity (86.7 ± 5.3%) with the interconnected pores. Moreover, weight loss assessment confirmed that fabricated hydrogels have suitable biodegradability (about 89% after 14 days). MTT assay also revealed the positive effect of hydrogels on cell viabilities, and they have no toxicity effect on cells. In vivo study indicated that the prepared hydrogels had better wound closure than the gauze-treated wound (the control), and alginate/20% naringenin group had the best wound closure among other groups. All in all, this study concluded that alginate/naringenin hydrogel has positive effect on wound healing process, and it can be used to treat skin injuries in the clinic. Graphical abstract.

Bisphosphonate-Functionalized Scaffolds for Enhanced Bone Regeneration

The local sustained release of bioactive substances are attracting increasing attention in bone tissue engineering, which is beneficial to bone tissue formation and helps to improve the bone ingrowth ability of a scaffold. Bisphosphonates (BPs), as a representative kind of osteoclast inhibitors, are proven to possess excellent osteogenic induction capability. Accordingly, various physical and chemical strategies are developed to functionalize bone tissue scaffolds with BPs to achieve controlled release profiles. Compared with traditional treatment modalities, local release of BPs from these composite scaffolds will contribute to continuous bone integration without the risk of many complications. This review explores the molecular mechanisms of BPs on bone metabolism and analyzes the appropriate concentrations of BPs that promote bone regeneration. The advanced BP loading strategies, implant modification technologies, and BP-loaded composite scaffolds based on different matrices are summarized. Finally, the latest advances and the future development of BP-modified scaffolds for enhanced bone regeneration are discussed. This article provides leading-edge design strategies of the BP-functionalized bone engineering scaffolds for improved bone repairability.

Nanofibrous poly(vinyl alcohol)/chitosan contained carbonated hydroxyapatite nanoparticles scaffold for bone tissue engineering

A scaffold that mimics the physicochemical structure of bone at the nanoscale level is an attractive alternative to conventional bone grafts, but its development remains a main challenge in bone tissue engineering today. This work describes the fabrication of a nanofibrous poly(vinyl alcohol)/chitosan/carbonated hydroxyapatite (PVA/CS/CHAp) scaffold. CHAp nanoparticles were synthesized using a co-precipitation method, and nanofibrous PVA/CS/CHAp scaffolds were fabricated by electrospinning using CHAp concentrations of 0, 5, 10, 15, and 20 wt%. The physicochemical properties of the scaffolds were evaluated by SEM, XRD, FTIR, and EDS, and the mechanical properties were determined by tensile strength tests. Swelling behavior, protein adsorption onto the scaffold surfaces, surface biomineralization, and cells viability were also evaluated in vitro. The addition of CHAp to the composite decreased the fiber diameter from ∼160 nm at 0 wt% to ∼139 nm at 15 wt% and great agglomerations were evident at 20 wt%. XRD, FTIR, and EDS showed effective incorporation of CHAp into the nanofibrous structure. This CHAp incorporation significantly increased the modulus of the scaffold at PVA/CS/CHAp 15 wt%, with an average 103.86 MPa, but tensile strength was not significantly altered. However, the elongation at break was decreased as the CHAp concentration increased. Swelling capacity of scaffold increases due to CHAp addition. Protein adsorption onto the scaffold increased 2.3fold at 20 wt% when compared to 0 wt%. The PVA/CS/CHAp 15 wt% showed a better bioactivity when compared to PVA/CS/CHAp 0 wt% after immersion of the scaffolds in a simulated body fluid solution for 7 days. Cell viability and cell morphology results reveal that PVA/CS/CHAp able to facilitate osteoblast cells to attach and proliferate. Introducing higher CHAp into the scaffold could increase the cell viability of the scaffold. PVA/CS/CHAp has potential to serve as an alternative scaffold material for bone tissue engineering.

Innovative tailor made dextran based membranes with excellent non-inflammatory response: In vivo assessment

In this work, dextran based membranes with potential to be used as implantable devices in Tissue Engineering and Regenerative Medicine (TERM) were prepared by a straightforward strategy. Briefly, two polymers approved by the Food and Drug Administration, viz. dextran and poly(ε-caprolactone) (PCL) were functionalized with methacrylate moieties, and subjected to photocrosslinking. Employing different weight ratios of each polymer in the formulations allowed to obtain transparent membranes with tunable physicochemical properties and low adverse host tissue response. Independently of the material, all formulations have shown to be thermally stable up to 300 °C whilst variations in the polymer ratio resulted in membranes with different glass transition temperatures (T_g) and flexibility. The swelling capacity ranged from 50% to 200%. On the other hand, in vitro hydrolytic degradation did not show to be material-dependent and all membranes maintained their structural integrity for more than 30 days, losing only 8-12% of their initial weight. Preliminary in vitro biological tests did not show any cytotoxic effect on seeded human dental pulp stem cells (hDPSCs), suggesting that, in general, all membranes are capable of supporting cell adhesion and viability. The in vivo biocompatibility of membranes implanted subcutaneously in rats' dorsum indicate that M100/0 (100%wt dextran) and M25/75 (25 %wt dextran) formulations can be classified as "slight-irritant" and "non-irritant", respectively. From the histological analysis performed on the main tissue organs it was not possible to detect any signs of fibrosis or necrosis thereby excluding the presence of toxic degradation by-products deposited or accumulated in these tissues. In combination, these results suggest that the newly developed formulations hold great potential as engineered devices for biomedical applications, where the biological response of cells and tissues are greatly dependent on the physical and chemical cues provided by the substrate.

