Hydrogels based on poly(ethylene oxide) and poly(tetramethylene oxide) or poly(dimethyl siloxane): synthesis, characterization, in vitro protein adsorption and platelet adhesion

Molecular Interaction Mechanisms Between Lubricant-Infused Slippery Surfaces and Mussel-Inspired Polydopamine Adhesive and DOPA Moiety

Lubricant-infused slippery surfaces have recently emerged as promising antifouling coatings, showing potential against proteins, cells, and marine mussels. However, a comprehensive understanding of the molecular binding behaviors and interaction strength of foulants to these surfaces is lacking. In this work, mussel-inspired chemistry based on catechol-containing chemicals including 3,4-dihydroxyphenylalanine (DOPA) and polydopamine (PDA) is employed to investigate the antifouling performance and repellence mechanisms of fluorinated-based slippery surface, and the correlated interaction mechanisms are probed using atomic force microscopy (AFM). Intermolecular force measurements and deposition experiments between PDA and the surface reveal the ability of lubricant film to inhibit the contact of PDA particles with the substrate. Moreover, the binding mechanisms and bond dissociation energy between a single DOPA moiety and the lubricant-infused slippery surface are quantitatively investigated employing single-molecule force spectroscopy based on AFM (SM-AFM), which reveal that the infused lubricant layer can remarkably influence the dissociation forces and weaken the binding strength between DOPA and underneath per-fluorinated monolayer surface. This work provides new nanomechanical insights into the fundamental antifouling mechanisms of the lubricant-infused slippery surfaces against mussel-derived adhesive chemicals, with important implications for the design of lubricant-infused materials and other novel antifouling platforms for various bioengineering and engineering applications.

Tailored Biocompatible Polyurethane-Poly(ethylene glycol) Hydrogels as a Versatile Nonfouling Biomaterial

Polyurethane-based hydrogels are relatively inexpensive and mechanically robust biomaterials with ideal properties for various applications, including drug delivery, prosthetics, implant coatings, soft robotics, and tissue engineering. In this report, a simple method is presented for synthesizing and casting biocompatible polyurethane-poly(ethylene glycol) (PU-PEG) hydrogels with tunable mechanical properties, nonfouling characteristics, and sustained tolerability as an implantable material or coating. The hydrogels are synthesized via a simple one-pot method using commercially available precursors and low toxicity solvents and reagents, yielding a consistent and biocompatible gel platform primed for long-term biomaterial applications. The mechanical and physical properties of the gels are easily controlled by varying the curing concentration, producing networks with complex shear moduli of 0.82-190 kPa, similar to a range of human soft tissues. When evaluated against a mechanically matched poly(dimethylsiloxane) (PDMS) formulation, the PU-PEG hydrogels demonstrated favorable nonfouling characteristics, including comparable adsorption of plasma proteins (albumin and fibrinogen) and significantly reduced cellular adhesion. Moreover, preliminary murine implant studies reveal a mild foreign body response after 41 days. Due to the tunable mechanical properties, excellent biocompatibility, and sustained in vivo tolerability of these hydrogels, it is proposed that this method offers a simplified platform for fabricating soft PU-based biomaterials for a variety of applications.

Biofouling-resistant tubular fluidic devices with magneto-responsive dynamic walls

Biofouling of tubular fluidic devices limits the stability, accuracy, and long-term uses of lab-on-a-chip systems. Healthcare-associated infection by biofilm formations on body-indwelling and extracorporeal tubular medical devices is also a major cause of mortality and morbidity in patients. Although diverse antifouling techniques have been developed to prevent bacterial contamination of fluidic devices based on antimicrobial materials or nanoscale architectures, they still have limitations in biocompatibility, long-term activity, and durability. In this study, a new conceptual tubular fluidic device model that can effectively suppress bacterial contamination based on dynamic surface motions without using bactericidal materials or nanostructures is proposed. The fluidic device is composed of a magneto-responsive multilayered composite. The composite tube can generate dynamic surface deformation with controlled geometries along its inner wall in response to a remote magnetic field. The magnetic field-derived surface wave induces the generation of vortices near the inner wall surface of the tube, enabling sweeping of bacterial cells from the surface. As a result, the dynamic composite tube could effectively prevent biofilm formation for an extended time of 14 days without surface modification with chemical substances or nanostructures.

An Alkaline Based Method for Generating Crystalline, Strong, and Shape Memory Polyvinyl Alcohol Biomaterials

Strong, stretchable, and durable biomaterials with shape memory properties can be useful in different biomedical devices, tissue engineering, and soft robotics. However, it is challenging to combine these features. Semi-crystalline polyvinyl alcohol (PVA) has been used to make hydrogels by conventional methods such as freeze-thaw and chemical crosslinking, but it is formidable to produce strong materials with adjustable properties. Herein, a method to induce crystallinity and produce physically crosslinked PVA hydrogels via applying high-concentration sodium hydroxide into dense PVA polymer is introduced. Such a strategy enables the production of physically crosslinked PVA biomaterial with high mechanical properties, low water content, resistance to injury, and shape memory properties. It is also found that the developed PVA hydrogel can recover 90% of plastic deformation due to extension upon supplying water, providing a strong contraction force sufficiently to lift objects 1100 times more than their weight. Cytocompatibility, antifouling property, hemocompatibility, and biocompatibility are also demonstrated in vitro and in vivo. The fabrication methods of PVA-based catheters, injectable electronics, and microfluidic devices are demonstrated. This gelation approach enables both layer-by-layer and 3D printing fabrications.

Polyvinylpyrrolidone (PVP) hydrogel coating for cylindrical polyurethane scaffolds

The presented study describes a method for the preparation and modification of cylindrical polyurethane structures with polyvinylpyrrolidone (PVP) hydrogel coating. The modified polyurethane scaffolds were fabricated using the phase-inversion technique and intended to be used as a vascular prosthesis. The proposed modification method involves a two-step Fenton-type reaction. Physicochemical analysis (Fourier transform infrared spectroscopy, scanning electron microscopy) confirmed the presence of the hydrogel coating. The influence of PVP and polymerization initiator (cumene hydroperoxide) concentrations on hydrogel's properties were examined. The higher concentrations of reagent were used, the thicker coating was obtained. After modification, the material's surface becomes more hydrophilic in comparison to pristine polyurethane. Cytotoxicity assay (MTT test) confirmed that PVP-coating is not toxic. The introduction of hydrogel coating resulted in a significant decrease in the fibrinogen adsorbed to the material's surface as compared to a non-modified polymer. Platelet adhesion assay demonstrated almost no platelet adhesion to the modified surfaces.

Recent research and development in synthetic polymer-based drug delivery systems

In recent years, there has been increasing recognition that a number of synthetic polymers which have excellent biodegradability and biocompatibility are materials of pharmaceutical importance in the area of drug delivery technology. The aim of this review is to take a closer look at a few synthetic polymer-based drug delivery systems, specially the aliphatic polyesters, polyamides, polyethers, polyorthoesters, polyanhydrides, polyurethanes, hydrogels and dendritic polymers.

Seawater-Induced Healable Underwater Superoleophobic Antifouling Coatings

Creating an artificial surface, mimicking a live fish scale that repels oil underwater and with self-healing properties, would be significant for the development of nontoxic marine antifouling coatings. Here, we report a seawater-induced strategy to create in situ an underwater superoleophobic surface, starting from the coatings of a self-polishing polymer and seawater-responsive polymer-grafted SiO₂ nanoparticles. The coatings' surfaces were able to renew in artificial seawater through the hydrolysis of the superficial self-polishing polymer and its subsequent dissolution. Particularly, the grafted poly(triisopropylsilyl acrylate- co-3-methacryloxypropyltrimethoxysilane) chains could transform into hydrophilic ones via seawater-induced hydrolysis, which additionally strengthened the oil-repellency (zero oil adhesive force) and endowed the surface with excellent antiprotein adsorption characteristics. Because the hydrolysis was limited to the superficial layer of the coatings, it could avoid the water-swelling that instead occurs with conventional underwater superoleophobic coatings, with significant benefits to its durability. We believe that the seawater-induced renewal of underwater superoleophobic surfaces will be useful in extreme marine environments.