Alginate/chitosan hydrogel containing olfactory ectomesenchymal stem cells for sciatic nerve tissue engineering

Regeneration and functional recovery after peripheral nerve damage still remain a significant clinical problem. In this study, alginate/chitosan (alg/chit) hydrogel was used for the transplantation of olfactory ectomesenchymal stem cells (OE-MSCs) to promote peripheral nerve regeneration. The OE-MSCs were isolated from olfactory mucosa biopsies and evaluated by different cell surface markers and differentiation capacity. After creating sciatic nerve injury in a rat model, OE-MSCs were transplanted to the injured area with alg/chit hydrogel which was prepared and well-characterized. The prepared hydrogel had the porosity of 91.3 ± 1.27%, the swelling ratio of 379% after 240 min, weight loss percentages of 80 ± 5.56% after 14 days, and good blood compatibility. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, 4',6-diamidino-2-phenylindole, and LIVE/DEAD staining were done to assay the behavior of OE-MSCs on alg/chit hydrogel and the results confirmed that the hydrogel can provide a suitable substrate for cell survival. For functional analysis, alg/chit hydrogel with and without OE- MSCs was injected into a 3-mm sciatic nerve defect of Wistar rats. The results of the sciatic functional index, hot plate latency, electrophysiological assessment, weight-loss percentage of wet gastrocnemius muscle, and histopathological examination using hematoxylin-eosin and Luxol fast blue staining showed that utilizing alg/chit hydrogel with OE-MSCs to the sciatic nerve defect enhance regeneration compared to the control group and hydrogel without cells.

Chitosan-collagen based film for controlled delivery of a combination of short life anesthetics

The present research was undertaken to develop a chitosan-collagen film for controlled delivery of combinations of local anesthetics. The film has been prepared by casting which is a versatile, rapid and low-cost approach distinguished by high reproducibility. The mechanical, morphological, and physicochemical properties of the films and the impact of the drug loading were evaluated. We showed that the formulations have a good combination of strength and flexibility with high water permeability. Surface morphology investigation indicates a variation in roughness depending on the loaded compound. Release studies were performed in controlled environments and the data processed by the Higuchi model to assess the dynamics of the release. The local anesthetics, lidocaine, tetracaine, and benzocaine, were uniformly distributed within the matrix and released in a rate and magnitude specific for the drug concentration and combination tunable in a range time from 6 h to 24 h. The films dissolve completely in the physiological environment within 24 h without leaving any toxic metabolites as both of the components are recognized as safe. In vitro cytotoxicity and cell proliferation tests performed on human dermal fibroblast demonstrate the biocompatibility and lack of cytotoxicity of the prepared formulations.

Different Molecular Interaction between Collagen and α- or β-Chitin in Mechanically Improved Electrospun Composite

Although collagens from vertebrates are mainly used in regenerative medicine, the most elusive issue in the collagen-based biomedical scaffolds is its insufficient mechanical strength. To solve this problem, electrospun collagen composites with chitins were prepared and molecular interactions which are the cause of the mechanical improvement in the composites were investigated by two-dimensional correlation spectroscopy (2DCOS). The electrospun collagen is composed of two kinds of polymorphs, α- and β-chitin, showing different mechanical enhancement and molecular interactions due to different inherent configurations in the crystal structure, resulting in solvent and polymer susceptibility. The collagen/α-chitin has two distinctive phases in the composite, but β-chitin composite has a relatively homogeneous phase. The β-chitin composite showed better tensile strength with ~41% and ~14% higher strength compared to collagen and α-chitin composites, respectively, due to a favorable secondary interaction, i.e., inter- rather than intra-molecular hydrogen bonds. The revealed molecular interaction indicates that β-chitin prefers to form inter-molecular hydrogen bonds with collagen by rearranging their uncrumpled crystalline regions, unlike α-chitin.

Osteogenic and antiseptic nanocoating by in situ chitosan regulated electrochemical deposition for promoting osseointegration

Ti and titanium alloy have been extensively utilized in the areas of orthopedics and other related fields, however, limited abilities in antibiosis, ossification and vascularization restrict the application of these materials in clinical. In this research, pulse electrochemical deposition was used as a method to make chitosan regulate Ag⁺ and Ca²⁺ in situ, achieving ions' dual regulations and coprecipitation of HA nanoparticles (HA-NPs) and Ag nanoparticles (Ag-NPs) on the surface of Ti. The spherical nanoparticles with even distribution were fabricated by optimizing deposition potential and the concentration of Ag⁺. The physical stabilities of coatings were significantly improved by the chelation among CS, Ag⁺ and Ca²⁺ reducing the release rate of Ag⁺, Ca²⁺. The coatings also exhibited noticeable abilities in anti-bacteria. Bone marrow mesenchymal stem cells (BMSCs) displayed adhesion, proliferation and differentiation abilities on the surface of coatings, at the same time the composite coatings revealed promising capability in inducing BMSCs differentiation to osteoblast, which is proved by the results of fluorescent dye. Similar results also can be found in investigations about vascular endothelial cells, desirable adhesion between cells and materials and proliferation are able to prove that this kind of materials has outstanding biocompatibility with VECs cells. The animal experiments indicated that the composite coatings were biocompatible with smooth muscle, myocardium and lung with slightly negative impacts on liver and kidney. According to the results of alizarin red staining, the calcified nodules were dyed red, which reveal that this material can promote bone formation. Electrochemical method was utilized in this research to successfully construct multifunctional composite coatings, such as antibiosis, osteogenesis and angiogenesis, on the surface of Ti.