Interactions Between Biological Products and Product Packaging and Potential Approaches to Overcome Them

Biological products such as protein-based biopharmaceuticals are playing an important role in the healthcare and pharmaceutical industry. The interaction between biological products and packaging materials has become the focus of many studies since it can reduce the effectiveness of biological products. These interactions are heavily influenced by the surface properties and physicochemical nature of the therapeutic agents and the packaging materials. Therefore, it is critical to understand the interactions between packaging materials and biological products in order to design biocompatible packaging materials and develop approaches to minimize adverse interactions. We describe the interactions that occur when using several common packaging materials, including glass and polymer. We discuss the interaction between these materials and biological products such as blood, blood derivatives, recombinant proteins, monoclonal antibodies, and gene therapeutics. We also summarize approaches for overcoming these interactions. Understanding the interactions between biological materials and packaging materials is critical for the development of novel packaging materials that improve the safety of pharmaceutical products.

Protein Resistant Polymeric Biomaterials

Toward improving implantable medical devices as well as diagnostic performance, the development of polymeric biomaterials having resistance to proteins remains a priority. Herein, we highlight key strategies reported in the recent literature that have relied upon improvement of surface hydrophilicity via direct surface modification methods or with bulk modification using surface modifying additives (SMAs). These approaches have utilized a variety of techniques to incorporate the surface hydrophilization agent, including physisorption, hydrogel network formation, surface grafting, layer-by-layer (LbL) assembly and blending base polymers with SMAs. While poly(ethylene glycol) (PEG) remains the gold standard, new alternatives have emerged such as polyglycidols, poly(2-oxazoline)s (POx), polyzwitterions, and amphiphilic block copolymers. While these new strategies provide encouraging results, the need for improved correlation between in vitro and in vivo protein resistance is critical. This may be achieved by employing complex protein solutions as well as strides to enhance the sensitivity of protein adsorption measurements.

Fabrication of Slippery Lubricant-Infused Porous Surface with High Underwater Transparency for the Control of Marine Biofouling

Marine optical instruments are bearing serious biofouling problem, which affects the accuracy of data collected. To solve the biofouling problem of marine optical instruments, a novel instance of slippery lubricant-infused porous surface (SLIPS) with high underwater-transparency was designed over glass substrate via infusing lubricant into its porous microstructure fabricated with hydrothermal method. The advantage of SLIPS as antibiofouling strategy to marine optical instruments was proven by comparing its underwater optical and antibiofouling performances with three kinds of samples (hydrophilic glass sample, textured hydrophilic glass sample, and superhydrophobic glass sample). The modification of SLIPS enhances the underwater-transparency of glass sample within the wavelength of 500-800 nm, for the infusion of lubricant with lower refractive index than glass substrate. In contrast with hydrophilic surface, textured hydrophilic surface and superhydrophobic surface, SLIPS can significantly inhibit bacterial and algal settlements, thereby maintaining high underwater-transparency in both dynamic and static seawater. The inhibition of bacterial and algal settlements over SLIPS results from its liquid-like property. The contact angle hysteresis of water over SLIPS increases with immersion time in seawater under different conditions (static, dynamic, and vibration conditions). Both dynamic and vibration conditions accelerate the failure of SLIPS exposed in seawater. This research provides valuable information for solving biofouling problem of marine optical instruments with SLIPS.

Designing Bioinspired Anti-Biofouling Surfaces based on a Superwettability Strategy

Anti-biofouling surfaces are of high importance owing to their crucial roles in biosensors, biomedical devices, food processing, the marine industry, etc. However, traditional anti-biofouling surfaces based on either the release of biocidal compounds or surface chemical/physical design cannot satisfy the practical demands when meeting real-world complex conditions. The outstanding performances of natural anti-biofouling surfaces motivate the development of new bioinspired anti-biofouling surfaces. Herein, a novel strategy is proposed for rationally designing bioinspired anti-biofouling surfaces based on superwettability. By utilizing the trapped air cushions or liquid layers, Lotus leaf inspired superhydrophobic surfaces, fish scales inspired underwater superoleophobic surfaces, and Nepenthes pitcher plants inspired omniphobic slippery surfaces have been successfully designed as anti-biofouling surfaces to effectively resist proteins, bacteria, cells, and marine organisms. It is believed that these novel superwettability-based anti-biofouling surfaces will bring a new era to both biomedical technology and the marine industry, and will greatly benefit human health and daily life in the near future.

Double-Walled Microparticles-Embedded Self-Cross-Linked, Injectable, and Antibacterial Hydrogel for Controlled and Sustained Release of Chemotherapeutic Agents

First-line cancer chemotherapy has been prescribed for patients suffered from cancers for many years. However, conventional chemotherapy provides a high parenteral dosage of anticancer drugs over a short period, which may cause serious toxicities and detrimental side effects in healthy tissues. This study aims to develop a new drug delivery system (DDS) composed of double-walled microparticles and an injectable hydrogel for localized dual-agent drug delivery to tumors. The uniform double-walled microparticles loaded with cisplatin (Cis-DDP) and paclitaxel (PTX) were fabricated via coaxial electrohydrodynamic atomization (CEHDA) technique and subsequently were embedded into injectable alginate-branched polyethylenimine. The findings show the uniqueness of CEHDA technique for simply swapping the place of drugs to achieve a parallel or a sequential release profile. This study also presents the simulation of CEHDA technique using computational fluid dynamics (CFD) that will help in the optimization of CEHDA's operating conditions prior to large-scale production of microparticles. The new synthetic hydrogel provides an additional diffusion barrier against Cis-DDP and confines premature release of drugs. In addition, the hydrogel can provide a versatile tool for retaining particles in the tumor resected cavity during the injection after debulking surgery and preventing surgical site infection due to its inherent antibacterial properties. Three-dimensional MDA-MB-231 (breast cancer) spheroid studies demonstrate a superior efficacy and a greater reduction in spheroid growth for drugs released from the proposed composite formulation over a prolonged period, as compared with free drug treatment. Overall, the new core-shell microparticles embedded into injectable hydrogel can serve as a flexible controlled release platform for modulating the release profiles of anticancer drugs and subsequently providing a superior anticancer response.

Polymeric nanobiocomposites for biomedical applications

Polymeric nanobiocomposites have recently become one of the most essential sought after materials for biomedical applications ranging from implants to the creation of gels. Their unique mechanical and biological properties provide them the ability to pass through the highly guarded defense mechanism without undergoing noticeable degradation and initiation of immune responses, which in turn makes them advantageous over the other alternatives. Aligned with the advances in tissue engineering, it is also possible to design three-dimensional extracellular matrix using these polymeric nanobiocomposites that could closely mimic the human tissues. In fact, unique polymer chemistry coupled with nanoparticles could create unique microenvironment that promotes cell growth and differentiation. In addition, the nanobiocomposites can also be devised to carry drugs efficiently to the target site without exhibiting any cytotoxicity as well as to eradicate surgical infections. In this article, an effort has been made to thoroughly review a number of different types/classes of polymeric nanocomposites currently used in biomedical fields. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1241-1259, 2017.

A Biocompatible and Biodegradable Protein Hydrogel with Green and Red Autofluorescence: Preparation, Characterization and In Vivo Biodegradation Tracking and Modeling

Because of its good biocompatibility and biodegradability, albumins such as bovine serum albumin (BSA) and human serum albumin (HSA) have found a wide range of biomedical applications. Herein, we report that glutaraldehyde cross-linked BSA (or HSA) forms a novel fluorescent biological hydrogel, exhibiting new green and red autofluorescence in vitro and in vivo without the use of any additional fluorescent labels. UV-vis spectra studies, in conjunction with the fluorescence spectra studies including emission, excitation and synchronous scans, indicated that three classes of fluorescent compounds are presumably formed during the gelation process. SEM, FTIR and mechanical tests were further employed to investigate the morphology, the specific chemical structures and the mechanical strength of the as-prepared autofluorescent hydrogel, respectively. Its biocompatibility and biodegradability were also demonstrated through extensive in vitro and in vivo studies. More interestingly, the strong red autofluorescence of the as-prepared hydrogel allows for conveniently and non-invasively tracking and modeling its in vivo degradation based on the time-dependent fluorescent images of mice. A mathematical model was proposed and was in good agreement with the experimental results. The developed facile strategy to prepare novel biocompatible and biodegradable autofluorescent protein hydrogels could significantly expand the scope of protein hydrogels in biomedical applications.

An automated integrated platform for rapid and sensitive multiplexed protein profiling using human saliva samples

During the last decade, saliva has emerged as a potentially ideal diagnostic biofluid for noninvasive testing. In this paper, we present an automated, integrated platform useable by minimally trained personnel in the field for the diagnosis of respiratory diseases using human saliva as a sample specimen. In this platform, a saliva sample is loaded onto a disposable microfluidic chip containing all the necessary reagents and components required for saliva analysis. The chip is then inserted into the automated analyzer, the SDReader, where multiple potential protein biomarkers for respiratory diseases are measured simultaneously using a microsphere-based array via fluorescence sandwich immunoassays. The results are read optically, and the images are analyzed by a custom-designed algorithm. The fully automated assay requires as little as 10 μL of saliva sample, and the results are reported in 70 min. The performance of the platform was characterized by testing protein standard solutions, and the results were comparable to those from the 3.5 h lab bench assay that we have previously reported. The device was also deployed in two clinical environments where 273 human saliva samples collected from different subjects were successfully tested, demonstrating the device's potential to assist clinicians with the diagnosis of respiratory diseases by providing timely protein biomarker profiling information. This platform, which combines noninvasive sample collection and fully automated analysis, can also be utilized in point-of-care diagnostics.

Development of high refractive ZnS/PVP/PDMAA hydrogel nanocomposites for artificial cornea implants

A series of high refractive index (RI) ZnS/PVP/PDMAA hydrogel nanocomposites containing ZnS nanoparticles (NPs) were successfully synthesized via a simple ultraviolet-light-initiated free radical co-polymerization method. The average diameter of the ZnS NPs is ∼ 3 nm and the NPs are well dispersed and stabilized in the PVP/PDMAA hydrogel matrix up to a high content of 60 wt.% in the hydrogel nanocomposites. The equilibrium water content of ZnS/PVP/PDMAA hydrogel nanocomposites varied from 82.0 to 66.8 wt.%, while the content of mercaptoethanol-capped ZnS NPs correspondingly varied from 30 to 60 wt.%. The resulting nanocomposites are clear and transparent and their RIs were measured to be as high as 1.58-1.70 and 1.38-1.46 in the dry and hydrated states, respectively, which can be tuned by varying the ZnS NPs content. In vitro cytotoxicity assays suggested that the introduction of ZnS NPs added little cytotoxicity to the PVP/PDMAA hydrogel and all the hydrogel nanocomposites exhibited minimal cytotoxicity towards common cells. The hydrogel nanocomposites implanted in rabbit eyes can be well tolerated over 3 weeks. Hence, the high RI ZnS/PVP/PDMAA hydrogel nanocomposites with adjustable RIs developed in this work might potentially be a candidate material for artificial corneal implants.

Mechanically strong and stretchable polyurethane–urea supramolecular hydrogel using water as an additional in situ chain extender

Polyurethane–urea supramolecular hydrogel with excellent mechanical and processible properties is developed. The mechanical properties including shear modulus, elongation at break, tensile strength and compression stress can be adjusted by altering the diisocyanate content.

Bioresponsive hydrogels

Bioresponsive hydrogels are emerging with technological significance in targeted drug delivery, biosensors, and regenerative medicine. Their ability to respond to specific biologically derived stimuli creates a design challenge in effectively linking the conferred biospecificity with an engineered response tailored to the needs of a particular application. Moreover, the fundamental phenomena governing the response must support an appropriate dynamic range, limit of detection, and the potential for feedback control. The design of these systems is inherently complicated due to the high interdependency of the governing phenomena that guide sensing, transduction, and actuation of the hydrogel. Future advancements in bioresponsive hydrogels will out of necessity contain control loops similar to synthetic metabolic pathways. The use of these materials will continue to expand as they become coupled and integrated with new technologies.

Biochemically and topographically engineered poly(ethylene glycol) diacrylate hydrogels with biomimetic characteristics as substrates for human corneal epithelial cells

Incorporation of biophysical and biochemical cues into the design of biomaterials is an important strategy for tissue engineering, the design of biomedical implants and cell culture. Hydrogels synthesized from poly(ethylene glycol) diacrylate (PEGDA) were investigated as a platform to simultaneously present human corneal epithelial cells (HCECs) in vitro with topography and adhesion peptides to mimic the native physical and chemical attributes of the basement membrane underlying the epithelium in vivo. Hydrogels synthesized from aqueous solutions of 20% PEGDA (M(w) = 3400 g/mol) prevented nonspecific cell adhesion and were functionalized with the integrin-binding peptide Arg-Gly-Asp (RGD) in concentrations from 5 to 20 mM. The hydrogels swelled minimally after curing and were molded with ridge and groove features with lateral dimensions from 200 to 2000 nm and 300-nm depth. HCECs were cultured on topographic surfaces functionalized with RGD and compared with control unfunctionalized topographic substrates. HCEC alignment, either parallel or perpendicular to ridges, was influenced by the culture media on substrates promoting nonspecific attachment. In contrast, the alignment of HCECs cultured on RGD hydrogels showed substantially less dependence on the culture media. In the latter case, the moldable RGD-functionalized hydrogels allowed for decoupling the cues from surface chemistry, soluble factors, and topography that simultaneously impact HCEC behavior.

Synthesis of macroporous poly(dimethylsiloxane) scaffolds for tissue engineering applications

Macroporous, biostable scaffolds with controlled porous architecture were prepared from poly(dimethylsiloxane) (PDMS) using sodium chloride particles and a solvent casting and particulate leaching technique. The effect of particulate size range and overall porosity on the resulting structure was evaluated. Results found 90% v/v scaffolds and particulate ranges above 100 μm to have the most optimal open framework and porosity. Resulting hydrophobic PDMS scaffolds were coated with fibronectin and evaluated as a platform for adherent cell culture using human mesenchymal stem cells. Biocompatibility of PDMS scaffolds was also evaluated in a rodent model, where implants were found to be highly biocompatible and biostable, with positive extracellular matrix deposition throughout the scaffold. These results demonstrate the suitability of macroporous PDMS scaffolds for tissue engineering applications where strong integration with the host is desired.

Synthesis and characterization of polyurethane-block-poly(2-hydroxyethyl methacrylate) hydrogels and their surface modification to promote cell affinity

Physically crosslinked hydrogels based on poly(2-hydroxyethyl methacrylate) (PHEMA) and polyurethane macroiniferter (PUMI) were prepared. The synthesis of polyurethane- block-poly(2-hydroxyethyl methacrylate) (PU-b-PHEMA) was verified by spectroscopic analyses. Due to the low fibronectin adsorption from culture media, cell attachment on PU-b-PHEMA surface was poor compared with the PUMI control. To improve the cell affinity of PU-b-PHEMA, fibronectin was conjugated via surface hydroxyl groups. These biomimetic PU-b-PHEMA hydrogel surfaces were tested for tissue engineering applications. A short-term cell culture study revealed that, compared with the unmodified PU-b-PHEMA, fibronectin-conjugated PU-b-PHEMA hydrogel showed more uniform and dense cell attachment and spreading, indicating a potential use for tissue engineering applications.

PCL-based Shape Memory Polymers with Variable PDMS Soft Segment Lengths

Thermoresponsive shape memory polymers (SMPs) are stimuli-responsive materials that return to their permanent shape from a temporary shape in response to heating. The design of new SMPs which obtain a broader range of properties including mechanical behavior is critical to realize their potential in biomedical as well as industrial and aerospace applications. To tailor the properties of SMPs, "AB networks" comprised of two distinct polymer components have been investigated but are overwhelmingly limited to those in which both components are organic. In this present work, we prepared inorganic-organic SMPs comprised of inorganic polydimethyl-siloxane (PDMS) segments of varying lengths and organic poly(ε-caprolactone) (PCL) segments. PDMS has a particularly low T(g) (-125 °C) which makes it a particularly effective soft segment to tailor the mechanical properties of PCL-based SMPs. The SMPs were prepared via the rapid photocure of solutions of diacrylated PCL(40)-block-PDMS(m)-block-PCL(40) macromers (m = 20, 37, 66 and 130). The resulting inorganic-organic SMP networks exhibited excellent shape fixity and recovery. By changing the PDMS segment length, the thermal, mechanical, and surface properties were systematically altered.

Application of MS-based proteomics to study serum protein adsorption/absorption and complement C3 activation on poly(ethylene glycol) hydrogels

Although the interaction between cells and poly(ethylene glycol) (PEG) hydrogels is well documented, there lacks a thorough investigation into the adsorption of blood proteins on these surfaces which dictates the observed cellular and in vivo host response. Thus, a clear understanding of how surface-bound proteins mediate the unique biological property of PEG hydrogels is fundamentally important. The information obtained will also provide insights into future biomaterial design. In this study, several mass-spectrometrybased proteomic tools coupled with complementary immunoassays were employed to survey the complex surface-bound serum proteome. The adsorption of vitronectin, thrombin, fibrinogen and complement component C3 was significantly lower on PEG hydrogels than on tissue culture polystyrene (TCPS). Although PEG hydrogels mediated lower C3 adsorption than TCPS, the extent of C3 activation between the two surfaces was comparable. Adherent monocyte density was also significantly lower on PEG hydrogels as compared to TCPS. Taken together, these results support the critical role of the complement C3 in mediating monocyte adhesion on biomaterials. Thus we conclude that the biocompatibility of PEG hydrogels both in vitro and in vivo can be partly contributed to their limited C3 interaction and monocyte activity.

The role of complement C3 and fibrinogen in monocyte adhesion to PEO-like plasma deposited tetraglyme

The role of complement C3 in mediating adhesion of monocytes to plasma deposited tetraglyme surfaces was studied. Although fibrinogen (Fg) is usually considered the main factor in mediating phagocyte attachment, plasma deposited PEO-like tetraethylene glycol dimethyl ether (tetraglyme) coatings that have ultra-low Fg adsorption (<10 ng cm(-2)) from low concentration solutions and low monocyte adhesion in vitro still show high phagocyte adhesion after short implantations and later become encapsulated when tested in vivo. To test whether higher Fg adsorption under in vivo conditions could explain the higher in vivo reactivity, we again measured the resistance of tetraglyme films to Fg adsorption. We found a surprising and previously unreported increased amount of adsorbed Fg on tetraglyme surfaces from higher concentration protein solutions. However, monocyte adhesion to tetraglyme did not markedly increase despite the increased Fg adsorption. We thus suspected proteins other than Fg must be responsible for the increased in vivo reactivity. We found that on tetraglyme preadsorbed with C3-depleted serum, monocyte adhesion was greatly reduced as compared to samples adsorbed with normal serum. Addition of exogenous pure C3 to the serum used to preadsorb the surfaces restored monocyte adhesion to tetraglyme coatings. While Fg clearly plays an important role in mediating monocyte adhesion to tetraglyme surfaces, the results show an additional role for adsorbed C3 in monocyte adhesion.

Microfluidic cell culture systems for drug research

In pharmaceutical research, an adequate cell-based assay scheme to efficiently screen and to validate potential drug candidates in the initial stage of drug discovery is crucial. In order to better predict the clinical response to drug compounds, a cell culture model that is faithful to in vivo behavior is required. With the recent advances in microfluidic technology, the utilization of a microfluidic-based cell culture has several advantages, making it a promising alternative to the conventional cell culture methods. This review starts with a comprehensive discussion on the general process for drug discovery and development, the role of cell culture in drug research, and the characteristics of the cell culture formats commonly used in current microfluidic-based, cell-culture practices. Due to the significant differences in several physical phenomena between microscale and macroscale devices, microfluidic technology provides unique functionality, which is not previously possible by using traditional techniques. In a subsequent section, the niches for using microfluidic-based cell culture systems for drug research are discussed. Moreover, some critical issues such as cell immobilization, medium pumping or gradient generation in microfluidic-based, cell-culture systems are also reviewed. Finally, some practical applications of microfluidic-based, cell-culture systems in drug research particularly those pertaining to drug toxicity testing and those with a high-throughput capability are highlighted.

Shape memory polymers with silicon-containing segments

Thermoresponsive shape memory polymers are stimuli-responsive materials whose shape is modulated by heat. They have been investigated as smart materials in a variety of biomedical, industrial and aerospace applications. The vast majority of shape memory polymers have been limited to those prepared from organic polymers. In this present work, shape memory polymers comprised of inorganic silicon-containing polymer segments (polydimethylsiloxane, PDMS) and organic poly(ε-caprolactone) (PCL) segments were developed. Because of its low T g, PDMS served as a highly effective soft segment. The photochemical cure of diacrylated PCL n -block-PDMS37-block-PCL n macromers with tailored PCL segment lengths produced networks with excellent mechanical properties, shape fixity, and shape recovery.